[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.84+ (osstest@pinot0) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Thu Apr 11 20:37:23 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Xen 4.16 support found [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 [ 0.000000] pcpu-alloc: s35412 r8192 d21932 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 console=hvc0 net.ifnames=0 clk_ignore_unused clk_ignore_unused [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 418284K/524288K available (13312K kernel code, 2179K rwdata, 5632K rodata, 2048K init, 435K bss, 40468K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000012] Switching to timer-based delay loop, resolution 41ns [ 0.000508] Console: colour dummy device 80x30 [ 0.293413] printk: console [hvc0] enabled [ 0.297604] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.308005] CPU: Testing write buffer coherency: ok [ 0.312948] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.322517] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.328914] pid_max: default: 32768 minimum: 301 [ 0.333712] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.340982] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.349390] /cpus/cpu@0 missing clock-frequency property [ 0.354185] /cpus/cpu@1 missing clock-frequency property [ 0.359580] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.366102] xen:grant_table: Grant tables using version 1 layout [ 0.371421] Grant table initialized [ 0.374963] xen:events: Using FIFO-based ABI [ 0.379283] Xen: initializing cpu0 [ 0.382808] Setting up static identity map for 0x60300000 - 0x603000ac [ 0.390600] rcu: Hierarchical SRCU implementation. [ 0.394203] rcu: Max phase no-delay instances is 1000. [ 0.402401] EFI services will not be available. [ 0.405707] smp: Bringing up secondary CPUs ... [ 0.480645] Xen: initializing cpu1 [ 0.480781] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.480802] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.499660] smp: Brought up 1 node, 2 CPUs [ 0.503452] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.509758] CPU: All CPU(s) started in SVC mode. [ 0.515113] devtmpfs: initialized [ 0.527477] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.533959] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.543683] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.551855] pinctrl core: initialized pinctrl subsystem [ 0.558288] DMI not present or invalid. [ 0.561390] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.568754] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.577511] thermal_sys: Registered thermal governor 'step_wise' [ 0.577829] software IO TLB: area num 2. [ 0.586503] software IO TLB: only able to allocate 8 MB [ 0.593624] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) [ 0.598801] No ATAGs? [ 0.601127] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 0.609664] Serial: AMBA PL011 UART driver [ 0.631787] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 [ 0.681172] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 [ 0.705292] xen:balloon: Initialising balloon driver [ 0.712957] iommu: Default domain type: Translated [ 0.716459] iommu: DMA domain TLB invalidation policy: strict mode [ 0.723413] SCSI subsystem initialized [ 0.726772] libata version 3.00 loaded. [ 0.726962] usbcore: registered new interface driver usbfs [ 0.732224] usbcore: registered new interface driver hub [ 0.737598] usbcore: registered new device driver usb [ 0.744263] s3c-i2c 12c60000.i2c: slave address 0x66 [ 0.747870] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz [ 0.754168] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 [ 0.762621] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 [ 0.771772] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter [ 0.777268] s3c-i2c 12c90000.i2c: slave address 0x00 [ 0.781980] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz [ 0.788208] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter [ 0.793438] s3c-i2c 12ce0000.i2c: slave address 0x00 [ 0.798215] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz [ 0.804321] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter [ 0.809505] s3c-i2c 121d0000.i2c: slave address 0x00 [ 0.814425] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz [ 0.820458] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter [ 0.826251] pps_core: LinuxPPS API ver. 1 registered [ 0.830667] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.839867] PTP clock support registered [ 0.844052] EDAC MC: Ver: 3.0.0 [ 0.849359] vgaarb: loaded [ 0.851802] clocksource: Switched to clocksource arch_sys_counter [ 0.863839] NET: Registered PF_INET protocol family [ 0.867484] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.875462] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.883087] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.890873] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.898717] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.905995] TCP: Hash tables configured (established 4096 bind 4096) [ 0.912366] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.918918] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.926052] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.939080] RPC: Registered named UNIX socket transport module. [ 0.943639] RPC: Registered udp transport module. [ 0.948397] RPC: Registered tcp transport module. [ 0.953187] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.959698] PCI: CLS 0 bytes, default 64 [ 0.965214] Initialise system trusted keyrings [ 0.968671] Trying to unpack rootfs image as initramfs... [ 1.007570] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.017848] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.037573] NFS: Registering the id_resolver key type [ 1.041310] Key type id_resolver registered [ 1.045535] Key type id_legacy registered [ 1.049668] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.056390] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.103133] Key type asymmetric registered [ 1.105855] Asymmetric key parser 'x509' registered [ 1.110952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.118295] io scheduler mq-deadline registered [ 1.122890] io scheduler kyber registered [ 1.171725] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc [ 1.283307] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.289507] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.313465] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.319662] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.358216] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.364442] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.392748] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.398974] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.413387] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected [ 1.423843] xen:xen_evtchn: Event-channel device installed [ 1.473407] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.482378] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 [ 1.490435] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 [ 1.499472] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 [ 1.508838] SuperH (H)SCI(F) driver initialized [ 1.513711] STMicroelectronics ASC driver initialized [ 1.519029] STM32 USART driver initialized [ 1.523745] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 1.537765] brd: module loaded [ 1.543865] loop: module loaded [ 1.559473] Invalid max_queues (4), will use default max: 2. [ 1.583532] Freeing initrd memory: 11368K [ 1.588278] tun: Universal TUN/TAP device driver, 1.6 [ 1.592183] CAN device driver interface [ 1.597284] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.607919] xen_netfront: Initialising Xen virtual ethernet driver [ 1.612816] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.618392] usbcore: registered new interface driver pegasus [ 1.624134] usbcore: registered new interface driver asix [ 1.629586] usbcore: registered new interface driver ax88179_178a [ 1.635758] usbcore: registered new interface driver cdc_ether [ 1.641662] usbcore: registered new interface driver smsc75xx [ 1.647486] usbcore: registered new interface driver smsc95xx [ 1.653298] usbcore: registered new interface driver net1080 [ 1.659015] usbcore: registered new interface driver cdc_subset [ 1.665008] usbcore: registered new interface driver zaurus [ 1.670664] usbcore: registered new interface driver cdc_ncm [ 1.680009] usbcore: registered new interface driver usb-storage [ 1.714019] s5m-rtc s5m-rtc: registered as rtc0 [ 1.722771] s5m-rtc s5m-rtc: setting system clock to 2024-04-12T07:09:14 UTC (1712905754) [ 1.731325] i2c_dev: i2c /dev entries driver [ 1.741617] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff [ 1.751301] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 [ 1.762610] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found [ 1.773448] device-mapper: uevent: version 1.0.3 [ 1.776919] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.785897] cpu cpu0: OPP table can't be empty [ 1.790903] failed to register cpuidle driver [ 1.794158] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver [ 1.802478] sdhci: Secure Digital Host Controller Interface driver [ 1.807500] sdhci: Copyright(c) Pierre Ossman [ 1.815592] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.824064] ledtrig-cpu: registered to indicate activity on CPUs [ 1.830131] usbcore: registered new interface driver usbhid [ 1.834364] usbhid: USB HID core driver [ 1.845283] NET: Registered PF_INET6 protocol family [ 1.849869] Segment Routing with IPv6 [ 1.852698] In-situ OAM (IOAM) with IPv6 [ 1.856669] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.863128] NET: Registered PF_PACKET protocol family [ 1.867737] can: controller area network core [ 1.872236] NET: Registered PF_CAN protocol family [ 1.876998] can: raw protocol [ 1.880037] can: broadcast manager protocol [ 1.884313] can: netlink gateway - max_hops=1 [ 1.889010] Key type dns_resolver registered [ 1.910470] ThumbEE CPU extension supported. [ 1.913428] Registering SWP/SWPB emulation handler [ 1.918710] Loading compiled-in X.509 certificates [ 1.947087] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.953163] clk: Not disabling unused clocks [ 1.959793] Freeing unused kernel image (initmem) memory: 2048K [ 1.965874] Run /init as init process [ 1.968149] with arguments: [ 1.968156] /init [ 1.968161] with environment: [ 1.968166] HOME=/ [ 1.968171] TERM=linux [ 3.122815] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator [ 3.129902] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator [ 3.140016] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator [ 3.151399] phy phy-12130000.phy.8: phy_power_on was called before phy_init [ 3.157056] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.162579] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 3.200767] exynos-ehci 12110000.usb: irq 125, io mem 0x12110000 [ 3.205736] Synopsys Designware Multimedia Card Interface Driver [ 3.216830] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator [ 3.223030] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator [ 3.230540] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator [ 3.238745] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 3.258802] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 3.264943] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 3.275451] s2mps11-clk s5m8767-clk: DMA mask not set [ 3.281069] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 3.286177] dwmmc_exynos 12200000.mmc: Version ID is 241a [ 3.291677] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo [ 3.301476] mmc_host mmc0: card is polling. [ 3.308981] hub 1-0:1.0: USB hub found [ 3.311487] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 3.318394] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 3.325216] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 127,32 bit host data width,128 deep fifo [ 3.339007] hub 1-0:1.0: 3 ports detected [ 3.346061] phy phy-12130000.phy.8: phy_power_on was called before phy_init [ 3.346633] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled [ 3.351678] exynos-ohci 12120000.usb: USB Host Controller [ 3.358849] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.364278] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 3.373196] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.382520] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.404058] exynos-ohci 12120000.usb: irq 125, io mem 0x12120000 [ 3.433388] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.451407] scsi host0: ahci-dwc [ 3.453575] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 [ 3.487101] hub 2-0:1.0: USB hub found [ 3.490463] hub 2-0:1.0: 3 ports detected [ 3.509609] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.521218] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 3.525614] rtc rtc1: invalid alarm value: 1900-01-30T00:00:00 [ 3.531576] mmc1: new high speed SDHC card at address aaaa [ 3.535348] s3c-rtc 101e0000.rtc: registered as rtc1 [ 3.547357] mmcblk1: mmc1:aaaa SU04G 3.69 GiB [ 3.596029] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.612191] mmc0: new DDR MMC card at address 0001 [ 3.622139] mmcblk0: mmc0:0001 M4G1FB 3.64 GiB [ 3.627659] mmcblk0: p1 p2 p3 p4 [ 3.643307] mmcblk0boot0: mmc0:0001 M4G1FB 1.00 MiB [ 3.649042] mmcblk0boot1: mmc0:0001 M4G1FB 1.00 MiB [ 3.662513] mmcblk0rpmb: mmc0:0001 M4G1FB 128 KiB, chardev (238:0) [ 3.961858] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.967582] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 3.973533] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 3.982469] ata1.00: configured for UDMA/133 [ 3.985750] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 3.997393] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.003538] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.009806] sd 0:0:0:0: [sda] Write Protect is off [ 4.013708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.016126] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.024982] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 4.070427] sda: sda1 sda2 < sda5 > [ 4.073230] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.082815] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) [ 4.103076] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host [ 4.109993] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.115289] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 4.168602] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 [ 4.177352] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 [ 4.182941] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.188277] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 4.196025] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 4.214855] hub 3-0:1.0: USB hub found [ 4.217545] hub 3-0:1.0: 1 port detected [ 4.231495] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.239029] hub 4-0:1.0: USB hub found [ 4.242289] hub 4-0:1.0: 1 port detected [ 9.831792] random: crng init done [ 10.635768] process '/usr/bin/fstype' started with executable stack [ 10.953786] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 11.196563] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 13.274757] systemd-udevd[303]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 14.680058] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 14.701211] wm8994 3-001a: Device is not a WM8994, ID is 0 [ 14.708443] mc: Linux media interface: v0.10 [ 14.708511] wm8994: probe of 3-001a failed with error -22 [ 14.719232] s5p-secss 10830000.sss: s5p-sss driver registered [ 14.795521] videodev: Linux video capture interface: v2.00 [ 14.930491] s5p-mfc 11000000.codec: Adding to iommu group 0 [ 14.939635] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers [ 14.992330] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 15.004571] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 15.011949] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 15.027672] s5p-mfc 11000000.codec: decoder registered as /dev/video0 [ 15.037589] s5p-mfc 11000000.codec: encoder registered as /dev/video1 [ 15.198173] exynos-gsc 13e00000.gsc: Adding to iommu group 1 [ 15.223463] exynos-gsc 13e10000.gsc: Adding to iommu group 2 [ 15.231002] exynos-gsc 13e20000.gsc: Adding to iommu group 3 [ 15.239997] exynos-gsc 13e30000.gsc: Adding to iommu group 4 [ 15.341887] usb3503 usb-hub: switched to HUB mode [ 15.345236] usb3503 usb-hub: usb3503_probe: probed in hub mode [ 15.483253] systemd-udevd[321]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 15.483456] systemd-udevd[316]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 15.603241] systemd-udevd[316]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.639537] systemd-udevd[321]: Process 'ifupdown-hotplug' failed with exit code 1. [ 15.653088] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 15.712227] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 15.912857] hub 1-3:1.0: USB hub found [ 15.915414] hub 1-3:1.0: 3 ports detected [ 16.045589] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.053275] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.061964] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.079874] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.087589] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.096315] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.241824] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci [ 16.394456] hub 1-3.2:1.0: USB hub found [ 16.397311] hub 1-3.2:1.0: 4 ports detected [ 16.414842] usbcore: registered new device driver onboard-usb-hub [ 16.532618] hub 1-3.2:1.0: USB hub found [ 16.535599] hub 1-3.2:1.0: 4 ports detected [ 16.546334] hub 1-3.2:1.0: USB hub found [ 16.549943] hub 1-3.2:1.0: 4 ports detected [ 16.871847] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci [ 17.025186] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random [ 17.168214] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. [ 17.713825] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 17.728197] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) [ 17.738127] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, 2a:e5:63:6e:27:bf [ 17.798305] systemd-udevd[321]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.809302] systemd-udevd[321]: Could not generate persistent MAC address for eth0: No such file or directory [ 18.086079] systemd-udevd[321]: Process 'ifupdown-hotplug' failed with exit code 1. [ 20.033590] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 20.085498] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. [ 20.237460] Adding 1949692k swap on /dev/mapper/arndale--lakeside--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 21.043365] systemd-udevd[321]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 21.053237] systemd-udevd[321]: Could not generate persistent MAC address for xenbr0: No such file or directory [ 21.063158] xenbr0: port 1(eth0) entered blocking state [ 21.068316] xenbr0: port 1(eth0) entered disabled state [ 21.073836] device eth0 entered promiscuous mode [ 21.084919] systemd-udevd[321]: Process 'ifupdown-hotplug' failed with exit code 1. [ 21.085200] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode