[ 0.000000] Linux version 6.1.87+ (osstest@albana1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Apr 23 06:03:48 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2199.998 MHz processor [ 0.000899] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000902] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000911] Disabled [ 0.000911] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000915] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000955] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027810] RAMDISK: [mem 0x04000000-0x05369fff] [ 0.027818] ACPI: Early table checksum verification disabled [ 0.028421] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028433] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028470] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028518] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028535] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028551] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028567] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028583] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028599] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028616] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028632] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028648] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028669] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028685] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028702] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028718] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028734] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028750] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028769] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028785] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028802] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028818] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028826] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028828] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028829] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028830] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028831] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028832] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028833] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028834] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028835] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028836] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028837] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028838] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028839] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028840] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028841] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028842] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028843] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028844] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028845] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028846] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028892] Setting APIC routing to Xen PV. [ 0.032928] Zone ranges: [ 0.032929] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032931] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032933] Normal empty [ 0.032934] Movable zone start for each node [ 0.032935] Early memory node ranges [ 0.032935] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032937] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032939] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032944] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032981] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034524] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034528] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222102] Remapped 102 page(s) [ 0.223502] ACPI: PM-Timer IO Port: 0x408 [ 0.223556] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223559] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223561] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223562] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223564] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223565] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223567] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223568] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223597] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223610] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223613] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223639] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223644] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223715] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223729] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223732] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223733] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223735] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223745] Booting kernel on Xen [ 0.223745] Xen version: 4.19-unstable (preserve-AD) [ 0.223748] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229996] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230276] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230283] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230286] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230364] xen: PV spinlocks enabled [ 0.230367] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230372] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230374] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230410] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230434] random: crng init done [ 0.230484] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230509] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231844] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231846] software IO TLB: area num 8. [ 0.291749] Memory: 390036K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 133996K reserved, 0K cma-reserved) [ 0.291916] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294433] Dynamic Preempt: voluntary [ 0.294532] rcu: Preemptible hierarchical RCU implementation. [ 0.294533] rcu: RCU event tracing is enabled. [ 0.294534] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294535] Trampoline variant of Tasks RCU enabled. [ 0.294536] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294537] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.305094] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.305218] xen:events: Using FIFO-based ABI [ 0.305250] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.305259] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.305266] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.305274] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.305281] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.305289] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.305296] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.305303] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.305311] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.305318] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.305326] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.305333] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.305340] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.305348] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.305355] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.305366] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310728] Console: colour VGA+ 80x25 [ 0.325436] printk: console [tty0] enabled [ 0.326775] printk: console [hvc0] enabled [ 0.326911] ACPI: Core revision 20220331 [ 0.342412] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342578] Xen: using vcpuop timer interface [ 0.342585] installing Xen timer for CPU 0 [ 0.342735] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342893] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.343222] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.343339] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.343466] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343615] Spectre V2 : Mitigation: Retpolines [ 0.343900] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.344046] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.344165] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.344286] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.344434] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344552] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344703] MDS: Mitigation: Clear CPU buffers [ 0.344816] TAA: Mitigation: Clear CPU buffers [ 0.344897] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.345063] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.345210] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.345357] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.345475] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345595] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.363248] Freeing SMP alternatives memory: 40K [ 0.363374] pid_max: default: 32768 minimum: 301 [ 0.363915] LSM: Security Framework initializing [ 0.364037] SELinux: Initializing. [ 0.364176] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364328] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364984] cpu 0 spinlock event irq 25 [ 0.365104] VPMU disabled by hypervisor. [ 0.365541] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365688] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365844] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365898] signal: max sigframe size: 1776 [ 0.366062] rcu: Hierarchical SRCU implementation. [ 0.366187] rcu: Max phase no-delay instances is 400. [ 0.366676] smp: Bringing up secondary CPUs ... [ 0.367011] installing Xen timer for CPU 1 [ 0.367481] cpu 1 spinlock event irq 35 [ 0.368038] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.368207] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.368395] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.369118] installing Xen timer for CPU 2 [ 0.369588] cpu 2 spinlock event irq 41 [ 0.369994] installing Xen timer for CPU 3 [ 0.370460] cpu 3 spinlock event irq 47 [ 0.370460] installing Xen timer for CPU 4 [ 0.371249] cpu 4 spinlock event irq 53 [ 0.371249] installing Xen timer for CPU 5 [ 0.372093] cpu 5 spinlock event irq 59 [ 0.372102] installing Xen timer for CPU 6 [ 0.372979] cpu 6 spinlock event irq 65 [ 0.373151] installing Xen timer for CPU 7 [ 0.373602] cpu 7 spinlock event irq 71 [ 0.374161] smp: Brought up 1 node, 8 CPUs [ 0.374280] smpboot: Max logical packages: 1 [ 0.374498] devtmpfs: initialized [ 0.374932] x86/mm: Memory block size: 128MB [ 0.375279] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.375279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.375324] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.376028] PM: RTC time: 06:47:53, date: 2024-04-23 [ 0.376289] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.376435] xen:grant_table: Grant tables using version 1 layout [ 0.376578] Grant table initialized [ 0.376884] audit: initializing netlink subsys (disabled) [ 0.377034] audit: type=2000 audit(1713854873.672:1): state=initialized audit_enabled=0 res=1 [ 0.377034] thermal_sys: Registered thermal governor 'step_wise' [ 0.377034] thermal_sys: Registered thermal governor 'user_space' [ 0.377092] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377942] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.378097] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505973] PCI: Using configuration type 1 for base access [ 0.508604] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.508970] ACPI: Added _OSI(Module Device) [ 0.509063] ACPI: Added _OSI(Processor Device) [ 0.509176] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509289] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539929] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541924] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544525] ACPI: Dynamic OEM Table Load: [ 0.552801] ACPI: Interpreter enabled [ 0.552913] ACPI: PM: (supports S0 S4 S5) [ 0.553025] ACPI: Using IOAPIC for interrupt routing [ 0.553172] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553323] PCI: Using E820 reservations for host bridge windows [ 0.553891] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.579122] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.579252] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.579487] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.579750] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.579877] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.579927] PCI host bridge to bus 0000:ff [ 0.580040] pci_bus 0000:ff: root bus resource [bus ff] [ 0.580235] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.580688] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.581122] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.581549] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.581995] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.582422] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.582857] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.583205] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.583657] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.584106] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.584532] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.584962] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.585396] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.585821] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.586218] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.586643] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.587070] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.587503] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.587759] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.588232] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.588708] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.589183] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.589660] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.590130] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.590605] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.591069] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.591497] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.591933] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.592422] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.592891] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.593367] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.593829] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.594207] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.594634] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.595075] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.595511] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.595986] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.596463] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.596933] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.597488] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.597915] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.598343] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.598775] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.599034] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.599478] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.599911] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.600342] pci_bus 0000:ff: on NUMA node 0 [ 0.604608] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.604736] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.605017] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.605361] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.605481] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.605969] PCI host bridge to bus 0000:00 [ 0.606083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.606204] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.606324] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.606468] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.606613] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.606791] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.607426] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.607955] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.608325] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.608857] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.609169] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.609691] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.610050] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.610572] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.610950] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.611486] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.611857] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.612302] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.612683] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.613265] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.613897] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.614574] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.614792] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.615245] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.615591] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.615810] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.616243] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.616551] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.616770] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.617238] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.617601] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.617802] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.618317] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.618638] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.619195] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.619397] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.619519] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.627073] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.627634] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.627832] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.627905] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.628199] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.628764] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.628961] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.629083] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.629372] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.629934] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.630130] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.630252] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.630579] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.630777] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.631323] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.631646] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.632405] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.632607] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.632765] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.632926] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.633084] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.633241] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.633399] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.633713] pci 0000:00:1f.2: PME# supported from D3hot [ 0.634003] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.634221] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.634467] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.634847] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.634997] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.635722] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.636021] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.636357] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.636570] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.637331] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.637545] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.638265] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.638479] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.639196] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.639417] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.640125] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.640260] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.640602] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.640825] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.641039] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.641224] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.641577] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.641801] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.641896] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.642109] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.642229] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.642814] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.642991] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.643278] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.643491] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.643843] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.643981] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.644103] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.644307] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.644427] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.644999] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.645134] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.645272] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.645581] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.645880] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.646149] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.646268] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.646476] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.646693] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.646858] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.647314] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.647780] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.647907] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.648035] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.648392] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.648511] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.648726] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.648945] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.649110] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.649646] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.650113] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.650239] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.650367] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.650708] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.651101] pci 0000:09:00.0: enabling Extended Tags [ 0.651445] pci 0000:09:00.0: supports D1 D2 [ 0.651559] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.651920] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.652046] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.652174] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.652478] pci_bus 0000:0a: extended config space not accessible [ 0.652651] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.652881] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.652944] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.653112] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.653467] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.653759] pci 0000:0a:00.0: supports D1 D2 [ 0.653871] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.654217] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.654355] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.654484] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.654875] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.654978] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.655196] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.655359] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.655879] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.656014] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.656159] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.656380] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.656544] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.657115] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.657317] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.657527] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.657689] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.658210] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.658441] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658585] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.658805] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658896] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.659436] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.659637] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.659847] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.659942] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.660462] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.660692] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660837] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.660962] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.661106] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.661628] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.661836] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.661987] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.662149] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.662664] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.662896] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663048] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.663267] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663411] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.663997] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.664123] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.664252] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.664399] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.664877] pci_bus 0000:00: on NUMA node 0 [ 0.664974] xen: registering gsi 13 triggering 1 polarity 0 [ 0.665956] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.666153] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.666346] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.666538] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.666730] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.666848] ACPI: PCI: Interrupt link LNKE disabled [ 0.666972] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.667097] ACPI: PCI: Interrupt link LNKF disabled [ 0.667285] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.667403] ACPI: PCI: Interrupt link LNKG disabled [ 0.667589] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.667707] ACPI: PCI: Interrupt link LNKH disabled [ 0.667975] xen:balloon: Initialising balloon driver [ 0.668114] iommu: Default domain type: Translated [ 0.675900] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.676090] SCSI subsystem initialized [ 0.676218] libata version 3.00 loaded. [ 0.676218] ACPI: bus type USB registered [ 0.676218] usbcore: registered new interface driver usbfs [ 0.676218] usbcore: registered new interface driver hub [ 0.676334] usbcore: registered new device driver usb [ 0.676461] pps_core: LinuxPPS API ver. 1 registered [ 0.676899] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.677051] PTP clock support registered [ 0.677187] Advanced Linux Sound Architecture Driver Initialized. [ 0.677190] NetLabel: Initializing [ 0.677301] NetLabel: domain hash size = 128 [ 0.677447] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.677914] NetLabel: unlabeled traffic allowed by default [ 0.678052] PCI: Using ACPI for IRQ routing [ 0.714636] PCI: pci_cache_line_size set to 64 bytes [ 0.715453] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.715455] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.715479] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.715479] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.715479] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.715897] vgaarb: loaded [ 0.717737] clocksource: Switched to clocksource tsc-early [ 0.717875] VFS: Disk quotas dquot_6.6.0 [ 0.717875] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.717875] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.717875] pnp: PnP ACPI init [ 0.718070] xen: registering gsi 8 triggering 1 polarity 0 [ 0.718074] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.718074] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.718074] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.718074] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.718074] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.718074] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.719029] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.719150] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.719270] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.719390] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.719510] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.719629] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.719749] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.720178] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.720303] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.720421] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.720539] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.720657] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.721111] xen: registering gsi 4 triggering 1 polarity 0 [ 0.721117] Already setup the GSI :4 [ 0.721229] pnp 00:03: [dma 0 disabled] [ 0.721573] xen: registering gsi 3 triggering 1 polarity 0 [ 0.721584] pnp 00:04: [dma 0 disabled] [ 0.722204] pnp: PnP ACPI: found 5 devices [ 0.751497] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.751692] NET: Registered PF_INET protocol family [ 0.751854] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.752249] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.752401] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.752548] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.752699] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.752868] TCP: Hash tables configured (established 4096 bind 4096) [ 0.753059] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.753208] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.753391] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.753813] RPC: Registered named UNIX socket transport module. [ 0.753972] RPC: Registered udp transport module. [ 0.754088] RPC: Registered tcp transport module. [ 0.754201] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.754779] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.754977] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.755142] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.755304] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.755451] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.755626] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.755800] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.755947] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.756157] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756281] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.756426] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756569] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756714] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756837] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757003] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757149] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757295] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.757449] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757594] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757737] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757882] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.758023] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.758170] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.758314] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.758460] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.758594] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.758728] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.758950] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.759139] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.759314] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.759434] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.759573] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.759735] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.759854] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.760025] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.760219] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.760340] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.760481] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.760647] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.760767] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.760917] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.761111] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.761271] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.761425] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.761611] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.761764] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.761934] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.762105] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.762261] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.762415] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.762534] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.762674] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.762807] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.763036] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.763188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.763307] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.763426] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.763546] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.763667] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.763786] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.763922] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.764082] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.764200] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.764352] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.764467] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.764586] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.764702] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.764820] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.764954] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.765088] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.765205] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.765324] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.765891] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.766140] xen: registering gsi 19 triggering 0 polarity 1 [ 0.766169] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.774993] xen: registering gsi 18 triggering 0 polarity 1 [ 0.775017] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.792353] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 17016 usecs [ 0.792607] xen: registering gsi 18 triggering 0 polarity 1 [ 0.792615] Already setup the GSI :18 [ 0.809086] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16147 usecs [ 0.809300] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.809441] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.809517] Unpacking initramfs... [ 0.809592] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.809943] kvm: no hardware support for 'kvm_intel' [ 0.817790] has_svm: not amd or hygon [ 0.817924] kvm: no hardware support for 'kvm_amd' [ 0.818040] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.818326] clocksource: Switched to clocksource tsc [ 0.821000] Initialise system trusted keyrings [ 0.821314] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.822751] NFS: Registering the id_resolver key type [ 0.822874] Key type id_resolver registered [ 0.822985] Key type id_legacy registered [ 0.823206] 9p: Installing v9fs 9p2000 file system support [ 0.837363] Key type asymmetric registered [ 0.837489] Asymmetric key parser 'x509' registered [ 0.837636] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.837792] io scheduler mq-deadline registered [ 0.837905] io scheduler kyber registered [ 0.838785] xen: registering gsi 16 triggering 0 polarity 1 [ 0.838816] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.839352] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839358] Already setup the GSI :16 [ 0.839982] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839988] Already setup the GSI :16 [ 0.840311] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840315] Already setup the GSI :16 [ 0.840651] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840656] Already setup the GSI :16 [ 0.841258] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841263] Already setup the GSI :16 [ 0.841881] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841886] Already setup the GSI :16 [ 0.842327] xen: registering gsi 17 triggering 0 polarity 1 [ 0.842344] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.842700] xen: registering gsi 19 triggering 0 polarity 1 [ 0.842705] Already setup the GSI :19 [ 0.843177] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843182] Already setup the GSI :16 [ 0.843861] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.844036] ACPI: button: Power Button [PWRB] [ 0.844187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.844430] ACPI: button: Power Button [PWRF] [ 0.844710] Monitor-Mwait will be used to enter C-1 state [ 0.844746] Monitor-Mwait will be used to enter C-2 state [ 0.844763] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.845291] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.845652] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.846181] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.846652] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.847230] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.847650] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.848214] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.849040] xen:xen_evtchn: Event-channel device installed [ 0.849235] xen_pciback: backend is vpci [ 0.849949] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.850257] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.851011] hpet_acpi_add: no address or irqs in _CRS [ 0.851207] Non-volatile memory driver v1.3 [ 0.851320] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.854054] loop: module loaded [ 0.860945] ahci 0000:00:1f.2: version 3.0 [ 0.861048] xen: registering gsi 16 triggering 0 polarity 1 [ 0.861058] Already setup the GSI :16 [ 0.861387] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.861554] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.877186] scsi host0: ahci [ 0.877546] scsi host1: ahci [ 0.877837] scsi host2: ahci [ 0.878138] scsi host3: ahci [ 0.878482] scsi host4: ahci [ 0.878865] scsi host5: ahci [ 0.879011] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.879158] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.879302] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.879446] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.879602] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.879746] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.880186] tun: Universal TUN/TAP device driver, 1.6 [ 0.880421] e100: Intel(R) PRO/100 Network Driver [ 0.880549] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.880686] sky2: driver version 1.30 [ 0.880873] xen_netfront: Initialising Xen virtual ethernet driver [ 0.881258] xen: registering gsi 18 triggering 0 polarity 1 [ 0.881268] Already setup the GSI :18 [ 0.881479] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.881687] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.881865] ehci-pci 0000:00:1a.0: debug port 2 [ 0.885996] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.892595] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.892831] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.892979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.893123] usb usb1: Product: EHCI Host Controller [ 0.893237] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.893353] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.893673] hub 1-0:1.0: USB hub found [ 0.893798] hub 1-0:1.0: 2 ports detected [ 0.894163] xen: registering gsi 18 triggering 0 polarity 1 [ 0.894173] Already setup the GSI :18 [ 0.894365] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.894619] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.894803] ehci-pci 0000:00:1d.0: debug port 2 [ 0.898893] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.905595] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.905826] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.905975] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.906119] usb usb2: Product: EHCI Host Controller [ 0.906233] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.906348] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.906673] hub 2-0:1.0: USB hub found [ 0.906797] hub 2-0:1.0: 2 ports detected [ 0.907232] xen: registering gsi 19 triggering 0 polarity 1 [ 0.907242] Already setup the GSI :19 [ 0.907449] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.907661] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.908879] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.909345] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.909563] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.909711] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.909916] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.910064] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.910208] usb usb3: Product: xHCI Host Controller [ 0.910322] usb usb3: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.910437] usb usb3: SerialNumber: 0000:00:14.0 [ 0.910759] hub 3-0:1.0: USB hub found [ 0.910894] hub 3-0:1.0: 8 ports detected [ 0.912015] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.912170] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.912315] usb usb4: Product: xHCI Host Controller [ 0.912430] usb usb4: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.912562] usb usb4: SerialNumber: 0000:00:14.0 [ 0.912851] hub 4-0:1.0: USB hub found [ 0.912985] hub 4-0:1.0: 6 ports detected [ 0.914216] usbcore: registered new interface driver usblp [ 0.914362] usbcore: registered new interface driver usb-storage [ 0.914511] i8042: PNP: No PS/2 controller found. [ 0.914902] Freeing initrd memory: 19880K [ 0.914903] rtc_cmos 00:00: RTC can wake from S4 [ 0.915647] rtc_cmos 00:00: registered as rtc0 [ 0.915803] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.916010] device-mapper: uevent: version 1.0.3 [ 0.916111] xen: registering gsi 18 triggering 0 polarity 1 [ 0.916133] Already setup the GSI :18 [ 0.916220] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.916287] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.916410] intel_pstate: CPU model not supported [ 0.916441] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.916558] hid: raw HID events driver (C) Jiri Kosina [ 0.916980] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.917021] usbcore: registered new interface driver usbhid [ 0.917216] usbhid: USB HID core driver [ 0.917783] Initializing XFRM netlink socket [ 0.918012] NET: Registered PF_INET6 protocol family [ 0.918554] Segment Routing with IPv6 [ 0.918673] In-situ OAM (IOAM) with IPv6 [ 0.918814] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.919053] NET: Registered PF_PACKET protocol family [ 0.919204] 9pnet: Installing 9P2000 support [ 0.919330] Key type dns_resolver registered [ 0.920017] IPI shorthand broadcast: enabled [ 0.920155] sched_clock: Marking stable (882455895, 37523549)->(1766988208, -847008764) [ 0.920715] registered taskstats version 1 [ 0.920829] Loading compiled-in X.509 certificates [ 0.923445] PM: Magic number: 4:586:772 [ 0.923692] printk: console [netcon0] enabled [ 0.923808] netconsole: network logging started [ 0.924141] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.936057] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.936397] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.936652] ALSA device list: [ 0.936780] No soundcards found. [ 0.937252] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.136610] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.144562] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.152643] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.189766] ata2: SATA link down (SStatus 0 SControl 300) [ 1.189906] ata6: SATA link down (SStatus 0 SControl 300) [ 1.190046] ata1: SATA link down (SStatus 0 SControl 300) [ 1.190185] ata5: SATA link down (SStatus 0 SControl 300) [ 1.190341] ata4: SATA link down (SStatus 0 SControl 300) [ 1.190482] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.191762] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.273402] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.273568] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.273734] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.273886] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.274249] hub 2-1:1.0: USB hub found [ 1.274390] hub 1-1:1.0: USB hub found [ 1.274511] hub 2-1:1.0: 4 ports detected [ 1.274817] hub 1-1:1.0: 4 ports detected [ 1.280095] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.280247] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.280371] usb 3-3: Product: USB2.0 Hub [ 1.281340] hub 3-3:1.0: USB hub found [ 1.281376] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.281726] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.281931] hub 3-3:1.0: 4 ports detected [ 1.309141] ata3.00: configured for UDMA/133 [ 1.309431] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.310063] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.310145] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.310367] sd 2:0:0:0: [sda] Write Protect is off [ 1.310491] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.310560] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.310792] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.330567] sda: sda1 sda2 < sda5 > [ 1.330931] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.332107] Freeing unused kernel image (initmem) memory: 1580K [ 1.332274] Write protecting the kernel read-only data: 22528k [ 1.350830] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.352125] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.398571] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.524843] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.525006] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.525692] hub 3-4:1.0: USB hub found [ 1.525906] hub 3-4:1.0: 4 ports detected [ 1.588588] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.666016] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.666171] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.666316] usb 3-3.2: Product: USB2.0 Hub [ 1.667004] hub 3-3.2:1.0: USB hub found [ 1.667481] hub 3-3.2:1.0: 4 ports detected [ 1.818568] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.823673] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.823799] Run /init as init process [ 1.823909] with arguments: [ 1.823910] /init [ 1.823911] placeholder [ 1.823912] with environment: [ 1.823913] HOME=/ [ 1.823914] TERM=linux [ 1.923067] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.923228] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.929101] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.981805] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.984767] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.985097] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.261591] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.261762] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.262260] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.262707] xen: registering gsi 16 triggering 0 polarity 1 [ 2.262722] Already setup the GSI :16 [ 2.266172] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.266295] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.266493] xen: registering gsi 16 triggering 0 polarity 1 [ 2.266506] Already setup the GSI :16 [ 2.293217] pps pps0: new PPS source ptp0 [ 2.293435] igb 0000:07:00.0: added PHC on eth0 [ 2.293582] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.293703] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.293869] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.293984] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.294222] xen: registering gsi 17 triggering 0 polarity 1 [ 2.294232] Already setup the GSI :17 [ 2.323786] pps pps1: new PPS source ptp1 [ 2.323970] igb 0000:08:00.0: added PHC on eth1 [ 2.324103] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.324224] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.324389] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.324504] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.324743] xen: registering gsi 16 triggering 0 polarity 1 [ 2.324751] Already setup the GSI :16 [ 2.381844] igb 0000:0b:00.0: added PHC on eth2 [ 2.382009] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.382130] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.382333] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.382448] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.382690] xen: registering gsi 17 triggering 0 polarity 1 [ 2.382699] Already setup the GSI :17 [ 2.440371] igb 0000:0b:00.1: added PHC on eth3 [ 2.440508] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.440644] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.440848] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.440964] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.441181] xen: registering gsi 18 triggering 0 polarity 1 [ 2.441188] Already setup the GSI :18 [ 2.499258] igb 0000:0b:00.2: added PHC on eth4 [ 2.499401] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.499523] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.499740] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.499862] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.500106] xen: registering gsi 19 triggering 0 polarity 1 [ 2.500116] Already setup the GSI :19 [ 2.555555] igb 0000:0b:00.3: added PHC on eth5 [ 2.555697] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.555818] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.556021] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.556136] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.559065] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.579732] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.588092] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.594802] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.606989] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.618781] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.998944] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.132042] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.132207] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.428557] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.428904] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.429127] xen: registering gsi 17 triggering 0 polarity 1 [ 3.429138] Already setup the GSI :17 [ 4.168224] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.298046] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.298241] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.588550] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.591075] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.598988] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.006455] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.014825] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.592755] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.784486] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.809184] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.895878] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.473597] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.473770] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.473947] device enx0cc47a9f87be entered promiscuous mode [ 14.964190] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.070870] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.071115] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.071238] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.071512] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready