[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Apr 23 08:26:56 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000010] Xen PV: Detected 4 vCPUS [ 0.038654] tsc: Fast TSC calibration using PIT [ 0.038656] tsc: Detected 2799.871 MHz processor [ 0.038657] tsc: Detected 2800.008 MHz TSC [ 0.038866] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038870] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038877] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.038880] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038882] MTRRs set to read-only [ 0.038885] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.064777] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.064788] ACPI: Early table checksum verification disabled [ 0.065534] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.065543] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.065569] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.065601] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.065612] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.065622] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065631] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065641] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065651] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065661] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065672] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065682] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.065692] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.065701] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.065711] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.065721] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.065731] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.065736] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.065738] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.065740] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065741] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065743] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.065744] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.065745] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.065747] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.065748] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.065749] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.065750] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.065752] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.065753] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.065754] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.065842] APIC: Switched APIC routing to: Xen PV [ 0.068161] Zone ranges: [ 0.068162] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068165] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.068168] Normal empty [ 0.068169] Movable zone start for each node [ 0.068170] Early memory node ranges [ 0.068171] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068173] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068175] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068182] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068244] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.070567] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.070573] p2m virtual area at (____ptrval____), size is 40000000 [ 0.290455] Remapped 102 page(s) [ 0.290962] ACPI: PM-Timer IO Port: 0x808 [ 0.290983] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.291006] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.291009] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.291029] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.291037] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.291047] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.291051] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.291069] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.291073] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.291083] CPU topo: Max. logical packages: 1 [ 0.291084] CPU topo: Max. logical dies: 1 [ 0.291085] CPU topo: Max. dies per package: 1 [ 0.291091] CPU topo: Max. threads per core: 1 [ 0.291092] CPU topo: Num. cores per package: 4 [ 0.291093] CPU topo: Num. threads per package: 4 [ 0.291094] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.291095] CPU topo: Rejected CPUs 4 [ 0.291111] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.291114] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.291115] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.291118] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.291121] Booting kernel on Xen [ 0.291122] Xen version: 4.19-unstable (preserve-AD) [ 0.291126] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.297349] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.297902] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u524288 [ 0.297910] pcpu-alloc: s194344 r8192 d30936 u524288 alloc=1*2097152 [ 0.297914] pcpu-alloc: [0] 0 1 2 3 [ 0.297967] xen: PV spinlocks enabled [ 0.297971] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.297974] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.298031] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.298155] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298213] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.298402] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.298406] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.298409] software IO TLB: area num 4. [ 0.367404] Memory: 388496K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135536K reserved, 0K cma-reserved) [ 0.367513] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.369979] Dynamic Preempt: voluntary [ 0.370081] rcu: Preemptible hierarchical RCU implementation. [ 0.370082] rcu: RCU event tracing is enabled. [ 0.370083] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.370085] Trampoline variant of Tasks RCU enabled. [ 0.370086] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.370087] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.370098] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.376907] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.377033] xen:events: Using FIFO-based ABI [ 0.377056] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.377065] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.377071] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.377077] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.377082] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.377087] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.377093] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.377098] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.377104] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.377109] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.377114] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.377120] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.377125] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.377130] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.377136] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.377145] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.383246] Console: colour VGA+ 80x25 [ 0.383249] printk: legacy console [tty0] enabled [ 0.396708] printk: legacy console [hvc0] enabled [ 0.400792] ACPI: Core revision 20230628 [ 0.406076] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.406474] Xen: using vcpuop timer interface [ 0.406518] installing Xen timer for CPU 0 [ 0.407490] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c480aba0, max_idle_ns: 440795211062 ns [ 0.407875] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.01 BogoMIPS (lpj=2800008) [ 0.409411] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.410066] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.410405] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.410732] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.410894] Spectre V2 : Mitigation: Retpolines [ 0.411180] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.411591] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.411889] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.412183] RETBleed: Mitigation: untrained return thunk [ 0.412471] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.412857] Speculative Store Bypass: Vulnerable [ 0.413224] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.413464] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.413572] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.413680] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.413788] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.435016] Freeing SMP alternatives memory: 40K [ 0.435135] pid_max: default: 32768 minimum: 301 [ 0.435265] LSM: initializing lsm=capability,selinux [ 0.435375] SELinux: Initializing. [ 0.435504] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.435673] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.436989] cpu 0 spinlock event irq 57 [ 0.437103] VPMU disabled by hypervisor. [ 0.437565] Performance Events: PMU not available due to virtualization, using software events only. [ 0.437725] signal: max sigframe size: 1776 [ 0.437893] rcu: Hierarchical SRCU implementation. [ 0.438867] rcu: Max phase no-delay instances is 400. [ 0.444348] smp: Bringing up secondary CPUs ... [ 0.444638] installing Xen timer for CPU 1 [ 0.445034] installing Xen timer for CPU 2 [ 0.445391] installing Xen timer for CPU 3 [ 0.031715] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.445606] cpu 1 spinlock event irq 77 [ 0.031715] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.445908] cpu 2 spinlock event irq 78 [ 0.031715] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.446162] cpu 3 spinlock event irq 79 [ 0.447000] smp: Brought up 1 node, 4 CPUs [ 0.447307] devtmpfs: initialized [ 0.447307] x86/mm: Memory block size: 128MB [ 0.448270] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.448270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.448292] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.448975] PM: RTC time: 09:48:14, date: 2024-04-23 [ 0.449288] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.449427] xen:grant_table: Grant tables using version 1 layout [ 0.449550] Grant table initialized [ 0.449883] audit: initializing netlink subsys (disabled) [ 0.450080] audit: type=2000 audit(1713865695.050:1): state=initialized audit_enabled=0 res=1 [ 0.450080] thermal_sys: Registered thermal governor 'step_wise' [ 0.450080] thermal_sys: Registered thermal governor 'user_space' [ 0.451061] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.451386] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.528972] PCI: Using configuration type 1 for base access [ 0.529154] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.529949] ACPI: Added _OSI(Module Device) [ 0.530032] ACPI: Added _OSI(Processor Device) [ 0.530140] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.530256] ACPI: Added _OSI(Processor Aggregator Device) [ 0.535701] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.536296] xen: registering gsi 9 triggering 0 polarity 1 [ 0.538070] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.539060] ACPI: Interpreter enabled [ 0.539179] ACPI: PM: (supports S0 S1 S4 S5) [ 0.539280] ACPI: Using IOAPIC for interrupt routing [ 0.539496] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.539644] PCI: Using E820 reservations for host bridge windows [ 0.539949] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.550028] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.550144] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.550296] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.550445] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.550590] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.551035] PCI host bridge to bus 0000:00 [ 0.551136] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.551247] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.551358] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.551503] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.551643] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.551847] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.551916] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.552455] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.552992] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.553242] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.553359] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.553476] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.553638] pci 0000:00:09.0: enabling Extended Tags [ 0.553859] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.554146] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.554376] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.554535] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.554648] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.554809] pci 0000:00:0a.0: enabling Extended Tags [ 0.554986] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.555293] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.555511] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.555639] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.555770] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.555891] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.556018] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.556145] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.556310] pci 0000:00:11.0: set SATA to AHCI mode [ 0.556665] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.556854] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.557151] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.557339] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.557745] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.557911] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.558244] pci 0000:00:12.2: supports D1 D2 [ 0.558347] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.558658] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.558871] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.559253] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.559445] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.559887] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.560102] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.560442] pci 0000:00:13.2: supports D1 D2 [ 0.560544] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.560829] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.561308] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.561495] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.561622] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.561749] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.561877] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.562004] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.562164] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.562274] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.562447] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.562557] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.562857] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.563358] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.563614] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.563741] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.563878] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.564159] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.564354] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.564753] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.565111] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.565431] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.565749] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.566073] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.566387] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.566860] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.567051] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.567228] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.567365] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.567732] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.570915] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.571257] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.571453] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.571616] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.571748] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.572195] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.574911] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.575109] pci_bus 0000:03: extended config space not accessible [ 0.575312] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.575532] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.575667] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.575800] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.576027] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.576462] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.576621] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.576766] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.576870] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.577021] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.577194] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.577396] pci_bus 0000:00: on NUMA node 0 [ 0.577938] xen: registering gsi 13 triggering 1 polarity 0 [ 0.578372] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.578588] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.578777] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.578935] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.579109] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.579283] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.579456] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.579669] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.579970] xen:balloon: Initialising balloon driver [ 0.580090] iommu: Default domain type: Translated [ 0.580090] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.580229] SCSI subsystem initialized [ 0.580343] libata version 3.00 loaded. [ 0.580343] ACPI: bus type USB registered [ 0.580887] usbcore: registered new interface driver usbfs [ 0.581001] usbcore: registered new interface driver hub [ 0.581178] usbcore: registered new device driver usb [ 0.581304] pps_core: LinuxPPS API ver. 1 registered [ 0.581407] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.581557] PTP clock support registered [ 0.581682] Advanced Linux Sound Architecture Driver Initialized. [ 0.581682] NetLabel: Initializing [ 0.581682] NetLabel: domain hash size = 128 [ 0.581682] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.581703] NetLabel: unlabeled traffic allowed by default [ 0.581897] PCI: Using ACPI for IRQ routing [ 0.612075] PCI: pci_cache_line_size set to 64 bytes [ 0.612264] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.612268] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.612895] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.613011] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.613123] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.613275] vgaarb: loaded [ 0.613866] clocksource: Switched to clocksource tsc-early [ 0.614402] VFS: Disk quotas dquot_6.6.0 [ 0.614402] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.614402] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.614532] pnp: PnP ACPI init [ 0.614890] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.615152] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.615593] xen: registering gsi 8 triggering 1 polarity 0 [ 0.615830] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.616139] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.616259] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.616719] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.616862] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.616986] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.617101] system 00:05: [io 0x040b] has been reserved [ 0.617212] system 00:05: [io 0x04d6] has been reserved [ 0.617323] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.617437] system 00:05: [io 0x0c14] has been reserved [ 0.617547] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.617660] system 00:05: [io 0x0c52] has been reserved [ 0.617786] system 00:05: [io 0x0c6c] has been reserved [ 0.617906] system 00:05: [io 0x0c6f] has been reserved [ 0.618018] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.618156] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.618269] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.618383] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.618496] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.618610] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.618723] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.618836] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.618959] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.619114] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.619228] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.619370] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.619486] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.619602] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.619983] xen: registering gsi 4 triggering 1 polarity 0 [ 0.619987] Already setup the GSI :4 [ 0.620092] pnp 00:06: [dma 0 disabled] [ 0.620405] xen: registering gsi 3 triggering 1 polarity 0 [ 0.620416] pnp 00:07: [dma 0 disabled] [ 0.620640] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.621016] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.621208] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.621330] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.621448] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.621566] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.621882] pnp: PnP ACPI: found 10 devices [ 0.643635] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.643817] NET: Registered PF_INET protocol family [ 0.643992] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.644429] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.644584] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.644734] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.644916] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.645096] TCP: Hash tables configured (established 4096 bind 4096) [ 0.645253] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.645373] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.645541] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.645850] RPC: Registered named UNIX socket transport module. [ 0.645975] RPC: Registered udp transport module. [ 0.646084] RPC: Registered tcp transport module. [ 0.646205] RPC: Registered tcp-with-tls transport module. [ 0.646315] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.646971] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.647087] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.647212] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.647347] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.647485] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.647607] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.647744] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.647877] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.648002] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.648164] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.648294] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.648409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.648526] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.648656] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.648773] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.648895] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.649010] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.649122] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.649237] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.649351] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.649467] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.649586] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.649726] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.649874] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.649992] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.650254] xen: registering gsi 16 triggering 0 polarity 1 [ 0.650279] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.313057] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647334 usecs [ 1.313310] xen: registering gsi 16 triggering 0 polarity 1 [ 1.313317] Already setup the GSI :16 [ 1.337094] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23281 usecs [ 1.337325] xen: registering gsi 17 triggering 0 polarity 1 [ 1.337370] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.337539] xen: registering gsi 18 triggering 0 polarity 1 [ 1.337555] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.361056] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23017 usecs [ 1.361296] xen: registering gsi 18 triggering 0 polarity 1 [ 1.361303] Already setup the GSI :18 [ 1.386051] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24235 usecs [ 1.386323] xen: registering gsi 19 triggering 0 polarity 1 [ 1.386360] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.386574] xen: registering gsi 18 triggering 0 polarity 1 [ 1.386578] Already setup the GSI :18 [ 1.411061] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23963 usecs [ 1.411271] PCI: CLS 64 bytes, default 64 [ 1.411424] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.411541] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.411739] kvm_intel: VMX not supported by CPU 1 [ 1.411740] Unpacking initramfs... [ 1.411974] kvm_amd: SVM not supported by CPU 1 [ 1.412113] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c480aba0, max_idle_ns: 440795211062 ns [ 1.416480] clocksource: Switched to clocksource tsc [ 1.481536] Initialise system trusted keyrings [ 1.481847] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.482230] NFS: Registering the id_resolver key type [ 1.482350] Key type id_resolver registered [ 1.482450] Key type id_legacy registered [ 1.482632] 9p: Installing v9fs 9p2000 file system support [ 1.500065] Key type asymmetric registered [ 1.500172] Asymmetric key parser 'x509' registered [ 1.500302] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.500453] io scheduler mq-deadline registered [ 1.500555] io scheduler kyber registered [ 1.500972] xen: registering gsi 53 triggering 0 polarity 1 [ 1.501003] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.501265] xen: registering gsi 54 triggering 0 polarity 1 [ 1.501283] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.501605] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.501799] ACPI: button: Power Button [PWRB] [ 1.501942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.502185] ACPI: button: Power Button [PWRF] [ 1.504412] ACPI: \_PR_.P001: Found 2 idle states [ 1.504911] ACPI: \_PR_.P002: Found 2 idle states [ 1.505072] ACPI: \_PR_.P003: Found 2 idle states [ 1.505217] ACPI: \_PR_.P004: Found 2 idle states [ 1.505894] xen:xen_evtchn: Event-channel device installed [ 1.506105] xen_pciback: backend is vpci [ 1.506921] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.507387] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.508146] hpet_acpi_add: no address or irqs in _CRS [ 1.509831] Non-volatile memory driver v1.3 [ 1.512383] loop: module loaded [ 1.518824] ahci 0000:00:11.0: version 3.0 [ 1.518922] xen: registering gsi 22 triggering 0 polarity 1 [ 1.518952] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.519095] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.519245] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.519354] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.520565] scsi host0: ahci [ 1.520910] scsi host1: ahci [ 1.521243] scsi host2: ahci [ 1.521562] scsi host3: ahci [ 1.521714] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.521868] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.522037] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.522181] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.522749] tun: Universal TUN/TAP device driver, 1.6 [ 1.522963] e100: Intel(R) PRO/100 Network Driver [ 1.523066] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.523184] sky2: driver version 1.30 [ 1.523364] xen_netfront: Initialising Xen virtual ethernet driver [ 1.523709] xen: registering gsi 16 triggering 0 polarity 1 [ 1.523728] Already setup the GSI :16 [ 1.523861] xen: registering gsi 17 triggering 0 polarity 1 [ 1.523873] Already setup the GSI :17 [ 1.523901] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.523945] xen: registering gsi 19 triggering 0 polarity 1 [ 1.523949] Already setup the GSI :19 [ 1.524272] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.524480] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.577539] Freeing initrd memory: 20188K [ 1.580054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.580207] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.580347] usb usb1: Product: OHCI PCI host controller [ 1.580451] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.580558] usb usb1: SerialNumber: 0000:00:12.0 [ 1.580997] hub 1-0:1.0: USB hub found [ 1.581137] hub 1-0:1.0: 3 ports detected [ 1.581568] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.581633] xen: registering gsi 16 triggering 0 polarity 1 [ 1.581682] Already setup the GSI :16 [ 1.581863] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.582016] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.582188] ehci-pci 0000:00:13.2: debug port 1 [ 1.582394] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.588768] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.589046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.589225] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.589365] usb usb2: Product: EHCI Host Controller [ 1.589469] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.589575] usb usb2: SerialNumber: 0000:00:13.2 [ 1.589861] hub 2-0:1.0: USB hub found [ 1.589972] hub 2-0:1.0: 6 ports detected [ 1.649016] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.649236] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.649381] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.649546] ehci-pci 0000:00:12.2: debug port 1 [ 1.649759] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.656762] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.657081] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.657234] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.657374] usb usb3: Product: EHCI Host Controller [ 1.657477] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.657610] usb usb3: SerialNumber: 0000:00:12.2 [ 1.657939] hub 3-0:1.0: USB hub found [ 1.658070] hub 3-0:1.0: 6 ports detected [ 1.709791] hub 1-0:1.0: USB hub found [ 1.709907] hub 1-0:1.0: 3 ports detected [ 1.710292] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.710530] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.710710] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.767002] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.767154] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.767294] usb usb4: Product: OHCI PCI host controller [ 1.767397] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.767504] usb usb4: SerialNumber: 0000:00:12.1 [ 1.767875] hub 4-0:1.0: USB hub found [ 1.768043] hub 4-0:1.0: 3 ports detected [ 1.768520] xen: registering gsi 18 triggering 0 polarity 1 [ 1.768525] Already setup the GSI :18 [ 1.768680] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.768911] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.769111] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.824994] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.825146] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.825286] usb usb5: Product: OHCI PCI host controller [ 1.825390] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.825497] usb usb5: SerialNumber: 0000:00:13.0 [ 1.825837] hub 5-0:1.0: USB hub found [ 1.826007] hub 5-0:1.0: 3 ports detected [ 1.826487] xen: registering gsi 18 triggering 0 polarity 1 [ 1.826493] Already setup the GSI :18 [ 1.826628] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.826830] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.827003] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.829713] ata4: SATA link down (SStatus 0 SControl 300) [ 1.829942] ata3: SATA link down (SStatus 0 SControl 300) [ 1.882987] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.883139] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.883278] usb usb6: Product: OHCI PCI host controller [ 1.883381] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.883488] usb usb6: SerialNumber: 0000:00:13.1 [ 1.883820] hub 6-0:1.0: USB hub found [ 1.883955] hub 6-0:1.0: 3 ports detected [ 1.884416] xen: registering gsi 18 triggering 0 polarity 1 [ 1.884421] Already setup the GSI :18 [ 1.884555] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.884745] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.884937] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.940978] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.941194] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.941334] usb usb7: Product: OHCI PCI host controller [ 1.941438] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.941544] usb usb7: SerialNumber: 0000:00:14.5 [ 1.941850] hub 7-0:1.0: USB hub found [ 1.941985] hub 7-0:1.0: 2 ports detected [ 1.942433] usbcore: registered new interface driver usblp [ 1.942566] usbcore: registered new interface driver usb-storage [ 1.942713] i8042: PNP: No PS/2 controller found. [ 1.942836] i8042: Probing ports directly. [ 1.945801] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.945935] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.946330] rtc_cmos 00:02: RTC can wake from S4 [ 1.946875] rtc_cmos 00:02: registered as rtc0 [ 1.947025] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.947203] device-mapper: uevent: version 1.0.3 [ 1.947440] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.947593] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.947763] hid: raw HID events driver (C) Jiri Kosina [ 1.948122] usbcore: registered new interface driver usbhid [ 1.948227] usbhid: USB HID core driver [ 1.948765] Initializing XFRM netlink socket [ 1.948884] NET: Registered PF_INET6 protocol family [ 1.949496] Segment Routing with IPv6 [ 1.949626] In-situ OAM (IOAM) with IPv6 [ 1.949806] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.950080] NET: Registered PF_PACKET protocol family [ 1.950214] 9pnet: Installing 9P2000 support [ 1.950335] Key type dns_resolver registered [ 1.950450] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.951041] IPI shorthand broadcast: enabled [ 1.955605] sched_clock: Marking stable (1924003525, 30715255)->(1960194523, -5475743) [ 1.956067] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.956401] registered taskstats version 1 [ 1.956502] Loading compiled-in X.509 certificates [ 1.958633] PM: Magic number: 4:457:829 [ 1.958799] printk: legacy console [netcon0] enabled [ 1.958903] netconsole: network logging started [ 1.959101] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.969837] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.970228] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.970441] ALSA device list: [ 1.970538] No soundcards found. [ 1.971375] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.983799] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.983937] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.984599] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 1.985186] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.985402] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.985850] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.986178] ata2.00: configured for UDMA/133 [ 1.987422] ata1.00: configured for UDMA/133 [ 1.987739] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.988373] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.988418] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.988666] sd 0:0:0:0: [sda] Write Protect is off [ 1.988798] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.988826] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 1.988848] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.989247] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.989523] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.989831] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.990015] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.990146] sd 1:0:0:0: [sdb] Write Protect is off [ 1.990260] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.990288] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.990473] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.007330] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.017040] sdb: sdb1 sdb2 < sdb5 > [ 2.017414] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.018973] Freeing unused kernel image (initmem) memory: 2664K [ 2.019089] Write protecting the kernel read-only data: 22528k [ 2.029050] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.140243] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.140428] Run /init as init process [ 2.140537] with arguments: [ 2.140539] /init [ 2.140540] placeholder [ 2.140542] with environment: [ 2.140543] HOME=/ [ 2.140545] TERM=linux [ 2.191745] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.354886] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.355048] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.355177] usb 6-2: Product: Hermon USB hidmouse Device [ 2.355282] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.361271] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.361809] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.365379] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.411500] e1000e: Intel(R) PRO/1000 Network Driver [ 2.411628] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.411875] xen: registering gsi 48 triggering 0 polarity 1 [ 2.411918] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.412151] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.418484] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.459527] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.505893] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.506048] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.506238] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.506469] xen: registering gsi 47 triggering 0 polarity 1 [ 2.506502] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.506734] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.553821] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.557748] random: crng init done [ 2.601485] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.601640] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.601851] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.603884] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.605414] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 3.294631] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.302299] EXT4-fs (dm-0): mounted filesystem 219ee21f-99b7-4022-bd8b-a6c241fbca51 ro with ordered data mode. Quota mode: none. [ 6.964919] EXT4-fs (dm-0): re-mounted 219ee21f-99b7-4022-bd8b-a6c241fbca51 r/w. Quota mode: none. [ 7.938741] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 7.947663] EXT4-fs (sdb1): mounted filesystem ca344f7d-9b9a-4813-b653-c3bd6323d51f r/w with ordered data mode. Quota mode: none. [ 8.058290] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.765676] xenbr0: port 1(enx002590aee92a) entered blocking state [ 9.765864] xenbr0: port 1(enx002590aee92a) entered disabled state [ 9.765984] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 9.766142] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.003783] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.004319] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.004439] xenbr0: port 1(enx002590aee92a) entered forwarding state