[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-20-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.109 MHz processor [ 0.000894] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001050] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001699] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001708] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018729] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018755] Using GB pages for direct mapping [ 0.019222] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019230] ACPI: Early table checksum verification disabled [ 0.019234] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019240] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019249] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019257] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019263] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019267] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019272] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019277] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019282] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019287] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019292] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019297] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019303] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019308] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019313] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019318] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019323] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019327] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019329] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019330] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019332] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019333] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019335] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019336] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019337] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019339] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019340] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019341] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019343] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019344] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019345] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019347] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019417] No NUMA configuration found [ 0.019418] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019434] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019968] Zone ranges: [ 0.019969] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019972] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019974] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019977] Device empty [ 0.019978] Movable zone start for each node [ 0.019983] Early memory node ranges [ 0.019983] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019986] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019988] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019991] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019999] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.020054] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028194] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028488] ACPI: PM-Timer IO Port: 0x408 [ 0.028500] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028503] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028504] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028506] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028518] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028524] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028527] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028531] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028537] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028539] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028546] TSC deadline timer available [ 0.028548] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028569] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028573] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028574] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028576] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028577] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028579] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028580] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028582] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028583] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028584] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028585] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028587] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028588] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028589] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028590] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028591] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028594] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028596] Booting paravirtualized kernel on bare hardware [ 0.028599] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035945] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036341] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036350] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036354] pcpu-alloc: [0] 0 1 2 3 [ 0.036395] Fallback order for Node 0: 0 [ 0.036399] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036402] Policy zone: Normal [ 0.036404] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036473] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64", will be passed to user space. [ 0.036504] random: crng init done [ 0.037548] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038116] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038203] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038216] software IO TLB: area num 4. [ 0.079407] Memory: 2033856K/8353556K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2800K init, 17404K bss, 304412K reserved, 0K cma-reserved) [ 0.079622] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079645] Kernel/User page tables isolation: enabled [ 0.079697] ftrace: allocating 40211 entries in 158 pages [ 0.090063] ftrace: allocated 158 pages with 5 groups [ 0.091006] Dynamic Preempt: voluntary [ 0.091050] rcu: Preemptible hierarchical RCU implementation. [ 0.091051] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091054] Trampoline variant of Tasks RCU enabled. [ 0.091054] Rude variant of Tasks RCU enabled. [ 0.091055] Tracing variant of Tasks RCU enabled. [ 0.091056] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091057] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098386] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098585] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103086] Console: colour VGA+ 80x25 [ 1.027413] printk: console [ttyS0] enabled [ 1.031619] ACPI: Core revision 20220331 [ 1.036268] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045407] APIC: Switch to symmetric I/O mode setup [ 1.050387] DMAR: Host address width 46 [ 1.054237] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059562] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067485] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073760] DMAR: ATSR flags: 0x0 [ 1.077079] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083353] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089712] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096065] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101465] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110587] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115981] x2apic enabled [ 1.118710] Switched APIC routing to cluster x2apic. [ 1.124218] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149401] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2908c29d, max_idle_ns: 440795222233 ns [ 1.159917] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.21 BogoMIPS (lpj=7200436) [ 1.163946] CPU0: Thermal monitoring enabled (TM1) [ 1.167998] process: using mwait in idle threads [ 1.171916] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175913] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179916] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183915] Spectre V2 : Mitigation: Retpolines [ 1.187913] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191913] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195913] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199915] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203914] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207914] MDS: Mitigation: Clear CPU buffers [ 1.211913] MMIO Stale Data: Unknown: No mitigations [ 1.215919] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219913] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223913] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227914] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231913] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260502] Freeing SMP alternatives memory: 36K [ 1.263914] pid_max: default: 32768 minimum: 301 [ 1.267948] LSM: Security Framework initializing [ 1.271932] landlock: Up and running. [ 1.275913] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279946] AppArmor: AppArmor initialized [ 1.283915] TOMOYO Linux initialized [ 1.287920] LSM support for eBPF active [ 1.291960] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295929] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304502] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308102] cblist_init_generic: Setting adjustable number of callback queues. [ 1.311914] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.315945] cblist_init_generic: Setting adjustable number of callback queues. [ 1.319914] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.323936] cblist_init_generic: Setting adjustable number of callback queues. [ 1.327914] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.331936] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.335915] ... version: 3 [ 1.339913] ... bit width: 48 [ 1.343913] ... generic registers: 8 [ 1.347913] ... value mask: 0000ffffffffffff [ 1.351913] ... max period: 00007fffffffffff [ 1.355913] ... fixed-purpose events: 3 [ 1.359913] ... event mask: 00000007000000ff [ 1.364149] signal: max sigframe size: 1776 [ 1.367938] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.371946] rcu: Hierarchical SRCU implementation. [ 1.375914] rcu: Max phase no-delay instances is 1000. [ 1.380585] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384011] smp: Bringing up secondary CPUs ... [ 1.388061] x86: Booting SMP configuration: [ 1.391919] .... node #0, CPUs: #1 #2 #3 [ 1.407066] smp: Brought up 1 node, 4 CPUs [ 1.411915] smpboot: Max logical packages: 1 [ 1.415914] smpboot: Total of 4 processors activated (14400.87 BogoMIPS) [ 1.440059] node 0 deferred pages initialised in 20ms [ 1.444359] devtmpfs: initialized [ 1.447996] x86/mm: Memory block size: 128MB [ 1.452968] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.455965] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.463927] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.467975] pinctrl core: initialized pinctrl subsystem [ 1.472800] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476196] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480073] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484072] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.487923] audit: initializing netlink subsys (disabled) [ 1.491929] audit: type=2000 audit(1713811676.404:1): state=initialized audit_enabled=0 res=1 [ 1.492066] thermal_sys: Registered thermal governor 'fair_share' [ 1.495917] thermal_sys: Registered thermal governor 'bang_bang' [ 1.499914] thermal_sys: Registered thermal governor 'step_wise' [ 1.503914] thermal_sys: Registered thermal governor 'user_space' [ 1.507914] thermal_sys: Registered thermal governor 'power_allocator' [ 1.511932] cpuidle: using governor ladder [ 1.519918] cpuidle: using governor menu [ 1.523890] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.523915] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528018] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.531916] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.535923] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540374] PCI: Using configuration type 1 for base access [ 1.544012] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549250] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.551975] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.555917] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.563917] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.571914] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.576070] ACPI: Added _OSI(Module Device) [ 1.579917] ACPI: Added _OSI(Processor Device) [ 1.583914] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.591915] ACPI: Added _OSI(Processor Aggregator Device) [ 1.720433] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.749517] ACPI: Interpreter enabled [ 1.751936] ACPI: PM: (supports S0 S1 S4 S5) [ 1.755914] ACPI: Using IOAPIC for interrupt routing [ 1.764022] HEST: Table parsing has been initialized. [ 1.768042] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.771918] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.783914] PCI: Using E820 reservations for host bridge windows [ 1.788466] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.796026] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.799918] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.803923] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.803992] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.807912] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.820012] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.828075] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.835915] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.844278] PCI host bridge to bus 0000:00 [ 1.847916] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.855914] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.863914] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.867914] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.875914] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.883914] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.891914] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.899914] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.907914] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.911945] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.915997] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.924039] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.932014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.936082] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.944012] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.948082] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.955952] pci 0000:00:03.0: enabling Extended Tags [ 1.959979] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.968068] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.971931] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.980059] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.983930] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.992050] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.999930] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 2.004048] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.011930] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.016051] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.023930] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.032048] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.035930] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.044051] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.047933] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.056049] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.063930] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.068048] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.076044] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.080040] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.087926] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.096065] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.100035] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.108057] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.111934] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.119989] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.124006] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.131934] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.139988] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.144017] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.151930] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.156004] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.164020] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.168013] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.175944] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.179915] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.188018] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.192014] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.199938] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.203915] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.212041] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.215931] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.224006] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.228018] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.236059] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.240130] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.247927] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.251920] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.259920] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.263920] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.271920] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.275921] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.279958] pci 0000:00:1f.2: PME# supported from D3hot [ 2.288005] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.291931] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.299937] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.303990] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.311935] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.320076] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.323965] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.327964] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.331997] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.339936] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.347928] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.355923] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.359940] pci 0000:04:00.0: enabling Extended Tags [ 2.364020] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.371914] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.384169] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.387917] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.391922] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.400011] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.407949] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.411951] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.419933] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.424102] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.432136] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.435917] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.443916] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.452014] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.455949] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.463951] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.467932] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.476099] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.480128] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.483917] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.491916] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.499936] pci_bus 0000:07: extended config space not accessible [ 2.503940] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.511930] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.515922] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.523922] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.531960] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.540025] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.543918] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.551920] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.559914] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.567914] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.575914] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.583914] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.595914] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.603914] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.611914] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.619914] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.632715] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.635918] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.647933] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.655914] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.663983] PCI host bridge to bus 0000:ff [ 2.667915] pci_bus 0000:ff: root bus resource [bus ff] [ 2.671927] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.679994] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.683983] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.691978] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.695974] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.703975] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.707980] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.715971] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.723972] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.727973] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.735975] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.739971] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.747975] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.751977] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.759990] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.764003] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.771996] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.775997] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.783996] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.787995] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.795998] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.799996] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.808009] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.811998] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.819996] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.823999] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.831997] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.835996] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.843995] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.847974] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.855979] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.859974] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.867977] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.871973] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.879972] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.888136] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.891969] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.899967] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.903966] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.912003] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.915966] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.923966] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.927967] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.937604] iommu: Default domain type: Translated [ 2.939915] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.948014] pps_core: LinuxPPS API ver. 1 registered [ 2.951914] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.959917] PTP clock support registered [ 2.963852] EDAC MC: Ver: 3.0.0 [ 2.968173] NetLabel: Initializing [ 2.971578] NetLabel: domain hash size = 128 [ 2.975916] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.983936] NetLabel: unlabeled traffic allowed by default [ 2.987914] PCI: Using ACPI for IRQ routing [ 2.998867] PCI: pci_cache_line_size set to 64 bytes [ 2.998992] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.998995] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.999952] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 3.003912] pci 0000:07:01.0: vgaarb: bridge control possible [ 3.003912] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.019922] vgaarb: loaded [ 3.024443] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.031914] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.037974] clocksource: Switched to clocksource tsc-early [ 3.041599] VFS: Disk quotas dquot_6.6.0 [ 3.045545] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.052613] AppArmor: AppArmor Filesystem Enabled [ 3.057348] pnp: PnP ACPI init [ 3.060556] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.067179] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.073796] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.080406] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.087150] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.094250] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.100178] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.107462] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.113585] pnp 00:07: [dma 0 disabled] [ 3.113829] pnp 00:08: [dma 0 disabled] [ 3.114116] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.120040] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.125956] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.131876] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.137795] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.144405] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.151366] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.158087] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.164293] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.171542] pnp: PnP ACPI: found 12 devices [ 3.182244] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.191209] NET: Registered PF_INET protocol family [ 3.196278] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.206613] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.215178] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.223001] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.231302] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.239095] TCP: Hash tables configured (established 65536 bind 65536) [ 3.245720] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.253273] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.260100] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.267395] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.273068] NET: Registered PF_XDP protocol family [ 3.277875] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.282851] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.287822] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.292799] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.297765] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.303861] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.311611] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.316582] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.322682] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.329471] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.334440] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.340534] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.347325] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.352294] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.359078] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.366820] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.372995] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.379174] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.385351] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.391530] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.398402] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.405274] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.412235] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.419195] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.424767] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.431985] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.437558] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.443823] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.449396] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.455661] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.461926] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.469144] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.475324] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.481503] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.487683] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.493862] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.500735] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.507607] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.514566] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.521619] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.553411] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24145 usecs [ 3.585398] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23997 usecs [ 3.592907] PCI: CLS 64 bytes, default 64 [ 3.596956] DMAR: No SATC found [ 3.596997] Trying to unpack rootfs image as initramfs... [ 3.600102] DMAR: dmar0: Using Queued invalidation [ 3.600181] pci 0000:00:00.0: Adding to iommu group 0 [ 3.615405] pci 0000:00:01.0: Adding to iommu group 1 [ 3.620483] pci 0000:00:01.1: Adding to iommu group 2 [ 3.625569] pci 0000:00:03.0: Adding to iommu group 3 [ 3.630650] pci 0000:00:04.0: Adding to iommu group 4 [ 3.635730] pci 0000:00:04.1: Adding to iommu group 5 [ 3.640808] pci 0000:00:04.2: Adding to iommu group 6 [ 3.645887] pci 0000:00:04.3: Adding to iommu group 7 [ 3.650965] pci 0000:00:04.4: Adding to iommu group 8 [ 3.656044] pci 0000:00:04.5: Adding to iommu group 9 [ 3.661121] pci 0000:00:04.6: Adding to iommu group 10 [ 3.666284] pci 0000:00:04.7: Adding to iommu group 11 [ 3.671452] pci 0000:00:05.0: Adding to iommu group 12 [ 3.676616] pci 0000:00:05.2: Adding to iommu group 13 [ 3.681786] pci 0000:00:05.4: Adding to iommu group 14 [ 3.686954] pci 0000:00:11.0: Adding to iommu group 15 [ 3.692141] pci 0000:00:16.0: Adding to iommu group 16 [ 3.697320] pci 0000:00:16.1: Adding to iommu group 16 [ 3.702495] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.707658] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.712827] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.717996] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.723164] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.728373] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.733546] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.738711] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.743875] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.749049] pci 0000:04:00.0: Adding to iommu group 23 [ 3.754214] pci 0000:05:00.0: Adding to iommu group 24 [ 3.759378] pci 0000:06:00.0: Adding to iommu group 25 [ 3.764526] pci 0000:07:01.0: Adding to iommu group 21 [ 3.769711] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.774894] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.780109] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.785275] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.790450] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.795628] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.800819] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.805990] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.811185] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.816354] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.821552] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.826719] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.831911] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.837087] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.842255] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.847420] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.852581] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.857752] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.862923] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.868090] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.873261] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.878429] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.883603] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.888774] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.893937] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.899106] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.904270] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.909447] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.914663] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.919840] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.925013] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.930188] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.935390] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.940560] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.945737] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.954779] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.961230] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.967670] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.976144] Initialise system trusted keyrings [ 3.980608] Key type blacklist registered [ 3.984703] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.993008] zbud: loaded [ 3.995870] integrity: Platform Keyring initialized [ 4.000761] integrity: Machine keyring initialized [ 4.005554] Key type asymmetric registered [ 4.009648] Asymmetric key parser 'x509' registered [ 4.040313] Freeing initrd memory: 39592K [ 4.051644] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.057430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.064871] io scheduler mq-deadline registered [ 4.071841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.078664] Monitor-Mwait will be used to enter C-1 state [ 4.078678] Monitor-Mwait will be used to enter C-2 state [ 4.078685] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.088884] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.096378] pstore: Registered erst as persistent store backend [ 4.102438] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.108872] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.116987] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.125216] Linux agpgart interface v0.103 [ 4.129448] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.138590] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.145468] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.155049] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.160022] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.165271] mousedev: PS/2 mouse device common for all mice [ 4.170880] rtc_cmos 00:02: RTC can wake from S4 [ 4.175777] rtc_cmos 00:02: registered as rtc0 [ 4.180263] rtc_cmos 00:02: setting system clock to 2024-04-22T18:48:00 UTC (1713811680) [ 4.188394] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.196215] intel_pstate: Intel P-state driver initializing [ 4.202113] ledtrig-cpu: registered to indicate activity on CPUs [ 4.225942] NET: Registered PF_INET6 protocol family [ 4.239370] Segment Routing with IPv6 [ 4.243063] In-situ OAM (IOAM) with IPv6 [ 4.247025] mip6: Mobile IPv6 [ 4.250001] NET: Registered PF_PACKET protocol family [ 4.255139] mpls_gso: MPLS GSO support [ 4.259407] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.264948] microcode: Microcode Update Driver: v2.2. [ 4.264956] IPI shorthand broadcast: enabled [ 4.274312] sched_clock: Marking stable (3284983915, 989294438)->(4646124675, -371846322) [ 4.282756] registered taskstats version 1 [ 4.286871] Loading compiled-in X.509 certificates [ 4.331208] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.339939] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.350586] zswap: loaded using pool lzo/zbud [ 4.355195] Key type .fscrypt registered [ 4.359127] Key type fscrypt-provisioning registered [ 4.364398] pstore: Using crash dump compression: deflate [ 4.377871] Key type encrypted registered [ 4.381909] AppArmor: AppArmor sha1 policy hashing enabled [ 4.387403] ima: No TPM chip found, activating TPM-bypass! [ 4.392887] ima: Allocated hash algorithm: sha256 [ 4.397606] ima: No architecture policies found [ 4.402153] evm: Initialising EVM extended attributes: [ 4.407288] evm: security.selinux [ 4.410605] evm: security.SMACK64 (disabled) [ 4.414878] evm: security.SMACK64EXEC (disabled) [ 4.419498] evm: security.SMACK64TRANSMUTE (disabled) [ 4.424549] evm: security.SMACK64MMAP (disabled) [ 4.429169] evm: security.apparmor [ 4.432574] evm: security.ima [ 4.435548] evm: security.capability [ 4.439127] evm: HMAC attrs: 0x1 [ 4.621936] Freeing unused decrypted memory: 2036K [ 4.627431] Freeing unused kernel image (initmem) memory: 2800K [ 4.633415] Write protecting the kernel read-only data: 26624k [ 4.639999] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.646958] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 4.739728] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.746162] x86/mm: Checking user space page tables [ 4.825451] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.831893] Run /init as init process [ 4.835555] with arguments: [ 4.835557] /init [ 4.835558] with environment: [ 4.835560] HOME=/ [ 4.835561] TERM=linux [ 4.835562] BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 [ 4.993317] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999513] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.009963] clocksource: Switched to clocksource tsc [ 5.054023] e1000e: Intel(R) PRO/1000 Network Driver [ 5.059001] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.065247] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.065321] ACPI: bus type USB registered [ 5.079321] usbcore: registered new interface driver usbfs [ 5.079656] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.085798] usbcore: registered new interface driver hub [ 5.097352] usbcore: registered new device driver usb [ 5.101113] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.108093] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.117743] SCSI subsystem initialized [ 5.129347] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.139720] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.144962] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.152375] ehci-pci 0000:00:1a.0: debug port 2 [ 5.160851] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.176122] libata version 3.00 loaded. [ 5.181322] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.187155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.187458] ahci 0000:00:1f.2: version 3.0 [ 5.191427] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.191433] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.191517] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.191796] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.195420] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.195425] usb usb1: Product: EHCI Host Controller [ 5.213654] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.216919] usb usb1: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.226221] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.233434] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.247503] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.252804] hub 1-0:1.0: USB hub found [ 5.276543] hub 1-0:1.0: 2 ports detected [ 5.280894] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.286136] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.293546] ehci-pci 0000:00:1d.0: debug port 2 [ 5.297932] scsi host0: ahci [ 5.301379] scsi host1: ahci [ 5.301525] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.302021] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.304443] scsi host2: ahci [ 5.310728] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.316542] scsi host3: ahci [ 5.318769] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.318774] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.318860] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.321344] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.327272] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.329290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.337688] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.344293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.350994] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.353435] scsi host4: ahci [ 5.353936] scsi host5: ahci [ 5.354005] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 35 [ 5.354009] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 35 [ 5.354012] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 35 [ 5.354014] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 35 [ 5.354017] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 35 [ 5.354020] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 35 [ 5.356738] usb usb2: Product: EHCI Host Controller [ 5.371365] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.377179] usb usb2: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.377181] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.377388] hub 2-0:1.0: USB hub found [ 5.387175] scsi host6: isci [ 5.391972] hub 2-0:1.0: 2 ports detected [ 5.481823] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.601352] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.663886] ata6: SATA link down (SStatus 0 SControl 300) [ 5.669334] ata2: SATA link down (SStatus 0 SControl 300) [ 5.674767] ata4: SATA link down (SStatus 0 SControl 300) [ 5.680207] ata5: SATA link down (SStatus 0 SControl 300) [ 5.685638] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.691900] ata3: SATA link down (SStatus 0 SControl 300) [ 5.697466] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.704679] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.713424] ata1.00: configured for UDMA/133 [ 5.717767] scsi: waiting for bus probes to complete ... [ 5.741351] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.765685] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.773876] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.781713] hub 1-1:1.0: USB hub found [ 5.785594] hub 1-1:1.0: 6 ports detected [ 5.825551] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.857238] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.864987] sd 0:0:0:0: [sda] Write Protect is off [ 5.869786] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.869812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.878930] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.909788] sda: sda1 sda2 < sda5 > [ 5.913418] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.913716] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.921616] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.933899] hub 2-1:1.0: USB hub found [ 5.937811] hub 2-1:1.0: 8 ports detected [ 6.077355] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.191538] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.199901] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.207215] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.212706] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.234046] hid: raw HID events driver (C) Jiri Kosina [ 6.246861] usbcore: registered new interface driver usbhid [ 6.252475] usbhid: USB HID core driver [ 6.259777] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.274686] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.289563] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.361576] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.377029] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.389254] device-mapper: uevent: version 1.0.3 [ 6.393953] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 7.015170] PM: Image not found (code -22) [ 7.419127] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.430759] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.616212] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.417600] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.441377] ACPI: button: Power Button [PWRB] [ 9.445880] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.453367] ACPI: button: Power Button [PWRF] [ 9.488815] dca service started, version 1.12.1 [ 9.582085] IPMI message handler: version 39.2 [ 9.589699] ipmi device interface [ 9.622810] ipmi_si: IPMI System Interface driver [ 9.627546] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.633901] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.641123] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.647026] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.653069] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.671328] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.709312] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.747708] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.781892] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.790611] ipmi_si: Adding ACPI-specified kcs state machine [ 9.796395] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.869840] ACPI: bus type drm_connector registered [ 9.879353] iTCO_vendor_support: vendor-support=0 [ 9.949944] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.957875] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.963630] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.969300] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.976264] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 10.021832] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.031508] cryptd: max_cpu_qlen set to 1000 [ 10.102561] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.114570] AVX version of gcm_enc/dec engaged. [ 10.119170] AES CTR mode by8 optimization enabled [ 10.191982] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.220839] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.232093] Console: switching to colour dummy device 80x25 [ 10.243858] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.253268] fbcon: mgag200drmfb (fb0) is primary device [ 10.400186] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.623063] Console: switching to colour frame buffer device 128x48 [ 10.663114] ipmi_ssif: IPMI SSIF Interface driver [ 10.708342] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.338640] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.338668] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.338677] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.338685] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.338694] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.338698] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.338707] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.338710] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.338719] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.338723] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.338731] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.338735] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.338744] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.338747] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.338756] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.338760] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.338767] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.338775] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.338784] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.338791] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.338799] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.338807] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.338815] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.338823] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.338833] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.338835] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.338845] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.338847] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.338857] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.338995] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.350054] EDAC sbridge: Ver: 1.1.2 [ 11.441218] intel_rapl_common: Found RAPL domain package [ 11.446551] intel_rapl_common: Found RAPL domain core [ 11.451611] intel_rapl_common: Found RAPL domain dram [ 12.564728] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.697118] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.714355] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.770720] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.315183] audit: type=1400 audit(1713811690.684:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.330278] audit: type=1400 audit(1713811690.684:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 14.345660] audit: type=1400 audit(1713811690.688:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 14.382381] audit: type=1400 audit(1713811690.752:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.397537] audit: type=1400 audit(1713811690.752:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.412481] audit: type=1400 audit(1713811690.752:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.563203] audit: type=1400 audit(1713811690.932:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1073 comm="apparmor_parser" [ 14.578506] audit: type=1400 audit(1713811690.940:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.596479] audit: type=1400 audit(1713811690.940:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.613935] audit: type=1400 audit(1713811690.944:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.994396] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 18.004318] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready