[ 0.000000] Linux version 6.1.84+ (osstest@himrod2) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Thu Apr 11 18:36:04 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 3092.838 MHz processor [ 0.000765] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000767] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000772] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000773] Disabled [ 0.000774] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000777] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000805] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021124] RAMDISK: [mem 0x04000000-0x053d3fff] [ 0.021128] ACPI: Early table checksum verification disabled [ 0.021933] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.021941] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.021971] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.022008] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022020] ACPI: FACS 0x0000000095FBD000 000040 [ 0.022031] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022043] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022055] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.022066] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.022078] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022089] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022101] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022112] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.022124] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022135] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022147] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.022158] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.022170] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.022181] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.022193] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.022204] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022216] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022227] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.022239] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022250] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022262] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022274] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022285] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022291] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.022293] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.022293] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.022294] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.022295] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.022295] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.022296] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.022297] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.022298] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.022298] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.022299] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.022300] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.022300] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.022301] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.022302] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.022302] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.022303] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.022304] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.022304] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.022305] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.022306] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.022307] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.022307] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.022308] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.022309] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.022309] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.022352] Setting APIC routing to Xen PV. [ 0.025188] Zone ranges: [ 0.025188] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.025190] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.025192] Normal empty [ 0.025192] Movable zone start for each node [ 0.025193] Early memory node ranges [ 0.025193] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.025194] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.025196] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.025200] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.025234] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.026895] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.026897] p2m virtual area at (____ptrval____), size is 40000000 [ 0.117040] Remapped 97 page(s) [ 0.117504] ACPI: PM-Timer IO Port: 0x1808 [ 0.117539] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.117568] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.117576] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.117579] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.117596] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.117599] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.117606] ACPI: SPCR: SPCR table version 1 [ 0.117608] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.117656] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.117668] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.117670] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.117672] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.117675] Booting kernel on Xen [ 0.117676] Xen version: 4.16.6 (preserve-AD) [ 0.117678] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.122006] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.122262] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.122267] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.122269] pcpu-alloc: [0] 0 1 2 3 [ 0.122309] xen: PV spinlocks enabled [ 0.122312] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.122315] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.122317] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.122403] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.122427] random: crng init done [ 0.122465] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.122488] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.123005] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.123007] software IO TLB: area num 4. [ 0.172599] Memory: 390476K/524284K available (14349K kernel code, 2682K rwdata, 4628K rodata, 1592K init, 1308K bss, 133556K reserved, 0K cma-reserved) [ 0.172720] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.174621] Dynamic Preempt: voluntary [ 0.174680] rcu: Preemptible hierarchical RCU implementation. [ 0.174681] rcu: RCU event tracing is enabled. [ 0.174682] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.174683] Trampoline variant of Tasks RCU enabled. [ 0.174684] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.174685] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.182211] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.182295] xen:events: Using FIFO-based ABI [ 0.182312] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.182318] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.182322] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.182327] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.182332] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.182338] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.182343] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.182348] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.182353] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.182357] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.182362] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.182367] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.182371] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.182376] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.182381] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.182389] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.192180] Console: colour VGA+ 80x25 [ 0.211003] printk: console [tty0] enabled [ 0.212003] printk: console [hvc0] enabled [ 0.212165] ACPI: Core revision 20220331 [ 0.222970] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.223161] Xen: using vcpuop timer interface [ 0.223167] installing Xen timer for CPU 0 [ 0.223334] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.223524] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092838) [ 0.223833] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.223974] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.224123] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.224296] Spectre V2 : Mitigation: Retpolines [ 0.224530] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.224702] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.224840] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.224985] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.225158] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.225298] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.225528] MDS: Mitigation: Clear CPU buffers [ 0.225669] MMIO Stale Data: Unknown: No mitigations [ 0.225808] SRBDS: Unknown: Dependent on hypervisor status [ 0.225960] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.226129] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.226265] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.226414] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.226526] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.238954] Freeing SMP alternatives memory: 40K [ 0.239097] pid_max: default: 32768 minimum: 301 [ 0.239242] LSM: Security Framework initializing [ 0.239378] SELinux: Initializing. [ 0.239540] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.239711] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.240593] cpu 0 spinlock event irq 25 [ 0.240738] VPMU disabled by hypervisor. [ 0.241107] cblist_init_generic: Setting adjustable number of callback queues. [ 0.241276] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.241444] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.241528] signal: max sigframe size: 1776 [ 0.241706] rcu: Hierarchical SRCU implementation. [ 0.241839] rcu: Max phase no-delay instances is 400. [ 0.242202] smp: Bringing up secondary CPUs ... [ 0.242488] installing Xen timer for CPU 1 [ 0.242795] cpu 1 spinlock event irq 35 [ 0.243094] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.243875] installing Xen timer for CPU 2 [ 0.244263] cpu 2 spinlock event irq 41 [ 0.244624] installing Xen timer for CPU 3 [ 0.245058] cpu 3 spinlock event irq 47 [ 0.245058] smp: Brought up 1 node, 4 CPUs [ 0.245058] smpboot: Max logical packages: 1 [ 0.245598] devtmpfs: initialized [ 0.245702] x86/mm: Memory block size: 128MB [ 0.246007] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.246564] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.246749] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.247000] PM: RTC time: 21:23:13, date: 2024-04-11 [ 0.247217] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247376] xen:grant_table: Grant tables using version 1 layout [ 0.247530] Grant table initialized [ 0.247782] audit: initializing netlink subsys (disabled) [ 0.247939] audit: type=2000 audit(1712870593.820:1): state=initialized audit_enabled=0 res=1 [ 0.247939] thermal_sys: Registered thermal governor 'step_wise' [ 0.247939] thermal_sys: Registered thermal governor 'user_space' [ 0.247939] Simple Boot Flag at 0x44 set to 0x1 [ 0.248682] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.248949] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.249133] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.287755] PCI: Using configuration type 1 for base access [ 0.287949] PCI: Dell System detected, enabling pci=bfsort. [ 0.290023] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.290568] ACPI: Added _OSI(Module Device) [ 0.290700] ACPI: Added _OSI(Processor Device) [ 0.290835] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.290835] ACPI: Added _OSI(Processor Aggregator Device) [ 0.301618] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.302385] xen: registering gsi 9 triggering 0 polarity 0 [ 0.302865] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.306717] ACPI: Dynamic OEM Table Load: [ 0.306856] ACPI: SSDT 0xFFFF888003D30000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.307757] ACPI: Dynamic OEM Table Load: [ 0.307906] ACPI: SSDT 0xFFFF888003C91800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.308710] ACPI: Dynamic OEM Table Load: [ 0.308848] ACPI: SSDT 0xFFFF888003650600 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.310129] ACPI: Interpreter enabled [ 0.310283] ACPI: PM: (supports S0 S4 S5) [ 0.310418] ACPI: Using IOAPIC for interrupt routing [ 0.310551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.310725] PCI: Using E820 reservations for host bridge windows [ 0.311122] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.316987] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.324685] ACPI: PM: Power Resource [FN00] [ 0.324860] ACPI: PM: Power Resource [FN01] [ 0.325024] ACPI: PM: Power Resource [FN02] [ 0.325197] ACPI: PM: Power Resource [FN03] [ 0.325365] ACPI: PM: Power Resource [FN04] [ 0.326182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.326334] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.327313] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.327454] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.328001] PCI host bridge to bus 0000:00 [ 0.328137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.328280] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.328427] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.328526] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.328696] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.328876] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.329388] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.329604] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.330004] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.330365] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.330562] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.330994] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.331314] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.331789] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.332010] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.332151] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.332638] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.333122] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.333331] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.333470] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.333883] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.334073] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.334523] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.334835] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.335468] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.335583] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.335748] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.335914] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.336081] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.336248] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.336418] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.336688] pci 0000:00:1f.2: PME# supported from D3hot [ 0.336977] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.337192] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.337430] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.337947] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.338242] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.338522] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.338799] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.339060] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.339668] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.340346] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.340680] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.340961] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.341247] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.341502] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.342981] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.343723] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.343894] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.344588] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.347624] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.349168] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.349325] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.349491] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.350821] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.354253] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.356012] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.359674] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.363135] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.363463] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.364661] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.366162] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.370900] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.371250] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.371601] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.372820] pci_bus 0000:05: extended config space not accessible [ 0.373193] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.373790] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.386791] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.387186] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.388644] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.392055] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.392404] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.392673] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.394480] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.395034] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.395439] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.397827] pci 0000:06:00.0: PME# supported from D3hot [ 0.398681] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.399075] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.400360] pci_bus 0000:00: on NUMA node 0 [ 0.400562] xen: registering gsi 13 triggering 1 polarity 0 [ 0.401565] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.401779] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.401989] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.402202] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.402408] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.402526] ACPI: PCI: Interrupt link LNKE disabled [ 0.402729] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.402866] ACPI: PCI: Interrupt link LNKF disabled [ 0.403065] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.403199] ACPI: PCI: Interrupt link LNKG disabled [ 0.403412] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.405100] xen:balloon: Initialising balloon driver [ 0.405577] iommu: Default domain type: Translated [ 0.405712] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.405712] SCSI subsystem initialized [ 0.405717] libata version 3.00 loaded. [ 0.405717] ACPI: bus type USB registered [ 0.405717] usbcore: registered new interface driver usbfs [ 0.405843] usbcore: registered new interface driver hub [ 0.405985] usbcore: registered new device driver usb [ 0.406135] pps_core: LinuxPPS API ver. 1 registered [ 0.406530] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406716] PTP clock support registered [ 0.407554] Advanced Linux Sound Architecture Driver Initialized. [ 0.407779] NetLabel: Initializing [ 0.407909] NetLabel: domain hash size = 128 [ 0.408047] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.408047] NetLabel: unlabeled traffic allowed by default [ 0.408047] PCI: Using ACPI for IRQ routing [ 0.423654] PCI: pci_cache_line_size set to 64 bytes [ 0.424292] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.424294] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.424683] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.424827] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.424978] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.424978] vgaarb: loaded [ 0.426526] clocksource: Switched to clocksource tsc-early [ 0.426580] VFS: Disk quotas dquot_6.6.0 [ 0.426580] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.426580] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.426580] pnp: PnP ACPI init [ 0.427442] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.427591] system 00:00: [io 0xffff] has been reserved [ 0.427802] system 00:00: [io 0xffff] has been reserved [ 0.427939] system 00:00: [io 0xffff] has been reserved [ 0.428080] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.428220] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.428413] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.428572] xen: registering gsi 8 triggering 1 polarity 0 [ 0.428641] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.429077] xen: registering gsi 3 triggering 1 polarity 0 [ 0.429342] xen: registering gsi 4 triggering 1 polarity 0 [ 0.429344] Already setup the GSI :4 [ 0.429661] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.429809] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.429949] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.430089] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.430225] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.430362] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.430504] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.430651] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.430797] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.430939] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.431083] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.432075] pnp: PnP ACPI: found 7 devices [ 0.448071] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.448270] NET: Registered PF_INET protocol family [ 0.448437] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.448766] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.448945] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.449116] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.449289] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.449477] TCP: Hash tables configured (established 4096 bind 4096) [ 0.449658] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.449827] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.449994] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.450310] RPC: Registered named UNIX socket transport module. [ 0.450460] RPC: Registered udp transport module. [ 0.450600] RPC: Registered tcp transport module. [ 0.450741] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.451067] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.451254] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.451402] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.451580] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.451749] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.451898] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.452051] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.452246] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.452539] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.452777] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.453148] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.453423] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.453670] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.454035] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.454312] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.454823] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.455087] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.455314] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.455734] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.455881] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.456036] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.456312] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.456446] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.456588] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.456732] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.456871] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.457012] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.457185] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.457326] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.457486] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.457633] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.457802] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.457949] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.458117] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.458255] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.458432] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.458707] xen: registering gsi 16 triggering 0 polarity 1 [ 0.458727] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.460178] xen: registering gsi 16 triggering 0 polarity 1 [ 0.460182] Already setup the GSI :16 [ 0.471645] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x5f0 took 11244 usecs [ 0.471889] xen: registering gsi 23 triggering 0 polarity 1 [ 0.471902] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.484649] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x5f0 took 12509 usecs [ 0.485133] PCI: CLS 64 bytes, default 64 [ 0.485275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.485317] Unpacking initramfs... [ 0.485419] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.485847] kvm: no hardware support for 'kvm_intel' [ 0.485988] has_svm: not amd or hygon [ 0.486126] kvm: no hardware support for 'kvm_amd' [ 0.486267] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.486493] clocksource: Switched to clocksource tsc [ 0.493494] Initialise system trusted keyrings [ 0.493699] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.494829] NFS: Registering the id_resolver key type [ 0.494971] Key type id_resolver registered [ 0.495102] Key type id_legacy registered [ 0.495291] 9p: Installing v9fs 9p2000 file system support [ 0.505378] Key type asymmetric registered [ 0.505514] Asymmetric key parser 'x509' registered [ 0.505657] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.505830] io scheduler mq-deadline registered [ 0.505967] io scheduler kyber registered [ 0.506454] xen: registering gsi 16 triggering 0 polarity 1 [ 0.506458] Already setup the GSI :16 [ 0.506796] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.507164] xen: registering gsi 18 triggering 0 polarity 1 [ 0.507179] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.507355] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.511714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.512035] ACPI: button: Power Button [PWRF] [ 0.512570] Monitor-Mwait will be used to enter C-1 state [ 0.512665] Monitor-Mwait will be used to enter C-2 state [ 0.512678] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.512985] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.525956] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.526289] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.526778] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.526924] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.527291] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.527458] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.527822] xen:xen_evtchn: Event-channel device installed [ 0.528013] xen_pciback: backend is vpci [ 0.528545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.528781] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.529395] hpet_acpi_add: no address or irqs in _CRS [ 0.529584] Non-volatile memory driver v1.3 [ 0.529715] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.531175] loop: module loaded [ 0.534645] ahci 0000:00:1f.2: version 3.0 [ 0.534713] xen: registering gsi 19 triggering 0 polarity 1 [ 0.534730] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.534890] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.535073] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.535266] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.541619] scsi host0: ahci [ 0.541989] scsi host1: ahci [ 0.542299] scsi host2: ahci [ 0.542585] scsi host3: ahci [ 0.542840] scsi host4: ahci [ 0.543092] scsi host5: ahci [ 0.543260] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.543434] ata2: DUMMY [ 0.543557] ata3: DUMMY [ 0.543683] ata4: DUMMY [ 0.543813] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.543989] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.544329] tun: Universal TUN/TAP device driver, 1.6 [ 0.544621] xen: registering gsi 16 triggering 0 polarity 1 [ 0.544625] Already setup the GSI :16 [ 0.577801] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.577986] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.578177] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.578350] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.578895] xen: registering gsi 17 triggering 0 polarity 1 [ 0.578917] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.626592] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.626778] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.626956] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.627152] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.627600] e100: Intel(R) PRO/100 Network Driver [ 0.627734] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.627891] sky2: driver version 1.30 [ 0.628056] xen_netfront: Initialising Xen virtual ethernet driver [ 0.628400] xen: registering gsi 16 triggering 0 polarity 1 [ 0.628406] Already setup the GSI :16 [ 0.628605] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.628804] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.629013] ehci-pci 0000:00:1a.0: debug port 2 [ 0.633165] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.640193] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.640436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.640610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.640787] usb usb1: Product: EHCI Host Controller [ 0.640935] usb usb1: Manufacturer: Linux 6.1.84+ ehci_hcd [ 0.641078] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.641546] Freeing initrd memory: 20304K [ 0.641559] hub 1-0:1.0: USB hub found [ 0.641829] hub 1-0:1.0: 2 ports detected [ 0.642234] xen: registering gsi 23 triggering 0 polarity 1 [ 0.642240] Already setup the GSI :23 [ 0.642431] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.642639] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.642846] ehci-pci 0000:00:1d.0: debug port 2 [ 0.646991] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.653192] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.653445] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.653617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.653788] usb usb2: Product: EHCI Host Controller [ 0.653924] usb usb2: Manufacturer: Linux 6.1.84+ ehci_hcd [ 0.654067] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.654375] hub 2-0:1.0: USB hub found [ 0.654546] hub 2-0:1.0: 2 ports detected [ 0.654936] xen: registering gsi 16 triggering 0 polarity 1 [ 0.654941] Already setup the GSI :16 [ 0.655160] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.655404] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.656696] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.657137] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.657361] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.657542] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.657744] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.657923] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.658090] usb usb3: Product: xHCI Host Controller [ 0.658240] usb usb3: Manufacturer: Linux 6.1.84+ xhci-hcd [ 0.658379] usb usb3: SerialNumber: 0000:00:14.0 [ 0.658677] hub 3-0:1.0: USB hub found [ 0.658833] hub 3-0:1.0: 10 ports detected [ 0.662103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.662287] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.662460] usb usb4: Product: xHCI Host Controller [ 0.662595] usb usb4: Manufacturer: Linux 6.1.84+ xhci-hcd [ 0.662744] usb usb4: SerialNumber: 0000:00:14.0 [ 0.663040] hub 4-0:1.0: USB hub found [ 0.663211] hub 4-0:1.0: 2 ports detected [ 0.663741] usbcore: registered new interface driver usblp [ 0.663895] usbcore: registered new interface driver usb-storage [ 0.664058] i8042: PNP: No PS/2 controller found. [ 0.664298] rtc_cmos 00:02: RTC can wake from S4 [ 0.664905] rtc_cmos 00:02: registered as rtc0 [ 0.665088] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.665283] device-mapper: uevent: version 1.0.3 [ 0.665349] xen: registering gsi 18 triggering 0 polarity 1 [ 0.665421] Already setup the GSI :18 [ 0.665486] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.665675] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.665723] intel_pstate: CPU model not supported [ 0.666008] hid: raw HID events driver (C) Jiri Kosina [ 0.666249] usbcore: registered new interface driver usbhid [ 0.666391] usbhid: USB HID core driver [ 0.666796] Initializing XFRM netlink socket [ 0.667008] NET: Registered PF_INET6 protocol family [ 0.667503] Segment Routing with IPv6 [ 0.667646] In-situ OAM (IOAM) with IPv6 [ 0.667808] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.668036] NET: Registered PF_PACKET protocol family [ 0.668221] 9pnet: Installing 9P2000 support [ 0.668375] Key type dns_resolver registered [ 0.668774] IPI shorthand broadcast: enabled [ 0.668928] sched_clock: Marking stable (627576720, 41132446)->(673258929, -4549763) [ 0.669358] registered taskstats version 1 [ 0.669503] Loading compiled-in X.509 certificates [ 0.670621] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.671131] PM: Magic number: 4:864:398 [ 0.671342] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.671342] printk: console [netcon0] enabled [ 0.671626] netconsole: network logging started [ 0.671945] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.678861] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.679207] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.679378] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 0.679562] cfg80211: failed to load regulatory.db [ 0.679710] ALSA device list: [ 0.679846] No soundcards found. [ 0.854365] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.882194] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.898184] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 0.898332] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.935023] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 0.935743] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.937057] ata1.00: configured for UDMA/100 [ 0.937385] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 0.938185] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.938236] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.938508] sd 0:0:0:0: [sda] Write Protect is off [ 0.938641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.938660] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.938868] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.959703] sda: sda1 sda2 < sda5 > [ 0.960175] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.010958] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.022915] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.023453] hub 1-1:1.0: USB hub found [ 1.023847] hub 1-1:1.0: 4 ports detected [ 1.036052] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.036241] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.036377] usb 3-9: Product: Gadget USB HUB [ 1.036501] usb 3-9: Manufacturer: no manufacturer [ 1.036627] usb 3-9: SerialNumber: 0123456789 [ 1.037231] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.037393] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.037813] hub 3-9:1.0: USB hub found [ 1.037975] hub 2-1:1.0: USB hub found [ 1.038115] hub 3-9:1.0: 6 ports detected [ 1.038270] hub 2-1:1.0: 6 ports detected [ 1.246447] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.249239] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.254045] ata5.00: configured for UDMA/100 [ 1.259176] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.299739] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.299923] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.323591] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.323680] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.330191] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.417307] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.417494] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.417670] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.417809] usb 3-9.1: Manufacturer: Avocent [ 1.417945] usb 3-9.1: SerialNumber: 20120917 [ 1.424860] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.476406] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.477572] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.477939] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.479117] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.479484] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.630446] ata6: SATA link down (SStatus 0 SControl 300) [ 1.631366] Freeing unused kernel image (initmem) memory: 1592K [ 1.631511] Write protecting the kernel read-only data: 22528k [ 1.644225] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.645107] Freeing unused kernel image (rodata/data gap) memory: 1516K [ 1.841759] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.841906] Run /init as init process [ 1.842038] with arguments: [ 1.842039] /init [ 1.842040] placeholder [ 1.842041] with environment: [ 1.842041] HOME=/ [ 1.842042] TERM=linux [ 2.487493] process '/usr/bin/fstype' started with executable stack [ 2.715485] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.719885] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 4.017319] systemd-udevd[317]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 4.365389] systemd-udevd[335]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.365609] systemd-udevd[327]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.370442] systemd-udevd[335]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.370649] systemd-udevd[327]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.372752] systemd-udevd[331]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.372911] systemd-udevd[327]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.382252] systemd-udevd[331]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.387595] systemd-udevd[327]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.412851] systemd-udevd[335]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 1. [ 6.333699] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.340443] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.351345] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.458333] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.437719] xenbr0: port 1(eth0) entered blocking state [ 8.437898] xenbr0: port 1(eth0) entered disabled state [ 8.438067] device eth0 entered promiscuous mode