[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Apr 23 08:26:56 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000484] tsc: Detected 3092.972 MHz processor [ 0.000894] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000897] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000903] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000905] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000907] MTRRs set to read-only [ 0.000910] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000943] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024049] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.024057] ACPI: Early table checksum verification disabled [ 0.033730] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033740] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033772] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033812] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.033827] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.033843] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033858] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033873] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033889] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033904] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033919] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033934] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033950] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.033965] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.033980] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033995] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034011] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034026] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034041] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034057] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034072] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034087] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034102] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034110] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034112] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034113] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034114] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034114] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034115] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034116] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034117] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034117] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034118] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034119] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034120] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034121] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034121] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034122] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034123] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034124] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034125] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034125] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034126] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034127] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034219] APIC: Switched APIC routing to: Xen PV [ 0.038752] Zone ranges: [ 0.038754] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.038756] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.038757] Normal empty [ 0.038758] Movable zone start for each node [ 0.038759] Early memory node ranges [ 0.038759] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.038760] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.038762] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.038767] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.038808] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040429] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040434] p2m virtual area at (____ptrval____), size is 40000000 [ 0.176544] Remapped 101 page(s) [ 0.177211] ACPI: PM-Timer IO Port: 0x408 [ 0.177367] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177412] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177438] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177441] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.177494] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.177499] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.177509] ACPI: SPCR: SPCR table version 1 [ 0.177511] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.177520] CPU topo: Max. logical packages: 1 [ 0.177521] CPU topo: Max. logical dies: 1 [ 0.177521] CPU topo: Max. dies per package: 1 [ 0.177526] CPU topo: Max. threads per core: 1 [ 0.177527] CPU topo: Num. cores per package: 4 [ 0.177528] CPU topo: Num. threads per package: 4 [ 0.177528] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.177543] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.177545] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.177546] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.177548] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.177552] Booting kernel on Xen [ 0.177553] Xen version: 4.19-unstable (preserve-AD) [ 0.177555] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.182786] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183221] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u524288 [ 0.183227] pcpu-alloc: s194344 r8192 d30936 u524288 alloc=1*2097152 [ 0.183229] pcpu-alloc: [0] 0 1 2 3 [ 0.183278] xen: PV spinlocks enabled [ 0.183281] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.183283] Kernel command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.183319] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.183409] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183454] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184121] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.184124] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.184126] software IO TLB: area num 4. [ 0.245086] Memory: 388564K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135468K reserved, 0K cma-reserved) [ 0.245264] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.247386] Dynamic Preempt: voluntary [ 0.247554] rcu: Preemptible hierarchical RCU implementation. [ 0.247556] rcu: RCU event tracing is enabled. [ 0.247556] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.247558] Trampoline variant of Tasks RCU enabled. [ 0.247558] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.247559] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.247572] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.259562] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.259716] xen:events: Using FIFO-based ABI [ 0.259740] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.259749] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.259758] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.259766] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.259774] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.259783] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.259791] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.259799] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.259807] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.259815] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.259824] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.259832] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.259841] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.259849] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.259859] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.259868] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.265005] Console: colour VGA+ 80x25 [ 0.265008] printk: legacy console [tty0] enabled [ 0.281052] printk: legacy console [hvc0] enabled [ 0.282317] ACPI: Core revision 20230628 [ 0.286737] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.286896] Xen: using vcpuop timer interface [ 0.286901] installing Xen timer for CPU 0 [ 0.287052] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.287209] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092972) [ 0.287512] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.287768] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.287894] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.288217] Spectre V2 : Mitigation: Retpolines [ 0.288329] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.288472] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.288591] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.288710] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.288856] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.289002] MDS: Mitigation: Clear CPU buffers [ 0.289213] MMIO Stale Data: Unknown: No mitigations [ 0.289346] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.289488] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.289611] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.289729] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.289850] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.307110] Freeing SMP alternatives memory: 40K [ 0.307215] pid_max: default: 32768 minimum: 301 [ 0.307345] LSM: initializing lsm=capability,selinux [ 0.307483] SELinux: Initializing. [ 0.307611] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.307756] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.308223] cpu 0 spinlock event irq 25 [ 0.308339] VPMU disabled by hypervisor. [ 0.308955] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.309105] signal: max sigframe size: 1776 [ 0.309289] rcu: Hierarchical SRCU implementation. [ 0.309405] rcu: Max phase no-delay instances is 400. [ 0.309972] smp: Bringing up secondary CPUs ... [ 0.310380] installing Xen timer for CPU 1 [ 0.310876] installing Xen timer for CPU 2 [ 0.311363] installing Xen timer for CPU 3 [ 0.028336] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0002 [ 0.311582] cpu 1 spinlock event irq 45 [ 0.028336] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0004 [ 0.312245] cpu 2 spinlock event irq 46 [ 0.028336] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0006 [ 0.312505] cpu 3 spinlock event irq 47 [ 0.313276] smp: Brought up 1 node, 4 CPUs [ 0.313503] devtmpfs: initialized [ 0.313503] x86/mm: Memory block size: 128MB [ 0.313742] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.316329] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.316537] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.316690] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.316939] PM: RTC time: 08:46:52, date: 2024-04-23 [ 0.317198] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.317344] xen:grant_table: Grant tables using version 1 layout [ 0.317481] Grant table initialized [ 0.317709] audit: initializing netlink subsys (disabled) [ 0.317843] audit: type=2000 audit(1713862012.792:1): state=initialized audit_enabled=0 res=1 [ 0.317843] thermal_sys: Registered thermal governor 'step_wise' [ 0.317843] thermal_sys: Registered thermal governor 'user_space' [ 0.318242] Simple Boot Flag at 0x4f set to 0x1 [ 0.318490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.318777] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.318927] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.355412] PCI: Using configuration type 1 for base access [ 0.355584] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.355584] ACPI: Added _OSI(Module Device) [ 0.355584] ACPI: Added _OSI(Processor Device) [ 0.355584] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.355584] ACPI: Added _OSI(Processor Aggregator Device) [ 0.362202] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.362975] xen: registering gsi 9 triggering 0 polarity 0 [ 0.363589] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.368224] ACPI: Dynamic OEM Table Load: [ 0.368346] ACPI: SSDT 0xFFFF88800352C000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.369066] ACPI: Dynamic OEM Table Load: [ 0.369184] ACPI: SSDT 0xFFFF888003597000 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.369657] ACPI: Dynamic OEM Table Load: [ 0.369773] ACPI: SSDT 0xFFFF888003565800 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.370705] ACPI: _OSC evaluated successfully for all CPUs [ 0.370961] ACPI: Interpreter enabled [ 0.371088] ACPI: PM: (supports S0 S1 S3 S5) [ 0.371201] ACPI: Using IOAPIC for interrupt routing [ 0.371347] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.371497] PCI: Using E820 reservations for host bridge windows [ 0.371846] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.379978] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.382553] ACPI: \_TZ_.FN00: New power resource [ 0.382733] ACPI: \_TZ_.FN01: New power resource [ 0.382919] ACPI: \_TZ_.FN02: New power resource [ 0.383091] ACPI: \_TZ_.FN03: New power resource [ 0.383269] ACPI: \_TZ_.FN04: New power resource [ 0.384095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.384217] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.384780] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.385456] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.385577] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.386222] PCI host bridge to bus 0000:00 [ 0.386335] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.386456] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.386575] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.386718] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.386864] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.387006] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.387149] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.387253] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.387919] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.388139] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.388252] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.388410] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.388854] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.389197] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.389420] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.389968] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.390311] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.390608] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.390738] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.390870] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.391039] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.391463] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.391671] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.391792] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.392106] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.392367] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.392499] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.392629] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.393077] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.393286] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.393407] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.393730] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.393950] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.394477] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.394803] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.395100] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.395241] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.395697] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.396463] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.396681] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.396834] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.396991] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.397145] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.397252] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.397405] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.397758] pci 0000:00:1f.2: PME# supported from D3hot [ 0.398058] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.398299] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.398533] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.399012] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.399429] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.399670] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.399891] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.400058] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.400660] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.401194] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.401349] pci_bus 0000:03: extended config space not accessible [ 0.401526] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.401743] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.402131] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.402318] pci 0000:03:02.0: supports D1 D2 [ 0.403460] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.403626] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.403774] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.403922] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.404070] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.404213] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.404362] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.404594] pci_bus 0000:00: on NUMA node 0 [ 0.404757] xen: registering gsi 13 triggering 1 polarity 0 [ 0.405282] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.405471] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.405657] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.405775] ACPI: PCI: Interrupt link LNKC disabled [ 0.405956] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.406142] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.406282] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.406468] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.406654] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.406772] ACPI: PCI: Interrupt link LNKH disabled [ 0.407204] xen:balloon: Initialising balloon driver [ 0.407334] iommu: Default domain type: Translated [ 0.407392] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.407556] SCSI subsystem initialized [ 0.407683] libata version 3.00 loaded. [ 0.407683] ACPI: bus type USB registered [ 0.407683] usbcore: registered new interface driver usbfs [ 0.408220] usbcore: registered new interface driver hub [ 0.408340] usbcore: registered new device driver usb [ 0.408470] pps_core: LinuxPPS API ver. 1 registered [ 0.408584] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408734] PTP clock support registered [ 0.408867] Advanced Linux Sound Architecture Driver Initialized. [ 0.409390] NetLabel: Initializing [ 0.409501] NetLabel: domain hash size = 128 [ 0.409614] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.409745] NetLabel: unlabeled traffic allowed by default [ 0.409886] PCI: Using ACPI for IRQ routing [ 0.420341] PCI: pci_cache_line_size set to 64 bytes [ 0.420483] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.420486] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.420508] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.420508] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.420508] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.420618] vgaarb: loaded [ 0.421983] clocksource: Switched to clocksource tsc-early [ 0.422161] VFS: Disk quotas dquot_6.6.0 [ 0.422161] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.422161] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.422161] pnp: PnP ACPI init [ 0.422161] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.422209] system 00:00: [io 0xffff] has been reserved [ 0.422322] system 00:00: [io 0xffff] has been reserved [ 0.422437] system 00:00: [io 0xffff] has been reserved [ 0.422513] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.422513] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.422513] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.422513] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.422513] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.422513] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.423287] xen: registering gsi 8 triggering 1 polarity 0 [ 0.423349] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.423754] xen: registering gsi 4 triggering 1 polarity 0 [ 0.423758] Already setup the GSI :4 [ 0.424268] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.424391] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.424512] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.424631] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.424770] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.424889] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.425010] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.425130] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.425263] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.425384] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.425504] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.425886] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.426056] pnp: PnP ACPI: found 6 devices [ 0.451870] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.452041] NET: Registered PF_INET protocol family [ 0.452202] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.452539] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.452687] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.452833] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.452983] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.453148] TCP: Hash tables configured (established 4096 bind 4096) [ 0.453314] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.453463] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.453610] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.453948] RPC: Registered named UNIX socket transport module. [ 0.454068] RPC: Registered udp transport module. [ 0.454182] RPC: Registered tcp transport module. [ 0.454307] RPC: Registered tcp-with-tls transport module. [ 0.454424] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.454858] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.454981] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.455117] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.455307] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.455476] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.455596] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.455731] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.455885] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.456017] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.456171] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.456298] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.456417] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.456540] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.456670] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.456790] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.456908] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.457023] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.457142] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.457292] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.457408] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.457525] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.457643] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.457761] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.457879] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.457999] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.458118] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.458247] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.458480] xen: registering gsi 22 triggering 0 polarity 1 [ 0.458504] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.480325] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21384 usecs [ 0.480547] xen: registering gsi 20 triggering 0 polarity 1 [ 0.480571] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.502327] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21313 usecs [ 0.502529] PCI: CLS 64 bytes, default 64 [ 0.502648] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.502766] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.502798] Unpacking initramfs... [ 0.502965] kvm_intel: VMX not supported by CPU 0 [ 0.503137] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.503266] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.503450] clocksource: Switched to clocksource tsc [ 0.506241] Initialise system trusted keyrings [ 0.506495] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.506794] NFS: Registering the id_resolver key type [ 0.506918] Key type id_resolver registered [ 0.507028] Key type id_legacy registered [ 0.507182] 9p: Installing v9fs 9p2000 file system support [ 0.520334] Key type asymmetric registered [ 0.520471] Asymmetric key parser 'x509' registered [ 0.520616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.520771] io scheduler mq-deadline registered [ 0.520888] io scheduler kyber registered [ 0.521421] xen: registering gsi 16 triggering 0 polarity 1 [ 0.521452] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.521681] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.522048] xen: registering gsi 16 triggering 0 polarity 1 [ 0.522053] Already setup the GSI :16 [ 0.522367] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.522795] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.522998] ACPI: button: Sleep Button [SLPB] [ 0.523140] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.523352] ACPI: button: Power Button [PWRF] [ 0.523835] Monitor-Mwait will be used to enter C-1 state [ 0.523850] Monitor-Mwait will be used to enter C-3 state [ 0.523859] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.524213] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.524629] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.525064] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.525767] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.525888] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.526201] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.526321] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.526840] xen:xen_evtchn: Event-channel device installed [ 0.527041] xen_pciback: backend is vpci [ 0.527810] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.528644] hpet_acpi_add: no address or irqs in _CRS [ 0.528828] Non-volatile memory driver v1.3 [ 0.530462] loop: module loaded [ 0.535284] ahci 0000:00:1f.2: version 3.0 [ 0.535397] xen: registering gsi 21 triggering 0 polarity 1 [ 0.535427] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.545751] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.545911] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.546029] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.563128] scsi host0: ahci [ 0.563592] scsi host1: ahci [ 0.563984] scsi host2: ahci [ 0.564306] scsi host3: ahci [ 0.564660] scsi host4: ahci [ 0.564976] scsi host5: ahci [ 0.565120] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.565269] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.565428] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.565574] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.565723] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.565889] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.566242] tun: Universal TUN/TAP device driver, 1.6 [ 0.566460] e100: Intel(R) PRO/100 Network Driver [ 0.566576] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.566698] sky2: driver version 1.30 [ 0.566830] xen_netfront: Initialising Xen virtual ethernet driver [ 0.567096] usbcore: registered new interface driver usblp [ 0.567255] usbcore: registered new interface driver usb-storage [ 0.567310] xen: registering gsi 22 triggering 0 polarity 1 [ 0.567397] Already setup the GSI :22 [ 0.567420] i8042: PNP: No PS/2 controller found. [ 0.567602] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.567795] xen: registering gsi 20 triggering 0 polarity 1 [ 0.567801] Already setup the GSI :20 [ 0.567815] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.567824] rtc_cmos 00:01: RTC can wake from S4 [ 0.568199] ehci-pci 0000:00:1a.0: debug port 2 [ 0.568430] rtc_cmos 00:01: registered as rtc0 [ 0.568605] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.568765] device-mapper: uevent: version 1.0.3 [ 0.568945] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.569116] intel_pstate: CPU model not supported [ 0.569253] hid: raw HID events driver (C) Jiri Kosina [ 0.569493] usbcore: registered new interface driver usbhid [ 0.569623] usbhid: USB HID core driver [ 0.570025] Initializing XFRM netlink socket [ 0.570170] NET: Registered PF_INET6 protocol family [ 0.570477] xen: registering gsi 22 triggering 0 polarity 1 [ 0.570482] Already setup the GSI :22 [ 0.570699] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.570918] Segment Routing with IPv6 [ 0.571060] In-situ OAM (IOAM) with IPv6 [ 0.571216] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.571511] NET: Registered PF_PACKET protocol family [ 0.571670] 9pnet: Installing 9P2000 support [ 0.571819] Key type dns_resolver registered [ 0.572290] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.572721] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.572871] IPI shorthand broadcast: enabled [ 0.575150] sched_clock: Marking stable (547006833, 27336166)->(579226740, -4883741) [ 0.575684] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.577461] registered taskstats version 1 [ 0.577574] Loading compiled-in X.509 certificates [ 0.578785] PM: Magic number: 4:798:776 [ 0.578968] printk: legacy console [netcon0] enabled [ 0.579084] netconsole: network logging started [ 0.579362] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.579434] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.579603] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.579778] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.579922] usb usb1: Product: EHCI Host Controller [ 0.580036] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.580154] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.580509] hub 1-0:1.0: USB hub found [ 0.580641] hub 1-0:1.0: 2 ports detected [ 0.580964] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.581164] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.581357] ehci-pci 0000:00:1d.0: debug port 2 [ 0.585487] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.592376] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.592627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.592774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.592917] usb usb2: Product: EHCI Host Controller [ 0.593032] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.593150] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.593436] hub 2-0:1.0: USB hub found [ 0.593610] hub 2-0:1.0: 2 ports detected [ 0.596765] Freeing initrd memory: 20116K [ 0.608893] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.609211] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.609822] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.610005] ALSA device list: [ 0.610116] No soundcards found. [ 0.816399] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.832384] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.876901] ata6: SATA link down (SStatus 0 SControl 300) [ 0.877042] ata4: SATA link down (SStatus 0 SControl 300) [ 0.877182] ata2: SATA link down (SStatus 0 SControl 300) [ 0.877322] ata5: SATA link down (SStatus 0 SControl 300) [ 0.877477] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.877613] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.879549] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.880046] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.881232] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.882133] ata3.00: configured for UDMA/100 [ 0.882828] ata1.00: configured for UDMA/133 [ 0.883142] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.883850] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.883852] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.884138] sd 0:0:0:0: [sda] Write Protect is off [ 0.884254] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.884289] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.884516] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.894873] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.917805] sda: sda1 sda2 < sda5 > [ 0.918392] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 0.926198] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.926373] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.942695] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.942879] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.944750] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.944899] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.945001] Freeing unused kernel image (initmem) memory: 2664K [ 0.945139] Write protecting the kernel read-only data: 22528k [ 0.945327] hub 1-1:1.0: USB hub found [ 0.945620] hub 1-1:1.0: 6 ports detected [ 0.960760] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.960912] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.961272] hub 2-1:1.0: USB hub found [ 0.961490] hub 2-1:1.0: 6 ports detected [ 0.963747] Freeing unused kernel image (rodata/data gap) memory: 100K [ 1.135313] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.135448] Run /init as init process [ 1.135558] with arguments: [ 1.135559] /init [ 1.135560] placeholder [ 1.135561] with environment: [ 1.135562] HOME=/ [ 1.135563] TERM=linux [ 1.486331] e1000e: Intel(R) PRO/1000 Network Driver [ 1.486473] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.486703] xen: registering gsi 19 triggering 0 polarity 1 [ 1.486733] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.489522] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.608138] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.720095] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3d [ 1.720249] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.720419] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.720654] xen: registering gsi 16 triggering 0 polarity 1 [ 1.720662] Already setup the GSI :16 [ 1.721087] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.764314] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.813258] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3c [ 1.813421] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.813627] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.815933] e1000e 0000:02:00.0 enx001e6796a53c: renamed from eth1 [ 1.816272] e1000e 0000:00:19.0 enx001e6796a53d: renamed from eth0 [ 1.837367] random: crng init done [ 2.455107] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.460184] EXT4-fs (dm-0): mounted filesystem 27bb0e31-3b52-497f-a2d7-fd4871866e76 ro with ordered data mode. Quota mode: none. [ 5.959430] EXT4-fs (dm-0): re-mounted 27bb0e31-3b52-497f-a2d7-fd4871866e76 r/w. Quota mode: none. [ 7.599007] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.617279] EXT4-fs (sda1): mounted filesystem 0d8e0f12-8ed2-48a3-ad3b-23860da3c95c r/w with ordered data mode. Quota mode: none. [ 7.692136] Adding 1949692k swap on /dev/mapper/italia1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.465789] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 9.467598] xenbr0: port 1(enx001e6796a53c) entered disabled state [ 9.467724] e1000e 0000:02:00.0 enx001e6796a53c: entered allmulticast mode [ 9.467878] e1000e 0000:02:00.0 enx001e6796a53c: entered promiscuous mode [ 11.946508] e1000e 0000:02:00.0 enx001e6796a53c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.947112] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 11.947244] xenbr0: port 1(enx001e6796a53c) entered forwarding state