[ 0.000000] Reserving virtual address space above 0xfdc00000 (rounded to 0xfdc00000) [ 0.000000] Linux version 4.19.80+ (osstest@nocera0) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:57:12 UTC 2021 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031357] tsc: Fast TSC calibration using PIT [ 0.031361] tsc: Detected 2800.074 MHz processor [ 0.031363] tsc: Detected 2800.058 MHz TSC [ 0.054358] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.054362] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.054369] last_pfn = 0x20062 max_arch_pfn = 0x1000000 [ 0.054373] Disabled [ 0.054375] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.054387] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.054432] Scanning 1 areas for low memory corruption [ 0.054434] initial memory mapped: [mem 0x00000000-0x02bfefff] [ 0.054748] BRK [0x01d7d000, 0x01d7dfff] PGTABLE [ 0.203802] BRK [0x01d7e000, 0x01d7efff] PGTABLE [ 0.203938] BRK [0x01d7f000, 0x01d7ffff] PGTABLE [ 0.203986] RAMDISK: [mem 0x04000000-0x0594afff] [ 0.204008] ACPI: Early table checksum verification disabled [ 0.218746] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.218757] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218812] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.218929] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.218941] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.218951] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.218961] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.218973] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218985] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.218997] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219009] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219022] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219035] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219047] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219059] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219070] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219082] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219095] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.219107] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.219119] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.219131] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.219142] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.219179] ACPI: Local APIC address 0xfee00000 [ 0.219181] Switched to APIC driver `Xen PV'. [ 0.219228] 0MB HIGHMEM available. [ 0.219232] 512MB LOWMEM available. [ 0.219233] mapped low ram: 0 - 20062000 [ 0.219234] low ram: 0 - 20062000 [ 0.219239] BRK [0x01d80000, 0x01d80fff] PGTABLE [ 0.219261] Zone ranges: [ 0.219263] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.219265] Normal [mem 0x0000000001000000-0x0000000020061fff] [ 0.219267] HighMem empty [ 0.219269] Movable zone start for each node [ 0.219270] Early memory node ranges [ 0.219271] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.219273] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.219276] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.219280] On node 0 totalpages: 131071 [ 0.221466] DMA zone: 32 pages used for memmap [ 0.221469] DMA zone: 0 pages reserved [ 0.221471] DMA zone: 3997 pages, LIFO batch:0 [ 0.221573] Normal zone: 993 pages used for memmap [ 0.221574] Normal zone: 127074 pages, LIFO batch:31 [ 0.224498] p2m virtual area at (ptrval), size is 400000 [ 0.225080] BRK [0x01d81000, 0x01d81fff] PGTABLE [ 0.225993] BRK [0x01d82000, 0x01d82fff] PGTABLE [ 0.227245] Remapped 98 page(s) [ 0.227250] Using APIC driver Xen PV [ 0.227663] ACPI: PM-Timer IO Port: 0x808 [ 0.227670] ACPI: Local APIC address 0xfee00000 [ 0.227671] Switched to APIC driver `Xen PV'. [ 0.227860] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.227917] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.227926] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.227962] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.227970] ACPI: IRQ0 used by override. [ 0.227972] ACPI: IRQ9 used by override. [ 0.228008] Using ACPI (MADT) for SMP configuration information [ 0.228014] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.228021] ACPI: SPCR: SPCR table version 1 [ 0.228025] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.228034] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.228058] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.228060] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.228061] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.228065] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.228070] Booting paravirtualized kernel on Xen [ 0.228072] Xen version: 4.16-rc (preserve-AD) [ 0.228079] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.228101] random: get_random_bytes called from start_kernel+0x74/0x3f3 with crng_init=0 [ 0.228112] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.228794] percpu: Embedded 29 pages/cpu s86924 r0 d31860 u118784 [ 0.228802] pcpu-alloc: s86924 r0 d31860 u118784 alloc=29*4096 [ 0.228804] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.228915] xen: PV spinlocks enabled [ 0.228922] PV qspinlock hash table entries: 512 (order: 0, 4096 bytes) [ 0.228931] Built 1 zonelists, mobility grouping on. Total pages: 130046 [ 0.228935] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.229219] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.229290] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.229370] Initializing CPU#0 [ 0.320092] software IO TLB: mapped [mem 0x1b9fd000-0x1f9fd000] (64MB) [ 0.320105] Initializing HighMem for node 0 (00000000:00000000) [ 0.323252] Memory: 411488K/524284K available (8996K kernel code, 829K rwdata, 2332K rodata, 840K init, 548K bss, 112796K reserved, 0K cma-reserved, 0K highmem) [ 0.323260] virtual kernel memory layout: fixmap : 0xfdb16000 - 0xfdbff000 ( 932 kB) cpu_entry : 0xfd600000 - 0xfd739000 (1252 kB) pkmap : 0xfd200000 - 0xfd400000 (2048 kB) vmalloc : 0xe0862000 - 0xfd1fe000 ( 457 MB) lowmem : 0xc0000000 - 0xe0062000 ( 512 MB) .init : 0xc1c11000 - 0xc1ce3000 ( 840 kB) .data : 0xc18c91c8 - 0xc1be7600 (3193 kB) .text : 0xc1000000 - 0xc18c91c8 (8996 kB) [ 0.323265] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.323407] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.323651] rcu: Hierarchical RCU implementation. [ 0.323656] rcu: RCU event tracing is enabled. [ 0.323980] Using NULL legacy PIC [ 0.323983] NR_IRQS: 2304, nr_irqs: 1032, preallocated irqs: 0 [ 0.324060] xen:events: Using FIFO-based ABI [ 0.324079] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.324120] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.324126] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.324130] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.324134] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.324138] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.324142] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.324146] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.324150] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.324154] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.324159] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.324167] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.324171] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.324175] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.324179] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.324184] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.331081] Console: colour VGA+ 80x25 [ 0.350769] console [tty0] enabled [ 0.351364] console [hvc0] enabled [ 0.351537] ACPI: Core revision 20180810 [ 0.358668] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.358961] Xen: using vcpuop timer interface [ 0.358970] installing Xen timer for CPU 0 [ 0.359232] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c775e645, max_idle_ns: 440795245317 ns [ 0.359611] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.11 BogoMIPS (lpj=2800058) [ 0.359929] pid_max: default: 32768 minimum: 301 [ 0.360123] Security Framework initialized [ 0.360580] SELinux: Initializing. [ 0.360775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.360989] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.361524] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.361568] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.361743] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.362018] Spectre V2 : Mitigation: Full AMD retpoline [ 0.362186] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.362821] Freeing SMP alternatives memory: 36K [ 0.365789] cpu 0 spinlock event irq 57 [ 0.365967] VPMU disabled by hypervisor. [ 0.366320] Performance Events: PMU not available due to virtualization, using software events only. [ 0.366656] rcu: Hierarchical SRCU implementation. [ 0.367109] smp: Bringing up secondary CPUs ... [ 0.367393] installing Xen timer for CPU 1 [ 0.367626] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036367] Initializing CPU#1 [ 0.368023] cpu 1 spinlock event irq 69 [ 0.368689] installing Xen timer for CPU 2 [ 0.368900] CPU 2 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036367] Initializing CPU#2 [ 0.369230] cpu 2 spinlock event irq 76 [ 0.369687] installing Xen timer for CPU 3 [ 0.369899] CPU 3 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036367] Initializing CPU#3 [ 0.370170] cpu 3 spinlock event irq 83 [ 0.370681] installing Xen timer for CPU 4 [ 0.370895] CPU 4 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036367] Initializing CPU#4 [ 0.371628] cpu 4 spinlock event irq 90 [ 0.371959] installing Xen timer for CPU 5 [ 0.371959] CPU 5 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036367] Initializing CPU#5 [ 0.372634] cpu 5 spinlock event irq 97 [ 0.372973] installing Xen timer for CPU 6 [ 0.372973] CPU 6 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036367] Initializing CPU#6 [ 0.373709] cpu 6 spinlock event irq 104 [ 0.374015] installing Xen timer for CPU 7 [ 0.374616] CPU 7 irqstacks, hard=(ptrval) soft=(ptrval) [ 0.036367] Initializing CPU#7 [ 0.374939] cpu 7 spinlock event irq 111 [ 0.375015] smp: Brought up 1 node, 8 CPUs [ 0.375578] smpboot: Max logical packages: 1 [ 0.375977] devtmpfs: initialized [ 0.377580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.377869] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.378333] RTC time: 11:55:18, date: 11/23/21 [ 0.378687] NET: Registered protocol family 16 [ 0.378887] xen:grant_table: Grant tables using version 1 layout [ 0.379150] Grant table initialized [ 0.379983] audit: initializing netlink subsys (disabled) [ 0.380175] audit: type=2000 audit(1637668518.410:1): state=initialized audit_enabled=0 res=1 [ 0.380681] node 0 link 1: io port [e000, ffff] [ 0.380693] TOM: 00000000c0000000 aka 3072M [ 0.380893] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.380898] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.380909] node 0 link 1: mmio [fec80000, fecbffff] [ 0.380914] TOM2: 0000000840000000 aka 33792M [ 0.381121] bus: [bus 00-3f] on node 0 link 1 [ 0.381123] bus: 00 [io 0x0000-0xffff] [ 0.381124] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.381126] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.381127] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.381695] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.381999] ACPI: bus type PCI registered [ 0.382891] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.383173] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.383350] PCI: Using MMCONFIG for extended config space [ 0.383553] PCI: Using configuration type 1 for base access [ 0.386989] random: fast init done [ 0.389821] ACPI: Added _OSI(Module Device) [ 0.390007] ACPI: Added _OSI(Processor Device) [ 0.390174] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.390340] ACPI: Added _OSI(Processor Aggregator Device) [ 0.390509] ACPI: Added _OSI(Linux-Dell-Video) [ 0.390569] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.394755] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.395299] xen: registering gsi 9 triggering 0 polarity 1 [ 0.395763] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.398861] ACPI: Interpreter enabled [ 0.399051] ACPI: (supports S0 S4 S5) [ 0.399241] ACPI: Using IOAPIC for interrupt routing [ 0.399570] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.400846] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.418617] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.418816] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.419843] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.420114] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.422574] PCI host bridge to bus 0000:00 [ 0.422741] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.422915] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.423113] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.423294] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.423475] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.423569] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.423851] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.424144] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.424415] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.424569] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.424851] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.425120] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.425353] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.425700] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.425958] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.426033] pci 0000:00:02.0: enabling Extended Tags [ 0.426293] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.426591] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.426591] pci 0000:00:09.0: enabling Extended Tags [ 0.426644] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.426796] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.426843] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.426862] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.426881] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.426900] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.426918] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.426937] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.426980] pci 0000:00:11.0: set SATA to AHCI mode [ 0.427312] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.427349] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.427641] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.427641] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.427836] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.427880] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.428047] pci 0000:00:12.2: supports D1 D2 [ 0.428049] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.428179] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.428215] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.428589] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.428589] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.428699] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.428743] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.428910] pci 0000:00:13.2: supports D1 D2 [ 0.428912] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.429040] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.429587] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.429587] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.429587] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.429587] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.429587] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.429587] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.429644] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.429919] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.430587] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.430587] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.430587] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.430633] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.430807] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.430967] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.431590] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.431593] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.431595] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.431675] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.431943] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.431978] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.432002] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.432025] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.432054] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.432067] pci 0000:01:00.0: enabling Extended Tags [ 0.432372] pci 0000:01:00.0: supports D1 D2 [ 0.432511] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.432577] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.432582] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.432695] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.432746] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.432973] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.433037] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.433458] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.433510] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.433732] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.433906] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.434085] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.434114] pci_bus 0000:03: extended config space not accessible [ 0.434374] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.434413] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.434434] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.434460] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.434756] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.434944] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.434951] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.434953] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.434955] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.434956] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.434957] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.434959] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.434960] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.434962] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.434963] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.434964] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.434965] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.434967] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.435006] pci_bus 0000:00: on NUMA node 0 [ 0.435136] xen: registering gsi 13 triggering 1 polarity 0 [ 0.437165] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.437432] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.437664] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.437939] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.438205] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.438472] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.438665] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.438929] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.439194] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.439484] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.439661] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.439922] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.440183] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.440430] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.440662] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.440968] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.441231] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.441485] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.441661] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.441923] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.442221] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.442488] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.442664] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.442930] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.443194] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.443500] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.443666] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.443929] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.444180] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.444447] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.444662] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.444956] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.445569] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.445693] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.446021] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.446330] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.446638] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.446947] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.447275] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.447586] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.448695] xen:balloon: Initialising balloon driver [ 0.448695] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.448813] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.449592] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.449762] vgaarb: loaded [ 0.450055] SCSI subsystem initialized [ 0.450610] libata version 3.00 loaded. [ 0.450693] ACPI: bus type USB registered [ 0.450718] usbcore: registered new interface driver usbfs [ 0.450908] usbcore: registered new interface driver hub [ 0.451569] usbcore: registered new device driver usb [ 0.451586] pps_core: LinuxPPS API ver. 1 registered [ 0.451620] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.451900] PTP clock support registered [ 0.452637] EDAC MC: Ver: 3.0.0 [ 0.452804] Advanced Linux Sound Architecture Driver Initialized. [ 0.453042] PCI: Using ACPI for IRQ routing [ 0.458087] PCI: pci_cache_line_size set to 64 bytes [ 0.458242] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.458422] Expanded resource Reserved due to conflict with Reserved [ 0.458571] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.458573] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.458879] NetLabel: Initializing [ 0.459046] NetLabel: domain hash size = 128 [ 0.459213] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.459405] NetLabel: unlabeled traffic allowed by default [ 0.459895] clocksource: Switched to clocksource tsc-early [ 0.474253] VFS: Disk quotas dquot_6.6.0 [ 0.474496] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.474713] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.475079] pnp: PnP ACPI init [ 0.475573] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.475606] xen: registering gsi 8 triggering 1 polarity 0 [ 0.475649] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.476081] xen: registering gsi 4 triggering 1 polarity 0 [ 0.476083] Already setup the GSI :4 [ 0.476400] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.476814] xen: registering gsi 3 triggering 1 polarity 0 [ 0.476921] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.478443] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.478630] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.478833] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.479030] system 00:04: [io 0x0dff] has been reserved [ 0.479218] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.479390] system 00:04: [io 0x0eff] has been reserved [ 0.479560] system 00:04: [io 0x040b] has been reserved [ 0.479745] system 00:04: [io 0x04d6] has been reserved [ 0.479916] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.480123] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.480334] system 00:04: [io 0x0c14] has been reserved [ 0.480503] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.480682] system 00:04: [io 0x0c6c] has been reserved [ 0.480849] system 00:04: [io 0x0c6f] has been reserved [ 0.481018] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.481223] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.481395] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.481571] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.481765] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.481936] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.482107] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.482276] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.482471] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.482657] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.482828] system 00:04: [io 0x0950] has been reserved [ 0.483012] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.483102] pnp 00:05: [irq 0 disabled] [ 0.483144] system 00:05: [io 0x0ca8] has been reserved [ 0.483314] system 00:05: [io 0x0cac] has been reserved [ 0.483495] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.484926] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.485124] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.485410] pnp: PnP ACPI: found 7 devices [ 0.498132] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.498449] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.498624] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.498803] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.498990] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.499168] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.499353] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.499554] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.499774] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.500065] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.500067] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.500068] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.500070] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.500071] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.500073] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.500074] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.500076] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.500077] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.500078] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.500080] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.500081] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.500082] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.500084] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.500086] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.500087] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.500089] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.500090] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.500092] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.500093] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.500094] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.500096] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.500097] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.500098] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.500100] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.500101] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.500102] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.500220] NET: Registered protocol family 2 [ 0.500808] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.501178] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.501370] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.501586] TCP: Hash tables configured (established 4096 bind 4096) [ 0.503842] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.504029] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.504280] NET: Registered protocol family 1 [ 0.505002] RPC: Registered named UNIX socket transport module. [ 0.505175] RPC: Registered udp transport module. [ 0.505376] RPC: Registered tcp transport module. [ 0.505542] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.506281] xen: registering gsi 16 triggering 0 polarity 1 [ 0.506331] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.634858] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c7 took 125689 usecs [ 0.635273] xen: registering gsi 16 triggering 0 polarity 1 [ 0.635290] Already setup the GSI :16 [ 0.635659] xen: registering gsi 17 triggering 0 polarity 1 [ 0.635723] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.635904] xen: registering gsi 18 triggering 0 polarity 1 [ 0.635915] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.636083] xen: registering gsi 18 triggering 0 polarity 1 [ 0.636085] Already setup the GSI :18 [ 0.636430] xen: registering gsi 19 triggering 0 polarity 1 [ 0.636441] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.636623] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.636911] PCI: CLS 64 bytes, default 64 [ 0.637030] Unpacking initramfs... [ 1.062412] Freeing initrd memory: 25900K [ 1.062845] kvm: no hardware support [ 1.063021] has_svm: svm not available [ 1.063197] kvm: no hardware support [ 1.065964] Scanning for low memory corruption every 60 seconds [ 1.067463] Initialise system trusted keyrings [ 1.067790] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.070215] NFS: Registering the id_resolver key type [ 1.070398] Key type id_resolver registered [ 1.070580] Key type id_legacy registered [ 1.076172] Key type asymmetric registered [ 1.076373] Asymmetric key parser 'x509' registered [ 1.076614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.076895] io scheduler noop registered [ 1.077073] io scheduler deadline registered [ 1.077355] io scheduler cfq registered (default) [ 1.077524] io scheduler mq-deadline registered [ 1.077702] io scheduler kyber registered [ 1.078625] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.078799] xen: registering gsi 52 triggering 0 polarity 0 [ 1.078849] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.079252] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.079421] xen: registering gsi 53 triggering 0 polarity 0 [ 1.079435] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.079687] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.079933] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.080353] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.080671] ACPI: Power Button [PWRF] [ 1.081559] Warning: Processor Platform Limit not supported. [ 1.082001] xen:xen_evtchn: Event-channel device installed [ 1.082333] xen_pciback: backend is vpci [ 1.083479] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.104911] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.106411] hpet_acpi_add: no address or irqs in _CRS [ 1.106788] Non-volatile memory driver v1.3 [ 1.111333] loop: module loaded [ 1.117851] ahci 0000:00:11.0: version 3.0 [ 1.118063] xen: registering gsi 22 triggering 0 polarity 1 [ 1.118133] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.118331] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.118688] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.120005] scsi host0: ahci [ 1.120643] scsi host1: ahci [ 1.121165] scsi host2: ahci [ 1.121756] scsi host3: ahci [ 1.122055] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.122321] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.122643] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.122915] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.123502] tun: Universal TUN/TAP device driver, 1.6 [ 1.123824] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.123991] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.124206] sky2: driver version 1.30 [ 1.124454] xen_netfront: Initialising Xen virtual ethernet driver [ 1.124860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.125052] ehci-pci: EHCI PCI platform driver [ 1.125486] xen: registering gsi 17 triggering 0 polarity 1 [ 1.125502] Already setup the GSI :17 [ 1.125771] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.126054] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.126356] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.126657] ehci-pci 0000:00:12.2: debug port 1 [ 1.126997] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.134641] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.134985] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.135292] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.135560] usb usb1: Product: EHCI Host Controller [ 1.135754] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.135947] usb usb1: SerialNumber: 0000:00:12.2 [ 1.136489] hub 1-0:1.0: USB hub found [ 1.136708] hub 1-0:1.0: 6 ports detected [ 1.137312] xen: registering gsi 19 triggering 0 polarity 1 [ 1.137330] Already setup the GSI :19 [ 1.137581] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.137869] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.138172] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.138488] ehci-pci 0000:00:13.2: debug port 1 [ 1.138798] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.146655] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.146949] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.147224] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.147490] usb usb2: Product: EHCI Host Controller [ 1.147697] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.147865] usb usb2: SerialNumber: 0000:00:13.2 [ 1.148383] hub 2-0:1.0: USB hub found [ 1.148550] hub 2-0:1.0: 6 ports detected [ 1.148980] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.149198] ohci-pci: OHCI PCI platform driver [ 1.149610] xen: registering gsi 16 triggering 0 polarity 1 [ 1.149621] Already setup the GSI :16 [ 1.149847] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.150185] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.150616] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.207758] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.208097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.208364] usb usb3: Product: OHCI PCI host controller [ 1.208530] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.208739] usb usb3: SerialNumber: 0000:00:12.0 [ 1.209302] hub 3-0:1.0: USB hub found [ 1.209475] hub 3-0:1.0: 3 ports detected [ 1.209956] xen: registering gsi 16 triggering 0 polarity 1 [ 1.209970] Already setup the GSI :16 [ 1.210238] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.210563] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.210936] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.266771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.267111] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.267393] usb usb4: Product: OHCI PCI host controller [ 1.267559] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.267740] usb usb4: SerialNumber: 0000:00:12.1 [ 1.268352] hub 4-0:1.0: USB hub found [ 1.268526] hub 4-0:1.0: 3 ports detected [ 1.269036] xen: registering gsi 18 triggering 0 polarity 1 [ 1.269068] Already setup the GSI :18 [ 1.269303] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.269645] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.270051] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.326754] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.327075] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.327351] usb usb5: Product: OHCI PCI host controller [ 1.327516] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.327694] usb usb5: SerialNumber: 0000:00:13.0 [ 1.328212] hub 5-0:1.0: USB hub found [ 1.328391] hub 5-0:1.0: 3 ports detected [ 1.328910] xen: registering gsi 18 triggering 0 polarity 1 [ 1.328927] Already setup the GSI :18 [ 1.329207] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.329524] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.329893] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.385775] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.386101] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.386421] usb usb6: Product: OHCI PCI host controller [ 1.386606] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.386771] usb usb6: SerialNumber: 0000:00:13.1 [ 1.387341] hub 6-0:1.0: USB hub found [ 1.387529] hub 6-0:1.0: 3 ports detected [ 1.387965] uhci_hcd: USB Universal Host Controller Interface driver [ 1.388223] usbcore: registered new interface driver usblp [ 1.388433] usbcore: registered new interface driver usb-storage [ 1.388667] i8042: PNP: No PS/2 controller found. [ 1.388856] i8042: Probing ports directly. [ 1.392054] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.392278] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.392888] rtc_cmos 00:01: RTC can wake from S4 [ 1.393395] rtc_cmos 00:01: registered as rtc0 [ 1.393607] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.393970] device-mapper: uevent: version 1.0.3 [ 1.394294] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.394640] hidraw: raw HID events driver (C) Jiri Kosina [ 1.395203] usbcore: registered new interface driver usbhid [ 1.397369] usbhid: USB HID core driver [ 1.398938] Initializing XFRM netlink socket [ 1.399317] NET: Registered protocol family 10 [ 1.399928] Segment Routing with IPv6 [ 1.400761] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.401182] NET: Registered protocol family 17 [ 1.401368] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.401691] Key type dns_resolver registered [ 1.403027] mce: Using 2 MCE banks [ 1.403251] Using IPI No-Shortcut mode [ 1.403480] sched_clock: Marking stable (1367479392, 35367979)->(1409704960, -6857589) [ 1.404900] registered taskstats version 1 [ 1.405065] Loading compiled-in X.509 certificates [ 1.405677] Magic number: 13:815:934 [ 1.406161] console [netcon0] enabled [ 1.406328] netconsole: network logging started [ 1.406634] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.417352] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.417664] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.417940] cfg80211: failed to load regulatory.db [ 1.418198] ALSA device list: [ 1.418355] No soundcards found. [ 1.428661] ata2: SATA link down (SStatus 0 SControl 300) [ 1.429650] ata3: SATA link down (SStatus 0 SControl 300) [ 1.429886] ata1: SATA link down (SStatus 0 SControl 300) [ 1.430169] ata4: SATA link down (SStatus 0 SControl 300) [ 1.431397] Freeing unused kernel image memory: 840K [ 1.433624] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.438508] Write protecting the kernel text: 9000k [ 1.439240] Write protecting the kernel read-only data: 2360k [ 1.439408] NX-protecting the kernel data: 5336k [ 1.440297] Run /init as init process [ 1.564033] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.564347] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.565359] hub 1-3:1.0: USB hub found [ 1.565634] hub 1-3:1.0: 4 ports detected [ 1.601847] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.602451] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.602658] xen: registering gsi 48 triggering 0 polarity 0 [ 1.602703] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.603473] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.603976] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.604140] xen: registering gsi 49 triggering 0 polarity 0 [ 1.604156] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.604779] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.606486] mpt3sas version 26.100.00.00 loaded [ 1.606942] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.607676] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.607841] xen: registering gsi 24 triggering 0 polarity 0 [ 1.607883] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.607927] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (438264 kB) [ 1.616024] random: crng init done [ 1.664760] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.665166] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.665734] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.665906] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0xb52b43cc), size(65536) [ 1.666251] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 1.724472] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.724849] mpt2sas_cm0: sending diag reset !! [ 2.054715] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c775e645, max_idle_ns: 440795245317 ns [ 2.055197] clocksource: Switched to clocksource tsc [ 3.030488] mpt2sas_cm0: diag reset: SUCCESS [ 3.074956] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.075233] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.075512] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.123583] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.123985] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.124272] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.124554] mpt2sas_cm0: Protocol=( [ 3.124555] Initiator [ 3.124764] ,Target [ 3.124921] ), [ 3.125113] Capabilities=( [ 3.125267] Raid [ 3.125425] ,TLR [ 3.125584] ,EEDP [ 3.125738] ,Snapshot Buffer [ 3.125917] ,Diag Trace Buffer [ 3.126077] ,Task Set Full [ 3.126234] ,NCQ [ 3.126391] ) [ 3.126838] scsi host4: Fusion MPT SAS Host [ 3.138670] mpt2sas_cm0: sending port enable !! [ 4.704946] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 10.830641] mpt2sas_cm0: port enable: SUCCESS [ 10.832293] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 10.832603] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 10.832879] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 10.833129] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 10.834398] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 10.835706] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.916059] sd 4:0:0:0: [sda] Write Protect is off [ 10.916269] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 10.916835] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.991224] sda: sda1 sda2 < sda5 > [ 11.067177] sd 4:0:0:0: [sda] Attached SCSI disk [ 11.845739] PM: Image not found (code -22) [ 12.223111] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.567490] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.902870] systemd-udevd[1519]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.189204] systemd-udevd[1531]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.189205] systemd-udevd[1534]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.194382] systemd-udevd[1534]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.195108] systemd-udevd[1531]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.243448] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.243503] systemd-udevd[1532]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.249077] systemd-udevd[1539]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.249190] systemd-udevd[1532]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.673267] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.922853] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 16.986299] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.055805] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.595288] systemd-udevd[1533]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.599734] xenbr0: port 1(eth0) entered blocking state [ 17.599913] xenbr0: port 1(eth0) entered disabled state [ 17.600141] device eth0 entered promiscuous mode [ 17.697908] bnx2 0000:02:00.0 eth0: using MSIX [ 17.704753] xenbr0: port 1(eth0) entered blocking state [ 17.704966] xenbr0: port 1(eth0) entered forwarding state [ 17.705158] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready