[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nocera0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:57:12 UTC 2021 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.037791] tsc: Fast TSC calibration using PIT [ 0.037796] tsc: Detected 2799.826 MHz processor [ 0.037797] tsc: Detected 2800.028 MHz TSC [ 0.060071] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.060076] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.060082] last_pfn = 0x20062 max_arch_pfn = 0x1000000 [ 0.060086] Disabled [ 0.060088] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.060094] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.060136] Scanning 1 areas for low memory corruption [ 0.060138] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.060451] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.209335] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.209470] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.209518] RAMDISK: [mem 0x04000000-0x0594afff] [ 0.209542] ACPI: Early table checksum verification disabled [ 0.224275] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.224286] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224341] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.224459] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.224471] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.224481] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.224491] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.224503] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224514] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224526] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224537] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224550] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224560] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224572] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224583] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224595] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224607] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224619] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.224631] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.224642] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.224655] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.224668] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.224707] ACPI: Local APIC address 0xfee00000 [ 0.224710] Switched to APIC driver `Xen PV'. [ 0.224760] 0MB HIGHMEM available. [ 0.224763] 512MB LOWMEM available. [ 0.224765] mapped low ram: 0 - 20062000 [ 0.224766] low ram: 0 - 20062000 [ 0.224771] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.224794] Zone ranges: [ 0.224796] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.224799] Normal [mem 0x0000000001000000-0x0000000020061fff] [ 0.224801] HighMem empty [ 0.224803] Movable zone start for each node [ 0.224804] Early memory node ranges [ 0.224806] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.224807] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.224810] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.224813] On node 0 totalpages: 131071 [ 0.226988] DMA zone: 32 pages used for memmap [ 0.226991] DMA zone: 0 pages reserved [ 0.226993] DMA zone: 3997 pages, LIFO batch:0 [ 0.227094] Normal zone: 993 pages used for memmap [ 0.227095] Normal zone: 127074 pages, LIFO batch:31 [ 0.229901] p2m virtual area at (ptrval), size is 400000 [ 0.230479] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.231383] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.232632] Remapped 98 page(s) [ 0.232636] Using APIC driver Xen PV [ 0.233081] ACPI: PM-Timer IO Port: 0x808 [ 0.233087] ACPI: Local APIC address 0xfee00000 [ 0.233088] Switched to APIC driver `Xen PV'. [ 0.233278] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.233335] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.233344] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.233378] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.233387] ACPI: IRQ0 used by override. [ 0.233389] ACPI: IRQ9 used by override. [ 0.233424] Using ACPI (MADT) for SMP configuration information [ 0.233429] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.233435] ACPI: SPCR: SPCR table version 1 [ 0.233441] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.233450] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.233473] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.233475] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.233477] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.233481] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.233487] Booting paravirtualized kernel on Xen [ 0.233488] Xen version: 4.16-rc (preserve-AD) [ 0.233495] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.233517] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.233526] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.234253] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.234261] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.234263] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.234376] xen: PV spinlocks enabled [ 0.234381] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.234389] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.234392] Kernel command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.234682] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.234752] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.234837] Initializing CPU#0 [ 0.325660] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.325674] Initializing HighMem for node 0 (00000000:00000000) [ 0.328822] Memory: 411488K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 112796K reserved, 0K cma-reserved, 0K highmem) [ 0.328830] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0862000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0062000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.328835] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.328975] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.329191] rcu: Hierarchical RCU implementation. [ 0.329193] rcu: RCU event tracing is enabled. [ 0.329516] Using NULL legacy PIC [ 0.329519] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.329598] xen:events: Using FIFO-based ABI [ 0.329615] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.329655] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.329660] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.329665] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.329669] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.329673] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.329677] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.329680] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.329685] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.329689] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.329693] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.329702] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.329707] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.329711] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.329715] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.329719] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.336496] Console: colour VGA+ 80x25 [ 0.356229] console [tty0] enabled [ 0.356814] console [hvc0] enabled [ 0.356988] ACPI: Core revision 20180810 [ 0.363881] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.364175] Xen: using vcpuop timer interface [ 0.364185] installing Xen timer for CPU 0 [ 0.364450] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c5b21aa5, max_idle_ns: 440795251274 ns [ 0.364811] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.05 BogoMIPS (lpj=2800028) [ 0.365099] pid_max: default: 32768 minimum: 301 [ 0.365293] Security Framework initialized [ 0.365781] SELinux: Initializing. [ 0.365980] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.366159] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.366724] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.366769] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.366947] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.367227] Spectre V2 : Mitigation: Full AMD retpoline [ 0.367423] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.367991] Freeing SMP alternatives memory: 36K [ 0.371004] cpu 0 spinlock event irq 57 [ 0.371183] VPMU disabled by hypervisor. [ 0.371561] Performance Events: PMU not available due to virtualization, using software events only. [ 0.371863] rcu: Hierarchical SRCU implementation. [ 0.372279] smp: Bringing up secondary CPUs ... [ 0.372595] installing Xen timer for CPU 1 [ 0.372831] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036033] Initializing CPU#1 [ 0.373155] cpu 1 spinlock event irq 69 [ 0.373935] installing Xen timer for CPU 2 [ 0.374172] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036033] Initializing CPU#2 [ 0.374503] cpu 2 spinlock event irq 76 [ 0.374880] installing Xen timer for CPU 3 [ 0.375091] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036033] Initializing CPU#3 [ 0.375358] cpu 3 spinlock event irq 83 [ 0.375915] installing Xen timer for CPU 4 [ 0.376139] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036033] Initializing CPU#4 [ 0.376874] cpu 4 spinlock event irq 90 [ 0.377205] installing Xen timer for CPU 5 [ 0.377205] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036033] Initializing CPU#5 [ 0.377972] cpu 5 spinlock event irq 97 [ 0.378203] installing Xen timer for CPU 6 [ 0.378832] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036033] Initializing CPU#6 [ 0.379071] cpu 6 spinlock event irq 104 [ 0.379850] installing Xen timer for CPU 7 [ 0.380085] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036033] Initializing CPU#7 [ 0.380381] cpu 7 spinlock event irq 111 [ 0.380772] smp: Brought up 1 node, 8 CPUs [ 0.380938] smpboot: Max logical packages: 1 [ 0.381772] devtmpfs: initialized [ 0.383005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.383318] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.383798] RTC time: 14:50:11, date: 11/23/21 [ 0.384175] NET: Registered protocol family 16 [ 0.384407] xen:grant_table: Grant tables using version 1 layout [ 0.384647] Grant table initialized [ 0.385140] audit: initializing netlink subsys (disabled) [ 0.385343] audit: type=2000 audit(1637679011.453:1): state=initialized audit_enabled=0 res=1 [ 0.385898] node 0 link 1: io port [e000, ffff] [ 0.385911] TOM: 00000000c0000000 aka 3072M [ 0.386091] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.386097] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.386107] node 0 link 1: mmio [fec80000, fecbffff] [ 0.386112] TOM2: 0000000840000000 aka 33792M [ 0.386286] bus: [bus 00-3f] on node 0 link 1 [ 0.386287] bus: 00 [io 0x0000-0xffff] [ 0.386288] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.386289] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.386290] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.386915] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.387194] ACPI: bus type PCI registered [ 0.387872] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.387872] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.387872] PCI: Using MMCONFIG for extended config space [ 0.387872] PCI: Using configuration type 1 for base access [ 0.391996] random: fast init done [ 0.393952] ACPI: Added _OSI(Module Device) [ 0.394204] ACPI: Added _OSI(Processor Device) [ 0.394369] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.394771] ACPI: Added _OSI(Processor Aggregator Device) [ 0.394946] ACPI: Added _OSI(Linux-Dell-Video) [ 0.395109] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.398269] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.398765] xen: registering gsi 9 triggering 0 polarity 1 [ 0.398765] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.403308] ACPI: Interpreter enabled [ 0.403505] ACPI: (supports S0 S4 S5) [ 0.403668] ACPI: Using IOAPIC for interrupt routing [ 0.403848] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.404439] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.423372] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.423623] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.424534] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.424770] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.427185] PCI host bridge to bus 0000:00 [ 0.427352] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.427564] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.427741] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.427770] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.427956] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.428132] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.428405] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.428677] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.428770] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.429063] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.429335] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.429603] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.429805] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.430183] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.430831] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.430831] pci 0000:00:02.0: enabling Extended Tags [ 0.430831] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.430936] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.431009] pci 0000:00:09.0: enabling Extended Tags [ 0.431256] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.431424] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.431470] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.431490] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.431509] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.431528] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.431546] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.431565] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.431609] pci 0000:00:11.0: set SATA to AHCI mode [ 0.431932] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.431969] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.432179] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.432216] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.432786] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.432786] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.432786] pci 0000:00:12.2: supports D1 D2 [ 0.432786] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.432809] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.432847] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.433056] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.433092] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.433308] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.433351] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.433521] pci 0000:00:13.2: supports D1 D2 [ 0.433523] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.433782] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.434023] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.434064] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.434083] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.434103] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.434122] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.434140] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.434325] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.434798] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.434798] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.434978] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.435136] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.435288] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.435791] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.435801] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.435816] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.435969] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.436120] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.436299] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.436794] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.436794] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.436794] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.436794] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.436794] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.436794] pci 0000:01:00.0: enabling Extended Tags [ 0.436883] pci 0000:01:00.0: supports D1 D2 [ 0.437008] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.437186] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.437192] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.437305] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.437382] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.437604] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.437666] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.437876] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.437926] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.438148] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.438323] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.438529] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.438561] pci_bus 0000:03: extended config space not accessible [ 0.438799] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.438825] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.438846] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.438867] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.439149] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.439357] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.439364] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.439366] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.439367] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.439368] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.439370] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.439371] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.439373] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.439374] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.439375] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.439377] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.439378] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.439379] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.439419] pci_bus 0000:00: on NUMA node 0 [ 0.439553] xen: registering gsi 13 triggering 1 polarity 0 [ 0.441647] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.441846] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.442138] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.442407] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.442668] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.442866] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.443138] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.443404] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.443671] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.443863] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.444130] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.444423] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.444705] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.444860] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.445127] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.445410] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.445673] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.445862] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.446121] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.446390] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.446657] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.446864] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.447162] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.447423] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.447702] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.447863] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.448125] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.448421] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.448684] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.448870] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.449134] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.449399] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.449882] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.450194] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.450503] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.450811] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.451172] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.451477] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.451783] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.452086] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.452832] xen:balloon: Initialising balloon driver [ 0.452926] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.452982] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.453283] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.453460] vgaarb: loaded [ 0.454770] SCSI subsystem initialized [ 0.454841] libata version 3.00 loaded. [ 0.454869] ACPI: bus type USB registered [ 0.454920] usbcore: registered new interface driver usbfs [ 0.454998] usbcore: registered new interface driver hub [ 0.455803] usbcore: registered new device driver usb [ 0.455803] pps_core: LinuxPPS API ver. 1 registered [ 0.455803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.455814] PTP clock support registered [ 0.456834] EDAC MC: Ver: 3.0.0 [ 0.457189] Advanced Linux Sound Architecture Driver Initialized. [ 0.457189] PCI: Using ACPI for IRQ routing [ 0.461956] PCI: pci_cache_line_size set to 64 bytes [ 0.462107] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.462284] Expanded resource Reserved due to conflict with Reserved [ 0.462465] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.462468] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.462771] NetLabel: Initializing [ 0.462771] NetLabel: domain hash size = 128 [ 0.462968] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.463180] NetLabel: unlabeled traffic allowed by default [ 0.464795] clocksource: Switched to clocksource tsc-early [ 0.479535] VFS: Disk quotas dquot_6.6.0 [ 0.479819] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.480037] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.480383] pnp: PnP ACPI init [ 0.480838] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.480876] xen: registering gsi 8 triggering 1 polarity 0 [ 0.480915] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.481366] xen: registering gsi 4 triggering 1 polarity 0 [ 0.481368] Already setup the GSI :4 [ 0.481644] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.482052] xen: registering gsi 3 triggering 1 polarity 0 [ 0.482159] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.483674] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.483855] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.484030] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.484200] system 00:04: [io 0x0dff] has been reserved [ 0.484377] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.484574] system 00:04: [io 0x0eff] has been reserved [ 0.484764] system 00:04: [io 0x040b] has been reserved [ 0.484951] system 00:04: [io 0x04d6] has been reserved [ 0.485119] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.485290] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.485460] system 00:04: [io 0x0c14] has been reserved [ 0.485627] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.485828] system 00:04: [io 0x0c6c] has been reserved [ 0.486002] system 00:04: [io 0x0c6f] has been reserved [ 0.486208] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.486387] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.486559] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.486731] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.486908] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.487108] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.487282] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.487460] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.487656] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.487836] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.488007] system 00:04: [io 0x0950] has been reserved [ 0.488189] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.488292] pnp 00:05: [irq 0 disabled] [ 0.488334] system 00:05: [io 0x0ca8] has been reserved [ 0.488506] system 00:05: [io 0x0cac] has been reserved [ 0.488686] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.490107] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.490300] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.490587] pnp: PnP ACPI: found 7 devices [ 0.503665] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.503956] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.504160] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.504348] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.504534] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.504707] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.504898] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.505073] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.505253] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.505576] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.505578] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.505580] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.505581] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.505583] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.505584] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.505586] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.505587] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.505589] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.505590] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.505591] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.505593] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.505594] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.505596] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.505598] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.505599] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.505601] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.505602] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.505603] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.505605] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.505606] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.505607] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.505609] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.505610] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.505611] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.505613] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.505614] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.505727] NET: Registered protocol family 2 [ 0.506140] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.506424] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.506642] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.506855] TCP: Hash tables configured (established 4096 bind 4096) [ 0.509163] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.509347] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.509580] NET: Registered protocol family 1 [ 0.510264] RPC: Registered named UNIX socket transport module. [ 0.510450] RPC: Registered udp transport module. [ 0.510617] RPC: Registered tcp transport module. [ 0.510802] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.511476] xen: registering gsi 16 triggering 0 polarity 1 [ 0.511538] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.640032] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 125676 usecs [ 0.640420] xen: registering gsi 16 triggering 0 polarity 1 [ 0.640434] Already setup the GSI :16 [ 0.640804] xen: registering gsi 17 triggering 0 polarity 1 [ 0.640864] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.641067] xen: registering gsi 18 triggering 0 polarity 1 [ 0.641081] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.641239] xen: registering gsi 18 triggering 0 polarity 1 [ 0.641241] Already setup the GSI :18 [ 0.641590] xen: registering gsi 19 triggering 0 polarity 1 [ 0.641601] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.641794] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.642074] PCI: CLS 64 bytes, default 64 [ 0.642199] Unpacking initramfs... [ 1.067975] Freeing initrd memory: 25900K [ 1.068374] kvm: no hardware support [ 1.068567] has_svm: svm not available [ 1.068733] kvm: no hardware support [ 1.071716] Scanning for low memory corruption every 60 seconds [ 1.073404] Initialise system trusted keyrings [ 1.073686] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.076248] NFS: Registering the id_resolver key type [ 1.076426] Key type id_resolver registered [ 1.076589] Key type id_legacy registered [ 1.082129] Key type asymmetric registered [ 1.082367] Asymmetric key parser 'x509' registered [ 1.082598] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.082883] io scheduler noop registered [ 1.083047] io scheduler deadline registered [ 1.083368] io scheduler cfq registered (default) [ 1.083538] io scheduler mq-deadline registered [ 1.083741] io scheduler kyber registered [ 1.084713] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.084900] xen: registering gsi 52 triggering 0 polarity 0 [ 1.084947] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.085319] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.085486] xen: registering gsi 53 triggering 0 polarity 0 [ 1.085504] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.085809] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.086026] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.086427] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.086749] ACPI: Power Button [PWRF] [ 1.087684] Warning: Processor Platform Limit not supported. [ 1.088215] xen:xen_evtchn: Event-channel device installed [ 1.088549] xen_pciback: backend is vpci [ 1.089705] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.111201] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.112498] hpet_acpi_add: no address or irqs in _CRS [ 1.112846] Non-volatile memory driver v1.3 [ 1.117487] loop: module loaded [ 1.123797] ahci 0000:00:11.0: version 3.0 [ 1.123979] xen: registering gsi 22 triggering 0 polarity 1 [ 1.124027] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.124207] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.124508] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.125740] scsi host0: ahci [ 1.126303] scsi host1: ahci [ 1.126785] scsi host2: ahci [ 1.127235] scsi host3: ahci [ 1.127539] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.127823] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.128126] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.128433] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.128987] tun: Universal TUN/TAP device driver, 1.6 [ 1.129329] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.129549] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.129746] sky2: driver version 1.30 [ 1.130028] xen_netfront: Initialising Xen virtual ethernet driver [ 1.130414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.130591] ehci-pci: EHCI PCI platform driver [ 1.130967] xen: registering gsi 17 triggering 0 polarity 1 [ 1.130980] Already setup the GSI :17 [ 1.131232] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.131538] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.131830] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.132167] ehci-pci 0000:00:12.2: debug port 1 [ 1.132537] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.139846] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.140133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.140415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.140744] usb usb1: Product: EHCI Host Controller [ 1.140932] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.141100] usb usb1: SerialNumber: 0000:00:12.2 [ 1.141624] hub 1-0:1.0: USB hub found [ 1.141828] hub 1-0:1.0: 6 ports detected [ 1.142426] xen: registering gsi 19 triggering 0 polarity 1 [ 1.142443] Already setup the GSI :19 [ 1.142680] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.142969] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.143252] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.143558] ehci-pci 0000:00:13.2: debug port 1 [ 1.143894] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.151840] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.152128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.152406] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.152679] usb usb2: Product: EHCI Host Controller [ 1.152877] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.153081] usb usb2: SerialNumber: 0000:00:13.2 [ 1.153640] hub 2-0:1.0: USB hub found [ 1.153820] hub 2-0:1.0: 6 ports detected [ 1.154279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.154510] ohci-pci: OHCI PCI platform driver [ 1.154854] xen: registering gsi 16 triggering 0 polarity 1 [ 1.154863] Already setup the GSI :16 [ 1.155092] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.155431] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.155853] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.211967] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.212286] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.212565] usb usb3: Product: OHCI PCI host controller [ 1.212795] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.212965] usb usb3: SerialNumber: 0000:00:12.0 [ 1.213462] hub 3-0:1.0: USB hub found [ 1.213633] hub 3-0:1.0: 3 ports detected [ 1.214156] xen: registering gsi 16 triggering 0 polarity 1 [ 1.214169] Already setup the GSI :16 [ 1.214404] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.214721] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.215106] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.270940] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.271297] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.271574] usb usb4: Product: OHCI PCI host controller [ 1.271744] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.271930] usb usb4: SerialNumber: 0000:00:12.1 [ 1.272432] hub 4-0:1.0: USB hub found [ 1.272628] hub 4-0:1.0: 3 ports detected [ 1.273137] xen: registering gsi 18 triggering 0 polarity 1 [ 1.273152] Already setup the GSI :18 [ 1.273389] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.273711] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.274130] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.329971] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.330294] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.330599] usb usb5: Product: OHCI PCI host controller [ 1.330777] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.330945] usb usb5: SerialNumber: 0000:00:13.0 [ 1.331452] hub 5-0:1.0: USB hub found [ 1.331629] hub 5-0:1.0: 3 ports detected [ 1.332128] xen: registering gsi 18 triggering 0 polarity 1 [ 1.332143] Already setup the GSI :18 [ 1.332397] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.332718] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.333105] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.388960] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.389281] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.389554] usb usb6: Product: OHCI PCI host controller [ 1.389748] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.389943] usb usb6: SerialNumber: 0000:00:13.1 [ 1.390506] hub 6-0:1.0: USB hub found [ 1.390682] hub 6-0:1.0: 3 ports detected [ 1.391072] uhci_hcd: USB Universal Host Controller Interface driver [ 1.391318] usbcore: registered new interface driver usblp [ 1.391549] usbcore: registered new interface driver usb-storage [ 1.391789] i8042: PNP: No PS/2 controller found. [ 1.391955] i8042: Probing ports directly. [ 1.395133] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.395354] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.395970] rtc_cmos 00:01: RTC can wake from S4 [ 1.396436] rtc_cmos 00:01: registered as rtc0 [ 1.396637] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.396938] device-mapper: uevent: version 1.0.3 [ 1.397287] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.397616] hidraw: raw HID events driver (C) Jiri Kosina [ 1.398053] usbcore: registered new interface driver usbhid [ 1.400284] usbhid: USB HID core driver [ 1.401917] Initializing XFRM netlink socket [ 1.402298] NET: Registered protocol family 10 [ 1.402883] Segment Routing with IPv6 [ 1.403641] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.404073] NET: Registered protocol family 17 [ 1.404273] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.404630] Key type dns_resolver registered [ 1.405903] mce: Using 2 MCE banks [ 1.406099] Using IPI No-Shortcut mode [ 1.406285] sched_clock: Marking stable (1370781270, 35033180)->(1411879936, -6065486) [ 1.407633] registered taskstats version 1 [ 1.407824] Loading compiled-in X.509 certificates [ 1.408379] Magic number: 13:33:840 [ 1.408791] console [netcon0] enabled [ 1.408953] netconsole: network logging started [ 1.409201] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.420323] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.420598] ALSA device list: [ 1.420756] No soundcards found. [ 1.421209] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.421518] cfg80211: failed to load regulatory.db [ 1.434858] ata3: SATA link down (SStatus 0 SControl 300) [ 1.435137] ata1: SATA link down (SStatus 0 SControl 300) [ 1.435416] ata4: SATA link down (SStatus 0 SControl 300) [ 1.435800] ata2: SATA link down (SStatus 0 SControl 300) [ 1.436961] Freeing unused kernel image memory: 840K [ 1.438900] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.445905] Write protecting the kernel text: 9000k [ 1.446679] Write protecting the kernel read-only data: 2360k [ 1.446860] NX-protecting the kernel data: 5336k [ 1.447804] Run /init as init process [ 1.568075] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.568403] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.569410] hub 1-3:1.0: USB hub found [ 1.569700] hub 1-3:1.0: 4 ports detected [ 1.604080] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.604598] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.604810] xen: registering gsi 48 triggering 0 polarity 0 [ 1.604851] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.605620] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a7:02 [ 1.606139] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.606307] xen: registering gsi 49 triggering 0 polarity 0 [ 1.606323] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.607068] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a7:03 [ 1.609861] mpt3sas version 26.100.00.00 loaded [ 1.610286] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.611157] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.611335] xen: registering gsi 24 triggering 0 polarity 0 [ 1.611538] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.611585] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.655387] random: crng init done [ 1.658854] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.659220] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.659811] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.659988] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x2ab97562), size(65536) [ 1.660258] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 1.718895] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.719203] mpt2sas_cm0: sending diag reset !! [ 2.060886] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c5b21aa5, max_idle_ns: 440795251274 ns [ 2.061395] clocksource: Switched to clocksource tsc [ 3.020368] mpt2sas_cm0: diag reset: SUCCESS [ 3.066556] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.066843] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.067145] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.115610] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.116017] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.116041] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.116605] mpt2sas_cm0: Protocol=( [ 3.116606] Initiator [ 3.116801] ,Target [ 3.116981] ), [ 3.117135] Capabilities=( [ 3.117303] Raid [ 3.117457] ,TLR [ 3.117611] ,EEDP [ 3.117763] ,Snapshot Buffer [ 3.117922] ,Diag Trace Buffer [ 3.118081] ,Task Set Full [ 3.118263] ,NCQ [ 3.118419] ) [ 3.118960] scsi host4: Fusion MPT SAS Host [ 3.131851] mpt2sas_cm0: sending port enable !! [ 4.694628] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5600), phys(8) [ 10.823847] mpt2sas_cm0: port enable: SUCCESS [ 10.825714] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 10.825997] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002536ebe0) [ 10.826299] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5600), slot(0) [ 10.826589] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 10.827992] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 10.829232] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.902237] sd 4:0:0:0: [sda] Write Protect is off [ 10.902445] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 10.903040] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.972043] sda: sda1 sda2 < sda5 > [ 11.045000] sd 4:0:0:0: [sda] Attached SCSI disk [ 11.809205] PM: Image not found (code -22) [ 12.195553] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.489659] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.925158] systemd-udevd[1519]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.215127] systemd-udevd[1533]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.215152] systemd-udevd[1529]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.220612] systemd-udevd[1533]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.221189] systemd-udevd[1529]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.261646] systemd-udevd[1533]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.261755] systemd-udevd[1529]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.266869] systemd-udevd[1533]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.267430] systemd-udevd[1529]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.662427] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.886171] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.946806] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.019210] Adding 1949692k swap on /dev/mapper/nocera0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.648625] systemd-udevd[1533]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.653166] xenbr0: port 1(eth0) entered blocking state [ 17.653381] xenbr0: port 1(eth0) entered disabled state [ 17.653605] device eth0 entered promiscuous mode [ 17.748296] bnx2 0000:02:00.0 eth0: using MSIX [ 17.755255] xenbr0: port 1(eth0) entered blocking state [ 17.755473] xenbr0: port 1(eth0) entered forwarding state [ 17.755670] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready