[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.030928] tsc: Fast TSC calibration using PIT [ 0.030931] tsc: Detected 2800.116 MHz processor [ 0.030934] tsc: Detected 2800.042 MHz TSC [ 0.053429] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053435] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053442] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.053445] Disabled [ 0.053447] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053456] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053554] Scanning 1 areas for low memory corruption [ 0.055489] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.129263] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.131437] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.131475] ACPI: Early table checksum verification disabled [ 0.146211] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.146224] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146281] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.146401] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.146414] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.146425] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.146434] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.146445] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146458] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146470] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146482] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146493] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146505] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146516] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146527] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146539] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146552] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146563] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.146573] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.146585] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.146596] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.146614] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.146652] ACPI: Local APIC address 0xfee00000 [ 0.146655] Setting APIC routing to Xen PV. [ 0.147707] Zone ranges: [ 0.147714] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.147716] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.147718] Normal empty [ 0.147720] Movable zone start for each node [ 0.147721] Early memory node ranges [ 0.147723] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.147724] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.147727] Reserved but unavailable: 1 pages [ 0.147730] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.147734] On node 0 totalpages: 131071 [ 0.147737] DMA zone: 64 pages used for memmap [ 0.147738] DMA zone: 21 pages reserved [ 0.147739] DMA zone: 3997 pages, LIFO batch:0 [ 0.147934] DMA32 zone: 1986 pages used for memmap [ 0.147935] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.154467] p2m virtual area at (____ptrval____), size is 40000000 [ 0.350480] Remapped 98 page(s) [ 0.350937] ACPI: PM-Timer IO Port: 0x808 [ 0.350944] ACPI: Local APIC address 0xfee00000 [ 0.351138] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.351198] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.351207] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.351244] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.351252] ACPI: IRQ0 used by override. [ 0.351254] ACPI: IRQ9 used by override. [ 0.351290] Using ACPI (MADT) for SMP configuration information [ 0.351296] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.351303] ACPI: SPCR: SPCR table version 1 [ 0.351307] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.351319] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.351350] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.351353] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.351354] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.351358] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.351363] Booting paravirtualized kernel on Xen [ 0.351365] Xen version: 4.16-rc (preserve-AD) [ 0.351373] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.509823] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.509851] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.511178] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.511191] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.511193] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.511345] xen: PV spinlocks enabled [ 0.511354] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.511363] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.511370] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.511808] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.511965] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.609298] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.615281] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.615466] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.616972] rcu: Hierarchical RCU implementation. [ 0.616974] rcu: RCU event tracing is enabled. [ 0.616977] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.616979] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.617985] Using NULL legacy PIC [ 0.617988] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.618080] xen:events: Using FIFO-based ABI [ 0.618130] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.618136] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.618144] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.618149] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.618155] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.618160] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.618166] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.618171] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.618176] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.618181] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.618190] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.618196] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.618201] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.618207] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.618212] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.624471] Console: colour VGA+ 80x25 [ 0.640260] console [tty0] enabled [ 0.640763] console [hvc0] enabled [ 0.640923] ACPI: Core revision 20180810 [ 0.648121] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.648396] Xen: using vcpuop timer interface [ 0.648407] installing Xen timer for CPU 0 [ 0.648660] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c68417a1, max_idle_ns: 440795206594 ns [ 0.649000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.08 BogoMIPS (lpj=2800042) [ 0.649255] pid_max: default: 32768 minimum: 301 [ 0.649455] Security Framework initialized [ 0.649969] SELinux: Initializing. [ 0.650179] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.650343] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.650998] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.651180] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.651340] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.651586] Spectre V2 : Mitigation: Full AMD retpoline [ 0.651737] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.652275] Freeing SMP alternatives memory: 36K [ 0.655171] cpu 0 spinlock event irq 57 [ 0.655331] VPMU disabled by hypervisor. [ 0.655717] Performance Events: PMU not available due to virtualization, using software events only. [ 0.656063] rcu: Hierarchical SRCU implementation. [ 0.656619] smp: Bringing up secondary CPUs ... [ 0.656967] installing Xen timer for CPU 1 [ 0.657508] cpu 1 spinlock event irq 69 [ 0.658004] installing Xen timer for CPU 2 [ 0.658572] cpu 2 spinlock event irq 76 [ 0.659146] installing Xen timer for CPU 3 [ 0.659617] cpu 3 spinlock event irq 83 [ 0.660137] installing Xen timer for CPU 4 [ 0.660666] cpu 4 spinlock event irq 90 [ 0.661139] installing Xen timer for CPU 5 [ 0.661609] cpu 5 spinlock event irq 97 [ 0.662141] installing Xen timer for CPU 6 [ 0.662590] cpu 6 spinlock event irq 104 [ 0.663182] installing Xen timer for CPU 7 [ 0.663589] cpu 7 spinlock event irq 111 [ 0.663966] smp: Brought up 1 node, 8 CPUs [ 0.664150] smpboot: Max logical packages: 1 [ 0.664964] devtmpfs: initialized [ 0.665245] x86/mm: Memory block size: 128MB [ 0.666204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.666486] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.667175] RTC time: 0:47:59, date: 11/23/21 [ 0.667600] NET: Registered protocol family 16 [ 0.667813] xen:grant_table: Grant tables using version 1 layout [ 0.668033] Grant table initialized [ 0.668597] audit: initializing netlink subsys (disabled) [ 0.668966] audit: type=2000 audit(1637628480.120:1): state=initialized audit_enabled=0 res=1 [ 0.669251] node 0 link 1: io port [e000, ffff] [ 0.669251] TOM: 00000000c0000000 aka 3072M [ 0.669254] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.669261] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.669271] node 0 link 1: mmio [fec80000, fecbffff] [ 0.669276] TOM2: 0000000840000000 aka 33792M [ 0.669426] bus: [bus 00-3f] on node 0 link 1 [ 0.669428] bus: 00 [io 0x0000-0xffff] [ 0.669430] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.669431] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.669431] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.670084] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.670341] ACPI: bus type PCI registered [ 0.671032] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.671349] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.684350] PCI: Using configuration type 1 for base access [ 0.691145] ACPI: Added _OSI(Module Device) [ 0.691981] ACPI: Added _OSI(Processor Device) [ 0.692128] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.692283] ACPI: Added _OSI(Processor Aggregator Device) [ 0.692442] ACPI: Added _OSI(Linux-Dell-Video) [ 0.692591] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.693970] random: fast init done [ 0.695542] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.696056] xen: registering gsi 9 triggering 0 polarity 1 [ 0.696489] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.700461] ACPI: Interpreter enabled [ 0.700660] ACPI: (supports S0 S4 S5) [ 0.703010] ACPI: Using IOAPIC for interrupt routing [ 0.703185] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.703698] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.721831] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.721966] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.722982] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.723247] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.725599] PCI host bridge to bus 0000:00 [ 0.725755] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.725912] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.725958] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.726147] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.726303] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.726462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.726722] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.726952] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.726957] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.727209] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.727458] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.727718] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.727904] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.728237] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.729087] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.729087] pci 0000:00:02.0: enabling Extended Tags [ 0.729087] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.729087] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.729087] pci 0000:00:09.0: enabling Extended Tags [ 0.729270] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.729957] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.729957] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.729957] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.729957] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.729957] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.729957] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.729957] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.729957] pci 0000:00:11.0: set SATA to AHCI mode [ 0.730010] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.730010] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.730167] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.730203] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.730975] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.730975] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.730975] pci 0000:00:12.2: supports D1 D2 [ 0.730975] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.730994] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.730994] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.730994] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.731007] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.731214] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.731284] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.731449] pci 0000:00:13.2: supports D1 D2 [ 0.731451] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.731967] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.731993] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.731993] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.731993] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.731993] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.731993] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.731993] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.732151] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.732956] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.733022] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.733022] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.733022] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.733107] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.733269] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.733955] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.733993] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.734010] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.734010] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.734108] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.734369] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.734401] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.734423] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.734445] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.734477] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.734490] pci 0000:01:00.0: enabling Extended Tags [ 0.734752] pci 0000:01:00.0: supports D1 D2 [ 0.734997] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.734997] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.734997] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.735079] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.735125] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.735338] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.735416] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.735956] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.735956] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.736063] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.736224] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.736384] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.736414] pci_bus 0000:03: extended config space not accessible [ 0.736955] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.736955] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.736955] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.736955] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.736998] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.737145] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.737152] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.737154] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.737156] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.737157] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.737158] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.737160] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.737161] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.737162] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.737164] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.737165] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.737166] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.737167] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.737233] pci_bus 0000:00: on NUMA node 0 [ 0.737376] xen: registering gsi 13 triggering 1 polarity 0 [ 0.739391] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.739699] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.739937] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.740048] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.740293] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.740534] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.740800] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.741041] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.741283] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.741538] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.741778] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.742044] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.742291] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.742533] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.742772] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.743027] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.743295] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.743551] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.743788] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.744039] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.744285] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.744537] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.744775] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.745038] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.745284] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.745533] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.745773] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.746017] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.746263] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.746510] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.746742] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.746991] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.747424] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.747707] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.747997] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.748275] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.748557] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.748836] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.749075] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.749375] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.750003] xen:balloon: Initialising balloon driver [ 0.750210] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.750210] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.750417] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.750571] vgaarb: loaded [ 0.751100] SCSI subsystem initialized [ 0.752006] libata version 3.00 loaded. [ 0.752048] ACPI: bus type USB registered [ 0.752272] usbcore: registered new interface driver usbfs [ 0.752437] usbcore: registered new interface driver hub [ 0.752437] usbcore: registered new device driver usb [ 0.752958] pps_core: LinuxPPS API ver. 1 registered [ 0.752958] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.753017] PTP clock support registered [ 0.753105] EDAC MC: Ver: 3.0.0 [ 0.754273] Advanced Linux Sound Architecture Driver Initialized. [ 0.754325] PCI: Using ACPI for IRQ routing [ 0.757953] PCI: pci_cache_line_size set to 64 bytes [ 0.757953] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.757953] Expanded resource Reserved due to conflict with Reserved [ 0.758958] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.758961] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.760025] NetLabel: Initializing [ 0.760025] NetLabel: domain hash size = 128 [ 0.760025] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.760025] NetLabel: unlabeled traffic allowed by default [ 0.761302] clocksource: Switched to clocksource tsc-early [ 0.777806] VFS: Disk quotas dquot_6.6.0 [ 0.778083] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.778297] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.778632] pnp: PnP ACPI init [ 0.779133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.779168] xen: registering gsi 8 triggering 1 polarity 0 [ 0.779211] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.779657] xen: registering gsi 4 triggering 1 polarity 0 [ 0.779660] Already setup the GSI :4 [ 0.779913] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.780285] xen: registering gsi 3 triggering 1 polarity 0 [ 0.780395] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.781932] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.782127] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.782291] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.782462] system 00:04: [io 0x0dff] has been reserved [ 0.782618] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.782778] system 00:04: [io 0x0eff] has been reserved [ 0.782929] system 00:04: [io 0x040b] has been reserved [ 0.783086] system 00:04: [io 0x04d6] has been reserved [ 0.783261] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.783413] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.783596] system 00:04: [io 0x0c14] has been reserved [ 0.783747] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.783899] system 00:04: [io 0x0c6c] has been reserved [ 0.784057] system 00:04: [io 0x0c6f] has been reserved [ 0.784209] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.784365] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.784546] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.784700] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.784853] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.785034] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.785188] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.785343] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.785507] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.785688] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.785841] system 00:04: [io 0x0950] has been reserved [ 0.786013] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.786084] pnp 00:05: [irq 0 disabled] [ 0.786130] system 00:05: [io 0x0ca8] has been reserved [ 0.786286] system 00:05: [io 0x0cac] has been reserved [ 0.786468] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.787918] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.788138] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.788413] pnp: PnP ACPI: found 7 devices [ 0.802568] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.802859] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.803050] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.803211] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.803382] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.803547] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.803717] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.803876] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.804071] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.804344] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.804346] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.804347] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.804348] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.804350] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.804351] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.804352] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.804354] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.804355] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.804356] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.804357] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.804359] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.804360] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.804362] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.804364] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.804365] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.804367] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.804368] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.804369] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.804371] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.804372] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.804373] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.804374] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.804376] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.804377] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.804378] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.804379] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.804525] NET: Registered protocol family 2 [ 0.804977] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.805245] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.805428] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.805623] TCP: Hash tables configured (established 4096 bind 4096) [ 0.805882] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.806062] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.806298] NET: Registered protocol family 1 [ 0.807258] RPC: Registered named UNIX socket transport module. [ 0.807435] RPC: Registered udp transport module. [ 0.807589] RPC: Registered tcp transport module. [ 0.807766] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.808515] xen: registering gsi 16 triggering 0 polarity 1 [ 0.808590] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.937266] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 125884 usecs [ 0.937636] xen: registering gsi 16 triggering 0 polarity 1 [ 0.937648] Already setup the GSI :16 [ 0.937972] xen: registering gsi 17 triggering 0 polarity 1 [ 0.938023] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.938184] xen: registering gsi 18 triggering 0 polarity 1 [ 0.938196] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.938336] xen: registering gsi 18 triggering 0 polarity 1 [ 0.938338] Already setup the GSI :18 [ 0.938644] xen: registering gsi 19 triggering 0 polarity 1 [ 0.938669] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.938843] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.939096] PCI: CLS 64 bytes, default 64 [ 0.939213] Unpacking initramfs... [ 1.375017] Freeing initrd memory: 27456K [ 1.375394] kvm: no hardware support [ 1.375585] has_svm: svm not available [ 1.375766] kvm: no hardware support [ 1.378637] Scanning for low memory corruption every 60 seconds [ 1.380061] Initialise system trusted keyrings [ 1.380317] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.383128] NFS: Registering the id_resolver key type [ 1.383293] Key type id_resolver registered [ 1.383439] Key type id_legacy registered [ 1.390903] Key type asymmetric registered [ 1.391128] Asymmetric key parser 'x509' registered [ 1.391329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.391596] io scheduler noop registered [ 1.391740] io scheduler deadline registered [ 1.391986] io scheduler cfq registered (default) [ 1.392133] io scheduler mq-deadline registered [ 1.392310] io scheduler kyber registered [ 1.393319] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.393481] xen: registering gsi 52 triggering 0 polarity 0 [ 1.393551] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.393908] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.394097] xen: registering gsi 53 triggering 0 polarity 0 [ 1.394112] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.394364] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.394569] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.394972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.395272] ACPI: Power Button [PWRF] [ 1.396239] Warning: Processor Platform Limit not supported. [ 1.396854] xen:xen_evtchn: Event-channel device installed [ 1.397190] xen_pciback: backend is vpci [ 1.398377] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.419777] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.421260] hpet_acpi_add: no address or irqs in _CRS [ 1.421544] Non-volatile memory driver v1.3 [ 1.421750] AMD IOMMUv2 driver by Joerg Roedel [ 1.421903] AMD IOMMUv2 functionality not available on this system [ 1.427141] loop: module loaded [ 1.434010] ahci 0000:00:11.0: version 3.0 [ 1.434154] xen: registering gsi 22 triggering 0 polarity 1 [ 1.434195] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.434375] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.434630] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.435814] scsi host0: ahci [ 1.436467] scsi host1: ahci [ 1.437193] scsi host2: ahci [ 1.437694] scsi host3: ahci [ 1.438087] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.438327] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.438571] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.438814] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.439330] tun: Universal TUN/TAP device driver, 1.6 [ 1.439682] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.439836] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.440019] sky2: driver version 1.30 [ 1.440241] xen_netfront: Initialising Xen virtual ethernet driver [ 1.440639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.440827] ehci-pci: EHCI PCI platform driver [ 1.441150] xen: registering gsi 17 triggering 0 polarity 1 [ 1.441162] Already setup the GSI :17 [ 1.441379] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.441680] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.441925] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.442248] ehci-pci 0000:00:12.2: debug port 1 [ 1.442558] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.449033] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.449306] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.449550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.449782] usb usb1: Product: EHCI Host Controller [ 1.449930] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.450099] usb usb1: SerialNumber: 0000:00:12.2 [ 1.450616] hub 1-0:1.0: USB hub found [ 1.450782] hub 1-0:1.0: 6 ports detected [ 1.451280] xen: registering gsi 19 triggering 0 polarity 1 [ 1.451291] Already setup the GSI :19 [ 1.451548] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.451878] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.452136] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.452397] ehci-pci 0000:00:13.2: debug port 1 [ 1.452730] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.459077] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.459360] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.459606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.459841] usb usb2: Product: EHCI Host Controller [ 1.460023] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.460201] usb usb2: SerialNumber: 0000:00:13.2 [ 1.460703] hub 2-0:1.0: USB hub found [ 1.460861] hub 2-0:1.0: 6 ports detected [ 1.461255] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.461435] ohci-pci: OHCI PCI platform driver [ 1.461823] xen: registering gsi 16 triggering 0 polarity 1 [ 1.461834] Already setup the GSI :16 [ 1.462045] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.462326] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.462716] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.519176] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.519450] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.519687] usb usb3: Product: OHCI PCI host controller [ 1.519888] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.520052] usb usb3: SerialNumber: 0000:00:12.0 [ 1.520576] hub 3-0:1.0: USB hub found [ 1.520736] hub 3-0:1.0: 3 ports detected [ 1.521221] xen: registering gsi 16 triggering 0 polarity 1 [ 1.521233] Already setup the GSI :16 [ 1.521498] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.521816] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.522148] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.578150] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.578428] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.578697] usb usb4: Product: OHCI PCI host controller [ 1.578845] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.579003] usb usb4: SerialNumber: 0000:00:12.1 [ 1.579528] hub 4-0:1.0: USB hub found [ 1.579687] hub 4-0:1.0: 3 ports detected [ 1.580215] xen: registering gsi 18 triggering 0 polarity 1 [ 1.580227] Already setup the GSI :18 [ 1.580452] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.580760] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.581183] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.638155] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.638456] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.638693] usb usb5: Product: OHCI PCI host controller [ 1.638840] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.639004] usb usb5: SerialNumber: 0000:00:13.0 [ 1.639596] hub 5-0:1.0: USB hub found [ 1.639749] hub 5-0:1.0: 3 ports detected [ 1.640197] xen: registering gsi 18 triggering 0 polarity 1 [ 1.640205] Already setup the GSI :18 [ 1.640409] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.640742] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.641064] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.698146] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.698443] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.698691] usb usb6: Product: OHCI PCI host controller [ 1.698843] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.698998] usb usb6: SerialNumber: 0000:00:13.1 [ 1.699496] hub 6-0:1.0: USB hub found [ 1.699660] hub 6-0:1.0: 3 ports detected [ 1.700044] uhci_hcd: USB Universal Host Controller Interface driver [ 1.700268] usbcore: registered new interface driver usblp [ 1.700485] usbcore: registered new interface driver usb-storage [ 1.700711] i8042: PNP: No PS/2 controller found. [ 1.700860] i8042: Probing ports directly. [ 1.703974] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.704174] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.704800] rtc_cmos 00:01: RTC can wake from S4 [ 1.705236] rtc_cmos 00:01: registered as rtc0 [ 1.705429] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.705806] device-mapper: uevent: version 1.0.3 [ 1.706118] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.706400] hidraw: raw HID events driver (C) Jiri Kosina [ 1.706823] usbcore: registered new interface driver usbhid [ 1.706987] usbhid: USB HID core driver [ 1.708437] Initializing XFRM netlink socket [ 1.708829] NET: Registered protocol family 10 [ 1.709409] Segment Routing with IPv6 [ 1.710200] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.710567] NET: Registered protocol family 17 [ 1.710736] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.711037] Key type dns_resolver registered [ 1.712400] mce: Using 2 MCE banks [ 1.712598] sched_clock: Marking stable (1681569576, 30726188)->(1716758816, -4463052) [ 1.713940] registered taskstats version 1 [ 1.714122] Loading compiled-in X.509 certificates [ 1.714815] Magic number: 13:990:759 [ 1.715208] console [netcon0] enabled [ 1.715409] netconsole: network logging started [ 1.715672] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.722989] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.724206] ata2: SATA link down (SStatus 0 SControl 300) [ 1.725128] ata4: SATA link down (SStatus 0 SControl 300) [ 1.726840] ata1: SATA link down (SStatus 0 SControl 300) [ 1.727091] ata3: SATA link down (SStatus 0 SControl 300) [ 1.727336] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.727556] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.727827] cfg80211: failed to load regulatory.db [ 1.728024] ALSA device list: [ 1.728164] No soundcards found. [ 1.729884] Freeing unused kernel image memory: 1344K [ 1.742008] Write protecting the kernel read-only data: 18432k [ 1.751675] Freeing unused kernel image memory: 1992K [ 1.753303] Freeing unused kernel image memory: 1444K [ 1.753466] Run /init as init process [ 1.852330] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.852628] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.853611] hub 1-3:1.0: USB hub found [ 1.853812] hub 1-3:1.0: 4 ports detected [ 1.967050] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.967527] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.967685] xen: registering gsi 48 triggering 0 polarity 0 [ 1.967741] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.968493] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.968924] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.969115] xen: registering gsi 49 triggering 0 polarity 0 [ 1.969133] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.969787] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.971198] mpt3sas version 26.100.00.00 loaded [ 1.971598] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.972288] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.972449] xen: registering gsi 24 triggering 0 polarity 0 [ 1.972497] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.972539] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 2.022688] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.023014] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 2.023567] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 2.023721] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x(____ptrval____)), size(65536) [ 2.023967] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.081643] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.081946] mpt2sas_cm0: sending diag reset !! [ 2.344098] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c68417a1, max_idle_ns: 440795206594 ns [ 2.344586] clocksource: Switched to clocksource tsc [ 2.438695] random: crng init done [ 3.381000] mpt2sas_cm0: diag reset: SUCCESS [ 3.425715] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.425948] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.426210] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.473918] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.474282] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.474300] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.474826] mpt2sas_cm0: Protocol=( [ 3.474827] Initiator [ 3.474992] ,Target [ 3.475130] ), [ 3.475267] Capabilities=( [ 3.475407] Raid [ 3.475589] ,TLR [ 3.475728] ,EEDP [ 3.475865] ,Snapshot Buffer [ 3.476008] ,Diag Trace Buffer [ 3.476148] ,Task Set Full [ 3.476288] ,NCQ [ 3.476429] ) [ 3.476942] scsi host4: Fusion MPT SAS Host [ 3.491023] mpt2sas_cm0: sending port enable !! [ 5.057567] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 11.183027] mpt2sas_cm0: port enable: SUCCESS [ 11.184985] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.185230] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 11.185473] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 11.185747] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.187111] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.188276] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.283163] sd 4:0:0:0: [sda] Write Protect is off [ 11.283368] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.283915] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.358331] sda: sda1 sda2 < sda5 > [ 11.434226] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.263831] PM: Image not found (code -22) [ 12.674012] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 13.009625] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.514514] systemd-udevd[1522]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.822535] systemd-udevd[1534]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.822549] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.850024] systemd-udevd[1536]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.850083] systemd-udevd[1546]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.857576] systemd-udevd[1536]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.858148] systemd-udevd[1546]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.858558] systemd-udevd[1539]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.858839] systemd-udevd[1534]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.915404] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.315051] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.378511] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.464187] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 18.067730] systemd-udevd[1534]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 18.073110] xenbr0: port 1(eth0) entered blocking state [ 18.073286] xenbr0: port 1(eth0) entered disabled state [ 18.073533] device eth0 entered promiscuous mode [ 18.161294] bnx2 0000:02:00.0 eth0: using MSIX [ 18.169608] xenbr0: port 1(eth0) entered blocking state [ 18.169781] xenbr0: port 1(eth0) entered forwarding state [ 18.169972] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready