[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.030926] tsc: Fast TSC calibration using PIT [ 0.030931] tsc: Detected 2799.891 MHz processor [ 0.030933] tsc: Detected 2800.052 MHz TSC [ 0.052755] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.052759] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.052766] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.052768] Disabled [ 0.052770] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.052780] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.052869] Scanning 1 areas for low memory corruption [ 0.054774] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.127701] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.129886] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.129934] ACPI: Early table checksum verification disabled [ 0.144651] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.144663] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144718] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.144832] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.144844] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.144854] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.144863] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.144876] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144889] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144900] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144911] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144922] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144933] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144945] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144956] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144969] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144981] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144992] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.145004] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.145014] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.145026] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.145038] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.145074] ACPI: Local APIC address 0xfee00000 [ 0.145076] Setting APIC routing to Xen PV. [ 0.146123] Zone ranges: [ 0.146128] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.146131] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.146133] Normal empty [ 0.146135] Movable zone start for each node [ 0.146136] Early memory node ranges [ 0.146138] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.146139] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.146142] Reserved but unavailable: 1 pages [ 0.146146] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.146150] On node 0 totalpages: 131071 [ 0.146153] DMA zone: 64 pages used for memmap [ 0.146154] DMA zone: 21 pages reserved [ 0.146155] DMA zone: 3997 pages, LIFO batch:0 [ 0.146346] DMA32 zone: 1986 pages used for memmap [ 0.146348] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.152821] p2m virtual area at (____ptrval____), size is 40000000 [ 0.348843] Remapped 98 page(s) [ 0.349297] ACPI: PM-Timer IO Port: 0x808 [ 0.349305] ACPI: Local APIC address 0xfee00000 [ 0.349492] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.349550] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.349558] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.349597] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.349606] ACPI: IRQ0 used by override. [ 0.349607] ACPI: IRQ9 used by override. [ 0.349643] Using ACPI (MADT) for SMP configuration information [ 0.349648] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.349655] ACPI: SPCR: SPCR table version 1 [ 0.349660] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.349671] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.349702] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.349704] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.349706] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.349710] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.349715] Booting paravirtualized kernel on Xen [ 0.349716] Xen version: 4.16-rc (preserve-AD) [ 0.349724] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.508165] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.508190] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.509608] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.509620] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.509623] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.509766] xen: PV spinlocks enabled [ 0.509774] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.509783] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.509790] Kernel command line: placeholder root=/dev/mapper/nocera1--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.510216] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.510363] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.607982] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.614172] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.614345] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.615826] rcu: Hierarchical RCU implementation. [ 0.615828] rcu: RCU event tracing is enabled. [ 0.615830] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.615832] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.616951] Using NULL legacy PIC [ 0.616954] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.617039] xen:events: Using FIFO-based ABI [ 0.617089] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.617095] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.617102] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.617107] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.617113] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.617118] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.617123] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.617128] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.617134] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.617140] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.617150] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.617155] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.617161] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.617167] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.617173] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.623458] Console: colour VGA+ 80x25 [ 0.639244] console [tty0] enabled [ 0.639769] console [hvc0] enabled [ 0.639934] ACPI: Core revision 20180810 [ 0.646973] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.647235] Xen: using vcpuop timer interface [ 0.647246] installing Xen timer for CPU 0 [ 0.647508] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c71ccff4, max_idle_ns: 440795309360 ns [ 0.647855] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.10 BogoMIPS (lpj=2800052) [ 0.648140] pid_max: default: 32768 minimum: 301 [ 0.648349] Security Framework initialized [ 0.648788] SELinux: Initializing. [ 0.648999] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.649167] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.649813] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.649970] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.650129] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.650379] Spectre V2 : Mitigation: Full AMD retpoline [ 0.650531] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.651095] Freeing SMP alternatives memory: 36K [ 0.653988] cpu 0 spinlock event irq 57 [ 0.654154] VPMU disabled by hypervisor. [ 0.654529] Performance Events: PMU not available due to virtualization, using software events only. [ 0.654877] rcu: Hierarchical SRCU implementation. [ 0.655489] smp: Bringing up secondary CPUs ... [ 0.655842] installing Xen timer for CPU 1 [ 0.656506] cpu 1 spinlock event irq 69 [ 0.656958] installing Xen timer for CPU 2 [ 0.657505] cpu 2 spinlock event irq 76 [ 0.657968] installing Xen timer for CPU 3 [ 0.658379] cpu 3 spinlock event irq 83 [ 0.658999] installing Xen timer for CPU 4 [ 0.659449] cpu 4 spinlock event irq 90 [ 0.659998] installing Xen timer for CPU 5 [ 0.660773] cpu 5 spinlock event irq 97 [ 0.660979] installing Xen timer for CPU 6 [ 0.661467] cpu 6 spinlock event irq 104 [ 0.661961] installing Xen timer for CPU 7 [ 0.662772] cpu 7 spinlock event irq 111 [ 0.662779] smp: Brought up 1 node, 8 CPUs [ 0.662941] smpboot: Max logical packages: 1 [ 0.663936] devtmpfs: initialized [ 0.664050] x86/mm: Memory block size: 128MB [ 0.665063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.665781] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.666386] RTC time: 16:28:13, date: 11/23/21 [ 0.666769] NET: Registered protocol family 16 [ 0.666963] xen:grant_table: Grant tables using version 1 layout [ 0.667265] Grant table initialized [ 0.667836] audit: initializing netlink subsys (disabled) [ 0.668023] audit: type=2000 audit(1637684893.404:1): state=initialized audit_enabled=0 res=1 [ 0.668086] node 0 link 1: io port [e000, ffff] [ 0.668086] TOM: 00000000c0000000 aka 3072M [ 0.668783] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.668789] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.668798] node 0 link 1: mmio [fec80000, fecbffff] [ 0.668803] TOM2: 0000000840000000 aka 33792M [ 0.668955] bus: [bus 00-3f] on node 0 link 1 [ 0.668956] bus: 00 [io 0x0000-0xffff] [ 0.668958] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.668959] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.668959] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.669020] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.669776] ACPI: bus type PCI registered [ 0.670327] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.670602] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.683708] PCI: Using configuration type 1 for base access [ 0.691924] ACPI: Added _OSI(Module Device) [ 0.692102] ACPI: Added _OSI(Processor Device) [ 0.692283] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.692440] ACPI: Added _OSI(Processor Aggregator Device) [ 0.692596] ACPI: Added _OSI(Linux-Dell-Video) [ 0.692742] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.692787] random: fast init done [ 0.697308] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.697848] xen: registering gsi 9 triggering 0 polarity 1 [ 0.698316] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.703207] ACPI: Interpreter enabled [ 0.703393] ACPI: (supports S0 S4 S5) [ 0.703777] ACPI: Using IOAPIC for interrupt routing [ 0.704072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.704600] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.725935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.726130] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.727262] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.727505] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.730106] PCI host bridge to bus 0000:00 [ 0.730261] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.730421] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.730610] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.730769] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.730935] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.731092] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.731376] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.731624] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.731774] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.732018] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.732260] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.732548] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.732764] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.733105] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.733367] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.733437] pci 0000:00:02.0: enabling Extended Tags [ 0.733671] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.733836] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.733972] pci 0000:00:09.0: enabling Extended Tags [ 0.734195] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.734351] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.734396] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.734414] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.734432] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.734451] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.734469] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.734487] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.734531] pci 0000:00:11.0: set SATA to AHCI mode [ 0.734844] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.734881] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.735085] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.735121] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.735399] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.735442] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.735607] pci 0000:00:12.2: supports D1 D2 [ 0.735609] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.735733] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.735769] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.735977] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.736013] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.736227] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.736275] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.736465] pci 0000:00:13.2: supports D1 D2 [ 0.736467] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.736592] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.736922] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.736983] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.737001] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.737019] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.737037] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.737055] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.737255] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.737511] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.737734] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.737935] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.738129] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.738288] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.738468] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.738622] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.738818] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.738965] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.739114] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.739280] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.739581] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.739614] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.739638] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.739660] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.739689] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.739702] pci 0000:01:00.0: enabling Extended Tags [ 0.739889] pci 0000:01:00.0: supports D1 D2 [ 0.740044] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.740204] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.740210] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.740337] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.740385] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.740608] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.740711] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.740883] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.740959] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.741178] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.741349] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.741508] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.741539] pci_bus 0000:03: extended config space not accessible [ 0.741762] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.741802] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.741862] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.741882] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.742189] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.742357] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.742364] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.742366] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.742368] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.742369] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.742371] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.742372] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.742373] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.742375] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.742376] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.742377] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.742378] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.742379] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.742421] pci_bus 0000:00: on NUMA node 0 [ 0.742602] xen: registering gsi 13 triggering 1 polarity 0 [ 0.744864] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.745142] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.745407] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.745659] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.745873] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.746167] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.746434] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.746691] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.746877] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.747132] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.747437] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.747686] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.747872] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.748150] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.748404] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.748698] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.748874] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.749128] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.749411] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.749665] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.749915] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.750161] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.750440] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.750693] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.750868] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.751153] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.751409] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.751695] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.751873] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.752126] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.752384] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.752680] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.753070] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.753364] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.753652] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.753899] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.754189] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.754484] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.754781] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.755134] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.755710] xen:balloon: Initialising balloon driver [ 0.755969] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.756029] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.756282] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.756441] vgaarb: loaded [ 0.756909] SCSI subsystem initialized [ 0.757127] libata version 3.00 loaded. [ 0.757127] ACPI: bus type USB registered [ 0.757127] usbcore: registered new interface driver usbfs [ 0.757304] usbcore: registered new interface driver hub [ 0.757880] usbcore: registered new device driver usb [ 0.758067] pps_core: LinuxPPS API ver. 1 registered [ 0.758245] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.758513] PTP clock support registered [ 0.758844] EDAC MC: Ver: 3.0.0 [ 0.759193] Advanced Linux Sound Architecture Driver Initialized. [ 0.759193] PCI: Using ACPI for IRQ routing [ 0.764494] PCI: pci_cache_line_size set to 64 bytes [ 0.764652] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.764773] Expanded resource Reserved due to conflict with Reserved [ 0.764929] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.764933] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.765153] NetLabel: Initializing [ 0.765298] NetLabel: domain hash size = 128 [ 0.765480] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.765712] NetLabel: unlabeled traffic allowed by default [ 0.766197] clocksource: Switched to clocksource tsc-early [ 0.783346] VFS: Disk quotas dquot_6.6.0 [ 0.783581] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.783811] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.784127] pnp: PnP ACPI init [ 0.784705] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.784749] xen: registering gsi 8 triggering 1 polarity 0 [ 0.784805] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.785245] xen: registering gsi 4 triggering 1 polarity 0 [ 0.785247] Already setup the GSI :4 [ 0.785548] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.785974] xen: registering gsi 3 triggering 1 polarity 0 [ 0.786074] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.787634] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.787805] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.787992] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.788148] system 00:04: [io 0x0dff] has been reserved [ 0.788308] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.788468] system 00:04: [io 0x0eff] has been reserved [ 0.788658] system 00:04: [io 0x040b] has been reserved [ 0.788817] system 00:04: [io 0x04d6] has been reserved [ 0.788968] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.789142] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.789297] system 00:04: [io 0x0c14] has been reserved [ 0.789451] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.789603] system 00:04: [io 0x0c6c] has been reserved [ 0.789755] system 00:04: [io 0x0c6f] has been reserved [ 0.789958] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.790114] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.790269] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.790447] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.790601] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.790756] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.790923] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.791076] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.791233] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.791430] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.791609] system 00:04: [io 0x0950] has been reserved [ 0.791794] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.791869] pnp 00:05: [irq 0 disabled] [ 0.791922] system 00:05: [io 0x0ca8] has been reserved [ 0.792077] system 00:05: [io 0x0cac] has been reserved [ 0.792239] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.793701] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.793892] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.794206] pnp: PnP ACPI: found 7 devices [ 0.808545] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.808850] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.809007] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.809167] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.809379] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.809537] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.809706] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.809878] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.810066] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.810326] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.810328] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.810329] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.810331] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.810332] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.810333] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.810334] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.810335] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.810337] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.810338] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.810339] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.810341] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.810342] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.810343] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.810345] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.810347] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.810348] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.810349] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.810350] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.810351] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.810352] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.810354] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.810355] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.810356] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.810357] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.810358] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.810359] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.810498] NET: Registered protocol family 2 [ 0.810953] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.811224] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.811412] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.811608] TCP: Hash tables configured (established 4096 bind 4096) [ 0.811852] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.812018] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.812308] NET: Registered protocol family 1 [ 0.813218] RPC: Registered named UNIX socket transport module. [ 0.813385] RPC: Registered udp transport module. [ 0.813594] RPC: Registered tcp transport module. [ 0.813737] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.814377] xen: registering gsi 16 triggering 0 polarity 1 [ 0.814428] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.941136] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 123916 usecs [ 0.941524] xen: registering gsi 16 triggering 0 polarity 1 [ 0.941539] Already setup the GSI :16 [ 0.941887] xen: registering gsi 17 triggering 0 polarity 1 [ 0.941940] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.942104] xen: registering gsi 18 triggering 0 polarity 1 [ 0.942128] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.942267] xen: registering gsi 18 triggering 0 polarity 1 [ 0.942269] Already setup the GSI :18 [ 0.942556] xen: registering gsi 19 triggering 0 polarity 1 [ 0.942575] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.942760] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.943089] PCI: CLS 64 bytes, default 64 [ 0.943212] Unpacking initramfs... [ 1.365721] Freeing initrd memory: 27456K [ 1.366053] kvm: no hardware support [ 1.366194] has_svm: svm not available [ 1.366337] kvm: no hardware support [ 1.368659] Scanning for low memory corruption every 60 seconds [ 1.369832] Initialise system trusted keyrings [ 1.370109] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.372746] NFS: Registering the id_resolver key type [ 1.372915] Key type id_resolver registered [ 1.373083] Key type id_legacy registered [ 1.379269] Key type asymmetric registered [ 1.379416] Asymmetric key parser 'x509' registered [ 1.379583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.379867] io scheduler noop registered [ 1.380005] io scheduler deadline registered [ 1.380178] io scheduler cfq registered (default) [ 1.380324] io scheduler mq-deadline registered [ 1.380491] io scheduler kyber registered [ 1.381233] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.381384] xen: registering gsi 52 triggering 0 polarity 0 [ 1.381414] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.381731] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.381888] xen: registering gsi 53 triggering 0 polarity 0 [ 1.381900] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.382112] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.382306] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.382702] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.382995] ACPI: Power Button [PWRF] [ 1.383826] Warning: Processor Platform Limit not supported. [ 1.384181] xen:xen_evtchn: Event-channel device installed [ 1.384411] xen_pciback: backend is vpci [ 1.385259] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.406437] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.407308] hpet_acpi_add: no address or irqs in _CRS [ 1.407574] Non-volatile memory driver v1.3 [ 1.407766] AMD IOMMUv2 driver by Joerg Roedel [ 1.407935] AMD IOMMUv2 functionality not available on this system [ 1.411670] loop: module loaded [ 1.416585] ahci 0000:00:11.0: version 3.0 [ 1.416718] xen: registering gsi 22 triggering 0 polarity 1 [ 1.416753] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.416905] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.417213] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.418153] scsi host0: ahci [ 1.418662] scsi host1: ahci [ 1.419063] scsi host2: ahci [ 1.419498] scsi host3: ahci [ 1.419785] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.420054] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.420291] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.420525] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.421032] tun: Universal TUN/TAP device driver, 1.6 [ 1.421304] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.421454] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.421625] sky2: driver version 1.30 [ 1.421868] xen_netfront: Initialising Xen virtual ethernet driver [ 1.422209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.422361] ehci-pci: EHCI PCI platform driver [ 1.422600] xen: registering gsi 17 triggering 0 polarity 1 [ 1.422604] Already setup the GSI :17 [ 1.422846] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.423062] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.423314] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.423570] ehci-pci 0000:00:12.2: debug port 1 [ 1.423858] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.430857] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.431098] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.431336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.431567] usb usb1: Product: EHCI Host Controller [ 1.431734] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.431886] usb usb1: SerialNumber: 0000:00:12.2 [ 1.432176] hub 1-0:1.0: USB hub found [ 1.432333] hub 1-0:1.0: 6 ports detected [ 1.432731] xen: registering gsi 19 triggering 0 polarity 1 [ 1.432734] Already setup the GSI :19 [ 1.432945] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.433162] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.433401] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.433652] ehci-pci 0000:00:13.2: debug port 1 [ 1.433916] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.440834] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.441027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.441262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.441520] usb usb2: Product: EHCI Host Controller [ 1.441662] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.441822] usb usb2: SerialNumber: 0000:00:13.2 [ 1.442094] hub 2-0:1.0: USB hub found [ 1.442241] hub 2-0:1.0: 6 ports detected [ 1.442558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.442738] ohci-pci: OHCI PCI platform driver [ 1.442961] xen: registering gsi 16 triggering 0 polarity 1 [ 1.442963] Already setup the GSI :16 [ 1.443132] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.443373] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.443704] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.499930] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.500196] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.500464] usb usb3: Product: OHCI PCI host controller [ 1.500608] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.500753] usb usb3: SerialNumber: 0000:00:12.0 [ 1.501046] hub 3-0:1.0: USB hub found [ 1.501196] hub 3-0:1.0: 3 ports detected [ 1.501555] xen: registering gsi 16 triggering 0 polarity 1 [ 1.501558] Already setup the GSI :16 [ 1.501744] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.501976] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.502245] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.557924] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.558165] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.558401] usb usb4: Product: OHCI PCI host controller [ 1.558557] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.558736] usb usb4: SerialNumber: 0000:00:12.1 [ 1.559017] hub 4-0:1.0: USB hub found [ 1.559168] hub 4-0:1.0: 3 ports detected [ 1.559500] xen: registering gsi 18 triggering 0 polarity 1 [ 1.559503] Already setup the GSI :18 [ 1.559668] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.559893] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.560221] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.615925] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.616192] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.616429] usb usb5: Product: OHCI PCI host controller [ 1.616573] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.616718] usb usb5: SerialNumber: 0000:00:13.0 [ 1.617022] hub 5-0:1.0: USB hub found [ 1.617171] hub 5-0:1.0: 3 ports detected [ 1.617499] xen: registering gsi 18 triggering 0 polarity 1 [ 1.617502] Already setup the GSI :18 [ 1.617665] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.617888] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.618164] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.673901] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.674145] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.674379] usb usb6: Product: OHCI PCI host controller [ 1.674522] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.674666] usb usb6: SerialNumber: 0000:00:13.1 [ 1.674970] hub 6-0:1.0: USB hub found [ 1.675144] hub 6-0:1.0: 3 ports detected [ 1.675424] uhci_hcd: USB Universal Host Controller Interface driver [ 1.675619] usbcore: registered new interface driver usblp [ 1.675812] usbcore: registered new interface driver usb-storage [ 1.675999] i8042: PNP: No PS/2 controller found. [ 1.676144] i8042: Probing ports directly. [ 1.679016] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.679204] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.679654] rtc_cmos 00:01: RTC can wake from S4 [ 1.680041] rtc_cmos 00:01: registered as rtc0 [ 1.680211] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.680516] device-mapper: uevent: version 1.0.3 [ 1.680829] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.681125] hidraw: raw HID events driver (C) Jiri Kosina [ 1.681533] usbcore: registered new interface driver usbhid [ 1.681680] usbhid: USB HID core driver [ 1.682865] Initializing XFRM netlink socket [ 1.683188] NET: Registered protocol family 10 [ 1.683669] Segment Routing with IPv6 [ 1.684307] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.684631] NET: Registered protocol family 17 [ 1.684830] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.685106] Key type dns_resolver registered [ 1.685968] mce: Using 2 MCE banks [ 1.686140] sched_clock: Marking stable (1655317133, 30582773)->(1692552444, -6652538) [ 1.687273] registered taskstats version 1 [ 1.687418] Loading compiled-in X.509 certificates [ 1.687953] Magic number: 13:383:490 [ 1.688204] acpi PNP0F13:00: hash matches [ 1.688389] console [netcon0] enabled [ 1.688527] netconsole: network logging started [ 1.688723] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.697482] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.697684] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.698839] ALSA device list: [ 1.699662] cfg80211: failed to load regulatory.db [ 1.699814] No soundcards found. [ 1.728871] ata1: SATA link down (SStatus 0 SControl 300) [ 1.731869] ata4: SATA link down (SStatus 0 SControl 300) [ 1.732050] ata2: SATA link down (SStatus 0 SControl 300) [ 1.732253] ata3: SATA link down (SStatus 0 SControl 300) [ 1.733461] Freeing unused kernel image memory: 1344K [ 1.737854] Write protecting the kernel read-only data: 18432k [ 1.738952] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.746858] Freeing unused kernel image memory: 1992K [ 1.748123] Freeing unused kernel image memory: 1444K [ 1.748274] Run /init as init process [ 1.867235] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.867494] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.868560] hub 1-3:1.0: USB hub found [ 1.868853] hub 1-3:1.0: 4 ports detected [ 1.927113] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.927592] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.927783] xen: registering gsi 48 triggering 0 polarity 0 [ 1.927831] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.928629] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a9:21 [ 1.929094] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.929250] xen: registering gsi 49 triggering 0 polarity 0 [ 1.929276] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.929903] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a9:22 [ 1.931116] mpt3sas version 26.100.00.00 loaded [ 1.931458] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.932042] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.932190] xen: registering gsi 24 triggering 0 polarity 0 [ 1.932223] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.932256] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 1.976439] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.976728] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.977117] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.977270] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x(____ptrval____)), size(65536) [ 1.977529] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.021704] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.021972] mpt2sas_cm0: sending diag reset !! [ 2.285633] random: crng init done [ 2.342846] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c71ccff4, max_idle_ns: 440795309360 ns [ 2.343229] clocksource: Switched to clocksource tsc [ 3.325765] mpt2sas_cm0: diag reset: SUCCESS [ 3.365310] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.365535] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.365768] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.399909] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.400216] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.400227] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.400697] mpt2sas_cm0: Protocol=( [ 3.400697] Initiator [ 3.400870] ,Target [ 3.401002] ), [ 3.401132] Capabilities=( [ 3.401260] Raid [ 3.401400] ,TLR [ 3.401543] ,EEDP [ 3.401672] ,Snapshot Buffer [ 3.401806] ,Diag Trace Buffer [ 3.401941] ,Task Set Full [ 3.402099] ,NCQ [ 3.402230] ) [ 3.402612] scsi host4: Fusion MPT SAS Host [ 3.410094] mpt2sas_cm0: sending port enable !! [ 5.000908] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5700), phys(8) [ 11.125836] mpt2sas_cm0: port enable: SUCCESS [ 11.127700] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.127953] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002886eb90) [ 11.128222] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5700), slot(0) [ 11.128490] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.129789] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.130981] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.205841] sd 4:0:0:0: [sda] Write Protect is off [ 11.206044] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.206596] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.281005] sda: sda1 sda2 < sda5 > [ 11.356899] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.186476] PM: Image not found (code -22) [ 12.559665] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.882308] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.319910] systemd-udevd[1525]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.648415] systemd-udevd[1549]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.648483] systemd-udevd[1551]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.680617] systemd-udevd[1538]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.680659] systemd-udevd[1526]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.700294] systemd-udevd[1526]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.700458] systemd-udevd[1538]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.700519] systemd-udevd[1549]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.700545] systemd-udevd[1551]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.696464] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.029338] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.092842] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.170176] Adding 1949692k swap on /dev/mapper/nocera1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.807861] systemd-udevd[1537]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.812997] xenbr0: port 1(eth0) entered blocking state [ 17.813168] xenbr0: port 1(eth0) entered disabled state [ 17.813364] device eth0 entered promiscuous mode [ 17.899079] bnx2 0000:02:00.0 eth0: using MSIX [ 17.907677] xenbr0: port 1(eth0) entered blocking state [ 17.907888] xenbr0: port 1(eth0) entered forwarding state [ 17.908081] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready