[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031377] tsc: Fast TSC calibration using PIT [ 0.031384] tsc: Detected 2800.068 MHz processor [ 0.031386] tsc: Detected 2800.056 MHz TSC [ 0.053421] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053427] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053434] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.053436] Disabled [ 0.053439] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053450] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053538] Scanning 1 areas for low memory corruption [ 0.055483] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.132170] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.134397] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.134440] ACPI: Early table checksum verification disabled [ 0.149168] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.149181] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149241] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.149364] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.149377] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.149387] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.149397] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.149411] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149424] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149436] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149448] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149461] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149473] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149485] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149499] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149510] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149523] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149536] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.149548] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.149561] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.149573] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.149585] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.149623] ACPI: Local APIC address 0xfee00000 [ 0.149626] Setting APIC routing to Xen PV. [ 0.150674] Zone ranges: [ 0.150680] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.150684] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.150686] Normal empty [ 0.150688] Movable zone start for each node [ 0.150689] Early memory node ranges [ 0.150691] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.150693] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.150696] Reserved but unavailable: 1 pages [ 0.150699] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.150703] On node 0 totalpages: 131071 [ 0.150706] DMA zone: 64 pages used for memmap [ 0.150707] DMA zone: 21 pages reserved [ 0.150708] DMA zone: 3997 pages, LIFO batch:0 [ 0.150898] DMA32 zone: 1986 pages used for memmap [ 0.150899] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.157464] p2m virtual area at (____ptrval____), size is 40000000 [ 0.353620] Remapped 98 page(s) [ 0.354090] ACPI: PM-Timer IO Port: 0x808 [ 0.354098] ACPI: Local APIC address 0xfee00000 [ 0.354292] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.354354] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.354364] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.354401] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.354410] ACPI: IRQ0 used by override. [ 0.354411] ACPI: IRQ9 used by override. [ 0.354445] Using ACPI (MADT) for SMP configuration information [ 0.354450] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.354457] ACPI: SPCR: SPCR table version 1 [ 0.354462] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.354473] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.354505] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.354507] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.354509] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.354513] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.354534] Booting paravirtualized kernel on Xen [ 0.354536] Xen version: 4.16-rc (preserve-AD) [ 0.354543] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.506695] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.506722] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.508084] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.508098] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.508100] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.508249] xen: PV spinlocks enabled [ 0.508256] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.508266] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.508272] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.508698] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.508845] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.607141] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.613086] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.613265] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.614806] rcu: Hierarchical RCU implementation. [ 0.614808] rcu: RCU event tracing is enabled. [ 0.614811] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.614814] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.615823] Using NULL legacy PIC [ 0.615826] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.615911] xen:events: Using FIFO-based ABI [ 0.615987] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.615994] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.616002] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.616009] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.616015] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.616020] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.616026] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.616032] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.616038] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.616043] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.616049] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.616055] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.616061] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.616067] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.616072] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.622360] Console: colour VGA+ 80x25 [ 0.638200] console [tty0] enabled [ 0.638723] console [hvc0] enabled [ 0.638885] ACPI: Core revision 20180810 [ 0.645822] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.646081] Xen: using vcpuop timer interface [ 0.646091] installing Xen timer for CPU 0 [ 0.646378] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c75c722b, max_idle_ns: 440795310849 ns [ 0.646684] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.11 BogoMIPS (lpj=2800056) [ 0.646979] pid_max: default: 32768 minimum: 301 [ 0.647181] Security Framework initialized [ 0.647654] SELinux: Initializing. [ 0.647884] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.648047] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.648675] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.648833] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.649006] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.649252] Spectre V2 : Mitigation: Full AMD retpoline [ 0.649404] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.649966] Freeing SMP alternatives memory: 36K [ 0.652866] cpu 0 spinlock event irq 57 [ 0.653034] VPMU disabled by hypervisor. [ 0.653402] Performance Events: PMU not available due to virtualization, using software events only. [ 0.653745] rcu: Hierarchical SRCU implementation. [ 0.654262] smp: Bringing up secondary CPUs ... [ 0.654607] installing Xen timer for CPU 1 [ 0.655154] cpu 1 spinlock event irq 69 [ 0.655726] installing Xen timer for CPU 2 [ 0.656277] cpu 2 spinlock event irq 76 [ 0.656829] installing Xen timer for CPU 3 [ 0.657256] cpu 3 spinlock event irq 83 [ 0.657826] installing Xen timer for CPU 4 [ 0.658301] cpu 4 spinlock event irq 90 [ 0.658824] installing Xen timer for CPU 5 [ 0.659273] cpu 5 spinlock event irq 97 [ 0.659831] installing Xen timer for CPU 6 [ 0.660293] cpu 6 spinlock event irq 104 [ 0.660820] installing Xen timer for CPU 7 [ 0.661276] cpu 7 spinlock event irq 111 [ 0.661646] smp: Brought up 1 node, 8 CPUs [ 0.661801] smpboot: Max logical packages: 1 [ 0.662644] devtmpfs: initialized [ 0.662863] x86/mm: Memory block size: 128MB [ 0.663857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.664121] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.664121] RTC time: 16:56:50, date: 11/23/21 [ 0.664265] NET: Registered protocol family 16 [ 0.664448] xen:grant_table: Grant tables using version 1 layout [ 0.664724] Grant table initialized [ 0.665194] audit: initializing netlink subsys (disabled) [ 0.665754] audit: type=2000 audit(1637686611.317:1): state=initialized audit_enabled=0 res=1 [ 0.666770] node 0 link 1: io port [e000, ffff] [ 0.666770] TOM: 00000000c0000000 aka 3072M [ 0.666770] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.666770] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.666770] node 0 link 1: mmio [fec80000, fecbffff] [ 0.666770] TOM2: 0000000840000000 aka 33792M [ 0.666770] bus: [bus 00-3f] on node 0 link 1 [ 0.666770] bus: 00 [io 0x0000-0xffff] [ 0.666770] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.666770] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.666770] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.667803] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.668075] ACPI: bus type PCI registered [ 0.668075] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.668198] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.681767] PCI: Using configuration type 1 for base access [ 0.689711] ACPI: Added _OSI(Module Device) [ 0.689711] ACPI: Added _OSI(Processor Device) [ 0.689711] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.689711] ACPI: Added _OSI(Processor Aggregator Device) [ 0.689711] ACPI: Added _OSI(Linux-Dell-Video) [ 0.689855] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.691652] random: fast init done [ 0.693770] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.694290] xen: registering gsi 9 triggering 0 polarity 1 [ 0.694726] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.698703] ACPI: Interpreter enabled [ 0.698878] ACPI: (supports S0 S4 S5) [ 0.700641] ACPI: Using IOAPIC for interrupt routing [ 0.700851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.701379] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.719172] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.719375] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.720325] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.720628] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.722737] PCI host bridge to bus 0000:00 [ 0.722890] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.723053] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.723224] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.723379] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.723535] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.723639] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.723902] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.724140] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.724383] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.724629] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.724639] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.724902] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.725082] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.725640] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.725812] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.725812] pci 0000:00:02.0: enabling Extended Tags [ 0.726067] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.726639] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.726639] pci 0000:00:09.0: enabling Extended Tags [ 0.726639] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.726743] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.726792] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.726811] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.726831] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.726851] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.726871] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.726897] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.726951] pci 0000:00:11.0: set SATA to AHCI mode [ 0.727640] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.727640] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.727758] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.727758] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.727788] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.727834] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.728015] pci 0000:00:12.2: supports D1 D2 [ 0.728017] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.728637] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.728637] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.728677] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.728677] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.728707] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.728754] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.728935] pci 0000:00:13.2: supports D1 D2 [ 0.728937] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.729637] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.729677] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.729677] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.729677] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.729677] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.729677] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.729677] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.729718] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.730638] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.730691] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.730691] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.730700] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.730760] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.731639] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.731675] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.731694] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.731763] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.731763] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.731866] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.732686] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.732686] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.732686] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.732686] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.732686] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.732686] pci 0000:01:00.0: enabling Extended Tags [ 0.732686] pci 0000:01:00.0: supports D1 D2 [ 0.732769] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.732925] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.732930] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.733638] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.733638] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.733638] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.733638] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.733757] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.733809] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.734048] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.734682] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.734682] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.734682] pci_bus 0000:03: extended config space not accessible [ 0.734732] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.734732] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.734732] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.734743] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.735639] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.735639] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.735639] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.735639] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.735639] pci_bus 0000:00: on NUMA node 0 [ 0.735639] xen: registering gsi 13 triggering 1 polarity 0 [ 0.737474] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.737720] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.737998] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.738262] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.738503] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.738733] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.738970] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.739209] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.739460] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.739698] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.739944] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.740180] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.740420] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.740694] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.740935] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.741168] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.741410] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.741658] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.741897] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.742160] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.742401] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.742645] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.742887] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.743126] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.743367] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.743609] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.743729] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.743966] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.744207] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.744445] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.744699] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.744943] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.745640] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.745670] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.745952] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.746244] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.746553] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.746755] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.747027] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.747313] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.747855] xen:balloon: Initialising balloon driver [ 0.748699] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.748839] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.748839] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.748839] vgaarb: loaded [ 0.749635] SCSI subsystem initialized [ 0.749789] libata version 3.00 loaded. [ 0.749789] ACPI: bus type USB registered [ 0.749839] usbcore: registered new interface driver usbfs [ 0.749856] usbcore: registered new interface driver hub [ 0.750704] usbcore: registered new device driver usb [ 0.750704] pps_core: LinuxPPS API ver. 1 registered [ 0.750704] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.750746] PTP clock support registered [ 0.751703] EDAC MC: Ver: 3.0.0 [ 0.752070] Advanced Linux Sound Architecture Driver Initialized. [ 0.752070] PCI: Using ACPI for IRQ routing [ 0.757276] PCI: pci_cache_line_size set to 64 bytes [ 0.757458] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.757620] Expanded resource Reserved due to conflict with Reserved [ 0.757640] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.757643] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.757946] NetLabel: Initializing [ 0.758131] NetLabel: domain hash size = 128 [ 0.758308] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.758502] NetLabel: unlabeled traffic allowed by default [ 0.758954] clocksource: Switched to clocksource tsc-early [ 0.777240] VFS: Disk quotas dquot_6.6.0 [ 0.777491] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.777712] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.778077] pnp: PnP ACPI init [ 0.778542] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.778575] xen: registering gsi 8 triggering 1 polarity 0 [ 0.778627] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.779031] xen: registering gsi 4 triggering 1 polarity 0 [ 0.779034] Already setup the GSI :4 [ 0.779340] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.779718] xen: registering gsi 3 triggering 1 polarity 0 [ 0.779814] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.781367] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.781524] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.781688] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.781844] system 00:04: [io 0x0dff] has been reserved [ 0.782021] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.782223] system 00:04: [io 0x0eff] has been reserved [ 0.782392] system 00:04: [io 0x040b] has been reserved [ 0.782543] system 00:04: [io 0x04d6] has been reserved [ 0.782699] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.782855] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.783011] system 00:04: [io 0x0c14] has been reserved [ 0.783196] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.783357] system 00:04: [io 0x0c6c] has been reserved [ 0.783549] system 00:04: [io 0x0c6f] has been reserved [ 0.783704] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.783858] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.784014] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.784178] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.784336] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.784516] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.784681] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.784833] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.785026] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.785182] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.785336] system 00:04: [io 0x0950] has been reserved [ 0.785505] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.785587] pnp 00:05: [irq 0 disabled] [ 0.785663] system 00:05: [io 0x0ca8] has been reserved [ 0.785815] system 00:05: [io 0x0cac] has been reserved [ 0.785978] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.787436] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.787617] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.787935] pnp: PnP ACPI: found 7 devices [ 0.801485] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.801807] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.801962] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.802124] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.802297] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.802455] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.802628] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.802828] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.803031] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.803293] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.803294] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.803296] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.803297] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.803298] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.803300] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.803301] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.803302] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.803303] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.803305] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.803306] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.803308] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.803309] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.803310] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.803312] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.803313] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.803315] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.803316] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.803317] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.803319] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.803320] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.803321] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.803322] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.803324] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.803325] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.803326] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.803327] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.803475] NET: Registered protocol family 2 [ 0.803889] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.804163] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.804382] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.804582] TCP: Hash tables configured (established 4096 bind 4096) [ 0.804836] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.805000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.805268] NET: Registered protocol family 1 [ 0.806119] RPC: Registered named UNIX socket transport module. [ 0.806303] RPC: Registered udp transport module. [ 0.806482] RPC: Registered tcp transport module. [ 0.806631] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.807549] xen: registering gsi 16 triggering 0 polarity 1 [ 0.807619] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.936895] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 126464 usecs [ 0.937253] xen: registering gsi 16 triggering 0 polarity 1 [ 0.937269] Already setup the GSI :16 [ 0.937577] xen: registering gsi 17 triggering 0 polarity 1 [ 0.937655] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.937816] xen: registering gsi 18 triggering 0 polarity 1 [ 0.937829] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.937969] xen: registering gsi 18 triggering 0 polarity 1 [ 0.937971] Already setup the GSI :18 [ 0.938246] xen: registering gsi 19 triggering 0 polarity 1 [ 0.938269] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.938474] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.938728] PCI: CLS 64 bytes, default 64 [ 0.938854] Unpacking initramfs... [ 1.374260] Freeing initrd memory: 27456K [ 1.374622] kvm: no hardware support [ 1.374807] has_svm: svm not available [ 1.374951] kvm: no hardware support [ 1.378027] Scanning for low memory corruption every 60 seconds [ 1.379622] Initialise system trusted keyrings [ 1.379937] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.382819] NFS: Registering the id_resolver key type [ 1.383057] Key type id_resolver registered [ 1.383206] Key type id_legacy registered [ 1.391260] Key type asymmetric registered [ 1.391449] Asymmetric key parser 'x509' registered [ 1.391701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.391946] io scheduler noop registered [ 1.392094] io scheduler deadline registered [ 1.392356] io scheduler cfq registered (default) [ 1.392506] io scheduler mq-deadline registered [ 1.392680] io scheduler kyber registered [ 1.393774] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.393958] xen: registering gsi 52 triggering 0 polarity 0 [ 1.394019] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.394439] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.394593] xen: registering gsi 53 triggering 0 polarity 0 [ 1.394607] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.394894] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.395105] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.395651] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.395939] ACPI: Power Button [PWRF] [ 1.396928] Warning: Processor Platform Limit not supported. [ 1.397523] xen:xen_evtchn: Event-channel device installed [ 1.397851] xen_pciback: backend is vpci [ 1.399214] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.420682] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.422403] hpet_acpi_add: no address or irqs in _CRS [ 1.422717] Non-volatile memory driver v1.3 [ 1.422960] AMD IOMMUv2 driver by Joerg Roedel [ 1.423119] AMD IOMMUv2 functionality not available on this system [ 1.428632] loop: module loaded [ 1.436066] ahci 0000:00:11.0: version 3.0 [ 1.436328] xen: registering gsi 22 triggering 0 polarity 1 [ 1.436386] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.436594] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.436913] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.438322] scsi host0: ahci [ 1.438991] scsi host1: ahci [ 1.439590] scsi host2: ahci [ 1.440211] scsi host3: ahci [ 1.440582] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.440853] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.441095] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.441372] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.441960] tun: Universal TUN/TAP device driver, 1.6 [ 1.442350] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.442504] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.442711] sky2: driver version 1.30 [ 1.442971] xen_netfront: Initialising Xen virtual ethernet driver [ 1.443424] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.443581] ehci-pci: EHCI PCI platform driver [ 1.443949] xen: registering gsi 17 triggering 0 polarity 1 [ 1.443965] Already setup the GSI :17 [ 1.444282] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.444553] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.444813] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.445078] ehci-pci 0000:00:12.2: debug port 1 [ 1.445461] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.451724] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.452019] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.452267] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.452519] usb usb1: Product: EHCI Host Controller [ 1.452708] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.452862] usb usb1: SerialNumber: 0000:00:12.2 [ 1.453424] hub 1-0:1.0: USB hub found [ 1.453582] hub 1-0:1.0: 6 ports detected [ 1.454226] xen: registering gsi 19 triggering 0 polarity 1 [ 1.454244] Already setup the GSI :19 [ 1.454472] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.454761] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.455012] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.455327] ehci-pci 0000:00:13.2: debug port 1 [ 1.455660] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.463740] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.464052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.464303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.464543] usb usb2: Product: EHCI Host Controller [ 1.464710] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.464911] usb usb2: SerialNumber: 0000:00:13.2 [ 1.465436] hub 2-0:1.0: USB hub found [ 1.465594] hub 2-0:1.0: 6 ports detected [ 1.466061] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.466282] ohci-pci: OHCI PCI platform driver [ 1.466700] xen: registering gsi 16 triggering 0 polarity 1 [ 1.466714] Already setup the GSI :16 [ 1.466928] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.467229] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.467651] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.523844] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.524148] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.524401] usb usb3: Product: OHCI PCI host controller [ 1.524555] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.524740] usb usb3: SerialNumber: 0000:00:12.0 [ 1.525222] hub 3-0:1.0: USB hub found [ 1.525383] hub 3-0:1.0: 3 ports detected [ 1.525899] xen: registering gsi 16 triggering 0 polarity 1 [ 1.525910] Already setup the GSI :16 [ 1.526146] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.526518] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.526858] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.582878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.583183] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.583450] usb usb4: Product: OHCI PCI host controller [ 1.583603] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.583762] usb usb4: SerialNumber: 0000:00:12.1 [ 1.584307] hub 4-0:1.0: USB hub found [ 1.584474] hub 4-0:1.0: 3 ports detected [ 1.585059] xen: registering gsi 18 triggering 0 polarity 1 [ 1.585077] Already setup the GSI :18 [ 1.585306] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.585662] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.586069] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.641872] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.642187] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.642463] usb usb5: Product: OHCI PCI host controller [ 1.642616] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.642795] usb usb5: SerialNumber: 0000:00:13.0 [ 1.643383] hub 5-0:1.0: USB hub found [ 1.643544] hub 5-0:1.0: 3 ports detected [ 1.644137] xen: registering gsi 18 triggering 0 polarity 1 [ 1.644155] Already setup the GSI :18 [ 1.644394] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.644725] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.645062] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.700868] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.701165] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.701407] usb usb6: Product: OHCI PCI host controller [ 1.701559] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.701723] usb usb6: SerialNumber: 0000:00:13.1 [ 1.702345] hub 6-0:1.0: USB hub found [ 1.702516] hub 6-0:1.0: 3 ports detected [ 1.702930] uhci_hcd: USB Universal Host Controller Interface driver [ 1.703257] usbcore: registered new interface driver usblp [ 1.703456] usbcore: registered new interface driver usb-storage [ 1.703679] i8042: PNP: No PS/2 controller found. [ 1.703830] i8042: Probing ports directly. [ 1.707037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.707270] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.707755] rtc_cmos 00:01: RTC can wake from S4 [ 1.708284] rtc_cmos 00:01: registered as rtc0 [ 1.708478] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.708804] device-mapper: uevent: version 1.0.3 [ 1.709114] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.709409] hidraw: raw HID events driver (C) Jiri Kosina [ 1.709844] usbcore: registered new interface driver usbhid [ 1.709997] usbhid: USB HID core driver [ 1.711599] Initializing XFRM netlink socket [ 1.711990] NET: Registered protocol family 10 [ 1.712675] Segment Routing with IPv6 [ 1.713504] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.713952] NET: Registered protocol family 17 [ 1.714146] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.714491] Key type dns_resolver registered [ 1.715831] mce: Using 2 MCE banks [ 1.716030] sched_clock: Marking stable (1685195740, 30546064)->(1720542325, -4800521) [ 1.717420] registered taskstats version 1 [ 1.717573] Loading compiled-in X.509 certificates [ 1.718287] Magic number: 13:348:945 [ 1.718547] cpuid cpu0: hash matches [ 1.718737] tty tty2: hash matches [ 1.718987] processor cpu0: hash matches [ 1.719818] ata3: SATA link down (SStatus 0 SControl 300) [ 1.720070] ata2: SATA link down (SStatus 0 SControl 300) [ 1.720315] console [netcon0] enabled [ 1.720489] netconsole: network logging started [ 1.722346] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.723809] ata1: SATA link down (SStatus 0 SControl 300) [ 1.724082] ata4: SATA link down (SStatus 0 SControl 300) [ 1.734519] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.734863] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.735123] cfg80211: failed to load regulatory.db [ 1.735347] ALSA device list: [ 1.735494] No soundcards found. [ 1.737392] Freeing unused kernel image memory: 1344K [ 1.748832] Write protecting the kernel read-only data: 18432k [ 1.758828] Freeing unused kernel image memory: 1992K [ 1.760612] Freeing unused kernel image memory: 1444K [ 1.760812] Run /init as init process [ 1.771799] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.900991] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.901290] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.902289] hub 1-3:1.0: USB hub found [ 1.902603] hub 1-3:1.0: 4 ports detected [ 1.979195] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.979629] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.979793] xen: registering gsi 48 triggering 0 polarity 0 [ 1.979837] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.980556] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.980980] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.981127] xen: registering gsi 49 triggering 0 polarity 0 [ 1.981142] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.981817] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.983577] mpt3sas version 26.100.00.00 loaded [ 1.984039] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.984891] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.985048] xen: registering gsi 24 triggering 0 polarity 0 [ 1.985091] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.985130] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 2.007094] random: crng init done [ 2.036520] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.036888] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 2.037482] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 2.037641] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x00000000e659cee8), size(65536) [ 2.037908] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.096692] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.096983] mpt2sas_cm0: sending diag reset !! [ 2.341854] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c75c722b, max_idle_ns: 440795310849 ns [ 2.342329] clocksource: Switched to clocksource tsc [ 3.405952] mpt2sas_cm0: diag reset: SUCCESS [ 3.450419] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.450703] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.450958] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.499397] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.499759] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.499780] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.500321] mpt2sas_cm0: Protocol=( [ 3.500322] Initiator [ 3.500467] ,Target [ 3.500606] ), [ 3.500773] Capabilities=( [ 3.500952] Raid [ 3.501119] ,TLR [ 3.501258] ,EEDP [ 3.501397] ,Snapshot Buffer [ 3.501538] ,Diag Trace Buffer [ 3.501687] ,Task Set Full [ 3.501833] ,NCQ [ 3.501976] ) [ 3.502520] scsi host4: Fusion MPT SAS Host [ 3.518969] mpt2sas_cm0: sending port enable !! [ 5.080063] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 11.210714] mpt2sas_cm0: port enable: SUCCESS [ 11.212741] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.212990] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 11.213236] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 11.213508] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.214874] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.216127] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.291005] sd 4:0:0:0: [sda] Write Protect is off [ 11.291184] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.291727] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.366177] sda: sda1 sda2 < sda5 > [ 11.442068] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.288486] PM: Image not found (code -22) [ 12.674161] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.992459] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.487681] systemd-udevd[1522]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.805624] systemd-udevd[1550]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.805627] systemd-udevd[1536]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.816486] systemd-udevd[1536]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.816530] systemd-udevd[1550]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.833441] systemd-udevd[1536]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.833541] systemd-udevd[1547]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.839466] systemd-udevd[1536]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.840441] systemd-udevd[1547]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.939894] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.289531] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.352987] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.438622] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 18.132102] systemd-udevd[1548]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 18.137541] xenbr0: port 1(eth0) entered blocking state [ 18.137729] xenbr0: port 1(eth0) entered disabled state [ 18.137951] device eth0 entered promiscuous mode [ 18.225992] bnx2 0000:02:00.0 eth0: using MSIX [ 18.234819] xenbr0: port 1(eth0) entered blocking state [ 18.235002] xenbr0: port 1(eth0) entered forwarding state [ 18.235208] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready