[ 0.000000] Linux version 4.19.80+ (osstest@nocera1) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Mon Nov 22 14:54:52 UTC 2021 [ 0.000000] Command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020061fff] usable [ 0.000000] Xen: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved [ 0.000000] Xen: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fec8ffff] reserved [ 0.000000] Xen: [mem 0x00000000fec94000-0x00000000feccffff] reserved [ 0.000000] Xen: [mem 0x00000000fecd4000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R415/0YFVT1, BIOS 2.2.1 09/16/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.031137] tsc: Fast TSC calibration using PIT [ 0.031142] tsc: Detected 2799.909 MHz processor [ 0.031144] tsc: Detected 2800.018 MHz TSC [ 0.052844] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.052850] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.052855] last_pfn = 0x20062 max_arch_pfn = 0x400000000 [ 0.052858] Disabled [ 0.052860] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.052869] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.052960] Scanning 1 areas for low memory corruption [ 0.054872] BRK [0x02a01000, 0x02a01fff] PGTABLE [ 0.127062] BRK [0x02a02000, 0x02a02fff] PGTABLE [ 0.129251] RAMDISK: [mem 0x04000000-0x05acffff] [ 0.129289] ACPI: Early table checksum verification disabled [ 0.144036] ACPI: RSDP 0x00000000000F1010 000024 (v02 DELL ) [ 0.144049] ACPI: XSDT 0x00000000000F1098 0000A4 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144102] ACPI: FACP 0x00000000BF6BBD3C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.144216] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20180810/tbfadt-674) [ 0.144229] ACPI: DSDT 0x00000000BF6AF000 0065E6 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.144239] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.144249] ACPI: FACS 0x00000000BF6BE000 000040 [ 0.144261] ACPI: APIC 0x00000000BF6BB478 000254 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144273] ACPI: SPCR 0x00000000BF6BB6DC 000050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144285] ACPI: HPET 0x00000000BF6BB730 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144297] ACPI: MCFG 0x00000000BF6BB76C 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144308] ACPI: WD__ 0x00000000BF6BB7AC 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144320] ACPI: SLIC 0x00000000BF6BB8E4 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144332] ACPI: ERST 0x00000000BF6B5788 000270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144343] ACPI: HEST 0x00000000BF6B59F8 000354 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144354] ACPI: BERT 0x00000000BF6B55E8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144366] ACPI: EINJ 0x00000000BF6B5618 000170 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144377] ACPI: IVRS 0x00000000BF6BBA68 0000B8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.144388] ACPI: SRAT 0x00000000BF6BBB24 000150 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.144400] ACPI: SLIT 0x00000000BF6BBCA0 000030 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.144411] ACPI: SS__ 0x00000000BF6BF000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.144423] ACPI: TCPA 0x00000000BF6BBCD4 000064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.144456] ACPI: Local APIC address 0xfee00000 [ 0.144459] Setting APIC routing to Xen PV. [ 0.145506] Zone ranges: [ 0.145511] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.145514] DMA32 [mem 0x0000000001000000-0x0000000020061fff] [ 0.145516] Normal empty [ 0.145517] Movable zone start for each node [ 0.145518] Early memory node ranges [ 0.145521] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.145522] node 0: [mem 0x0000000000100000-0x0000000020061fff] [ 0.145526] Reserved but unavailable: 1 pages [ 0.145529] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020061fff] [ 0.145534] On node 0 totalpages: 131071 [ 0.145536] DMA zone: 64 pages used for memmap [ 0.145537] DMA zone: 21 pages reserved [ 0.145539] DMA zone: 3997 pages, LIFO batch:0 [ 0.145732] DMA32 zone: 1986 pages used for memmap [ 0.145734] DMA32 zone: 127074 pages, LIFO batch:31 [ 0.152221] p2m virtual area at (____ptrval____), size is 40000000 [ 0.348267] Remapped 98 page(s) [ 0.348747] ACPI: PM-Timer IO Port: 0x808 [ 0.348754] ACPI: Local APIC address 0xfee00000 [ 0.348936] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.348994] IOAPIC[0]: apic_id 12, version 33, address 0xfec00000, GSI 0-23 [ 0.349003] IOAPIC[1]: apic_id 13, version 33, address 0xfec80000, GSI 24-55 [ 0.349041] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.349049] ACPI: IRQ0 used by override. [ 0.349050] ACPI: IRQ9 used by override. [ 0.349086] Using ACPI (MADT) for SMP configuration information [ 0.349091] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.349098] ACPI: SPCR: SPCR table version 1 [ 0.349103] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.349114] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.349144] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.349146] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.349148] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.349152] [mem 0x20062000-0xbf698fff] available for PCI devices [ 0.349157] Booting paravirtualized kernel on Xen [ 0.349159] Xen version: 4.16-rc (preserve-AD) [ 0.349166] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.507247] random: get_random_bytes called from start_kernel+0x8e/0x594 with crng_init=0 [ 0.507272] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.508668] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u262144 [ 0.508681] pcpu-alloc: s138264 r8192 d29672 u262144 alloc=1*2097152 [ 0.508683] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.508818] xen: PV spinlocks enabled [ 0.508826] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.508836] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.508842] Kernel command line: placeholder root=/dev/mapper/nocera0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.509267] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.509422] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.607083] software IO TLB: mapped [mem 0x1b000000-0x1f000000] (64MB) [ 0.613215] Memory: 388620K/524284K available (12312K kernel code, 1274K rwdata, 2652K rodata, 1344K init, 1660K bss, 135664K reserved, 0K cma-reserved) [ 0.613398] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.614898] rcu: Hierarchical RCU implementation. [ 0.614901] rcu: RCU event tracing is enabled. [ 0.614904] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.614907] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.615965] Using NULL legacy PIC [ 0.615968] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 0 [ 0.616056] xen:events: Using FIFO-based ABI [ 0.616108] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.616115] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.616122] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.616127] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.616133] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.616138] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.616143] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.616148] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.616154] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.616159] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.616168] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.616174] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.616179] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.616185] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.616190] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.622519] Console: colour VGA+ 80x25 [ 0.638259] console [tty0] enabled [ 0.638753] console [hvc0] enabled [ 0.638913] ACPI: Core revision 20180810 [ 0.645746] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.646004] Xen: using vcpuop timer interface [ 0.646015] installing Xen timer for CPU 0 [ 0.646266] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c51fbff9, max_idle_ns: 440795297444 ns [ 0.646595] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.03 BogoMIPS (lpj=2800018) [ 0.646873] pid_max: default: 32768 minimum: 301 [ 0.647081] Security Framework initialized [ 0.647565] SELinux: Initializing. [ 0.647777] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.647940] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.648592] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.648749] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.648907] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.649179] Spectre V2 : Mitigation: Full AMD retpoline [ 0.649332] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.649873] Freeing SMP alternatives memory: 36K [ 0.652776] cpu 0 spinlock event irq 57 [ 0.652937] VPMU disabled by hypervisor. [ 0.653300] Performance Events: PMU not available due to virtualization, using software events only. [ 0.653661] rcu: Hierarchical SRCU implementation. [ 0.654174] smp: Bringing up secondary CPUs ... [ 0.654514] installing Xen timer for CPU 1 [ 0.655067] cpu 1 spinlock event irq 69 [ 0.655630] installing Xen timer for CPU 2 [ 0.656168] cpu 2 spinlock event irq 76 [ 0.656745] installing Xen timer for CPU 3 [ 0.657221] cpu 3 spinlock event irq 83 [ 0.657736] installing Xen timer for CPU 4 [ 0.658206] cpu 4 spinlock event irq 90 [ 0.658740] installing Xen timer for CPU 5 [ 0.659232] cpu 5 spinlock event irq 97 [ 0.659736] installing Xen timer for CPU 6 [ 0.660141] cpu 6 spinlock event irq 104 [ 0.660737] installing Xen timer for CPU 7 [ 0.661200] cpu 7 spinlock event irq 111 [ 0.661562] smp: Brought up 1 node, 8 CPUs [ 0.661715] smpboot: Max logical packages: 1 [ 0.662138] devtmpfs: initialized [ 0.662672] x86/mm: Memory block size: 128MB [ 0.663757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.664018] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.664444] RTC time: 15:43:02, date: 11/23/21 [ 0.664825] NET: Registered protocol family 16 [ 0.665013] xen:grant_table: Grant tables using version 1 layout [ 0.665250] Grant table initialized [ 0.665789] audit: initializing netlink subsys (disabled) [ 0.665979] audit: type=2000 audit(1637682183.385:1): state=initialized audit_enabled=0 res=1 [ 0.666693] node 0 link 1: io port [e000, ffff] [ 0.666711] TOM: 00000000c0000000 aka 3072M [ 0.666896] node 0 link 1: mmio [e9800000, e9ffffff] [ 0.666902] node 0 link 1: mmio [ea000000, ef2fffff] [ 0.666913] node 0 link 1: mmio [fec80000, fecbffff] [ 0.666918] TOM2: 0000000840000000 aka 33792M [ 0.667066] bus: [bus 00-3f] on node 0 link 1 [ 0.667068] bus: 00 [io 0x0000-0xffff] [ 0.667069] bus: 00 [mem 0xc0000000-0xfec7ffff] [ 0.667070] bus: 00 [mem 0xfec80000-0xffffffff] [ 0.667070] bus: 00 [mem 0x840000000-0xfcffffffff] [ 0.667669] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.667926] ACPI: bus type PCI registered [ 0.668583] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.668871] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.681473] PCI: Using configuration type 1 for base access [ 0.688721] ACPI: Added _OSI(Module Device) [ 0.688902] ACPI: Added _OSI(Processor Device) [ 0.689050] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.689204] ACPI: Added _OSI(Processor Aggregator Device) [ 0.689376] ACPI: Added _OSI(Linux-Dell-Video) [ 0.689529] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.693947] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.694474] xen: registering gsi 9 triggering 0 polarity 1 [ 0.694953] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.695571] random: fast init done [ 0.699473] ACPI: Interpreter enabled [ 0.699580] ACPI: (supports S0 S4 S5) [ 0.700581] ACPI: Using IOAPIC for interrupt routing [ 0.700813] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.701360] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.719209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.719419] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.720261] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.720525] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.722584] PCI host bridge to bus 0000:00 [ 0.722763] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.722944] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.723100] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.723258] pci_bus 0000:00: root bus resource [io 0xe000-0xffff window] [ 0.723417] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.723553] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.723793] pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfec7ffff window] [ 0.724059] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff window] [ 0.724331] pci_bus 0000:00: root bus resource [mem 0xea000000-0xef2fffff window] [ 0.724553] pci_bus 0000:00: root bus resource [mem 0xe9800000-0xe9ffffff window] [ 0.724791] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.725030] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.725242] pci 0000:00:00.0: [1002:5a12] type 00 class 0x060000 [ 0.725584] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.725805] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.725873] pci 0000:00:02.0: enabling Extended Tags [ 0.726106] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.726553] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.726553] pci 0000:00:09.0: enabling Extended Tags [ 0.726581] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.726727] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.726771] pci 0000:00:11.0: reg 0x10: [io 0xecd0-0xecd7] [ 0.726789] pci 0000:00:11.0: reg 0x14: [io 0xecf0-0xecf3] [ 0.726808] pci 0000:00:11.0: reg 0x18: [io 0xecd8-0xecdf] [ 0.726825] pci 0000:00:11.0: reg 0x1c: [io 0xecf4-0xecf7] [ 0.726842] pci 0000:00:11.0: reg 0x20: [io 0xecb0-0xecbf] [ 0.726860] pci 0000:00:11.0: reg 0x24: [mem 0xef2ff800-0xef2ffbff] [ 0.726908] pci 0000:00:11.0: set SATA to AHCI mode [ 0.727561] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.727561] pci 0000:00:12.0: reg 0x10: [mem 0xef2fb000-0xef2fbfff] [ 0.727616] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.727616] pci 0000:00:12.1: reg 0x10: [mem 0xef2fc000-0xef2fcfff] [ 0.727715] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.727758] pci 0000:00:12.2: reg 0x10: [mem 0xef2ffe00-0xef2ffeff] [ 0.727920] pci 0000:00:12.2: supports D1 D2 [ 0.727922] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.728045] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.728082] pci 0000:00:13.0: reg 0x10: [mem 0xef2fd000-0xef2fdfff] [ 0.728557] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.728557] pci 0000:00:13.1: reg 0x10: [mem 0xef2fe000-0xef2fefff] [ 0.728608] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.728608] pci 0000:00:13.2: reg 0x10: [mem 0xef2fff00-0xef2fffff] [ 0.728769] pci 0000:00:13.2: supports D1 D2 [ 0.728771] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.728897] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.729575] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018f [ 0.729575] pci 0000:00:14.1: reg 0x10: [io 0xece0-0xece7] [ 0.729575] pci 0000:00:14.1: reg 0x14: [io 0xecf8-0xecfb] [ 0.729575] pci 0000:00:14.1: reg 0x18: [io 0xece8-0xecef] [ 0.729575] pci 0000:00:14.1: reg 0x1c: [io 0xecfc-0xecff] [ 0.729575] pci 0000:00:14.1: reg 0x20: [io 0xecc0-0xeccf] [ 0.729608] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.729733] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.729927] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.730115] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.730601] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.730664] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.730664] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.730758] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.730952] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.731097] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.731578] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.731596] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.731676] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.731709] pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff] [ 0.731732] pci 0000:01:00.0: reg 0x14: [mem 0xef1f0000-0xef1fffff 64bit] [ 0.731754] pci 0000:01:00.0: reg 0x1c: [mem 0xef180000-0xef1bffff 64bit] [ 0.731782] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref] [ 0.731794] pci 0000:01:00.0: enabling Extended Tags [ 0.732066] pci 0000:01:00.0: supports D1 D2 [ 0.732180] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.732337] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.732342] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.732654] pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000 [ 0.732654] pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xebffffff 64bit] [ 0.732744] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.732804] pci 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0000:00:09.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link) [ 0.733177] pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000 [ 0.733224] pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xedffffff 64bit] [ 0.733443] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.733629] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.733802] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.733832] pci_bus 0000:03: extended config space not accessible [ 0.734040] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 [ 0.734079] pci 0000:03:04.0: reg 0x10: [mem 0xe9800000-0xe9ffffff pref] [ 0.734099] pci 0000:03:04.0: reg 0x14: [mem 0xeeffc000-0xeeffffff] [ 0.734119] pci 0000:03:04.0: reg 0x18: [mem 0xee000000-0xee7fffff] [ 0.734550] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.734560] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.734566] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.734568] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.734570] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.734572] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.734573] pci 0000:00:14.4: bridge window [io 0xe000-0xffff window] (subtractive decode) [ 0.734574] pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.734576] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.734577] pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff window] (subtractive decode) [ 0.734578] pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff window] (subtractive decode) [ 0.734580] pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff window] (subtractive decode) [ 0.734581] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff window] (subtractive decode) [ 0.734582] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.734623] pci_bus 0000:00: on NUMA node 0 [ 0.734758] xen: registering gsi 13 triggering 1 polarity 0 [ 0.736810] ACPI: PCI Interrupt Link [LN24] (IRQs *24) [ 0.737057] ACPI: PCI Interrupt Link [LN25] (IRQs *25) [ 0.737312] ACPI: PCI Interrupt Link [LN26] (IRQs *26) [ 0.737526] ACPI: PCI Interrupt Link [LN27] (IRQs *27) [ 0.737639] ACPI: PCI Interrupt Link [LN28] (IRQs *28) [ 0.737924] ACPI: PCI Interrupt Link [LN29] (IRQs *29) [ 0.738164] ACPI: PCI Interrupt Link [LN30] (IRQs *30) [ 0.738422] ACPI: PCI Interrupt Link [LN31] (IRQs *31) [ 0.738641] ACPI: PCI Interrupt Link [LN32] (IRQs *32) [ 0.738879] ACPI: PCI Interrupt Link [LN33] (IRQs *33) [ 0.739126] ACPI: PCI Interrupt Link [LN34] (IRQs *34) [ 0.739370] ACPI: PCI Interrupt Link [LN35] (IRQs *35) [ 0.739636] ACPI: PCI Interrupt Link [LN36] (IRQs *36) [ 0.739876] ACPI: PCI Interrupt Link [LN37] (IRQs *37) [ 0.740115] ACPI: PCI Interrupt Link [LN38] (IRQs *38) [ 0.740330] ACPI: PCI Interrupt Link [LN39] (IRQs *39) [ 0.740598] ACPI: PCI Interrupt Link [LN40] (IRQs *40) [ 0.740889] ACPI: PCI Interrupt Link [LN41] (IRQs *41) [ 0.741126] ACPI: PCI Interrupt Link [LN42] (IRQs *42) [ 0.741345] ACPI: PCI Interrupt Link [LN43] (IRQs *43) [ 0.741589] ACPI: PCI Interrupt Link [LN44] (IRQs *44) [ 0.741840] ACPI: PCI Interrupt Link [LN45] (IRQs *45) [ 0.742104] ACPI: PCI Interrupt Link [LN46] (IRQs *46) [ 0.742340] ACPI: PCI Interrupt Link [LN47] (IRQs *47) [ 0.742588] ACPI: PCI Interrupt Link [LN48] (IRQs *48) [ 0.742826] ACPI: PCI Interrupt Link [LN49] (IRQs *49) [ 0.743070] ACPI: PCI Interrupt Link [LN50] (IRQs *50) [ 0.743355] ACPI: PCI Interrupt Link [LN51] (IRQs *51) [ 0.743596] ACPI: PCI Interrupt Link [LN52] (IRQs *52) [ 0.743834] ACPI: PCI Interrupt Link [LN53] (IRQs *53) [ 0.744072] ACPI: PCI Interrupt Link [LN54] (IRQs *54) [ 0.744306] ACPI: PCI Interrupt Link [LN55] (IRQs *55) [ 0.744747] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.745034] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.745311] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.745616] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.745898] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.746196] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0 [ 0.746467] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.746668] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.747192] xen:balloon: Initialising balloon driver [ 0.747657] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.747791] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.748062] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.748224] vgaarb: loaded [ 0.748479] SCSI subsystem initialized [ 0.748667] libata version 3.00 loaded. [ 0.748667] ACPI: bus type USB registered [ 0.748840] usbcore: registered new interface driver usbfs [ 0.749017] usbcore: registered new interface driver hub [ 0.749556] usbcore: registered new device driver usb [ 0.749596] pps_core: LinuxPPS API ver. 1 registered [ 0.749744] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.750029] PTP clock support registered [ 0.750570] EDAC MC: Ver: 3.0.0 [ 0.750674] Advanced Linux Sound Architecture Driver Initialized. [ 0.751585] PCI: Using ACPI for IRQ routing [ 0.754549] PCI: pci_cache_line_size set to 64 bytes [ 0.755594] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.755754] Expanded resource Reserved due to conflict with Reserved [ 0.755914] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.755917] e820: reserve RAM buffer [mem 0x20062000-0x23ffffff] [ 0.756153] NetLabel: Initializing [ 0.756298] NetLabel: domain hash size = 128 [ 0.756449] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.757575] NetLabel: unlabeled traffic allowed by default [ 0.757984] clocksource: Switched to clocksource tsc-early [ 0.774503] VFS: Disk quotas dquot_6.6.0 [ 0.774750] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.774966] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.775312] pnp: PnP ACPI init [ 0.775777] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.775820] xen: registering gsi 8 triggering 1 polarity 0 [ 0.775872] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.776299] xen: registering gsi 4 triggering 1 polarity 0 [ 0.776301] Already setup the GSI :4 [ 0.776608] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.777008] xen: registering gsi 3 triggering 1 polarity 0 [ 0.777116] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.778650] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.778832] system 00:04: [io 0x0900-0x093f] has been reserved [ 0.778987] system 00:04: [io 0x0d00-0x0dfe] has been reserved [ 0.779146] system 00:04: [io 0x0dff] has been reserved [ 0.779298] system 00:04: [io 0x0e00-0x0efe] has been reserved [ 0.779453] system 00:04: [io 0x0eff] has been reserved [ 0.779619] system 00:04: [io 0x040b] has been reserved [ 0.779797] system 00:04: [io 0x04d6] has been reserved [ 0.779949] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.780133] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.780288] system 00:04: [io 0x0c14] has been reserved [ 0.780441] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.780601] system 00:04: [io 0x0c6c] has been reserved [ 0.780755] system 00:04: [io 0x0c6f] has been reserved [ 0.780909] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.781070] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.781266] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.781422] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.781592] system 00:04: [io 0x0cd8-0x0cdb] has been reserved [ 0.781745] system 00:04: [io 0x0cdc-0x0cdf] has been reserved [ 0.781900] system 00:04: [io 0x0ca0-0x0ca7] has been reserved [ 0.782062] system 00:04: [io 0x0ca9-0x0cab] has been reserved [ 0.782222] system 00:04: [io 0x0cad-0x0caf] has been reserved [ 0.782375] system 00:04: [io 0x0cb0-0x0cb7] has been reserved [ 0.782595] system 00:04: [io 0x0950] has been reserved [ 0.782760] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.782845] pnp 00:05: [irq 0 disabled] [ 0.782892] system 00:05: [io 0x0ca8] has been reserved [ 0.783049] system 00:05: [io 0x0cac] has been reserved [ 0.783212] system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 0.784635] system 00:06: [mem 0xfec90000-0xfec93fff] has been reserved [ 0.784808] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.785116] pnp: PnP ACPI: found 7 devices [ 0.799375] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.799654] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.799810] pci 0000:00:02.0: bridge window [io 0xf000-0xffff] [ 0.799970] pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff] [ 0.800144] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.800299] pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff] [ 0.800473] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.800657] pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff] [ 0.800834] pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref] [ 0.801099] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.801101] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.801103] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.801104] pci_bus 0000:00: resource 7 [io 0xe000-0xffff window] [ 0.801105] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.801106] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.801108] pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.801109] pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.801110] pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.801111] pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.801113] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.801115] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.801116] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff] [ 0.801118] pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff] [ 0.801120] pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff] [ 0.801121] pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref] [ 0.801122] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window] [ 0.801123] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window] [ 0.801124] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window] [ 0.801126] pci_bus 0000:03: resource 7 [io 0xe000-0xffff window] [ 0.801127] pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff window] [ 0.801128] pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.801129] pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff window] [ 0.801130] pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff window] [ 0.801131] pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff window] [ 0.801132] pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff window] [ 0.801134] pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff window] [ 0.801276] NET: Registered protocol family 2 [ 0.801670] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.801937] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.802148] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.802339] TCP: Hash tables configured (established 4096 bind 4096) [ 0.802597] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.802757] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.802998] NET: Registered protocol family 1 [ 0.803907] RPC: Registered named UNIX socket transport module. [ 0.804110] RPC: Registered udp transport module. [ 0.804262] RPC: Registered tcp transport module. [ 0.804404] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.805206] xen: registering gsi 16 triggering 0 polarity 1 [ 0.805259] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.932930] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 124925 usecs [ 0.933283] xen: registering gsi 16 triggering 0 polarity 1 [ 0.933300] Already setup the GSI :16 [ 0.933638] xen: registering gsi 17 triggering 0 polarity 1 [ 0.933710] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.933875] xen: registering gsi 18 triggering 0 polarity 1 [ 0.933898] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.934073] xen: registering gsi 18 triggering 0 polarity 1 [ 0.934075] Already setup the GSI :18 [ 0.934377] xen: registering gsi 19 triggering 0 polarity 1 [ 0.934393] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.934584] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.934829] PCI: CLS 64 bytes, default 64 [ 0.934952] Unpacking initramfs... [ 1.347465] Freeing initrd memory: 27456K [ 1.347774] kvm: no hardware support [ 1.347914] has_svm: svm not available [ 1.348081] kvm: no hardware support [ 1.350237] Scanning for low memory corruption every 60 seconds [ 1.351523] Initialise system trusted keyrings [ 1.351830] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.354398] NFS: Registering the id_resolver key type [ 1.354562] Key type id_resolver registered [ 1.354704] Key type id_legacy registered [ 1.360926] Key type asymmetric registered [ 1.361076] Asymmetric key parser 'x509' registered [ 1.361240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.361522] io scheduler noop registered [ 1.361669] io scheduler deadline registered [ 1.361843] io scheduler cfq registered (default) [ 1.361985] io scheduler mq-deadline registered [ 1.362131] io scheduler kyber registered [ 1.362911] PCI Interrupt Link [LN52] enabled at IRQ 52 [ 1.363060] xen: registering gsi 52 triggering 0 polarity 0 [ 1.363091] xen: --> pirq=52 -> irq=52 (gsi=52) [ 1.363384] PCI Interrupt Link [LN53] enabled at IRQ 53 [ 1.363529] xen: registering gsi 53 triggering 0 polarity 0 [ 1.363541] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.363780] pcieport 0000:00:02.0: Signaling PME with IRQ 114 [ 1.363999] pcieport 0000:00:09.0: Signaling PME with IRQ 115 [ 1.364387] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.364657] ACPI: Power Button [PWRF] [ 1.365426] Warning: Processor Platform Limit not supported. [ 1.365793] xen:xen_evtchn: Event-channel device installed [ 1.366029] xen_pciback: backend is vpci [ 1.366870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.388075] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.388936] hpet_acpi_add: no address or irqs in _CRS [ 1.389183] Non-volatile memory driver v1.3 [ 1.389379] AMD IOMMUv2 driver by Joerg Roedel [ 1.389528] AMD IOMMUv2 functionality not available on this system [ 1.393260] loop: module loaded [ 1.398136] ahci 0000:00:11.0: version 3.0 [ 1.398269] xen: registering gsi 22 triggering 0 polarity 1 [ 1.398304] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.398440] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.398695] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.399715] scsi host0: ahci [ 1.400148] scsi host1: ahci [ 1.400503] scsi host2: ahci [ 1.401013] scsi host3: ahci [ 1.401250] ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22 [ 1.401493] ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22 [ 1.401749] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22 [ 1.401994] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22 [ 1.402470] tun: Universal TUN/TAP device driver, 1.6 [ 1.402815] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.402996] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.403190] sky2: driver version 1.30 [ 1.403406] xen_netfront: Initialising Xen virtual ethernet driver [ 1.403694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.403842] ehci-pci: EHCI PCI platform driver [ 1.404099] xen: registering gsi 17 triggering 0 polarity 1 [ 1.404106] Already setup the GSI :17 [ 1.404328] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.404576] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.404809] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.405061] ehci-pci 0000:00:12.2: debug port 1 [ 1.405328] ehci-pci 0000:00:12.2: irq 17, io mem 0xef2ffe00 [ 1.411613] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.411812] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.412045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.412274] usb usb1: Product: EHCI Host Controller [ 1.412413] usb usb1: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.412579] usb usb1: SerialNumber: 0000:00:12.2 [ 1.412881] hub 1-0:1.0: USB hub found [ 1.413028] hub 1-0:1.0: 6 ports detected [ 1.413390] xen: registering gsi 19 triggering 0 polarity 1 [ 1.413393] Already setup the GSI :19 [ 1.413587] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.413794] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.414069] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.414317] ehci-pci 0000:00:13.2: debug port 1 [ 1.414547] ehci-pci 0000:00:13.2: irq 19, io mem 0xef2fff00 [ 1.421638] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.421828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.422060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.422298] usb usb2: Product: EHCI Host Controller [ 1.422456] usb usb2: Manufacturer: Linux 4.19.80+ ehci_hcd [ 1.422634] usb usb2: SerialNumber: 0000:00:13.2 [ 1.422899] hub 2-0:1.0: USB hub found [ 1.423045] hub 2-0:1.0: 6 ports detected [ 1.423345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.423498] ohci-pci: OHCI PCI platform driver [ 1.423715] xen: registering gsi 16 triggering 0 polarity 1 [ 1.423717] Already setup the GSI :16 [ 1.423905] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.424138] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.424434] ohci-pci 0000:00:12.0: irq 16, io mem 0xef2fb000 [ 1.480681] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.480920] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.481151] usb usb3: Product: OHCI PCI host controller [ 1.481318] usb usb3: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.481460] usb usb3: SerialNumber: 0000:00:12.0 [ 1.481742] hub 3-0:1.0: USB hub found [ 1.481890] hub 3-0:1.0: 3 ports detected [ 1.482239] xen: registering gsi 16 triggering 0 polarity 1 [ 1.482242] Already setup the GSI :16 [ 1.482403] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.482654] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.482919] ohci-pci 0000:00:12.1: irq 16, io mem 0xef2fc000 [ 1.538704] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.538978] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.539212] usb usb4: Product: OHCI PCI host controller [ 1.539353] usb usb4: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.539496] usb usb4: SerialNumber: 0000:00:12.1 [ 1.539766] hub 4-0:1.0: USB hub found [ 1.539940] hub 4-0:1.0: 3 ports detected [ 1.540262] xen: registering gsi 18 triggering 0 polarity 1 [ 1.540265] Already setup the GSI :18 [ 1.540428] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.540648] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.540927] ohci-pci 0000:00:13.0: irq 18, io mem 0xef2fd000 [ 1.596707] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.596947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.597219] usb usb5: Product: OHCI PCI host controller [ 1.597387] usb usb5: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.597529] usb usb5: SerialNumber: 0000:00:13.0 [ 1.597811] hub 5-0:1.0: USB hub found [ 1.597959] hub 5-0:1.0: 3 ports detected [ 1.598278] xen: registering gsi 18 triggering 0 polarity 1 [ 1.598281] Already setup the GSI :18 [ 1.598451] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.598695] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.598953] ohci-pci 0000:00:13.1: irq 18, io mem 0xef2fe000 [ 1.654736] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 [ 1.654975] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.655208] usb usb6: Product: OHCI PCI host controller [ 1.655382] usb usb6: Manufacturer: Linux 4.19.80+ ohci_hcd [ 1.655525] usb usb6: SerialNumber: 0000:00:13.1 [ 1.655804] hub 6-0:1.0: USB hub found [ 1.655978] hub 6-0:1.0: 3 ports detected [ 1.656253] uhci_hcd: USB Universal Host Controller Interface driver [ 1.656446] usbcore: registered new interface driver usblp [ 1.656629] usbcore: registered new interface driver usb-storage [ 1.656832] i8042: PNP: No PS/2 controller found. [ 1.656976] i8042: Probing ports directly. [ 1.659961] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.660144] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.660616] rtc_cmos 00:01: RTC can wake from S4 [ 1.661074] rtc_cmos 00:01: registered as rtc0 [ 1.661245] rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram [ 1.661575] device-mapper: uevent: version 1.0.3 [ 1.661831] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.662134] hidraw: raw HID events driver (C) Jiri Kosina [ 1.662582] usbcore: registered new interface driver usbhid [ 1.662729] usbhid: USB HID core driver [ 1.663962] Initializing XFRM netlink socket [ 1.664284] NET: Registered protocol family 10 [ 1.664763] Segment Routing with IPv6 [ 1.665382] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.665711] NET: Registered protocol family 17 [ 1.665865] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.666152] Key type dns_resolver registered [ 1.666988] mce: Using 2 MCE banks [ 1.667154] sched_clock: Marking stable (1636575717, 30344129)->(1672625447, -5705601) [ 1.668298] registered taskstats version 1 [ 1.668442] Loading compiled-in X.509 certificates [ 1.668933] Magic number: 13:36:741 [ 1.669199] acpi LNXCPU:3d: hash matches [ 1.669381] workqueue writeback: hash matches [ 1.669537] console [netcon0] enabled [ 1.669706] netconsole: network logging started [ 1.669921] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.678505] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.680261] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 1.680529] cfg80211: failed to load regulatory.db [ 1.680706] ALSA device list: [ 1.680844] No soundcards found. [ 1.711648] ata4: SATA link down (SStatus 0 SControl 300) [ 1.711830] ata1: SATA link down (SStatus 0 SControl 300) [ 1.712011] ata3: SATA link down (SStatus 0 SControl 300) [ 1.712591] ata2: SATA link down (SStatus 0 SControl 300) [ 1.713805] Freeing unused kernel image memory: 1344K [ 1.718657] Write protecting the kernel read-only data: 18432k [ 1.727018] Freeing unused kernel image memory: 1992K [ 1.728256] Freeing unused kernel image memory: 1444K [ 1.728408] Run /init as init process [ 1.731585] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.808485] usb 1-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 1.808772] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.809760] hub 1-3:1.0: USB hub found [ 1.809976] hub 1-3:1.0: 4 ports detected [ 1.913491] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014) [ 1.914008] PCI Interrupt Link [LN48] enabled at IRQ 48 [ 1.914161] xen: registering gsi 48 triggering 0 polarity 0 [ 1.914206] xen: --> pirq=48 -> irq=48 (gsi=48) [ 1.914951] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr c4:54:44:da:a7:02 [ 1.915383] PCI Interrupt Link [LN49] enabled at IRQ 49 [ 1.915547] xen: registering gsi 49 triggering 0 polarity 0 [ 1.915590] xen: --> pirq=49 -> irq=49 (gsi=49) [ 1.916234] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr c4:54:44:da:a7:03 [ 1.918400] mpt3sas version 26.100.00.00 loaded [ 1.918843] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.919411] PCI Interrupt Link [LN24] enabled at IRQ 24 [ 1.919569] xen: registering gsi 24 triggering 0 polarity 0 [ 1.919594] xen: --> pirq=24 -> irq=24 (gsi=24) [ 1.919623] mpt2sas_cm0: 32 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (420892 kB) [ 1.960326] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 1.960603] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 8, max_msix_vectors: -1 [ 1.960988] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 117 [ 1.961134] mpt2sas_cm0: iomem(0x00000000ef1f0000), mapped(0x(____ptrval____)), size(65536) [ 1.961394] mpt2sas_cm0: ioport(0x000000000000fc00), size(256) [ 2.005525] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 2.005772] mpt2sas_cm0: sending diag reset !! [ 2.342591] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c51fbff9, max_idle_ns: 440795297444 ns [ 2.342945] clocksource: Switched to clocksource tsc [ 2.377962] random: crng init done [ 3.311790] mpt2sas_cm0: diag reset: SUCCESS [ 3.350703] mpt2sas_cm0: Allocated physical memory: size(1283 kB) [ 3.350905] mpt2sas_cm0: Current Controller Queue Depth(2552),Max Controller Queue Depth(2607) [ 3.351141] mpt2sas_cm0: Scatter Gather Elements per IO(128) [ 3.385301] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.385600] mpt2sas_cm0: log_info(0x30030100): originator(IOP), code(0x03), sub_code(0x0100) [ 3.385611] mpt2sas_cm0: LSISAS2008: FWVersion(07.15.08.00), ChipRevision(0x03), BiosVersion(07.11.10.00) [ 3.386102] mpt2sas_cm0: Protocol=( [ 3.386103] Initiator [ 3.386241] ,Target [ 3.386374] ), [ 3.386507] Capabilities=( [ 3.386653] Raid [ 3.386796] ,TLR [ 3.386975] ,EEDP [ 3.387109] ,Snapshot Buffer [ 3.387242] ,Diag Trace Buffer [ 3.387380] ,Task Set Full [ 3.387515] ,NCQ [ 3.387654] ) [ 3.388043] scsi host4: Fusion MPT SAS Host [ 3.397082] mpt2sas_cm0: sending port enable !! [ 4.985320] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5b083fe0e50a5600), phys(8) [ 11.112635] mpt2sas_cm0: port enable: SUCCESS [ 11.114827] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 11.115077] scsi 4:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221107000000), phy(7), device_name(0x039550002536ebe0) [ 11.115322] scsi 4:0:0:0: enclosure logical id (0x5b083fe0e50a5600), slot(0) [ 11.115603] scsi 4:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 11.116919] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 11.118175] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.210231] sd 4:0:0:0: [sda] Write Protect is off [ 11.210405] sd 4:0:0:0: [sda] Mode Sense: 7f 00 00 08 [ 11.210997] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.280031] sda: sda1 sda2 < sda5 > [ 11.353024] sd 4:0:0:0: [sda] Attached SCSI disk [ 12.068335] PM: Image not found (code -22) [ 12.453584] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.764314] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 14.234383] systemd-udevd[1522]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.576235] systemd-udevd[1532]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.576249] systemd-udevd[1535]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.580321] systemd-udevd[1540]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.580387] systemd-udevd[1539]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 14.636234] systemd-udevd[1540]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.636320] systemd-udevd[1532]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.636321] systemd-udevd[1535]: Process 'ifupdown-hotplug' failed with exit code 1. [ 14.636414] systemd-udevd[1539]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.670473] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 16.977590] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 17.038230] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.118513] Adding 1949692k swap on /dev/mapper/nocera0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 17.734284] systemd-udevd[1532]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.739581] xenbr0: port 1(eth0) entered blocking state [ 17.739759] xenbr0: port 1(eth0) entered disabled state [ 17.740012] device eth0 entered promiscuous mode [ 17.837869] bnx2 0000:02:00.0 eth0: using MSIX [ 17.846338] xenbr0: port 1(eth0) entered blocking state [ 17.846517] xenbr0: port 1(eth0) entered forwarding state [ 17.846712] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready