[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nocera0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:57:12 UTC 2021 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031354] tsc: Fast TSC calibration using PIT [ 0.031359] tsc: Detected 2800.078 MHz processor [ 0.031360] tsc: Detected 2800.084 MHz TSC [ 0.053755] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053761] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053767] last_pfn = 0x20062 max_arch_pfn = 0x1000000 [ 0.053770] Disabled [ 0.053772] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053782] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053824] Scanning 1 areas for low memory corruption [ 0.053826] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.054148] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.204432] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.204569] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.204616] RAMDISK: [mem 0x04000000-0x0594afff] [ 0.204640] ACPI: Early table checksum verification disabled [ 0.219389] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.219400] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219455] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.219574] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.219587] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.219597] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.219606] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.219618] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219631] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219643] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219655] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219668] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219680] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219692] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219704] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219715] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219728] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219741] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.219752] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.219764] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.219775] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219788] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.219827] ACPI: Local APIC address 0xfee00000 [ 0.219829] Switched to APIC driver `Xen PV'. [ 0.219880] 0MB HIGHMEM available. [ 0.219883] 512MB LOWMEM available. [ 0.219884] mapped low ram: 0 - 20062000 [ 0.219885] low ram: 0 - 20062000 [ 0.219890] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.219911] Zone ranges: [ 0.219913] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.219916] Normal [mem 0x0000000001000000-0x0000000020061fff] [ 0.219918] HighMem empty [ 0.219919] Movable zone start for each node [ 0.219920] Early memory node ranges [ 0.219922] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.219924] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.219927] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.219931] On node 0 totalpages: 131071 [ 0.222118] DMA zone: 32 pages used for memmap [ 0.222120] DMA zone: 0 pages reserved [ 0.222122] DMA zone: 3997 pages, LIFO batch:0 [ 0.222229] Normal zone: 993 pages used for memmap [ 0.222230] Normal zone: 127074 pages, LIFO batch:31 [ 0.225108] p2m virtual area at (ptrval), size is 400000 [ 0.225694] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.226608] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.227861] Remapped 98 page(s) [ 0.227866] Using APIC driver Xen PV [ 0.228278] ACPI: PM-Timer IO Port: 0x808 [ 0.228285] ACPI: Local APIC address 0xfee00000 [ 0.228286] Switched to APIC driver `Xen PV'. [ 0.228469] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.228525] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.228533] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.228569] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.228576] ACPI: IRQ0 used by override. [ 0.228578] ACPI: IRQ9 used by override. [ 0.228609] Using ACPI (MADT) for SMP configuration information [ 0.228614] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.228621] ACPI: SPCR: SPCR table version 1 [ 0.228626] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.228636] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.228660] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.228662] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.228664] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.228667] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.228673] Booting paravirtualized kernel on Xen [ 0.228674] Xen version: 4.16-rc (preserve-AD) [ 0.228681] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.228703] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.228713] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229384] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.229394] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.229395] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.229505] xen: PV spinlocks enabled [ 0.229511] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.229520] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.229525] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.229805] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.229875] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.229959] Initializing CPU#0 [ 0.320760] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.320774] Initializing HighMem for node 0 (00000000:00000000) [ 0.323980] Memory: 411488K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 112796K reserved, 0K cma-reserved, 0K highmem) [ 0.323988] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0862000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0062000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.323993] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.324133] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.324350] rcu: Hierarchical RCU implementation. [ 0.324351] rcu: RCU event tracing is enabled. [ 0.324671] Using NULL legacy PIC [ 0.324674] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.324749] xen:events: Using FIFO-based ABI [ 0.324766] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.324811] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.324816] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.324820] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.324825] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.324829] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.324833] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.324837] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.324840] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.324844] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.324849] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.324856] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.324860] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.324864] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.324868] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.324873] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.331716] Console: colour VGA+ 80x25 [ 0.351437] console [tty0] enabled [ 0.352025] console [hvc0] enabled [ 0.352227] ACPI: Core revision 20180810 [ 0.359144] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.359429] Xen: using vcpuop timer interface [ 0.359439] installing Xen timer for CPU 0 [ 0.359723] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c9006ed6, max_idle_ns: 440795221488 ns [ 0.360059] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.16 BogoMIPS (lpj=2800084) [ 0.360346] pid_max: default: 32768 minimum: 301 [ 0.360541] Security Framework initialized [ 0.361027] SELinux: Initializing. [ 0.361222] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.361400] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.361933] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.362016] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.362218] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.362499] Spectre V2 : Mitigation: Full AMD retpoline [ 0.362667] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.363237] Freeing SMP alternatives memory: 36K [ 0.366280] cpu 0 spinlock event irq 57 [ 0.366459] VPMU disabled by hypervisor. [ 0.366808] Performance Events: PMU not available due to virtualization, using software events only. [ 0.367106] rcu: Hierarchical SRCU implementation. [ 0.367554] smp: Bringing up secondary CPUs ... [ 0.367841] installing Xen timer for CPU 1 [ 0.368074] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036128] Initializing CPU#1 [ 0.368467] cpu 1 spinlock event irq 69 [ 0.369170] installing Xen timer for CPU 2 [ 0.369397] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036128] Initializing CPU#2 [ 0.369733] cpu 2 spinlock event irq 76 [ 0.370134] installing Xen timer for CPU 3 [ 0.370349] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036128] Initializing CPU#3 [ 0.370610] cpu 3 spinlock event irq 83 [ 0.371130] installing Xen timer for CPU 4 [ 0.371341] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036128] Initializing CPU#4 [ 0.372014] cpu 4 spinlock event irq 90 [ 0.372148] installing Xen timer for CPU 5 [ 0.372380] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036128] Initializing CPU#5 [ 0.373093] cpu 5 spinlock event irq 97 [ 0.373433] installing Xen timer for CPU 6 [ 0.373433] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036128] Initializing CPU#6 [ 0.374158] cpu 6 spinlock event irq 104 [ 0.374478] installing Xen timer for CPU 7 [ 0.375069] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036128] Initializing CPU#7 [ 0.375347] cpu 7 spinlock event irq 111 [ 0.375499] smp: Brought up 1 node, 8 CPUs [ 0.376021] smpboot: Max logical packages: 1 [ 0.376446] devtmpfs: initialized [ 0.377535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.378026] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.378448] RTC time: 8:56:40, date: 11/23/21 [ 0.378812] NET: Registered protocol family 16 [ 0.379040] xen:grant_table: Grant tables using version 1 layout [ 0.379260] Grant table initialized [ 0.380390] audit: initializing netlink subsys (disabled) [ 0.380583] audit: type=2000 audit(1637657800.294:1): state=initialized audit_enabled=0 res=1 [ 0.381182] node 0 link 1: io port [e000, ffff] [ 0.381197] TOM: 00000000c0000000 aka 3072M [ 0.381378] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.381383] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.381393] node 0 link 1: mmio [fec80000, fecbffff] [ 0.381397] TOM2: 0000000840000000 aka 33792M [ 0.381563] bus: [bus 00-3f] on node 0 link 1 [ 0.381564] bus: 00 [io 0x0000-0xffff] [ 0.381566] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.381567] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.381568] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.382252] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.382539] ACPI: bus type PCI registered [ 0.383083] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.383366] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.383535] PCI: Using MMCONFIG for extended config space [ 0.383714] PCI: Using configuration type 1 for base access [ 0.386399] random: fast init done [ 0.390060] ACPI: Added _OSI(Module Device) [ 0.390060] ACPI: Added _OSI(Processor Device) [ 0.390060] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.390212] ACPI: Added _OSI(Processor Aggregator Device) [ 0.390380] ACPI: Added _OSI(Linux-Dell-Video) [ 0.390546] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.395040] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.395301] xen: registering gsi 9 triggering 0 polarity 1 [ 0.395763] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.399754] ACPI: Interpreter enabled [ 0.399974] ACPI: (supports S0 S4 S5) [ 0.400031] ACPI: Using IOAPIC for interrupt routing [ 0.400265] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.400884] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.419186] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.419388] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.420432] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.420704] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.423115] PCI host bridge to bus 0000:00 [ 0.423291] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.423463] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.423637] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.423811] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.424017] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.424188] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.424459] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.424730] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.425000] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.425021] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.425290] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.425558] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.425755] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.426099] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.426353] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.426437] pci 0000:00:02.0: enabling Extended Tags [ 0.426692] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.427092] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.427092] pci 0000:00:09.0: enabling Extended Tags [ 0.427094] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.427272] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.427321] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.427341] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.427360] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.427378] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.427397] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.427415] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.427461] pci 0000:00:11.0: set SATA to AHCI mode [ 0.428121] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.428121] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.428121] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.428121] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.428288] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.428332] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.428526] pci 0000:00:12.2: supports D1 D2 [ 0.428527] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.429033] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.429033] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.429033] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.429033] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.429146] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.429189] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.429356] pci 0000:00:13.2: supports D1 D2 [ 0.429358] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.430031] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.430031] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.430031] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.430031] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.430031] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.430031] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.430031] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.430107] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.430359] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.431039] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.431039] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.431039] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.431078] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.431251] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.432033] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.432046] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.432056] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.432056] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.432119] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.433040] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.433040] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.433040] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.433040] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.433040] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.433040] pci 0000:01:00.0: enabling Extended Tags [ 0.433040] pci 0000:01:00.0: supports D1 D2 [ 0.433040] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.433040] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.433040] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.433178] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.433229] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.433451] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.433512] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.434016] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.434016] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.434176] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.434350] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.434575] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.434604] pci_bus 0000:03: extended config space not accessible [ 0.435050] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.435050] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.435050] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.435050] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.435183] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.435375] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.435382] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.435384] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.435385] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.435387] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.435388] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.435390] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.435391] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.435392] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.435394] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.435395] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.435396] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.435398] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.435437] pci_bus 0000:00: on NUMA node 0 [ 0.435567] xen: registering gsi 13 triggering 1 polarity 0 [ 0.437591] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.437858] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.438111] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.438378] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.438678] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.438937] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.439112] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.439374] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.439637] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.439930] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.440113] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.440374] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.440632] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.440895] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.441109] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.441404] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.441671] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.441930] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.443109] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.443378] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.443644] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.443913] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.444107] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.444366] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.444643] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.444905] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.445112] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.445361] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.445628] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.445919] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.446109] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.446374] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.446817] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.447129] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.447474] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.447770] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.448094] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.448402] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.448715] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.449032] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.449543] xen:balloon: Initialising balloon driver [ 0.449879] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.449879] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.450044] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.450213] vgaarb: loaded [ 0.450512] SCSI subsystem initialized [ 0.451149] libata version 3.00 loaded. [ 0.451149] ACPI: bus type USB registered [ 0.451314] usbcore: registered new interface driver usbfs [ 0.451495] usbcore: registered new interface driver hub [ 0.452033] usbcore: registered new device driver usb [ 0.452049] pps_core: LinuxPPS API ver. 1 registered [ 0.452049] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.452380] PTP clock support registered [ 0.453145] EDAC MC: Ver: 3.0.0 [ 0.454117] Advanced Linux Sound Architecture Driver Initialized. [ 0.454341] PCI: Using ACPI for IRQ routing [ 0.459192] PCI: pci_cache_line_size set to 64 bytes [ 0.459347] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.459522] Expanded resource Reserved due to conflict with Reserved [ 0.459722] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.459726] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.460045] NetLabel: Initializing [ 0.460234] NetLabel: domain hash size = 128 [ 0.460398] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.460603] NetLabel: unlabeled traffic allowed by default [ 0.461294] clocksource: Switched to clocksource tsc-early [ 0.475729] VFS: Disk quotas dquot_6.6.0 [ 0.475977] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.476247] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.476576] pnp: PnP ACPI init [ 0.477033] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.477069] xen: registering gsi 8 triggering 1 polarity 0 [ 0.477117] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.477539] xen: registering gsi 4 triggering 1 polarity 0 [ 0.477541] Already setup the GSI :4 [ 0.477820] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.478241] xen: registering gsi 3 triggering 1 polarity 0 [ 0.478341] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.479898] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.480082] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.480268] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.480437] system 00:04: [io 0x0dff] has been reserved [ 0.480642] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.480815] system 00:04: [io 0x0eff] has been reserved [ 0.480990] system 00:04: [io 0x040b] has been reserved [ 0.481176] system 00:04: [io 0x04d6] has been reserved [ 0.481345] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.481542] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.481713] system 00:04: [io 0x0c14] has been reserved [ 0.481907] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.482083] system 00:04: [io 0x0c6c] has been reserved [ 0.482250] system 00:04: [io 0x0c6f] has been reserved [ 0.482416] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.482593] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.482765] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.482968] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.483169] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.483340] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.483518] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.483697] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.483868] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.484049] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.484221] system 00:04: [io 0x0950] has been reserved [ 0.484454] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.484532] pnp 00:05: [irq 0 disabled] [ 0.484577] system 00:05: [io 0x0ca8] has been reserved [ 0.484759] system 00:05: [io 0x0cac] has been reserved [ 0.484942] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.486375] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.486569] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.486877] pnp: PnP ACPI: found 7 devices [ 0.499920] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.500213] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.500387] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.500568] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.500757] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.500947] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.501141] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.501316] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.501517] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.501812] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.501814] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.501815] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.501817] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.501818] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.501820] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.501821] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.501823] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.501824] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.501825] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.501826] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.501828] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.501829] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.501831] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.501833] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.501834] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.501836] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.501837] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.501838] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.501839] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.501841] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.501842] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.501843] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.501845] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.501846] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.501847] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.501848] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.501965] NET: Registered protocol family 2 [ 0.502358] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.502669] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.502860] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.503069] TCP: Hash tables configured (established 4096 bind 4096) [ 0.505339] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.505519] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.505756] NET: Registered protocol family 1 [ 0.506538] RPC: Registered named UNIX socket transport module. [ 0.506718] RPC: Registered udp transport module. [ 0.506890] RPC: Registered tcp transport module. [ 0.507067] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.507700] xen: registering gsi 16 triggering 0 polarity 1 [ 0.507752] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.635304] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 124744 usecs [ 0.635686] xen: registering gsi 16 triggering 0 polarity 1 [ 0.635702] Already setup the GSI :16 [ 0.636092] xen: registering gsi 17 triggering 0 polarity 1 [ 0.636152] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.636332] xen: registering gsi 18 triggering 0 polarity 1 [ 0.636344] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.636502] xen: registering gsi 18 triggering 0 polarity 1 [ 0.636504] Already setup the GSI :18 [ 0.636823] xen: registering gsi 19 triggering 0 polarity 1 [ 0.636843] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.637065] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.637342] PCI: CLS 64 bytes, default 64 [ 0.637445] Unpacking initramfs... [ 1.064978] Freeing initrd memory: 25900K [ 1.065384] kvm: no hardware support [ 1.065558] has_svm: svm not available [ 1.065752] kvm: no hardware support [ 1.068569] Scanning for low memory corruption every 60 seconds [ 1.069998] Initialise system trusted keyrings [ 1.070305] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.072732] NFS: Registering the id_resolver key type [ 1.072914] Key type id_resolver registered [ 1.073136] Key type id_legacy registered [ 1.078212] Key type asymmetric registered [ 1.078417] Asymmetric key parser 'x509' registered [ 1.078695] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.078980] io scheduler noop registered [ 1.079185] io scheduler deadline registered [ 1.079450] io scheduler cfq registered (default) [ 1.079619] io scheduler mq-deadline registered [ 1.079784] io scheduler kyber registered [ 1.080790] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.080962] xen: registering gsi 52 triggering 0 polarity 0 [ 1.081018] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.081413] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.081611] xen: registering gsi 53 triggering 0 polarity 0 [ 1.081625] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.081894] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.082120] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.082494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.082867] ACPI: Power Button [PWRF] [ 1.083680] Warning: Processor Platform Limit not supported. [ 1.084130] xen:xen_evtchn: Event-channel device installed [ 1.084427] xen_pciback: backend is vpci [ 1.085460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.106864] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.108141] hpet_acpi_add: no address or irqs in _CRS [ 1.108406] Non-volatile memory driver v1.3 [ 1.113226] loop: module loaded [ 1.119780] ahci 0000:00:11.0: version 3.0 [ 1.119978] xen: registering gsi 22 triggering 0 polarity 1 [ 1.120040] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.120224] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.120533] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.121714] scsi host0: ahci [ 1.122255] scsi host1: ahci [ 1.122757] scsi host2: ahci [ 1.123403] scsi host3: ahci [ 1.123725] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.123992] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.124301] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.124598] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.125194] tun: Universal TUN/TAP device driver, 1.6 [ 1.125534] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.125760] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.125950] sky2: driver version 1.30 [ 1.126218] xen_netfront: Initialising Xen virtual ethernet driver [ 1.126632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.126830] ehci-pci: EHCI PCI platform driver [ 1.127176] xen: registering gsi 17 triggering 0 polarity 1 [ 1.127192] Already setup the GSI :17 [ 1.127445] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.127740] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.128049] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.128343] ehci-pci 0000:00:12.2: debug port 1 [ 1.128733] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.136116] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.136428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.136734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.137027] usb usb1: Product: EHCI Host Controller [ 1.137196] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.137361] usb usb1: SerialNumber: 0000:00:12.2 [ 1.137844] hub 1-0:1.0: USB hub found [ 1.138031] hub 1-0:1.0: 6 ports detected [ 1.138636] xen: registering gsi 19 triggering 0 polarity 1 [ 1.138662] Already setup the GSI :19 [ 1.138896] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.139214] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.139491] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.139789] ehci-pci 0000:00:13.2: debug port 1 [ 1.140126] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.148100] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.148412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.148692] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.148987] usb usb2: Product: EHCI Host Controller [ 1.149173] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.149359] usb usb2: SerialNumber: 0000:00:13.2 [ 1.149811] hub 2-0:1.0: USB hub found [ 1.149980] hub 2-0:1.0: 6 ports detected [ 1.150431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.150638] ohci-pci: OHCI PCI platform driver [ 1.151018] xen: registering gsi 16 triggering 0 polarity 1 [ 1.151034] Already setup the GSI :16 [ 1.151258] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.151555] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.151974] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.208234] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.208555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.208874] usb usb3: Product: OHCI PCI host controller [ 1.209052] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.209216] usb usb3: SerialNumber: 0000:00:12.0 [ 1.209754] hub 3-0:1.0: USB hub found [ 1.209952] hub 3-0:1.0: 3 ports detected [ 1.210457] xen: registering gsi 16 triggering 0 polarity 1 [ 1.210473] Already setup the GSI :16 [ 1.210733] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.211088] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.211450] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.267216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.267551] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.267817] usb usb4: Product: OHCI PCI host controller [ 1.267980] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.268160] usb usb4: SerialNumber: 0000:00:12.1 [ 1.268712] hub 4-0:1.0: USB hub found [ 1.268885] hub 4-0:1.0: 3 ports detected [ 1.269390] xen: registering gsi 18 triggering 0 polarity 1 [ 1.269404] Already setup the GSI :18 [ 1.269642] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.269963] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.270397] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.326236] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.326550] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.326848] usb usb5: Product: OHCI PCI host controller [ 1.327026] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.327219] usb usb5: SerialNumber: 0000:00:13.0 [ 1.327686] hub 5-0:1.0: USB hub found [ 1.327862] hub 5-0:1.0: 3 ports detected [ 1.328412] xen: registering gsi 18 triggering 0 polarity 1 [ 1.328428] Already setup the GSI :18 [ 1.328691] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.329029] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.329379] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.385219] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.385536] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.385831] usb usb6: Product: OHCI PCI host controller [ 1.385993] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.386179] usb usb6: SerialNumber: 0000:00:13.1 [ 1.386715] hub 6-0:1.0: USB hub found [ 1.386892] hub 6-0:1.0: 3 ports detected [ 1.387299] uhci_hcd: USB Universal Host Controller Interface driver [ 1.387595] usbcore: registered new interface driver usblp [ 1.387838] usbcore: registered new interface driver usb-storage [ 1.388066] i8042: PNP: No PS/2 controller found. [ 1.388245] i8042: Probing ports directly. [ 1.391427] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.391651] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.392258] rtc_cmos 00:01: RTC can wake from S4 [ 1.392810] rtc_cmos 00:01: registered as rtc0 [ 1.393018] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.393372] device-mapper: uevent: version 1.0.3 [ 1.393659] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.393977] hidraw: raw HID events driver (C) Jiri Kosina [ 1.394451] usbcore: registered new interface driver usbhid [ 1.396645] usbhid: USB HID core driver [ 1.398216] Initializing XFRM netlink socket [ 1.398602] NET: Registered protocol family 10 [ 1.399226] Segment Routing with IPv6 [ 1.399991] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.400378] NET: Registered protocol family 17 [ 1.400593] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.400918] Key type dns_resolver registered [ 1.402299] mce: Using 2 MCE banks [ 1.402516] Using IPI No-Shortcut mode [ 1.402693] sched_clock: Marking stable (1367070756, 35128234)->(1408126757, -5927767) [ 1.404119] registered taskstats version 1 [ 1.404285] Loading compiled-in X.509 certificates [ 1.404892] Magic number: 13:497:928 [ 1.405256] console [netcon0] enabled [ 1.405446] netconsole: network logging started [ 1.405708] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.415656] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.415927] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.416217] cfg80211: failed to load regulatory.db [ 1.416449] ALSA device list: [ 1.416615] No soundcards found. [ 1.433118] ata1: SATA link down (SStatus 0 SControl 300) [ 1.434106] ata3: SATA link down (SStatus 0 SControl 300) [ 1.435106] ata4: SATA link down (SStatus 0 SControl 300) [ 1.438080] ata2: SATA link down (SStatus 0 SControl 300) [ 1.439313] Freeing unused kernel image memory: 840K [ 1.445051] Write protecting the kernel text: 9000k [ 1.445798] Write protecting the kernel read-only data: 2360k [ 1.445992] NX-protecting the kernel data: 5336k [ 1.446888] Run /init as init process [ 1.453261] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.581771] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.582148] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.583073] hub 1-3:1.0: USB hub found [ 1.583371] hub 1-3:1.0: 4 ports detected [ 1.607766] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.608306] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.608481] xen: registering gsi 48 triggering 0 polarity 0 [ 1.608532] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.609406] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.609911] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.610092] xen: registering gsi 49 triggering 0 polarity 0 [ 1.610109] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.610724] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.611941] mpt3sas version 26.100.00.00 loaded [ 1.612361] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.613100] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.613277] xen: registering gsi 24 triggering 0 polarity 0 [ 1.613331] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.613383] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.623077] random: crng init done [ 1.670407] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.670783] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.671392] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.671564] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x11279e70), size(65536) [ 1.671858] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 1.706367] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.706705] mpt2sas_cm0: sending diag reset !! [ 2.056178] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c9006ed6, max_idle_ns: 440795221488 ns [ 2.056707] clocksource: Switched to clocksource tsc [ 3.006132] mpt2sas_cm0: diag reset: SUCCESS [ 3.051563] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.051826] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.052145] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.100581] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.100987] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.101008] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.101603] mpt2sas_cm0: Protocol=( [ 3.101604] Initiator [ 3.101763] ,Target [ 3.101916] ), [ 3.102106] Capabilities=( [ 3.102270] Raid [ 3.102426] ,TLR [ 3.102586] ,EEDP [ 3.102739] ,Snapshot Buffer [ 3.102892] ,Diag Trace Buffer [ 3.103056] ,Task Set Full [ 3.103240] ,NCQ [ 3.103395] ) [ 3.103934] scsi host4: Fusion MPT SAS Host [ 3.117048] mpt2sas_cm0: sending port enable !! [ 4.682496] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 10.809090] mpt2sas_cm0: port enable: SUCCESS [ 10.810924] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 10.811213] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 10.811482] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 10.811770] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 10.813140] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 10.814376] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.887864] sd 4:0:0:0: [sda] Write Protect is off [ 10.888120] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 10.888688] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.963031] sda: sda1 sda2 < sda5 > [ 11.038960] sd 4:0:0:0: [sda] Attached SCSI disk [ 11.800675] PM: Image not found (code -22) [ 12.186544] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.530956] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.956838] systemd-udevd[1518]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.293104] systemd-udevd[1535]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.293116] systemd-udevd[1531]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.305225] systemd-udevd[1536]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.305266] systemd-udevd[1533]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.321331] systemd-udevd[1536]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.321444] systemd-udevd[1535]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.321520] systemd-udevd[1533]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.321589] systemd-udevd[1531]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.661705] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.869622] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.933041] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.002341] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.578907] systemd-udevd[1535]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.583327] xenbr0: port 1(eth0) entered blocking state [ 17.583519] xenbr0: port 1(eth0) entered disabled state [ 17.583743] device eth0 entered promiscuous mode [ 17.682522] bnx2 0000:02:00.0 eth0: using MSIX [ 17.689334] xenbr0: port 1(eth0) entered blocking state [ 17.689544] xenbr0: port 1(eth0) entered forwarding state [ 17.689735] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready