[ 0.000000] Linux version 6.9.0-rc5+ (osstest@albana0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Apr 22 20:33:52 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000014] Xen PV: Detected 6 vCPUS [ 0.037587] tsc: Fast TSC calibration using PIT [ 0.037589] tsc: Detected 3101.080 MHz processor [ 0.037591] tsc: Detected 3101.132 MHz TSC [ 0.037801] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037805] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037812] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037816] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037819] MTRRs set to read-only [ 0.037822] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062730] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.062758] ACPI: Early table checksum verification disabled [ 0.064199] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064212] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064257] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064323] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.064335] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064346] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064356] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064367] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064379] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064391] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064402] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064413] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064424] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064435] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064446] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064456] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064467] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064478] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064483] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064486] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064487] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064488] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064490] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064491] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064493] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064494] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064495] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064497] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064498] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064499] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064500] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064501] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064502] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064644] APIC: Switched APIC routing to: Xen PV [ 0.067007] Zone ranges: [ 0.067008] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067011] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.067013] Normal empty [ 0.067015] Movable zone start for each node [ 0.067016] Early memory node ranges [ 0.067017] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.067020] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.067023] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.067037] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067175] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072837] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072858] p2m virtual area at (____ptrval____), size is 40000000 [ 0.280408] Remapped 106 page(s) [ 0.280955] ACPI: PM-Timer IO Port: 0x808 [ 0.280991] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.281023] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.281028] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.281054] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.281063] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.281076] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.281083] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.281108] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.281112] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.281127] CPU topo: Max. logical packages: 1 [ 0.281128] CPU topo: Max. logical dies: 1 [ 0.281129] CPU topo: Max. dies per package: 1 [ 0.281137] CPU topo: Max. threads per core: 1 [ 0.281138] CPU topo: Num. cores per package: 6 [ 0.281139] CPU topo: Num. threads per package: 6 [ 0.281140] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.281141] CPU topo: Rejected CPUs 2 [ 0.281162] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.281165] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.281168] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.281186] Booting kernel on Xen [ 0.281188] Xen version: 4.19-unstable (preserve-AD) [ 0.281194] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.287521] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288866] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u262144 [ 0.288878] pcpu-alloc: s194344 r8192 d30936 u262144 alloc=1*2097152 [ 0.288884] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288984] xen: PV spinlocks enabled [ 0.288989] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288993] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.289091] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.289160] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.289305] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.289578] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.289584] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.289589] software IO TLB: area num 8. [ 0.429613] Memory: 388040K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135992K reserved, 0K cma-reserved) [ 0.429771] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.432934] Dynamic Preempt: voluntary [ 0.433089] rcu: Preemptible hierarchical RCU implementation. [ 0.433091] rcu: RCU event tracing is enabled. [ 0.433091] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.433094] Trampoline variant of Tasks RCU enabled. [ 0.433096] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.433097] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.433118] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.440160] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.440355] xen:events: Using FIFO-based ABI [ 0.440408] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.440414] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.440421] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.440427] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.440432] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.440441] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.440446] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.440452] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.440458] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.440463] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.440470] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.440475] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.440481] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.440487] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.440492] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.440507] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.446554] Console: colour VGA+ 80x25 [ 0.446559] printk: legacy console [tty0] enabled [ 0.460001] printk: legacy console [hvc0] enabled [ 0.460660] ACPI: Core revision 20230628 [ 0.466394] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.466552] Xen: using vcpuop timer interface [ 0.466558] installing Xen timer for CPU 0 [ 0.466819] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb374cc872, max_idle_ns: 440795251611 ns [ 0.466978] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.26 BogoMIPS (lpj=3101132) [ 0.467208] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.467425] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.467536] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.467652] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.467992] Spectre V2 : Mitigation: Retpolines [ 0.468095] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.468237] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.468347] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.468459] RETBleed: Mitigation: untrained return thunk [ 0.468567] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.468728] Speculative Store Bypass: Vulnerable [ 0.468860] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.468981] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.469091] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.469201] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.469311] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.496455] Freeing SMP alternatives memory: 40K [ 0.496610] pid_max: default: 32768 minimum: 301 [ 0.496770] LSM: initializing lsm=capability,selinux [ 0.496894] SELinux: Initializing. [ 0.497051] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.497198] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.498126] cpu 0 spinlock event irq 57 [ 0.498242] VPMU disabled by hypervisor. [ 0.498706] Performance Events: PMU not available due to virtualization, using software events only. [ 0.498866] signal: max sigframe size: 1776 [ 0.499022] rcu: Hierarchical SRCU implementation. [ 0.499980] rcu: Max phase no-delay instances is 400. [ 0.506093] smp: Bringing up secondary CPUs ... [ 0.506426] installing Xen timer for CPU 1 [ 0.506901] installing Xen timer for CPU 2 [ 0.507305] installing Xen timer for CPU 3 [ 0.507679] installing Xen timer for CPU 4 [ 0.509125] installing Xen timer for CPU 5 [ 0.027461] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.510047] cpu 1 spinlock event irq 87 [ 0.027461] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.510295] cpu 2 spinlock event irq 88 [ 0.027461] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.512179] cpu 3 spinlock event irq 89 [ 0.027461] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0014 [ 0.513028] cpu 4 spinlock event irq 90 [ 0.027461] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0015 [ 0.514251] cpu 5 spinlock event irq 91 [ 0.515187] smp: Brought up 1 node, 6 CPUs [ 0.516322] devtmpfs: initialized [ 0.517300] x86/mm: Memory block size: 128MB [ 0.522359] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.523571] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.524025] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.525004] PM: RTC time: 20:55:41, date: 2024-04-22 [ 0.526362] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.526904] xen:grant_table: Grant tables using version 1 layout [ 0.527320] Grant table initialized [ 0.530272] audit: initializing netlink subsys (disabled) [ 0.530517] audit: type=2000 audit(1713819341.719:1): state=initialized audit_enabled=0 res=1 [ 0.531142] thermal_sys: Registered thermal governor 'step_wise' [ 0.531149] thermal_sys: Registered thermal governor 'user_space' [ 0.532342] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.532603] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.610146] PCI: Using configuration type 1 for base access [ 0.610349] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.612404] ACPI: Added _OSI(Module Device) [ 0.612404] ACPI: Added _OSI(Processor Device) [ 0.612980] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.613089] ACPI: Added _OSI(Processor Aggregator Device) [ 0.633898] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.634494] xen: registering gsi 9 triggering 0 polarity 1 [ 0.642418] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.645087] ACPI: Interpreter enabled [ 0.645557] ACPI: PM: (supports S0 S1 S4 S5) [ 0.645905] ACPI: Using IOAPIC for interrupt routing [ 0.646274] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.646695] PCI: Using E820 reservations for host bridge windows [ 0.649321] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.688672] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.688846] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.688986] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.689097] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.689239] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.689770] PCI host bridge to bus 0000:00 [ 0.689878] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.689980] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.690094] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.690237] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.690380] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.690522] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.690696] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.691298] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.691815] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.692062] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.692184] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.692301] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.692465] pci 0000:00:09.0: enabling Extended Tags [ 0.692716] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.693047] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.693263] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.693385] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.693511] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.693675] pci 0000:00:0a.0: enabling Extended Tags [ 0.693902] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.694186] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.694377] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.694508] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.694638] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.694773] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.694902] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.695004] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.695362] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.695553] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.695940] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.696024] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.696440] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.696629] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.696967] pci 0000:00:12.2: supports D1 D2 [ 0.696980] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.697292] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.697482] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.697867] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.698023] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.698426] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.698621] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.698958] pci 0000:00:13.2: supports D1 D2 [ 0.698980] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.699267] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.699788] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.699983] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.700112] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.700241] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.700371] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.700501] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.700666] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.700778] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.700887] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.700979] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.701281] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.701785] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.702018] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.702147] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.702268] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.702553] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.702769] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.703177] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.703570] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.703890] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.704152] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.704510] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.704882] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.705321] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.705515] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.705679] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.705818] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.706190] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.709031] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.709352] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.709549] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.709715] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.709855] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.710244] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.710705] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.710869] pci_bus 0000:03: extended config space not accessible [ 0.711037] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.711231] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.711366] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.711501] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.713108] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.713505] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.713638] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.713785] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.713932] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.713980] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.714129] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.714334] pci_bus 0000:00: on NUMA node 0 [ 0.714334] xen: registering gsi 13 triggering 1 polarity 0 [ 0.714534] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.714727] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.714922] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.714976] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.714976] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.714976] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.714976] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.714976] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.716173] xen:balloon: Initialising balloon driver [ 0.717161] iommu: Default domain type: Translated [ 0.717311] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.717311] SCSI subsystem initialized [ 0.718068] libata version 3.00 loaded. [ 0.718068] ACPI: bus type USB registered [ 0.718191] usbcore: registered new interface driver usbfs [ 0.718344] usbcore: registered new interface driver hub [ 0.718468] usbcore: registered new device driver usb [ 0.718468] pps_core: LinuxPPS API ver. 1 registered [ 0.718468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.718468] PTP clock support registered [ 0.719044] Advanced Linux Sound Architecture Driver Initialized. [ 0.719268] NetLabel: Initializing [ 0.719370] NetLabel: domain hash size = 128 [ 0.719471] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.719607] NetLabel: unlabeled traffic allowed by default [ 0.720045] PCI: Using ACPI for IRQ routing [ 0.745478] PCI: pci_cache_line_size set to 64 bytes [ 0.745660] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.745665] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.746056] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.746117] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.746232] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.746232] vgaarb: loaded [ 0.746977] clocksource: Switched to clocksource tsc-early [ 0.747790] VFS: Disk quotas dquot_6.6.0 [ 0.748396] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.748895] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.749134] pnp: PnP ACPI init [ 0.749516] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.749808] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.751098] xen: registering gsi 8 triggering 1 polarity 0 [ 0.751376] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.751711] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.751826] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.752354] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.752499] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.752608] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.752717] system 00:05: [io 0x040b] has been reserved [ 0.752834] system 00:05: [io 0x04d6] has been reserved [ 0.752943] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.753069] system 00:05: [io 0x0c14] has been reserved [ 0.753185] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.753296] system 00:05: [io 0x0c52] has been reserved [ 0.753405] system 00:05: [io 0x0c6c] has been reserved [ 0.753514] system 00:05: [io 0x0c6f] has been reserved [ 0.753622] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.753734] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.753851] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.753963] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.754088] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.754202] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.754323] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.754433] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.754542] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.754651] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.754761] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.754872] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.754994] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.755107] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.755511] xen: registering gsi 4 triggering 1 polarity 0 [ 0.755515] Already setup the GSI :4 [ 0.755615] pnp 00:06: [dma 0 disabled] [ 0.755949] xen: registering gsi 3 triggering 1 polarity 0 [ 0.755957] pnp 00:07: [dma 0 disabled] [ 0.756150] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.756562] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.756750] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.756866] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.756994] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.757111] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.757398] pnp: PnP ACPI: found 10 devices [ 0.780819] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.781100] NET: Registered PF_INET protocol family [ 0.781347] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.781872] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.782049] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.782220] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.782418] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.782630] TCP: Hash tables configured (established 4096 bind 4096) [ 0.782837] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.782955] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.783144] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.783748] RPC: Registered named UNIX socket transport module. [ 0.783911] RPC: Registered udp transport module. [ 0.784043] RPC: Registered tcp transport module. [ 0.784156] RPC: Registered tcp-with-tls transport module. [ 0.784308] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.785155] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.785279] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.785421] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.785600] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.785714] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.785844] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.786006] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.786126] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.786249] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.786418] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.786534] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.786651] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.786769] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.786888] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.787029] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.787142] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.787259] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.787372] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.787490] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.787618] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.787748] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.787878] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.788010] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.788126] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.788240] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.788606] xen: registering gsi 16 triggering 0 polarity 1 [ 0.788670] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.439185] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635464 usecs [ 1.439436] xen: registering gsi 16 triggering 0 polarity 1 [ 1.439455] Already setup the GSI :16 [ 1.464190] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24233 usecs [ 1.464454] xen: registering gsi 17 triggering 0 polarity 1 [ 1.464570] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.464779] xen: registering gsi 18 triggering 0 polarity 1 [ 1.464800] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.489196] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23900 usecs [ 1.489452] xen: registering gsi 18 triggering 0 polarity 1 [ 1.489472] Already setup the GSI :18 [ 1.513299] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23349 usecs [ 1.513602] xen: registering gsi 19 triggering 0 polarity 1 [ 1.513790] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.514030] xen: registering gsi 18 triggering 0 polarity 1 [ 1.514034] Already setup the GSI :18 [ 1.538299] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23768 usecs [ 1.538560] PCI: CLS 64 bytes, default 64 [ 1.538702] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.538822] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.539074] kvm_intel: VMX not supported by CPU 2 [ 1.539127] Unpacking initramfs... [ 1.539187] kvm_amd: SVM not supported by CPU 2 [ 1.539195] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb374cc872, max_idle_ns: 440795251611 ns [ 1.539607] clocksource: Switched to clocksource tsc [ 1.544606] Initialise system trusted keyrings [ 1.544947] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.545489] NFS: Registering the id_resolver key type [ 1.545614] Key type id_resolver registered [ 1.545717] Key type id_legacy registered [ 1.545901] 9p: Installing v9fs 9p2000 file system support [ 1.578351] Key type asymmetric registered [ 1.578930] Asymmetric key parser 'x509' registered [ 1.579562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.580146] io scheduler mq-deadline registered [ 1.580653] io scheduler kyber registered [ 1.582666] xen: registering gsi 53 triggering 0 polarity 1 [ 1.582730] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.583038] xen: registering gsi 54 triggering 0 polarity 1 [ 1.583060] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.583537] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.583741] ACPI: button: Power Button [PWRB] [ 1.583892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.584381] ACPI: button: Power Button [PWRF] [ 1.587448] ACPI: \_PR_.P001: Found 2 idle states [ 1.587774] ACPI: \_PR_.P002: Found 2 idle states [ 1.587923] ACPI: \_PR_.P003: Found 2 idle states [ 1.589648] ACPI: \_PR_.P004: Found 2 idle states [ 1.589846] ACPI: \_PR_.P005: Found 2 idle states [ 1.590247] ACPI: \_PR_.P006: Found 2 idle states [ 1.592881] xen:xen_evtchn: Event-channel device installed [ 1.594383] xen_pciback: backend is vpci [ 1.598410] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.600827] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.603001] hpet_acpi_add: no address or irqs in _CRS [ 1.603215] Non-volatile memory driver v1.3 [ 1.615312] loop: module loaded [ 1.646590] ahci 0000:00:11.0: version 3.0 [ 1.646790] xen: registering gsi 22 triggering 0 polarity 1 [ 1.646853] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.647095] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.647260] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.647373] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.652995] scsi host0: ahci [ 1.655133] scsi host1: ahci [ 1.655829] scsi host2: ahci [ 1.656817] scsi host3: ahci [ 1.658017] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.658570] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.659048] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.659590] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.660664] tun: Universal TUN/TAP device driver, 1.6 [ 1.660985] e100: Intel(R) PRO/100 Network Driver [ 1.661090] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.661212] sky2: driver version 1.30 [ 1.661380] xen_netfront: Initialising Xen virtual ethernet driver [ 1.661915] xen: registering gsi 16 triggering 0 polarity 1 [ 1.661934] Already setup the GSI :16 [ 1.662144] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.662298] xen: registering gsi 19 triggering 0 polarity 1 [ 1.662305] Already setup the GSI :19 [ 1.662319] xen: registering gsi 17 triggering 0 polarity 1 [ 1.662404] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.662588] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.662617] Already setup the GSI :17 [ 1.718924] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.719123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.719265] usb usb1: Product: OHCI PCI host controller [ 1.719374] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.719506] usb usb1: SerialNumber: 0000:00:12.0 [ 1.720135] hub 1-0:1.0: USB hub found [ 1.720314] hub 1-0:1.0: 3 ports detected [ 1.720857] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.720994] xen: registering gsi 16 triggering 0 polarity 1 [ 1.721012] Already setup the GSI :16 [ 1.721155] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.721310] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.721494] ehci-pci 0000:00:13.2: debug port 1 [ 1.721710] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.728530] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.728797] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.728945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.729087] usb usb2: Product: EHCI Host Controller [ 1.729195] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.729302] usb usb2: SerialNumber: 0000:00:13.2 [ 1.729731] hub 2-0:1.0: USB hub found [ 1.729851] hub 2-0:1.0: 6 ports detected [ 1.788968] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.789342] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.789516] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.789690] ehci-pci 0000:00:12.2: debug port 1 [ 1.789946] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.797503] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.797794] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.797943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.798083] usb usb3: Product: EHCI Host Controller [ 1.798188] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.798297] usb usb3: SerialNumber: 0000:00:12.2 [ 1.798850] hub 3-0:1.0: USB hub found [ 1.799002] hub 3-0:1.0: 6 ports detected [ 1.850764] hub 1-0:1.0: USB hub found [ 1.850922] hub 1-0:1.0: 3 ports detected [ 1.851470] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.851887] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.852105] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.866341] Freeing initrd memory: 20188K [ 1.908268] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.908460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.908631] usb usb4: Product: OHCI PCI host controller [ 1.908739] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.908847] usb usb4: SerialNumber: 0000:00:12.1 [ 1.909662] hub 4-0:1.0: USB hub found [ 1.909836] hub 4-0:1.0: 3 ports detected [ 1.911766] xen: registering gsi 18 triggering 0 polarity 1 [ 1.911810] Already setup the GSI :18 [ 1.912425] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.913323] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.914288] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.970129] ata3: SATA link down (SStatus 0 SControl 300) [ 1.970428] ata4: SATA link down (SStatus 0 SControl 300) [ 1.970828] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.971001] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.971148] usb usb5: Product: OHCI PCI host controller [ 1.971268] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.971384] usb usb5: SerialNumber: 0000:00:13.0 [ 1.971853] hub 5-0:1.0: USB hub found [ 1.971997] hub 5-0:1.0: 3 ports detected [ 1.972648] xen: registering gsi 18 triggering 0 polarity 1 [ 1.972666] Already setup the GSI :18 [ 1.972858] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.973095] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.973330] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.028938] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.029126] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.029268] usb usb6: Product: OHCI PCI host controller [ 2.029380] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.029515] usb usb6: SerialNumber: 0000:00:13.1 [ 2.030062] hub 6-0:1.0: USB hub found [ 2.030228] hub 6-0:1.0: 3 ports detected [ 2.030768] xen: registering gsi 18 triggering 0 polarity 1 [ 2.030782] Already setup the GSI :18 [ 2.030983] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.031254] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.031517] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.087866] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.088039] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.088192] usb usb7: Product: OHCI PCI host controller [ 2.088297] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.088406] usb usb7: SerialNumber: 0000:00:14.5 [ 2.088989] hub 7-0:1.0: USB hub found [ 2.089168] hub 7-0:1.0: 2 ports detected [ 2.089764] usbcore: registered new interface driver usblp [ 2.089905] usbcore: registered new interface driver usb-storage [ 2.090070] i8042: PNP: No PS/2 controller found. [ 2.090174] i8042: Probing ports directly. [ 2.093154] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.093267] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.093827] rtc_cmos 00:02: RTC can wake from S4 [ 2.094674] rtc_cmos 00:02: registered as rtc0 [ 2.094837] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.095051] device-mapper: uevent: version 1.0.3 [ 2.095424] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.095637] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.095810] hid: raw HID events driver (C) Jiri Kosina [ 2.096153] usbcore: registered new interface driver usbhid [ 2.096263] usbhid: USB HID core driver [ 2.097259] Initializing XFRM netlink socket [ 2.097389] NET: Registered PF_INET6 protocol family [ 2.098585] Segment Routing with IPv6 [ 2.098705] In-situ OAM (IOAM) with IPv6 [ 2.098856] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.099228] NET: Registered PF_PACKET protocol family [ 2.099377] 9pnet: Installing 9P2000 support [ 2.099526] Key type dns_resolver registered [ 2.099652] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.101529] IPI shorthand broadcast: enabled [ 2.106138] sched_clock: Marking stable (2079006380, 26461680)->(2114632401, -9164341) [ 2.106783] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.107280] registered taskstats version 1 [ 2.107423] Loading compiled-in X.509 certificates [ 2.109777] PM: Magic number: 4:654:953 [ 2.110050] printk: legacy console [netcon0] enabled [ 2.111664] netconsole: network logging started [ 2.111945] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.131530] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.131711] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.133096] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.133693] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.134863] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.135350] ata1.00: configured for UDMA/133 [ 2.135884] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.135893] ata2.00: configured for UDMA/100 [ 2.137431] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.137621] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.137835] sd 0:0:0:0: [sda] Write Protect is off [ 2.137948] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.138004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.139243] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.139927] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.140322] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.140547] ALSA device list: [ 2.140701] No soundcards found. [ 2.141603] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.143775] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.163025] sda: sda1 sda2 < sda5 > [ 2.163671] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.178111] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.178767] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.196786] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.197205] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.207441] Freeing unused kernel image (initmem) memory: 2664K [ 2.207949] Write protecting the kernel read-only data: 22528k [ 2.276698] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.308181] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.413787] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.413950] Run /init as init process [ 2.414054] with arguments: [ 2.414056] /init [ 2.414058] placeholder [ 2.414061] with environment: [ 2.414062] HOME=/ [ 2.414064] TERM=linux [ 2.439634] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.439823] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.439939] usb 6-2: Product: Hermon USB hidmouse Device [ 2.440047] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.446168] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.447064] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.451115] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.503192] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.724500] e1000e: Intel(R) PRO/1000 Network Driver [ 2.724627] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.724851] xen: registering gsi 48 triggering 0 polarity 1 [ 2.725369] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.725779] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.771428] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.818263] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.818421] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.818629] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.818834] xen: registering gsi 47 triggering 0 polarity 1 [ 2.818862] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.819051] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.866588] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.916311] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.916461] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.916669] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.918381] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.918736] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.036495] random: crng init done [ 3.680165] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.692939] EXT4-fs (dm-0): mounted filesystem 4c8e235c-b070-45f2-9542-7ad13126fe09 ro with ordered data mode. Quota mode: none. [ 7.575949] EXT4-fs (dm-0): re-mounted 4c8e235c-b070-45f2-9542-7ad13126fe09 r/w. Quota mode: none. [ 9.078336] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.113238] EXT4-fs (sda1): mounted filesystem f0270acd-4ba9-4eed-9278-d4e5f6f34c4d r/w with ordered data mode. Quota mode: none. [ 9.188885] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.766455] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 10.766642] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 10.766768] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 10.766923] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 14.027514] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.028047] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 14.028166] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state