[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nocera0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:57:12 UTC 2021 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031571] tsc: Fast TSC calibration using PIT [ 0.031576] tsc: Detected 2800.269 MHz processor [ 0.031578] tsc: Detected 2800.038 MHz TSC [ 0.053662] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053666] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053672] last_pfn = 0x20062 max_arch_pfn = 0x1000000 [ 0.053676] Disabled [ 0.053679] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053688] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053732] Scanning 1 areas for low memory corruption [ 0.053733] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.054070] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.215127] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.215251] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.215299] RAMDISK: [mem 0x04000000-0x0594afff] [ 0.215321] ACPI: Early table checksum verification disabled [ 0.230081] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.230094] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230150] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.230268] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.230281] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.230291] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.230301] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.230314] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230326] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230338] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230350] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230361] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230374] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230387] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230399] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230411] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230424] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230436] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.230449] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.230462] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.230473] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.230485] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.230523] ACPI: Local APIC address 0xfee00000 [ 0.230526] Switched to APIC driver `Xen PV'. [ 0.230573] 0MB HIGHMEM available. [ 0.230575] 512MB LOWMEM available. [ 0.230577] mapped low ram: 0 - 20062000 [ 0.230578] low ram: 0 - 20062000 [ 0.230583] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.230605] Zone ranges: [ 0.230607] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.230610] Normal [mem 0x0000000001000000-0x0000000020061fff] [ 0.230612] HighMem empty [ 0.230614] Movable zone start for each node [ 0.230615] Early memory node ranges [ 0.230616] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.230618] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.230621] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.230625] On node 0 totalpages: 131071 [ 0.232819] DMA zone: 32 pages used for memmap [ 0.232821] DMA zone: 0 pages reserved [ 0.232823] DMA zone: 3997 pages, LIFO batch:0 [ 0.232926] Normal zone: 993 pages used for memmap [ 0.232927] Normal zone: 127074 pages, LIFO batch:31 [ 0.235746] p2m virtual area at (ptrval), size is 400000 [ 0.236378] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.237320] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.238613] Remapped 98 page(s) [ 0.238618] Using APIC driver Xen PV [ 0.239071] ACPI: PM-Timer IO Port: 0x808 [ 0.239078] ACPI: Local APIC address 0xfee00000 [ 0.239079] Switched to APIC driver `Xen PV'. [ 0.239267] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.239325] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.239334] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.239370] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.239377] ACPI: IRQ0 used by override. [ 0.239379] ACPI: IRQ9 used by override. [ 0.239414] Using ACPI (MADT) for SMP configuration information [ 0.239419] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.239426] ACPI: SPCR: SPCR table version 1 [ 0.239431] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.239439] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.239463] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.239465] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.239466] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.239471] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.239492] Booting paravirtualized kernel on Xen [ 0.239493] Xen version: 4.16-rc (preserve-AD) [ 0.239500] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.239520] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.239529] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.240211] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.240220] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.240222] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.240331] xen: PV spinlocks enabled [ 0.240337] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.240346] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.240350] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.240633] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.240703] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.240791] Initializing CPU#0 [ 0.332594] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.332607] Initializing HighMem for node 0 (00000000:00000000) [ 0.335815] Memory: 411488K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 112796K reserved, 0K cma-reserved, 0K highmem) [ 0.335823] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0862000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0062000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.335828] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.335970] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.336187] rcu: Hierarchical RCU implementation. [ 0.336188] rcu: RCU event tracing is enabled. [ 0.336503] Using NULL legacy PIC [ 0.336505] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.336578] xen:events: Using FIFO-based ABI [ 0.336594] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.336660] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.336666] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.336670] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.336675] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.336679] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.336684] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.336688] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.336693] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.336697] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.336702] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.336707] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.336711] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.336716] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.336720] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.336725] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.343455] Console: colour VGA+ 80x25 [ 0.363207] console [tty0] enabled [ 0.363845] console [hvc0] enabled [ 0.364019] ACPI: Core revision 20180810 [ 0.370866] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.371158] Xen: using vcpuop timer interface [ 0.371168] installing Xen timer for CPU 0 [ 0.371438] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c6447594, max_idle_ns: 440795205105 ns [ 0.371783] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.07 BogoMIPS (lpj=2800038) [ 0.372114] pid_max: default: 32768 minimum: 301 [ 0.372308] Security Framework initialized [ 0.372744] SELinux: Initializing. [ 0.372941] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.373119] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.373656] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.373732] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.373908] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.374187] Spectre V2 : Mitigation: Full AMD retpoline [ 0.374362] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.374946] Freeing SMP alternatives memory: 36K [ 0.377969] cpu 0 spinlock event irq 57 [ 0.378150] VPMU disabled by hypervisor. [ 0.378506] Performance Events: PMU not available due to virtualization, using software events only. [ 0.378827] rcu: Hierarchical SRCU implementation. [ 0.379242] smp: Bringing up secondary CPUs ... [ 0.379529] installing Xen timer for CPU 1 [ 0.379792] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.035991] Initializing CPU#1 [ 0.380138] cpu 1 spinlock event irq 69 [ 0.380895] installing Xen timer for CPU 2 [ 0.381131] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.035991] Initializing CPU#2 [ 0.381439] cpu 2 spinlock event irq 76 [ 0.381845] installing Xen timer for CPU 3 [ 0.382057] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.035991] Initializing CPU#3 [ 0.382326] cpu 3 spinlock event irq 83 [ 0.382846] installing Xen timer for CPU 4 [ 0.383081] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.035991] Initializing CPU#4 [ 0.383731] cpu 4 spinlock event irq 90 [ 0.383840] installing Xen timer for CPU 5 [ 0.384053] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.035991] Initializing CPU#5 [ 0.384822] cpu 5 spinlock event irq 97 [ 0.385167] installing Xen timer for CPU 6 [ 0.385167] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.035991] Initializing CPU#6 [ 0.385903] cpu 6 spinlock event irq 104 [ 0.386227] installing Xen timer for CPU 7 [ 0.386799] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.035991] Initializing CPU#7 [ 0.387047] cpu 7 spinlock event irq 111 [ 0.387147] smp: Brought up 1 node, 8 CPUs [ 0.387736] smpboot: Max logical packages: 1 [ 0.388098] devtmpfs: initialized [ 0.389162] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.389745] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.390192] RTC time: 21:46:08, date: 11/22/21 [ 0.390636] NET: Registered protocol family 16 [ 0.390777] xen:grant_table: Grant tables using version 1 layout [ 0.391008] Grant table initialized [ 0.392107] audit: initializing netlink subsys (disabled) [ 0.392292] audit: type=2000 audit(1637617568.850:1): state=initialized audit_enabled=0 res=1 [ 0.392848] node 0 link 1: io port [e000, ffff] [ 0.392848] TOM: 00000000c0000000 aka 3072M [ 0.392848] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.392848] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.392848] node 0 link 1: mmio [fec80000, fecbffff] [ 0.392848] TOM2: 0000000840000000 aka 33792M [ 0.392939] bus: [bus 00-3f] on node 0 link 1 [ 0.392940] bus: 00 [io 0x0000-0xffff] [ 0.392942] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.392943] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.392944] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.393782] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.394066] ACPI: bus type PCI registered [ 0.394922] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.394922] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.394922] PCI: Using MMCONFIG for extended config space [ 0.395088] PCI: Using configuration type 1 for base access [ 0.399875] random: fast init done [ 0.400917] ACPI: Added _OSI(Module Device) [ 0.401098] ACPI: Added _OSI(Processor Device) [ 0.401298] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.401735] ACPI: Added _OSI(Processor Aggregator Device) [ 0.401904] ACPI: Added _OSI(Linux-Dell-Video) [ 0.402065] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.406414] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.406967] xen: registering gsi 9 triggering 0 polarity 1 [ 0.407425] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.411479] ACPI: Interpreter enabled [ 0.411675] ACPI: (supports S0 S4 S5) [ 0.411736] ACPI: Using IOAPIC for interrupt routing [ 0.411970] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.412593] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.430768] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.430968] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.432013] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.432290] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.434761] PCI host bridge to bus 0000:00 [ 0.434931] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.435103] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.435275] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.435466] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.435640] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.435733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.436035] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.436302] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.436599] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.436733] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.436998] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.437301] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.437510] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.437917] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.438818] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.438818] pci 0000:00:02.0: enabling Extended Tags [ 0.438818] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.438871] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.438871] pci 0000:00:09.0: enabling Extended Tags [ 0.439037] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.439189] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.439237] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.439257] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.439277] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.439296] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.439315] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.439334] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.439381] pci 0000:00:11.0: set SATA to AHCI mode [ 0.439763] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.439763] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.439977] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.440015] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.440753] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.440753] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.440753] pci 0000:00:12.2: supports D1 D2 [ 0.440753] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.440753] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.440753] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.440854] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.440892] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.441106] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.441150] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.441352] pci 0000:00:13.2: supports D1 D2 [ 0.441353] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.441750] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.441783] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.441825] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.441846] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.441865] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.441884] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.441903] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.442091] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.442752] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.442778] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.442778] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.442930] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.443751] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.443755] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.443757] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.443757] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.443784] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.443953] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.444750] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.444761] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.444761] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.444761] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.444761] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.444761] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.444761] pci 0000:01:00.0: enabling Extended Tags [ 0.444815] pci 0000:01:00.0: supports D1 D2 [ 0.444976] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.445150] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.445155] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.445731] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.445731] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.445731] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.445731] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.445837] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.445892] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.446144] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.446808] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.446808] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.446808] pci_bus 0000:03: extended config space not accessible [ 0.446808] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.446835] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.446857] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.446879] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.447731] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.447731] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.447731] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.447731] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.447731] pci_bus 0000:00: on NUMA node 0 [ 0.447731] xen: registering gsi 13 triggering 1 polarity 0 [ 0.449621] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.450833] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.451099] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.451361] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.451628] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.451826] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.452088] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.452351] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.452610] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.452823] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.453085] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.453338] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.453599] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.453823] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.454112] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.454381] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.454642] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.454831] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.455120] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.455385] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.455669] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.455836] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.456105] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.456390] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.456649] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.456828] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.457085] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.457368] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.457631] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.457829] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.458124] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.458385] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.458851] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.459161] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.459507] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.459845] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.460142] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.460445] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.460762] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.461085] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.461845] xen:balloon: Initialising balloon driver [ 0.461917] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.461942] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.462223] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.462395] vgaarb: loaded [ 0.462903] SCSI subsystem initialized [ 0.463783] libata version 3.00 loaded. [ 0.463843] ACPI: bus type USB registered [ 0.464048] usbcore: registered new interface driver usbfs [ 0.464048] usbcore: registered new interface driver hub [ 0.464048] usbcore: registered new device driver usb [ 0.464234] pps_core: LinuxPPS API ver. 1 registered [ 0.464771] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.464771] PTP clock support registered [ 0.465016] EDAC MC: Ver: 3.0.0 [ 0.465933] Advanced Linux Sound Architecture Driver Initialized. [ 0.466773] PCI: Using ACPI for IRQ routing [ 0.471807] PCI: pci_cache_line_size set to 64 bytes [ 0.471977] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.472181] Expanded resource Reserved due to conflict with Reserved [ 0.472361] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.472364] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.472596] NetLabel: Initializing [ 0.472732] NetLabel: domain hash size = 128 [ 0.472897] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.473109] NetLabel: unlabeled traffic allowed by default [ 0.473774] clocksource: Switched to clocksource tsc-early [ 0.488469] VFS: Disk quotas dquot_6.6.0 [ 0.488720] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.488992] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.489354] pnp: PnP ACPI init [ 0.489840] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.489878] xen: registering gsi 8 triggering 1 polarity 0 [ 0.489922] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.490390] xen: registering gsi 4 triggering 1 polarity 0 [ 0.490392] Already setup the GSI :4 [ 0.490679] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.491095] xen: registering gsi 3 triggering 1 polarity 0 [ 0.491208] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.492767] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.492942] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.493112] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.493287] system 00:04: [io 0x0dff] has been reserved [ 0.493463] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.493643] system 00:04: [io 0x0eff] has been reserved [ 0.493819] system 00:04: [io 0x040b] has been reserved [ 0.494015] system 00:04: [io 0x04d6] has been reserved [ 0.494212] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.494386] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.494559] system 00:04: [io 0x0c14] has been reserved [ 0.494727] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.494908] system 00:04: [io 0x0c6c] has been reserved [ 0.495078] system 00:04: [io 0x0c6f] has been reserved [ 0.495278] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.495463] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.495639] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.495816] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.495985] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.496156] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.496332] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.496530] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.496706] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.496930] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.497104] system 00:04: [io 0x0950] has been reserved [ 0.497286] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.497379] pnp 00:05: [irq 0 disabled] [ 0.497435] system 00:05: [io 0x0ca8] has been reserved [ 0.497636] system 00:05: [io 0x0cac] has been reserved [ 0.497826] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.499253] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.499450] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499754] pnp: PnP ACPI: found 7 devices [ 0.513459] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.513754] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.513925] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.514101] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.514300] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.514477] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.514663] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.514881] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.515062] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.515354] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.515356] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.515357] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.515359] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.515361] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.515362] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.515364] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.515365] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.515367] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.515368] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.515369] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.515371] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.515372] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.515374] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.515376] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.515377] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.515379] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.515380] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.515381] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.515383] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.515384] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.515385] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.515387] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.515388] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.515390] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.515391] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.515392] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.515510] NET: Registered protocol family 2 [ 0.515876] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.516179] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.516398] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.516594] TCP: Hash tables configured (established 4096 bind 4096) [ 0.518861] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.519053] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.519295] NET: Registered protocol family 1 [ 0.520228] RPC: Registered named UNIX socket transport module. [ 0.520411] RPC: Registered udp transport module. [ 0.520588] RPC: Registered tcp transport module. [ 0.520777] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.521372] xen: registering gsi 16 triggering 0 polarity 1 [ 0.521429] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.650055] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 125763 usecs [ 0.650454] xen: registering gsi 16 triggering 0 polarity 1 [ 0.650470] Already setup the GSI :16 [ 0.650833] xen: registering gsi 17 triggering 0 polarity 1 [ 0.650897] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.651078] xen: registering gsi 18 triggering 0 polarity 1 [ 0.651092] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.651258] xen: registering gsi 18 triggering 0 polarity 1 [ 0.651260] Already setup the GSI :18 [ 0.651590] xen: registering gsi 19 triggering 0 polarity 1 [ 0.651611] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.651812] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.652093] PCI: CLS 64 bytes, default 64 [ 0.652197] Unpacking initramfs... [ 1.086410] Freeing initrd memory: 25900K [ 1.086866] kvm: no hardware support [ 1.087034] has_svm: svm not available [ 1.087196] kvm: no hardware support [ 1.089775] Scanning for low memory corruption every 60 seconds [ 1.091368] Initialise system trusted keyrings [ 1.091637] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.094120] NFS: Registering the id_resolver key type [ 1.094304] Key type id_resolver registered [ 1.094467] Key type id_legacy registered [ 1.099539] Key type asymmetric registered [ 1.099755] Asymmetric key parser 'x509' registered [ 1.099988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.100263] io scheduler noop registered [ 1.100434] io scheduler deadline registered [ 1.100754] io scheduler cfq registered (default) [ 1.100922] io scheduler mq-deadline registered [ 1.101114] io scheduler kyber registered [ 1.102099] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.102305] xen: registering gsi 52 triggering 0 polarity 0 [ 1.102406] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.102821] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.102989] xen: registering gsi 53 triggering 0 polarity 0 [ 1.103004] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.103303] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.103549] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.103980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.104287] ACPI: Power Button [PWRF] [ 1.105203] Warning: Processor Platform Limit not supported. [ 1.105692] xen:xen_evtchn: Event-channel device installed [ 1.105992] xen_pciback: backend is vpci [ 1.107025] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.128437] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.129888] hpet_acpi_add: no address or irqs in _CRS [ 1.130195] Non-volatile memory driver v1.3 [ 1.134824] loop: module loaded [ 1.141525] ahci 0000:00:11.0: version 3.0 [ 1.141765] xen: registering gsi 22 triggering 0 polarity 1 [ 1.141805] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.141984] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.142323] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.143588] scsi host0: ahci [ 1.144157] scsi host1: ahci [ 1.144875] scsi host2: ahci [ 1.145339] scsi host3: ahci [ 1.145634] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.145962] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.146314] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.146586] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.147159] tun: Universal TUN/TAP device driver, 1.6 [ 1.147507] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.147715] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.147924] sky2: driver version 1.30 [ 1.148192] xen_netfront: Initialising Xen virtual ethernet driver [ 1.148564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.148808] ehci-pci: EHCI PCI platform driver [ 1.149193] xen: registering gsi 17 triggering 0 polarity 1 [ 1.149221] Already setup the GSI :17 [ 1.149482] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.149778] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.150082] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.150416] ehci-pci 0000:00:12.2: debug port 1 [ 1.150818] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.157810] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.158072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.158354] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.158657] usb usb1: Product: EHCI Host Controller [ 1.158895] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.159065] usb usb1: SerialNumber: 0000:00:12.2 [ 1.159594] hub 1-0:1.0: USB hub found [ 1.159805] hub 1-0:1.0: 6 ports detected [ 1.160407] xen: registering gsi 19 triggering 0 polarity 1 [ 1.160423] Already setup the GSI :19 [ 1.160661] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.160960] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.161248] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.161589] ehci-pci 0000:00:13.2: debug port 1 [ 1.161927] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.169864] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.170161] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.170443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.170760] usb usb2: Product: EHCI Host Controller [ 1.170928] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.171096] usb usb2: SerialNumber: 0000:00:13.2 [ 1.171633] hub 2-0:1.0: USB hub found [ 1.171815] hub 2-0:1.0: 6 ports detected [ 1.172264] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.172460] ohci-pci: OHCI PCI platform driver [ 1.172855] xen: registering gsi 16 triggering 0 polarity 1 [ 1.172870] Already setup the GSI :16 [ 1.173100] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.173476] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.173879] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.230940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.231267] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.231542] usb usb3: Product: OHCI PCI host controller [ 1.231709] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.231914] usb usb3: SerialNumber: 0000:00:12.0 [ 1.232517] hub 3-0:1.0: USB hub found [ 1.232694] hub 3-0:1.0: 3 ports detected [ 1.233212] xen: registering gsi 16 triggering 0 polarity 1 [ 1.233231] Already setup the GSI :16 [ 1.233500] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.233865] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.234229] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.289924] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.290250] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.290587] usb usb4: Product: OHCI PCI host controller [ 1.290772] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.290943] usb usb4: SerialNumber: 0000:00:12.1 [ 1.291491] hub 4-0:1.0: USB hub found [ 1.291696] hub 4-0:1.0: 3 ports detected [ 1.292208] xen: registering gsi 18 triggering 0 polarity 1 [ 1.292222] Already setup the GSI :18 [ 1.292456] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.292829] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.293290] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.349920] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.350315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.350586] usb usb5: Product: OHCI PCI host controller [ 1.350770] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.350939] usb usb5: SerialNumber: 0000:00:13.0 [ 1.351543] hub 5-0:1.0: USB hub found [ 1.351717] hub 5-0:1.0: 3 ports detected [ 1.352264] xen: registering gsi 18 triggering 0 polarity 1 [ 1.352280] Already setup the GSI :18 [ 1.352513] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.352876] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.353261] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.408923] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.409248] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.409521] usb usb6: Product: OHCI PCI host controller [ 1.409740] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.409909] usb usb6: SerialNumber: 0000:00:13.1 [ 1.410454] hub 6-0:1.0: USB hub found [ 1.410633] hub 6-0:1.0: 3 ports detected [ 1.411010] uhci_hcd: USB Universal Host Controller Interface driver [ 1.411289] usbcore: registered new interface driver usblp [ 1.411522] usbcore: registered new interface driver usb-storage [ 1.411757] i8042: PNP: No PS/2 controller found. [ 1.411923] i8042: Probing ports directly. [ 1.415054] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.415310] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.415898] rtc_cmos 00:01: RTC can wake from S4 [ 1.416404] rtc_cmos 00:01: registered as rtc0 [ 1.416642] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.416958] device-mapper: uevent: version 1.0.3 [ 1.417311] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.417669] hidraw: raw HID events driver (C) Jiri Kosina [ 1.418175] usbcore: registered new interface driver usbhid [ 1.420402] usbhid: USB HID core driver [ 1.421938] Initializing XFRM netlink socket [ 1.422359] NET: Registered protocol family 10 [ 1.422940] Segment Routing with IPv6 [ 1.423796] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.424177] NET: Registered protocol family 17 [ 1.424359] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.424693] Key type dns_resolver registered [ 1.426164] mce: Using 2 MCE banks [ 1.426396] Using IPI No-Shortcut mode [ 1.426563] sched_clock: Marking stable (1391087834, 34991184)->(1431154507, -5075489) [ 1.427971] registered taskstats version 1 [ 1.428135] Loading compiled-in X.509 certificates [ 1.428749] Magic number: 13:150:804 [ 1.429204] console [netcon0] enabled [ 1.429369] netconsole: network logging started [ 1.429605] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.440320] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.440649] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.440956] cfg80211: failed to load regulatory.db [ 1.441171] ALSA device list: [ 1.441330] No soundcards found. [ 1.454826] ata3: SATA link down (SStatus 0 SControl 300) [ 1.455079] ata4: SATA link down (SStatus 0 SControl 300) [ 1.455762] ata1: SATA link down (SStatus 0 SControl 300) [ 1.455966] ata2: SATA link down (SStatus 0 SControl 300) [ 1.457062] Freeing unused kernel image memory: 840K [ 1.463867] Write protecting the kernel text: 9000k [ 1.464646] Write protecting the kernel read-only data: 2360k [ 1.464829] NX-protecting the kernel data: 5336k [ 1.465725] Run /init as init process [ 1.466953] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.597852] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.598163] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.599142] hub 1-3:1.0: USB hub found [ 1.599476] hub 1-3:1.0: 4 ports detected [ 1.624978] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.625540] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.625707] xen: registering gsi 48 triggering 0 polarity 0 [ 1.625760] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.626535] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.627007] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.627174] xen: registering gsi 49 triggering 0 polarity 0 [ 1.627192] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.627934] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.631467] mpt3sas version 26.100.00.00 loaded [ 1.631867] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.632682] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.632901] xen: registering gsi 24 triggering 0 polarity 0 [ 1.632953] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.633008] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.637598] random: crng init done [ 1.672633] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.673044] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.673618] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.673810] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x4b8ed8b3), size(65536) [ 1.674106] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 1.729487] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.729831] mpt2sas_cm0: sending diag reset !! [ 2.066897] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c6447594, max_idle_ns: 440795205105 ns [ 2.067476] clocksource: Switched to clocksource tsc [ 3.032387] mpt2sas_cm0: diag reset: SUCCESS [ 3.078103] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.078366] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.078639] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.127183] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.127590] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.127611] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.128211] mpt2sas_cm0: Protocol=( [ 3.128212] Initiator [ 3.128370] ,Target [ 3.128523] ), [ 3.128675] Capabilities=( [ 3.128882] Raid [ 3.129034] ,TLR [ 3.129186] ,EEDP [ 3.129336] ,Snapshot Buffer [ 3.129487] ,Diag Trace Buffer [ 3.129642] ,Task Set Full [ 3.129803] ,NCQ [ 3.129961] ) [ 3.130529] scsi host4: Fusion MPT SAS Host [ 3.143586] mpt2sas_cm0: sending port enable !! [ 4.709082] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 10.835800] mpt2sas_cm0: port enable: SUCCESS [ 10.837652] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 10.837962] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 10.838236] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 10.838528] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 10.839934] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 10.841186] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.938050] sd 4:0:0:0: [sda] Write Protect is off [ 10.938253] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 10.938852] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.013215] sda: sda1 sda2 < sda5 > [ 11.089161] sd 4:0:0:0: [sda] Attached SCSI disk [ 11.901211] PM: Image not found (code -22) [ 12.303452] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.656167] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.074733] systemd-udevd[1519]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.382499] systemd-udevd[1532]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.382558] systemd-udevd[1545]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.399969] systemd-udevd[1534]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.399989] systemd-udevd[1533]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.415406] systemd-udevd[1532]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.415547] systemd-udevd[1545]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.415557] systemd-udevd[1534]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.415559] systemd-udevd[1533]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.678651] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.861590] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.925004] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 16.994500] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.553067] systemd-udevd[1530]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.557518] xenbr0: port 1(eth0) entered blocking state [ 17.557703] xenbr0: port 1(eth0) entered disabled state [ 17.557937] device eth0 entered promiscuous mode [ 17.638065] bnx2 0000:02:00.0 eth0: using MSIX [ 17.645029] xenbr0: port 1(eth0) entered blocking state [ 17.645236] xenbr0: port 1(eth0) entered forwarding state [ 17.645420] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready