[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nocera0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:57:12 UTC 2021 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031355] tsc: Fast TSC calibration using PIT [ 0.031360] tsc: Detected 2800.226 MHz processor [ 0.031362] tsc: Detected 2800.078 MHz TSC [ 0.053582] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053587] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053592] last_pfn = 0x20062 max_arch_pfn = 0x1000000 [ 0.053595] Disabled [ 0.053598] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053608] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053653] Scanning 1 areas for low memory corruption [ 0.053655] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.053994] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.214050] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.214176] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.214225] RAMDISK: [mem 0x04000000-0x0594bfff] [ 0.214247] ACPI: Early table checksum verification disabled [ 0.229003] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.229015] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229068] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.229191] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.229205] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.229215] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.229224] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.229237] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229250] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229261] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229272] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229284] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229297] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229309] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229321] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229332] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229345] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229356] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.229368] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.229381] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.229392] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.229403] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.229441] ACPI: Local APIC address 0xfee00000 [ 0.229444] Switched to APIC driver `Xen PV'. [ 0.229493] 0MB HIGHMEM available. [ 0.229495] 512MB LOWMEM available. [ 0.229497] mapped low ram: 0 - 20062000 [ 0.229498] low ram: 0 - 20062000 [ 0.229503] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.229525] Zone ranges: [ 0.229527] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.229530] Normal [mem 0x0000000001000000-0x0000000020061fff] [ 0.229531] HighMem empty [ 0.229533] Movable zone start for each node [ 0.229534] Early memory node ranges [ 0.229536] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.229537] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.229540] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.229544] On node 0 totalpages: 131071 [ 0.231733] DMA zone: 32 pages used for memmap [ 0.231735] DMA zone: 0 pages reserved [ 0.231737] DMA zone: 3997 pages, LIFO batch:0 [ 0.231840] Normal zone: 993 pages used for memmap [ 0.231841] Normal zone: 127074 pages, LIFO batch:31 [ 0.234670] p2m virtual area at (ptrval), size is 400000 [ 0.235298] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.236240] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.237532] Remapped 98 page(s) [ 0.237536] Using APIC driver Xen PV [ 0.237986] ACPI: PM-Timer IO Port: 0x808 [ 0.237993] ACPI: Local APIC address 0xfee00000 [ 0.237994] Switched to APIC driver `Xen PV'. [ 0.238178] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.238237] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.238246] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.238282] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.238290] ACPI: IRQ0 used by override. [ 0.238291] ACPI: IRQ9 used by override. [ 0.238326] Using ACPI (MADT) for SMP configuration information [ 0.238331] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.238338] ACPI: SPCR: SPCR table version 1 [ 0.238342] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.238352] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.238375] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.238377] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.238378] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.238382] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.238403] Booting paravirtualized kernel on Xen [ 0.238405] Xen version: 4.16-rc (preserve-AD) [ 0.238411] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.238432] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.238442] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.239120] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.239127] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.239128] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.239237] xen: PV spinlocks enabled [ 0.239243] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.239251] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.239255] Kernel command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.239538] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.239609] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.239699] Initializing CPU#0 [ 0.331513] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.331526] Initializing HighMem for node 0 (00000000:00000000) [ 0.334720] Memory: 411484K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 112800K reserved, 0K cma-reserved, 0K highmem) [ 0.334728] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0862000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0062000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.334733] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.334869] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.335084] rcu: Hierarchical RCU implementation. [ 0.335086] rcu: RCU event tracing is enabled. [ 0.335407] Using NULL legacy PIC [ 0.335409] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.335484] xen:events: Using FIFO-based ABI [ 0.335500] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.335566] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.335571] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.335576] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.335580] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.335584] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.335589] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.335593] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.335597] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.335601] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.335606] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.335611] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.335615] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.335620] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.335624] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.335629] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.342544] Console: colour VGA+ 80x25 [ 0.362356] console [tty0] enabled [ 0.362995] console [hvc0] enabled [ 0.363169] ACPI: Core revision 20180810 [ 0.370060] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.370351] Xen: using vcpuop timer interface [ 0.370361] installing Xen timer for CPU 0 [ 0.370628] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c8a75817, max_idle_ns: 440795285531 ns [ 0.370967] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.15 BogoMIPS (lpj=2800078) [ 0.371273] pid_max: default: 32768 minimum: 301 [ 0.371467] Security Framework initialized [ 0.371934] SELinux: Initializing. [ 0.372130] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.372305] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.372835] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.372921] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.373097] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.373375] Spectre V2 : Mitigation: Full AMD retpoline [ 0.373542] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.374136] Freeing SMP alternatives memory: 36K [ 0.377164] cpu 0 spinlock event irq 57 [ 0.377345] VPMU disabled by hypervisor. [ 0.377700] Performance Events: PMU not available due to virtualization, using software events only. [ 0.378015] rcu: Hierarchical SRCU implementation. [ 0.378427] smp: Bringing up secondary CPUs ... [ 0.378714] installing Xen timer for CPU 1 [ 0.378976] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036276] Initializing CPU#1 [ 0.379377] cpu 1 spinlock event irq 69 [ 0.380071] installing Xen timer for CPU 2 [ 0.380303] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036276] Initializing CPU#2 [ 0.380645] cpu 2 spinlock event irq 76 [ 0.381035] installing Xen timer for CPU 3 [ 0.381254] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036276] Initializing CPU#3 [ 0.381481] cpu 3 spinlock event irq 83 [ 0.382040] installing Xen timer for CPU 4 [ 0.382254] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036276] Initializing CPU#4 [ 0.382920] cpu 4 spinlock event irq 90 [ 0.383055] installing Xen timer for CPU 5 [ 0.383330] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036276] Initializing CPU#5 [ 0.384045] cpu 5 spinlock event irq 97 [ 0.384342] installing Xen timer for CPU 6 [ 0.384937] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036276] Initializing CPU#6 [ 0.385207] cpu 6 spinlock event irq 104 [ 0.385384] installing Xen timer for CPU 7 [ 0.385992] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036276] Initializing CPU#7 [ 0.386248] cpu 7 spinlock event irq 111 [ 0.386347] smp: Brought up 1 node, 8 CPUs [ 0.386929] smpboot: Max logical packages: 1 [ 0.387314] devtmpfs: initialized [ 0.388355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.388936] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.389358] RTC time: 21:29:42, date: 11/22/21 [ 0.389735] NET: Registered protocol family 16 [ 0.389936] xen:grant_table: Grant tables using version 1 layout [ 0.390201] Grant table initialized [ 0.391295] audit: initializing netlink subsys (disabled) [ 0.391547] audit: type=2000 audit(1637616582.634:1): state=initialized audit_enabled=0 res=1 [ 0.392062] node 0 link 1: io port [e000, ffff] [ 0.392074] TOM: 00000000c0000000 aka 3072M [ 0.392252] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.392258] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.392269] node 0 link 1: mmio [fec80000, fecbffff] [ 0.392274] TOM2: 0000000840000000 aka 33792M [ 0.392466] bus: [bus 00-3f] on node 0 link 1 [ 0.392468] bus: 00 [io 0x0000-0xffff] [ 0.392469] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.392470] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.392471] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.393062] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.393339] ACPI: bus type PCI registered [ 0.394148] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.394434] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.394615] PCI: Using MMCONFIG for extended config space [ 0.394793] PCI: Using configuration type 1 for base access [ 0.399208] random: fast init done [ 0.400158] ACPI: Added _OSI(Module Device) [ 0.400356] ACPI: Added _OSI(Processor Device) [ 0.400518] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.400686] ACPI: Added _OSI(Processor Aggregator Device) [ 0.400897] ACPI: Added _OSI(Linux-Dell-Video) [ 0.400923] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.405100] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.405641] xen: registering gsi 9 triggering 0 polarity 1 [ 0.406109] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.410209] ACPI: Interpreter enabled [ 0.410428] ACPI: (supports S0 S4 S5) [ 0.410591] ACPI: Using IOAPIC for interrupt routing [ 0.410820] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.411202] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.429375] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.429575] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.430650] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.430922] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.433390] PCI host bridge to bus 0000:00 [ 0.433557] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.433765] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.433924] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.434102] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.434272] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.434474] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.434753] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.434922] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.435205] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.435476] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.435770] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.435923] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.436124] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.436923] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.437027] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.437027] pci 0000:00:02.0: enabling Extended Tags [ 0.437027] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.437921] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.437921] pci 0000:00:09.0: enabling Extended Tags [ 0.437921] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.437984] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.437984] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.437984] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.437984] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.437984] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.437984] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.437984] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.437984] pci 0000:00:11.0: set SATA to AHCI mode [ 0.438920] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.438920] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.438947] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.438947] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.438947] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.438947] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.438947] pci 0000:00:12.2: supports D1 D2 [ 0.438947] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.438972] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.439010] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.439920] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.439920] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.439960] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.439960] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.439960] pci 0000:00:13.2: supports D1 D2 [ 0.439960] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.439960] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.440922] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.440922] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.440922] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.440922] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.440922] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.440922] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.440958] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.440958] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.440958] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.441147] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.441946] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.441946] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.441954] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.441954] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.442012] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.442167] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.442949] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.442949] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.442950] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.442950] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.442950] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.442950] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.442950] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.442950] pci 0000:01:00.0: enabling Extended Tags [ 0.443210] pci 0000:01:00.0: supports D1 D2 [ 0.443340] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.443515] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.443521] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.443943] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.443943] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.443946] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.444010] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.444445] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.444498] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.444724] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.444947] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.445106] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.445138] pci_bus 0000:03: extended config space not accessible [ 0.445365] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.445405] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.445427] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.445448] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.445941] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.445941] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.445941] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.445941] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.445941] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.445941] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.445941] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.445942] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.445944] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.445946] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.445947] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.445949] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.445950] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.445951] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.445996] pci_bus 0000:00: on NUMA node 0 [ 0.446124] xen: registering gsi 13 triggering 1 polarity 0 [ 0.448184] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.448487] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.448756] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.449018] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.449282] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.449539] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.449860] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.450015] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.450284] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.450547] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.450807] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.451016] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.451275] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.451531] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.451790] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.452016] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.452315] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.452577] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.452838] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.454016] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.454278] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.454562] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.454832] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.455013] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.455306] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.455568] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.455846] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.456008] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.456271] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.456530] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.456792] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.457006] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.457464] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.457767] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.458050] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.458360] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.458682] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.458979] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.459279] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.459584] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.460113] xen:balloon: Initialising balloon driver [ 0.460413] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.460413] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.460955] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.461125] vgaarb: loaded [ 0.461429] SCSI subsystem initialized [ 0.461661] libata version 3.00 loaded. [ 0.461661] ACPI: bus type USB registered [ 0.462388] usbcore: registered new interface driver usbfs [ 0.462574] usbcore: registered new interface driver hub [ 0.462932] usbcore: registered new device driver usb [ 0.462963] pps_core: LinuxPPS API ver. 1 registered [ 0.463148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.463435] PTP clock support registered [ 0.463988] EDAC MC: Ver: 3.0.0 [ 0.464150] Advanced Linux Sound Architecture Driver Initialized. [ 0.464219] PCI: Using ACPI for IRQ routing [ 0.469467] PCI: pci_cache_line_size set to 64 bytes [ 0.469620] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.469795] Expanded resource Reserved due to conflict with Reserved [ 0.469922] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.469925] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.470222] NetLabel: Initializing [ 0.470421] NetLabel: domain hash size = 128 [ 0.470585] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.470774] NetLabel: unlabeled traffic allowed by default [ 0.471361] clocksource: Switched to clocksource tsc-early [ 0.485683] VFS: Disk quotas dquot_6.6.0 [ 0.485941] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.486160] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.486547] pnp: PnP ACPI init [ 0.487010] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.487045] xen: registering gsi 8 triggering 1 polarity 0 [ 0.487089] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.487514] xen: registering gsi 4 triggering 1 polarity 0 [ 0.487516] Already setup the GSI :4 [ 0.487799] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.488201] xen: registering gsi 3 triggering 1 polarity 0 [ 0.488306] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.489808] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.489994] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.490165] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.490337] system 00:04: [io 0x0dff] has been reserved [ 0.490574] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.490746] system 00:04: [io 0x0eff] has been reserved [ 0.490915] system 00:04: [io 0x040b] has been reserved [ 0.491102] system 00:04: [io 0x04d6] has been reserved [ 0.491271] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.491444] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.491614] system 00:04: [io 0x0c14] has been reserved [ 0.491815] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.492011] system 00:04: [io 0x0c6c] has been reserved [ 0.492181] system 00:04: [io 0x0c6f] has been reserved [ 0.492352] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.492528] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.492701] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.492897] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.493080] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.493276] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.493453] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.493629] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.493801] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.493972] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.494168] system 00:04: [io 0x0950] has been reserved [ 0.494349] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.494440] pnp 00:05: [irq 0 disabled] [ 0.494499] system 00:05: [io 0x0ca8] has been reserved [ 0.494706] system 00:05: [io 0x0cac] has been reserved [ 0.494886] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.496320] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.496512] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.496810] pnp: PnP ACPI: found 7 devices [ 0.509790] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.510125] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.510300] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.510483] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.510672] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.510847] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.511040] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.511251] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.511437] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.511727] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.511729] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.511730] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.511732] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.511733] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.511735] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.511736] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.511738] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.511739] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.511741] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.511742] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.511743] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.511745] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.511747] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.511749] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.511750] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.511751] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.511753] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.511754] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.511755] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.511757] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.511758] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.511759] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.511761] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.511762] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.511763] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.511765] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.511885] NET: Registered protocol family 2 [ 0.512314] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.512634] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.512830] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.513048] TCP: Hash tables configured (established 4096 bind 4096) [ 0.515422] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.515602] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.515840] NET: Registered protocol family 1 [ 0.516545] RPC: Registered named UNIX socket transport module. [ 0.516733] RPC: Registered udp transport module. [ 0.516945] RPC: Registered tcp transport module. [ 0.517109] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.517736] xen: registering gsi 16 triggering 0 polarity 1 [ 0.517793] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.646206] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 125545 usecs [ 0.646591] xen: registering gsi 16 triggering 0 polarity 1 [ 0.646609] Already setup the GSI :16 [ 0.646998] xen: registering gsi 17 triggering 0 polarity 1 [ 0.647066] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.647246] xen: registering gsi 18 triggering 0 polarity 1 [ 0.647260] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.647420] xen: registering gsi 18 triggering 0 polarity 1 [ 0.647422] Already setup the GSI :18 [ 0.647741] xen: registering gsi 19 triggering 0 polarity 1 [ 0.647753] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.647952] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.648247] PCI: CLS 64 bytes, default 64 [ 0.648364] Unpacking initramfs... [ 1.074077] Freeing initrd memory: 25904K [ 1.074576] kvm: no hardware support [ 1.074744] has_svm: svm not available [ 1.074905] kvm: no hardware support [ 1.078108] Scanning for low memory corruption every 60 seconds [ 1.079749] Initialise system trusted keyrings [ 1.080031] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.082666] NFS: Registering the id_resolver key type [ 1.082843] Key type id_resolver registered [ 1.083056] Key type id_legacy registered [ 1.088510] Key type asymmetric registered [ 1.088729] Asymmetric key parser 'x509' registered [ 1.088957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.089243] io scheduler noop registered [ 1.089402] io scheduler deadline registered [ 1.089724] io scheduler cfq registered (default) [ 1.089892] io scheduler mq-deadline registered [ 1.090064] io scheduler kyber registered [ 1.091069] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.091242] xen: registering gsi 52 triggering 0 polarity 0 [ 1.091297] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.091771] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.091949] xen: registering gsi 53 triggering 0 polarity 0 [ 1.091967] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.092247] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.092474] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.092926] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.093229] ACPI: Power Button [PWRF] [ 1.094149] Warning: Processor Platform Limit not supported. [ 1.094540] xen:xen_evtchn: Event-channel device installed [ 1.094823] xen_pciback: backend is vpci [ 1.095854] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.117260] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.118581] hpet_acpi_add: no address or irqs in _CRS [ 1.118933] Non-volatile memory driver v1.3 [ 1.123657] loop: module loaded [ 1.130517] ahci 0000:00:11.0: version 3.0 [ 1.130732] xen: registering gsi 22 triggering 0 polarity 1 [ 1.130790] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.130996] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.131316] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.132575] scsi host0: ahci [ 1.133110] scsi host1: ahci [ 1.133654] scsi host2: ahci [ 1.134210] scsi host3: ahci [ 1.134659] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.134959] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.135239] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.135553] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.136128] tun: Universal TUN/TAP device driver, 1.6 [ 1.136474] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.136671] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.136877] sky2: driver version 1.30 [ 1.137166] xen_netfront: Initialising Xen virtual ethernet driver [ 1.137552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.137727] ehci-pci: EHCI PCI platform driver [ 1.138091] xen: registering gsi 17 triggering 0 polarity 1 [ 1.138106] Already setup the GSI :17 [ 1.138352] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.138636] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.138915] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.139240] ehci-pci 0000:00:12.2: debug port 1 [ 1.139624] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.146984] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.147244] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.147525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.147857] usb usb1: Product: EHCI Host Controller [ 1.148041] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.148210] usb usb1: SerialNumber: 0000:00:12.2 [ 1.148773] hub 1-0:1.0: USB hub found [ 1.148984] hub 1-0:1.0: 6 ports detected [ 1.149575] xen: registering gsi 19 triggering 0 polarity 1 [ 1.149591] Already setup the GSI :19 [ 1.149825] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.150116] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.150393] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.150730] ehci-pci 0000:00:13.2: debug port 1 [ 1.151039] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.158002] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.158284] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.158566] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.158894] usb usb2: Product: EHCI Host Controller [ 1.159089] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.159260] usb usb2: SerialNumber: 0000:00:13.2 [ 1.159784] hub 2-0:1.0: USB hub found [ 1.159990] hub 2-0:1.0: 6 ports detected [ 1.160411] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.160606] ohci-pci: OHCI PCI platform driver [ 1.160965] xen: registering gsi 16 triggering 0 polarity 1 [ 1.160975] Already setup the GSI :16 [ 1.161226] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.161627] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.162038] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.219120] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.219445] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.219740] usb usb3: Product: OHCI PCI host controller [ 1.219956] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.220126] usb usb3: SerialNumber: 0000:00:12.0 [ 1.220679] hub 3-0:1.0: USB hub found [ 1.220859] hub 3-0:1.0: 3 ports detected [ 1.221342] xen: registering gsi 16 triggering 0 polarity 1 [ 1.221354] Already setup the GSI :16 [ 1.221578] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.221943] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.222325] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.278105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.278459] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.278730] usb usb4: Product: OHCI PCI host controller [ 1.278898] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.279086] usb usb4: SerialNumber: 0000:00:12.1 [ 1.279610] hub 4-0:1.0: USB hub found [ 1.279785] hub 4-0:1.0: 3 ports detected [ 1.280227] xen: registering gsi 18 triggering 0 polarity 1 [ 1.280243] Already setup the GSI :18 [ 1.280520] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.280840] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.281268] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.337096] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.337425] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.337710] usb usb5: Product: OHCI PCI host controller [ 1.337891] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.338077] usb usb5: SerialNumber: 0000:00:13.0 [ 1.338671] hub 5-0:1.0: USB hub found [ 1.338844] hub 5-0:1.0: 3 ports detected [ 1.339353] xen: registering gsi 18 triggering 0 polarity 1 [ 1.339376] Already setup the GSI :18 [ 1.339629] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.339951] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.340313] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.396107] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.396432] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.396706] usb usb6: Product: OHCI PCI host controller [ 1.396901] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.397092] usb usb6: SerialNumber: 0000:00:13.1 [ 1.397605] hub 6-0:1.0: USB hub found [ 1.397787] hub 6-0:1.0: 3 ports detected [ 1.398126] uhci_hcd: USB Universal Host Controller Interface driver [ 1.398356] usbcore: registered new interface driver usblp [ 1.398559] usbcore: registered new interface driver usb-storage [ 1.398794] i8042: PNP: No PS/2 controller found. [ 1.398977] i8042: Probing ports directly. [ 1.402114] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.402346] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.402954] rtc_cmos 00:01: RTC can wake from S4 [ 1.403477] rtc_cmos 00:01: registered as rtc0 [ 1.403677] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.404006] device-mapper: uevent: version 1.0.3 [ 1.404328] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.404659] hidraw: raw HID events driver (C) Jiri Kosina [ 1.405139] usbcore: registered new interface driver usbhid [ 1.407383] usbhid: USB HID core driver [ 1.408986] Initializing XFRM netlink socket [ 1.409412] NET: Registered protocol family 10 [ 1.409965] Segment Routing with IPv6 [ 1.410728] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.411149] NET: Registered protocol family 17 [ 1.411368] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.411724] Key type dns_resolver registered [ 1.413025] mce: Using 2 MCE banks [ 1.413230] Using IPI No-Shortcut mode [ 1.413411] sched_clock: Marking stable (1377647748, 35276174)->(1419375040, -6451118) [ 1.414852] registered taskstats version 1 [ 1.415027] Loading compiled-in X.509 certificates [ 1.415622] Magic number: 13:838:500 [ 1.415990] console [netcon0] enabled [ 1.416150] netconsole: network logging started [ 1.416415] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.427491] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.427801] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.428120] cfg80211: failed to load regulatory.db [ 1.428328] ALSA device list: [ 1.428492] No soundcards found. [ 1.445132] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.447142] ata1: SATA link down (SStatus 0 SControl 300) [ 1.447415] ata2: SATA link down (SStatus 0 SControl 300) [ 1.448139] ata4: SATA link down (SStatus 0 SControl 300) [ 1.448373] ata3: SATA link down (SStatus 0 SControl 300) [ 1.449522] Freeing unused kernel image memory: 840K [ 1.456126] Write protecting the kernel text: 9000k [ 1.457004] Write protecting the kernel read-only data: 2360k [ 1.457177] NX-protecting the kernel data: 5336k [ 1.458227] Run /init as init process [ 1.574151] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.574479] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.575466] hub 1-3:1.0: USB hub found [ 1.575771] hub 1-3:1.0: 4 ports detected [ 1.618459] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.619031] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.619270] xen: registering gsi 48 triggering 0 polarity 0 [ 1.619324] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.620078] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a7:02 [ 1.620624] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.620796] xen: registering gsi 49 triggering 0 polarity 0 [ 1.620813] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.621455] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a7:03 [ 1.623339] mpt3sas version 26.100.00.00 loaded [ 1.623790] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.624626] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.624830] xen: registering gsi 24 triggering 0 polarity 0 [ 1.624882] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.624978] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.680770] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.681124] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.681628] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.681792] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x(ptrval)), size(65536) [ 1.682069] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 1.731748] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.732104] mpt2sas_cm0: sending diag reset !! [ 1.894172] random: crng init done [ 2.066062] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c8a75817, max_idle_ns: 440795285531 ns [ 2.066586] clocksource: Switched to clocksource tsc [ 3.032037] mpt2sas_cm0: diag reset: SUCCESS [ 3.075798] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.076082] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.076362] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.124428] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.124822] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.125106] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.125416] mpt2sas_cm0: Protocol=( [ 3.125417] Initiator [ 3.125578] ,Target [ 3.125734] ), [ 3.125890] Capabilities=( [ 3.126099] Raid [ 3.126260] ,TLR [ 3.126416] ,EEDP [ 3.126596] ,Snapshot Buffer [ 3.126751] ,Diag Trace Buffer [ 3.126910] ,Task Set Full [ 3.127073] ,NCQ [ 3.127233] ) [ 3.127666] scsi host4: Fusion MPT SAS Host [ 3.139096] mpt2sas_cm0: sending port enable !! [ 4.708273] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5600), phys(8) [ 10.830937] mpt2sas_cm0: port enable: SUCCESS [ 10.832650] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 10.832943] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002536ebe0) [ 10.833252] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5600), slot(0) [ 10.833506] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 10.834785] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 10.836097] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.924632] sd 4:0:0:0: [sda] Write Protect is off [ 10.924838] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 10.925439] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.995897] sda: sda1 sda2 < sda5 > [ 11.068865] sd 4:0:0:0: [sda] Attached SCSI disk [ 11.824720] PM: Image not found (code -22) [ 12.219369] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.530140] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.890703] systemd-udevd[1519]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.180166] systemd-udevd[1537]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.180191] systemd-udevd[1532]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.218453] systemd-udevd[1538]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.218514] systemd-udevd[1531]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.233991] systemd-udevd[1537]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.234028] systemd-udevd[1538]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.234160] systemd-udevd[1531]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.234228] systemd-udevd[1532]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.644488] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.826639] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.887260] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.967955] Adding 1949692k swap on /dev/mapper/nocera0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.584606] systemd-udevd[1537]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.589213] xenbr0: port 1(eth0) entered blocking state [ 17.589393] xenbr0: port 1(eth0) entered disabled state [ 17.589631] device eth0 entered promiscuous mode [ 17.699288] bnx2 0000:02:00.0 eth0: using MSIX [ 17.706379] xenbr0: port 1(eth0) entered blocking state [ 17.706621] xenbr0: port 1(eth0) entered forwarding state [ 17.706808] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready