[ 0.000000] Linux version 6.9.0-rc5+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 00:59:00 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/huxelrebe1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020062fff] usable [ 0.000000] Xen: [mem 0x00000000ca2b6000-0x00000000ca2bcfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000ca70a000-0x00000000cab93fff] reserved [ 0.000000] Xen: [mem 0x00000000da6f3000-0x00000000da784fff] reserved [ 0.000000] Xen: [mem 0x00000000da785000-0x00000000da7a8fff] ACPI data [ 0.000000] Xen: [mem 0x00000000da7a9000-0x00000000db4bbfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000db4bc000-0x00000000dbffefff] reserved [ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO ThinkServer RS140/ThinkServer RS140, BIOS FBKT75CUS 03/24/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000015] Xen PV: Detected 4 vCPUS [ 0.048533] tsc: Fast TSC calibration using PIT [ 0.048534] tsc: Detected 3192.401 MHz processor [ 0.048535] tsc: Detected 3192.606 MHz TSC [ 0.048793] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.048795] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.048800] last_pfn = 0x20063 max_arch_pfn = 0x400000000 [ 0.048802] MTRR map: 4 entries (0 fixed + 4 variable; max 20), built from 10 variable MTRRs [ 0.048803] MTRRs set to read-only [ 0.048806] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.048830] Kernel/User page tables isolation: disabled on XEN PV. [ 0.064487] RAMDISK: [mem 0x04000000-0x053a3fff] [ 0.064492] ACPI: Early table checksum verification disabled [ 0.067180] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO) [ 0.067187] ACPI: XSDT 0x00000000DA78C098 0000B4 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067213] ACPI: FACP 0x00000000DA7A3758 00010C (v05 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067248] ACPI: DSDT 0x00000000DA78C1E0 017573 (v02 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067258] ACPI: FACS 0x00000000DB4BA080 000040 [ 0.067269] ACPI: APIC 0x00000000DA7A3868 000072 (v03 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067279] ACPI: FPDT 0x00000000DA7A38E0 000044 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067289] ACPI: TCPA 0x00000000DA7A3928 000032 (v02 LENOVO TC-FB 000014B0 MSFT 01000013) [ 0.067299] ACPI: LPIT 0x00000000DA7A3960 00005C (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.067310] ACPI: SSDT 0x00000000DA7A39C0 000539 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067320] ACPI: SSDT 0x00000000DA7A3F00 000AD8 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067330] ACPI: MCFG 0x00000000DA7A49D8 00003C (v01 LENOVO TC-FB 000014B0 MSFT 00000097) [ 0.067340] ACPI: HPET 0x00000000DA7A4A18 000038 (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.067350] ACPI: SSDT 0x00000000DA7A4A50 00036D (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067361] ACPI: SSDT 0x00000000DA7A4DC0 0034E1 (v01 LENOVO TC-FB 000014B0 INTL 20091112) [ 0.067371] ACPI: ASF! 0x00000000DA7A82A8 0000A5 (v32 LENOVO TC-FB 000014B0 TFSM 000F4240) [ 0.067381] ACPI: RMAD 0x00000000DA7A8350 0000B8 (v01 LENOVO TC-FB 000014B0 INTL 00000001) [ 0.067391] ACPI: EINJ 0x00000000DA7A8408 000130 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067402] ACPI: ERST 0x00000000DA7A8538 000230 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067412] ACPI: HEST 0x00000000DA7A8768 0000A8 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067422] ACPI: BERT 0x00000000DA7A8810 000030 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067432] ACPI: BGRT 0x00000000DA7A8840 000038 (v00 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067437] ACPI: Reserving FACP table memory at [mem 0xda7a3758-0xda7a3863] [ 0.067439] ACPI: Reserving DSDT table memory at [mem 0xda78c1e0-0xda7a3752] [ 0.067439] ACPI: Reserving FACS table memory at [mem 0xdb4ba080-0xdb4ba0bf] [ 0.067440] ACPI: Reserving APIC table memory at [mem 0xda7a3868-0xda7a38d9] [ 0.067440] ACPI: Reserving FPDT table memory at [mem 0xda7a38e0-0xda7a3923] [ 0.067441] ACPI: Reserving TCPA table memory at [mem 0xda7a3928-0xda7a3959] [ 0.067442] ACPI: Reserving LPIT table memory at [mem 0xda7a3960-0xda7a39bb] [ 0.067442] ACPI: Reserving SSDT table memory at [mem 0xda7a39c0-0xda7a3ef8] [ 0.067443] ACPI: Reserving SSDT table memory at [mem 0xda7a3f00-0xda7a49d7] [ 0.067443] ACPI: Reserving MCFG table memory at [mem 0xda7a49d8-0xda7a4a13] [ 0.067444] ACPI: Reserving HPET table memory at [mem 0xda7a4a18-0xda7a4a4f] [ 0.067444] ACPI: Reserving SSDT table memory at [mem 0xda7a4a50-0xda7a4dbc] [ 0.067445] ACPI: Reserving SSDT table memory at [mem 0xda7a4dc0-0xda7a82a0] [ 0.067446] ACPI: Reserving ASF! table memory at [mem 0xda7a82a8-0xda7a834c] [ 0.067446] ACPI: Reserving RMAD table memory at [mem 0xda7a8350-0xda7a8407] [ 0.067447] ACPI: Reserving EINJ table memory at [mem 0xda7a8408-0xda7a8537] [ 0.067447] ACPI: Reserving ERST table memory at [mem 0xda7a8538-0xda7a8767] [ 0.067448] ACPI: Reserving HEST table memory at [mem 0xda7a8768-0xda7a880f] [ 0.067449] ACPI: Reserving BERT table memory at [mem 0xda7a8810-0xda7a883f] [ 0.067449] ACPI: Reserving BGRT table memory at [mem 0xda7a8840-0xda7a8877] [ 0.067514] APIC: Switched APIC routing to: Xen PV [ 0.070070] Zone ranges: [ 0.070071] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.070073] DMA32 [mem 0x0000000001000000-0x0000000020062fff] [ 0.070074] Normal empty [ 0.070075] Movable zone start for each node [ 0.070075] Early memory node ranges [ 0.070076] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.070077] node 0: [mem 0x0000000000100000-0x0000000020062fff] [ 0.070078] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020062fff] [ 0.070082] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.070108] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.071196] On node 0, zone DMA32: 32669 pages in unavailable ranges [ 0.071198] p2m virtual area at (____ptrval____), size is 40000000 [ 0.148803] Remapped 99 page(s) [ 0.149162] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ 0.149508] ACPI: PM-Timer IO Port: 0x1808 [ 0.149543] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.149565] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.149573] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.149575] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.149590] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.149593] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.149605] CPU topo: Max. logical packages: 1 [ 0.149606] CPU topo: Max. logical dies: 1 [ 0.149606] CPU topo: Max. dies per package: 1 [ 0.149610] CPU topo: Max. threads per core: 1 [ 0.149611] CPU topo: Num. cores per package: 4 [ 0.149611] CPU topo: Num. threads per package: 4 [ 0.149612] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.149622] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.149623] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.149624] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.149625] [mem 0x20063000-0xca2b5fff] available for PCI devices [ 0.149631] Booting kernel on Xen [ 0.149632] Xen version: 4.19-unstable (preserve-AD) [ 0.149634] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.154017] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.154324] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u524288 [ 0.154328] pcpu-alloc: s194344 r8192 d30936 u524288 alloc=1*2097152 [ 0.154331] pcpu-alloc: [0] 0 1 2 3 [ 0.154367] xen: PV spinlocks enabled [ 0.154369] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.154371] Kernel command line: placeholder root=/dev/mapper/huxelrebe1--vg-root ro console=hvc0 [ 0.154402] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.154416] random: crng init done [ 0.154471] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.154502] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.154956] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.154959] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.154960] software IO TLB: area num 4. [ 0.196181] Memory: 388568K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135464K reserved, 0K cma-reserved) [ 0.196285] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.198112] Dynamic Preempt: voluntary [ 0.198210] rcu: Preemptible hierarchical RCU implementation. [ 0.198211] rcu: RCU event tracing is enabled. [ 0.198211] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.198212] Trampoline variant of Tasks RCU enabled. [ 0.198213] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.198214] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.198222] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.205157] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.205256] xen:events: Using FIFO-based ABI [ 0.205281] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.205287] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.205292] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.205296] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.205301] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.205306] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.205311] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.205315] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.205320] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.205325] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.205329] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.205334] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.205339] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.205343] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.205348] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.205355] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.206939] Console: colour VGA+ 80x25 [ 0.206942] printk: legacy console [tty0] enabled [ 0.214670] printk: legacy console [hvc0] enabled [ 0.215636] ACPI: Core revision 20230628 [ 0.225184] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x92, should be 0x4D (20230628/utcksum-58) [ 0.225331] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.225417] Xen: using vcpuop timer interface [ 0.225423] installing Xen timer for CPU 0 [ 0.225513] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 0.225599] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.21 BogoMIPS (lpj=3192606) [ 0.225795] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.225880] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.225968] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.226048] Spectre V2 : Mitigation: Retpolines [ 0.226102] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.226178] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.226237] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.226297] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.226375] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.226454] MDS: Mitigation: Clear CPU buffers [ 0.226606] MMIO Stale Data: Unknown: No mitigations [ 0.226661] SRBDS: Unknown: Dependent on hypervisor status [ 0.226731] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.226807] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.226893] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.226973] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.227032] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.241533] Freeing SMP alternatives memory: 40K [ 0.241597] pid_max: default: 32768 minimum: 301 [ 0.241669] LSM: initializing lsm=capability,selinux [ 0.241728] SELinux: Initializing. [ 0.241801] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.241878] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.242684] cpu 0 spinlock event irq 25 [ 0.242742] VPMU disabled by hypervisor. [ 0.243068] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.243151] signal: max sigframe size: 1776 [ 0.243252] rcu: Hierarchical SRCU implementation. [ 0.243349] rcu: Max phase no-delay instances is 400. [ 0.243702] smp: Bringing up secondary CPUs ... [ 0.243900] installing Xen timer for CPU 1 [ 0.244203] installing Xen timer for CPU 2 [ 0.244485] installing Xen timer for CPU 3 [ 0.021241] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0002 [ 0.244641] cpu 1 spinlock event irq 45 [ 0.021241] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0004 [ 0.244778] cpu 2 spinlock event irq 46 [ 0.021241] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0006 [ 0.244778] cpu 3 spinlock event irq 47 [ 0.245799] smp: Brought up 1 node, 4 CPUs [ 0.246036] devtmpfs: initialized [ 0.246036] x86/mm: Memory block size: 128MB [ 0.246723] ACPI: PM: Registering ACPI NVS region [mem 0xca2b6000-0xca2bcfff] (28672 bytes) [ 0.246743] ACPI: PM: Registering ACPI NVS region [mem 0xda7a9000-0xdb4bbfff] (13709312 bytes) [ 0.246937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.247031] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.247205] PM: RTC time: 01:53:39, date: 2024-04-24 [ 0.247388] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247619] xen:grant_table: Grant tables using version 1 layout [ 0.247693] Grant table initialized [ 0.247844] audit: initializing netlink subsys (disabled) [ 0.247930] audit: type=2000 audit(1713923620.405:1): state=initialized audit_enabled=0 res=1 [ 0.247930] thermal_sys: Registered thermal governor 'step_wise' [ 0.247930] thermal_sys: Registered thermal governor 'user_space' [ 0.247930] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.247965] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.248603] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.270771] PCI: Using configuration type 1 for base access [ 0.270915] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.270915] ACPI: Added _OSI(Module Device) [ 0.270915] ACPI: Added _OSI(Processor Device) [ 0.270915] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.270915] ACPI: Added _OSI(Processor Aggregator Device) [ 0.284598] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.284598] xen: registering gsi 9 triggering 0 polarity 0 [ 0.285901] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.290983] ACPI: Dynamic OEM Table Load: [ 0.291102] ACPI: SSDT 0xFFFF888003596C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.292038] ACPI: Dynamic OEM Table Load: [ 0.292096] ACPI: SSDT 0xFFFF8880036D3000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.292769] ACPI: Dynamic OEM Table Load: [ 0.292826] ACPI: SSDT 0xFFFF888003564C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.293987] ACPI: _OSC evaluated successfully for all CPUs [ 0.294460] ACPI: Interpreter enabled [ 0.294529] ACPI: PM: (supports S0 S5) [ 0.294602] ACPI: Using IOAPIC for interrupt routing [ 0.294689] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.294769] PCI: Using E820 reservations for host bridge windows [ 0.295306] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.306414] ACPI: \_TZ_.FN00: New power resource [ 0.306514] ACPI: \_TZ_.FN01: New power resource [ 0.306613] ACPI: \_TZ_.FN02: New power resource [ 0.306730] ACPI: \_TZ_.FN03: New power resource [ 0.306845] ACPI: \_TZ_.FN04: New power resource [ 0.307672] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.307814] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.308487] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.308549] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.309059] PCI host bridge to bus 0000:00 [ 0.309173] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.309234] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.309293] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.309369] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000e7fff window] [ 0.309445] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.309521] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.309618] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 conventional PCI endpoint [ 0.309998] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 PCIe Root Port [ 0.310151] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.310382] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.310885] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400 PCIe Root Port [ 0.311039] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.311103] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.311167] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.311387] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.311750] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400 PCIe Root Port [ 0.312009] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.312073] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.312137] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.312355] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.312730] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 conventional PCI endpoint [ 0.312855] pci 0000:00:02.0: BAR 0 [mem 0xf7800000-0xf7bfffff 64bit] [ 0.312985] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.313063] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.313187] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.313536] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.313648] pci 0000:00:03.0: BAR 0 [mem 0xf7e30000-0xf7e33fff 64bit] [ 0.314123] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.314271] pci 0000:00:14.0: BAR 0 [mem 0xf7e20000-0xf7e2ffff 64bit] [ 0.314587] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.314835] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.315019] pci 0000:00:16.0: BAR 0 [mem 0xf7e3c000-0xf7e3c00f 64bit] [ 0.315319] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.315508] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 conventional PCI endpoint [ 0.315636] pci 0000:00:16.3: BAR 0 [io 0xf0e0-0xf0e7] [ 0.315720] pci 0000:00:16.3: BAR 1 [mem 0xf7e3a000-0xf7e3afff] [ 0.316207] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 conventional PCI endpoint [ 0.316335] pci 0000:00:19.0: BAR 0 [mem 0xf7e00000-0xf7e1ffff] [ 0.316421] pci 0000:00:19.0: BAR 1 [mem 0xf7e39000-0xf7e39fff] [ 0.316506] pci 0000:00:19.0: BAR 2 [io 0xf080-0xf09f] [ 0.316792] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.317047] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.317176] pci 0000:00:1a.0: BAR 0 [mem 0xf7e38000-0xf7e383ff] [ 0.317532] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.317749] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.317953] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.318281] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.318402] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.318461] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.318837] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.319052] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.319374] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.319493] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.319553] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.319904] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.320062] pci 0000:00:1d.0: BAR 0 [mem 0xf7e37000-0xf7e373ff] [ 0.320448] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.320664] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 conventional PCI endpoint [ 0.321235] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.321364] pci 0000:00:1f.2: BAR 0 [io 0xf0d0-0xf0d7] [ 0.321533] pci 0000:00:1f.2: BAR 1 [io 0xf0c0-0xf0c3] [ 0.321629] pci 0000:00:1f.2: BAR 2 [io 0xf0b0-0xf0b7] [ 0.321732] pci 0000:00:1f.2: BAR 3 [io 0xf0a0-0xf0a3] [ 0.321815] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f] [ 0.321898] pci 0000:00:1f.2: BAR 5 [mem 0xf7e36000-0xf7e367ff] [ 0.322106] pci 0000:00:1f.2: PME# supported from D3hot [ 0.322290] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.322520] pci 0000:00:1f.3: BAR 0 [mem 0xf7e35000-0xf7e350ff 64bit] [ 0.322659] pci 0000:00:1f.3: BAR 4 [io 0x0580-0x059f] [ 0.322966] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.323175] pci 0000:02:00.0: working around ROM BAR overlap defect [ 0.323235] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.323371] pci 0000:02:00.0: BAR 0 [mem 0xf7d00000-0xf7d7ffff] [ 0.323493] pci 0000:02:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.323621] pci 0000:02:00.0: BAR 3 [mem 0xf7d80000-0xf7d83fff] [ 0.324030] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.324387] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.324616] pci 0000:03:00.0: working around ROM BAR overlap defect [ 0.324675] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.324799] pci 0000:03:00.0: BAR 0 [mem 0xf7c00000-0xf7c7ffff] [ 0.324929] pci 0000:03:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.325011] pci 0000:03:00.0: BAR 3 [mem 0xf7c80000-0xf7c83fff] [ 0.325363] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.325649] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.325834] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.326118] pci 0000:05:00.0: [1283:8893] type 01 class 0x060401 conventional PCI bridge [ 0.326386] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.326834] pci 0000:05:00.0: supports D1 D2 [ 0.326909] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327129] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.327310] pci_bus 0000:06: extended config space not accessible [ 0.327550] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.327758] pci_bus 0000:00: on NUMA node 0 [ 0.327945] xen: registering gsi 13 triggering 1 polarity 0 [ 0.328683] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.328793] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.328921] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.329029] ACPI: PCI: Interrupt link LNKD configured for IRQ 3 [ 0.329135] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.329326] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.329384] ACPI: PCI: Interrupt link LNKF disabled [ 0.329487] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.329545] ACPI: PCI: Interrupt link LNKG disabled [ 0.329651] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.330045] xen:balloon: Initialising balloon driver [ 0.330123] iommu: Default domain type: Translated [ 0.330123] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.330123] SCSI subsystem initialized [ 0.330619] libata version 3.00 loaded. [ 0.330628] ACPI: bus type USB registered [ 0.330702] usbcore: registered new interface driver usbfs [ 0.330762] usbcore: registered new interface driver hub [ 0.330832] usbcore: registered new device driver usb [ 0.330907] pps_core: LinuxPPS API ver. 1 registered [ 0.330963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.331043] PTP clock support registered [ 0.331120] Advanced Linux Sound Architecture Driver Initialized. [ 0.331120] NetLabel: Initializing [ 0.331602] NetLabel: domain hash size = 128 [ 0.331659] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.331730] NetLabel: unlabeled traffic allowed by default [ 0.331805] PCI: Using ACPI for IRQ routing [ 0.339087] PCI: pci_cache_line_size set to 64 bytes [ 0.339287] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.339290] e820: reserve RAM buffer [mem 0x20063000-0x23ffffff] [ 0.339315] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.339315] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.339315] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.339315] vgaarb: loaded [ 0.339986] clocksource: Switched to clocksource tsc-early [ 0.340121] VFS: Disk quotas dquot_6.6.0 [ 0.340249] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.340325] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.340410] pnp: PnP ACPI init [ 0.340410] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.340410] system 00:00: [io 0xffff] has been reserved [ 0.340420] system 00:00: [io 0xffff] has been reserved [ 0.340479] system 00:00: [io 0xffff] has been reserved [ 0.340537] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.340598] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.340658] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.340718] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.340779] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.340839] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.340910] xen: registering gsi 8 triggering 1 polarity 0 [ 0.340960] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.341151] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.341222] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.341222] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.341222] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.341693] xen: registering gsi 4 triggering 1 polarity 0 [ 0.341696] Already setup the GSI :4 [ 0.341751] pnp 00:05: [dma 0 disabled] [ 0.342482] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.342546] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.342683] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.342743] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.342804] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.342865] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.342925] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.342986] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.343047] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.343107] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.343168] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.343228] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.343538] pnp: PnP ACPI: found 8 devices [ 0.361774] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.361876] NET: Registered PF_INET protocol family [ 0.361951] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.362214] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.362296] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.362374] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.362456] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.362547] TCP: Hash tables configured (established 4096 bind 4096) [ 0.362675] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.362764] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.362843] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.363055] RPC: Registered named UNIX socket transport module. [ 0.363120] RPC: Registered udp transport module. [ 0.363177] RPC: Registered tcp transport module. [ 0.363234] RPC: Registered tcp-with-tls transport module. [ 0.363293] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.363629] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.363718] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.363778] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.363848] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.363928] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.363988] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.364057] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.364137] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.364231] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.364333] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.364427] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.364489] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.364549] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.364617] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000e7fff window] [ 0.364688] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ 0.364764] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.364857] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.364916] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.364974] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.365146] xen: registering gsi 16 triggering 0 polarity 1 [ 0.365162] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.365373] xen: registering gsi 17 triggering 0 polarity 1 [ 0.365388] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.381725] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 16003 usecs [ 0.381858] xen: registering gsi 23 triggering 0 polarity 1 [ 0.381872] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.397719] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 15523 usecs [ 0.397845] PCI: CLS 64 bytes, default 64 [ 0.397904] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.397950] Unpacking initramfs... [ 0.397962] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.398136] kvm_intel: VMX not supported by CPU 1 [ 0.398192] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.398248] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 0.398386] clocksource: Switched to clocksource tsc [ 0.404738] Initialise system trusted keyrings [ 0.404921] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.405151] NFS: Registering the id_resolver key type [ 0.405224] Key type id_resolver registered [ 0.405287] Key type id_legacy registered [ 0.405382] 9p: Installing v9fs 9p2000 file system support [ 0.416348] Key type asymmetric registered [ 0.416418] Asymmetric key parser 'x509' registered [ 0.416496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.416580] io scheduler mq-deadline registered [ 0.416636] io scheduler kyber registered [ 0.416967] xen: registering gsi 16 triggering 0 polarity 1 [ 0.416974] Already setup the GSI :16 [ 0.417167] pcieport 0000:00:01.0: PME: Signaling with IRQ 50 [ 0.417421] xen: registering gsi 16 triggering 0 polarity 1 [ 0.417426] Already setup the GSI :16 [ 0.417584] pcieport 0000:00:01.1: PME: Signaling with IRQ 51 [ 0.417787] xen: registering gsi 16 triggering 0 polarity 1 [ 0.417792] Already setup the GSI :16 [ 0.417949] pcieport 0000:00:01.2: PME: Signaling with IRQ 52 [ 0.418189] xen: registering gsi 16 triggering 0 polarity 1 [ 0.418193] Already setup the GSI :16 [ 0.418406] pcieport 0000:00:1c.0: PME: Signaling with IRQ 53 [ 0.418641] xen: registering gsi 19 triggering 0 polarity 1 [ 0.418654] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.418792] pcieport 0000:00:1c.3: PME: Signaling with IRQ 54 [ 0.419102] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.419807] ACPI: button: Power Button [PWRB] [ 0.419891] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.420039] ACPI: button: Power Button [PWRF] [ 0.420367] Monitor-Mwait will be used to enter C-1 state [ 0.420395] Monitor-Mwait will be used to enter C-2 state [ 0.420405] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.420603] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.420805] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.421148] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.421647] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.421709] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.421963] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.422022] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.422358] xen:xen_evtchn: Event-channel device installed [ 0.422495] xen_pciback: backend is vpci [ 0.422940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.423431] xen: registering gsi 19 triggering 0 polarity 1 [ 0.423437] Already setup the GSI :19 [ 0.423743] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.424021] hpet_acpi_add: no address or irqs in _CRS [ 0.424125] Non-volatile memory driver v1.3 [ 0.425354] loop: module loaded [ 0.428692] ahci 0000:00:1f.2: version 3.0 [ 0.428803] xen: registering gsi 19 triggering 0 polarity 1 [ 0.428811] Already setup the GSI :19 [ 0.428814] xen: registering gsi 16 triggering 0 polarity 1 [ 0.428884] Already setup the GSI :16 [ 0.428988] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.429087] ahci 0000:00:1f.2: 5/5 ports implemented (port mask 0x1f) [ 0.429157] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.441933] scsi host0: ahci [ 0.442224] scsi host1: ahci [ 0.442509] scsi host2: ahci [ 0.442697] scsi host3: ahci [ 0.442879] scsi host4: ahci [ 0.442959] ata1: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36100 irq 56 lpm-pol 0 [ 0.443054] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 56 lpm-pol 0 [ 0.443177] ata3: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36200 irq 56 lpm-pol 0 [ 0.443266] ata4: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36280 irq 56 lpm-pol 0 [ 0.443347] ata5: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36300 irq 56 lpm-pol 0 [ 0.443597] tun: Universal TUN/TAP device driver, 1.6 [ 0.443734] e100: Intel(R) PRO/100 Network Driver [ 0.443797] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.443866] sky2: driver version 1.30 [ 0.443941] xen_netfront: Initialising Xen virtual ethernet driver [ 0.444182] xen: registering gsi 16 triggering 0 polarity 1 [ 0.444189] Already setup the GSI :16 [ 0.444328] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.444330] xen: registering gsi 17 triggering 0 polarity 1 [ 0.444394] Already setup the GSI :17 [ 0.444617] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.444660] xen: registering gsi 23 triggering 0 polarity 1 [ 0.444701] Already setup the GSI :23 [ 0.445762] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.446137] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.446157] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.446256] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.446307] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.446367] ehci-pci 0000:00:1a.0: debug port 2 [ 0.446428] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.446674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.446812] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.446943] usb usb1: Product: xHCI Host Controller [ 0.447037] usb usb1: Manufacturer: Linux 6.9.0-rc5+ xhci-hcd [ 0.447134] usb usb1: SerialNumber: 0000:00:14.0 [ 0.447447] hub 1-0:1.0: USB hub found [ 0.447563] hub 1-0:1.0: 15 ports detected [ 0.450399] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7e38000 [ 0.451805] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09 [ 0.451885] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.451961] usb usb3: Product: xHCI Host Controller [ 0.452016] usb usb3: Manufacturer: Linux 6.9.0-rc5+ xhci-hcd [ 0.452074] usb usb3: SerialNumber: 0000:00:14.0 [ 0.452240] hub 3-0:1.0: USB hub found [ 0.452351] hub 3-0:1.0: 6 ports detected [ 0.453407] usbcore: registered new interface driver usblp [ 0.453473] usbcore: registered new interface driver usb-storage [ 0.453553] i8042: PNP: No PS/2 controller found. [ 0.453775] rtc_cmos 00:01: RTC can wake from S4 [ 0.454288] rtc_cmos 00:01: registered as rtc0 [ 0.454389] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.454490] device-mapper: uevent: version 1.0.3 [ 0.454622] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.454656] xen: registering gsi 18 triggering 0 polarity 1 [ 0.454710] intel_pstate: CPU model not supported [ 0.454725] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.454777] hid: raw HID events driver (C) Jiri Kosina [ 0.454843] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.454947] usbcore: registered new interface driver usbhid [ 0.455009] usbhid: USB HID core driver [ 0.455401] xen: registering gsi 16 triggering 0 polarity 1 [ 0.455407] Already setup the GSI :16 [ 0.455484] snd_hda_intel 0000:00:03.0: Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915 [ 0.455888] Initializing XFRM netlink socket [ 0.455991] NET: Registered PF_INET6 protocol family [ 0.456237] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.456271] Segment Routing with IPv6 [ 0.456377] In-situ OAM (IOAM) with IPv6 [ 0.456456] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.456625] NET: Registered PF_PACKET protocol family [ 0.456703] 9pnet: Installing 9P2000 support [ 0.456789] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 0.456794] Key type dns_resolver registered [ 0.457165] IPI shorthand broadcast: enabled [ 0.457269] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.457446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.457531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.457610] usb usb2: Product: EHCI Host Controller [ 0.457668] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.457728] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.457968] hub 2-0:1.0: USB hub found [ 0.458043] hub 2-0:1.0: 3 ports detected [ 0.458425] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.458484] snd_hda_intel 0000:00:03.0: Cannot probe codecs, giving up [ 0.458599] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.458704] ehci-pci 0000:00:1d.0: debug port 2 [ 0.459575] sched_clock: Marking stable (439003788, 20241376)->(462565290, -3320126) [ 0.460007] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.462739] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e37000 [ 0.462742] registered taskstats version 1 [ 0.462857] Loading compiled-in X.509 certificates [ 0.463852] PM: Magic number: 4:234:863 [ 0.463995] xen_memory xen_memory0: hash matches [ 0.464090] printk: legacy console [netcon0] enabled [ 0.464149] netconsole: network logging started [ 0.464436] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.469275] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.469429] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.469538] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.469613] usb usb4: Product: EHCI Host Controller [ 0.469669] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.469726] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.469952] hub 4-0:1.0: USB hub found [ 0.470016] hub 4-0:1.0: 3 ports detected [ 0.473104] Freeing initrd memory: 20112K [ 0.481053] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.481272] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.481364] ALSA device list: [ 0.481418] No soundcards found. [ 0.481867] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.700296] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.708293] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 0.752098] ata3: SATA link down (SStatus 0 SControl 300) [ 0.752203] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.752615] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.752692] ata2: SATA link down (SStatus 0 SControl 300) [ 0.752788] ata4: SATA link down (SStatus 0 SControl 300) [ 0.754684] ata1.00: ATA-8: WD1003FBYX-88 LEN, WB33, max UDMA/133 [ 0.755241] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.757335] ata1.00: configured for UDMA/133 [ 0.757517] scsi 0:0:0:0: Direct-Access ATA WD1003FBYX-88 WB33 PQ: 0 ANSI: 5 [ 0.757927] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.757943] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.758031] sd 0:0:0:0: [sda] Write Protect is off [ 0.758140] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.758163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.758366] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.763658] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.763738] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.764717] ata5.00: ATAPI: PLDS DVD-RW DU8A5SH, BL61, max UDMA/100 [ 0.772188] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.772268] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.773796] sda: sda1 sda2 < sda5 > [ 0.774072] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 0.777943] ata5.00: configured for UDMA/100 [ 0.784995] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DU8A5SH BL61 PQ: 0 ANSI: 5 [ 0.819096] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.819180] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.829666] usb 2-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.829749] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.830047] hub 2-1:1.0: USB hub found [ 0.830261] hub 2-1:1.0: 6 ports detected [ 0.835699] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 0.835788] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 0.836640] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.836750] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.837051] hub 4-1:1.0: USB hub found [ 0.837134] Freeing unused kernel image (initmem) memory: 2664K [ 0.837198] Write protecting the kernel read-only data: 22528k [ 0.837266] hub 4-1:1.0: 8 ports detected [ 0.848326] Freeing unused kernel image (rodata/data gap) memory: 100K [ 0.916823] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.916885] Run /init as init process [ 0.916937] with arguments: [ 0.916938] /init [ 0.916939] placeholder [ 0.916939] with environment: [ 0.916940] HOME=/ [ 0.916941] TERM=linux [ 1.127976] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.128050] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.128275] xen: registering gsi 17 triggering 0 polarity 1 [ 1.128282] Already setup the GSI :17 [ 1.130623] e1000e: Intel(R) PRO/1000 Network Driver [ 1.130688] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.130823] xen: registering gsi 20 triggering 0 polarity 1 [ 1.130843] xen: --> pirq=20 -> irq=20 (gsi=20) [ 1.131021] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.157122] pps pps0: new PPS source ptp0 [ 1.157313] igb 0000:02:00.0: added PHC on eth0 [ 1.157398] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.157461] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:5f [ 1.157568] igb 0000:02:00.0: eth0: PBA No: 000300-000 [ 1.157627] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.157783] xen: registering gsi 18 triggering 0 polarity 1 [ 1.157790] Already setup the GSI :18 [ 1.186681] pps pps1: new PPS source ptp1 [ 1.186850] igb 0000:03:00.0: added PHC on eth1 [ 1.186930] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.187000] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:60 [ 1.187092] igb 0000:03:00.0: eth1: PBA No: 000300-000 [ 1.187158] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.188586] igb 0000:03:00.0 enx4439c46d2060: renamed from eth1 [ 1.188849] igb 0000:02:00.0 enx4439c46d205f: renamed from eth0 [ 1.207027] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.276816] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:39:c4:39:a1:19 [ 1.276900] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.277002] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.278317] e1000e 0000:00:19.0 enx4439c439a119: renamed from eth0 [ 1.870740] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 1.874425] EXT4-fs (dm-0): mounted filesystem edf4049e-9875-426e-bb71-592a9bc2ab23 ro with ordered data mode. Quota mode: none. [ 5.130577] EXT4-fs (dm-0): re-mounted edf4049e-9875-426e-bb71-592a9bc2ab23 r/w. Quota mode: none. [ 6.453035] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 6.460678] EXT4-fs (sda1): mounted filesystem 579ae132-e095-4585-971d-2b8529a67857 r/w with ordered data mode. Quota mode: none. [ 6.516750] Adding 1949692k swap on /dev/mapper/huxelrebe1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.118507] xenbr0: port 1(enx4439c46d2060) entered blocking state [ 8.118604] xenbr0: port 1(enx4439c46d2060) entered disabled state [ 8.118733] igb 0000:03:00.0 enx4439c46d2060: entered allmulticast mode [ 8.118826] igb 0000:03:00.0 enx4439c46d2060: entered promiscuous mode [ 11.041753] igb 0000:03:00.0 enx4439c46d2060: igb: enx4439c46d2060 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 11.146517] xenbr0: port 1(enx4439c46d2060) entered blocking state [ 11.146635] xenbr0: port 1(enx4439c46d2060) entered forwarding state