[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.030064] tsc: Fast TSC calibration using PIT [ 0.030068] tsc: Detected 2800.035 MHz processor [ 0.030070] tsc: Detected 2800.066 MHz TSC [ 0.048062] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.048067] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.048073] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.048076] Disabled [ 0.048078] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.048085] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.048179] Scanning 1 areas for low memory corruption [ 0.050085] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.124535] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.126710] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.126743] ACPI: Early table checksum verification disabled [ 0.141387] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.141397] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141440] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.141539] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.141552] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.141561] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.141570] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.141581] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141592] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141601] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141611] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141622] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141633] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141644] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141654] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141664] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141674] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141685] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.141695] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.141707] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.141717] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.141727] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.141758] ACPI: Local APIC address 0xfee00000 [ 0.141761] Setting APIC routing to Xen PV. [ 0.142893] Zone ranges: [ 0.142898] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.142901] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.142903] Normal empty [ 0.142905] Movable zone start for each node [ 0.142906] Early memory node ranges [ 0.142908] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.142910] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.142913] Reserved but unavailable: 1 pages [ 0.142916] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.142920] On node 0 totalpages: 131071 [ 0.142921] DMA zone: 64 pages used for memmap [ 0.142922] DMA zone: 21 pages reserved [ 0.142923] DMA zone: 3997 pages, LIFO batch:0 [ 0.143099] DMA32 zone: 1986 pages used for memmap [ 0.143100] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.148703] p2m virtual area at (____ptrval____), size is 40000000 [ 0.344663] Remapped 98 page(s) [ 0.345101] ACPI: PM-Timer IO Port: 0x808 [ 0.345107] ACPI: Local APIC address 0xfee00000 [ 0.345263] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.345311] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.345319] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.345350] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.345357] ACPI: IRQ0 used by override. [ 0.345358] ACPI: IRQ9 used by override. [ 0.345388] Using ACPI (MADT) for SMP configuration information [ 0.345393] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.345401] ACPI: SPCR: SPCR table version 1 [ 0.345405] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.345414] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.345441] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.345443] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.345444] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.345449] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.345454] Booting paravirtualized kernel on Xen [ 0.345455] Xen version: 4.16-rc (preserve-AD) [ 0.345463] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.496826] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.496847] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.498183] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.498191] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.498193] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.498318] xen: PV spinlocks enabled [ 0.498326] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.498335] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.498340] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.498731] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.498861] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.588427] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.593686] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.593834] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.595276] rcu: Hierarchical RCU implementation. [ 0.595278] rcu: RCU event tracing is enabled. [ 0.595280] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.595283] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.596217] Using NULL legacy PIC [ 0.596220] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.596298] xen:events: Using FIFO-based ABI [ 0.596347] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.596353] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.596361] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.596366] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.596371] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.596376] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.596381] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.596387] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.596392] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.596397] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.596403] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.596408] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.596413] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.596418] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.596423] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.602476] Console: colour VGA+ 80x25 [ 0.618006] console [tty0] enabled [ 0.618494] console [hvc0] enabled [ 0.618653] ACPI: Core revision 20180810 [ 0.624349] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.624605] Xen: using vcpuop timer interface [ 0.624613] installing Xen timer for CPU 0 [ 0.624855] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c7eecddb, max_idle_ns: 440795264679 ns [ 0.625214] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.13 BogoMIPS (lpj=2800066) [ 0.625467] pid_max: default: 32768 minimum: 301 [ 0.625665] Security Framework initialized [ 0.626156] SELinux: Initializing. [ 0.626357] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.626544] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.627141] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.627145] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.627302] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.627568] Spectre V2 : Mitigation: Full AMD retpoline [ 0.627716] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.628247] Freeing SMP alternatives memory: 36K [ 0.631346] cpu 0 spinlock event irq 57 [ 0.631536] VPMU disabled by hypervisor. [ 0.631863] Performance Events: PMU not available due to virtualization, using software events only. [ 0.632219] rcu: Hierarchical SRCU implementation. [ 0.632719] smp: Bringing up secondary CPUs ... [ 0.633048] installing Xen timer for CPU 1 [ 0.633617] cpu 1 spinlock event irq 69 [ 0.633617] installing Xen timer for CPU 2 [ 0.634487] cpu 2 spinlock event irq 76 [ 0.634487] installing Xen timer for CPU 3 [ 0.635431] cpu 3 spinlock event irq 83 [ 0.635431] installing Xen timer for CPU 4 [ 0.636357] cpu 4 spinlock event irq 90 [ 0.636487] installing Xen timer for CPU 5 [ 0.637559] cpu 5 spinlock event irq 97 [ 0.638167] installing Xen timer for CPU 6 [ 0.638818] cpu 6 spinlock event irq 104 [ 0.639303] installing Xen timer for CPU 7 [ 0.639758] cpu 7 spinlock event irq 111 [ 0.639758] smp: Brought up 1 node, 8 CPUs [ 0.640153] smpboot: Max logical packages: 1 [ 0.640586] devtmpfs: initialized [ 0.641193] x86/mm: Memory block size: 128MB [ 0.642207] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.642473] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.642897] RTC time: 7:25:55, date: 11/23/21 [ 0.643246] NET: Registered protocol family 16 [ 0.643451] xen:grant_table: Grant tables using version 1 layout [ 0.643683] Grant table initialized [ 0.644183] audit: initializing netlink subsys (disabled) [ 0.644359] audit: type=2000 audit(1637652355.960:1): state=initialized audit_enabled=0 res=1 [ 0.645152] node 0 link 1: io port [e000, ffff] [ 0.645152] TOM: 00000000c0000000 aka 3072M [ 0.645156] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.645162] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.645171] node 0 link 1: mmio [fec80000, fecbffff] [ 0.645176] TOM2: 0000000840000000 aka 33792M [ 0.645358] bus: [bus 00-3f] on node 0 link 1 [ 0.645362] bus: 00 [io 0x0000-0xffff] [ 0.645364] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.645365] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.645365] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.646284] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.646284] ACPI: bus type PCI registered [ 0.646620] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.646885] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.659349] PCI: Using configuration type 1 for base access [ 0.666281] random: fast init done [ 0.666366] ACPI: Added _OSI(Module Device) [ 0.666566] ACPI: Added _OSI(Processor Device) [ 0.666717] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.666873] ACPI: Added _OSI(Processor Aggregator Device) [ 0.667151] ACPI: Added _OSI(Linux-Dell-Video) [ 0.667151] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.671152] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.671691] xen: registering gsi 9 triggering 0 polarity 1 [ 0.672125] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.676051] ACPI: Interpreter enabled [ 0.676167] ACPI: (supports S0 S4 S5) [ 0.678200] ACPI: Using IOAPIC for interrupt routing [ 0.678373] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.678889] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.697324] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.697509] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.698508] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.698753] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.701143] PCI host bridge to bus 0000:00 [ 0.701148] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.701313] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.701469] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.701643] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.701828] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.701980] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.702146] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.702381] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.702619] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.702859] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.703141] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.703383] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.703560] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.704147] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.704281] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.704281] pci 0000:00:02.0: enabling Extended Tags [ 0.704461] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.704616] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.704687] pci 0000:00:09.0: enabling Extended Tags [ 0.704911] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.705186] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.705186] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.705186] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.705186] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.705186] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.705186] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.705188] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.705230] pci 0000:00:11.0: set SATA to AHCI mode [ 0.705556] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.705592] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.706224] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.706224] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.706224] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.706224] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.706254] pci 0000:00:12.2: supports D1 D2 [ 0.706255] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.706372] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.706408] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.706632] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.706668] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.707182] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.707182] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.707182] pci 0000:00:13.2: supports D1 D2 [ 0.707182] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.707212] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.707491] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.707532] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.707550] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.707567] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.707585] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.707602] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.708161] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.708180] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.708362] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.708442] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.708590] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.709143] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.709190] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.709277] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.709277] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.709407] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.709552] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.710143] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.710188] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.710188] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.710188] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.710188] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.710188] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.710188] pci 0000:01:00.0: enabling Extended Tags [ 0.710255] pci 0000:01:00.0: supports D1 D2 [ 0.710381] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.710541] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.710546] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.711146] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.711146] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.711146] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.711146] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.711242] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.711289] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.711502] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.712145] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.712145] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.712145] pci_bus 0000:03: extended config space not accessible [ 0.712190] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.712190] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.712190] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.712190] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.712458] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.712634] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.712640] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.712643] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.712645] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.712647] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.712648] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.712649] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.712651] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.712652] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.712653] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.712655] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.712656] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.712657] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.712697] pci_bus 0000:00: on NUMA node 0 [ 0.712836] xen: registering gsi 13 triggering 1 polarity 0 [ 0.714902] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.715186] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.715426] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.715670] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.715910] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.716175] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.716417] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.716655] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.716901] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.717140] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.717232] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.717467] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.717739] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.717980] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.718221] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.718475] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.718713] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.718954] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.719198] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.719451] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.719695] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.719945] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.720187] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.720438] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.720679] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.720922] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.721166] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.721405] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.721644] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.721924] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.722165] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.722395] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.722813] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.723098] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.723266] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.723552] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.723836] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.724121] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.724268] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.724554] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.725287] xen:balloon: Initialising balloon driver [ 0.726301] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.726428] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.726677] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.726677] vgaarb: loaded [ 0.727150] SCSI subsystem initialized [ 0.727356] libata version 3.00 loaded. [ 0.727356] ACPI: bus type USB registered [ 0.727424] usbcore: registered new interface driver usbfs [ 0.727424] usbcore: registered new interface driver hub [ 0.728227] usbcore: registered new device driver usb [ 0.728227] pps_core: LinuxPPS API ver. 1 registered [ 0.728227] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.729161] PTP clock support registered [ 0.729428] EDAC MC: Ver: 3.0.0 [ 0.730331] Advanced Linux Sound Architecture Driver Initialized. [ 0.730561] PCI: Using ACPI for IRQ routing [ 0.735234] PCI: pci_cache_line_size set to 64 bytes [ 0.735381] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.735541] Expanded resource Reserved due to conflict with Reserved [ 0.735728] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.735731] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.735962] NetLabel: Initializing [ 0.736110] NetLabel: domain hash size = 128 [ 0.736148] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.736323] NetLabel: unlabeled traffic allowed by default [ 0.736555] clocksource: Switched to clocksource tsc-early [ 0.751723] VFS: Disk quotas dquot_6.6.0 [ 0.751971] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.752181] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.752484] pnp: PnP ACPI init [ 0.752991] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.753033] xen: registering gsi 8 triggering 1 polarity 0 [ 0.753076] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.753460] xen: registering gsi 4 triggering 1 polarity 0 [ 0.753463] Already setup the GSI :4 [ 0.753713] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.754103] xen: registering gsi 3 triggering 1 polarity 0 [ 0.754208] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.755674] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.755856] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.756016] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.756182] system 00:04: [io 0x0dff] has been reserved [ 0.756334] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.756487] system 00:04: [io 0x0eff] has been reserved [ 0.756635] system 00:04: [io 0x040b] has been reserved [ 0.756819] system 00:04: [io 0x04d6] has been reserved [ 0.756972] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.757127] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.757318] system 00:04: [io 0x0c14] has been reserved [ 0.757472] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.757626] system 00:04: [io 0x0c6c] has been reserved [ 0.757776] system 00:04: [io 0x0c6f] has been reserved [ 0.757927] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.758104] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.758265] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.758420] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.758574] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.758742] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.758895] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.759046] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.759229] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.759383] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.759536] system 00:04: [io 0x0950] has been reserved [ 0.759706] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.759780] pnp 00:05: [irq 0 disabled] [ 0.759825] system 00:05: [io 0x0ca8] has been reserved [ 0.759986] system 00:05: [io 0x0cac] has been reserved [ 0.760161] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.761493] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.761689] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.761950] pnp: PnP ACPI: found 7 devices [ 0.777574] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.777853] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.778029] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.778197] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.778368] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.778527] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.778698] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.778884] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.779051] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.779328] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.779331] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.779332] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.779333] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.779334] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.779336] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.779337] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.779338] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.779340] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.779341] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.779342] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.779343] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.779345] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.779346] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.779348] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.779349] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.779351] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.779352] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.779353] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.779354] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.779355] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.779356] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.779358] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.779359] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.779360] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.779361] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.779362] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.779502] NET: Registered protocol family 2 [ 0.779933] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.780229] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.780410] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.780604] TCP: Hash tables configured (established 4096 bind 4096) [ 0.780849] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.781014] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.781298] NET: Registered protocol family 1 [ 0.782163] RPC: Registered named UNIX socket transport module. [ 0.782331] RPC: Registered udp transport module. [ 0.782507] RPC: Registered tcp transport module. [ 0.782657] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783424] xen: registering gsi 16 triggering 0 polarity 1 [ 0.783477] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.912437] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 126137 usecs [ 0.912774] xen: registering gsi 16 triggering 0 polarity 1 [ 0.912789] Already setup the GSI :16 [ 0.913095] xen: registering gsi 17 triggering 0 polarity 1 [ 0.913171] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.913318] xen: registering gsi 18 triggering 0 polarity 1 [ 0.913330] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.913473] xen: registering gsi 18 triggering 0 polarity 1 [ 0.913475] Already setup the GSI :18 [ 0.913754] xen: registering gsi 19 triggering 0 polarity 1 [ 0.913770] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.913945] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.914193] PCI: CLS 64 bytes, default 64 [ 0.914284] Unpacking initramfs... [ 1.349124] Freeing initrd memory: 27456K [ 1.349468] kvm: no hardware support [ 1.349614] has_svm: svm not available [ 1.349763] kvm: no hardware support [ 1.353208] Scanning for low memory corruption every 60 seconds [ 1.354668] Initialise system trusted keyrings [ 1.354936] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.357754] NFS: Registering the id_resolver key type [ 1.357917] Key type id_resolver registered [ 1.358068] Key type id_legacy registered [ 1.367323] Key type asymmetric registered [ 1.367492] Asymmetric key parser 'x509' registered [ 1.367766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.368004] io scheduler noop registered [ 1.368177] io scheduler deadline registered [ 1.368421] io scheduler cfq registered (default) [ 1.368573] io scheduler mq-deadline registered [ 1.368749] io scheduler kyber registered [ 1.369976] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.370186] xen: registering gsi 52 triggering 0 polarity 0 [ 1.370232] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.370601] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.370762] xen: registering gsi 53 triggering 0 polarity 0 [ 1.370779] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.371053] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.371301] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.371779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.372063] ACPI: Power Button [PWRF] [ 1.373031] Warning: Processor Platform Limit not supported. [ 1.373598] xen:xen_evtchn: Event-channel device installed [ 1.373952] xen_pciback: backend is vpci [ 1.375467] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.396964] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.398489] hpet_acpi_add: no address or irqs in _CRS [ 1.398841] Non-volatile memory driver v1.3 [ 1.399078] AMD IOMMUv2 driver by Joerg Roedel [ 1.399255] AMD IOMMUv2 functionality not available on this system [ 1.404860] loop: module loaded [ 1.412821] ahci 0000:00:11.0: version 3.0 [ 1.413001] xen: registering gsi 22 triggering 0 polarity 1 [ 1.413057] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.413269] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.413535] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.414787] scsi host0: ahci [ 1.415436] scsi host1: ahci [ 1.416010] scsi host2: ahci [ 1.416543] scsi host3: ahci [ 1.416927] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.417195] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.417435] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.417707] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.418289] tun: Universal TUN/TAP device driver, 1.6 [ 1.418603] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.418757] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.418967] sky2: driver version 1.30 [ 1.419200] xen_netfront: Initialising Xen virtual ethernet driver [ 1.419608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.419766] ehci-pci: EHCI PCI platform driver [ 1.420183] xen: registering gsi 17 triggering 0 polarity 1 [ 1.420193] Already setup the GSI :17 [ 1.420423] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.420711] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.420991] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.421288] ehci-pci 0000:00:12.2: debug port 1 [ 1.421603] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.429269] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.429560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.429829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.430066] usb usb1: Product: EHCI Host Controller [ 1.430228] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.430381] usb usb1: SerialNumber: 0000:00:12.2 [ 1.430889] hub 1-0:1.0: USB hub found [ 1.431075] hub 1-0:1.0: 6 ports detected [ 1.431705] xen: registering gsi 19 triggering 0 polarity 1 [ 1.431721] Already setup the GSI :19 [ 1.431957] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.432284] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.432530] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.432796] ehci-pci 0000:00:13.2: debug port 1 [ 1.433123] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.441281] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.441590] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.441871] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.442137] usb usb2: Product: EHCI Host Controller [ 1.442310] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.442464] usb usb2: SerialNumber: 0000:00:13.2 [ 1.443029] hub 2-0:1.0: USB hub found [ 1.443216] hub 2-0:1.0: 6 ports detected [ 1.443744] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.443927] ohci-pci: OHCI PCI platform driver [ 1.444265] xen: registering gsi 16 triggering 0 polarity 1 [ 1.444280] Already setup the GSI :16 [ 1.444501] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.444808] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.445192] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.502453] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.502759] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.503001] usb usb3: Product: OHCI PCI host controller [ 1.503190] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.503341] usb usb3: SerialNumber: 0000:00:12.0 [ 1.503874] hub 3-0:1.0: USB hub found [ 1.504031] hub 3-0:1.0: 3 ports detected [ 1.504589] xen: registering gsi 16 triggering 0 polarity 1 [ 1.504617] Already setup the GSI :16 [ 1.504840] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.505178] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.505513] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.562451] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.562752] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.563008] usb usb4: Product: OHCI PCI host controller [ 1.563179] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.563328] usb usb4: SerialNumber: 0000:00:12.1 [ 1.563868] hub 4-0:1.0: USB hub found [ 1.564030] hub 4-0:1.0: 3 ports detected [ 1.564572] xen: registering gsi 18 triggering 0 polarity 1 [ 1.564587] Already setup the GSI :18 [ 1.564832] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.565271] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.565694] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.621386] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.621719] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.621967] usb usb5: Product: OHCI PCI host controller [ 1.622135] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.622307] usb usb5: SerialNumber: 0000:00:13.0 [ 1.622970] hub 5-0:1.0: USB hub found [ 1.623132] hub 5-0:1.0: 3 ports detected [ 1.623701] xen: registering gsi 18 triggering 0 polarity 1 [ 1.623719] Already setup the GSI :18 [ 1.623948] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.624291] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.624620] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.680412] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.680705] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.680952] usb usb6: Product: OHCI PCI host controller [ 1.681101] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.681261] usb usb6: SerialNumber: 0000:00:13.1 [ 1.681824] hub 6-0:1.0: USB hub found [ 1.681983] hub 6-0:1.0: 3 ports detected [ 1.682406] uhci_hcd: USB Universal Host Controller Interface driver [ 1.682644] usbcore: registered new interface driver usblp [ 1.682867] usbcore: registered new interface driver usb-storage [ 1.683092] i8042: PNP: No PS/2 controller found. [ 1.683255] i8042: Probing ports directly. [ 1.686313] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.686600] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.687234] rtc_cmos 00:01: RTC can wake from S4 [ 1.687760] rtc_cmos 00:01: registered as rtc0 [ 1.687947] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.688348] device-mapper: uevent: version 1.0.3 [ 1.688730] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.689040] hidraw: raw HID events driver (C) Jiri Kosina [ 1.689494] usbcore: registered new interface driver usbhid [ 1.689645] usbhid: USB HID core driver [ 1.691704] Initializing XFRM netlink socket [ 1.692113] NET: Registered protocol family 10 [ 1.692728] Segment Routing with IPv6 [ 1.693845] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.694285] NET: Registered protocol family 17 [ 1.694459] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.694780] Key type dns_resolver registered [ 1.696085] mce: Using 2 MCE banks [ 1.696361] sched_clock: Marking stable (1667586160, 28704466)->(1701346689, -5056063) [ 1.698493] registered taskstats version 1 [ 1.698689] Loading compiled-in X.509 certificates [ 1.699411] Magic number: 13:873:420 [ 1.699973] console [netcon0] enabled [ 1.700120] netconsole: network logging started [ 1.700392] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.713164] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.713428] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.715184] cfg80211: failed to load regulatory.db [ 1.715369] ALSA device list: [ 1.715509] No soundcards found. [ 1.719381] ata3: SATA link down (SStatus 0 SControl 300) [ 1.720297] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.722376] ata2: SATA link down (SStatus 0 SControl 300) [ 1.723357] ata1: SATA link down (SStatus 0 SControl 300) [ 1.723601] ata4: SATA link down (SStatus 0 SControl 300) [ 1.725382] Freeing unused kernel image memory: 1344K [ 1.733316] Write protecting the kernel read-only data: 18432k [ 1.742656] Freeing unused kernel image memory: 1992K [ 1.744615] Freeing unused kernel image memory: 1444K [ 1.744792] Run /init as init process [ 1.849631] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.849924] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.850938] hub 1-3:1.0: USB hub found [ 1.851251] hub 1-3:1.0: 4 ports detected [ 1.962833] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.963271] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.963420] xen: registering gsi 48 triggering 0 polarity 0 [ 1.963448] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.964199] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.964629] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.964777] xen: registering gsi 49 triggering 0 polarity 0 [ 1.964793] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.965470] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.967697] mpt3sas version 26.100.00.00 loaded [ 1.968076] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.968828] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.968988] xen: registering gsi 24 triggering 0 polarity 0 [ 1.969064] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.969109] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 2.024783] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.025102] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 2.025679] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 2.025835] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x(____ptrval____)), size(65536) [ 2.026106] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.054217] random: crng init done [ 2.071906] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.072213] mpt2sas_cm0: sending diag reset !! [ 2.321338] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c7eecddb, max_idle_ns: 440795264679 ns [ 2.321865] clocksource: Switched to clocksource tsc [ 3.376024] mpt2sas_cm0: diag reset: SUCCESS [ 3.419941] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.420227] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.420477] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.468936] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.469273] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.469296] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.469829] mpt2sas_cm0: Protocol=( [ 3.469831] Initiator [ 3.469976] ,Target [ 3.470119] ), [ 3.470283] Capabilities=( [ 3.470460] Raid [ 3.470600] ,TLR [ 3.470737] ,EEDP [ 3.470875] ,Snapshot Buffer [ 3.471037] ,Diag Trace Buffer [ 3.471183] ,Task Set Full [ 3.471326] ,NCQ [ 3.471466] ) [ 3.471924] scsi host4: Fusion MPT SAS Host [ 3.488066] mpt2sas_cm0: sending port enable !! [ 5.051439] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 11.180223] mpt2sas_cm0: port enable: SUCCESS [ 11.182102] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.182355] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 11.182623] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 11.182882] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.184123] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.185452] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.262712] sd 4:0:0:0: [sda] Write Protect is off [ 11.262878] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.263463] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.337870] sda: sda1 sda2 < sda5 > [ 11.413798] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.251782] PM: Image not found (code -22) [ 12.666595] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.997472] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.409729] systemd-udevd[1525]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.734573] systemd-udevd[1541]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.734622] systemd-udevd[1538]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.767923] systemd-udevd[1538]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.768124] systemd-udevd[1541]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.775565] systemd-udevd[1537]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.775628] systemd-udevd[1536]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.781714] systemd-udevd[1537]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.782600] systemd-udevd[1536]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.811605] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.077858] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.141321] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.218644] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.837027] systemd-udevd[1541]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.842526] xenbr0: port 1(eth0) entered blocking state [ 17.842714] xenbr0: port 1(eth0) entered disabled state [ 17.842934] device eth0 entered promiscuous mode [ 17.942501] bnx2 0000:02:00.0 eth0: using MSIX [ 17.951062] xenbr0: port 1(eth0) entered blocking state [ 17.951260] xenbr0: port 1(eth0) entered forwarding state [ 17.951439] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready