[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-20-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.970 MHz processor [ 0.000895] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001050] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001699] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001708] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018731] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018757] Using GB pages for direct mapping [ 0.019095] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019103] ACPI: Early table checksum verification disabled [ 0.019108] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019114] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019123] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019131] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019137] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019141] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019146] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019151] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019156] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019162] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019166] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019172] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019178] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019183] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019188] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019193] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019198] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019202] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019204] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019206] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019207] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019208] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019210] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019211] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019212] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019214] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019215] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019217] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019218] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019219] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019221] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019222] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019291] No NUMA configuration found [ 0.019292] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019308] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019842] Zone ranges: [ 0.019843] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019846] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019848] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019850] Device empty [ 0.019852] Movable zone start for each node [ 0.019856] Early memory node ranges [ 0.019857] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019859] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019861] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019865] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019872] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019928] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028051] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028346] ACPI: PM-Timer IO Port: 0x408 [ 0.028358] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028361] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028362] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028363] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028375] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028381] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028385] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028389] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028395] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028397] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028404] TSC deadline timer available [ 0.028406] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028427] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028430] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028431] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028433] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028434] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028436] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028438] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028439] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028440] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028441] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028443] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028444] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028445] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028446] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028447] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028449] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028451] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028453] Booting paravirtualized kernel on bare hardware [ 0.028456] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035818] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036212] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036221] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036225] pcpu-alloc: [0] 0 1 2 3 [ 0.036264] Fallback order for Node 0: 0 [ 0.036269] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036271] Policy zone: Normal [ 0.036273] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036343] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64", will be passed to user space. [ 0.036373] random: crng init done [ 0.037428] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037999] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038087] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038100] software IO TLB: area num 4. [ 0.080109] Memory: 2087172K/8353556K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2800K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080323] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080344] Kernel/User page tables isolation: enabled [ 0.080397] ftrace: allocating 40211 entries in 158 pages [ 0.090770] ftrace: allocated 158 pages with 5 groups [ 0.091714] Dynamic Preempt: voluntary [ 0.091757] rcu: Preemptible hierarchical RCU implementation. [ 0.091758] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091761] Trampoline variant of Tasks RCU enabled. [ 0.091761] Rude variant of Tasks RCU enabled. [ 0.091762] Tracing variant of Tasks RCU enabled. [ 0.091763] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091764] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.099187] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099394] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103948] Console: colour VGA+ 80x25 [ 1.028351] printk: console [ttyS0] enabled [ 1.032557] ACPI: Core revision 20220331 [ 1.037209] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046346] APIC: Switch to symmetric I/O mode setup [ 1.051329] DMAR: Host address width 46 [ 1.055177] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060504] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068425] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074691] DMAR: ATSR flags: 0x0 [ 1.078002] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.084270] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090630] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096983] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102381] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111518] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116918] x2apic enabled [ 1.119647] Switched APIC routing to cluster x2apic. [ 1.125156] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150347] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f20d3927a, max_idle_ns: 440795241380 ns [ 1.160866] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.94 BogoMIPS (lpj=7199880) [ 1.164896] CPU0: Thermal monitoring enabled (TM1) [ 1.168948] process: using mwait in idle threads [ 1.172865] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176863] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180866] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184864] Spectre V2 : Mitigation: Retpolines [ 1.188863] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192863] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196863] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200864] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204864] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208864] MDS: Mitigation: Clear CPU buffers [ 1.212863] MMIO Stale Data: Unknown: No mitigations [ 1.216868] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220863] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224863] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228863] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232863] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261435] Freeing SMP alternatives memory: 36K [ 1.264863] pid_max: default: 32768 minimum: 301 [ 1.268897] LSM: Security Framework initializing [ 1.272882] landlock: Up and running. [ 1.276863] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280893] AppArmor: AppArmor initialized [ 1.284864] TOMOYO Linux initialized [ 1.288869] LSM support for eBPF active [ 1.292909] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296879] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.305425] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.309052] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312864] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316894] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320863] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324887] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328863] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332884] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336864] ... version: 3 [ 1.340863] ... bit width: 48 [ 1.344863] ... generic registers: 8 [ 1.348863] ... value mask: 0000ffffffffffff [ 1.352863] ... max period: 00007fffffffffff [ 1.356863] ... fixed-purpose events: 3 [ 1.360863] ... event mask: 00000007000000ff [ 1.365096] signal: max sigframe size: 1776 [ 1.368887] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372896] rcu: Hierarchical SRCU implementation. [ 1.376863] rcu: Max phase no-delay instances is 1000. [ 1.381541] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384957] smp: Bringing up secondary CPUs ... [ 1.389013] x86: Booting SMP configuration: [ 1.392868] .... node #0, CPUs: #1 #2 #3 [ 1.408016] smp: Brought up 1 node, 4 CPUs [ 1.412864] smpboot: Max logical packages: 1 [ 1.416863] smpboot: Total of 4 processors activated (14399.76 BogoMIPS) [ 1.440900] node 0 deferred pages initialised in 20ms [ 1.445304] devtmpfs: initialized [ 1.448944] x86/mm: Memory block size: 128MB [ 1.453913] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456915] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.461020] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464876] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468925] pinctrl core: initialized pinctrl subsystem [ 1.473759] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.477141] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.481015] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.485016] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488873] audit: initializing netlink subsys (disabled) [ 1.492878] audit: type=2000 audit(1713910385.404:1): state=initialized audit_enabled=0 res=1 [ 1.493014] thermal_sys: Registered thermal governor 'fair_share' [ 1.496866] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500863] thermal_sys: Registered thermal governor 'step_wise' [ 1.504863] thermal_sys: Registered thermal governor 'user_space' [ 1.508863] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512881] cpuidle: using governor ladder [ 1.520868] cpuidle: using governor menu [ 1.524837] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524865] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528966] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532866] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536873] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.541323] PCI: Using configuration type 1 for base access [ 1.544961] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.550198] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552909] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556866] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564866] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572864] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.578733] ACPI: Added _OSI(Module Device) [ 1.580866] ACPI: Added _OSI(Processor Device) [ 1.584864] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592864] ACPI: Added _OSI(Processor Aggregator Device) [ 1.721372] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.750467] ACPI: Interpreter enabled [ 1.752886] ACPI: PM: (supports S0 S1 S4 S5) [ 1.756864] ACPI: Using IOAPIC for interrupt routing [ 1.764971] HEST: Table parsing has been initialized. [ 1.768988] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.772867] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.784863] PCI: Using E820 reservations for host bridge windows [ 1.789417] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.796974] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.800867] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.804872] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.805110] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.808862] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.820960] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.829024] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.836864] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.845227] PCI host bridge to bus 0000:00 [ 1.848866] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.856864] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.864863] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.868863] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.876864] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.884863] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.892863] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.900863] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.908864] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.912894] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.916946] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.924988] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.932963] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.937032] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.944962] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.949032] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.956902] pci 0000:00:03.0: enabling Extended Tags [ 1.960928] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.969018] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.972881] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.981010] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.984880] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.993001] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 2.000880] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 2.004998] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.012880] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.017000] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.024879] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.032998] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.036880] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.044999] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.048882] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.056999] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.064879] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.068997] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.076993] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.080988] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.088875] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.097014] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.100984] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.109006] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.112882] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.120932] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.124953] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.132881] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.140931] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.144967] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.152880] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.156954] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.164969] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.168963] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.176897] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.180865] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.188977] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.192964] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.200890] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.204865] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.212980] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.216880] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.224955] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.228967] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.237014] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.241080] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.248877] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.252870] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.260870] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.264870] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.272870] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.276870] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.280908] pci 0000:00:1f.2: PME# supported from D3hot [ 2.288954] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.292881] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.300887] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.304940] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.312884] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.321026] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.324915] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.328914] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.332947] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.340886] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.348878] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.356872] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.360889] pci 0000:04:00.0: enabling Extended Tags [ 2.364969] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.372864] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.385119] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.388866] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.392871] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.400962] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.408899] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.416900] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.420882] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.425052] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.433085] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.436866] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.444866] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.452964] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.456899] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.464900] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.468882] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.477049] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.481079] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.484866] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.492866] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.500886] pci_bus 0000:07: extended config space not accessible [ 2.504889] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.512879] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.516872] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.524872] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.532910] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.540975] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.544868] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.552870] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.560864] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.568863] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.576863] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.584863] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.596863] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.604863] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.612863] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.620863] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.633667] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.636868] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.648883] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.656864] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.664932] PCI host bridge to bus 0000:ff [ 2.668865] pci_bus 0000:ff: root bus resource [bus ff] [ 2.672877] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.680943] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.684933] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.692924] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.696923] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.704927] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.712930] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.716921] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.724922] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.728922] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.736924] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.740921] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.748925] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.752927] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.760940] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.764952] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.772947] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.776947] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.784946] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.788946] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.796949] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.800948] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.808955] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.812948] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.820947] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.824947] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.832952] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.836946] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.844946] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.848923] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.856929] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.860924] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.868926] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.876923] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.880921] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.889085] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.892918] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.900916] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.904915] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.912933] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.916916] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.924916] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.928915] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.938554] iommu: Default domain type: Translated [ 2.940864] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.948954] pps_core: LinuxPPS API ver. 1 registered [ 2.952864] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.960866] PTP clock support registered [ 2.964802] EDAC MC: Ver: 3.0.0 [ 2.969127] NetLabel: Initializing [ 2.972528] NetLabel: domain hash size = 128 [ 2.976865] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.984886] NetLabel: unlabeled traffic allowed by default [ 2.988863] PCI: Using ACPI for IRQ routing [ 2.999855] PCI: pci_cache_line_size set to 64 bytes [ 2.999982] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.999985] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 3.000906] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 3.004862] pci 0000:07:01.0: vgaarb: bridge control possible [ 3.004862] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.020871] vgaarb: loaded [ 3.025398] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.032864] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.040862] clocksource: Switched to clocksource tsc-early [ 3.046552] VFS: Disk quotas dquot_6.6.0 [ 3.050503] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.057578] AppArmor: AppArmor Filesystem Enabled [ 3.062317] pnp: PnP ACPI init [ 3.065528] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.072144] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.078755] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.085366] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.092109] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.099214] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.105139] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.112421] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.118549] pnp 00:07: [dma 0 disabled] [ 3.118794] pnp 00:08: [dma 0 disabled] [ 3.119079] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.125004] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.130919] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.136838] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.142759] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.149372] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.156331] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.163049] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.169247] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.176486] pnp: PnP ACPI: found 12 devices [ 3.187195] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.196164] NET: Registered PF_INET protocol family [ 3.201226] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.211553] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.220124] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.227961] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.236268] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.244058] TCP: Hash tables configured (established 65536 bind 65536) [ 3.250684] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.258236] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.265065] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.272352] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.278023] NET: Registered PF_XDP protocol family [ 3.282836] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.287808] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.292783] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.297758] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.302724] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.308825] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.316573] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.321539] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.327635] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.334424] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.339394] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.345489] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.352279] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.357250] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.364034] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.371776] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.377960] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.384138] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.390319] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.396497] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.403372] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.410243] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.417203] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.424164] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.429736] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.436954] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.442527] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.448794] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.454367] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.460634] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.466898] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.474120] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.480298] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.486476] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.492657] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.498835] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.505710] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.512581] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.519542] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.526596] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.557551] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23328 usecs [ 3.589540] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23992 usecs [ 3.597049] PCI: CLS 64 bytes, default 64 [ 3.601099] DMAR: No SATC found [ 3.601142] Trying to unpack rootfs image as initramfs... [ 3.604243] DMAR: dmar0: Using Queued invalidation [ 3.604322] pci 0000:00:00.0: Adding to iommu group 0 [ 3.619552] pci 0000:00:01.0: Adding to iommu group 1 [ 3.624635] pci 0000:00:01.1: Adding to iommu group 2 [ 3.629720] pci 0000:00:03.0: Adding to iommu group 3 [ 3.634807] pci 0000:00:04.0: Adding to iommu group 4 [ 3.639890] pci 0000:00:04.1: Adding to iommu group 5 [ 3.644973] pci 0000:00:04.2: Adding to iommu group 6 [ 3.650050] pci 0000:00:04.3: Adding to iommu group 7 [ 3.655127] pci 0000:00:04.4: Adding to iommu group 8 [ 3.660205] pci 0000:00:04.5: Adding to iommu group 9 [ 3.665286] pci 0000:00:04.6: Adding to iommu group 10 [ 3.670450] pci 0000:00:04.7: Adding to iommu group 11 [ 3.675615] pci 0000:00:05.0: Adding to iommu group 12 [ 3.680782] pci 0000:00:05.2: Adding to iommu group 13 [ 3.685951] pci 0000:00:05.4: Adding to iommu group 14 [ 3.691120] pci 0000:00:11.0: Adding to iommu group 15 [ 3.696311] pci 0000:00:16.0: Adding to iommu group 16 [ 3.701478] pci 0000:00:16.1: Adding to iommu group 16 [ 3.706654] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.711825] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.716995] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.722166] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.727333] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.732541] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.737706] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.742871] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.748035] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.753212] pci 0000:04:00.0: Adding to iommu group 23 [ 3.758379] pci 0000:05:00.0: Adding to iommu group 24 [ 3.763550] pci 0000:06:00.0: Adding to iommu group 25 [ 3.768697] pci 0000:07:01.0: Adding to iommu group 21 [ 3.773881] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.779060] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.784273] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.789444] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.794612] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.799786] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.804977] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.810147] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.815343] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.820513] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.825713] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.830886] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.836081] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.841256] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.846425] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.851590] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.856753] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.861923] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.867096] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.872259] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.877427] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.882592] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.887757] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.892923] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.898086] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.903265] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.908442] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.913606] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.918821] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.924000] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.929172] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.934347] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.939551] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.944730] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.949908] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.958966] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.965417] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.971860] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.980347] Initialise system trusted keyrings [ 3.984813] Key type blacklist registered [ 3.988913] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.997216] zbud: loaded [ 4.000079] integrity: Platform Keyring initialized [ 4.004967] integrity: Machine keyring initialized [ 4.009758] Key type asymmetric registered [ 4.013856] Asymmetric key parser 'x509' registered [ 4.044580] Freeing initrd memory: 39592K [ 4.056012] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.061797] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.069230] io scheduler mq-deadline registered [ 4.076205] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.083026] Monitor-Mwait will be used to enter C-1 state [ 4.083041] Monitor-Mwait will be used to enter C-2 state [ 4.083048] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.093163] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.100661] pstore: Registered erst as persistent store backend [ 4.106750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.113181] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.121290] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.129530] Linux agpgart interface v0.103 [ 4.133759] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.142927] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.149809] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.159671] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.164640] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.169889] mousedev: PS/2 mouse device common for all mice [ 4.175501] rtc_cmos 00:02: RTC can wake from S4 [ 4.180422] rtc_cmos 00:02: registered as rtc0 [ 4.184908] rtc_cmos 00:02: setting system clock to 2024-04-23T22:13:10 UTC (1713910390) [ 4.193035] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.200857] intel_pstate: Intel P-state driver initializing [ 4.206707] ledtrig-cpu: registered to indicate activity on CPUs [ 4.230632] NET: Registered PF_INET6 protocol family [ 4.244639] Segment Routing with IPv6 [ 4.248333] In-situ OAM (IOAM) with IPv6 [ 4.252300] mip6: Mobile IPv6 [ 4.255277] NET: Registered PF_PACKET protocol family [ 4.260412] mpls_gso: MPLS GSO support [ 4.264662] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.270209] microcode: Microcode Update Driver: v2.2. [ 4.270216] IPI shorthand broadcast: enabled [ 4.279571] sched_clock: Marking stable (3290102930, 989434461)->(4647427605, -367890214) [ 4.288010] registered taskstats version 1 [ 4.292122] Loading compiled-in X.509 certificates [ 4.336953] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.345687] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.356321] zswap: loaded using pool lzo/zbud [ 4.360908] Key type .fscrypt registered [ 4.364834] Key type fscrypt-provisioning registered [ 4.370104] pstore: Using crash dump compression: deflate [ 4.382580] Key type encrypted registered [ 4.386604] AppArmor: AppArmor sha1 policy hashing enabled [ 4.392101] ima: No TPM chip found, activating TPM-bypass! [ 4.397582] ima: Allocated hash algorithm: sha256 [ 4.402300] ima: No architecture policies found [ 4.406843] evm: Initialising EVM extended attributes: [ 4.411978] evm: security.selinux [ 4.415295] evm: security.SMACK64 (disabled) [ 4.419568] evm: security.SMACK64EXEC (disabled) [ 4.424188] evm: security.SMACK64TRANSMUTE (disabled) [ 4.429242] evm: security.SMACK64MMAP (disabled) [ 4.433862] evm: security.apparmor [ 4.437265] evm: security.ima [ 4.440231] evm: security.capability [ 4.443810] evm: HMAC attrs: 0x1 [ 4.628211] Freeing unused decrypted memory: 2036K [ 4.633664] Freeing unused kernel image (initmem) memory: 2800K [ 4.639666] Write protecting the kernel read-only data: 26624k [ 4.646185] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.653153] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 4.745746] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.752187] x86/mm: Checking user space page tables [ 4.831456] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.837899] Run /init as init process [ 4.841569] with arguments: [ 4.841571] /init [ 4.841572] with environment: [ 4.841573] HOME=/ [ 4.841574] TERM=linux [ 4.841576] BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 [ 4.993451] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999691] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.010033] clocksource: Switched to clocksource tsc [ 5.063133] SCSI subsystem initialized [ 5.071291] e1000e: Intel(R) PRO/1000 Network Driver [ 5.076263] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.082440] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.104793] libata version 3.00 loaded. [ 5.107001] ACPI: bus type USB registered [ 5.107007] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.111062] usbcore: registered new interface driver usbfs [ 5.122383] usbcore: registered new interface driver hub [ 5.127716] usbcore: registered new device driver usb [ 5.135124] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.140801] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.154250] ahci 0000:00:1f.2: version 3.0 [ 5.158056] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.163293] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.170713] ehci-pci 0000:00:1a.0: debug port 2 [ 5.173762] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.182889] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.191069] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.195003] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.209347] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.215924] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.221450] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.228161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.236943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.241788] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.244185] usb usb1: Product: EHCI Host Controller [ 5.244427] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.244434] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.252092] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.252230] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.254997] scsi host0: isci [ 5.256967] usb usb1: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.262530] scsi host1: ahci [ 5.262887] scsi host2: ahci [ 5.263053] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.263181] scsi host3: ahci [ 5.263472] scsi host4: ahci [ 5.263731] scsi host5: ahci [ 5.264019] scsi host6: ahci [ 5.264091] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.264095] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.264097] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.264099] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.264102] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.264105] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.270540] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.277672] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.286136] hub 1-0:1.0: USB hub found [ 5.347619] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.348474] hub 1-0:1.0: 2 ports detected [ 5.392813] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.398055] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.405467] ehci-pci 0000:00:1d.0: debug port 2 [ 5.414003] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.414675] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.427585] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.433484] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.434548] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.440269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.455167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.462385] usb usb2: Product: EHCI Host Controller [ 5.467264] usb usb2: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.473357] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.478176] hub 2-0:1.0: USB hub found [ 5.481942] hub 2-0:1.0: 2 ports detected [ 5.576201] ata2: SATA link down (SStatus 0 SControl 300) [ 5.581641] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.587866] ata4: SATA link down (SStatus 0 SControl 300) [ 5.593295] ata5: SATA link down (SStatus 0 SControl 300) [ 5.598714] ata3: SATA link down (SStatus 0 SControl 300) [ 5.604175] ata6: SATA link down (SStatus 0 SControl 300) [ 5.609656] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.616841] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.626114] ata1.00: configured for UDMA/133 [ 5.649504] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.689748] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.700064] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.725013] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.732701] sd 1:0:0:0: [sda] Write Protect is off [ 5.737520] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.737542] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.737953] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.746611] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.753471] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.780252] sda: sda1 sda2 < sda5 > [ 5.784060] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.809786] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.817986] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.825477] hub 1-1:1.0: USB hub found [ 5.829311] hub 1-1:1.0: 6 ports detected [ 5.925790] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.933979] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.941515] hub 2-1:1.0: USB hub found [ 5.945480] hub 2-1:1.0: 8 ports detected [ 6.110438] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.122683] device-mapper: uevent: version 1.0.3 [ 6.127403] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.135849] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.251770] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.260139] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.267450] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.272936] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.292497] hid: raw HID events driver (C) Jiri Kosina [ 6.305365] usbcore: registered new interface driver usbhid [ 6.310974] usbhid: USB HID core driver [ 6.318299] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.333182] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.348136] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.421768] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.603646] PM: Image not found (code -22) [ 7.025067] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.036580] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.250577] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.107640] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.129322] dca service started, version 1.12.1 [ 9.134191] ACPI: button: Power Button [PWRB] [ 9.138683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.146154] ACPI: button: Power Button [PWRF] [ 9.174697] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.231374] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 9.430450] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.526565] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.544918] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.552913] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.558695] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.564395] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.587701] ACPI: bus type drm_connector registered [ 9.587727] IPMI message handler: version 39.2 [ 9.587801] iTCO_vendor_support: vendor-support=0 [ 9.603482] ipmi device interface [ 9.697587] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.718133] ipmi_si: IPMI System Interface driver [ 9.722935] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.729325] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.729825] cryptd: max_cpu_qlen set to 1000 [ 9.736553] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.736768] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.752739] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.808871] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.817595] ipmi_si: Adding ACPI-specified kcs state machine [ 9.823366] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.902284] AVX version of gcm_enc/dec engaged. [ 9.906921] AES CTR mode by8 optimization enabled [ 9.912273] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.923269] Console: switching to colour dummy device 80x25 [ 9.934686] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.943883] fbcon: mgag200drmfb (fb0) is primary device [ 9.969636] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.019862] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.059209] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.090720] ipmi_ssif: IPMI SSIF Interface driver [ 10.315407] Console: switching to colour frame buffer device 128x48 [ 10.424173] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.849871] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.849899] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.849906] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.849914] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.849923] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.849927] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.849935] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.849939] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.849947] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.849951] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.849959] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.849963] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.849971] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.849975] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.849983] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.849987] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.849994] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.850002] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.850009] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.850017] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.850025] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.850032] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.850040] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.850048] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.850058] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.850060] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.850069] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.850071] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.850081] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.850218] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.861298] EDAC sbridge: Ver: 1.1.2 [ 10.997281] intel_rapl_common: Found RAPL domain package [ 11.002622] intel_rapl_common: Found RAPL domain core [ 11.007777] intel_rapl_common: Found RAPL domain dram [ 11.951786] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 12.915249] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 12.934173] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.991146] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.635784] audit: type=1400 audit(1713910399.824:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 13.651170] audit: type=1400 audit(1713910399.828:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 13.667057] audit: type=1400 audit(1713910399.828:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 13.699327] audit: type=1400 audit(1713910399.888:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 13.714663] audit: type=1400 audit(1713910399.888:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 13.729602] audit: type=1400 audit(1713910399.892:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 13.858356] audit: type=1400 audit(1713910400.048:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1075 comm="apparmor_parser" [ 13.941106] audit: type=1400 audit(1713910400.128:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 13.959141] audit: type=1400 audit(1713910400.132:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 13.977978] audit: type=1400 audit(1713910400.132:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.054533] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.064461] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready