[ 0.000000] Linux version 6.9.0-rc5+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 00:59:00 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000010] Xen PV: Detected 4 vCPUS [ 0.038440] tsc: Fast TSC calibration using PIT [ 0.038442] tsc: Detected 2800.059 MHz processor [ 0.038443] tsc: Detected 2800.000 MHz TSC [ 0.038652] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.038656] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.038663] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.038666] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.038668] MTRRs set to read-only [ 0.038671] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.064519] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.064529] ACPI: Early table checksum verification disabled [ 0.065272] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.065317] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.065343] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.065376] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.065386] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.065397] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065406] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065416] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065426] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065437] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065447] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065456] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.065466] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.065476] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.065486] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.065497] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.065507] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.065512] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.065515] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.065516] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065517] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065519] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.065520] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.065521] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.065523] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.065524] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.065525] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.065526] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.065528] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.065529] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.065530] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.065618] APIC: Switched APIC routing to: Xen PV [ 0.067939] Zone ranges: [ 0.067940] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067943] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.067945] Normal empty [ 0.067946] Movable zone start for each node [ 0.067947] Early memory node ranges [ 0.067948] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.067950] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.067952] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.067959] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068018] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.070341] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.070348] p2m virtual area at (____ptrval____), size is 40000000 [ 0.290287] Remapped 102 page(s) [ 0.290794] ACPI: PM-Timer IO Port: 0x808 [ 0.290816] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.290839] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.290842] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.290862] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.290869] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.290879] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.290883] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.290901] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.290905] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.290916] CPU topo: Max. logical packages: 1 [ 0.290917] CPU topo: Max. logical dies: 1 [ 0.290918] CPU topo: Max. dies per package: 1 [ 0.290924] CPU topo: Max. threads per core: 1 [ 0.290925] CPU topo: Num. cores per package: 4 [ 0.290926] CPU topo: Num. threads per package: 4 [ 0.290927] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.290928] CPU topo: Rejected CPUs 4 [ 0.290944] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.290947] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.290948] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.290951] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.290955] Booting kernel on Xen [ 0.290956] Xen version: 4.19-unstable (preserve-AD) [ 0.290959] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.297181] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.297744] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u524288 [ 0.297751] pcpu-alloc: s194344 r8192 d30936 u524288 alloc=1*2097152 [ 0.297755] pcpu-alloc: [0] 0 1 2 3 [ 0.297811] xen: PV spinlocks enabled [ 0.297814] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.297818] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.297875] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.297997] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298056] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.298240] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.298244] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.298246] software IO TLB: area num 4. [ 0.367425] Memory: 388496K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135536K reserved, 0K cma-reserved) [ 0.367534] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.370001] Dynamic Preempt: voluntary [ 0.370102] rcu: Preemptible hierarchical RCU implementation. [ 0.370103] rcu: RCU event tracing is enabled. [ 0.370104] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.370106] Trampoline variant of Tasks RCU enabled. [ 0.370107] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.370108] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.370119] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.376874] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.377001] xen:events: Using FIFO-based ABI [ 0.377024] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.377034] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.377040] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.377045] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.377051] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.377056] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.377061] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.377067] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.377072] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.377077] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.377082] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.377088] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.377093] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.377098] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.377103] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.377113] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.383227] Console: colour VGA+ 80x25 [ 0.383231] printk: legacy console [tty0] enabled [ 0.396734] printk: legacy console [hvc0] enabled [ 0.400700] ACPI: Core revision 20230628 [ 0.405922] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.406345] Xen: using vcpuop timer interface [ 0.406374] installing Xen timer for CPU 0 [ 0.407402] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 0.407794] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.00 BogoMIPS (lpj=2800000) [ 0.409390] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.410059] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.410373] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.410712] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.410810] Spectre V2 : Mitigation: Retpolines [ 0.411096] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.411448] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.411770] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.412072] RETBleed: Mitigation: untrained return thunk [ 0.412369] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.412750] Speculative Store Bypass: Vulnerable [ 0.412882] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.413225] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.413401] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.413511] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.413618] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.434871] Freeing SMP alternatives memory: 40K [ 0.434991] pid_max: default: 32768 minimum: 301 [ 0.435122] LSM: initializing lsm=capability,selinux [ 0.435231] SELinux: Initializing. [ 0.435362] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.435530] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.436908] cpu 0 spinlock event irq 57 [ 0.437019] VPMU disabled by hypervisor. [ 0.437481] Performance Events: PMU not available due to virtualization, using software events only. [ 0.437650] signal: max sigframe size: 1776 [ 0.437805] rcu: Hierarchical SRCU implementation. [ 0.438785] rcu: Max phase no-delay instances is 400. [ 0.444277] smp: Bringing up secondary CPUs ... [ 0.444567] installing Xen timer for CPU 1 [ 0.444959] installing Xen timer for CPU 2 [ 0.445343] installing Xen timer for CPU 3 [ 0.031664] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.445535] cpu 1 spinlock event irq 77 [ 0.031664] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.445824] cpu 2 spinlock event irq 78 [ 0.031664] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.446065] cpu 3 spinlock event irq 79 [ 0.446927] smp: Brought up 1 node, 4 CPUs [ 0.447231] devtmpfs: initialized [ 0.447231] x86/mm: Memory block size: 128MB [ 0.448206] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.448206] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.448206] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.448876] PM: RTC time: 02:14:26, date: 2024-04-24 [ 0.449178] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.449317] xen:grant_table: Grant tables using version 1 layout [ 0.449440] Grant table initialized [ 0.449770] audit: initializing netlink subsys (disabled) [ 0.449824] audit: type=2000 audit(1713924867.029:1): state=initialized audit_enabled=0 res=1 [ 0.449895] thermal_sys: Registered thermal governor 'step_wise' [ 0.449895] thermal_sys: Registered thermal governor 'user_space' [ 0.450040] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.450957] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.528998] PCI: Using configuration type 1 for base access [ 0.529175] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.529806] ACPI: Added _OSI(Module Device) [ 0.529909] ACPI: Added _OSI(Processor Device) [ 0.530015] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.530117] ACPI: Added _OSI(Processor Aggregator Device) [ 0.534889] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.535418] xen: registering gsi 9 triggering 0 polarity 1 [ 0.537800] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.538259] ACPI: Interpreter enabled [ 0.538381] ACPI: PM: (supports S0 S1 S4 S5) [ 0.538482] ACPI: Using IOAPIC for interrupt routing [ 0.538626] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.538773] PCI: Using E820 reservations for host bridge windows [ 0.539012] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.549723] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.549789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.549964] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.550075] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.550246] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.550704] PCI host bridge to bus 0000:00 [ 0.550785] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.550897] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.551008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.551166] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.551327] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.551470] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.551623] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.552152] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.552698] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.552855] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.552972] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.553086] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.553248] pci 0000:00:09.0: enabling Extended Tags [ 0.553473] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.553775] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.553995] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.554112] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.554225] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.554389] pci 0000:00:0a.0: enabling Extended Tags [ 0.554609] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.554942] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.555128] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.555262] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.555394] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.555521] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.555648] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.555775] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.555866] pci 0000:00:11.0: set SATA to AHCI mode [ 0.556183] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.556374] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.556795] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.556981] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.557416] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.557603] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.557973] pci 0000:00:12.2: supports D1 D2 [ 0.558074] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.558345] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.558532] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.558912] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.559098] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.559530] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.559717] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.560008] pci 0000:00:13.2: supports D1 D2 [ 0.560109] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.560395] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.560942] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.561128] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.561260] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.561387] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.561513] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.561640] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.561800] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.561938] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.562068] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.562178] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.562480] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.562969] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.563222] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.563366] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.563486] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.563763] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.563828] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.564227] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.564574] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.564897] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.565211] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.565559] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.565868] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.566344] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.566536] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.566718] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.566812] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.567185] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.570830] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.571123] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.571404] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.571587] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.571719] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.572048] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.575831] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.575996] pci_bus 0000:03: extended config space not accessible [ 0.576186] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.576443] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.576580] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.576713] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.576921] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.577356] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.577521] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.577668] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.579786] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.579966] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.580156] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.580372] pci_bus 0000:00: on NUMA node 0 [ 0.580836] xen: registering gsi 13 triggering 1 polarity 0 [ 0.581280] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.581469] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.581644] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.581820] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.581998] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.582171] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.582345] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.582518] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.582729] xen:balloon: Initialising balloon driver [ 0.582865] iommu: Default domain type: Translated [ 0.582970] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.583148] SCSI subsystem initialized [ 0.583802] libata version 3.00 loaded. [ 0.583832] ACPI: bus type USB registered [ 0.583953] usbcore: registered new interface driver usbfs [ 0.584066] usbcore: registered new interface driver hub [ 0.584066] usbcore: registered new device driver usb [ 0.584066] pps_core: LinuxPPS API ver. 1 registered [ 0.584066] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.584204] PTP clock support registered [ 0.584825] Advanced Linux Sound Architecture Driver Initialized. [ 0.584855] NetLabel: Initializing [ 0.584958] NetLabel: domain hash size = 128 [ 0.585076] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.585199] NetLabel: unlabeled traffic allowed by default [ 0.585794] PCI: Using ACPI for IRQ routing [ 0.611919] PCI: pci_cache_line_size set to 64 bytes [ 0.612082] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.612085] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.612109] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.612109] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.612109] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.612172] vgaarb: loaded [ 0.614819] clocksource: Switched to clocksource tsc-early [ 0.615022] VFS: Disk quotas dquot_6.6.0 [ 0.615141] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.615278] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.615443] pnp: PnP ACPI init [ 0.615752] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.616016] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.616423] xen: registering gsi 8 triggering 1 polarity 0 [ 0.616624] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.616921] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.617036] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.617457] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.617567] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.617675] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.617795] system 00:05: [io 0x040b] has been reserved [ 0.617909] system 00:05: [io 0x04d6] has been reserved [ 0.618015] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.618122] system 00:05: [io 0x0c14] has been reserved [ 0.618227] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.618334] system 00:05: [io 0x0c52] has been reserved [ 0.618440] system 00:05: [io 0x0c6c] has been reserved [ 0.618546] system 00:05: [io 0x0c6f] has been reserved [ 0.618681] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.618799] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.618908] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.619043] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.619150] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.619257] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.619364] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.619471] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.619578] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.619686] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.619804] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.619912] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.620028] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.620138] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.620508] xen: registering gsi 4 triggering 1 polarity 0 [ 0.620512] Already setup the GSI :4 [ 0.620611] pnp 00:06: [dma 0 disabled] [ 0.620907] xen: registering gsi 3 triggering 1 polarity 0 [ 0.620918] pnp 00:07: [dma 0 disabled] [ 0.621066] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.621402] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.621597] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.621710] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.621835] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.621947] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.622203] pnp: PnP ACPI: found 10 devices [ 0.641257] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.641415] NET: Registered PF_INET protocol family [ 0.641569] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.641975] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.642123] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.642317] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.642465] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.642626] TCP: Hash tables configured (established 4096 bind 4096) [ 0.642757] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.642900] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.643077] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.643354] RPC: Registered named UNIX socket transport module. [ 0.643490] RPC: Registered udp transport module. [ 0.643597] RPC: Registered tcp transport module. [ 0.643698] RPC: Registered tcp-with-tls transport module. [ 0.643814] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.644307] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.644418] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.644536] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.644663] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.644810] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.644966] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.645093] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.645207] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.645324] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.645477] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.645586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.645695] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.645817] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.645953] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.646064] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.646169] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.646282] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.646418] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.646527] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.646634] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.646744] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.646861] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.646970] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.647080] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.647204] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.647455] xen: registering gsi 16 triggering 0 polarity 1 [ 0.647478] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.309934] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647014 usecs [ 1.310161] xen: registering gsi 16 triggering 0 polarity 1 [ 1.310167] Already setup the GSI :16 [ 1.332933] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 22293 usecs [ 1.333162] xen: registering gsi 17 triggering 0 polarity 1 [ 1.333207] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.333378] xen: registering gsi 18 triggering 0 polarity 1 [ 1.333394] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.355931] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 22075 usecs [ 1.356155] xen: registering gsi 18 triggering 0 polarity 1 [ 1.356162] Already setup the GSI :18 [ 1.378939] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 22303 usecs [ 1.379170] xen: registering gsi 19 triggering 0 polarity 1 [ 1.379207] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.379397] xen: registering gsi 18 triggering 0 polarity 1 [ 1.379401] Already setup the GSI :18 [ 1.402936] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23039 usecs [ 1.403144] PCI: CLS 64 bytes, default 64 [ 1.403255] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.403385] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.403572] kvm_intel: VMX not supported by CPU 2 [ 1.403675] kvm_amd: SVM not supported by CPU 2 [ 1.403779] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 1.405221] clocksource: Switched to clocksource tsc [ 1.405358] Unpacking initramfs... [ 1.488386] Initialise system trusted keyrings [ 1.488633] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.488947] NFS: Registering the id_resolver key type [ 1.489059] Key type id_resolver registered [ 1.489159] Key type id_legacy registered [ 1.489329] 9p: Installing v9fs 9p2000 file system support [ 1.506850] Key type asymmetric registered [ 1.506953] Asymmetric key parser 'x509' registered [ 1.507072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.507249] io scheduler mq-deadline registered [ 1.507351] io scheduler kyber registered [ 1.507728] xen: registering gsi 53 triggering 0 polarity 1 [ 1.507757] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.508022] xen: registering gsi 54 triggering 0 polarity 1 [ 1.508038] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.508398] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.508575] ACPI: button: Power Button [PWRB] [ 1.508729] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.508928] ACPI: button: Power Button [PWRF] [ 1.511188] ACPI: \_PR_.P001: Found 2 idle states [ 1.511409] ACPI: \_PR_.P002: Found 2 idle states [ 1.511569] ACPI: \_PR_.P003: Found 2 idle states [ 1.511744] ACPI: \_PR_.P004: Found 2 idle states [ 1.512355] xen:xen_evtchn: Event-channel device installed [ 1.512572] xen_pciback: backend is vpci [ 1.513357] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.513771] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.514555] hpet_acpi_add: no address or irqs in _CRS [ 1.516309] Non-volatile memory driver v1.3 [ 1.518608] loop: module loaded [ 1.525031] ahci 0000:00:11.0: version 3.0 [ 1.525139] xen: registering gsi 22 triggering 0 polarity 1 [ 1.525169] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.525314] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.525478] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.525587] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.526844] scsi host0: ahci [ 1.527200] scsi host1: ahci [ 1.527568] scsi host2: ahci [ 1.527932] scsi host3: ahci [ 1.528098] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.528250] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.528403] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.528568] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.529146] tun: Universal TUN/TAP device driver, 1.6 [ 1.529380] e100: Intel(R) PRO/100 Network Driver [ 1.529488] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.529614] sky2: driver version 1.30 [ 1.529802] xen_netfront: Initialising Xen virtual ethernet driver [ 1.530171] xen: registering gsi 16 triggering 0 polarity 1 [ 1.530178] Already setup the GSI :16 [ 1.530242] xen: registering gsi 17 triggering 0 polarity 1 [ 1.530288] Already setup the GSI :17 [ 1.530344] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.530623] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.530721] xen: registering gsi 19 triggering 0 polarity 1 [ 1.530775] Already setup the GSI :19 [ 1.530881] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.554565] Freeing initrd memory: 20188K [ 1.586905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.587058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587198] usb usb1: Product: OHCI PCI host controller [ 1.587306] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.587445] usb usb1: SerialNumber: 0000:00:12.0 [ 1.587773] hub 1-0:1.0: USB hub found [ 1.587885] hub 1-0:1.0: 3 ports detected [ 1.588316] xen: registering gsi 16 triggering 0 polarity 1 [ 1.588322] Already setup the GSI :16 [ 1.588445] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.588764] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.588913] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.589108] ehci-pci 0000:00:12.2: debug port 1 [ 1.589332] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.595796] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.596003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.596156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.596321] usb usb2: Product: EHCI Host Controller [ 1.596424] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.596530] usb usb2: SerialNumber: 0000:00:12.2 [ 1.596854] hub 2-0:1.0: USB hub found [ 1.596966] hub 2-0:1.0: 6 ports detected [ 1.648743] hub 1-0:1.0: USB hub found [ 1.648875] hub 1-0:1.0: 3 ports detected [ 1.649134] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.649337] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.649482] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.649647] ehci-pci 0000:00:13.2: debug port 1 [ 1.649896] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.656769] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.657025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.657178] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.657317] usb usb3: Product: EHCI Host Controller [ 1.657447] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.657553] usb usb3: SerialNumber: 0000:00:13.2 [ 1.657879] hub 3-0:1.0: USB hub found [ 1.657988] hub 3-0:1.0: 6 ports detected [ 1.658334] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.658570] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.658781] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.714925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.715077] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.715217] usb usb4: Product: OHCI PCI host controller [ 1.715321] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.715426] usb usb4: SerialNumber: 0000:00:12.1 [ 1.715698] hub 4-0:1.0: USB hub found [ 1.715825] hub 4-0:1.0: 3 ports detected [ 1.716211] xen: registering gsi 18 triggering 0 polarity 1 [ 1.716216] Already setup the GSI :18 [ 1.716354] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.716545] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.716754] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.772857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.773010] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.773188] usb usb5: Product: OHCI PCI host controller [ 1.773291] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.773423] usb usb5: SerialNumber: 0000:00:13.0 [ 1.773693] hub 5-0:1.0: USB hub found [ 1.773823] hub 5-0:1.0: 3 ports detected [ 1.774201] xen: registering gsi 18 triggering 0 polarity 1 [ 1.774207] Already setup the GSI :18 [ 1.774341] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.774596] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.774802] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.830851] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.831002] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.831142] usb usb6: Product: OHCI PCI host controller [ 1.831246] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.831352] usb usb6: SerialNumber: 0000:00:13.1 [ 1.831696] hub 6-0:1.0: USB hub found [ 1.831820] hub 6-0:1.0: 3 ports detected [ 1.832159] xen: registering gsi 18 triggering 0 polarity 1 [ 1.832165] Already setup the GSI :18 [ 1.832299] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.832515] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.832695] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.838669] ata4: SATA link down (SStatus 0 SControl 300) [ 1.838843] ata3: SATA link down (SStatus 0 SControl 300) [ 1.888851] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.889003] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.889143] usb usb7: Product: OHCI PCI host controller [ 1.889246] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.889352] usb usb7: SerialNumber: 0000:00:14.5 [ 1.889723] hub 7-0:1.0: USB hub found [ 1.889835] hub 7-0:1.0: 2 ports detected [ 1.890135] usbcore: registered new interface driver usblp [ 1.890262] usbcore: registered new interface driver usb-storage [ 1.890408] i8042: PNP: No PS/2 controller found. [ 1.890511] i8042: Probing ports directly. [ 1.893533] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.893640] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.894081] rtc_cmos 00:02: RTC can wake from S4 [ 1.894631] rtc_cmos 00:02: registered as rtc0 [ 1.894788] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.894942] device-mapper: uevent: version 1.0.3 [ 1.895123] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.895314] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.895469] hid: raw HID events driver (C) Jiri Kosina [ 1.895830] usbcore: registered new interface driver usbhid [ 1.895935] usbhid: USB HID core driver [ 1.896401] Initializing XFRM netlink socket [ 1.896519] NET: Registered PF_INET6 protocol family [ 1.897270] Segment Routing with IPv6 [ 1.897386] In-situ OAM (IOAM) with IPv6 [ 1.897523] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.897835] NET: Registered PF_PACKET protocol family [ 1.897973] 9pnet: Installing 9P2000 support [ 1.898117] Key type dns_resolver registered [ 1.898233] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.898771] IPI shorthand broadcast: enabled [ 1.903353] sched_clock: Marking stable (1872005195, 30664408)->(1905996492, -3326889) [ 1.903815] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.904118] registered taskstats version 1 [ 1.904219] Loading compiled-in X.509 certificates [ 1.906384] PM: Magic number: 4:169:208 [ 1.906519] vc vcsa: hash matches [ 1.906678] printk: legacy console [netcon0] enabled [ 1.906783] netconsole: network logging started [ 1.906984] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.917264] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.917654] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.917837] ALSA device list: [ 1.917937] No soundcards found. [ 1.920242] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.992711] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.992848] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.993325] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 1.993809] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.994569] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.994740] ata2.00: configured for UDMA/133 [ 1.995175] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.997064] ata1.00: configured for UDMA/133 [ 1.997335] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.997913] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.998011] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.998235] sd 0:0:0:0: [sda] Write Protect is off [ 1.998348] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.998355] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 1.998403] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.998755] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.998884] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.998900] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.999036] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.999290] sd 1:0:0:0: [sdb] Write Protect is off [ 1.999433] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.999461] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.999664] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.020602] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.027906] sdb: sdb1 sdb2 < sdb5 > [ 2.028273] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.030371] Freeing unused kernel image (initmem) memory: 2664K [ 2.030507] Write protecting the kernel read-only data: 22528k [ 2.040218] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.144695] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.151448] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.151566] Run /init as init process [ 2.151677] with arguments: [ 2.151678] /init [ 2.151679] placeholder [ 2.151681] with environment: [ 2.151682] HOME=/ [ 2.151683] TERM=linux [ 2.309764] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.309975] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.310100] usb 6-2: Product: Hermon USB hidmouse Device [ 2.310215] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.316211] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.316569] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.320185] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.371990] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.422079] e1000e: Intel(R) PRO/1000 Network Driver [ 2.422242] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.422515] xen: registering gsi 48 triggering 0 polarity 1 [ 2.422553] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.423027] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.467552] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.514535] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.514704] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.514905] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.515169] xen: registering gsi 47 triggering 0 polarity 1 [ 2.515197] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.515390] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.562790] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.577732] random: crng init done [ 2.610818] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.610974] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.611165] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.613236] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 2.613941] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 3.298433] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.311524] EXT4-fs (dm-0): mounted filesystem 9d4e43fb-2ed4-49a7-be9a-c63b990744a8 ro with ordered data mode. Quota mode: none. [ 7.577387] EXT4-fs (dm-0): re-mounted 9d4e43fb-2ed4-49a7-be9a-c63b990744a8 r/w. Quota mode: none. [ 8.497754] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.524539] EXT4-fs (sdb1): mounted filesystem fe85fbee-5acb-4801-9caa-5d7c77b4dc7b r/w with ordered data mode. Quota mode: none. [ 8.601233] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.144378] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 10.144557] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 10.144745] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 10.144908] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 13.392715] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.393335] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 13.393453] xenbr0: port 1(enx002590aee8ac) entered forwarding state