[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031143] tsc: Fast TSC calibration using PIT [ 0.031149] tsc: Detected 2800.070 MHz processor [ 0.031151] tsc: Detected 2800.074 MHz TSC [ 0.052998] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053002] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053009] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.053011] Disabled [ 0.053014] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053022] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053113] Scanning 1 areas for low memory corruption [ 0.055025] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.127492] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.129677] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.129712] ACPI: Early table checksum verification disabled [ 0.144431] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.144443] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144502] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.144619] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.144632] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.144641] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.144652] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.144664] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144675] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144686] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144698] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144709] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144721] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144732] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144744] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144755] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144766] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144779] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.144791] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.144803] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.144814] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144825] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.144863] ACPI: Local APIC address 0xfee00000 [ 0.144866] Setting APIC routing to Xen PV. [ 0.145914] Zone ranges: [ 0.145919] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.145922] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.145924] Normal empty [ 0.145926] Movable zone start for each node [ 0.145927] Early memory node ranges [ 0.145929] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.145930] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.145933] Reserved but unavailable: 1 pages [ 0.145936] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.145941] On node 0 totalpages: 131071 [ 0.145944] DMA zone: 64 pages used for memmap [ 0.145944] DMA zone: 21 pages reserved [ 0.145946] DMA zone: 3997 pages, LIFO batch:0 [ 0.146133] DMA32 zone: 1986 pages used for memmap [ 0.146134] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.152700] p2m virtual area at (____ptrval____), size is 40000000 [ 0.348705] Remapped 98 page(s) [ 0.349157] ACPI: PM-Timer IO Port: 0x808 [ 0.349165] ACPI: Local APIC address 0xfee00000 [ 0.349355] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.349412] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.349421] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.349459] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.349468] ACPI: IRQ0 used by override. [ 0.349469] ACPI: IRQ9 used by override. [ 0.349503] Using ACPI (MADT) for SMP configuration information [ 0.349508] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.349515] ACPI: SPCR: SPCR table version 1 [ 0.349521] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.349531] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.349560] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.349562] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.349564] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.349568] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.349574] Booting paravirtualized kernel on Xen [ 0.349575] Xen version: 4.15.2-pre (preserve-AD) [ 0.349583] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.508078] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.508105] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.509450] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.509463] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.509465] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.509609] xen: PV spinlocks enabled [ 0.509617] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.509627] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.509632] Kernel command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.510058] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.510209] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.610548] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.616508] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.616690] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.618200] rcu: Hierarchical RCU implementation. [ 0.618202] rcu: RCU event tracing is enabled. [ 0.618204] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.618207] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.619237] Using NULL legacy PIC [ 0.619240] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.619325] xen:events: Using FIFO-based ABI [ 0.619375] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.619381] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.619388] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.619394] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.619399] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.619405] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.619410] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.619415] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.619421] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.619430] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.619435] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.619441] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.619446] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.619452] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.619458] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.625585] Console: colour VGA+ 80x25 [ 0.641543] console [tty0] enabled [ 0.642043] console [hvc0] enabled [ 0.642205] ACPI: Core revision 20180810 [ 0.649189] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.649447] Xen: using vcpuop timer interface [ 0.649456] installing Xen timer for CPU 0 [ 0.649721] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c867b59e, max_idle_ns: 440795284041 ns [ 0.650055] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.14 BogoMIPS (lpj=2800074) [ 0.650340] pid_max: default: 32768 minimum: 301 [ 0.650546] Security Framework initialized [ 0.651028] SELinux: Initializing. [ 0.651233] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.651397] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.652050] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.652204] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.652363] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.652611] Spectre V2 : Mitigation: Full AMD retpoline [ 0.652790] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.653349] Freeing SMP alternatives memory: 36K [ 0.656226] cpu 0 spinlock event irq 57 [ 0.656389] VPMU disabled by hypervisor. [ 0.656763] Performance Events: PMU not available due to virtualization, using software events only. [ 0.657118] rcu: Hierarchical SRCU implementation. [ 0.657634] smp: Bringing up secondary CPUs ... [ 0.657973] installing Xen timer for CPU 1 [ 0.658506] cpu 1 spinlock event irq 69 [ 0.659076] installing Xen timer for CPU 2 [ 0.659627] cpu 2 spinlock event irq 76 [ 0.660199] installing Xen timer for CPU 3 [ 0.660681] cpu 3 spinlock event irq 83 [ 0.661199] installing Xen timer for CPU 4 [ 0.661673] cpu 4 spinlock event irq 90 [ 0.662195] installing Xen timer for CPU 5 [ 0.662675] cpu 5 spinlock event irq 97 [ 0.663197] installing Xen timer for CPU 6 [ 0.663626] cpu 6 spinlock event irq 104 [ 0.664202] installing Xen timer for CPU 7 [ 0.664652] cpu 7 spinlock event irq 111 [ 0.664652] smp: Brought up 1 node, 8 CPUs [ 0.665018] smpboot: Max logical packages: 1 [ 0.665452] devtmpfs: initialized [ 0.666123] x86/mm: Memory block size: 128MB [ 0.667214] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.667478] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.667916] RTC time: 16:27:44, date: 11/22/21 [ 0.668294] NET: Registered protocol family 16 [ 0.668479] xen:grant_table: Grant tables using version 1 layout [ 0.668736] Grant table initialized [ 0.669269] audit: initializing netlink subsys (disabled) [ 0.669470] audit: type=2000 audit(1637598465.310:1): state=initialized audit_enabled=0 res=1 [ 0.670229] node 0 link 1: io port [e000, ffff] [ 0.670242] TOM: 00000000c0000000 aka 3072M [ 0.670407] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.670414] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.670424] node 0 link 1: mmio [fec80000, fecbffff] [ 0.670429] TOM2: 0000000840000000 aka 33792M [ 0.670429] bus: [bus 00-3f] on node 0 link 1 [ 0.670429] bus: 00 [io 0x0000-0xffff] [ 0.670429] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.670429] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.670429] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.671193] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.671193] ACPI: bus type PCI registered [ 0.672243] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.672243] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.685060] PCI: Using configuration type 1 for base access [ 0.692407] ACPI: Added _OSI(Module Device) [ 0.692429] ACPI: Added _OSI(Processor Device) [ 0.693020] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.693020] ACPI: Added _OSI(Processor Aggregator Device) [ 0.693020] ACPI: Added _OSI(Linux-Dell-Video) [ 0.693170] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.697223] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.697730] xen: registering gsi 9 triggering 0 polarity 1 [ 0.698162] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.698030] random: fast init done [ 0.702313] ACPI: Interpreter enabled [ 0.702517] ACPI: (supports S0 S4 S5) [ 0.704039] ACPI: Using IOAPIC for interrupt routing [ 0.704267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.704781] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.722165] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.722351] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.723327] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.723571] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.725915] PCI host bridge to bus 0000:00 [ 0.726015] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.726172] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.726337] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.726552] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.726710] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.726868] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.727014] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.727254] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.727495] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.727783] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.728014] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.728257] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.728444] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.728769] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.729141] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.729141] pci 0000:00:02.0: enabling Extended Tags [ 0.729363] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.729516] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.729586] pci 0000:00:09.0: enabling Extended Tags [ 0.729812] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.729956] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.730002] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.730025] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.730072] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.730091] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.730110] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.730129] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.730178] pci 0000:00:11.0: set SATA to AHCI mode [ 0.730495] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.730538] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.730745] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.730782] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.731052] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.731052] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.731213] pci 0000:00:12.2: supports D1 D2 [ 0.731215] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.731336] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.731373] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.731584] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.731621] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.731876] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.731920] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.732089] pci 0000:00:13.2: supports D1 D2 [ 0.732091] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.732217] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.732529] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.732571] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.732591] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.732609] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.732628] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.732646] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.732834] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.733091] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.733293] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.733485] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.733643] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.733807] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.734052] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.734140] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.734334] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.734482] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.734635] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.734810] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.735070] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.735105] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.735130] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.735156] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.735186] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.735198] pci 0000:01:00.0: enabling Extended Tags [ 0.735467] pci 0000:01:00.0: supports D1 D2 [ 0.735590] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.735775] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.735781] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.735900] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.735955] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.736208] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.736269] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.736638] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.736686] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.736909] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.737069] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.737229] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.737260] pci_bus 0000:03: extended config space not accessible [ 0.737520] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.737561] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.737583] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.737605] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.737886] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.738025] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.738031] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.738033] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.738035] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.738036] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.738037] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.738038] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.738040] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.738041] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.738042] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.738043] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.738044] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.738046] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.738089] pci_bus 0000:00: on NUMA node 0 [ 0.738229] xen: registering gsi 13 triggering 1 polarity 0 [ 0.740274] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.740520] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.740763] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.741034] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.741278] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.741535] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.741779] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.742022] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.742291] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.742545] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.742788] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.743038] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.743280] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.743531] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.743769] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.744023] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.744274] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.744512] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.744752] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.744987] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.745101] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.745343] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.745614] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.745848] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.746101] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.746344] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.746588] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.746817] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.747066] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.747303] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.747541] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.747781] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.748198] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.748482] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.748758] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.749038] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.749341] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.749617] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.749892] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.750136] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.750665] xen:balloon: Initialising balloon driver [ 0.751133] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.751292] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.751575] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.751737] vgaarb: loaded [ 0.752105] SCSI subsystem initialized [ 0.752336] libata version 3.00 loaded. [ 0.752336] ACPI: bus type USB registered [ 0.752336] usbcore: registered new interface driver usbfs [ 0.753012] usbcore: registered new interface driver hub [ 0.753128] usbcore: registered new device driver usb [ 0.753320] pps_core: LinuxPPS API ver. 1 registered [ 0.753479] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.753747] PTP clock support registered [ 0.754117] EDAC MC: Ver: 3.0.0 [ 0.754553] Advanced Linux Sound Architecture Driver Initialized. [ 0.755052] PCI: Using ACPI for IRQ routing [ 0.759104] PCI: pci_cache_line_size set to 64 bytes [ 0.759278] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.759441] Expanded resource Reserved due to conflict with Reserved [ 0.759602] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.759605] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.760025] NetLabel: Initializing [ 0.760025] NetLabel: domain hash size = 128 [ 0.760025] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.760187] NetLabel: unlabeled traffic allowed by default [ 0.761321] clocksource: Switched to clocksource tsc-early [ 0.776589] VFS: Disk quotas dquot_6.6.0 [ 0.776817] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.777041] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.777351] pnp: PnP ACPI init [ 0.777828] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.777868] xen: registering gsi 8 triggering 1 polarity 0 [ 0.777925] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.778332] xen: registering gsi 4 triggering 1 polarity 0 [ 0.778335] Already setup the GSI :4 [ 0.778595] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.778977] xen: registering gsi 3 triggering 1 polarity 0 [ 0.779084] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.780549] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.780708] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.780862] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.781030] system 00:04: [io 0x0dff] has been reserved [ 0.781182] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.781362] system 00:04: [io 0x0eff] has been reserved [ 0.781520] system 00:04: [io 0x040b] has been reserved [ 0.781679] system 00:04: [io 0x04d6] has been reserved [ 0.781832] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.782031] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.782186] system 00:04: [io 0x0c14] has been reserved [ 0.782338] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.782499] system 00:04: [io 0x0c6c] has been reserved [ 0.782682] system 00:04: [io 0x0c6f] has been reserved [ 0.782836] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.782991] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.783161] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.783330] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.783496] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.783652] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.783834] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.783990] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.784161] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.784318] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.784474] system 00:04: [io 0x0950] has been reserved [ 0.784648] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.784728] pnp 00:05: [irq 0 disabled] [ 0.784775] system 00:05: [io 0x0ca8] has been reserved [ 0.784929] system 00:05: [io 0x0cac] has been reserved [ 0.785130] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.786473] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.786650] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.786915] pnp: PnP ACPI: found 7 devices [ 0.800370] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.800631] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.800786] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.800974] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.801155] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.801316] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.801507] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.801664] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.801828] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.802115] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.802116] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.802117] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.802118] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.802120] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.802121] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.802122] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.802123] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.802125] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.802126] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.802127] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.802128] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.802130] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.802131] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.802132] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.802134] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.802135] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.802136] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.802137] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.802138] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.802140] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.802141] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.802142] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.802143] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.802144] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.802146] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.802147] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.802271] NET: Registered protocol family 2 [ 0.802715] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.802960] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.803160] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.803381] TCP: Hash tables configured (established 4096 bind 4096) [ 0.803604] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.803763] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.803993] NET: Registered protocol family 1 [ 0.805156] RPC: Registered named UNIX socket transport module. [ 0.805320] RPC: Registered udp transport module. [ 0.805475] RPC: Registered tcp transport module. [ 0.805653] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.806544] xen: registering gsi 16 triggering 0 polarity 1 [ 0.806626] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.937311] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 127874 usecs [ 0.937677] xen: registering gsi 16 triggering 0 polarity 1 [ 0.937694] Already setup the GSI :16 [ 0.938079] xen: registering gsi 17 triggering 0 polarity 1 [ 0.938128] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.938288] xen: registering gsi 18 triggering 0 polarity 1 [ 0.938301] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.938445] xen: registering gsi 18 triggering 0 polarity 1 [ 0.938447] Already setup the GSI :18 [ 0.938741] xen: registering gsi 19 triggering 0 polarity 1 [ 0.938766] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.938953] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.939253] PCI: CLS 64 bytes, default 64 [ 0.939397] Unpacking initramfs... [ 1.390894] Freeing initrd memory: 27456K [ 1.391317] kvm: no hardware support [ 1.391503] has_svm: svm not available [ 1.391650] kvm: no hardware support [ 1.394781] Scanning for low memory corruption every 60 seconds [ 1.396287] Initialise system trusted keyrings [ 1.396592] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.399612] NFS: Registering the id_resolver key type [ 1.399793] Key type id_resolver registered [ 1.399944] Key type id_legacy registered [ 1.408037] Key type asymmetric registered [ 1.408220] Asymmetric key parser 'x509' registered [ 1.408439] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.408688] io scheduler noop registered [ 1.408836] io scheduler deadline registered [ 1.409103] io scheduler cfq registered (default) [ 1.409294] io scheduler mq-deadline registered [ 1.409446] io scheduler kyber registered [ 1.410632] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.410791] xen: registering gsi 52 triggering 0 polarity 0 [ 1.410849] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.411238] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.411393] xen: registering gsi 53 triggering 0 polarity 0 [ 1.411407] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.411720] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.411932] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.412373] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.412679] ACPI: Power Button [PWRF] [ 1.413642] Warning: Processor Platform Limit not supported. [ 1.414206] xen:xen_evtchn: Event-channel device installed [ 1.414512] xen_pciback: backend is vpci [ 1.415613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.437044] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.438554] hpet_acpi_add: no address or irqs in _CRS [ 1.438868] Non-volatile memory driver v1.3 [ 1.439106] AMD IOMMUv2 driver by Joerg Roedel [ 1.439262] AMD IOMMUv2 functionality not available on this system [ 1.444675] loop: module loaded [ 1.452040] ahci 0000:00:11.0: version 3.0 [ 1.452223] xen: registering gsi 22 triggering 0 polarity 1 [ 1.452282] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.452488] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.452773] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.453962] scsi host0: ahci [ 1.454643] scsi host1: ahci [ 1.455169] scsi host2: ahci [ 1.455705] scsi host3: ahci [ 1.456148] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.456393] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.456647] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.456913] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.457419] tun: Universal TUN/TAP device driver, 1.6 [ 1.457725] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.457902] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.458117] sky2: driver version 1.30 [ 1.458354] xen_netfront: Initialising Xen virtual ethernet driver [ 1.458787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.458953] ehci-pci: EHCI PCI platform driver [ 1.459275] xen: registering gsi 17 triggering 0 polarity 1 [ 1.459288] Already setup the GSI :17 [ 1.459523] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.459812] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.460065] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.460325] ehci-pci 0000:00:12.2: debug port 1 [ 1.460669] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.467100] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.467366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.467642] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.467907] usb usb1: Product: EHCI Host Controller [ 1.468068] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.468225] usb usb1: SerialNumber: 0000:00:12.2 [ 1.468716] hub 1-0:1.0: USB hub found [ 1.468874] hub 1-0:1.0: 6 ports detected [ 1.469410] xen: registering gsi 19 triggering 0 polarity 1 [ 1.469421] Already setup the GSI :19 [ 1.469634] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.469939] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.470194] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.470510] ehci-pci 0000:00:13.2: debug port 1 [ 1.470824] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.477108] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.477413] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.477683] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.477919] usb usb2: Product: EHCI Host Controller [ 1.478080] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.478231] usb usb2: SerialNumber: 0000:00:13.2 [ 1.478746] hub 2-0:1.0: USB hub found [ 1.478932] hub 2-0:1.0: 6 ports detected [ 1.479321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.479499] ohci-pci: OHCI PCI platform driver [ 1.479852] xen: registering gsi 16 triggering 0 polarity 1 [ 1.479863] Already setup the GSI :16 [ 1.480139] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.480407] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.480782] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.536229] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.536509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.536748] usb usb3: Product: OHCI PCI host controller [ 1.536936] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.537099] usb usb3: SerialNumber: 0000:00:12.0 [ 1.537616] hub 3-0:1.0: USB hub found [ 1.537773] hub 3-0:1.0: 3 ports detected [ 1.538213] xen: registering gsi 16 triggering 0 polarity 1 [ 1.538223] Already setup the GSI :16 [ 1.538433] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.538737] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.539071] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.595221] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.595502] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.595742] usb usb4: Product: OHCI PCI host controller [ 1.595892] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.596059] usb usb4: SerialNumber: 0000:00:12.1 [ 1.596677] hub 4-0:1.0: USB hub found [ 1.596835] hub 4-0:1.0: 3 ports detected [ 1.597350] xen: registering gsi 18 triggering 0 polarity 1 [ 1.597361] Already setup the GSI :18 [ 1.597578] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.597933] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.598326] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.654221] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.654499] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.654794] usb usb5: Product: OHCI PCI host controller [ 1.654944] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.655106] usb usb5: SerialNumber: 0000:00:13.0 [ 1.655619] hub 5-0:1.0: USB hub found [ 1.655781] hub 5-0:1.0: 3 ports detected [ 1.656258] xen: registering gsi 18 triggering 0 polarity 1 [ 1.656266] Already setup the GSI :18 [ 1.656473] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.656821] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.657129] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.713226] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.713527] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.713765] usb usb6: Product: OHCI PCI host controller [ 1.713916] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.714086] usb usb6: SerialNumber: 0000:00:13.1 [ 1.714587] hub 6-0:1.0: USB hub found [ 1.714746] hub 6-0:1.0: 3 ports detected [ 1.715130] uhci_hcd: USB Universal Host Controller Interface driver [ 1.715360] usbcore: registered new interface driver usblp [ 1.715553] usbcore: registered new interface driver usb-storage [ 1.715764] i8042: PNP: No PS/2 controller found. [ 1.715943] i8042: Probing ports directly. [ 1.719169] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.719384] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.719948] rtc_cmos 00:01: RTC can wake from S4 [ 1.720390] rtc_cmos 00:01: registered as rtc0 [ 1.720574] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.720983] device-mapper: uevent: version 1.0.3 [ 1.721304] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.721623] hidraw: raw HID events driver (C) Jiri Kosina [ 1.722063] usbcore: registered new interface driver usbhid [ 1.722214] usbhid: USB HID core driver [ 1.724428] Initializing XFRM netlink socket [ 1.724821] NET: Registered protocol family 10 [ 1.725188] ata4: SATA link down (SStatus 0 SControl 300) [ 1.725592] Segment Routing with IPv6 [ 1.726168] ata2: SATA link down (SStatus 0 SControl 300) [ 1.726393] ata3: SATA link down (SStatus 0 SControl 300) [ 1.726606] ata1: SATA link down (SStatus 0 SControl 300) [ 1.726616] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.727213] NET: Registered protocol family 17 [ 1.727382] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.727682] Key type dns_resolver registered [ 1.729070] mce: Using 2 MCE banks [ 1.729291] sched_clock: Marking stable (1698483039, 30537396)->(1734544948, -5524513) [ 1.730840] registered taskstats version 1 [ 1.731060] Loading compiled-in X.509 certificates [ 1.731736] Magic number: 13:308:490 [ 1.732092] acpi PNP0F13:00: hash matches [ 1.732301] console [netcon0] enabled [ 1.732471] netconsole: network logging started [ 1.734260] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.747099] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.747385] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.747683] cfg80211: failed to load regulatory.db [ 1.747878] ALSA device list: [ 1.748038] No soundcards found. [ 1.749825] Freeing unused kernel image memory: 1344K [ 1.758116] Write protecting the kernel read-only data: 18432k [ 1.767491] Freeing unused kernel image memory: 1992K [ 1.769093] Freeing unused kernel image memory: 1444K [ 1.769257] Run /init as init process [ 1.777102] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.906554] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.906834] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.908004] hub 1-3:1.0: USB hub found [ 1.909140] hub 1-3:1.0: 4 ports detected [ 1.976843] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.977309] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.977461] xen: registering gsi 48 triggering 0 polarity 0 [ 1.977495] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.978265] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a7:02 [ 1.978689] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.978837] xen: registering gsi 49 triggering 0 polarity 0 [ 1.978854] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.979497] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a7:03 [ 1.981717] mpt3sas version 26.100.00.00 loaded [ 1.982165] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.982803] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.982960] xen: registering gsi 24 triggering 0 polarity 0 [ 1.983035] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.983071] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 2.038801] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.039131] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 2.039650] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 2.039806] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x(____ptrval____)), size(65536) [ 2.040060] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.048709] random: crng init done [ 2.080372] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.080651] mpt2sas_cm0: sending diag reset !! [ 2.345133] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c867b59e, max_idle_ns: 440795284041 ns [ 2.345625] clocksource: Switched to clocksource tsc [ 3.380774] mpt2sas_cm0: diag reset: SUCCESS [ 3.421124] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.421356] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.421599] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.469389] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.469739] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.469761] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.470318] mpt2sas_cm0: Protocol=( [ 3.470319] Initiator [ 3.470463] ,Target [ 3.470602] ), [ 3.470740] Capabilities=( [ 3.470882] Raid [ 3.471052] ,TLR [ 3.471216] ,EEDP [ 3.471354] ,Snapshot Buffer [ 3.471491] ,Diag Trace Buffer [ 3.471630] ,Task Set Full [ 3.471773] ,NCQ [ 3.471912] ) [ 3.472430] scsi host4: Fusion MPT SAS Host [ 3.486372] mpt2sas_cm0: sending port enable !! [ 5.059364] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5600), phys(8) [ 11.190082] mpt2sas_cm0: port enable: SUCCESS [ 11.191961] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.192216] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002536ebe0) [ 11.192484] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5600), slot(0) [ 11.192765] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.194085] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.195351] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.285278] sd 4:0:0:0: [sda] Write Protect is off [ 11.285452] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.286055] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.356534] sda: sda1 sda2 < sda5 > [ 11.429511] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.203179] PM: Image not found (code -22) [ 12.596711] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.890810] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.387976] systemd-udevd[1522]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.691186] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.691245] systemd-udevd[1535]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.697800] systemd-udevd[1539]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.697902] systemd-udevd[1535]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.722381] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.722447] systemd-udevd[1535]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.728747] systemd-udevd[1539]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.729486] systemd-udevd[1535]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.771849] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.062250] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.122946] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.203278] Adding 1949692k swap on /dev/mapper/nocera0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.879088] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.884285] xenbr0: port 1(eth0) entered blocking state [ 17.884485] xenbr0: port 1(eth0) entered disabled state [ 17.884696] device eth0 entered promiscuous mode [ 17.987356] bnx2 0000:02:00.0 eth0: using MSIX [ 17.995936] xenbr0: port 1(eth0) entered blocking state [ 17.996156] xenbr0: port 1(eth0) entered forwarding state [ 17.996337] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready