[ 0.000000] Linux version 4.19.0-26-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.304-1 (2024-01-09) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-26-amd64 root=/dev/mapper/godello1--vg-root ro console=ttyS0,115200n8 net.ifnames=0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009573efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000095fff000-0x0000000095ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.070 MHz processor [ 0.001295] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001296] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001301] last_pfn = 0x260000 max_arch_pfn = 0x400000000 [ 0.001304] MTRR default type: uncachable [ 0.001305] MTRR fixed ranges enabled: [ 0.001305] 00000-9FFFF write-back [ 0.001306] A0000-BFFFF uncachable [ 0.001306] C0000-E7FFF write-protect [ 0.001307] E8000-EFFFF write-combining [ 0.001307] F0000-FFFFF write-protect [ 0.001308] MTRR variable ranges enabled: [ 0.001309] 0 base 0000000000 mask 7F80000000 write-back [ 0.001310] 1 base 0080000000 mask 7FF0000000 write-back [ 0.001310] 2 base 0090000000 mask 7FFC000000 write-back [ 0.001311] 3 base 0094000000 mask 7FFE000000 write-back [ 0.001311] 4 base 00FF800000 mask 7FFF800000 write-protect [ 0.001312] 5 base 0100000000 mask 7F00000000 write-back [ 0.001312] 6 base 0200000000 mask 7F80000000 write-back [ 0.001313] 7 base 0260000000 mask 7FE0000000 uncachable [ 0.001313] 8 disabled [ 0.001314] 9 disabled [ 0.002434] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002849] last_pfn = 0x96000 max_arch_pfn = 0x400000000 [ 0.009287] found SMP MP-table at [mem 0x000fe1f0-0x000fe1ff] [ 0.009600] Using GB pages for direct mapping [ 0.009910] RAMDISK: [mem 0x34a0f000-0x364fefff] [ 0.009912] ACPI: Early table checksum verification disabled [ 0.010208] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.010211] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.010215] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.010219] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.010221] ACPI: FACS 0x0000000095FBD000 000040 [ 0.010223] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010225] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.010227] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.010229] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.010231] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010233] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010235] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010237] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.010239] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010241] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010243] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.010246] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.010248] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.010250] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.010252] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.010254] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010256] ACPI: DMAR 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010258] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.010260] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010262] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010264] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010266] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010268] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.010270] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.010271] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.010272] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.010272] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.010273] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.010274] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.010275] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.010276] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.010276] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.010277] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.010278] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.010279] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.010279] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.010280] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.010281] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.010282] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.010283] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.010283] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.010284] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.010285] ACPI: Reserving DMAR table memory at [mem 0x95fd3000-0x95fd307f] [ 0.010286] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.010287] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.010287] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.010288] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.010289] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.010290] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.010303] ACPI: Local APIC address 0xfee00000 [ 0.010372] No NUMA configuration found [ 0.010373] Faking a node at [mem 0x0000000000000000-0x000000025fffffff] [ 0.010376] NODE_DATA(0) allocated [mem 0x25fffb000-0x25fffffff] [ 0.010395] Zone ranges: [ 0.010396] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010397] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010398] Normal [mem 0x0000000100000000-0x000000025fffffff] [ 0.010399] Device empty [ 0.010400] Movable zone start for each node [ 0.010401] Early memory node ranges [ 0.010402] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.010403] node 0: [mem 0x0000000000100000-0x000000009573efff] [ 0.010403] node 0: [mem 0x0000000095fff000-0x0000000095ffffff] [ 0.010404] node 0: [mem 0x0000000100000000-0x000000025fffffff] [ 0.010532] Zeroed struct page in unavailable ranges: 10530 pages [ 0.010533] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fffffff] [ 0.010534] On node 0 totalpages: 2053854 [ 0.010535] DMA zone: 64 pages used for memmap [ 0.010536] DMA zone: 21 pages reserved [ 0.010536] DMA zone: 3998 pages, LIFO batch:0 [ 0.010607] DMA32 zone: 9501 pages used for memmap [ 0.010608] DMA32 zone: 608064 pages, LIFO batch:63 [ 0.022199] Normal zone: 22528 pages used for memmap [ 0.022200] Normal zone: 1441792 pages, LIFO batch:63 [ 0.046239] ACPI: PM-Timer IO Port: 0x1808 [ 0.046242] ACPI: Local APIC address 0xfee00000 [ 0.046247] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.046262] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.046263] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.046265] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.046266] ACPI: IRQ0 used by override. [ 0.046267] ACPI: IRQ9 used by override. [ 0.046268] Using ACPI (MADT) for SMP configuration information [ 0.046269] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.046272] ACPI: SPCR: SPCR table version 1 [ 0.046273] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.046276] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.046277] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.046292] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.046294] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.046294] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.046295] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.046296] PM: Registered nosave memory: [mem 0x9573f000-0x95bbefff] [ 0.046297] PM: Registered nosave memory: [mem 0x95bbf000-0x95fbefff] [ 0.046298] PM: Registered nosave memory: [mem 0x95fbf000-0x95ffefff] [ 0.046299] PM: Registered nosave memory: [mem 0x96000000-0x9fffffff] [ 0.046300] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff] [ 0.046300] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.046301] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff] [ 0.046302] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.046302] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.046303] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.046304] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.046304] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.046305] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.046306] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.046306] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.046307] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.046308] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.046308] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.046310] [mem 0xa0000000-0xefffffff] available for PCI devices [ 0.046311] Booting paravirtualized kernel on bare hardware [ 0.046313] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.126432] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.126689] percpu: Embedded 50 pages/cpu s165272 r8192 d31336 u262144 [ 0.126694] pcpu-alloc: s165272 r8192 d31336 u262144 alloc=1*2097152 [ 0.126695] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.126711] Built 1 zonelists, mobility grouping on. Total pages: 2021740 [ 0.126712] Policy zone: Normal [ 0.126713] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-26-amd64 root=/dev/mapper/godello1--vg-root ro console=ttyS0,115200n8 net.ifnames=0 [ 0.132186] Calgary: detecting Calgary via BIOS EBDA area [ 0.132460] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.159085] Memory: 7966396K/8215416K available (10252K kernel code, 1236K rwdata, 3192K rodata, 1624K init, 2212K bss, 249020K reserved, 0K cma-reserved) [ 0.159243] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.159248] Kernel/User page tables isolation: enabled [ 0.164777] ftrace: allocating 32081 entries in 126 pages [ 0.174836] ftrace: allocated 126 pages with 6 groups [ 0.174918] rcu: Hierarchical RCU implementation. [ 0.174919] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.174920] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.177100] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 [ 0.177294] random: crng init done [ 0.186285] Console: colour VGA+ 80x25 [ 1.352028] console [ttyS0] enabled [ 1.355928] ACPI: Core revision 20180810 [ 1.360506] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.370703] hpet clockevent registered [ 1.370706] APIC: Switch to symmetric I/O mode setup [ 1.376253] DMAR: Host address width 39 [ 1.380537] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 1.386471] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da [ 1.395311] DMAR: RMRR base: 0x00000095b46000 end: 0x00000095b65fff [ 1.402307] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 [ 1.409401] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 1.415427] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.425308] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.431330] x2apic enabled [ 1.434356] Switched APIC routing to cluster x2apic. [ 1.440319] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.466703] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c95b5070d4, max_idle_ns: 440795269580 ns [ 1.478453] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.14 BogoMIPS (lpj=12372280) [ 1.482469] CPU0: Thermal monitoring enabled (TM1) [ 1.486453] process: using mwait in idle threads [ 1.490447] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 1.494446] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 1.498446] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.502446] Spectre V2 : Mitigation: Retpolines [ 1.506446] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.510446] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.514446] Speculative Store Bypass: Vulnerable [ 1.518464] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 1.522446] TAA: Vulnerable: Clear CPU buffers attempted, no microcode [ 1.526446] MMIO Stale Data: Unknown: No mitigations [ 1.530446] SRBDS: Vulnerable: No microcode [ 1.534450] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.538446] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.542446] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.546446] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.550446] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.558736] Freeing SMP alternatives memory: 24K [ 1.563681] pid_max: default: 32768 minimum: 301 [ 1.566467] Security Framework initialized [ 1.570446] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.574457] AppArmor: AppArmor initialized [ 1.579076] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 1.582817] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.586467] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 1.590459] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 1.705717] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1220 v3 @ 3.10GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 1.706515] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.710449] ... version: 3 [ 1.714446] ... bit width: 48 [ 1.718446] ... generic registers: 8 [ 1.722446] ... value mask: 0000ffffffffffff [ 1.726446] ... max period: 00007fffffffffff [ 1.730446] ... fixed-purpose events: 3 [ 1.734446] ... event mask: 00000007000000ff [ 1.738476] rcu: Hierarchical SRCU implementation. [ 1.746799] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.750493] smp: Bringing up secondary CPUs ... [ 1.754500] x86: Booting SMP configuration: [ 1.758448] .... node #0, CPUs: #1 #2 #3 [ 1.759123] smp: Brought up 1 node, 4 CPUs [ 1.766447] smpboot: Max logical packages: 2 [ 1.770446] smpboot: Total of 4 processors activated (24744.56 BogoMIPS) [ 1.778655] devtmpfs: initialized [ 1.782488] x86/mm: Memory block size: 128MB [ 1.786963] PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 1.790521] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.794454] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.798482] pinctrl core: initialized pinctrl subsystem [ 1.802553] NET: Registered protocol family 16 [ 1.806500] audit: initializing netlink subsys (disabled) [ 1.810454] audit: type=2000 audit(1712863647.396:1): state=initialized audit_enabled=0 res=1 [ 1.818449] cpuidle: using governor ladder [ 1.822454] cpuidle: using governor menu [ 1.830481] Simple Boot Flag at 0x44 set to 0x1 [ 1.834459] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.842446] ACPI: bus type PCI registered [ 1.846447] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.854496] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 1.862454] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 1.870453] PCI: Using configuration type 1 for base access [ 1.878451] PCI: Dell System detected, enabling pci=bfsort. [ 1.882472] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.894462] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.898447] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.906478] ACPI: Added _OSI(Module Device) [ 1.914447] ACPI: Added _OSI(Processor Device) [ 1.918446] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.922446] ACPI: Added _OSI(Processor Aggregator Device) [ 1.930446] ACPI: Added _OSI(Linux-Dell-Video) [ 1.934446] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.947789] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 1.954814] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 1.959366] ACPI: Dynamic OEM Table Load: [ 1.962451] ACPI: SSDT 0xFFFF8E8496722800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 1.966745] ACPI: Dynamic OEM Table Load: [ 1.970450] ACPI: SSDT 0xFFFF8E8496716000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 1.974764] ACPI: Dynamic OEM Table Load: [ 1.978449] ACPI: SSDT 0xFFFF8E8497900C00 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 1.983166] ACPI: Interpreter enabled [ 1.986469] ACPI: (supports S0 S4 S5) [ 1.990449] ACPI: Using IOAPIC for interrupt routing [ 1.994481] HEST: Table parsing has been initialized. [ 1.998448] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.002653] ACPI: Enabled 11 GPEs in block 00 to 3F [ 2.024238] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 2.034939] ACPI: Power Resource [FN00] (off) [ 2.038510] ACPI: Power Resource [FN01] (off) [ 2.042506] ACPI: Power Resource [FN02] (off) [ 2.046505] ACPI: Power Resource [FN03] (off) [ 2.050503] ACPI: Power Resource [FN04] (off) [ 2.054973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 2.058449] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.062887] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.066446] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.070904] PCI host bridge to bus 0000:00 [ 2.074448] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.078446] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.082446] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.086446] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 2.090447] pci_bus 0000:00: root bus resource [bus 00-7e] [ 2.094452] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 2.094604] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 2.094623] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 2.094676] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 2.094798] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 2.094818] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 2.094892] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.095013] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 2.095084] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.095230] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 2.095300] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.095445] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 2.095465] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 2.095540] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.095654] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 2.095859] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 2.095874] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 2.095880] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 2.095887] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 2.095893] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 2.095899] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 2.095905] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 2.095936] pci 0000:00:1f.2: PME# supported from D3hot [ 2.096048] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 2.096064] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 2.096081] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 2.096322] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 2.096391] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 2.096424] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 2.096457] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 2.096478] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.096662] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.096838] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 2.096907] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 2.096940] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 2.096973] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 2.096994] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.097179] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 2.097387] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.098454] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 2.098833] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 2.102885] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.104099] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 2.106450] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 2.106455] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.111128] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 2.114521] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 2.115823] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 2.119428] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 2.122114] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 2.122632] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 2.122757] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.123971] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 2.129987] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 2.130658] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 2.130807] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.131872] pci_bus 0000:05: extended config space not accessible [ 2.134677] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 2.135162] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 2.135425] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 2.135683] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 2.141443] pci 0000:04:00.0: PCI bridge to [bus 05] [ 2.142663] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 2.142804] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.144258] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 2.144904] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 2.145167] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 2.147998] pci 0000:06:00.0: PME# supported from D3hot [ 2.148576] pci 0000:03:01.0: PCI bridge to [bus 06] [ 2.150664] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 2.156245] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.158486] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.162483] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.166473] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.170480] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.174479] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.178481] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.182478] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.186770] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 2.190445] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.190447] pci 0000:05:00.0: vgaarb: bridge control possible [ 2.194446] vgaarb: loaded [ 2.198474] pps_core: LinuxPPS API ver. 1 registered [ 2.202446] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.206447] PTP clock support registered [ 2.210450] EDAC MC: Ver: 3.0.0 [ 2.215111] PCI: Using ACPI for IRQ routing [ 2.223366] PCI: pci_cache_line_size set to 64 bytes [ 2.223918] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 2.223918] e820: reserve RAM buffer [mem 0x9573f000-0x97ffffff] [ 2.223919] e820: reserve RAM buffer [mem 0x96000000-0x97ffffff] [ 2.223985] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.226447] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.234456] clocksource: Switched to clocksource tsc-early [ 2.247395] VFS: Disk quotas dquot_6.6.0 [ 2.251785] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.259539] AppArmor: AppArmor Filesystem Enabled [ 2.264805] pnp: PnP ACPI init [ 2.268335] system 00:00: [io 0x0680-0x069f] has been reserved [ 2.274946] system 00:00: [io 0xffff] has been reserved [ 2.280872] system 00:00: [io 0xffff] has been reserved [ 2.286795] system 00:00: [io 0xffff] has been reserved [ 2.292719] system 00:00: [io 0x1800-0x18fe] has been reserved [ 2.299325] system 00:00: [io 0x164e-0x164f] has been reserved [ 2.305931] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.305970] system 00:01: [io 0x0800-0x087f] has been reserved [ 2.312583] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.312596] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.312627] system 00:03: [io 0x1854-0x1857] has been reserved [ 2.319240] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 2.319416] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.319528] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.319611] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.326997] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.334376] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.341754] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.349134] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 2.356514] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.363892] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 2.371658] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 2.379425] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.387192] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 2.394573] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 2.401954] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.402449] pnp: PnP ACPI: found 7 devices [ 2.412382] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.422291] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 2.429961] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 2.438020] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 2.446077] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.451618] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 2.459195] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 2.467838] pci 0000:04:00.0: PCI bridge to [bus 05] [ 2.473516] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 2.481181] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.490010] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 2.495981] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 2.503646] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.512466] pci 0000:03:01.0: PCI bridge to [bus 06] [ 2.518151] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 2.526071] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 2.532024] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 2.539680] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.548547] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 2.554377] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 2.561952] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.570596] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.570597] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.570598] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.570599] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 2.570599] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 2.570600] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 2.570601] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 2.570602] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.570603] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 2.570603] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.570604] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 2.570605] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.570606] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 2.570606] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 2.570607] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 2.570688] NET: Registered protocol family 2 [ 2.575652] IP idents hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.584162] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 2.592935] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.601102] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.608749] TCP: Hash tables configured (established 65536 bind 65536) [ 2.616056] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.622883] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.630216] NET: Registered protocol family 1 [ 2.635084] NET: Registered protocol family 44 [ 2.661530] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6d0 took 19675 usecs [ 2.673953] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.683346] PCI: CLS 64 bytes, default 64 [ 2.683372] Unpacking initramfs... [ 3.026322] Freeing initrd memory: 27584K [ 3.050468] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.057663] software IO TLB: mapped [mem 0x9173f000-0x9573f000] (64MB) [ 3.065455] Initialise system trusted keyrings [ 3.070427] Key type blacklist registered [ 3.074941] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 3.082948] zbud: loaded [ 3.207632] Key type asymmetric registered [ 3.212208] Asymmetric key parser 'x509' registered [ 3.217654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.225929] io scheduler noop registered [ 3.230310] io scheduler deadline registered [ 3.235097] io scheduler cfq registered (default) [ 3.240351] io scheduler mq-deadline registered [ 3.245985] pcieport 0000:00:1c.0: Signaling PME with IRQ 25 [ 3.252469] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 [ 3.264917] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.272411] intel_idle: MWAIT substates: 0x42120 [ 3.272412] intel_idle: v0.4.1 model 0x3C [ 3.272518] intel_idle: lapic_timer_reliable_states 0xffffffff [ 3.272697] ERST: Error Record Serialization Table (ERST) support is initialized. [ 3.281053] pstore: Registered erst as persistent store backend [ 3.287802] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 3.296119] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.323519] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.352114] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.360605] Linux agpgart interface v0.103 [ 3.365219] AMD IOMMUv2 driver by Joerg Roedel [ 3.371928] AMD IOMMUv2 functionality not available on this system [ 3.379058] i8042: PNP: No PS/2 controller found. [ 3.384361] mousedev: PS/2 mouse device common for all mice [ 3.390609] rtc_cmos 00:02: RTC can wake from S4 [ 3.395890] rtc_cmos 00:02: registered as rtc0 [ 3.400863] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 3.408937] intel_pstate: Intel P-state driver initializing [ 3.415414] ledtrig-cpu: registered to indicate activity on CPUs [ 3.423123] NET: Registered protocol family 10 [ 3.432969] Segment Routing with IPv6 [ 3.437073] mip6: Mobile IPv6 [ 3.440387] NET: Registered protocol family 17 [ 3.445509] mpls_gso: MPLS GSO support [ 3.449987] mce: Using 9 MCE banks [ 3.453824] microcode: sig=0x306c3, pf=0x2, revision=0x17 [ 3.459959] microcode: Microcode Update Driver: v2.2. [ 3.459971] sched_clock: Marking stable (2222800129, 1237156757)->(3764447835, -304490949) [ 3.475181] registered taskstats version 1 [ 3.479755] Loading compiled-in X.509 certificates [ 3.510143] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.519865] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 3.531235] zswap: loaded using pool lzo/zbud [ 3.536602] pstore: Using compression: deflate [ 3.541569] AppArmor: AppArmor sha1 policy hashing enabled [ 3.547864] rtc_cmos 00:02: setting system clock to 2024-04-11 19:27:31 UTC (1712863651) [ 3.710509] Freeing unused kernel image memory: 1624K [ 3.746565] Write protecting the kernel read-only data: 16384k [ 3.754061] Freeing unused kernel image memory: 2028K [ 3.759871] Freeing unused kernel image memory: 904K [ 3.770703] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.777893] x86/mm: Checking user space page tables [ 3.788406] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.795599] Run /init as init process [ 3.843905] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.850235] ACPI: Thermal Zone [TZ00] (28 C) [ 3.857694] cryptd: max_cpu_qlen set to 1000 [ 3.865487] ACPI: bus type USB registered [ 3.872566] usbcore: registered new interface driver usbfs [ 3.878704] usbcore: registered new interface driver hub [ 3.884681] usbcore: registered new device driver usb [ 3.884995] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180810/utaddress-213) [ 3.907604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.911957] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.922467] ACPI Warning: SystemIO range 0x00000000000008C0-0x00000000000008CF conflicts with OpRegion 0x0000000000000880-0x0000000000000C7F (\GPR) (20180810/utaddress-213) [ 3.925276] ACPI: Thermal Zone [TZ01] (30 C) [ 3.942449] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.958764] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x0000000000000880-0x00000000000008BF (\GPRL) (20180810/utaddress-213) [ 3.958834] SCSI subsystem initialized [ 3.976043] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x0000000000000880-0x0000000000000C7F (\GPR) (20180810/utaddress-213) [ 3.976045] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.976046] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x0000000000000880-0x00000000000008BF (\GPRL) (20180810/utaddress-213) [ 3.976057] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x0000000000000880-0x0000000000000C7F (\GPR) (20180810/utaddress-213) [ 3.976058] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.976059] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.061543] AVX2 version of gcm_enc/dec engaged. [ 4.066693] AES CTR mode by8 optimization enabled [ 4.066767] tsc: Refined TSC clocksource calibration: 3092.816 MHz [ 4.078842] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94c54ea4f, max_idle_ns: 440795261349 ns [ 4.079629] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.097326] clocksource: Switched to clocksource tsc [ 4.103096] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.112294] ehci-pci: EHCI PCI platform driver [ 4.112411] libata version 3.00 loaded. [ 4.113457] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.113461] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.114534] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 4.114538] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.122496] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 4.150796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.158878] usb usb1: Product: xHCI Host Controller [ 4.164318] usb usb1: Manufacturer: Linux 4.19.0-26-amd64 xhci-hcd [ 4.171213] usb usb1: SerialNumber: 0000:00:14.0 [ 4.176467] tg3.c:v3.137 (May 11, 2014) [ 4.176470] hub 1-0:1.0: USB hub found [ 4.185023] hub 1-0:1.0: 10 ports detected [ 4.191003] ahci 0000:00:1f.2: version 3.0 [ 4.191149] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 4.191328] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 4.191343] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.191345] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.191347] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 4.191382] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 4.191383] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.191384] usb usb2: Product: xHCI Host Controller [ 4.191384] usb usb2: Manufacturer: Linux 4.19.0-26-amd64 xhci-hcd [ 4.191385] usb usb2: SerialNumber: 0000:00:14.0 [ 4.191459] hub 2-0:1.0: USB hub found [ 4.191464] hub 2-0:1.0: 2 ports detected [ 4.198671] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 4.204468] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.210383] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 4.214584] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:88 [ 4.214585] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 4.214586] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 4.214586] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 4.218650] ehci-pci 0000:00:1a.0: debug port 2 [ 4.251386] scsi host0: ahci [ 4.259682] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 4.261002] scsi host1: ahci [ 4.262438] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:8a [ 4.262439] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 4.262440] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 4.262441] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 4.264905] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 4.269465] scsi host2: ahci [ 4.294524] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.296373] scsi host3: ahci [ 4.307887] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 4.319166] scsi host4: ahci [ 4.327626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.335407] scsi host5: ahci [ 4.340168] usb usb3: Product: EHCI Host Controller [ 4.340169] usb usb3: Manufacturer: Linux 4.19.0-26-amd64 ehci_hcd [ 4.340170] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.340276] hub 3-0:1.0: USB hub found [ 4.343481] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 31 [ 4.346634] hub 3-0:1.0: 2 ports detected [ 4.358383] ata2: DUMMY [ 4.369561] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.378120] ata3: DUMMY [ 4.378120] ata4: DUMMY [ 4.378122] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 31 [ 4.385659] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 4.391940] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 31 [ 4.395221] ehci-pci 0000:00:1d.0: debug port 2 [ 4.454477] usb 1-9: new high-speed USB device number 2 using xhci_hcd [ 4.462419] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.514074] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 4.619591] usb 1-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 4.628771] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.636740] usb 1-9: Product: Gadget USB HUB [ 4.641511] usb 1-9: Manufacturer: no manufacturer [ 4.642472] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 4.646878] usb 1-9: SerialNumber: 0123456789 [ 4.659506] hub 1-9:1.0: USB hub found [ 4.662505] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.670142] hub 1-9:1.0: 6 ports detected [ 4.670151] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 4.683857] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.691919] usb usb4: Product: EHCI Host Controller [ 4.697364] usb usb4: Manufacturer: Linux 4.19.0-26-amd64 ehci_hcd [ 4.704255] usb usb4: SerialNumber: 0000:00:1d.0 [ 4.709590] hub 4-0:1.0: USB hub found [ 4.713780] hub 4-0:1.0: 2 ports detected [ 4.717869] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.789160] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 4.796459] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.805484] ata1.00: configured for UDMA/100 [ 4.810384] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 4.822827] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 4.831970] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.840232] hub 3-1:1.0: USB hub found [ 4.844588] hub 3-1:1.0: 4 ports detected [ 4.970531] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 5.034531] usb 1-9.1: new high-speed USB device number 3 using xhci_hcd [ 5.131347] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 5.134152] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.140496] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.140729] hub 4-1:1.0: USB hub found [ 5.150077] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 5.155585] hub 4-1:1.0: 6 ports detected [ 5.162423] ata5.00: configured for UDMA/100 [ 5.167281] usb 1-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 5.174680] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 5.176272] usb 1-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 5.202788] usb 1-9.1: Product: Keyboard/Mouse Function [ 5.208620] usb 1-9.1: Manufacturer: Avocent [ 5.213386] usb 1-9.1: SerialNumber: 20120917 [ 5.229369] hidraw: raw HID events driver (C) Jiri Kosina [ 5.538326] ata6: SATA link down (SStatus 0 SControl 300) [ 5.549782] usbcore: registered new interface driver usbhid [ 5.556012] usbhid: USB HID core driver [ 5.560575] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.569314] sd 0:0:0:0: [sda] Write Protect is off [ 5.574701] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.574712] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.585017] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:0624:0249.0001/input/input0 [ 5.638071] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.647710] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.653755] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 5.658680] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 5.673543] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:0624:0249.0002/input/input1 [ 5.688204] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 5.702743] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.2/0003:0624:0249.0003/input/input2 [ 5.717391] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 5.772424] sda: sda1 sda2 < sda5 > [ 5.776787] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.059422] device-mapper: uevent: version 1.0.3 [ 6.064660] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 6.368407] PM: Image not found (code -22) [ 6.760862] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 6.997516] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 8.405487] systemd-udevd[445]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 8.641840] systemd-udevd[484]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 8.658803] systemd-udevd[484]: Process 'ifupdown-hotplug' failed with exit code 1. [ 8.689907] systemd-udevd[497]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 1. [ 8.778034] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED) [ 8.789131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 8.797462] ACPI: Power Button [PWRF] [ 8.801747] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.812216] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 8.821076] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 8.827493] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.833824] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 8.833857] iTCO_vendor_support: vendor-support=0 [ 8.839862] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 8.922032] systemd-udevd[473]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 8.922043] systemd-udevd[497]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 8.934584] systemd-udevd[473]: Process 'ifupdown-hotplug' failed with exit code 1. [ 8.954481] systemd-udevd[497]: Process 'ifupdown-hotplug' failed with exit code 1. [ 8.963534] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 8.971305] acpi INT33D6:00: intel-vbtn: created platform device [ 8.979577] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.985546] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 8.985596] version 39.2 [ 8.994841] ACPI Error: No handler for Region [ECF2] (0000000097a703d3) [EmbeddedControl] (20180810/evregion-132) [ 9.006314] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180810/exfldio-265) [ 9.015643] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.H_EC.ECWT, AE_NOT_EXIST (20180810/psparse-516) [ 9.015674] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.027308] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.H_EC.VGBI.VBDL, AE_NOT_EXIST (20180810/psparse-516) [ 9.027312] intel-vbtn INT33D6:00: failed to read Intel Virtual Button driver [ 9.033583] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 9.062334] ipmi device interface [ 9.065027] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.098923] ppdev: user-space parallel port driver [ 9.141651] IPMI System Interface driver. [ 9.146164] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.153280] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0 [ 9.159927] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.166472] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.173146] ipmi_si IPI0001:00: [io 0x0ca8] regsize 1 spacing 4 irq 0 [ 9.180459] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.190180] ipmi_si: Adding ACPI-specified kcs state machine [ 9.196544] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ 9.325118] [TTM] Zone kernel: Available graphics memory: 3999280 kiB [ 9.332432] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 9.339735] [TTM] Initializing pool allocator [ 9.344605] [TTM] Initializing DMA pool allocator [ 9.376730] fbcon: mgadrmfb (fb0) is primary device [ 9.377524] systemd-udevd[473]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 1. [ 9.475799] Console: switching to colour frame buffer device 128x48 [ 9.516310] mgag200 0000:05:00.0: fb0: mgadrmfb frame buffer device [ 9.542516] [drm] Initialized mgag200 1.0.0 20110418 for 0000:05:00.0 on minor 0 [ 9.571375] intel_rapl: Found RAPL domain package [ 9.576681] intel_rapl: Found RAPL domain core [ 9.581656] intel_rapl: Found RAPL domain dram [ 9.585453] ipmi_si IPI0001:00: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ 9.586646] intel_rapl: RAPL package 0 domain package locked by BIOS [ 9.665188] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.697172] IPMI SSIF Interface driver [ 10.811599] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 11.848378] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.874596] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.906387] Adding 1949692k swap on /dev/mapper/godello1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 12.224424] audit: type=1400 audit(1712863660.215:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1061 comm="apparmor_parser" [ 12.241662] audit: type=1400 audit(1712863660.215:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1061 comm="apparmor_parser" [ 12.259427] audit: type=1400 audit(1712863660.231:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1059 comm="apparmor_parser" [ 12.276312] audit: type=1400 audit(1712863660.231:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1059 comm="apparmor_parser" [ 12.293024] audit: type=1400 audit(1712863660.231:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1059 comm="apparmor_parser" [ 12.310273] audit: type=1400 audit(1712863660.239:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1060 comm="apparmor_parser" [ 12.977311] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.401060] tg3 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 16.408458] tg3 0000:01:00.0 eth0: Flow control is off for TX and off for RX [ 16.416333] tg3 0000:01:00.0 eth0: EEE is disabled [ 16.421770] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready