[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nocera0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:57:12 UTC 2021 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031358] tsc: Fast TSC calibration using PIT [ 0.031363] tsc: Detected 2800.118 MHz processor [ 0.031365] tsc: Detected 2800.030 MHz TSC [ 0.053670] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053675] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053681] last_pfn = 0x20062 max_arch_pfn = 0x1000000 [ 0.053685] Disabled [ 0.053687] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053697] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053740] Scanning 1 areas for low memory corruption [ 0.053742] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.054064] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.202907] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.203044] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.203096] RAMDISK: [mem 0x04000000-0x0594afff] [ 0.203119] ACPI: Early table checksum verification disabled [ 0.217868] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.217880] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.217934] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.218047] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.218060] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.218071] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.218080] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.218093] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218104] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218116] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218127] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218138] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218151] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218164] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218175] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218187] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218198] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218209] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.218221] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.218233] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.218244] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218256] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.218292] ACPI: Local APIC address 0xfee00000 [ 0.218295] Switched to APIC driver `Xen PV'. [ 0.218340] 0MB HIGHMEM available. [ 0.218343] 512MB LOWMEM available. [ 0.218344] mapped low ram: 0 - 20062000 [ 0.218345] low ram: 0 - 20062000 [ 0.218351] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.218374] Zone ranges: [ 0.218376] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.218379] Normal [mem 0x0000000001000000-0x0000000020061fff] [ 0.218381] HighMem empty [ 0.218383] Movable zone start for each node [ 0.218384] Early memory node ranges [ 0.218385] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.218387] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.218390] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.218393] On node 0 totalpages: 131071 [ 0.220563] DMA zone: 32 pages used for memmap [ 0.220566] DMA zone: 0 pages reserved [ 0.220568] DMA zone: 3997 pages, LIFO batch:0 [ 0.220674] Normal zone: 993 pages used for memmap [ 0.220675] Normal zone: 127074 pages, LIFO batch:31 [ 0.223399] p2m virtual area at (ptrval), size is 400000 [ 0.223988] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.224931] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.226182] Remapped 98 page(s) [ 0.226188] Using APIC driver Xen PV [ 0.226626] ACPI: PM-Timer IO Port: 0x808 [ 0.226632] ACPI: Local APIC address 0xfee00000 [ 0.226633] Switched to APIC driver `Xen PV'. [ 0.226817] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.226877] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.226885] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.226924] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.226932] ACPI: IRQ0 used by override. [ 0.226933] ACPI: IRQ9 used by override. [ 0.226968] Using ACPI (MADT) for SMP configuration information [ 0.226972] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.226980] ACPI: SPCR: SPCR table version 1 [ 0.226985] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.226995] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.227019] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.227021] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.227022] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.227026] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.227031] Booting paravirtualized kernel on Xen [ 0.227033] Xen version: 4.16-rc (preserve-AD) [ 0.227040] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.227061] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.227071] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.227754] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.227761] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.227763] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.227871] xen: PV spinlocks enabled [ 0.227877] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.227886] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.227889] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.228173] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.228244] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.228326] Initializing CPU#0 [ 0.318918] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.318931] Initializing HighMem for node 0 (00000000:00000000) [ 0.322080] Memory: 411488K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 112796K reserved, 0K cma-reserved, 0K highmem) [ 0.322088] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0862000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0062000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.322094] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.322231] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.322447] rcu: Hierarchical RCU implementation. [ 0.322449] rcu: RCU event tracing is enabled. [ 0.322773] Using NULL legacy PIC [ 0.322775] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.322848] xen:events: Using FIFO-based ABI [ 0.322865] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.322908] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.322912] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.322916] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.322920] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.322924] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.322928] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.322932] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.322936] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.322940] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.322944] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.322952] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.322956] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.322960] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.322964] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.322968] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.329881] Console: colour VGA+ 80x25 [ 0.349598] console [tty0] enabled [ 0.350178] console [hvc0] enabled [ 0.350351] ACPI: Core revision 20180810 [ 0.357292] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.357586] Xen: using vcpuop timer interface [ 0.357595] installing Xen timer for CPU 0 [ 0.357860] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c5d1eb9c, max_idle_ns: 440795334678 ns [ 0.358203] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.06 BogoMIPS (lpj=2800030) [ 0.358512] pid_max: default: 32768 minimum: 301 [ 0.358706] Security Framework initialized [ 0.359172] SELinux: Initializing. [ 0.359367] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.359545] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.360074] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.360161] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.360336] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.360613] Spectre V2 : Mitigation: Full AMD retpoline [ 0.360780] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.361348] Freeing SMP alternatives memory: 36K [ 0.364381] cpu 0 spinlock event irq 57 [ 0.364562] VPMU disabled by hypervisor. [ 0.364917] Performance Events: PMU not available due to virtualization, using software events only. [ 0.365251] rcu: Hierarchical SRCU implementation. [ 0.365668] smp: Bringing up secondary CPUs ... [ 0.365962] installing Xen timer for CPU 1 [ 0.366187] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036176] Initializing CPU#1 [ 0.366573] cpu 1 spinlock event irq 69 [ 0.367324] installing Xen timer for CPU 2 [ 0.367594] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036176] Initializing CPU#2 [ 0.367915] cpu 2 spinlock event irq 76 [ 0.368276] installing Xen timer for CPU 3 [ 0.368512] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036176] Initializing CPU#3 [ 0.368743] cpu 3 spinlock event irq 83 [ 0.369276] installing Xen timer for CPU 4 [ 0.369505] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036176] Initializing CPU#4 [ 0.370238] cpu 4 spinlock event irq 90 [ 0.370599] installing Xen timer for CPU 5 [ 0.370599] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036176] Initializing CPU#5 [ 0.371286] cpu 5 spinlock event irq 97 [ 0.371573] installing Xen timer for CPU 6 [ 0.371573] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036176] Initializing CPU#6 [ 0.372438] cpu 6 spinlock event irq 104 [ 0.373173] installing Xen timer for CPU 7 [ 0.373402] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036176] Initializing CPU#7 [ 0.373652] cpu 7 spinlock event irq 111 [ 0.374184] smp: Brought up 1 node, 8 CPUs [ 0.374362] smpboot: Max logical packages: 1 [ 0.374737] devtmpfs: initialized [ 0.376180] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.376466] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.376945] RTC time: 13:20:43, date: 11/23/21 [ 0.377296] NET: Registered protocol family 16 [ 0.377498] xen:grant_table: Grant tables using version 1 layout [ 0.377732] Grant table initialized [ 0.378541] audit: initializing netlink subsys (disabled) [ 0.378759] audit: type=2000 audit(1637673643.135:1): state=initialized audit_enabled=0 res=1 [ 0.379320] node 0 link 1: io port [e000, ffff] [ 0.379334] TOM: 00000000c0000000 aka 3072M [ 0.379517] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.379523] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.379533] node 0 link 1: mmio [fec80000, fecbffff] [ 0.379537] TOM2: 0000000840000000 aka 33792M [ 0.379713] bus: [bus 00-3f] on node 0 link 1 [ 0.379715] bus: 00 [io 0x0000-0xffff] [ 0.379717] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.379718] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.379719] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.380308] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.380596] ACPI: bus type PCI registered [ 0.381226] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.381226] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.381226] PCI: Using MMCONFIG for extended config space [ 0.381226] PCI: Using configuration type 1 for base access [ 0.385296] random: fast init done [ 0.387362] ACPI: Added _OSI(Module Device) [ 0.387550] ACPI: Added _OSI(Processor Device) [ 0.387748] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.388163] ACPI: Added _OSI(Processor Aggregator Device) [ 0.388361] ACPI: Added _OSI(Linux-Dell-Video) [ 0.388533] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.391764] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.392157] xen: registering gsi 9 triggering 0 polarity 1 [ 0.392157] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.396803] ACPI: Interpreter enabled [ 0.397024] ACPI: (supports S0 S4 S5) [ 0.397174] ACPI: Using IOAPIC for interrupt routing [ 0.398162] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.398162] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.417298] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.417526] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.418564] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.418864] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.421371] PCI host bridge to bus 0000:00 [ 0.421543] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.421718] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.421892] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.422064] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.422162] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.422365] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.422674] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.422956] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.423162] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.423465] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.423735] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.424045] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.424197] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.424578] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.424847] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.424922] pci 0000:00:02.0: enabling Extended Tags [ 0.425181] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.425337] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.425410] pci 0000:00:09.0: enabling Extended Tags [ 0.425653] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.425802] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.425848] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.425868] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.425887] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.425906] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.425925] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.425944] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.425988] pci 0000:00:11.0: set SATA to AHCI mode [ 0.426323] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.426360] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.426576] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.426612] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.426825] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.426870] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.427063] pci 0000:00:12.2: supports D1 D2 [ 0.427065] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.427189] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.427225] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.427442] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.427479] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.427691] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.427735] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.427907] pci 0000:00:13.2: supports D1 D2 [ 0.427909] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.428161] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.428347] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.428389] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.428408] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.428427] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.428446] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.428465] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.428649] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.428903] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.429190] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.429318] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.429475] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.429626] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.429796] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.430187] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.430187] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.430315] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.430477] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.430651] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.431183] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.431183] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.431183] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.431183] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.431183] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.431183] pci 0000:01:00.0: enabling Extended Tags [ 0.431274] pci 0000:01:00.0: supports D1 D2 [ 0.431413] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.431592] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.431597] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.431712] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.431789] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.432034] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.432097] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.432267] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.432319] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.432540] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.432712] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.432915] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.432945] pci_bus 0000:03: extended config space not accessible [ 0.433186] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.433224] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.433245] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.433267] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.433549] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.433736] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.433743] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.433745] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.433747] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.433748] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.433750] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.433751] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.433753] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.433754] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.433755] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.433757] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.433758] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.433759] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.433799] pci_bus 0000:00: on NUMA node 0 [ 0.433928] xen: registering gsi 13 triggering 1 polarity 0 [ 0.436033] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.436259] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.436538] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.436803] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.437077] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.437250] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.437535] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.437795] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.438054] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.438254] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.438518] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.438794] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.439060] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.439260] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.439530] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.439818] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.440084] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.440257] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.440522] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.440788] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.441053] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.441262] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.441526] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.441787] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.442078] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.442244] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.442512] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.442777] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.443040] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.444263] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.444524] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.444817] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.445266] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.445578] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.445877] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.445877] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.445877] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.445885] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.446196] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.446540] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.447236] xen:balloon: Initialising balloon driver [ 0.448249] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.448411] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.448717] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.449193] vgaarb: loaded [ 0.449503] SCSI subsystem initialized [ 0.449732] libata version 3.00 loaded. [ 0.449732] ACPI: bus type USB registered [ 0.450184] usbcore: registered new interface driver usbfs [ 0.450357] usbcore: registered new interface driver hub [ 0.450638] usbcore: registered new device driver usb [ 0.450851] pps_core: LinuxPPS API ver. 1 registered [ 0.451020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.451182] PTP clock support registered [ 0.451433] EDAC MC: Ver: 3.0.0 [ 0.452344] Advanced Linux Sound Architecture Driver Initialized. [ 0.452344] PCI: Using ACPI for IRQ routing [ 0.457119] PCI: pci_cache_line_size set to 64 bytes [ 0.457273] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.457448] Expanded resource Reserved due to conflict with Reserved [ 0.457624] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.457626] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.457906] NetLabel: Initializing [ 0.458098] NetLabel: domain hash size = 128 [ 0.458161] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.458360] NetLabel: unlabeled traffic allowed by default [ 0.459227] clocksource: Switched to clocksource tsc-early [ 0.473776] VFS: Disk quotas dquot_6.6.0 [ 0.474023] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.474271] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.474619] pnp: PnP ACPI init [ 0.475089] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.475125] xen: registering gsi 8 triggering 1 polarity 0 [ 0.475183] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.475630] xen: registering gsi 4 triggering 1 polarity 0 [ 0.475632] Already setup the GSI :4 [ 0.475913] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.476308] xen: registering gsi 3 triggering 1 polarity 0 [ 0.476409] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.477958] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.478141] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.478323] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.478499] system 00:04: [io 0x0dff] has been reserved [ 0.478678] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.478889] system 00:04: [io 0x0eff] has been reserved [ 0.479087] system 00:04: [io 0x040b] has been reserved [ 0.479264] system 00:04: [io 0x04d6] has been reserved [ 0.479438] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.479612] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.479786] system 00:04: [io 0x0c14] has been reserved [ 0.479955] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.480130] system 00:04: [io 0x0c6c] has been reserved [ 0.480355] system 00:04: [io 0x0c6f] has been reserved [ 0.480527] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.480701] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.480875] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.481050] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.481224] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.481423] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.481630] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.481803] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.481977] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.482156] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.482341] system 00:04: [io 0x0950] has been reserved [ 0.482529] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.482614] pnp 00:05: [irq 0 disabled] [ 0.482666] system 00:05: [io 0x0ca8] has been reserved [ 0.482844] system 00:05: [io 0x0cac] has been reserved [ 0.483054] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.484492] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.484684] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.484997] pnp: PnP ACPI: found 7 devices [ 0.498401] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.498744] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.498917] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.499097] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.499296] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.499471] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.499692] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.499891] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.500071] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.500364] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.500366] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.500367] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.500369] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.500370] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.500372] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.500373] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.500374] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.500376] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.500377] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.500378] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.500380] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.500381] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.500383] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.500384] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.500386] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.500387] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.500388] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.500390] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.500391] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.500392] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.500393] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.500395] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.500396] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.500397] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.500399] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.500400] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.500515] NET: Registered protocol family 2 [ 0.500927] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.501253] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.501445] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.501646] TCP: Hash tables configured (established 4096 bind 4096) [ 0.504106] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.504294] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.504529] NET: Registered protocol family 1 [ 0.505384] RPC: Registered named UNIX socket transport module. [ 0.505559] RPC: Registered udp transport module. [ 0.505728] RPC: Registered tcp transport module. [ 0.505923] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.506462] xen: registering gsi 16 triggering 0 polarity 1 [ 0.506512] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.635488] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 126106 usecs [ 0.635868] xen: registering gsi 16 triggering 0 polarity 1 [ 0.635883] Already setup the GSI :16 [ 0.636240] xen: registering gsi 17 triggering 0 polarity 1 [ 0.636300] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.636481] xen: registering gsi 18 triggering 0 polarity 1 [ 0.636493] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.636677] xen: registering gsi 18 triggering 0 polarity 1 [ 0.636679] Already setup the GSI :18 [ 0.636997] xen: registering gsi 19 triggering 0 polarity 1 [ 0.637019] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.637210] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.637491] PCI: CLS 64 bytes, default 64 [ 0.637594] Unpacking initramfs... [ 1.062229] Freeing initrd memory: 25900K [ 1.062611] kvm: no hardware support [ 1.062782] has_svm: svm not available [ 1.062969] kvm: no hardware support [ 1.066077] Scanning for low memory corruption every 60 seconds [ 1.067711] Initialise system trusted keyrings [ 1.068000] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.070465] NFS: Registering the id_resolver key type [ 1.070646] Key type id_resolver registered [ 1.070814] Key type id_legacy registered [ 1.076689] Key type asymmetric registered [ 1.076884] Asymmetric key parser 'x509' registered [ 1.077095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.077415] io scheduler noop registered [ 1.077607] io scheduler deadline registered [ 1.077885] io scheduler cfq registered (default) [ 1.078064] io scheduler mq-deadline registered [ 1.078236] io scheduler kyber registered [ 1.079183] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.079356] xen: registering gsi 52 triggering 0 polarity 0 [ 1.079401] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.079812] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.080015] xen: registering gsi 53 triggering 0 polarity 0 [ 1.080030] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.080295] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.080514] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.080923] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.081249] ACPI: Power Button [PWRF] [ 1.082099] Warning: Processor Platform Limit not supported. [ 1.082724] xen:xen_evtchn: Event-channel device installed [ 1.083038] xen_pciback: backend is vpci [ 1.083913] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.105343] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.106886] hpet_acpi_add: no address or irqs in _CRS [ 1.107251] Non-volatile memory driver v1.3 [ 1.111809] loop: module loaded [ 1.118107] ahci 0000:00:11.0: version 3.0 [ 1.118300] xen: registering gsi 22 triggering 0 polarity 1 [ 1.118350] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.118524] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.118826] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.120100] scsi host0: ahci [ 1.120641] scsi host1: ahci [ 1.121151] scsi host2: ahci [ 1.121725] scsi host3: ahci [ 1.122025] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.122312] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.122586] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.122891] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.123492] tun: Universal TUN/TAP device driver, 1.6 [ 1.123820] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.124020] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.124226] sky2: driver version 1.30 [ 1.124480] xen_netfront: Initialising Xen virtual ethernet driver [ 1.124903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.125072] ehci-pci: EHCI PCI platform driver [ 1.125452] xen: registering gsi 17 triggering 0 polarity 1 [ 1.125465] Already setup the GSI :17 [ 1.125744] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.126051] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.126360] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.126679] ehci-pci 0000:00:12.2: debug port 1 [ 1.127041] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.134242] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.134505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.134779] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.135080] usb usb1: Product: EHCI Host Controller [ 1.135275] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.135442] usb usb1: SerialNumber: 0000:00:12.2 [ 1.136031] hub 1-0:1.0: USB hub found [ 1.136243] hub 1-0:1.0: 6 ports detected [ 1.136780] xen: registering gsi 19 triggering 0 polarity 1 [ 1.136793] Already setup the GSI :19 [ 1.137073] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.137370] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.137654] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.137958] ehci-pci 0000:00:13.2: debug port 1 [ 1.138289] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.145229] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.145515] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.145794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.146094] usb usb2: Product: EHCI Host Controller [ 1.146273] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.146443] usb usb2: SerialNumber: 0000:00:13.2 [ 1.147021] hub 2-0:1.0: USB hub found [ 1.147234] hub 2-0:1.0: 6 ports detected [ 1.147655] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.147854] ohci-pci: OHCI PCI platform driver [ 1.148241] xen: registering gsi 16 triggering 0 polarity 1 [ 1.148254] Already setup the GSI :16 [ 1.148507] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.148874] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.149296] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.205358] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.205679] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.205985] usb usb3: Product: OHCI PCI host controller [ 1.206153] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.206373] usb usb3: SerialNumber: 0000:00:12.0 [ 1.206884] hub 3-0:1.0: USB hub found [ 1.207083] hub 3-0:1.0: 3 ports detected [ 1.207536] xen: registering gsi 16 triggering 0 polarity 1 [ 1.207550] Already setup the GSI :16 [ 1.207808] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.208177] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.208568] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.264350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.264713] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.264990] usb usb4: Product: OHCI PCI host controller [ 1.265156] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.265338] usb usb4: SerialNumber: 0000:00:12.1 [ 1.265852] hub 4-0:1.0: USB hub found [ 1.266033] hub 4-0:1.0: 3 ports detected [ 1.266537] xen: registering gsi 18 triggering 0 polarity 1 [ 1.266551] Already setup the GSI :18 [ 1.266777] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.267116] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.267572] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.323341] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.323669] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.323950] usb usb5: Product: OHCI PCI host controller [ 1.324138] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.324351] usb usb5: SerialNumber: 0000:00:13.0 [ 1.324863] hub 5-0:1.0: USB hub found [ 1.325035] hub 5-0:1.0: 3 ports detected [ 1.325530] xen: registering gsi 18 triggering 0 polarity 1 [ 1.325543] Already setup the GSI :18 [ 1.325768] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.326119] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.326487] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.383338] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.383667] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.383963] usb usb6: Product: OHCI PCI host controller [ 1.384155] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.384337] usb usb6: SerialNumber: 0000:00:13.1 [ 1.384898] hub 6-0:1.0: USB hub found [ 1.385079] hub 6-0:1.0: 3 ports detected [ 1.385471] uhci_hcd: USB Universal Host Controller Interface driver [ 1.385721] usbcore: registered new interface driver usblp [ 1.385927] usbcore: registered new interface driver usb-storage [ 1.386145] i8042: PNP: No PS/2 controller found. [ 1.386328] i8042: Probing ports directly. [ 1.389530] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.389751] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.390260] rtc_cmos 00:01: RTC can wake from S4 [ 1.390772] rtc_cmos 00:01: registered as rtc0 [ 1.390972] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.391289] device-mapper: uevent: version 1.0.3 [ 1.391639] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.391975] hidraw: raw HID events driver (C) Jiri Kosina [ 1.392532] usbcore: registered new interface driver usbhid [ 1.394721] usbhid: USB HID core driver [ 1.396365] Initializing XFRM netlink socket [ 1.396751] NET: Registered protocol family 10 [ 1.397353] Segment Routing with IPv6 [ 1.398149] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.398525] NET: Registered protocol family 17 [ 1.398737] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.399123] Key type dns_resolver registered [ 1.400398] mce: Using 2 MCE banks [ 1.400600] Using IPI No-Shortcut mode [ 1.400788] sched_clock: Marking stable (1365131903, 35176392)->(1405735636, -5427341) [ 1.402321] registered taskstats version 1 [ 1.402518] Loading compiled-in X.509 certificates [ 1.403094] Magic number: 13:409:332 [ 1.403397] tty tty53: hash matches [ 1.403748] console [netcon0] enabled [ 1.403909] netconsole: network logging started [ 1.404166] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.414087] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.414401] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.414713] cfg80211: failed to load regulatory.db [ 1.414922] ALSA device list: [ 1.415082] No soundcards found. [ 1.431455] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.434348] ata3: SATA link down (SStatus 0 SControl 300) [ 1.435416] ata4: SATA link down (SStatus 0 SControl 300) [ 1.435664] ata1: SATA link down (SStatus 0 SControl 300) [ 1.435904] ata2: SATA link down (SStatus 0 SControl 300) [ 1.436954] Freeing unused kernel image memory: 840K [ 1.444197] Write protecting the kernel text: 9000k [ 1.445052] Write protecting the kernel read-only data: 2360k [ 1.445259] NX-protecting the kernel data: 5336k [ 1.446168] Run /init as init process [ 1.561477] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.561802] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.562824] hub 1-3:1.0: USB hub found [ 1.563083] hub 1-3:1.0: 4 ports detected [ 1.606277] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.606817] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.607000] xen: registering gsi 48 triggering 0 polarity 0 [ 1.607048] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.607792] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.608312] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.608501] xen: registering gsi 49 triggering 0 polarity 0 [ 1.608524] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.609174] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.610924] mpt3sas version 26.100.00.00 loaded [ 1.611262] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.612136] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.612344] xen: registering gsi 24 triggering 0 polarity 0 [ 1.612405] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.612452] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.624236] random: crng init done [ 1.651338] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.651705] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.652213] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.652382] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x3f32c91b), size(65536) [ 1.652654] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 1.704649] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.704962] mpt2sas_cm0: sending diag reset !! [ 2.053311] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c5d1eb9c, max_idle_ns: 440795334678 ns [ 2.053868] clocksource: Switched to clocksource tsc [ 3.011442] mpt2sas_cm0: diag reset: SUCCESS [ 3.056610] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.056876] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.057156] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.095566] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.095962] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.096252] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.096536] mpt2sas_cm0: Protocol=( [ 3.096537] Initiator [ 3.096703] ,Target [ 3.096886] ), [ 3.097048] Capabilities=( [ 3.097252] Raid [ 3.097412] ,TLR [ 3.097568] ,EEDP [ 3.097723] ,Snapshot Buffer [ 3.097878] ,Diag Trace Buffer [ 3.098066] ,Task Set Full [ 3.098232] ,NCQ [ 3.098391] ) [ 3.098816] scsi host4: Fusion MPT SAS Host [ 3.110420] mpt2sas_cm0: sending port enable !! [ 4.687284] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 10.814240] mpt2sas_cm0: port enable: SUCCESS [ 10.815973] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 10.816259] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 10.816539] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 10.816792] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 10.818090] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 10.819414] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.904217] sd 4:0:0:0: [sda] Write Protect is off [ 10.904423] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 10.905018] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.984889] sda: sda1 sda2 < sda5 > [ 11.060849] sd 4:0:0:0: [sda] Attached SCSI disk [ 11.847696] PM: Image not found (code -22) [ 12.250192] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.569521] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.918426] systemd-udevd[1517]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.182120] systemd-udevd[1535]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.182178] systemd-udevd[1536]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.188449] systemd-udevd[1536]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.188528] systemd-udevd[1535]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.203678] systemd-udevd[1527]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.203730] systemd-udevd[1532]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.208929] systemd-udevd[1527]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.209766] systemd-udevd[1532]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.667008] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.858256] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.921686] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.991049] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.588377] systemd-udevd[1530]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.592746] xenbr0: port 1(eth0) entered blocking state [ 17.592935] xenbr0: port 1(eth0) entered disabled state [ 17.593166] device eth0 entered promiscuous mode [ 17.687531] bnx2 0000:02:00.0 eth0: using MSIX [ 17.694455] xenbr0: port 1(eth0) entered blocking state [ 17.694671] xenbr0: port 1(eth0) entered forwarding state [ 17.694855] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready