[ 0.000000] Linux version 5.4.274 (osstest@himrod2) (gcc version 12.2.0 (Debian 12.2.0-14)) #1 SMP Tue Apr 23 13:06:25 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/fiano0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] Xen: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] Xen: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] Xen: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000493] tsc: Detected 1799.998 MHz processor [ 0.007641] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.007649] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.007658] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.007664] Disabled [ 0.007667] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.007695] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.007816] check: Scanning 1 areas for low memory corruption [ 0.007842] Kernel/User page tables isolation: disabled on XEN PV. [ 0.340422] RAMDISK: [mem 0x04000000-0x05c09fff] [ 0.340443] ACPI: Early table checksum verification disabled [ 0.347025] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.347051] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.347108] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.347187] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.347213] ACPI: FACS 0x000000007E1D8080 000040 [ 0.347239] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.347264] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.347290] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.347316] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.347342] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.347367] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.347393] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.347419] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.347444] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.347470] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.347496] ACPI: RMAD 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.347522] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.347537] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.347540] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.347542] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.347543] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.347545] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.347546] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.347548] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.347549] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.347550] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.347552] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.347553] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.347554] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.347556] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.347557] ACPI: Reserving RMAD table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.347558] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.347667] ACPI: Local APIC address 0xfee00000 [ 0.347671] Setting APIC routing to Xen PV. [ 0.348206] Zone ranges: [ 0.348208] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.348211] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.348213] Normal empty [ 0.348214] Movable zone start for each node [ 0.348215] Early memory node ranges [ 0.348217] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.348219] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.348613] Zeroed struct page in unavailable ranges: 32769 pages [ 0.348617] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.348619] On node 0 totalpages: 131071 [ 0.348621] DMA zone: 64 pages used for memmap [ 0.348622] DMA zone: 21 pages reserved [ 0.348623] DMA zone: 3993 pages, LIFO batch:0 [ 0.348752] DMA32 zone: 1986 pages used for memmap [ 0.348753] DMA32 zone: 127078 pages, LIFO batch:31 [ 0.352512] p2m virtual area at (____ptrval____), size is 40000000 [ 0.663542] Remapped 102 page(s) [ 0.666052] ACPI: PM-Timer IO Port: 0x408 [ 0.666066] ACPI: Local APIC address 0xfee00000 [ 0.666132] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.666134] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.666136] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.666138] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.666182] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.666204] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.666222] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.666226] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.666235] ACPI: IRQ0 used by override. [ 0.666237] ACPI: IRQ9 used by override. [ 0.666253] Using ACPI (MADT) for SMP configuration information [ 0.666262] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.666276] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.666306] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.666308] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.666309] PM: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.666312] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.666319] Booting paravirtualized kernel on Xen [ 0.666320] Xen version: 4.19-unstable (preserve-AD) [ 0.666325] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.810200] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.810592] percpu: Embedded 56 pages/cpu s192088 r8192 d29096 u524288 [ 0.810599] pcpu-alloc: s192088 r8192 d29096 u524288 alloc=1*2097152 [ 0.810601] pcpu-alloc: [0] 0 1 2 3 [ 0.810698] xen: PV spinlocks enabled [ 0.810704] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.810709] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.810711] Kernel command line: placeholder root=/dev/mapper/fiano0--vg-root ro console=hvc0 [ 0.810832] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.810871] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.812012] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.871013] software IO TLB: mapped [mem 0x1b180000-0x1f180000] (64MB) [ 0.873377] Memory: 386788K/524284K available (14341K kernel code, 1299K rwdata, 2920K rodata, 1452K init, 1224K bss, 137496K reserved, 0K cma-reserved) [ 0.873746] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.875973] rcu: Hierarchical RCU implementation. [ 0.875975] rcu: RCU event tracing is enabled. [ 0.875977] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.875979] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.875980] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.879100] NR_IRQS: 4352, nr_irqs: 864, preallocated irqs: 16 [ 0.879307] xen:events: Using FIFO-based ABI [ 0.879346] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.879360] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.879372] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.879385] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.879398] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.879410] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.879423] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.879436] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.879451] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.879464] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.879477] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.879489] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.879502] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.879515] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.879528] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.879553] random: crng init done [ 0.884400] Console: colour VGA+ 80x25 [ 0.898514] printk: console [tty0] enabled [ 0.900245] printk: console [hvc0] enabled [ 0.900419] ACPI: Core revision 20190816 [ 0.990321] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.990506] Xen: using vcpuop timer interface [ 0.990519] installing Xen timer for CPU 0 [ 0.990704] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f227af07c, max_idle_ns: 440795246167 ns [ 0.990878] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.99 BogoMIPS (lpj=1799998) [ 0.991271] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.991404] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 0.991549] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.991889] Spectre V2 : Mitigation: Retpolines [ 0.992019] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.992179] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.992314] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.992453] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.992615] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.992755] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.992889] MDS: Mitigation: Clear CPU buffers [ 0.993019] MMIO Stale Data: Unknown: No mitigations [ 0.993203] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.993362] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.993497] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.993634] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.993769] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.994186] Freeing SMP alternatives memory: 36K [ 0.996394] pid_max: default: 32768 minimum: 301 [ 0.996553] LSM: Security Framework initializing [ 0.996697] SELinux: Initializing. [ 0.996849] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.996887] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.997702] cpu 0 spinlock event irq 49 [ 0.997839] VPMU disabled by hypervisor. [ 0.998199] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only. [ 0.998507] rcu: Hierarchical SRCU implementation. [ 0.998955] smp: Bringing up secondary CPUs ... [ 0.999330] installing Xen timer for CPU 1 [ 0.999953] cpu 1 spinlock event irq 59 [ 1.001110] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 1.001569] installing Xen timer for CPU 2 [ 1.002371] cpu 2 spinlock event irq 65 [ 1.002886] installing Xen timer for CPU 3 [ 1.003485] cpu 3 spinlock event irq 71 [ 1.003987] smp: Brought up 1 node, 4 CPUs [ 1.004121] smpboot: Max logical packages: 1 [ 1.004347] devtmpfs: initialized [ 1.004347] x86/mm: Memory block size: 128MB [ 1.005132] PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.005132] PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.006022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.006196] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.006486] PM: RTC time: 14:43:11, date: 2024-04-23 [ 1.006782] NET: Registered protocol family 16 [ 1.006912] xen:grant_table: Grant tables using version 1 layout [ 1.007131] Grant table initialized [ 1.007431] audit: initializing netlink subsys (disabled) [ 1.007588] audit: type=2000 audit(1713883392.628:1): state=initialized audit_enabled=0 res=1 [ 1.007980] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.008151] ACPI: bus type PCI registered [ 1.008481] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.008651] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.243232] PCI: Using configuration type 1 for base access [ 1.249954] ACPI: Added _OSI(Module Device) [ 1.250094] ACPI: Added _OSI(Processor Device) [ 1.250226] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.250358] ACPI: Added _OSI(Processor Aggregator Device) [ 1.250492] ACPI: Added _OSI(Linux-Dell-Video) [ 1.250492] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.250492] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.432703] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.448757] xen: registering gsi 9 triggering 0 polarity 0 [ 1.453645] ACPI: Interpreter enabled [ 1.453803] ACPI: (supports S0 S1 S4 S5) [ 1.453887] ACPI: Using IOAPIC for interrupt routing [ 1.454072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.454789] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.477247] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.477398] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.477817] acpi PNP0A08:00: _OSC: platform does not support [PME AER LTR] [ 1.478118] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 1.478259] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.478638] PCI host bridge to bus 0000:00 [ 1.478775] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.478886] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.479033] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.479173] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.479312] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.479473] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.479634] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.479794] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.479885] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.480052] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.480259] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.480927] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.481362] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.482160] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.482658] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.483461] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.484000] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.484468] pci 0000:00:03.0: enabling Extended Tags [ 1.484970] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.485497] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.485785] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.486700] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.486985] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.487940] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.488218] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.489178] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.489456] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.490417] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.490694] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 1.491649] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 1.491932] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 1.492886] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 1.493164] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 1.494119] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 1.494396] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 1.495337] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 1.496191] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 1.497054] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 1.497294] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 1.498317] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 1.499137] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 1.499663] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 1.499972] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 1.500608] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.501003] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 1.501305] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 1.501941] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 1.502409] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 1.502688] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 1.503410] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.503828] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 1.504537] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.504798] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.504895] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.505266] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 1.506061] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.506317] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 1.506459] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 1.506875] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 1.507029] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 1.507747] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.508141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.508946] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 1.509941] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 1.510225] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 1.510414] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 1.510601] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 1.510789] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 1.510939] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 1.511128] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 1.511613] pci 0000:00:1f.2: PME# supported from D3hot [ 1.512008] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 1.512284] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 1.512586] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 1.513056] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 1.513352] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 1.514311] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.514738] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.515171] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.515660] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 1.515949] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 1.516198] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 1.516414] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 1.516708] pci 0000:04:00.0: enabling Extended Tags [ 1.517304] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 1.517468] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 1.518310] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.518461] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.518646] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.519127] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 1.519409] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 1.519677] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.519875] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 1.520673] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 1.521315] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.521466] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.521618] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.522100] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 1.522379] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 1.522647] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 1.522846] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 1.523544] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.524179] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.524330] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.524483] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.524779] pci_bus 0000:07: extended config space not accessible [ 1.524961] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 1.525202] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 1.525397] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 1.525590] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 1.526481] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 1.526652] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.526821] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.526886] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.527053] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.527218] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 1.527388] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.527555] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.527729] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 1.527885] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 1.528052] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 1.528217] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 1.534207] pci_bus 0000:00: on NUMA node 0 [ 1.534341] xen: registering gsi 13 triggering 1 polarity 0 [ 1.535087] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 1.535233] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.535427] acpi PNP0A03:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 1.535589] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.535830] PCI host bridge to bus 0000:ff [ 1.535887] pci_bus 0000:ff: root bus resource [bus ff] [ 1.536116] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 1.536761] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 1.537388] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 1.537990] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 1.538571] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 1.539160] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 1.539800] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 1.540342] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 1.540956] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 1.541541] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 1.542167] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 1.542745] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 1.543373] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 1.543961] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 1.544619] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 1.545396] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 1.546168] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 1.546938] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 1.547715] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 1.548494] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 1.549304] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 1.550082] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 1.550850] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 1.551517] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 1.552296] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 1.553068] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 1.553839] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 1.554517] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 1.555284] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 1.555863] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 1.556344] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 1.556925] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 1.557546] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 1.558130] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 1.558709] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 1.559372] pci_bus 0000:ff: on NUMA node 0 [ 1.559554] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.559808] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.560004] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.560251] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.560496] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 1.560763] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 1.560992] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 1.561263] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 1.563154] xen:balloon: Initialising balloon driver [ 1.563315] iommu: Default domain type: Translated [ 1.563924] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 1.564065] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.564065] pci 0000:07:01.0: vgaarb: bridge control possible [ 1.564065] vgaarb: loaded [ 1.564257] SCSI subsystem initialized [ 1.564919] libata version 3.00 loaded. [ 1.564936] ACPI: bus type USB registered [ 1.565090] usbcore: registered new interface driver usbfs [ 1.565235] usbcore: registered new interface driver hub [ 1.565235] usbcore: registered new device driver usb [ 1.565235] pps_core: LinuxPPS API ver. 1 registered [ 1.565235] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.565354] PTP clock support registered [ 1.565911] EDAC MC: Ver: 3.0.0 [ 1.566943] Advanced Linux Sound Architecture Driver Initialized. [ 1.567099] PCI: Using ACPI for IRQ routing [ 1.624825] PCI: pci_cache_line_size set to 64 bytes [ 1.625841] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 1.625843] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 1.625993] NetLabel: Initializing [ 1.626126] NetLabel: domain hash size = 128 [ 1.626257] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.626413] NetLabel: unlabeled traffic allowed by default [ 1.628924] clocksource: Switched to clocksource tsc-early [ 1.793945] VFS: Disk quotas dquot_6.6.0 [ 1.794101] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.794270] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.794452] pnp: PnP ACPI init [ 1.794699] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.794844] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.795005] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 1.795153] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 1.795305] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.795437] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 1.795588] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.795610] xen: registering gsi 8 triggering 1 polarity 0 [ 1.795645] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.795743] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.795907] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 1.796053] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.796154] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.796212] xen: registering gsi 12 triggering 1 polarity 0 [ 1.796252] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 1.796445] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 1.796593] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.796934] xen: registering gsi 4 triggering 1 polarity 0 [ 1.796939] Already setup the GSI :4 [ 1.797072] pnp 00:07: [dma 0 disabled] [ 1.797127] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.797433] xen: registering gsi 3 triggering 1 polarity 0 [ 1.797448] pnp 00:08: [dma 0 disabled] [ 1.797500] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.797910] system 00:09: [io 0x0400-0x0453] has been reserved [ 1.798052] system 00:09: [io 0x0458-0x047f] has been reserved [ 1.798190] system 00:09: [io 0x1180-0x119f] has been reserved [ 1.798328] system 00:09: [io 0x0500-0x057f] has been reserved [ 1.798466] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.798605] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.798745] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 1.798907] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.799020] system 00:0a: [io 0x0454-0x0457] has been reserved [ 1.799168] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.799553] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.799701] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.799978] pnp: PnP ACPI: found 12 devices [ 1.805339] thermal_sys: Registered thermal governor 'step_wise' [ 1.805340] thermal_sys: Registered thermal governor 'user_space' [ 1.844667] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.844986] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.845190] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.845392] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.845594] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.845737] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.845932] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.846127] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.846268] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.846434] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.846620] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.846766] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.846943] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.847129] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 1.847286] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.847440] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.847634] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.847775] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.847927] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.848065] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.848202] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.848340] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.848478] pci_bus 0000:00: resource 10 [mem 0xfed08000-0xfed08fff window] [ 1.848617] pci_bus 0000:00: resource 11 [mem 0xfed0e000-0xfed0ffff window] [ 1.848756] pci_bus 0000:00: resource 12 [mem 0x80000000-0xfbffffff window] [ 1.848910] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.849044] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.849210] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 1.849344] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.849481] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 1.849615] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.849753] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 1.849905] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.850065] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 1.850202] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 1.850339] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 1.850480] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 1.850621] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.850759] pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.850912] pci_bus 0000:07: resource 10 [mem 0xfed08000-0xfed08fff window] [ 1.851052] pci_bus 0000:07: resource 11 [mem 0xfed0e000-0xfed0ffff window] [ 1.851191] pci_bus 0000:07: resource 12 [mem 0x80000000-0xfbffffff window] [ 1.851418] NET: Registered protocol family 2 [ 1.851595] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.852004] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.852175] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.852345] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.852498] TCP: Hash tables configured (established 4096 bind 4096) [ 1.852664] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.852807] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.853012] NET: Registered protocol family 1 [ 1.853582] RPC: Registered named UNIX socket transport module. [ 1.853723] RPC: Registered udp transport module. [ 1.853855] RPC: Registered tcp transport module. [ 1.854007] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.854468] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 1.854833] xen: registering gsi 16 triggering 0 polarity 1 [ 1.854900] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.872053] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x690 took 16924 usecs [ 1.872377] xen: registering gsi 23 triggering 0 polarity 1 [ 1.872404] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.889045] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x690 took 16358 usecs [ 1.889374] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.889855] PCI: CLS 64 bytes, default 64 [ 1.890059] Unpacking initramfs... [ 2.384886] Freeing initrd memory: 28712K [ 2.385178] kvm: no hardware support [ 2.385310] has_svm: not amd or hygon [ 2.390946] kvm: no hardware support [ 2.392493] check: Scanning for low memory corruption every 60 seconds [ 2.393043] Initialise system trusted keyrings [ 2.393431] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 2.395577] NFS: Registering the id_resolver key type [ 2.395722] Key type id_resolver registered [ 2.395851] Key type id_legacy registered [ 2.403551] Key type asymmetric registered [ 2.403690] Asymmetric key parser 'x509' registered [ 2.403833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.403995] io scheduler mq-deadline registered [ 2.404127] io scheduler kyber registered [ 2.404717] xen: registering gsi 26 triggering 0 polarity 1 [ 2.404754] xen: --> pirq=26 -> irq=26 (gsi=26) [ 2.405534] xen: registering gsi 26 triggering 0 polarity 1 [ 2.405540] Already setup the GSI :26 [ 2.406410] xen: registering gsi 40 triggering 0 polarity 1 [ 2.406435] xen: --> pirq=40 -> irq=40 (gsi=40) [ 2.407150] xen: registering gsi 16 triggering 0 polarity 1 [ 2.407155] Already setup the GSI :16 [ 2.407661] xen: registering gsi 17 triggering 0 polarity 1 [ 2.407687] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.408058] xen: registering gsi 16 triggering 0 polarity 1 [ 2.408063] Already setup the GSI :16 [ 2.408651] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.408880] ACPI: Power Button [PWRB] [ 2.409064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.409279] ACPI: Power Button [PWRF] [ 2.409650] Monitor-Mwait will be used to enter C-1 state [ 2.409661] Monitor-Mwait will be used to enter C-2 state [ 2.416863] xen:xen_evtchn: Event-channel device installed [ 2.417110] xen_pciback: backend is vpci [ 2.418112] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.440286] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.441178] hpet_acpi_add: no address or irqs in _CRS [ 2.441451] Non-volatile memory driver v1.3 [ 2.441654] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 2.441793] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 2.444611] loop: module loaded [ 2.449810] ahci 0000:00:1f.2: version 3.0 [ 2.449930] xen: registering gsi 18 triggering 0 polarity 1 [ 2.449961] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.460302] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.460490] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 2.476091] scsi host0: ahci [ 2.476584] scsi host1: ahci [ 2.477097] scsi host2: ahci [ 2.477613] scsi host3: ahci [ 2.478061] scsi host4: ahci [ 2.478468] scsi host5: ahci [ 2.478706] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 75 [ 2.478872] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 75 [ 2.479033] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 75 [ 2.479194] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 75 [ 2.479381] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 75 [ 2.479542] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 75 [ 2.479996] tun: Universal TUN/TAP device driver, 1.6 [ 2.480224] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.480396] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.480563] sky2: driver version 1.30 [ 2.480781] xen_netfront: Initialising Xen virtual ethernet driver [ 2.481073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.481215] ehci-pci: EHCI PCI platform driver [ 2.481525] xen: registering gsi 16 triggering 0 polarity 1 [ 2.481531] Already setup the GSI :16 [ 2.481763] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.481988] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.482198] ehci-pci 0000:00:1a.0: debug port 2 [ 2.486337] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.486552] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 2.493400] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.493652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.493859] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.494019] usb usb1: Product: EHCI Host Controller [ 2.494152] usb usb1: Manufacturer: Linux 5.4.274 ehci_hcd [ 2.494286] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.494678] hub 1-0:1.0: USB hub found [ 2.494825] hub 1-0:1.0: 2 ports detected [ 2.495293] xen: registering gsi 23 triggering 0 polarity 1 [ 2.495299] Already setup the GSI :23 [ 2.495536] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.495808] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.496018] ehci-pci 0000:00:1d.0: debug port 2 [ 2.500131] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.500325] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 2.507420] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.507706] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.507872] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.508033] usb usb2: Product: EHCI Host Controller [ 2.508166] usb usb2: Manufacturer: Linux 5.4.274 ehci_hcd [ 2.508299] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.508684] hub 2-0:1.0: USB hub found [ 2.508831] hub 2-0:1.0: 2 ports detected [ 2.509195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.509367] ohci-pci: OHCI PCI platform driver [ 2.509521] uhci_hcd: USB Universal Host Controller Interface driver [ 2.509716] usbcore: registered new interface driver usblp [ 2.509869] usbcore: registered new interface driver usb-storage [ 2.510049] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 2.510188] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 2.513697] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.513837] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.514428] rtc_cmos 00:02: RTC can wake from S4 [ 2.515140] rtc_cmos 00:02: registered as rtc0 [ 2.515297] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.515594] xen: registering gsi 18 triggering 0 polarity 1 [ 2.515600] Already setup the GSI :18 [ 2.515875] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.516159] device-mapper: uevent: version 1.0.3 [ 2.516427] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 2.516606] intel_pstate: CPU model not supported [ 2.516757] hidraw: raw HID events driver (C) Jiri Kosina [ 2.517052] usbcore: registered new interface driver usbhid [ 2.517188] usbhid: USB HID core driver [ 2.518288] Initializing XFRM netlink socket [ 2.518586] NET: Registered protocol family 10 [ 2.519114] Segment Routing with IPv6 [ 2.519710] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.520007] NET: Registered protocol family 17 [ 2.520163] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.520387] Key type dns_resolver registered [ 2.520872] IPI shorthand broadcast: enabled [ 2.521028] sched_clock: Marking stable (2409489611, 111338097)->(2693531453, -172703745) [ 2.521658] registered taskstats version 1 [ 2.521792] Loading compiled-in X.509 certificates [ 2.522184] PM: Magic number: 4:884:738 [ 2.522380] pci 0000:ff:0d.0: hash matches [ 2.522523] acpi LNXCPU:67: hash matches [ 2.522662] acpi LNXCPU:3a: hash matches [ 2.522831] printk: console [netcon0] enabled [ 2.522968] netconsole: network logging started [ 2.523320] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.542144] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.542632] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.542804] ALSA device list: [ 2.542931] No soundcards found. [ 2.543171] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.543373] cfg80211: failed to load regulatory.db [ 2.736435] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.744432] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.789242] ata2: SATA link down (SStatus 0 SControl 300) [ 2.789430] ata6: SATA link down (SStatus 0 SControl 300) [ 2.789598] ata3: SATA link down (SStatus 0 SControl 300) [ 2.789761] ata5: SATA link down (SStatus 0 SControl 300) [ 2.789926] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.790083] ata4: SATA link down (SStatus 0 SControl 300) [ 2.791992] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.792141] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.794125] ata1.00: configured for UDMA/133 [ 2.794506] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.794999] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.795299] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.795535] sd 0:0:0:0: [sda] Write Protect is off [ 2.795674] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.795763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.817861] sda: sda1 sda2 < sda5 > [ 2.818987] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.820797] Freeing unused kernel image memory: 1452K [ 2.827470] Write protecting the kernel read-only data: 20480k [ 2.857883] Freeing unused kernel image memory: 2024K [ 2.859492] Freeing unused kernel image memory: 1176K [ 2.859629] Run /init as init process [ 2.871766] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.871935] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.872428] hub 1-1:1.0: USB hub found [ 2.872634] hub 1-1:1.0: 6 ports detected [ 2.873773] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.873940] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.874421] hub 2-1:1.0: USB hub found [ 2.880269] hub 2-1:1.0: 8 ports detected [ 3.142372] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 3.222010] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 3.222181] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.222407] usb 1-1.1: Product: Hermon USB hidmouse Device [ 3.222543] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 3.224304] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input5 [ 3.224734] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 3.226152] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input6 [ 3.278752] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 3.454401] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f227af07c, max_idle_ns: 440795246167 ns [ 3.454665] clocksource: Switched to clocksource tsc [ 3.568634] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.568787] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.569130] xen: registering gsi 16 triggering 0 polarity 1 [ 3.569138] Already setup the GSI :16 [ 3.569756] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.571625] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 3.571827] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 3.621132] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 3.664663] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 3.664840] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.665067] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.665395] xen: registering gsi 17 triggering 0 polarity 1 [ 3.665403] Already setup the GSI :17 [ 3.666037] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.713473] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 3.758609] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 3.758794] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.759077] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.762826] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 3.785183] isci 0000:04:00.0: OEM parameter table found in OROM [ 3.785399] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 3.785639] xen: registering gsi 16 triggering 0 polarity 1 [ 3.785645] Already setup the GSI :16 [ 3.789566] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 3.790978] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 3.792084] scsi host6: isci [ 4.281222] PM: Image not found (code -22) [ 4.653975] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.659604] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 9.605849] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 10.722776] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 10.764760] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 10.896428] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 12.740682] xenbr0: port 1(enx0cc47a13338c) entered blocking state [ 12.740851] xenbr0: port 1(enx0cc47a13338c) entered disabled state [ 12.741045] device enx0cc47a13338c entered promiscuous mode [ 15.970450] e1000e: enx0cc47a13338c NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 15.971014] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready [ 15.971208] xenbr0: port 1(enx0cc47a13338c) entered blocking state [ 15.971375] xenbr0: port 1(enx0cc47a13338c) entered forwarding state [ 15.971619] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready