[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nocera0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:57:12 UTC 2021 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031785] tsc: Fast TSC calibration using PIT [ 0.031789] tsc: Detected 2800.028 MHz processor [ 0.031791] tsc: Detected 2800.082 MHz TSC [ 0.054754] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.054759] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.054765] last_pfn = 0x20062 max_arch_pfn = 0x1000000 [ 0.054769] Disabled [ 0.054771] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.054780] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.054824] Scanning 1 areas for low memory corruption [ 0.054826] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.055180] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.204381] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.204520] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.204568] RAMDISK: [mem 0x04000000-0x0594bfff] [ 0.204591] ACPI: Early table checksum verification disabled [ 0.219330] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.219342] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219396] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.219511] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.219524] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.219535] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.219545] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.219558] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219570] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219582] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219594] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219605] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219617] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219629] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219641] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219653] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219664] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219677] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.219690] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.219702] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.219714] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219726] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.219766] ACPI: Local APIC address 0xfee00000 [ 0.219768] Switched to APIC driver `Xen PV'. [ 0.219814] 0MB HIGHMEM available. [ 0.219817] 512MB LOWMEM available. [ 0.219819] mapped low ram: 0 - 20062000 [ 0.219820] low ram: 0 - 20062000 [ 0.219826] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.219848] Zone ranges: [ 0.219850] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.219852] Normal [mem 0x0000000001000000-0x0000000020061fff] [ 0.219854] HighMem empty [ 0.219856] Movable zone start for each node [ 0.219857] Early memory node ranges [ 0.219858] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.219860] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.219863] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.219866] On node 0 totalpages: 131071 [ 0.222044] DMA zone: 32 pages used for memmap [ 0.222047] DMA zone: 0 pages reserved [ 0.222048] DMA zone: 3997 pages, LIFO batch:0 [ 0.222151] Normal zone: 993 pages used for memmap [ 0.222152] Normal zone: 127074 pages, LIFO batch:31 [ 0.225001] p2m virtual area at (ptrval), size is 400000 [ 0.225585] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.226499] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.227755] Remapped 98 page(s) [ 0.227759] Using APIC driver Xen PV [ 0.228169] ACPI: PM-Timer IO Port: 0x808 [ 0.228175] ACPI: Local APIC address 0xfee00000 [ 0.228176] Switched to APIC driver `Xen PV'. [ 0.228360] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.228419] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.228427] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.228464] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.228472] ACPI: IRQ0 used by override. [ 0.228473] ACPI: IRQ9 used by override. [ 0.228506] Using ACPI (MADT) for SMP configuration information [ 0.228511] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.228518] ACPI: SPCR: SPCR table version 1 [ 0.228523] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.228533] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.228558] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.228560] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.228561] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.228565] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.228570] Booting paravirtualized kernel on Xen [ 0.228572] Xen version: 4.16-rc (preserve-AD) [ 0.228578] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.228600] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.228610] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229292] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.229300] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.229301] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.229413] xen: PV spinlocks enabled [ 0.229419] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.229427] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.229431] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.229717] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.229791] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.229874] Initializing CPU#0 [ 0.320648] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.320661] Initializing HighMem for node 0 (00000000:00000000) [ 0.323872] Memory: 411484K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 112800K reserved, 0K cma-reserved, 0K highmem) [ 0.323879] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0862000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0062000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.323884] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.324019] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.324230] rcu: Hierarchical RCU implementation. [ 0.324232] rcu: RCU event tracing is enabled. [ 0.324550] Using NULL legacy PIC [ 0.324553] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.324629] xen:events: Using FIFO-based ABI [ 0.324646] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.324689] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.324694] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.324698] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.324702] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.324706] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.324710] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.324714] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.324717] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.324721] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.324726] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.324733] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.324738] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.324742] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.324745] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.324750] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.331660] Console: colour VGA+ 80x25 [ 0.351364] console [tty0] enabled [ 0.351957] console [hvc0] enabled [ 0.352132] ACPI: Core revision 20180810 [ 0.359216] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.359511] Xen: using vcpuop timer interface [ 0.359520] installing Xen timer for CPU 0 [ 0.359784] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c8e6fa9d, max_idle_ns: 440795287020 ns [ 0.360163] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.16 BogoMIPS (lpj=2800082) [ 0.360480] pid_max: default: 32768 minimum: 301 [ 0.360673] Security Framework initialized [ 0.361132] SELinux: Initializing. [ 0.361326] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.361505] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.362071] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.362121] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.362296] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.362576] Spectre V2 : Mitigation: Full AMD retpoline [ 0.362745] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.363368] Freeing SMP alternatives memory: 36K [ 0.366337] cpu 0 spinlock event irq 57 [ 0.366517] VPMU disabled by hypervisor. [ 0.366869] Performance Events: PMU not available due to virtualization, using software events only. [ 0.367212] rcu: Hierarchical SRCU implementation. [ 0.367658] smp: Bringing up secondary CPUs ... [ 0.367945] installing Xen timer for CPU 1 [ 0.368190] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036354] Initializing CPU#1 [ 0.368586] cpu 1 spinlock event irq 69 [ 0.369241] installing Xen timer for CPU 2 [ 0.369455] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036354] Initializing CPU#2 [ 0.369725] cpu 2 spinlock event irq 76 [ 0.370251] installing Xen timer for CPU 3 [ 0.370473] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036354] Initializing CPU#3 [ 0.370700] cpu 3 spinlock event irq 83 [ 0.371282] installing Xen timer for CPU 4 [ 0.371522] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036354] Initializing CPU#4 [ 0.371811] cpu 4 spinlock event irq 90 [ 0.372227] installing Xen timer for CPU 5 [ 0.372504] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036354] Initializing CPU#5 [ 0.373209] cpu 5 spinlock event irq 97 [ 0.373564] installing Xen timer for CPU 6 [ 0.373564] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036354] Initializing CPU#6 [ 0.374359] cpu 6 spinlock event irq 104 [ 0.374598] installing Xen timer for CPU 7 [ 0.375186] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036354] Initializing CPU#7 [ 0.375430] cpu 7 spinlock event irq 111 [ 0.375548] smp: Brought up 1 node, 8 CPUs [ 0.376125] smpboot: Max logical packages: 1 [ 0.376532] devtmpfs: initialized [ 0.377656] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.378132] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.378614] RTC time: 14:14:49, date: 11/23/21 [ 0.378986] NET: Registered protocol family 16 [ 0.379152] xen:grant_table: Grant tables using version 1 layout [ 0.379407] Grant table initialized [ 0.380534] audit: initializing netlink subsys (disabled) [ 0.380748] audit: type=2000 audit(1637676889.303:1): state=initialized audit_enabled=0 res=1 [ 0.381240] node 0 link 1: io port [e000, ffff] [ 0.381252] TOM: 00000000c0000000 aka 3072M [ 0.381434] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.381440] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.381450] node 0 link 1: mmio [fec80000, fecbffff] [ 0.381455] TOM2: 0000000840000000 aka 33792M [ 0.381623] bus: [bus 00-3f] on node 0 link 1 [ 0.381624] bus: 00 [io 0x0000-0xffff] [ 0.381626] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.381626] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.381627] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.382238] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.382516] ACPI: bus type PCI registered [ 0.382982] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.383127] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.383307] PCI: Using MMCONFIG for extended config space [ 0.383478] PCI: Using configuration type 1 for base access [ 0.387880] random: fast init done [ 0.389178] ACPI: Added _OSI(Module Device) [ 0.389351] ACPI: Added _OSI(Processor Device) [ 0.389515] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.389688] ACPI: Added _OSI(Processor Aggregator Device) [ 0.389903] ACPI: Added _OSI(Linux-Dell-Video) [ 0.390094] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.394752] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.395342] xen: registering gsi 9 triggering 0 polarity 1 [ 0.395832] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.400535] ACPI: Interpreter enabled [ 0.400796] ACPI: (supports S0 S4 S5) [ 0.400961] ACPI: Using IOAPIC for interrupt routing [ 0.401198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.401766] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.422955] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.423130] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.424330] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.424605] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.427401] PCI host bridge to bus 0000:00 [ 0.427566] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.427739] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.427914] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.428121] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.428323] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.428496] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.428775] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.429050] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.429121] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.429432] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.429705] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.429981] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.430151] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.430559] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.430819] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.430896] pci 0000:00:02.0: enabling Extended Tags [ 0.431159] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.431326] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.431403] pci 0000:00:09.0: enabling Extended Tags [ 0.431676] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.431864] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.431910] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.431931] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.431950] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.431968] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.431987] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.432006] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.432051] pci 0000:00:11.0: set SATA to AHCI mode [ 0.432285] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.432323] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.432538] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.432576] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.432817] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.432862] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.433034] pci 0000:00:12.2: supports D1 D2 [ 0.433036] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.433201] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.433238] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.433452] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.433490] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.433712] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.433758] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.433929] pci 0000:00:13.2: supports D1 D2 [ 0.433931] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.434061] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.434360] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.434403] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.434423] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.434441] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.434499] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.434517] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.434709] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.434991] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.435223] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.435424] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.435587] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.435745] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.435966] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.436139] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.436344] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.436499] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.436654] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.436827] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.437087] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.437125] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.437150] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.437175] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.437244] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.437258] pci 0000:01:00.0: enabling Extended Tags [ 0.437547] pci 0000:01:00.0: supports D1 D2 [ 0.437693] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.437868] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.437873] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.437988] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.438042] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.438272] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.438337] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.438779] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.438858] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.439084] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.439265] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.439445] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.439475] pci_bus 0000:03: extended config space not accessible [ 0.439702] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.439741] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.439763] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.439785] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.440135] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.440321] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.440327] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.440330] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.440331] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.440333] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.440334] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.440336] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.440337] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.440338] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.440340] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.440341] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.440342] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.440344] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.440385] pci_bus 0000:00: on NUMA node 0 [ 0.440510] xen: registering gsi 13 triggering 1 polarity 0 [ 0.442754] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.443069] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.443219] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.443498] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.443781] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.444099] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.444222] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.444497] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.444800] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.445076] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.445225] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.445500] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.445809] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.446083] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.446224] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.446541] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.446844] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.447124] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.447413] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.447734] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.448037] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.448232] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.448510] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.448789] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.449100] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.449222] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.449501] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.449775] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.450064] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.450226] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.450509] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.450794] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.451276] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.451642] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.451963] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.452257] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.452607] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.452969] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.453262] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.453597] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.454155] xen:balloon: Initialising balloon driver [ 0.454470] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.454470] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.454644] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.455129] vgaarb: loaded [ 0.455467] SCSI subsystem initialized [ 0.455712] libata version 3.00 loaded. [ 0.455712] ACPI: bus type USB registered [ 0.455712] usbcore: registered new interface driver usbfs [ 0.456144] usbcore: registered new interface driver hub [ 0.456406] usbcore: registered new device driver usb [ 0.456642] pps_core: LinuxPPS API ver. 1 registered [ 0.456811] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.457131] PTP clock support registered [ 0.457392] EDAC MC: Ver: 3.0.0 [ 0.457530] Advanced Linux Sound Architecture Driver Initialized. [ 0.458161] PCI: Using ACPI for IRQ routing [ 0.463140] PCI: pci_cache_line_size set to 64 bytes [ 0.463326] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.463505] Expanded resource Reserved due to conflict with Reserved [ 0.463676] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.463678] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.463905] NetLabel: Initializing [ 0.464097] NetLabel: domain hash size = 128 [ 0.464120] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.464312] NetLabel: unlabeled traffic allowed by default [ 0.464561] clocksource: Switched to clocksource tsc-early [ 0.479280] VFS: Disk quotas dquot_6.6.0 [ 0.479518] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.479749] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.480104] pnp: PnP ACPI init [ 0.480666] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.480706] xen: registering gsi 8 triggering 1 polarity 0 [ 0.480742] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.481184] xen: registering gsi 4 triggering 1 polarity 0 [ 0.481185] Already setup the GSI :4 [ 0.481466] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.481915] xen: registering gsi 3 triggering 1 polarity 0 [ 0.482021] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.483609] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.483784] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.483984] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.484168] system 00:04: [io 0x0dff] has been reserved [ 0.484337] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.484549] system 00:04: [io 0x0eff] has been reserved [ 0.484727] system 00:04: [io 0x040b] has been reserved [ 0.484894] system 00:04: [io 0x04d6] has been reserved [ 0.485088] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.485267] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.485437] system 00:04: [io 0x0c14] has been reserved [ 0.485606] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.485774] system 00:04: [io 0x0c6c] has been reserved [ 0.485983] system 00:04: [io 0x0c6f] has been reserved [ 0.486161] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.486357] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.486525] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.486700] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.486872] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.487046] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.487227] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.487436] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.487631] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.487801] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.487972] system 00:04: [io 0x0950] has been reserved [ 0.488166] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.488250] pnp 00:05: [irq 0 disabled] [ 0.488290] system 00:05: [io 0x0ca8] has been reserved [ 0.488458] system 00:05: [io 0x0cac] has been reserved [ 0.488675] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.490155] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.490340] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.490648] pnp: PnP ACPI: found 7 devices [ 0.504207] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.504477] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.504679] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.504856] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.505043] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.505228] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.505453] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.505630] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.505836] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.506126] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.506127] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.506129] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.506130] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.506131] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.506133] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.506134] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.506136] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.506137] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.506138] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.506140] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.506141] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.506143] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.506144] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.506146] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.506147] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.506148] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.506150] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.506151] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.506152] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.506154] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.506155] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.506157] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.506158] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.506159] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.506161] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.506162] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.506273] NET: Registered protocol family 2 [ 0.506722] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.507004] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.507247] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.507446] TCP: Hash tables configured (established 4096 bind 4096) [ 0.509829] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.510007] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.510231] NET: Registered protocol family 1 [ 0.510960] RPC: Registered named UNIX socket transport module. [ 0.511156] RPC: Registered udp transport module. [ 0.511322] RPC: Registered tcp transport module. [ 0.511490] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.512186] xen: registering gsi 16 triggering 0 polarity 1 [ 0.512263] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.640407] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 125342 usecs [ 0.640791] xen: registering gsi 16 triggering 0 polarity 1 [ 0.640807] Already setup the GSI :16 [ 0.641185] xen: registering gsi 17 triggering 0 polarity 1 [ 0.641249] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.641486] xen: registering gsi 18 triggering 0 polarity 1 [ 0.641498] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.641658] xen: registering gsi 18 triggering 0 polarity 1 [ 0.641660] Already setup the GSI :18 [ 0.641982] xen: registering gsi 19 triggering 0 polarity 1 [ 0.641995] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.642194] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.642472] PCI: CLS 64 bytes, default 64 [ 0.642586] Unpacking initramfs... [ 1.082685] Freeing initrd memory: 25904K [ 1.083046] kvm: no hardware support [ 1.083225] has_svm: svm not available [ 1.083390] kvm: no hardware support [ 1.086374] Scanning for low memory corruption every 60 seconds [ 1.088023] Initialise system trusted keyrings [ 1.088312] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.090916] NFS: Registering the id_resolver key type [ 1.091106] Key type id_resolver registered [ 1.091280] Key type id_legacy registered [ 1.097046] Key type asymmetric registered [ 1.097260] Asymmetric key parser 'x509' registered [ 1.097474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.097790] io scheduler noop registered [ 1.097952] io scheduler deadline registered [ 1.098224] io scheduler cfq registered (default) [ 1.098415] io scheduler mq-deadline registered [ 1.098579] io scheduler kyber registered [ 1.099575] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.099750] xen: registering gsi 52 triggering 0 polarity 0 [ 1.099831] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.100242] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.100450] xen: registering gsi 53 triggering 0 polarity 0 [ 1.100465] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.100704] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.100928] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.101312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.101615] ACPI: Power Button [PWRF] [ 1.102548] Warning: Processor Platform Limit not supported. [ 1.102981] xen:xen_evtchn: Event-channel device installed [ 1.103331] xen_pciback: backend is vpci [ 1.104492] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.125991] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.127386] hpet_acpi_add: no address or irqs in _CRS [ 1.127794] Non-volatile memory driver v1.3 [ 1.132441] loop: module loaded [ 1.138669] ahci 0000:00:11.0: version 3.0 [ 1.138834] xen: registering gsi 22 triggering 0 polarity 1 [ 1.138884] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.139076] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.139430] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.140717] scsi host0: ahci [ 1.141216] scsi host1: ahci [ 1.141727] scsi host2: ahci [ 1.142323] scsi host3: ahci [ 1.142638] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.142908] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.143182] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.143504] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.144065] tun: Universal TUN/TAP device driver, 1.6 [ 1.144408] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.144575] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.144814] sky2: driver version 1.30 [ 1.145072] xen_netfront: Initialising Xen virtual ethernet driver [ 1.145473] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.145644] ehci-pci: EHCI PCI platform driver [ 1.146058] xen: registering gsi 17 triggering 0 polarity 1 [ 1.146074] Already setup the GSI :17 [ 1.146375] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.146642] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.146920] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.147248] ehci-pci 0000:00:12.2: debug port 1 [ 1.147621] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.155221] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.155520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.155820] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.156108] usb usb1: Product: EHCI Host Controller [ 1.156293] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.156461] usb usb1: SerialNumber: 0000:00:12.2 [ 1.157008] hub 1-0:1.0: USB hub found [ 1.157181] hub 1-0:1.0: 6 ports detected [ 1.157818] xen: registering gsi 19 triggering 0 polarity 1 [ 1.157834] Already setup the GSI :19 [ 1.158157] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.158454] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.158763] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.159059] ehci-pci 0000:00:13.2: debug port 1 [ 1.159394] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.166206] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.166494] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.166793] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.167092] usb usb2: Product: EHCI Host Controller [ 1.167279] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.167448] usb usb2: SerialNumber: 0000:00:13.2 [ 1.167922] hub 2-0:1.0: USB hub found [ 1.168093] hub 2-0:1.0: 6 ports detected [ 1.168537] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.168738] ohci-pci: OHCI PCI platform driver [ 1.169115] xen: registering gsi 16 triggering 0 polarity 1 [ 1.169144] Already setup the GSI :16 [ 1.169373] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.169732] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.170152] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.226337] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.226702] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.226973] usb usb3: Product: OHCI PCI host controller [ 1.227154] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.227319] usb usb3: SerialNumber: 0000:00:12.0 [ 1.227860] hub 3-0:1.0: USB hub found [ 1.228067] hub 3-0:1.0: 3 ports detected [ 1.228553] xen: registering gsi 16 triggering 0 polarity 1 [ 1.228583] Already setup the GSI :16 [ 1.228819] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.229196] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.229596] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.285318] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.285636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.285901] usb usb4: Product: OHCI PCI host controller [ 1.286067] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.286277] usb usb4: SerialNumber: 0000:00:12.1 [ 1.286862] hub 4-0:1.0: USB hub found [ 1.287042] hub 4-0:1.0: 3 ports detected [ 1.287580] xen: registering gsi 18 triggering 0 polarity 1 [ 1.287618] Already setup the GSI :18 [ 1.287861] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.288175] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.288576] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.344338] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.344668] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.344937] usb usb5: Product: OHCI PCI host controller [ 1.345145] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.345317] usb usb5: SerialNumber: 0000:00:13.0 [ 1.345891] hub 5-0:1.0: USB hub found [ 1.346059] hub 5-0:1.0: 3 ports detected [ 1.346670] xen: registering gsi 18 triggering 0 polarity 1 [ 1.346688] Already setup the GSI :18 [ 1.346947] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.347247] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.347639] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.403337] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.403685] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.403954] usb usb6: Product: OHCI PCI host controller [ 1.404162] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.404330] usb usb6: SerialNumber: 0000:00:13.1 [ 1.404902] hub 6-0:1.0: USB hub found [ 1.405070] hub 6-0:1.0: 3 ports detected [ 1.405484] uhci_hcd: USB Universal Host Controller Interface driver [ 1.405744] usbcore: registered new interface driver usblp [ 1.405960] usbcore: registered new interface driver usb-storage [ 1.406224] i8042: PNP: No PS/2 controller found. [ 1.406385] i8042: Probing ports directly. [ 1.409615] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.409855] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.410408] rtc_cmos 00:01: RTC can wake from S4 [ 1.410910] rtc_cmos 00:01: registered as rtc0 [ 1.411178] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.411515] device-mapper: uevent: version 1.0.3 [ 1.411852] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.412173] hidraw: raw HID events driver (C) Jiri Kosina [ 1.412706] usbcore: registered new interface driver usbhid [ 1.414824] usbhid: USB HID core driver [ 1.416549] Initializing XFRM netlink socket [ 1.416932] NET: Registered protocol family 10 [ 1.417532] Segment Routing with IPv6 [ 1.418380] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.418818] NET: Registered protocol family 17 [ 1.419003] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.419344] Key type dns_resolver registered [ 1.420721] mce: Using 2 MCE banks [ 1.420986] Using IPI No-Shortcut mode [ 1.421178] sched_clock: Marking stable (1385802211, 35354778)->(1428420695, -7263706) [ 1.422697] registered taskstats version 1 [ 1.422865] Loading compiled-in X.509 certificates [ 1.423443] Magic number: 13:412:233 [ 1.423937] console [netcon0] enabled [ 1.424096] netconsole: network logging started [ 1.424378] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.433366] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.434276] ata3: SATA link down (SStatus 0 SControl 300) [ 1.434555] ata2: SATA link down (SStatus 0 SControl 300) [ 1.434797] ata4: SATA link down (SStatus 0 SControl 300) [ 1.435028] ata1: SATA link down (SStatus 0 SControl 300) [ 1.435958] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.436207] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.436479] cfg80211: failed to load regulatory.db [ 1.436718] ALSA device list: [ 1.436874] No soundcards found. [ 1.438161] Freeing unused kernel image memory: 840K [ 1.450201] Write protecting the kernel text: 9000k [ 1.450953] Write protecting the kernel read-only data: 2360k [ 1.451137] NX-protecting the kernel data: 5336k [ 1.452077] Run /init as init process [ 1.562406] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.562746] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.563695] hub 1-3:1.0: USB hub found [ 1.564008] hub 1-3:1.0: 4 ports detected [ 1.611441] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.612007] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.612217] xen: registering gsi 48 triggering 0 polarity 0 [ 1.612270] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.613051] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.613535] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.613703] xen: registering gsi 49 triggering 0 polarity 0 [ 1.613720] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.614468] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.617885] mpt3sas version 26.100.00.00 loaded [ 1.618309] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.619012] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.619209] xen: registering gsi 24 triggering 0 polarity 0 [ 1.619252] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.619296] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.659306] random: crng init done [ 1.662648] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.662966] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.663495] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.663670] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x29c35b6d), size(65536) [ 1.663969] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 1.717258] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.717634] mpt2sas_cm0: sending diag reset !! [ 2.055268] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c8e6fa9d, max_idle_ns: 440795287020 ns [ 2.055772] clocksource: Switched to clocksource tsc [ 3.022123] mpt2sas_cm0: diag reset: SUCCESS [ 3.067620] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.067890] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.068179] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.098752] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.099162] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.099198] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.099755] mpt2sas_cm0: Protocol=( [ 3.099755] Initiator [ 3.099914] ,Target [ 3.100066] ), [ 3.100241] Capabilities=( [ 3.100423] Raid [ 3.100579] ,TLR [ 3.100734] ,EEDP [ 3.100885] ,Snapshot Buffer [ 3.101041] ,Diag Trace Buffer [ 3.101212] ,Task Set Full [ 3.101372] ,NCQ [ 3.101528] ) [ 3.102070] scsi host4: Fusion MPT SAS Host [ 3.113373] mpt2sas_cm0: sending port enable !! [ 4.697081] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 10.829200] mpt2sas_cm0: port enable: SUCCESS [ 10.830983] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 10.831268] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 10.831554] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 10.831836] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 10.833192] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 10.834428] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.915005] sd 4:0:0:0: [sda] Write Protect is off [ 10.915225] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 10.915785] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.990161] sda: sda1 sda2 < sda5 > [ 11.066104] sd 4:0:0:0: [sda] Attached SCSI disk [ 11.869560] PM: Image not found (code -22) [ 12.272192] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.591427] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.962329] systemd-udevd[1519]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.236019] systemd-udevd[1537]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.236048] systemd-udevd[1530]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.258979] systemd-udevd[1537]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.259090] systemd-udevd[1530]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.266878] systemd-udevd[1529]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.266931] systemd-udevd[1533]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.272118] systemd-udevd[1529]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.272784] systemd-udevd[1533]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.655459] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.813409] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.876863] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.946326] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.522018] systemd-udevd[1532]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.526371] xenbr0: port 1(eth0) entered blocking state [ 17.526559] xenbr0: port 1(eth0) entered disabled state [ 17.526801] device eth0 entered promiscuous mode [ 17.626492] bnx2 0000:02:00.0 eth0: using MSIX [ 17.633380] xenbr0: port 1(eth0) entered blocking state [ 17.633588] xenbr0: port 1(eth0) entered forwarding state [ 17.633772] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready