[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-20-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.142 MHz processor [ 0.000894] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001049] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001695] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001705] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018726] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018752] Using GB pages for direct mapping [ 0.019242] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019250] ACPI: Early table checksum verification disabled [ 0.019254] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019261] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019270] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019278] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019283] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019287] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019293] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019298] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019303] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019308] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019313] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019318] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019323] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019328] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019334] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019338] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019343] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019347] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019350] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019351] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019353] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019354] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019355] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019357] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019358] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019359] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019361] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019362] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019364] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019365] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019366] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019368] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019437] No NUMA configuration found [ 0.019439] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019455] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019989] Zone ranges: [ 0.019990] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019993] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019995] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019998] Device empty [ 0.019999] Movable zone start for each node [ 0.020003] Early memory node ranges [ 0.020004] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.020006] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.020008] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.020012] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.020020] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.020076] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028196] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028489] ACPI: PM-Timer IO Port: 0x408 [ 0.028501] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028504] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028505] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028507] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028518] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028525] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028528] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028531] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028538] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028540] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028547] TSC deadline timer available [ 0.028548] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028569] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028572] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028574] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028575] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028576] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028579] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028580] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028581] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028583] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028584] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028585] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028586] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028587] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028589] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028590] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028591] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028594] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028595] Booting paravirtualized kernel on bare hardware [ 0.028599] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035948] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036344] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036352] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036356] pcpu-alloc: [0] 0 1 2 3 [ 0.036395] Fallback order for Node 0: 0 [ 0.036400] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036402] Policy zone: Normal [ 0.036404] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036473] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64", will be passed to user space. [ 0.036503] random: crng init done [ 0.037554] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038124] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038211] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038224] software IO TLB: area num 4. [ 0.080158] Memory: 2087172K/8353556K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2800K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080372] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080394] Kernel/User page tables isolation: enabled [ 0.080447] ftrace: allocating 40211 entries in 158 pages [ 0.090793] ftrace: allocated 158 pages with 5 groups [ 0.091738] Dynamic Preempt: voluntary [ 0.091782] rcu: Preemptible hierarchical RCU implementation. [ 0.091783] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091785] Trampoline variant of Tasks RCU enabled. [ 0.091786] Rude variant of Tasks RCU enabled. [ 0.091786] Tracing variant of Tasks RCU enabled. [ 0.091787] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091788] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.099173] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099380] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103945] Console: colour VGA+ 80x25 [ 1.028252] printk: console [ttyS0] enabled [ 1.032451] ACPI: Core revision 20220331 [ 1.037104] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046238] APIC: Switch to symmetric I/O mode setup [ 1.051220] DMAR: Host address width 46 [ 1.055068] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060394] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068315] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074581] DMAR: ATSR flags: 0x0 [ 1.077892] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.084158] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090516] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096869] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102269] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111405] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116802] x2apic enabled [ 1.119520] Switched APIC routing to cluster x2apic. [ 1.125029] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150230] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2afc76f7, max_idle_ns: 440795240426 ns [ 1.160746] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.28 BogoMIPS (lpj=7200568) [ 1.164775] CPU0: Thermal monitoring enabled (TM1) [ 1.168828] process: using mwait in idle threads [ 1.172745] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176743] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180746] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184745] Spectre V2 : Mitigation: Retpolines [ 1.188743] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192743] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196743] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200745] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204744] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208744] MDS: Mitigation: Clear CPU buffers [ 1.212743] MMIO Stale Data: Unknown: No mitigations [ 1.216749] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220743] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224743] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228744] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232743] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261327] Freeing SMP alternatives memory: 36K [ 1.264744] pid_max: default: 32768 minimum: 301 [ 1.268777] LSM: Security Framework initializing [ 1.272762] landlock: Up and running. [ 1.276743] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280774] AppArmor: AppArmor initialized [ 1.284745] TOMOYO Linux initialized [ 1.288750] LSM support for eBPF active [ 1.292791] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296759] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.305322] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308932] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312745] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316774] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320744] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324767] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328744] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332764] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336745] ... version: 3 [ 1.340743] ... bit width: 48 [ 1.344743] ... generic registers: 8 [ 1.348743] ... value mask: 0000ffffffffffff [ 1.352743] ... max period: 00007fffffffffff [ 1.356743] ... fixed-purpose events: 3 [ 1.360743] ... event mask: 00000007000000ff [ 1.364982] signal: max sigframe size: 1776 [ 1.368768] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372776] rcu: Hierarchical SRCU implementation. [ 1.376744] rcu: Max phase no-delay instances is 1000. [ 1.381421] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384837] smp: Bringing up secondary CPUs ... [ 1.388891] x86: Booting SMP configuration: [ 1.392749] .... node #0, CPUs: #1 #2 #3 [ 1.407899] smp: Brought up 1 node, 4 CPUs [ 1.412745] smpboot: Max logical packages: 1 [ 1.416744] smpboot: Total of 4 processors activated (14401.13 BogoMIPS) [ 1.442281] node 0 deferred pages initialised in 20ms [ 1.445188] devtmpfs: initialized [ 1.448824] x86/mm: Memory block size: 128MB [ 1.453798] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456795] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460900] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464757] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468805] pinctrl core: initialized pinctrl subsystem [ 1.473631] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.477022] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480897] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484899] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488753] audit: initializing netlink subsys (disabled) [ 1.492759] audit: type=2000 audit(1713813113.404:1): state=initialized audit_enabled=0 res=1 [ 1.492896] thermal_sys: Registered thermal governor 'fair_share' [ 1.496748] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500744] thermal_sys: Registered thermal governor 'step_wise' [ 1.504744] thermal_sys: Registered thermal governor 'user_space' [ 1.508744] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512761] cpuidle: using governor ladder [ 1.520748] cpuidle: using governor menu [ 1.524716] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524745] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528843] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532746] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536753] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.541207] PCI: Using configuration type 1 for base access [ 1.544842] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.550077] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552804] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556747] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564745] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572743] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.578589] ACPI: Added _OSI(Module Device) [ 1.580749] ACPI: Added _OSI(Processor Device) [ 1.584745] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592745] ACPI: Added _OSI(Processor Aggregator Device) [ 1.721212] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.750342] ACPI: Interpreter enabled [ 1.752766] ACPI: PM: (supports S0 S1 S4 S5) [ 1.756744] ACPI: Using IOAPIC for interrupt routing [ 1.764856] HEST: Table parsing has been initialized. [ 1.768871] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.772748] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.784744] PCI: Using E820 reservations for host bridge windows [ 1.789293] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.796855] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.800748] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.804753] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.804837] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.808742] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.820841] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.828905] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.836744] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.845108] PCI host bridge to bus 0000:00 [ 1.848746] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.856744] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.864744] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.868744] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.876745] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.884744] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.892744] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.900744] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.908745] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.912774] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.916827] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.924869] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.932843] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.936911] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.944842] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.948912] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.956782] pci 0000:00:03.0: enabling Extended Tags [ 1.960808] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.964898] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.972761] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.980889] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.984760] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.992880] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 2.000760] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 2.004879] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.012760] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.016880] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.024760] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.032878] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.036760] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.044880] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.048763] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.056879] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.064760] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.068877] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.076874] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.080868] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.088756] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.096894] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.100864] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.108887] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.112764] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.120818] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.124835] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.132763] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.140818] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.144847] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.152760] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.156834] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.164854] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.168843] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.176775] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.180745] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.188848] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.192843] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.200768] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.204745] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.212866] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.216760] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.224835] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.228849] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.236889] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.240960] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.248757] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.252750] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.260750] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.264750] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.272750] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.276751] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.280788] pci 0000:00:1f.2: PME# supported from D3hot [ 2.288835] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.292761] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.300767] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.304821] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.312765] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.320906] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.324795] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.328794] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.332829] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.340767] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.348758] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.356753] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.360770] pci 0000:04:00.0: enabling Extended Tags [ 2.364850] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.372744] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.384999] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.388747] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.392752] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.400841] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.408779] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.412781] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.420762] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.424933] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.432966] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.436747] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.444746] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.452844] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.456779] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.464781] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.468762] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.476929] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.480959] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.484747] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.492746] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.500766] pci_bus 0000:07: extended config space not accessible [ 2.504769] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.512760] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.516752] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.524752] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.532790] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.540855] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.544748] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.552750] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.560744] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.568744] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.576744] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.584744] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.592744] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.604744] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.612744] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.620744] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.633547] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.636748] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.648763] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.656744] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.664812] PCI host bridge to bus 0000:ff [ 2.668746] pci_bus 0000:ff: root bus resource [bus ff] [ 2.672757] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.680824] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.684813] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.692804] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.696804] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.704806] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.708810] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.716802] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.724803] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.728803] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.736806] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.740802] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.748805] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.752807] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.760820] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.764833] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.772827] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.776827] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.784831] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.788826] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.796829] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.800827] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.808834] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.812827] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.820826] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.824827] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.832829] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.836826] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.844825] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.848804] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.856809] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.860805] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.868807] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.872803] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.880802] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.888965] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.892799] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.900797] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.904797] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.912833] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.916796] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.924796] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.928796] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.938433] iommu: Default domain type: Translated [ 2.940744] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.948841] pps_core: LinuxPPS API ver. 1 registered [ 2.952744] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.960747] PTP clock support registered [ 2.964682] EDAC MC: Ver: 3.0.0 [ 2.969006] NetLabel: Initializing [ 2.972409] NetLabel: domain hash size = 128 [ 2.976746] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.984766] NetLabel: unlabeled traffic allowed by default [ 2.988744] PCI: Using ACPI for IRQ routing [ 2.999685] PCI: pci_cache_line_size set to 64 bytes [ 2.999810] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.999813] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 3.000782] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 3.004742] pci 0000:07:01.0: vgaarb: bridge control possible [ 3.004742] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.020751] vgaarb: loaded [ 3.025280] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.028744] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.038803] clocksource: Switched to clocksource tsc-early [ 3.042450] VFS: Disk quotas dquot_6.6.0 [ 3.046399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.053469] AppArmor: AppArmor Filesystem Enabled [ 3.058202] pnp: PnP ACPI init [ 3.061420] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.068038] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.074647] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.081261] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.088006] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.095112] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.101040] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.108332] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.114457] pnp 00:07: [dma 0 disabled] [ 3.114701] pnp 00:08: [dma 0 disabled] [ 3.114988] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.120910] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.126826] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.132744] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.138666] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.145275] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.152234] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.158952] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.165152] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.172402] pnp: PnP ACPI: found 12 devices [ 3.183118] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.192087] NET: Registered PF_INET protocol family [ 3.197147] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.207477] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.216047] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.223877] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.232177] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.239972] TCP: Hash tables configured (established 65536 bind 65536) [ 3.246601] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.254155] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.260982] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.268272] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.273942] NET: Registered PF_XDP protocol family [ 3.278751] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.283724] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.288697] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.293671] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.298637] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.304735] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.312482] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.317454] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.323546] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.330336] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.335303] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.341398] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.348187] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.353157] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.359940] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.367682] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.373864] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.380044] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.386223] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.392401] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.399273] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.406146] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.413103] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.420063] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.425636] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.432853] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.438426] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.444692] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.450264] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.456529] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.462794] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.470014] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.476191] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.482372] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.488551] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.494727] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.501600] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.508472] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.515430] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.522487] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.553447] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23335 usecs [ 3.585431] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23990 usecs [ 3.592941] PCI: CLS 64 bytes, default 64 [ 3.596987] DMAR: No SATC found [ 3.597019] Trying to unpack rootfs image as initramfs... [ 3.600133] DMAR: dmar0: Using Queued invalidation [ 3.600214] pci 0000:00:00.0: Adding to iommu group 0 [ 3.615437] pci 0000:00:01.0: Adding to iommu group 1 [ 3.620516] pci 0000:00:01.1: Adding to iommu group 2 [ 3.625599] pci 0000:00:03.0: Adding to iommu group 3 [ 3.630685] pci 0000:00:04.0: Adding to iommu group 4 [ 3.635768] pci 0000:00:04.1: Adding to iommu group 5 [ 3.640847] pci 0000:00:04.2: Adding to iommu group 6 [ 3.645928] pci 0000:00:04.3: Adding to iommu group 7 [ 3.651014] pci 0000:00:04.4: Adding to iommu group 8 [ 3.656091] pci 0000:00:04.5: Adding to iommu group 9 [ 3.661173] pci 0000:00:04.6: Adding to iommu group 10 [ 3.666340] pci 0000:00:04.7: Adding to iommu group 11 [ 3.671507] pci 0000:00:05.0: Adding to iommu group 12 [ 3.676671] pci 0000:00:05.2: Adding to iommu group 13 [ 3.681844] pci 0000:00:05.4: Adding to iommu group 14 [ 3.687008] pci 0000:00:11.0: Adding to iommu group 15 [ 3.692199] pci 0000:00:16.0: Adding to iommu group 16 [ 3.697368] pci 0000:00:16.1: Adding to iommu group 16 [ 3.702539] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.707714] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.712883] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.718050] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.723219] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.728435] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.733600] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.738765] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.743930] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.749104] pci 0000:04:00.0: Adding to iommu group 23 [ 3.754269] pci 0000:05:00.0: Adding to iommu group 24 [ 3.759432] pci 0000:06:00.0: Adding to iommu group 25 [ 3.764578] pci 0000:07:01.0: Adding to iommu group 21 [ 3.769763] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.774939] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.780153] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.785318] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.790485] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.795664] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.800855] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.806024] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.811220] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.816389] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.821588] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.826760] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.831949] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.837121] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.842289] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.847455] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.852624] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.857793] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.862965] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.868130] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.873299] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.878483] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.883651] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.888815] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.893981] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.899145] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.904309] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.909478] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.914691] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.919865] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.925036] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.930212] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.935414] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.940592] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.945770] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.954813] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.961269] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.967708] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.976210] Initialise system trusted keyrings [ 3.980681] Key type blacklist registered [ 3.984776] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.993089] zbud: loaded [ 3.995952] integrity: Platform Keyring initialized [ 4.000842] integrity: Machine keyring initialized [ 4.005633] Key type asymmetric registered [ 4.009728] Asymmetric key parser 'x509' registered [ 4.041576] Freeing initrd memory: 39592K [ 4.052790] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.058577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.066015] io scheduler mq-deadline registered [ 4.072988] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.079810] Monitor-Mwait will be used to enter C-1 state [ 4.079824] Monitor-Mwait will be used to enter C-2 state [ 4.079831] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.090031] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.097523] pstore: Registered erst as persistent store backend [ 4.103600] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.110032] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.118141] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.126374] Linux agpgart interface v0.103 [ 4.130599] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.139741] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.146619] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.156479] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.161451] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.166699] mousedev: PS/2 mouse device common for all mice [ 4.172308] rtc_cmos 00:02: RTC can wake from S4 [ 4.177232] rtc_cmos 00:02: registered as rtc0 [ 4.181716] rtc_cmos 00:02: setting system clock to 2024-04-22T19:11:58 UTC (1713813118) [ 4.189854] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.197683] intel_pstate: Intel P-state driver initializing [ 4.203581] ledtrig-cpu: registered to indicate activity on CPUs [ 4.227421] NET: Registered PF_INET6 protocol family [ 4.240272] Segment Routing with IPv6 [ 4.243968] In-situ OAM (IOAM) with IPv6 [ 4.247932] mip6: Mobile IPv6 [ 4.250907] NET: Registered PF_PACKET protocol family [ 4.256066] mpls_gso: MPLS GSO support [ 4.260329] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.265874] microcode: Microcode Update Driver: v2.2. [ 4.265882] IPI shorthand broadcast: enabled [ 4.275247] sched_clock: Marking stable (3285878185, 989329337)->(4647151442, -371943920) [ 4.283673] registered taskstats version 1 [ 4.287793] Loading compiled-in X.509 certificates [ 4.332372] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.341104] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.351763] zswap: loaded using pool lzo/zbud [ 4.356359] Key type .fscrypt registered [ 4.360287] Key type fscrypt-provisioning registered [ 4.365606] pstore: Using crash dump compression: deflate [ 4.378895] Key type encrypted registered [ 4.382937] AppArmor: AppArmor sha1 policy hashing enabled [ 4.388432] ima: No TPM chip found, activating TPM-bypass! [ 4.393916] ima: Allocated hash algorithm: sha256 [ 4.398634] ima: No architecture policies found [ 4.403174] evm: Initialising EVM extended attributes: [ 4.408311] evm: security.selinux [ 4.411629] evm: security.SMACK64 (disabled) [ 4.415901] evm: security.SMACK64EXEC (disabled) [ 4.420520] evm: security.SMACK64TRANSMUTE (disabled) [ 4.425571] evm: security.SMACK64MMAP (disabled) [ 4.430191] evm: security.apparmor [ 4.433596] evm: security.ima [ 4.436567] evm: security.capability [ 4.440148] evm: HMAC attrs: 0x1 [ 4.620864] Freeing unused decrypted memory: 2036K [ 4.626346] Freeing unused kernel image (initmem) memory: 2800K [ 4.632341] Write protecting the kernel read-only data: 26624k [ 4.638889] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.645803] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 4.738251] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.744689] x86/mm: Checking user space page tables [ 4.823944] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.830389] Run /init as init process [ 4.834050] with arguments: [ 4.834052] /init [ 4.834054] with environment: [ 4.834055] HOME=/ [ 4.834056] TERM=linux [ 4.834057] BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 [ 4.993357] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999554] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.010149] clocksource: Switched to clocksource tsc [ 5.069018] ACPI: bus type USB registered [ 5.069177] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.073140] e1000e: Intel(R) PRO/1000 Network Driver [ 5.077728] SCSI subsystem initialized [ 5.078969] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.083863] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.084136] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.087616] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.088606] usbcore: registered new interface driver usbfs [ 5.136769] usbcore: registered new interface driver hub [ 5.142553] libata version 3.00 loaded. [ 5.144524] usbcore: registered new device driver usb [ 5.156549] ahci 0000:00:1f.2: version 3.0 [ 5.156905] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.163420] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.165808] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.170900] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.179061] ehci-pci 0000:00:1a.0: debug port 2 [ 5.186605] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.198110] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.216838] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.217355] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.223303] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.233452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.243067] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.243788] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.252306] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.253909] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.253913] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.259519] usb usb1: Product: EHCI Host Controller [ 5.266474] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.266596] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.269351] scsi host0: isci [ 5.272397] usb usb1: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.280226] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.284842] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.285032] hub 1-0:1.0: USB hub found [ 5.294038] scsi host1: ahci [ 5.300086] hub 1-0:1.0: 2 ports detected [ 5.303140] scsi host2: ahci [ 5.309423] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.318533] scsi host3: ahci [ 5.322997] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.326894] scsi host4: ahci [ 5.329645] ehci-pci 0000:00:1d.0: debug port 2 [ 5.333784] scsi host5: ahci [ 5.340529] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.351393] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.352159] scsi host6: ahci [ 5.369358] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.375648] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.378531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.384212] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.391599] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.399855] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.406696] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.406701] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.406784] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.407249] usb usb2: Product: EHCI Host Controller [ 5.407251] usb usb2: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.414467] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.421861] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.429772] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.436852] hub 2-0:1.0: USB hub found [ 5.443334] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.484877] hub 2-0:1.0: 2 ports detected [ 5.573389] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.738066] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.746261] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.749367] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.753428] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.766158] ata2: SATA link down (SStatus 0 SControl 300) [ 5.771579] ata3: SATA link down (SStatus 0 SControl 300) [ 5.773432] hub 1-1:1.0: USB hub found [ 5.777011] ata5: SATA link down (SStatus 0 SControl 300) [ 5.786165] ata4: SATA link down (SStatus 0 SControl 300) [ 5.786195] hub 1-1:1.0: 6 ports detected [ 5.791643] ata6: SATA link down (SStatus 0 SControl 300) [ 5.801050] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.808152] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.816035] ata1.00: configured for UDMA/133 [ 5.820601] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.830883] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.859147] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.866911] sd 1:0:0:0: [sda] Write Protect is off [ 5.871707] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.871731] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.880797] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.881277] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.913571] sda: sda1 sda2 < sda5 > [ 5.917474] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.929721] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.937911] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.945441] hub 2-1:1.0: USB hub found [ 5.949386] hub 2-1:1.0: 8 ports detected [ 6.097389] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.211725] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.223946] device-mapper: uevent: version 1.0.3 [ 6.228720] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.238213] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.246569] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.253896] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.259407] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.275686] hid: raw HID events driver (C) Jiri Kosina [ 6.286348] usbcore: registered new interface driver usbhid [ 6.291938] usbhid: USB HID core driver [ 6.298186] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.313066] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.327964] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.401550] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.919732] PM: Image not found (code -22) [ 7.282965] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.294280] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.496502] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.073698] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.097405] ACPI: button: Power Button [PWRB] [ 9.101894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.110844] ACPI: button: Power Button [PWRF] [ 9.158929] dca service started, version 1.12.1 [ 9.237004] IPMI message handler: version 39.2 [ 9.244868] ipmi device interface [ 9.268834] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.285965] iTCO_vendor_support: vendor-support=0 [ 9.285981] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.350053] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.357433] ipmi_si: IPMI System Interface driver [ 9.362195] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.368557] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.375812] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.381738] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.387819] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.390508] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 9.457938] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.466665] ipmi_si: Adding ACPI-specified kcs state machine [ 9.472440] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.502079] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.536530] ACPI: bus type drm_connector registered [ 9.553060] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.560983] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.566728] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.572385] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.620130] cryptd: max_cpu_qlen set to 1000 [ 9.695695] AVX version of gcm_enc/dec engaged. [ 9.700313] AES CTR mode by8 optimization enabled [ 9.737006] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.747949] Console: switching to colour dummy device 80x25 [ 9.759394] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.768570] fbcon: mgag200drmfb (fb0) is primary device [ 9.781424] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.800845] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.840793] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.138451] Console: switching to colour frame buffer device 128x48 [ 10.173488] ipmi_ssif: IPMI SSIF Interface driver [ 10.246779] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.019928] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.019957] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.019964] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.019973] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.019982] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.019985] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.019994] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.019998] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.020006] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.020010] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.020018] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.020022] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.020030] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.020034] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.020042] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.020046] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.020053] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.020061] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.020069] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.020076] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.020084] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.020092] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.020099] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.020107] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.020117] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.020119] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.020129] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.020131] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.020141] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.020283] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.031334] EDAC sbridge: Ver: 1.1.2 [ 11.117893] intel_rapl_common: Found RAPL domain package [ 11.123253] intel_rapl_common: Found RAPL domain core [ 11.128326] intel_rapl_common: Found RAPL domain dram [ 12.297808] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.555583] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.588942] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.645615] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.400755] audit: type=1400 audit(1713813128.380:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 14.416142] audit: type=1400 audit(1713813128.384:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 14.432027] audit: type=1400 audit(1713813128.384:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 14.459129] audit: type=1400 audit(1713813128.440:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 14.474278] audit: type=1400 audit(1713813128.440:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 14.489211] audit: type=1400 audit(1713813128.440:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 14.637353] audit: type=1400 audit(1713813128.616:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1113 comm="apparmor_parser" [ 14.674944] audit: type=1400 audit(1713813128.656:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.692971] audit: type=1400 audit(1713813128.656:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.711803] audit: type=1400 audit(1713813128.660:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.790432] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.800351] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready