[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031358] tsc: Fast TSC calibration using PIT [ 0.031364] tsc: Detected 2800.077 MHz processor [ 0.031366] tsc: Detected 2800.052 MHz TSC [ 0.053343] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053349] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053355] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.053358] Disabled [ 0.053360] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053369] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053460] Scanning 1 areas for low memory corruption [ 0.055392] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.130473] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.132676] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.132716] ACPI: Early table checksum verification disabled [ 0.147452] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.147468] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147523] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.147644] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.147658] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.147668] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.147678] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.147692] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147705] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147717] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147729] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147742] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147754] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147766] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147779] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147791] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147805] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147817] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.147830] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.147843] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.147856] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.147868] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.147904] ACPI: Local APIC address 0xfee00000 [ 0.147907] Setting APIC routing to Xen PV. [ 0.148930] Zone ranges: [ 0.148937] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.148940] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.148942] Normal empty [ 0.148944] Movable zone start for each node [ 0.148945] Early memory node ranges [ 0.148947] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.148948] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.148952] Reserved but unavailable: 1 pages [ 0.148955] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.148959] On node 0 totalpages: 131071 [ 0.148961] DMA zone: 64 pages used for memmap [ 0.148962] DMA zone: 21 pages reserved [ 0.148964] DMA zone: 3997 pages, LIFO batch:0 [ 0.149165] DMA32 zone: 1986 pages used for memmap [ 0.149166] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.155653] p2m virtual area at (____ptrval____), size is 40000000 [ 0.351825] Remapped 98 page(s) [ 0.352300] ACPI: PM-Timer IO Port: 0x808 [ 0.352307] ACPI: Local APIC address 0xfee00000 [ 0.352493] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.352563] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.352572] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.352608] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.352617] ACPI: IRQ0 used by override. [ 0.352618] ACPI: IRQ9 used by override. [ 0.352653] Using ACPI (MADT) for SMP configuration information [ 0.352658] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.352666] ACPI: SPCR: SPCR table version 1 [ 0.352671] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.352682] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.352712] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.352714] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.352716] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.352720] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.352741] Booting paravirtualized kernel on Xen [ 0.352743] Xen version: 4.16-rc (preserve-AD) [ 0.352750] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.504789] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.504816] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.506156] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.506167] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.506170] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.506316] xen: PV spinlocks enabled [ 0.506323] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.506333] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.506340] Kernel command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.506782] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.506962] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.605487] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.611494] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.611676] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.613222] rcu: Hierarchical RCU implementation. [ 0.613225] rcu: RCU event tracing is enabled. [ 0.613227] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.613230] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.614246] Using NULL legacy PIC [ 0.614249] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.614338] xen:events: Using FIFO-based ABI [ 0.614408] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.614416] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.614424] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.614430] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.614435] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.614441] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.614447] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.614453] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.614458] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.614464] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.614470] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.614476] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.614482] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.614489] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.614494] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.620784] Console: colour VGA+ 80x25 [ 0.636614] console [tty0] enabled [ 0.637136] console [hvc0] enabled [ 0.637324] ACPI: Core revision 20180810 [ 0.644165] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.644423] Xen: using vcpuop timer interface [ 0.644431] installing Xen timer for CPU 0 [ 0.644716] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c71ccff4, max_idle_ns: 440795309360 ns [ 0.645022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.10 BogoMIPS (lpj=2800052) [ 0.645306] pid_max: default: 32768 minimum: 301 [ 0.645507] Security Framework initialized [ 0.645989] SELinux: Initializing. [ 0.646220] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.646385] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.647013] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.647174] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.647349] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.647597] Spectre V2 : Mitigation: Full AMD retpoline [ 0.647748] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.648296] Freeing SMP alternatives memory: 36K [ 0.651204] cpu 0 spinlock event irq 57 [ 0.651369] VPMU disabled by hypervisor. [ 0.651737] Performance Events: PMU not available due to virtualization, using software events only. [ 0.652082] rcu: Hierarchical SRCU implementation. [ 0.652603] smp: Bringing up secondary CPUs ... [ 0.652945] installing Xen timer for CPU 1 [ 0.653372] cpu 1 spinlock event irq 69 [ 0.653372] installing Xen timer for CPU 2 [ 0.654361] cpu 2 spinlock event irq 76 [ 0.655016] installing Xen timer for CPU 3 [ 0.655481] cpu 3 spinlock event irq 83 [ 0.656000] installing Xen timer for CPU 4 [ 0.656530] cpu 4 spinlock event irq 90 [ 0.657089] installing Xen timer for CPU 5 [ 0.657600] cpu 5 spinlock event irq 97 [ 0.658127] installing Xen timer for CPU 6 [ 0.658536] cpu 6 spinlock event irq 104 [ 0.659066] installing Xen timer for CPU 7 [ 0.659502] cpu 7 spinlock event irq 111 [ 0.659502] smp: Brought up 1 node, 8 CPUs [ 0.659980] smpboot: Max logical packages: 1 [ 0.660440] devtmpfs: initialized [ 0.661109] x86/mm: Memory block size: 128MB [ 0.662233] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.662496] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.662953] RTC time: 20:34:28, date: 11/22/21 [ 0.663248] NET: Registered protocol family 16 [ 0.663438] xen:grant_table: Grant tables using version 1 layout [ 0.663716] Grant table initialized [ 0.664245] audit: initializing netlink subsys (disabled) [ 0.664420] audit: type=2000 audit(1637613268.804:1): state=initialized audit_enabled=0 res=1 [ 0.665132] node 0 link 1: io port [e000, ffff] [ 0.665148] TOM: 00000000c0000000 aka 3072M [ 0.665310] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.665316] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.665326] node 0 link 1: mmio [fec80000, fecbffff] [ 0.665330] TOM2: 0000000840000000 aka 33792M [ 0.665504] bus: [bus 00-3f] on node 0 link 1 [ 0.665506] bus: 00 [io 0x0000-0xffff] [ 0.665507] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.665508] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.665508] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.666178] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.666433] ACPI: bus type PCI registered [ 0.667166] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.667446] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.681147] PCI: Using configuration type 1 for base access [ 0.688205] ACPI: Added _OSI(Module Device) [ 0.688394] ACPI: Added _OSI(Processor Device) [ 0.688995] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.689152] ACPI: Added _OSI(Processor Aggregator Device) [ 0.689310] ACPI: Added _OSI(Linux-Dell-Video) [ 0.689469] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.688988] random: fast init done [ 0.693938] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.694349] xen: registering gsi 9 triggering 0 polarity 1 [ 0.694829] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.699352] ACPI: Interpreter enabled [ 0.699528] ACPI: (supports S0 S4 S5) [ 0.699977] ACPI: Using IOAPIC for interrupt routing [ 0.700214] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.700736] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.720503] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.720691] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.721764] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.721976] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.724976] PCI host bridge to bus 0000:00 [ 0.724976] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.724976] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.724976] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.725137] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.725295] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.725454] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.725739] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.725975] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.726217] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.726470] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.726720] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.726975] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.727193] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.727977] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.728145] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.728145] pci 0000:00:02.0: enabling Extended Tags [ 0.728145] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.728973] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.728973] pci 0000:00:09.0: enabling Extended Tags [ 0.728973] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.729024] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.729024] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.729024] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.729024] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.729024] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.729024] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.729024] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.729024] pci 0000:00:11.0: set SATA to AHCI mode [ 0.730182] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.730223] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.730450] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.730495] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.730731] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.730780] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.730970] pci 0000:00:12.2: supports D1 D2 [ 0.730971] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.731107] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.731148] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.731397] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.731439] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.731689] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.731738] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.731943] pci 0000:00:13.2: supports D1 D2 [ 0.731945] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.732079] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.732394] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.732465] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.732485] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.732505] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.732525] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.732545] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.732748] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.733028] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.733270] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.733495] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.733668] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.733837] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.734030] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.734239] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.734459] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.734637] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.734795] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.734985] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.735281] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.735318] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.735345] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.735371] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.735404] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.735420] pci 0000:01:00.0: enabling Extended Tags [ 0.735713] pci 0000:01:00.0: supports D1 D2 [ 0.735857] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.735987] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.735993] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.736153] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.736207] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.736458] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.736528] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.736908] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.736962] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.737214] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.737442] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.737609] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.737644] pci_bus 0000:03: extended config space not accessible [ 0.737861] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.737904] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.737927] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.737951] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.738265] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.738462] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.738469] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.738472] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.738473] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.738475] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.738477] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.738478] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.738479] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.738481] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.738482] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.738483] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.738484] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.738486] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.738534] pci_bus 0000:00: on NUMA node 0 [ 0.738702] xen: registering gsi 13 triggering 1 polarity 0 [ 0.740875] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.741075] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.741332] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.741596] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.741853] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.742072] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.742326] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.742587] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.742861] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.743075] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.743333] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.743586] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.743835] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.744072] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.744330] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.744580] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.744836] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.745070] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.745324] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.745593] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.745846] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.746070] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.746330] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.746577] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.746904] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.747076] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.747332] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.747587] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.747840] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.748074] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.748327] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.748580] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.749045] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.749349] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.749649] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.749939] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.750144] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.750433] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.750754] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.751052] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.751626] xen:balloon: Initialising balloon driver [ 0.752142] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.752257] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.752257] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.752257] vgaarb: loaded [ 0.753000] SCSI subsystem initialized [ 0.753099] libata version 3.00 loaded. [ 0.753099] ACPI: bus type USB registered [ 0.754022] usbcore: registered new interface driver usbfs [ 0.754022] usbcore: registered new interface driver hub [ 0.754038] usbcore: registered new device driver usb [ 0.754044] pps_core: LinuxPPS API ver. 1 registered [ 0.754044] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.754257] PTP clock support registered [ 0.755070] EDAC MC: Ver: 3.0.0 [ 0.756140] Advanced Linux Sound Architecture Driver Initialized. [ 0.756335] PCI: Using ACPI for IRQ routing [ 0.760385] PCI: pci_cache_line_size set to 64 bytes [ 0.760557] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.760713] Expanded resource Reserved due to conflict with Reserved [ 0.760899] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.760904] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.761126] NetLabel: Initializing [ 0.761272] NetLabel: domain hash size = 128 [ 0.761441] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.761621] NetLabel: unlabeled traffic allowed by default [ 0.762975] clocksource: Switched to clocksource tsc-early [ 0.778694] VFS: Disk quotas dquot_6.6.0 [ 0.778922] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.779122] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.779424] pnp: PnP ACPI init [ 0.779920] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.779961] xen: registering gsi 8 triggering 1 polarity 0 [ 0.780015] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.780365] xen: registering gsi 4 triggering 1 polarity 0 [ 0.780367] Already setup the GSI :4 [ 0.780682] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.781034] xen: registering gsi 3 triggering 1 polarity 0 [ 0.781114] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.782604] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.782759] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.782945] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.783114] system 00:04: [io 0x0dff] has been reserved [ 0.783263] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.783415] system 00:04: [io 0x0eff] has been reserved [ 0.783573] system 00:04: [io 0x040b] has been reserved [ 0.783756] system 00:04: [io 0x04d6] has been reserved [ 0.783904] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.784091] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.784243] system 00:04: [io 0x0c14] has been reserved [ 0.784395] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.784552] system 00:04: [io 0x0c6c] has been reserved [ 0.784704] system 00:04: [io 0x0c6f] has been reserved [ 0.784854] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.785023] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.785179] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.785359] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.785513] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.785667] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.785819] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.785979] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.786136] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.786292] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.786482] system 00:04: [io 0x0950] has been reserved [ 0.786675] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.786748] pnp 00:05: [irq 0 disabled] [ 0.786799] system 00:05: [io 0x0ca8] has been reserved [ 0.786955] system 00:05: [io 0x0cac] has been reserved [ 0.787143] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.788487] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.788665] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.788922] pnp: PnP ACPI: found 7 devices [ 0.802408] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.802670] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.802822] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.803004] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.803193] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.803348] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.803519] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.803707] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.803869] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.804138] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.804139] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.804140] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.804142] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.804143] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.804144] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.804146] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.804147] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.804148] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.804150] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.804151] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.804152] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.804153] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.804155] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.804157] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.804159] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.804160] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.804161] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.804162] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.804164] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.804165] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.804166] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.804167] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.804169] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.804170] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.804171] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.804172] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.804300] NET: Registered protocol family 2 [ 0.804728] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.805031] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.805209] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.805403] TCP: Hash tables configured (established 4096 bind 4096) [ 0.805628] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.805798] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.806043] NET: Registered protocol family 1 [ 0.807031] RPC: Registered named UNIX socket transport module. [ 0.807295] RPC: Registered udp transport module. [ 0.807453] RPC: Registered tcp transport module. [ 0.807615] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.808407] xen: registering gsi 16 triggering 0 polarity 1 [ 0.808481] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.935299] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 124064 usecs [ 0.935675] xen: registering gsi 16 triggering 0 polarity 1 [ 0.935695] Already setup the GSI :16 [ 0.936039] xen: registering gsi 17 triggering 0 polarity 1 [ 0.936089] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.936250] xen: registering gsi 18 triggering 0 polarity 1 [ 0.936273] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.936417] xen: registering gsi 18 triggering 0 polarity 1 [ 0.936420] Already setup the GSI :18 [ 0.936721] xen: registering gsi 19 triggering 0 polarity 1 [ 0.936739] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.936957] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.937222] PCI: CLS 64 bytes, default 64 [ 0.937346] Unpacking initramfs... [ 1.377133] Freeing initrd memory: 27456K [ 1.377575] kvm: no hardware support [ 1.377749] has_svm: svm not available [ 1.377896] kvm: no hardware support [ 1.381269] Scanning for low memory corruption every 60 seconds [ 1.382807] Initialise system trusted keyrings [ 1.383319] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.386330] NFS: Registering the id_resolver key type [ 1.386521] Key type id_resolver registered [ 1.386702] Key type id_legacy registered [ 1.394668] Key type asymmetric registered [ 1.394875] Asymmetric key parser 'x509' registered [ 1.395125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.395368] io scheduler noop registered [ 1.395521] io scheduler deadline registered [ 1.395778] io scheduler cfq registered (default) [ 1.395931] io scheduler mq-deadline registered [ 1.396113] io scheduler kyber registered [ 1.397170] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.397355] xen: registering gsi 52 triggering 0 polarity 0 [ 1.397424] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.397860] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.398025] xen: registering gsi 53 triggering 0 polarity 0 [ 1.398041] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.398299] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.398526] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.398944] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.399273] ACPI: Power Button [PWRF] [ 1.400425] Warning: Processor Platform Limit not supported. [ 1.401015] xen:xen_evtchn: Event-channel device installed [ 1.401322] xen_pciback: backend is vpci [ 1.402357] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.423768] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.425159] hpet_acpi_add: no address or irqs in _CRS [ 1.425466] Non-volatile memory driver v1.3 [ 1.425683] AMD IOMMUv2 driver by Joerg Roedel [ 1.425839] AMD IOMMUv2 functionality not available on this system [ 1.431285] loop: module loaded [ 1.438544] ahci 0000:00:11.0: version 3.0 [ 1.438757] xen: registering gsi 22 triggering 0 polarity 1 [ 1.438819] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.439044] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.439305] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.440619] scsi host0: ahci [ 1.441274] scsi host1: ahci [ 1.441888] scsi host2: ahci [ 1.442557] scsi host3: ahci [ 1.442913] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.443248] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.443511] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.443784] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.444314] tun: Universal TUN/TAP device driver, 1.6 [ 1.444673] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.444831] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.445064] sky2: driver version 1.30 [ 1.445283] xen_netfront: Initialising Xen virtual ethernet driver [ 1.445663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.445829] ehci-pci: EHCI PCI platform driver [ 1.446180] xen: registering gsi 17 triggering 0 polarity 1 [ 1.446191] Already setup the GSI :17 [ 1.446480] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.446759] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.447023] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.447290] ehci-pci 0000:00:12.2: debug port 1 [ 1.447735] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.454083] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.454383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.454664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.454928] usb usb1: Product: EHCI Host Controller [ 1.455095] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.455251] usb usb1: SerialNumber: 0000:00:12.2 [ 1.455788] hub 1-0:1.0: USB hub found [ 1.455989] hub 1-0:1.0: 6 ports detected [ 1.456575] xen: registering gsi 19 triggering 0 polarity 1 [ 1.456591] Already setup the GSI :19 [ 1.456821] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.457133] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.457418] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.457690] ehci-pci 0000:00:13.2: debug port 1 [ 1.458024] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.465067] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.465364] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.465616] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.465904] usb usb2: Product: EHCI Host Controller [ 1.466076] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.466231] usb usb2: SerialNumber: 0000:00:13.2 [ 1.466759] hub 2-0:1.0: USB hub found [ 1.466943] hub 2-0:1.0: 6 ports detected [ 1.467437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.467627] ohci-pci: OHCI PCI platform driver [ 1.468007] xen: registering gsi 16 triggering 0 polarity 1 [ 1.468018] Already setup the GSI :16 [ 1.468246] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.468581] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.468965] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.525221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.525564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.525806] usb usb3: Product: OHCI PCI host controller [ 1.525959] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.526136] usb usb3: SerialNumber: 0000:00:12.0 [ 1.526668] hub 3-0:1.0: USB hub found [ 1.526853] hub 3-0:1.0: 3 ports detected [ 1.527410] xen: registering gsi 16 triggering 0 polarity 1 [ 1.527439] Already setup the GSI :16 [ 1.527662] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.527963] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.528365] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.584203] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.584500] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.584741] usb usb4: Product: OHCI PCI host controller [ 1.584897] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.585073] usb usb4: SerialNumber: 0000:00:12.1 [ 1.585616] hub 4-0:1.0: USB hub found [ 1.585777] hub 4-0:1.0: 3 ports detected [ 1.586297] xen: registering gsi 18 triggering 0 polarity 1 [ 1.586315] Already setup the GSI :18 [ 1.586536] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.586928] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.587334] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.644200] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.644514] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.644767] usb usb5: Product: OHCI PCI host controller [ 1.644921] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.645090] usb usb5: SerialNumber: 0000:00:13.0 [ 1.645616] hub 5-0:1.0: USB hub found [ 1.645777] hub 5-0:1.0: 3 ports detected [ 1.646326] xen: registering gsi 18 triggering 0 polarity 1 [ 1.646344] Already setup the GSI :18 [ 1.646605] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.646946] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.647276] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.703197] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.703497] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.703742] usb usb6: Product: OHCI PCI host controller [ 1.703919] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.704085] usb usb6: SerialNumber: 0000:00:13.1 [ 1.704633] hub 6-0:1.0: USB hub found [ 1.704796] hub 6-0:1.0: 3 ports detected [ 1.705245] uhci_hcd: USB Universal Host Controller Interface driver [ 1.705498] usbcore: registered new interface driver usblp [ 1.705718] usbcore: registered new interface driver usb-storage [ 1.705932] i8042: PNP: No PS/2 controller found. [ 1.706100] i8042: Probing ports directly. [ 1.709280] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.709497] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.710159] rtc_cmos 00:01: RTC can wake from S4 [ 1.710696] rtc_cmos 00:01: registered as rtc0 [ 1.710887] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.711264] device-mapper: uevent: version 1.0.3 [ 1.711630] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.711923] hidraw: raw HID events driver (C) Jiri Kosina [ 1.712440] usbcore: registered new interface driver usbhid [ 1.712633] usbhid: USB HID core driver [ 1.714300] Initializing XFRM netlink socket [ 1.714679] NET: Registered protocol family 10 [ 1.715336] Segment Routing with IPv6 [ 1.716165] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.716601] NET: Registered protocol family 17 [ 1.716790] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.717119] Key type dns_resolver registered [ 1.718349] mce: Using 2 MCE banks [ 1.718565] sched_clock: Marking stable (1687784709, 30462816)->(1724101525, -5854000) [ 1.720086] registered taskstats version 1 [ 1.720237] Loading compiled-in X.509 certificates [ 1.721064] Magic number: 13:835:599 [ 1.721342] serial8250 serial8250: hash matches [ 1.721581] acpi PNP0C0F:0b: hash matches [ 1.721793] console [netcon0] enabled [ 1.721938] netconsole: network logging started [ 1.722227] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.722293] ata2: SATA link down (SStatus 0 SControl 300) [ 1.724359] ata1: SATA link down (SStatus 0 SControl 300) [ 1.724582] ata3: SATA link down (SStatus 0 SControl 300) [ 1.724835] ata4: SATA link down (SStatus 0 SControl 300) [ 1.735442] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.735730] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.735974] cfg80211: failed to load regulatory.db [ 1.736213] ALSA device list: [ 1.736357] No soundcards found. [ 1.738190] Freeing unused kernel image memory: 1344K [ 1.747058] Write protecting the kernel read-only data: 18432k [ 1.756335] Freeing unused kernel image memory: 1992K [ 1.758004] Freeing unused kernel image memory: 1444K [ 1.758162] Run /init as init process [ 1.771198] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.900266] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.900589] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.901547] hub 1-3:1.0: USB hub found [ 1.901864] hub 1-3:1.0: 4 ports detected [ 1.971379] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.971903] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.972071] xen: registering gsi 48 triggering 0 polarity 0 [ 1.972120] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.972904] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a7:02 [ 1.973400] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.973559] xen: registering gsi 49 triggering 0 polarity 0 [ 1.973580] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.974275] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a7:03 [ 1.976215] mpt3sas version 26.100.00.00 loaded [ 1.976666] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.977501] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.977694] xen: registering gsi 24 triggering 0 polarity 0 [ 1.977782] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.977826] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 2.012381] random: crng init done [ 2.031133] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.031491] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 2.032012] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 2.032167] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x000000002e0cc2aa), size(65536) [ 2.032406] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.086825] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.087147] mpt2sas_cm0: sending diag reset !! [ 2.341170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c71ccff4, max_idle_ns: 440795309360 ns [ 2.341651] clocksource: Switched to clocksource tsc [ 3.386154] mpt2sas_cm0: diag reset: SUCCESS [ 3.430598] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.430833] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.431097] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.462987] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.463340] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.463359] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.463866] mpt2sas_cm0: Protocol=( [ 3.463867] Initiator [ 3.464033] ,Target [ 3.464200] ), [ 3.464337] Capabilities=( [ 3.464474] Raid [ 3.464636] ,TLR [ 3.464772] ,EEDP [ 3.464908] ,Snapshot Buffer [ 3.465050] ,Diag Trace Buffer [ 3.465193] ,Task Set Full [ 3.465359] ,NCQ [ 3.465497] ) [ 3.465965] scsi host4: Fusion MPT SAS Host [ 3.479689] mpt2sas_cm0: sending port enable !! [ 5.063147] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5600), phys(8) [ 11.195038] mpt2sas_cm0: port enable: SUCCESS [ 11.197029] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.197273] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002536ebe0) [ 11.197518] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5600), slot(0) [ 11.197809] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.199197] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.200433] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.296874] sd 4:0:0:0: [sda] Write Protect is off [ 11.297071] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.297645] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.366674] sda: sda1 sda2 < sda5 > [ 11.439652] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.238502] PM: Image not found (code -22) [ 12.631907] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.934258] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.488319] systemd-udevd[1523]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.809835] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.809837] systemd-udevd[1524]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.847966] systemd-udevd[1539]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.848089] systemd-udevd[1524]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.851026] systemd-udevd[1535]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.851050] systemd-udevd[1537]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.858021] systemd-udevd[1537]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.858025] systemd-udevd[1535]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.898662] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.239087] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.299786] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.388458] Adding 1949692k swap on /dev/mapper/nocera0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 18.050515] systemd-udevd[1536]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 18.055887] xenbr0: port 1(eth0) entered blocking state [ 18.056070] xenbr0: port 1(eth0) entered disabled state [ 18.056329] device eth0 entered promiscuous mode [ 18.147331] bnx2 0000:02:00.0 eth0: using MSIX [ 18.156031] xenbr0: port 1(eth0) entered blocking state [ 18.156214] xenbr0: port 1(eth0) entered forwarding state [ 18.156387] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready