[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000454] tsc: Detected 2800.048 MHz processor [ 0.022455] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.022460] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.022467] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.022470] Disabled [ 0.022473] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.022481] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.022572] Scanning 1 areas for low memory corruption [ 0.024487] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.096519] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.098776] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.098813] ACPI: Early table checksum verification disabled [ 0.113551] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.113563] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113618] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.113728] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.113741] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.113751] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.113760] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.113772] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113784] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113796] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113808] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113819] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113830] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113842] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113853] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113864] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113876] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113888] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.113899] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.113911] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.113923] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.113935] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.113973] ACPI: Local APIC address 0xfee00000 [ 0.113975] Setting APIC routing to Xen PV. [ 0.115050] Zone ranges: [ 0.115055] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.115058] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.115060] Normal empty [ 0.115062] Movable zone start for each node [ 0.115063] Early memory node ranges [ 0.115065] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.115066] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.115070] Reserved but unavailable: 1 pages [ 0.115073] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.115077] On node 0 totalpages: 131071 [ 0.115080] DMA zone: 64 pages used for memmap [ 0.115081] DMA zone: 21 pages reserved [ 0.115082] DMA zone: 3997 pages, LIFO batch:0 [ 0.115277] DMA32 zone: 1986 pages used for memmap [ 0.115278] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.121823] p2m virtual area at (____ptrval____), size is 40000000 [ 0.317840] Remapped 98 page(s) [ 0.318295] ACPI: PM-Timer IO Port: 0x808 [ 0.318303] ACPI: Local APIC address 0xfee00000 [ 0.318490] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.318549] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.318558] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.318594] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.318602] ACPI: IRQ0 used by override. [ 0.318603] ACPI: IRQ9 used by override. [ 0.318641] Using ACPI (MADT) for SMP configuration information [ 0.318646] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.318654] ACPI: SPCR: SPCR table version 1 [ 0.318659] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.318670] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.318701] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.318704] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.318705] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.318709] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.318714] Booting paravirtualized kernel on Xen [ 0.318716] Xen version: 4.16-rc (preserve-AD) [ 0.318723] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.473806] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.473832] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.475135] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.475146] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.475149] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.475294] xen: PV spinlocks enabled [ 0.475302] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.475311] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.475317] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.475757] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.475916] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.573430] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.579474] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.579657] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.581132] rcu: Hierarchical RCU implementation. [ 0.581134] rcu: RCU event tracing is enabled. [ 0.581136] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.581139] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.582175] Using NULL legacy PIC [ 0.582178] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.582267] xen:events: Using FIFO-based ABI [ 0.582318] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.582325] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.582333] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.582338] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.582343] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.582349] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.582354] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.582359] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.582365] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.582370] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.582379] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.582384] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.582390] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.582395] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.582401] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.588755] Console: colour VGA+ 80x25 [ 0.604190] console [tty0] enabled [ 0.604678] console [hvc0] enabled [ 0.604837] ACPI: Core revision 20180810 [ 0.611868] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.612127] Xen: using vcpuop timer interface [ 0.612137] installing Xen timer for CPU 0 [ 0.612419] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c6e38acc, max_idle_ns: 440795291487 ns [ 0.612727] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.09 BogoMIPS (lpj=2800048) [ 0.613000] pid_max: default: 32768 minimum: 301 [ 0.613206] Security Framework initialized [ 0.613694] SELinux: Initializing. [ 0.613926] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.614091] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.614720] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.614875] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.615056] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.615301] Spectre V2 : Mitigation: Full AMD retpoline [ 0.615453] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.616003] Freeing SMP alternatives memory: 36K [ 0.618909] cpu 0 spinlock event irq 57 [ 0.619071] VPMU disabled by hypervisor. [ 0.619451] Performance Events: PMU not available due to virtualization, using software events only. [ 0.619786] rcu: Hierarchical SRCU implementation. [ 0.620303] smp: Bringing up secondary CPUs ... [ 0.620646] installing Xen timer for CPU 1 [ 0.621186] cpu 1 spinlock event irq 69 [ 0.621759] installing Xen timer for CPU 2 [ 0.622281] cpu 2 spinlock event irq 76 [ 0.622886] installing Xen timer for CPU 3 [ 0.623324] cpu 3 spinlock event irq 83 [ 0.623867] installing Xen timer for CPU 4 [ 0.624399] cpu 4 spinlock event irq 90 [ 0.624861] installing Xen timer for CPU 5 [ 0.625362] cpu 5 spinlock event irq 97 [ 0.625861] installing Xen timer for CPU 6 [ 0.626280] cpu 6 spinlock event irq 104 [ 0.626874] installing Xen timer for CPU 7 [ 0.627325] cpu 7 spinlock event irq 111 [ 0.627685] smp: Brought up 1 node, 8 CPUs [ 0.627837] smpboot: Max logical packages: 1 [ 0.628684] devtmpfs: initialized [ 0.628949] x86/mm: Memory block size: 128MB [ 0.629956] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.630220] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.630793] RTC time: 23:30:32, date: 11/22/21 [ 0.631212] NET: Registered protocol family 16 [ 0.631400] xen:grant_table: Grant tables using version 1 layout [ 0.631630] Grant table initialized [ 0.632073] audit: initializing netlink subsys (disabled) [ 0.632274] audit: type=2000 audit(1637623832.512:1): state=initialized audit_enabled=0 res=1 [ 0.632943] node 0 link 1: io port [e000, ffff] [ 0.632959] TOM: 00000000c0000000 aka 3072M [ 0.633125] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.633131] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.633140] node 0 link 1: mmio [fec80000, fecbffff] [ 0.633146] TOM2: 0000000840000000 aka 33792M [ 0.633146] bus: [bus 00-3f] on node 0 link 1 [ 0.633146] bus: 00 [io 0x0000-0xffff] [ 0.633146] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.633146] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.633146] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.633863] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.633863] ACPI: bus type PCI registered [ 0.634934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.634934] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.646971] PCI: Using configuration type 1 for base access [ 0.654911] ACPI: Added _OSI(Module Device) [ 0.654911] ACPI: Added _OSI(Processor Device) [ 0.654911] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.655017] ACPI: Added _OSI(Processor Aggregator Device) [ 0.655186] ACPI: Added _OSI(Linux-Dell-Video) [ 0.655335] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.657684] random: fast init done [ 0.659271] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.659765] xen: registering gsi 9 triggering 0 polarity 1 [ 0.660210] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.664140] ACPI: Interpreter enabled [ 0.664315] ACPI: (supports S0 S4 S5) [ 0.664490] ACPI: Using IOAPIC for interrupt routing [ 0.664693] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.666945] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.684832] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.685011] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.685985] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.686225] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.688448] PCI host bridge to bus 0000:00 [ 0.688597] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.688681] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.688841] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.689024] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.689184] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.689364] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.689600] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.689681] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.689919] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.690181] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.690416] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.690680] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.690861] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.691193] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.691835] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.691835] pci 0000:00:02.0: enabling Extended Tags [ 0.691835] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.691889] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.691957] pci 0000:00:09.0: enabling Extended Tags [ 0.692185] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.692329] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.692398] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.692416] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.692434] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.692452] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.692470] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.692488] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.692531] pci 0000:00:11.0: set SATA to AHCI mode [ 0.692838] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.692875] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.693074] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.693110] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.693322] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.693365] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.693528] pci 0000:00:12.2: supports D1 D2 [ 0.693530] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.693730] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.693730] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.693896] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.693932] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.694144] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.694197] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.694363] pci 0000:00:13.2: supports D1 D2 [ 0.694364] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.694495] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.694781] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.694848] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.694866] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.694883] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.694901] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.694918] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.695096] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.695357] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.695728] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.695745] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.695900] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.696056] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.696222] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.696374] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.696715] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.696720] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.696859] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.697030] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.697308] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.697348] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.697371] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.697395] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.697422] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.697435] pci 0000:01:00.0: enabling Extended Tags [ 0.697701] pci 0000:01:00.0: supports D1 D2 [ 0.697832] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.697995] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.698000] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.698108] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.698156] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.698371] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.698432] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.698781] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.698827] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.699044] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.699203] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.699363] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.699393] pci_bus 0000:03: extended config space not accessible [ 0.699678] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.699678] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.699687] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.699707] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.699986] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.700185] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.700191] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.700193] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.700195] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.700196] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.700197] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.700198] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.700200] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.700202] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.700205] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.700206] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.700208] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.700209] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.700248] pci_bus 0000:00: on NUMA node 0 [ 0.700364] xen: registering gsi 13 triggering 1 polarity 0 [ 0.702420] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.702659] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.702772] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.703011] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.703275] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.703513] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.703755] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.703996] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.704227] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.704491] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.704783] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.705033] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.705275] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.705575] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.705768] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.706007] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.706235] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.706472] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.706729] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.706967] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.707200] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.707435] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.707681] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.707922] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.708162] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.708402] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.708641] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.708767] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.709007] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.709253] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.709530] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.709767] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.710188] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.710446] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.710711] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.710989] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.711263] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.711565] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.711796] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.712069] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.712863] xen:balloon: Initialising balloon driver [ 0.712867] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.712969] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.713718] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.713898] vgaarb: loaded [ 0.714353] SCSI subsystem initialized [ 0.714736] libata version 3.00 loaded. [ 0.714750] ACPI: bus type USB registered [ 0.714986] usbcore: registered new interface driver usbfs [ 0.715185] usbcore: registered new interface driver hub [ 0.715477] usbcore: registered new device driver usb [ 0.715713] pps_core: LinuxPPS API ver. 1 registered [ 0.715749] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.716052] PTP clock support registered [ 0.716801] EDAC MC: Ver: 3.0.0 [ 0.717301] Advanced Linux Sound Architecture Driver Initialized. [ 0.717734] PCI: Using ACPI for IRQ routing [ 0.722436] PCI: pci_cache_line_size set to 64 bytes [ 0.722593] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.722681] Expanded resource Reserved due to conflict with Reserved [ 0.722839] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.722842] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.723100] NetLabel: Initializing [ 0.723267] NetLabel: domain hash size = 128 [ 0.723418] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.723623] NetLabel: unlabeled traffic allowed by default [ 0.724020] clocksource: Switched to clocksource tsc-early [ 0.740624] VFS: Disk quotas dquot_6.6.0 [ 0.740872] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.741096] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.741453] pnp: PnP ACPI init [ 0.741965] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.742004] xen: registering gsi 8 triggering 1 polarity 0 [ 0.742044] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.742473] xen: registering gsi 4 triggering 1 polarity 0 [ 0.742475] Already setup the GSI :4 [ 0.742778] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.743144] xen: registering gsi 3 triggering 1 polarity 0 [ 0.743263] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.744803] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.744961] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.745148] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.745309] system 00:04: [io 0x0dff] has been reserved [ 0.745476] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.745628] system 00:04: [io 0x0eff] has been reserved [ 0.745791] system 00:04: [io 0x040b] has been reserved [ 0.745944] system 00:04: [io 0x04d6] has been reserved [ 0.746095] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.746301] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.746457] system 00:04: [io 0x0c14] has been reserved [ 0.746610] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.746774] system 00:04: [io 0x0c6c] has been reserved [ 0.746928] system 00:04: [io 0x0c6f] has been reserved [ 0.747081] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.747239] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.747395] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.747577] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.747752] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.747906] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.748059] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.748220] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.748378] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.748531] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.748723] system 00:04: [io 0x0950] has been reserved [ 0.748888] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.748963] pnp 00:05: [irq 0 disabled] [ 0.749018] system 00:05: [io 0x0ca8] has been reserved [ 0.749175] system 00:05: [io 0x0cac] has been reserved [ 0.749338] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.750754] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.750924] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.751211] pnp: PnP ACPI: found 7 devices [ 0.765563] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.765894] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.766050] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.766214] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.766384] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.766542] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.766724] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.766883] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.767095] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.767361] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.767363] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.767364] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.767365] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.767367] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.767368] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.767369] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.767370] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.767371] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.767373] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.767374] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.767375] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.767377] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.767378] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.767380] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.767381] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.767383] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.767384] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.767385] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.767386] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.767387] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.767388] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.767390] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.767391] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.767392] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.767393] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.767394] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.767567] NET: Registered protocol family 2 [ 0.767972] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.768254] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.768447] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.768636] TCP: Hash tables configured (established 4096 bind 4096) [ 0.768886] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.769049] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.769310] NET: Registered protocol family 1 [ 0.770086] RPC: Registered named UNIX socket transport module. [ 0.770248] RPC: Registered udp transport module. [ 0.770394] RPC: Registered tcp transport module. [ 0.770542] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.771343] xen: registering gsi 16 triggering 0 polarity 1 [ 0.771400] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.900020] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 125854 usecs [ 0.900390] xen: registering gsi 16 triggering 0 polarity 1 [ 0.900406] Already setup the GSI :16 [ 0.900738] xen: registering gsi 17 triggering 0 polarity 1 [ 0.900808] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.900973] xen: registering gsi 18 triggering 0 polarity 1 [ 0.900984] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.901127] xen: registering gsi 18 triggering 0 polarity 1 [ 0.901129] Already setup the GSI :18 [ 0.901416] xen: registering gsi 19 triggering 0 polarity 1 [ 0.901432] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.901615] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.901874] PCI: CLS 64 bytes, default 64 [ 0.902000] Unpacking initramfs... [ 1.342231] Freeing initrd memory: 27456K [ 1.342615] kvm: no hardware support [ 1.342782] has_svm: svm not available [ 1.342931] kvm: no hardware support [ 1.346339] Scanning for low memory corruption every 60 seconds [ 1.347790] Initialise system trusted keyrings [ 1.348073] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.351091] NFS: Registering the id_resolver key type [ 1.351269] Key type id_resolver registered [ 1.351420] Key type id_legacy registered [ 1.357612] Key type asymmetric registered [ 1.357842] Asymmetric key parser 'x509' registered [ 1.359597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.359843] io scheduler noop registered [ 1.359997] io scheduler deadline registered [ 1.360269] io scheduler cfq registered (default) [ 1.360422] io scheduler mq-deadline registered [ 1.360569] io scheduler kyber registered [ 1.361577] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.361757] xen: registering gsi 52 triggering 0 polarity 0 [ 1.361813] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.362213] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.362367] xen: registering gsi 53 triggering 0 polarity 0 [ 1.362384] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.362708] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.362935] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.363471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.363754] ACPI: Power Button [PWRF] [ 1.364609] Warning: Processor Platform Limit not supported. [ 1.365234] xen:xen_evtchn: Event-channel device installed [ 1.365619] xen_pciback: backend is vpci [ 1.366943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.388339] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.389935] hpet_acpi_add: no address or irqs in _CRS [ 1.390288] Non-volatile memory driver v1.3 [ 1.390498] AMD IOMMUv2 driver by Joerg Roedel [ 1.390653] AMD IOMMUv2 functionality not available on this system [ 1.395966] loop: module loaded [ 1.403283] ahci 0000:00:11.0: version 3.0 [ 1.403499] xen: registering gsi 22 triggering 0 polarity 1 [ 1.403559] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.403766] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.404031] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.405339] scsi host0: ahci [ 1.405955] scsi host1: ahci [ 1.406634] scsi host2: ahci [ 1.407309] scsi host3: ahci [ 1.407647] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.407899] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.408136] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.408402] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.408965] tun: Universal TUN/TAP device driver, 1.6 [ 1.409317] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.409469] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.409689] sky2: driver version 1.30 [ 1.409910] xen_netfront: Initialising Xen virtual ethernet driver [ 1.410278] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.410433] ehci-pci: EHCI PCI platform driver [ 1.410756] xen: registering gsi 17 triggering 0 polarity 1 [ 1.410770] Already setup the GSI :17 [ 1.410986] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.411296] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.411539] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.411805] ehci-pci 0000:00:12.2: debug port 1 [ 1.412134] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.418775] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.419052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.419319] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.419555] usb usb1: Product: EHCI Host Controller [ 1.419749] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.419899] usb usb1: SerialNumber: 0000:00:12.2 [ 1.420408] hub 1-0:1.0: USB hub found [ 1.420593] hub 1-0:1.0: 6 ports detected [ 1.421092] xen: registering gsi 19 triggering 0 polarity 1 [ 1.421101] Already setup the GSI :19 [ 1.421315] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.421701] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.421971] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.422229] ehci-pci 0000:00:13.2: debug port 1 [ 1.422548] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.429767] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.430029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.430299] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.430535] usb usb2: Product: EHCI Host Controller [ 1.430708] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.430861] usb usb2: SerialNumber: 0000:00:13.2 [ 1.431360] hub 2-0:1.0: USB hub found [ 1.431539] hub 2-0:1.0: 6 ports detected [ 1.431985] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.432191] ohci-pci: OHCI PCI platform driver [ 1.432520] xen: registering gsi 16 triggering 0 polarity 1 [ 1.432531] Already setup the GSI :16 [ 1.432747] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.433064] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.433438] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.489889] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.490200] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.490469] usb usb3: Product: OHCI PCI host controller [ 1.490619] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.490779] usb usb3: SerialNumber: 0000:00:12.0 [ 1.491339] hub 3-0:1.0: USB hub found [ 1.491512] hub 3-0:1.0: 3 ports detected [ 1.491963] xen: registering gsi 16 triggering 0 polarity 1 [ 1.491975] Already setup the GSI :16 [ 1.492190] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.492555] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.492898] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.549886] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.550195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.550436] usb usb4: Product: OHCI PCI host controller [ 1.550585] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.550750] usb usb4: SerialNumber: 0000:00:12.1 [ 1.551247] hub 4-0:1.0: USB hub found [ 1.551432] hub 4-0:1.0: 3 ports detected [ 1.551895] xen: registering gsi 18 triggering 0 polarity 1 [ 1.551906] Already setup the GSI :18 [ 1.552116] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.552515] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.552912] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.608873] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.609148] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.609386] usb usb5: Product: OHCI PCI host controller [ 1.609537] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.609722] usb usb5: SerialNumber: 0000:00:13.0 [ 1.610250] hub 5-0:1.0: USB hub found [ 1.610405] hub 5-0:1.0: 3 ports detected [ 1.610853] xen: registering gsi 18 triggering 0 polarity 1 [ 1.610861] Already setup the GSI :18 [ 1.611095] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.611470] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.611775] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.667885] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.668159] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.668395] usb usb6: Product: OHCI PCI host controller [ 1.668572] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.668728] usb usb6: SerialNumber: 0000:00:13.1 [ 1.669217] hub 6-0:1.0: USB hub found [ 1.669374] hub 6-0:1.0: 3 ports detected [ 1.669776] uhci_hcd: USB Universal Host Controller Interface driver [ 1.670014] usbcore: registered new interface driver usblp [ 1.670204] usbcore: registered new interface driver usb-storage [ 1.670413] i8042: PNP: No PS/2 controller found. [ 1.670565] i8042: Probing ports directly. [ 1.673725] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.673926] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.674457] rtc_cmos 00:01: RTC can wake from S4 [ 1.674930] rtc_cmos 00:01: registered as rtc0 [ 1.675111] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.675445] device-mapper: uevent: version 1.0.3 [ 1.675803] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.676104] hidraw: raw HID events driver (C) Jiri Kosina [ 1.676562] usbcore: registered new interface driver usbhid [ 1.676726] usbhid: USB HID core driver [ 1.678507] Initializing XFRM netlink socket [ 1.678940] NET: Registered protocol family 10 [ 1.679542] Segment Routing with IPv6 [ 1.680352] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.680773] NET: Registered protocol family 17 [ 1.680943] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.681265] Key type dns_resolver registered [ 1.682608] mce: Using 2 MCE banks [ 1.682850] sched_clock: Marking stable (1652522777, 30261480)->(1688133778, -5349521) [ 1.684329] registered taskstats version 1 [ 1.684540] Loading compiled-in X.509 certificates [ 1.685244] Magic number: 13:603:555 [ 1.685510] misc xen!privcmd: hash matches [ 1.685718] clockevents clockevent6: hash matches [ 1.685982] acpi PNP0C0F:06: hash matches [ 1.686138] acpi PNP0C01:01: hash matches [ 1.686371] console [netcon0] enabled [ 1.686517] netconsole: network logging started [ 1.686766] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.698657] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.700544] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.700805] cfg80211: failed to load regulatory.db [ 1.701001] ALSA device list: [ 1.701170] No soundcards found. [ 1.705849] ata2: SATA link down (SStatus 0 SControl 300) [ 1.705880] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.706057] ata4: SATA link down (SStatus 0 SControl 300) [ 1.706525] ata1: SATA link down (SStatus 0 SControl 300) [ 1.706824] ata3: SATA link down (SStatus 0 SControl 300) [ 1.708668] Freeing unused kernel image memory: 1344K [ 1.716873] Write protecting the kernel read-only data: 18432k [ 1.725956] Freeing unused kernel image memory: 1992K [ 1.727798] Freeing unused kernel image memory: 1444K [ 1.727969] Run /init as init process [ 1.834277] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.834583] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.835587] hub 1-3:1.0: USB hub found [ 1.835916] hub 1-3:1.0: 4 ports detected [ 1.941420] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.941910] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.942066] xen: registering gsi 48 triggering 0 polarity 0 [ 1.942113] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.942951] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.943460] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.943617] xen: registering gsi 49 triggering 0 polarity 0 [ 1.944170] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.944949] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.946292] mpt3sas version 26.100.00.00 loaded [ 1.946715] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.947387] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.947544] xen: registering gsi 24 triggering 0 polarity 0 [ 1.947598] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.947645] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 1.986698] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.987091] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.987692] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.987848] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x(____ptrval____)), size(65536) [ 1.988089] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.043583] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.043916] mpt2sas_cm0: sending diag reset !! [ 2.307829] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c6e38acc, max_idle_ns: 440795291487 ns [ 2.308317] clocksource: Switched to clocksource tsc [ 2.335418] random: crng init done [ 3.345455] mpt2sas_cm0: diag reset: SUCCESS [ 3.390195] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.390428] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.390668] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.438574] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.438916] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.438933] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.439431] mpt2sas_cm0: Protocol=( [ 3.439432] Initiator [ 3.439575] ,Target [ 3.439776] ), [ 3.439917] Capabilities=( [ 3.440057] Raid [ 3.440220] ,TLR [ 3.440356] ,EEDP [ 3.440493] ,Snapshot Buffer [ 3.440631] ,Diag Trace Buffer [ 3.440777] ,Task Set Full [ 3.440918] ,NCQ [ 3.441085] ) [ 3.441560] scsi host4: Fusion MPT SAS Host [ 3.455715] mpt2sas_cm0: sending port enable !! [ 5.022275] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 11.147756] mpt2sas_cm0: port enable: SUCCESS [ 11.149713] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.149959] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 11.150223] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 11.150497] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.151843] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.153146] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.250059] sd 4:0:0:0: [sda] Write Protect is off [ 11.250281] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.250887] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.325215] sda: sda1 sda2 < sda5 > [ 11.401170] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.189014] PM: Image not found (code -22) [ 12.590500] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.943183] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.512530] systemd-udevd[1525]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.873354] systemd-udevd[1541]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.873645] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.895255] systemd-udevd[1544]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.895314] systemd-udevd[1538]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.933320] systemd-udevd[1541]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.933575] systemd-udevd[1544]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.934123] systemd-udevd[1538]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.934318] systemd-udevd[1539]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.873933] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.098561] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.162035] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.247681] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.960033] systemd-udevd[1541]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.964906] xenbr0: port 1(eth0) entered blocking state [ 17.965061] xenbr0: port 1(eth0) entered disabled state [ 17.965299] device eth0 entered promiscuous mode [ 18.066026] bnx2 0000:02:00.0 eth0: using MSIX [ 18.074552] xenbr0: port 1(eth0) entered blocking state [ 18.074749] xenbr0: port 1(eth0) entered forwarding state [ 18.074950] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready