[ 0.000000] Linux version 6.1.87+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Apr 22 03:12:16 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2199.996 MHz processor [ 0.000899] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000903] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000911] Disabled [ 0.000912] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000916] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000955] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027640] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027648] ACPI: Early table checksum verification disabled [ 0.028249] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028261] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028298] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028346] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028362] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028378] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028393] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028409] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028425] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028441] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028457] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028473] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028489] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028505] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028522] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028538] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028554] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028570] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028586] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028602] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028618] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028633] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028646] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028648] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028649] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028650] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028651] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028652] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028653] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028654] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028655] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028655] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028656] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028657] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028658] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028659] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028660] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028661] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028662] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028663] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028664] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028665] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028710] Setting APIC routing to Xen PV. [ 0.032646] Zone ranges: [ 0.032647] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032649] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032651] Normal empty [ 0.032652] Movable zone start for each node [ 0.032653] Early memory node ranges [ 0.032653] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032655] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032657] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032662] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032699] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034243] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034248] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221725] Remapped 102 page(s) [ 0.223079] ACPI: PM-Timer IO Port: 0x408 [ 0.223132] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223135] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223136] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223138] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223139] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223141] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223142] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223144] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223171] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223185] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223188] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223214] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223219] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223289] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223304] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223306] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223307] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223309] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223314] Booting kernel on Xen [ 0.223315] Xen version: 4.19-unstable (preserve-AD) [ 0.223317] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229550] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229832] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229839] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229842] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229923] xen: PV spinlocks enabled [ 0.229926] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229932] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.229934] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.229970] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.229994] random: crng init done [ 0.230043] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230068] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231387] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231389] software IO TLB: area num 8. [ 0.290791] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.290958] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293441] Dynamic Preempt: voluntary [ 0.293540] rcu: Preemptible hierarchical RCU implementation. [ 0.293541] rcu: RCU event tracing is enabled. [ 0.293542] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293543] Trampoline variant of Tasks RCU enabled. [ 0.293544] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293545] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304109] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304232] xen:events: Using FIFO-based ABI [ 0.304258] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304266] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304274] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304281] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304288] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304295] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304302] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304309] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304317] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304324] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304331] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304338] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304346] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304353] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304360] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304371] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309696] Console: colour VGA+ 80x25 [ 0.324264] printk: console [tty0] enabled [ 0.325596] printk: console [hvc0] enabled [ 0.325733] ACPI: Core revision 20220331 [ 0.341225] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341388] Xen: using vcpuop timer interface [ 0.341396] installing Xen timer for CPU 0 [ 0.341545] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.341702] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342028] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342143] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342270] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342416] Spectre V2 : Mitigation: Retpolines [ 0.342528] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.342842] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.342960] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343079] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343225] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343342] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343491] MDS: Mitigation: Clear CPU buffers [ 0.343602] TAA: Mitigation: Clear CPU buffers [ 0.343705] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.343869] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344013] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344136] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344254] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344371] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362036] Freeing SMP alternatives memory: 40K [ 0.362161] pid_max: default: 32768 minimum: 301 [ 0.362724] LSM: Security Framework initializing [ 0.362845] SELinux: Initializing. [ 0.362982] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363134] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363791] cpu 0 spinlock event irq 25 [ 0.363909] VPMU disabled by hypervisor. [ 0.364343] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364487] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364642] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364707] signal: max sigframe size: 1776 [ 0.364867] rcu: Hierarchical SRCU implementation. [ 0.365012] rcu: Max phase no-delay instances is 400. [ 0.365496] smp: Bringing up secondary CPUs ... [ 0.365829] installing Xen timer for CPU 1 [ 0.366296] cpu 1 spinlock event irq 35 [ 0.366843] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367009] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367195] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.367924] installing Xen timer for CPU 2 [ 0.368394] cpu 2 spinlock event irq 41 [ 0.368794] installing Xen timer for CPU 3 [ 0.369271] cpu 3 spinlock event irq 47 [ 0.369271] installing Xen timer for CPU 4 [ 0.370044] cpu 4 spinlock event irq 53 [ 0.370044] installing Xen timer for CPU 5 [ 0.370901] cpu 5 spinlock event irq 59 [ 0.370909] installing Xen timer for CPU 6 [ 0.371746] cpu 6 spinlock event irq 65 [ 0.371963] installing Xen timer for CPU 7 [ 0.372393] cpu 7 spinlock event irq 71 [ 0.372928] smp: Brought up 1 node, 8 CPUs [ 0.373051] smpboot: Max logical packages: 1 [ 0.373268] devtmpfs: initialized [ 0.373268] x86/mm: Memory block size: 128MB [ 0.373941] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.373996] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374158] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374707] PM: RTC time: 03:43:43, date: 2024-04-22 [ 0.374962] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375107] xen:grant_table: Grant tables using version 1 layout [ 0.375243] Grant table initialized [ 0.375548] audit: initializing netlink subsys (disabled) [ 0.375727] audit: type=2000 audit(1713757424.129:1): state=initialized audit_enabled=0 res=1 [ 0.375775] thermal_sys: Registered thermal governor 'step_wise' [ 0.375775] thermal_sys: Registered thermal governor 'user_space' [ 0.375900] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376324] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376708] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503099] PCI: Using configuration type 1 for base access [ 0.505752] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.505924] ACPI: Added _OSI(Module Device) [ 0.505924] ACPI: Added _OSI(Processor Device) [ 0.505982] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.506095] ACPI: Added _OSI(Processor Aggregator Device) [ 0.536408] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.538394] xen: registering gsi 9 triggering 0 polarity 0 [ 0.540960] ACPI: Dynamic OEM Table Load: [ 0.550782] ACPI: Interpreter enabled [ 0.550913] ACPI: PM: (supports S0 S4 S5) [ 0.551024] ACPI: Using IOAPIC for interrupt routing [ 0.551168] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551317] PCI: Using E820 reservations for host bridge windows [ 0.551922] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.588224] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588353] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.588591] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589031] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589153] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.589327] PCI host bridge to bus 0000:ff [ 0.589438] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589629] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590029] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.590449] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.590864] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.591296] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.591714] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.592130] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.592544] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593013] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.593448] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.593863] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.594281] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.594704] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.595121] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.595732] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.596150] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.596763] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.597187] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.597436] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.597891] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.598388] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.598852] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.599311] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.599791] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.600252] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.600902] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.601321] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.601750] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.602210] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.602668] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.603051] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.603695] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.604115] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.604733] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.605151] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.605576] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.606037] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.606502] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606962] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.607470] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607889] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.608504] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.608931] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.609175] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.609605] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.610009] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.610428] pci_bus 0000:ff: on NUMA node 0 [ 0.615119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.615245] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.615519] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.615865] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.615984] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.616642] PCI host bridge to bus 0000:00 [ 0.617706] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.617826] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.617945] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.618094] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.618237] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.618413] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.619048] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.619562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.619928] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.620627] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.620974] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.621665] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.621942] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.622458] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.622833] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.623350] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.623726] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.624239] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.624607] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.625357] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.625977] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.626633] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.626801] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.627257] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.627598] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.627802] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.628450] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.628755] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.629170] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.629640] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.629958] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.630155] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.630695] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.631013] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.631555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.631754] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.631875] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.639878] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.640613] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.640784] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.640905] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.641196] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.641746] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.641938] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.642058] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.642345] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.642899] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.643091] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.643211] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.643721] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.643916] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.644632] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.644907] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.645651] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.645778] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.645934] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.646089] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.646249] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.646404] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.646559] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.646866] pci 0000:00:1f.2: PME# supported from D3hot [ 0.647145] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.647360] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.647606] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.647964] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.648389] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.649118] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.649418] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.649750] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.651797] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.652552] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.652770] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.653477] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.653686] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.654283] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.654492] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.655181] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.655314] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.655649] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.655797] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.656078] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.656259] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.656604] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.656805] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.656955] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.657157] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.657276] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.657846] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.658057] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.658337] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.658518] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.658860] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.659060] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.659179] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.659379] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.659498] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.659498] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.659498] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.659498] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.659610] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.659700] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.659700] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.659700] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.659700] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.660801] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.660964] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.661491] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.661952] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.662076] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.662203] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.662550] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.662667] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.662791] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.663005] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.663168] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.663691] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.664161] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.664285] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.664412] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.664747] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.665135] pci 0000:09:00.0: enabling Extended Tags [ 0.665472] pci 0000:09:00.0: supports D1 D2 [ 0.665584] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.665938] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.666062] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.666189] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.666486] pci_bus 0000:0a: extended config space not accessible [ 0.666654] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.666792] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.666957] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.667122] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.667471] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.667755] pci 0000:0a:00.0: supports D1 D2 [ 0.667866] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.668298] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.668434] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.668562] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.668952] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.669150] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.669357] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.669522] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.670034] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.670271] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670414] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670629] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670704] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671263] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.671462] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.671668] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.671749] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.672263] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.672490] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672632] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672767] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672910] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.673426] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.673624] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.673794] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.673953] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.674456] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.674682] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674704] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674919] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.675061] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.675572] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.675772] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.675982] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.676141] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.676644] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.676813] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676955] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.677170] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.677319] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.677843] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.677968] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.678094] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.678232] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.678698] pci_bus 0000:00: on NUMA node 0 [ 0.678794] xen: registering gsi 13 triggering 1 polarity 0 [ 0.679775] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.679967] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.680168] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.680354] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.680541] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.680658] ACPI: PCI: Interrupt link LNKE disabled [ 0.680776] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.680893] ACPI: PCI: Interrupt link LNKF disabled [ 0.681075] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.681191] ACPI: PCI: Interrupt link LNKG disabled [ 0.681378] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.681495] ACPI: PCI: Interrupt link LNKH disabled [ 0.681762] xen:balloon: Initialising balloon driver [ 0.682827] iommu: Default domain type: Translated [ 0.689710] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.689896] SCSI subsystem initialized [ 0.690741] libata version 3.00 loaded. [ 0.690767] ACPI: bus type USB registered [ 0.690903] usbcore: registered new interface driver usbfs [ 0.691024] usbcore: registered new interface driver hub [ 0.691144] usbcore: registered new device driver usb [ 0.691271] pps_core: LinuxPPS API ver. 1 registered [ 0.691271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.691271] PTP clock support registered [ 0.691751] Advanced Linux Sound Architecture Driver Initialized. [ 0.692001] NetLabel: Initializing [ 0.692111] NetLabel: domain hash size = 128 [ 0.692222] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.692222] NetLabel: unlabeled traffic allowed by default [ 0.692732] PCI: Using ACPI for IRQ routing [ 0.726726] PCI: pci_cache_line_size set to 64 bytes [ 0.727490] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.727493] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.727745] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.727867] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.727983] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.728705] vgaarb: loaded [ 0.730605] clocksource: Switched to clocksource tsc-early [ 0.730605] VFS: Disk quotas dquot_6.6.0 [ 0.730605] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.730605] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.730605] pnp: PnP ACPI init [ 0.730836] xen: registering gsi 8 triggering 1 polarity 0 [ 0.730852] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.730852] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.730852] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.730852] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.730852] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.730852] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.731766] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.731895] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.732013] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.732132] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.732250] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.732377] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.732495] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.732929] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.733053] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.733169] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.733286] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.733403] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.733850] xen: registering gsi 4 triggering 1 polarity 0 [ 0.733856] Already setup the GSI :4 [ 0.733967] pnp 00:03: [dma 0 disabled] [ 0.734277] xen: registering gsi 3 triggering 1 polarity 0 [ 0.734290] pnp 00:04: [dma 0 disabled] [ 0.734894] pnp: PnP ACPI: found 5 devices [ 0.764189] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.764388] NET: Registered PF_INET protocol family [ 0.764548] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.764949] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.765101] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.765246] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.765394] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.765562] TCP: Hash tables configured (established 4096 bind 4096) [ 0.765753] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.765916] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.766070] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.766468] RPC: Registered named UNIX socket transport module. [ 0.766593] RPC: Registered udp transport module. [ 0.766721] RPC: Registered tcp transport module. [ 0.766836] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.767416] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.767587] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.767774] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.767941] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.768087] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.768260] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.768470] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.768603] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.768791] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768918] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769061] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769203] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769346] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769467] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769609] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769814] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769962] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.770082] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.770225] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.770367] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.770510] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.770631] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.770799] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.770944] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.771087] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.771259] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.771391] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.771560] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.771744] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.771934] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.772055] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.772192] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.772351] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.772469] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.772644] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.772829] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.772951] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.773090] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.773253] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.773372] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.773509] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.773671] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.773850] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.774041] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.774192] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.774343] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.774493] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.774644] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.774819] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.774973] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.775091] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.775229] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.775400] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.775571] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.775729] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.775862] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.775981] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.776100] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.776220] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.776338] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.776455] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.776597] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.776772] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.776898] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.777012] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.777134] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.777249] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.777366] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.777481] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.777599] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.777724] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.777856] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.778432] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.778651] xen: registering gsi 19 triggering 0 polarity 1 [ 0.778678] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.787509] xen: registering gsi 18 triggering 0 polarity 1 [ 0.787532] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.803938] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16095 usecs [ 0.804183] xen: registering gsi 18 triggering 0 polarity 1 [ 0.804188] Already setup the GSI :18 [ 0.820018] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15518 usecs [ 0.820231] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.820379] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.820452] Unpacking initramfs... [ 0.820497] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.820853] kvm: no hardware support for 'kvm_intel' [ 0.828596] has_svm: not amd or hygon [ 0.828737] kvm: no hardware support for 'kvm_amd' [ 0.828855] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.829143] clocksource: Switched to clocksource tsc [ 0.831841] Initialise system trusted keyrings [ 0.832158] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.833666] NFS: Registering the id_resolver key type [ 0.833792] Key type id_resolver registered [ 0.833903] Key type id_legacy registered [ 0.834128] 9p: Installing v9fs 9p2000 file system support [ 0.848115] Key type asymmetric registered [ 0.848239] Asymmetric key parser 'x509' registered [ 0.848388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.848542] io scheduler mq-deadline registered [ 0.848655] io scheduler kyber registered [ 0.849469] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849500] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.850033] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850039] Already setup the GSI :16 [ 0.850653] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850658] Already setup the GSI :16 [ 0.850973] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850977] Already setup the GSI :16 [ 0.851291] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851295] Already setup the GSI :16 [ 0.851903] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851907] Already setup the GSI :16 [ 0.852508] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852512] Already setup the GSI :16 [ 0.852946] xen: registering gsi 17 triggering 0 polarity 1 [ 0.852963] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.853296] xen: registering gsi 19 triggering 0 polarity 1 [ 0.853300] Already setup the GSI :19 [ 0.853750] xen: registering gsi 16 triggering 0 polarity 1 [ 0.853754] Already setup the GSI :16 [ 0.854427] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.854601] ACPI: button: Power Button [PWRB] [ 0.854740] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.854993] ACPI: button: Power Button [PWRF] [ 0.855274] Monitor-Mwait will be used to enter C-1 state [ 0.855308] Monitor-Mwait will be used to enter C-2 state [ 0.855324] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.855667] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.856017] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.856540] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.856915] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.857548] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.858014] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.858431] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.859212] xen:xen_evtchn: Event-channel device installed [ 0.859427] xen_pciback: backend is vpci [ 0.860153] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.860508] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.861217] hpet_acpi_add: no address or irqs in _CRS [ 0.861443] Non-volatile memory driver v1.3 [ 0.861556] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.864202] loop: module loaded [ 0.870874] ahci 0000:00:1f.2: version 3.0 [ 0.870975] xen: registering gsi 16 triggering 0 polarity 1 [ 0.870984] Already setup the GSI :16 [ 0.871308] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.871472] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.887000] scsi host0: ahci [ 0.887349] scsi host1: ahci [ 0.887679] scsi host2: ahci [ 0.887979] scsi host3: ahci [ 0.888278] scsi host4: ahci [ 0.888631] scsi host5: ahci [ 0.888773] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.888918] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.889060] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.889203] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.889356] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.889499] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.889937] tun: Universal TUN/TAP device driver, 1.6 [ 0.890200] e100: Intel(R) PRO/100 Network Driver [ 0.890363] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.890521] sky2: driver version 1.30 [ 0.890708] xen_netfront: Initialising Xen virtual ethernet driver [ 0.891073] xen: registering gsi 18 triggering 0 polarity 1 [ 0.891082] Already setup the GSI :18 [ 0.891286] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.891487] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.891661] ehci-pci 0000:00:1a.0: debug port 2 [ 0.895804] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.902387] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.902622] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.902769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902911] usb usb1: Product: EHCI Host Controller [ 0.903024] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.903139] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.903445] hub 1-0:1.0: USB hub found [ 0.903598] hub 1-0:1.0: 2 ports detected [ 0.903961] xen: registering gsi 18 triggering 0 polarity 1 [ 0.903970] Already setup the GSI :18 [ 0.904160] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.904375] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.904549] ehci-pci 0000:00:1d.0: debug port 2 [ 0.908638] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.915381] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.915600] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.915746] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915888] usb usb2: Product: EHCI Host Controller [ 0.916008] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.916122] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.916417] hub 2-0:1.0: USB hub found [ 0.916540] hub 2-0:1.0: 2 ports detected [ 0.916969] xen: registering gsi 19 triggering 0 polarity 1 [ 0.916978] Already setup the GSI :19 [ 0.917184] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.917417] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.918632] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.919104] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.919306] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.919460] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.919663] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.919809] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919950] usb usb3: Product: xHCI Host Controller [ 0.920063] usb usb3: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.920182] usb usb3: SerialNumber: 0000:00:14.0 [ 0.920467] hub 3-0:1.0: USB hub found [ 0.920598] hub 3-0:1.0: 8 ports detected [ 0.921771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.921922] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.922064] usb usb4: Product: xHCI Host Controller [ 0.922177] usb usb4: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.922291] usb usb4: SerialNumber: 0000:00:14.0 [ 0.922559] hub 4-0:1.0: USB hub found [ 0.922690] hub 4-0:1.0: 6 ports detected [ 0.923911] usbcore: registered new interface driver usblp [ 0.924053] usbcore: registered new interface driver usb-storage [ 0.924201] i8042: PNP: No PS/2 controller found. [ 0.924599] rtc_cmos 00:00: RTC can wake from S4 [ 0.925254] Freeing initrd memory: 19884K [ 0.925264] rtc_cmos 00:00: registered as rtc0 [ 0.925309] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.925711] device-mapper: uevent: version 1.0.3 [ 0.925834] xen: registering gsi 18 triggering 0 polarity 1 [ 0.925845] Already setup the GSI :18 [ 0.925907] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.925992] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.926107] intel_pstate: CPU model not supported [ 0.926138] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.926239] hid: raw HID events driver (C) Jiri Kosina [ 0.926712] usbcore: registered new interface driver usbhid [ 0.926793] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.926828] usbhid: USB HID core driver [ 0.927260] Initializing XFRM netlink socket [ 0.927495] NET: Registered PF_INET6 protocol family [ 0.928073] Segment Routing with IPv6 [ 0.928192] In-situ OAM (IOAM) with IPv6 [ 0.928340] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.928603] NET: Registered PF_PACKET protocol family [ 0.928759] 9pnet: Installing 9P2000 support [ 0.928884] Key type dns_resolver registered [ 0.929641] IPI shorthand broadcast: enabled [ 0.929779] sched_clock: Marking stable (892275154, 37326516)->(1773591862, -843990192) [ 0.930358] registered taskstats version 1 [ 0.930472] Loading compiled-in X.509 certificates [ 0.933125] PM: Magic number: 4:640:715 [ 0.933362] acpi LNXCPU:1f: hash matches [ 0.933488] printk: console [netcon0] enabled [ 0.933601] netconsole: network logging started [ 0.933935] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.945677] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.946015] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.946645] ALSA device list: [ 0.946716] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.946770] No soundcards found. [ 1.144463] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.152481] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.160433] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.197527] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.197744] ata2: SATA link down (SStatus 0 SControl 300) [ 1.197884] ata6: SATA link down (SStatus 0 SControl 300) [ 1.198022] ata4: SATA link down (SStatus 0 SControl 300) [ 1.198177] ata5: SATA link down (SStatus 0 SControl 300) [ 1.198313] ata1: SATA link down (SStatus 0 SControl 300) [ 1.198721] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.273041] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.273221] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.273653] hub 1-1:1.0: USB hub found [ 1.273865] hub 1-1:1.0: 4 ports detected [ 1.280998] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.281152] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.281533] hub 2-1:1.0: USB hub found [ 1.281744] hub 2-1:1.0: 4 ports detected [ 1.287973] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.288031] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.288101] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.288111] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.288496] usb 3-3: Product: USB2.0 Hub [ 1.289371] hub 3-3:1.0: USB hub found [ 1.289886] hub 3-3:1.0: 4 ports detected [ 1.315751] ata3.00: configured for UDMA/133 [ 1.316121] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.317039] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.317116] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.317376] sd 2:0:0:0: [sda] Write Protect is off [ 1.317498] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.317564] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.317797] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.337042] sda: sda1 sda2 < sda5 > [ 1.337451] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.338697] Freeing unused kernel image (initmem) memory: 1580K [ 1.338824] Write protecting the kernel read-only data: 22528k [ 1.356640] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.357915] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.406378] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.532684] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.532836] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.533533] hub 3-4:1.0: USB hub found [ 1.533751] hub 3-4:1.0: 4 ports detected [ 1.596398] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.673918] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.674071] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.674214] usb 3-3.2: Product: USB2.0 Hub [ 1.674901] hub 3-3.2:1.0: USB hub found [ 1.675361] hub 3-3.2:1.0: 4 ports detected [ 1.816689] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.816814] Run /init as init process [ 1.816923] with arguments: [ 1.816924] /init [ 1.816925] placeholder [ 1.816926] with environment: [ 1.816927] HOME=/ [ 1.816928] TERM=linux [ 1.827374] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.932806] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.932965] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.938811] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.990648] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.993657] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.994018] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.253583] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.253743] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.254404] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.254720] xen: registering gsi 16 triggering 0 polarity 1 [ 2.254732] Already setup the GSI :16 [ 2.258918] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.259045] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.259257] xen: registering gsi 16 triggering 0 polarity 1 [ 2.259266] Already setup the GSI :16 [ 2.285932] pps pps0: new PPS source ptp0 [ 2.286123] igb 0000:07:00.0: added PHC on eth0 [ 2.286256] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.286384] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.286549] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.286663] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.286897] xen: registering gsi 17 triggering 0 polarity 1 [ 2.286906] Already setup the GSI :17 [ 2.316450] pps pps1: new PPS source ptp1 [ 2.316688] igb 0000:08:00.0: added PHC on eth1 [ 2.316820] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.316939] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.317104] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.317218] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.317456] xen: registering gsi 16 triggering 0 polarity 1 [ 2.317462] Already setup the GSI :16 [ 2.375237] igb 0000:0b:00.0: added PHC on eth2 [ 2.375390] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.375510] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.375712] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.375826] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.376049] xen: registering gsi 17 triggering 0 polarity 1 [ 2.376057] Already setup the GSI :17 [ 2.432284] igb 0000:0b:00.1: added PHC on eth3 [ 2.432432] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.432557] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.432760] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.432874] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.433112] xen: registering gsi 18 triggering 0 polarity 1 [ 2.433120] Already setup the GSI :18 [ 2.491087] igb 0000:0b:00.2: added PHC on eth4 [ 2.491260] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.491390] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.491592] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.491706] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.491946] xen: registering gsi 19 triggering 0 polarity 1 [ 2.491955] Already setup the GSI :19 [ 2.548322] igb 0000:0b:00.3: added PHC on eth5 [ 2.548476] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.548596] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.548798] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.548912] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.552041] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.560929] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.571541] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.579847] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.587720] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.598919] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.993192] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.127304] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.127448] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.420385] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.420793] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.421011] xen: registering gsi 17 triggering 0 polarity 1 [ 3.421022] Already setup the GSI :17 [ 4.163486] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.293269] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.293438] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.588211] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.590758] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.598864] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.005430] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.013067] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.533587] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.765602] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.790700] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.877553] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.438276] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.438462] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.438636] device enx0cc47a9f87be entered promiscuous mode [ 14.984984] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.094751] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.095037] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.095159] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.095452] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready