[ 0.000000] Linux version 6.1.84+ (osstest@himrod2) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Thu Apr 11 18:36:04 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.050032] tsc: Fast TSC calibration using PIT [ 0.050032] tsc: Detected 3092.682 MHz processor [ 0.050034] tsc: Detected 3092.838 MHz TSC [ 0.050339] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.050342] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.050347] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.050348] Disabled [ 0.050349] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.050352] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.050380] Kernel/User page tables isolation: disabled on XEN PV. [ 0.070693] RAMDISK: [mem 0x04000000-0x053d3fff] [ 0.070697] ACPI: Early table checksum verification disabled [ 0.071503] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.071511] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.071541] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.071579] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.071590] ACPI: FACS 0x0000000095FBD000 000040 [ 0.071602] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071613] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.071625] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.071636] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.071648] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071659] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071671] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071682] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.071694] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071706] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071717] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.071729] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.071740] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.071752] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.071763] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.071774] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071786] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071798] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.071809] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071821] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071832] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071844] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071855] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.071861] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.071863] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.071863] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.071864] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.071865] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.071865] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.071866] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.071867] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.071868] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.071868] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.071869] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.071870] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.071870] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.071871] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.071872] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.071872] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.071873] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.071874] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.071874] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.071875] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.071876] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.071877] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.071877] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.071878] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.071879] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.071879] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.071920] Setting APIC routing to Xen PV. [ 0.074756] Zone ranges: [ 0.074757] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.074759] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.074760] Normal empty [ 0.074761] Movable zone start for each node [ 0.074762] Early memory node ranges [ 0.074762] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.074763] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.074764] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.074769] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.074803] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.076463] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.076465] p2m virtual area at (____ptrval____), size is 40000000 [ 0.166550] Remapped 97 page(s) [ 0.167054] ACPI: PM-Timer IO Port: 0x1808 [ 0.167090] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.167119] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.167127] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.167130] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.167147] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.167150] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.167157] ACPI: SPCR: SPCR table version 1 [ 0.167159] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.167207] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.167220] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.167222] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.167223] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.167226] Booting kernel on Xen [ 0.167227] Xen version: 4.16.6 (preserve-AD) [ 0.167229] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.171556] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.171810] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.171816] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.171818] pcpu-alloc: [0] 0 1 2 3 [ 0.171859] xen: PV spinlocks enabled [ 0.171861] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.171864] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.171866] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro net.ifnames=0 console=hvc0 net.ifnames=0 [ 0.171952] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.171976] random: crng init done [ 0.172014] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.172037] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.172556] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.172558] software IO TLB: area num 4. [ 0.222139] Memory: 390476K/524284K available (14349K kernel code, 2682K rwdata, 4628K rodata, 1592K init, 1308K bss, 133556K reserved, 0K cma-reserved) [ 0.222257] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.224153] Dynamic Preempt: voluntary [ 0.224212] rcu: Preemptible hierarchical RCU implementation. [ 0.224212] rcu: RCU event tracing is enabled. [ 0.224213] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.224214] Trampoline variant of Tasks RCU enabled. [ 0.224215] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.224216] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.231741] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.231824] xen:events: Using FIFO-based ABI [ 0.231842] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.231848] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.231852] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.231857] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.231862] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.231868] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.231873] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.231877] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.231882] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.231887] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.231892] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.231897] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.231901] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.231906] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.231910] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.231918] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.241821] Console: colour VGA+ 80x25 [ 0.260787] printk: console [tty0] enabled [ 0.261795] printk: console [hvc0] enabled [ 0.261960] ACPI: Core revision 20220331 [ 0.272768] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.272963] Xen: using vcpuop timer interface [ 0.272970] installing Xen timer for CPU 0 [ 0.273139] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.273324] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092838) [ 0.273640] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.273784] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.273933] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.274101] Spectre V2 : Mitigation: Retpolines [ 0.274329] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.274498] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.274638] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.274780] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.274948] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.275327] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.275505] MDS: Mitigation: Clear CPU buffers [ 0.275640] MMIO Stale Data: Unknown: No mitigations [ 0.275779] SRBDS: Unknown: Dependent on hypervisor status [ 0.275938] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.276104] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.276245] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.276326] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.276488] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.288925] Freeing SMP alternatives memory: 40K [ 0.289072] pid_max: default: 32768 minimum: 301 [ 0.289219] LSM: Security Framework initializing [ 0.289330] SELinux: Initializing. [ 0.289490] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.289659] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.290390] cpu 0 spinlock event irq 25 [ 0.290526] VPMU disabled by hypervisor. [ 0.290889] cblist_init_generic: Setting adjustable number of callback queues. [ 0.291056] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.291220] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.291327] signal: max sigframe size: 1776 [ 0.291501] rcu: Hierarchical SRCU implementation. [ 0.291640] rcu: Max phase no-delay instances is 400. [ 0.292014] smp: Bringing up secondary CPUs ... [ 0.292298] installing Xen timer for CPU 1 [ 0.292593] cpu 1 spinlock event irq 35 [ 0.293327] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.293684] installing Xen timer for CPU 2 [ 0.294063] cpu 2 spinlock event irq 41 [ 0.294429] installing Xen timer for CPU 3 [ 0.294853] cpu 3 spinlock event irq 47 [ 0.294853] smp: Brought up 1 node, 4 CPUs [ 0.294853] smpboot: Max logical packages: 1 [ 0.295396] devtmpfs: initialized [ 0.295497] x86/mm: Memory block size: 128MB [ 0.295802] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.296362] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.296540] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.296778] PM: RTC time: 20:29:40, date: 2024-04-11 [ 0.296984] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.297142] xen:grant_table: Grant tables using version 1 layout [ 0.297290] Grant table initialized [ 0.297452] audit: initializing netlink subsys (disabled) [ 0.297610] audit: type=2000 audit(1712867381.672:1): state=initialized audit_enabled=0 res=1 [ 0.297610] thermal_sys: Registered thermal governor 'step_wise' [ 0.297610] thermal_sys: Registered thermal governor 'user_space' [ 0.297610] Simple Boot Flag at 0x44 set to 0x1 [ 0.298345] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.298623] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.298804] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.337445] PCI: Using configuration type 1 for base access [ 0.337647] PCI: Dell System detected, enabling pci=bfsort. [ 0.339713] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.340363] ACPI: Added _OSI(Module Device) [ 0.340512] ACPI: Added _OSI(Processor Device) [ 0.340646] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.340793] ACPI: Added _OSI(Processor Aggregator Device) [ 0.350991] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.351765] xen: registering gsi 9 triggering 0 polarity 0 [ 0.352252] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.355760] ACPI: Dynamic OEM Table Load: [ 0.355905] ACPI: SSDT 0xFFFF888003C68400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.356833] ACPI: Dynamic OEM Table Load: [ 0.356971] ACPI: SSDT 0xFFFF888003C99800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.357779] ACPI: Dynamic OEM Table Load: [ 0.357918] ACPI: SSDT 0xFFFF888003655400 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.359196] ACPI: Interpreter enabled [ 0.359344] ACPI: PM: (supports S0 S4 S5) [ 0.359475] ACPI: Using IOAPIC for interrupt routing [ 0.359632] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.359810] PCI: Using E820 reservations for host bridge windows [ 0.360198] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.366023] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.373725] ACPI: PM: Power Resource [FN00] [ 0.373908] ACPI: PM: Power Resource [FN01] [ 0.374077] ACPI: PM: Power Resource [FN02] [ 0.374247] ACPI: PM: Power Resource [FN03] [ 0.374361] ACPI: PM: Power Resource [FN04] [ 0.375179] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.375329] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.376309] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.376326] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.376969] PCI host bridge to bus 0000:00 [ 0.377101] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.377243] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.377326] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.377499] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.377663] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.377838] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.378372] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.378602] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.379018] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.379390] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.379591] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.380044] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.380359] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.380827] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.381032] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.381174] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.381657] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.382157] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.382369] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.382520] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.383015] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.383207] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.383640] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.383946] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.384595] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.384797] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.384958] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.385126] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.385295] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.385366] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.385531] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.385853] pci 0000:00:1f.2: PME# supported from D3hot [ 0.386129] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.386334] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.386568] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.387125] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.387465] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.387745] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.388025] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.388289] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.388742] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.389465] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.389768] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.390046] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.390325] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.390587] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.391168] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.392007] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.392191] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.392857] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.396904] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.398476] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.398628] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.398791] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.400259] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.403659] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.405477] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.409095] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.412763] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.413099] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.413360] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.414856] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.419441] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.419793] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.420085] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.421322] pci_bus 0000:05: extended config space not accessible [ 0.434566] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.435189] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.435597] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.435996] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.437478] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.440925] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.441286] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.441472] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.443227] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.443822] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.444240] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.446597] pci 0000:06:00.0: PME# supported from D3hot [ 0.447480] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.447838] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.449123] pci_bus 0000:00: on NUMA node 0 [ 0.449321] xen: registering gsi 13 triggering 1 polarity 0 [ 0.450303] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.450397] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.450607] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.450813] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.451017] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.451164] ACPI: PCI: Interrupt link LNKE disabled [ 0.451373] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.451512] ACPI: PCI: Interrupt link LNKF disabled [ 0.451717] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.451854] ACPI: PCI: Interrupt link LNKG disabled [ 0.452060] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.453766] xen:balloon: Initialising balloon driver [ 0.454381] iommu: Default domain type: Translated [ 0.454516] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.454516] SCSI subsystem initialized [ 0.455342] libata version 3.00 loaded. [ 0.455350] ACPI: bus type USB registered [ 0.455494] usbcore: registered new interface driver usbfs [ 0.455643] usbcore: registered new interface driver hub [ 0.455785] usbcore: registered new device driver usb [ 0.455930] pps_core: LinuxPPS API ver. 1 registered [ 0.456068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.456344] PTP clock support registered [ 0.456520] Advanced Linux Sound Architecture Driver Initialized. [ 0.456586] NetLabel: Initializing [ 0.456716] NetLabel: domain hash size = 128 [ 0.456847] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.456993] NetLabel: unlabeled traffic allowed by default [ 0.457348] PCI: Using ACPI for IRQ routing [ 0.472352] PCI: pci_cache_line_size set to 64 bytes [ 0.472979] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.472981] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.473480] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.473617] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.473753] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.474326] vgaarb: loaded [ 0.475628] clocksource: Switched to clocksource tsc-early [ 0.475813] VFS: Disk quotas dquot_6.6.0 [ 0.475952] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.476114] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.476294] pnp: PnP ACPI init [ 0.476294] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.476399] system 00:00: [io 0xffff] has been reserved [ 0.476540] system 00:00: [io 0xffff] has been reserved [ 0.476679] system 00:00: [io 0xffff] has been reserved [ 0.476815] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.476957] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.477138] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.477138] xen: registering gsi 8 triggering 1 polarity 0 [ 0.477383] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.477814] xen: registering gsi 3 triggering 1 polarity 0 [ 0.478089] xen: registering gsi 4 triggering 1 polarity 0 [ 0.478091] Already setup the GSI :4 [ 0.478406] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.478550] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.478687] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.478839] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.478981] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.479129] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.479283] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.479435] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.479574] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.479718] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.479861] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.480867] pnp: PnP ACPI: found 7 devices [ 0.496816] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.497005] NET: Registered PF_INET protocol family [ 0.497175] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.497513] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.497681] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.497879] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.498050] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.498240] TCP: Hash tables configured (established 4096 bind 4096) [ 0.498415] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.498574] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.498738] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.499048] RPC: Registered named UNIX socket transport module. [ 0.499193] RPC: Registered udp transport module. [ 0.499338] RPC: Registered tcp transport module. [ 0.499477] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.499814] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.499995] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.500137] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.500301] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.500486] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.500634] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.500786] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.500975] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.501265] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.501509] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.501877] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.502162] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.502404] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.502870] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.503154] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.503650] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.503925] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.504159] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.504599] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.504748] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.504898] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.505079] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.505220] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.505362] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.505503] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.505654] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.505795] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.505964] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.506104] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.506271] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.506417] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.506588] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.506726] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.506894] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.507037] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.507218] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.507490] xen: registering gsi 16 triggering 0 polarity 1 [ 0.507508] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.508945] xen: registering gsi 16 triggering 0 polarity 1 [ 0.508949] Already setup the GSI :16 [ 0.521433] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x5f0 took 12238 usecs [ 0.521674] xen: registering gsi 23 triggering 0 polarity 1 [ 0.521687] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.534443] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x5f0 took 12517 usecs [ 0.534927] PCI: CLS 64 bytes, default 64 [ 0.535067] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.535114] Unpacking initramfs... [ 0.535207] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.535621] kvm: no hardware support for 'kvm_intel' [ 0.535759] has_svm: not amd or hygon [ 0.535892] kvm: no hardware support for 'kvm_amd' [ 0.536030] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.536262] clocksource: Switched to clocksource tsc [ 0.542632] Initialise system trusted keyrings [ 0.542834] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.543978] NFS: Registering the id_resolver key type [ 0.544124] Key type id_resolver registered [ 0.544262] Key type id_legacy registered [ 0.544448] 9p: Installing v9fs 9p2000 file system support [ 0.554325] Key type asymmetric registered [ 0.554477] Asymmetric key parser 'x509' registered [ 0.554617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.554797] io scheduler mq-deadline registered [ 0.554933] io scheduler kyber registered [ 0.555393] xen: registering gsi 16 triggering 0 polarity 1 [ 0.555398] Already setup the GSI :16 [ 0.555719] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.556096] xen: registering gsi 18 triggering 0 polarity 1 [ 0.556110] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.556292] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.560695] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.560935] ACPI: button: Power Button [PWRF] [ 0.573789] Monitor-Mwait will be used to enter C-1 state [ 0.573813] Monitor-Mwait will be used to enter C-2 state [ 0.573830] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.574146] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.574452] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.574794] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.575310] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.575476] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.575826] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.575967] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.576291] xen:xen_evtchn: Event-channel device installed [ 0.576490] xen_pciback: backend is vpci [ 0.576986] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.577229] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.577847] hpet_acpi_add: no address or irqs in _CRS [ 0.578036] Non-volatile memory driver v1.3 [ 0.578168] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.579757] loop: module loaded [ 0.583204] ahci 0000:00:1f.2: version 3.0 [ 0.583269] xen: registering gsi 19 triggering 0 polarity 1 [ 0.583284] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.583451] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.583619] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.583795] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.589841] scsi host0: ahci [ 0.590173] scsi host1: ahci [ 0.590439] scsi host2: ahci [ 0.590696] scsi host3: ahci [ 0.590963] scsi host4: ahci [ 0.591225] scsi host5: ahci [ 0.591390] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.591568] ata2: DUMMY [ 0.591694] ata3: DUMMY [ 0.591816] ata4: DUMMY [ 0.591944] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.592114] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.592457] tun: Universal TUN/TAP device driver, 1.6 [ 0.592737] xen: registering gsi 16 triggering 0 polarity 1 [ 0.592742] Already setup the GSI :16 [ 0.626307] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.626500] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.626679] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.626853] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.627374] xen: registering gsi 17 triggering 0 polarity 1 [ 0.627391] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.675628] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.675816] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.675996] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.676168] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.676612] e100: Intel(R) PRO/100 Network Driver [ 0.676744] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.676917] sky2: driver version 1.30 [ 0.677074] xen_netfront: Initialising Xen virtual ethernet driver [ 0.677364] xen: registering gsi 16 triggering 0 polarity 1 [ 0.677368] Already setup the GSI :16 [ 0.677568] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.677768] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.677962] ehci-pci 0000:00:1a.0: debug port 2 [ 0.682096] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.684877] Freeing initrd memory: 20304K [ 0.688461] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.688659] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.688825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.688989] usb usb1: Product: EHCI Host Controller [ 0.689126] usb usb1: Manufacturer: Linux 6.1.84+ ehci_hcd [ 0.689261] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.689565] hub 1-0:1.0: USB hub found [ 0.689711] hub 1-0:1.0: 2 ports detected [ 0.690071] xen: registering gsi 23 triggering 0 polarity 1 [ 0.690077] Already setup the GSI :23 [ 0.690256] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.690454] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.690655] ehci-pci 0000:00:1d.0: debug port 2 [ 0.694781] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.701458] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.701669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.701838] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.702002] usb usb2: Product: EHCI Host Controller [ 0.702141] usb usb2: Manufacturer: Linux 6.1.84+ ehci_hcd [ 0.702284] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.702603] hub 2-0:1.0: USB hub found [ 0.702749] hub 2-0:1.0: 2 ports detected [ 0.703131] xen: registering gsi 16 triggering 0 polarity 1 [ 0.703135] Already setup the GSI :16 [ 0.703350] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.703603] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.704860] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.705306] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.705541] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.705710] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.705920] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.706089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.706261] usb usb3: Product: xHCI Host Controller [ 0.706420] usb usb3: Manufacturer: Linux 6.1.84+ xhci-hcd [ 0.706558] usb usb3: SerialNumber: 0000:00:14.0 [ 0.706844] hub 3-0:1.0: USB hub found [ 0.706998] hub 3-0:1.0: 10 ports detected [ 0.710226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.710418] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.710591] usb usb4: Product: xHCI Host Controller [ 0.710731] usb usb4: Manufacturer: Linux 6.1.84+ xhci-hcd [ 0.710866] usb usb4: SerialNumber: 0000:00:14.0 [ 0.711128] hub 4-0:1.0: USB hub found [ 0.711275] hub 4-0:1.0: 2 ports detected [ 0.711869] usbcore: registered new interface driver usblp [ 0.712024] usbcore: registered new interface driver usb-storage [ 0.712184] i8042: PNP: No PS/2 controller found. [ 0.712450] rtc_cmos 00:02: RTC can wake from S4 [ 0.713061] rtc_cmos 00:02: registered as rtc0 [ 0.713234] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.713428] device-mapper: uevent: version 1.0.3 [ 0.713493] xen: registering gsi 18 triggering 0 polarity 1 [ 0.713567] Already setup the GSI :18 [ 0.713641] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.713840] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.713879] intel_pstate: CPU model not supported [ 0.714176] hid: raw HID events driver (C) Jiri Kosina [ 0.714425] usbcore: registered new interface driver usbhid [ 0.714562] usbhid: USB HID core driver [ 0.714950] Initializing XFRM netlink socket [ 0.715159] NET: Registered PF_INET6 protocol family [ 0.715626] Segment Routing with IPv6 [ 0.715765] In-situ OAM (IOAM) with IPv6 [ 0.715919] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.716150] NET: Registered PF_PACKET protocol family [ 0.716324] 9pnet: Installing 9P2000 support [ 0.716480] Key type dns_resolver registered [ 0.716846] IPI shorthand broadcast: enabled [ 0.717001] sched_clock: Marking stable (675389369, 41402174)->(721589702, -4798159) [ 0.717422] registered taskstats version 1 [ 0.717557] Loading compiled-in X.509 certificates [ 0.718605] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.719154] PM: Magic number: 4:861:497 [ 0.719280] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.719472] printk: console [netcon0] enabled [ 0.719627] netconsole: network logging started [ 0.719956] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.726911] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.727252] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.727431] ALSA device list: [ 0.727431] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 0.727433] cfg80211: failed to load regulatory.db [ 0.727440] No soundcards found. [ 0.903424] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.931462] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.939462] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.947463] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 0.970228] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 0.970979] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.972163] ata1.00: configured for UDMA/100 [ 0.972445] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 0.973216] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.973328] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.973577] sd 0:0:0:0: [sda] Write Protect is off [ 0.973717] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.973801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.974099] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.060183] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.072189] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.072757] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.072929] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.073170] hub 1-1:1.0: USB hub found [ 1.073338] hub 2-1:1.0: USB hub found [ 1.073486] hub 1-1:1.0: 4 ports detected [ 1.073610] hub 2-1:1.0: 6 ports detected [ 1.084186] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.084360] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.084506] usb 3-9: Product: Gadget USB HUB [ 1.084628] usb 3-9: Manufacturer: no manufacturer [ 1.084754] usb 3-9: SerialNumber: 0123456789 [ 1.085676] hub 3-9:1.0: USB hub found [ 1.085904] hub 3-9:1.0: 6 ports detected [ 1.161125] sda: sda1 sda2 < sda5 > [ 1.161599] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.279403] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.282221] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.286974] ata5.00: configured for UDMA/100 [ 1.292136] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.331949] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.332128] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.350854] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.350958] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.379466] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.466334] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.466523] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.466700] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.466837] usb 3-9.1: Manufacturer: Avocent [ 1.466968] usb 3-9.1: SerialNumber: 20120917 [ 1.473876] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.525678] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.526686] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.527050] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.527955] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.528319] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.655400] ata6: SATA link down (SStatus 0 SControl 300) [ 1.656308] Freeing unused kernel image (initmem) memory: 1592K [ 1.656473] Write protecting the kernel read-only data: 22528k [ 1.669257] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.670148] Freeing unused kernel image (rodata/data gap) memory: 1516K [ 1.865912] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.866060] Run /init as init process [ 1.866194] with arguments: [ 1.866195] /init [ 1.866195] placeholder [ 1.866196] with environment: [ 1.866197] HOME=/ [ 1.866198] TERM=linux [ 2.539633] process '/usr/bin/fstype' started with executable stack [ 2.766836] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.771204] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 4.004732] systemd-udevd[316]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 4.339800] systemd-udevd[326]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.339807] systemd-udevd[328]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.353125] systemd-udevd[335]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.354536] systemd-udevd[329]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 4.366455] systemd-udevd[326]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.368446] systemd-udevd[328]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.369945] systemd-udevd[335]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.371249] systemd-udevd[329]: Process 'ifupdown-hotplug' failed with exit code 1. [ 4.410081] systemd-udevd[326]: Process '/etc/console-setup/cached_setup_font.sh' failed with exit code 1. [ 6.343454] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.439210] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.443734] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.559743] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.129177] xenbr0: port 1(eth0) entered blocking state [ 8.129355] xenbr0: port 1(eth0) entered disabled state [ 8.129541] device eth0 entered promiscuous mode