[ 0.000000] Linux version 6.9.0-rc5+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 00:59:00 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000023] Xen PV: Detected 4 vCPUS [ 0.000485] tsc: Detected 3092.972 MHz processor [ 0.000896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000905] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000908] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000909] MTRRs set to read-only [ 0.000913] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000946] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024399] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.024406] ACPI: Early table checksum verification disabled [ 0.033941] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033952] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033985] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034026] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.034042] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.034058] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034074] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034090] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034106] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034122] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034137] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034153] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034169] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034185] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034201] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034216] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034232] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034248] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034264] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034280] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034296] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034311] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034327] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034335] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034337] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034338] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034339] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034339] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034340] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034341] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034342] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034343] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034343] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034344] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034345] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034346] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034346] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034347] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034348] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034349] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034350] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034350] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034351] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034352] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034445] APIC: Switched APIC routing to: Xen PV [ 0.039257] Zone ranges: [ 0.039258] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039260] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039261] Normal empty [ 0.039262] Movable zone start for each node [ 0.039263] Early memory node ranges [ 0.039263] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039265] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039266] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039271] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039313] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040934] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040940] p2m virtual area at (____ptrval____), size is 40000000 [ 0.177129] Remapped 101 page(s) [ 0.177829] ACPI: PM-Timer IO Port: 0x408 [ 0.177986] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.178031] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.178058] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.178062] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.178114] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.178120] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.178129] ACPI: SPCR: SPCR table version 1 [ 0.178132] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.178141] CPU topo: Max. logical packages: 1 [ 0.178142] CPU topo: Max. logical dies: 1 [ 0.178142] CPU topo: Max. dies per package: 1 [ 0.178147] CPU topo: Max. threads per core: 1 [ 0.178148] CPU topo: Num. cores per package: 4 [ 0.178149] CPU topo: Num. threads per package: 4 [ 0.178149] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.178164] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.178166] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.178167] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.178169] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.178178] Booting kernel on Xen [ 0.178179] Xen version: 4.19-unstable (preserve-AD) [ 0.178182] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.183554] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183991] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u524288 [ 0.183997] pcpu-alloc: s194344 r8192 d30936 u524288 alloc=1*2097152 [ 0.183999] pcpu-alloc: [0] 0 1 2 3 [ 0.184050] xen: PV spinlocks enabled [ 0.184053] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.184055] Kernel command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.184091] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.184183] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.184227] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184916] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.184919] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.184921] software IO TLB: area num 4. [ 0.247663] Memory: 388564K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135468K reserved, 0K cma-reserved) [ 0.247842] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.250005] Dynamic Preempt: voluntary [ 0.250176] rcu: Preemptible hierarchical RCU implementation. [ 0.250177] rcu: RCU event tracing is enabled. [ 0.250178] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.250179] Trampoline variant of Tasks RCU enabled. [ 0.250180] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.250181] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.250194] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.262308] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.262462] xen:events: Using FIFO-based ABI [ 0.262494] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.262504] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.262512] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.262521] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.262530] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.262539] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.262547] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.262556] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.262565] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.262573] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.262582] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.262591] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.262599] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.262608] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.262618] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.262628] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.267712] Console: colour VGA+ 80x25 [ 0.267716] printk: legacy console [tty0] enabled [ 0.283720] printk: legacy console [hvc0] enabled [ 0.285049] ACPI: Core revision 20230628 [ 0.289474] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289631] Xen: using vcpuop timer interface [ 0.289636] installing Xen timer for CPU 0 [ 0.289789] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.289946] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092972) [ 0.290249] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.290365] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.290492] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290639] Spectre V2 : Mitigation: Retpolines [ 0.290754] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291086] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291204] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291328] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291475] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291621] MDS: Mitigation: Clear CPU buffers [ 0.291951] MMIO Stale Data: Unknown: No mitigations [ 0.292084] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292226] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292346] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292464] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292723] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.310098] Freeing SMP alternatives memory: 40K [ 0.310228] pid_max: default: 32768 minimum: 301 [ 0.310358] LSM: initializing lsm=capability,selinux [ 0.310476] SELinux: Initializing. [ 0.310606] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.310752] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.311224] cpu 0 spinlock event irq 25 [ 0.311339] VPMU disabled by hypervisor. [ 0.311967] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.312120] signal: max sigframe size: 1776 [ 0.312317] rcu: Hierarchical SRCU implementation. [ 0.312433] rcu: Max phase no-delay instances is 400. [ 0.313015] smp: Bringing up secondary CPUs ... [ 0.313396] installing Xen timer for CPU 1 [ 0.313894] installing Xen timer for CPU 2 [ 0.314319] installing Xen timer for CPU 3 [ 0.028313] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0002 [ 0.314518] cpu 1 spinlock event irq 45 [ 0.028313] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0004 [ 0.314991] cpu 2 spinlock event irq 46 [ 0.028313] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0006 [ 0.315253] cpu 3 spinlock event irq 47 [ 0.316138] smp: Brought up 1 node, 4 CPUs [ 0.316382] devtmpfs: initialized [ 0.316959] x86/mm: Memory block size: 128MB [ 0.317349] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.319570] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.319780] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.319933] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.320075] PM: RTC time: 01:58:34, date: 2024-04-24 [ 0.320339] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.320480] xen:grant_table: Grant tables using version 1 layout [ 0.320622] Grant table initialized [ 0.320853] audit: initializing netlink subsys (disabled) [ 0.321002] audit: type=2000 audit(1713923915.553:1): state=initialized audit_enabled=0 res=1 [ 0.321110] thermal_sys: Registered thermal governor 'step_wise' [ 0.321110] thermal_sys: Registered thermal governor 'user_space' [ 0.321144] Simple Boot Flag at 0x4f set to 0x1 [ 0.321390] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.322078] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.322228] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.359966] PCI: Using configuration type 1 for base access [ 0.360135] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.360156] ACPI: Added _OSI(Module Device) [ 0.360156] ACPI: Added _OSI(Processor Device) [ 0.360955] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361072] ACPI: Added _OSI(Processor Aggregator Device) [ 0.367473] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.368197] xen: registering gsi 9 triggering 0 polarity 0 [ 0.368323] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.369977] ACPI: Dynamic OEM Table Load: [ 0.370096] ACPI: SSDT 0xFFFF88800352F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.370813] ACPI: Dynamic OEM Table Load: [ 0.370930] ACPI: SSDT 0xFFFF888003598400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.371398] ACPI: Dynamic OEM Table Load: [ 0.371512] ACPI: SSDT 0xFFFF888003567800 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.372435] ACPI: _OSC evaluated successfully for all CPUs [ 0.372692] ACPI: Interpreter enabled [ 0.372818] ACPI: PM: (supports S0 S1 S3 S5) [ 0.372931] ACPI: Using IOAPIC for interrupt routing [ 0.372976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.373127] PCI: Using E820 reservations for host bridge windows [ 0.373474] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.381676] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.384274] ACPI: \_TZ_.FN00: New power resource [ 0.384451] ACPI: \_TZ_.FN01: New power resource [ 0.384625] ACPI: \_TZ_.FN02: New power resource [ 0.384796] ACPI: \_TZ_.FN03: New power resource [ 0.384975] ACPI: \_TZ_.FN04: New power resource [ 0.385807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.385932] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.386378] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.387056] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.387179] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.387830] PCI host bridge to bus 0000:00 [ 0.387943] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.388068] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.388218] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.388362] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.388505] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.388648] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.388792] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.388953] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.389636] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.389860] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.389990] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.390148] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.390603] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.390957] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.391178] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.391717] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.392068] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.392374] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.392508] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.392639] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.392811] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.393235] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.393448] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.393570] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.393897] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.394111] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.394243] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.394373] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.394832] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.395038] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.395159] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.395486] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.395708] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.396247] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.396577] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.396876] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.396979] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.397443] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.398232] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.398453] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.398608] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.398762] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.398913] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.398990] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.399146] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.399506] pci 0000:00:1f.2: PME# supported from D3hot [ 0.399812] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.400048] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.400282] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.400778] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.401208] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.401452] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.401678] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.401847] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.402448] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.402986] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.403242] pci_bus 0000:03: extended config space not accessible [ 0.403422] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.403643] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.404041] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.404294] pci 0000:03:02.0: supports D1 D2 [ 0.405207] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.405374] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.405522] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.405668] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.405816] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.405950] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.406100] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.406337] pci_bus 0000:00: on NUMA node 0 [ 0.406502] xen: registering gsi 13 triggering 1 polarity 0 [ 0.407015] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.407206] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.407394] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.407520] ACPI: PCI: Interrupt link LNKC disabled [ 0.407705] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.407894] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.408021] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.408209] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.408397] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.408515] ACPI: PCI: Interrupt link LNKH disabled [ 0.408961] xen:balloon: Initialising balloon driver [ 0.409093] iommu: Default domain type: Translated [ 0.409125] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.409289] SCSI subsystem initialized [ 0.409416] libata version 3.00 loaded. [ 0.409416] ACPI: bus type USB registered [ 0.409416] usbcore: registered new interface driver usbfs [ 0.409957] usbcore: registered new interface driver hub [ 0.410117] usbcore: registered new device driver usb [ 0.410247] pps_core: LinuxPPS API ver. 1 registered [ 0.410362] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410512] PTP clock support registered [ 0.410643] Advanced Linux Sound Architecture Driver Initialized. [ 0.411131] NetLabel: Initializing [ 0.411244] NetLabel: domain hash size = 128 [ 0.411357] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.411487] NetLabel: unlabeled traffic allowed by default [ 0.411626] PCI: Using ACPI for IRQ routing [ 0.422529] PCI: pci_cache_line_size set to 64 bytes [ 0.422676] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.422679] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.422702] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.422702] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.422702] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.422950] vgaarb: loaded [ 0.423237] clocksource: Switched to clocksource tsc-early [ 0.423417] VFS: Disk quotas dquot_6.6.0 [ 0.423537] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.423673] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.423825] pnp: PnP ACPI init [ 0.423825] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.423877] system 00:00: [io 0xffff] has been reserved [ 0.423992] system 00:00: [io 0xffff] has been reserved [ 0.424107] system 00:00: [io 0xffff] has been reserved [ 0.424221] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.424340] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.424458] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.424577] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.424668] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.424668] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.425008] xen: registering gsi 8 triggering 1 polarity 0 [ 0.425071] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.425471] xen: registering gsi 4 triggering 1 polarity 0 [ 0.425475] Already setup the GSI :4 [ 0.425992] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.426116] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.426236] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.426355] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.426475] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.426595] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.426714] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.426835] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.426967] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.427087] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.427207] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.427596] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.427764] pnp: PnP ACPI: found 6 devices [ 0.454987] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.455162] NET: Registered PF_INET protocol family [ 0.455310] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.455617] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.455768] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.455914] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.456104] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.456270] TCP: Hash tables configured (established 4096 bind 4096) [ 0.456406] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.456532] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.456678] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.459190] RPC: Registered named UNIX socket transport module. [ 0.459312] RPC: Registered udp transport module. [ 0.459425] RPC: Registered tcp transport module. [ 0.459539] RPC: Registered tcp-with-tls transport module. [ 0.459653] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.460109] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.460233] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.460369] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.460499] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.460665] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.460785] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.460920] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.461087] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.461219] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.461372] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.461491] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.461608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.461729] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.461850] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.461979] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.462099] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.462215] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.462334] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.462481] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.462596] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.462714] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.462833] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.462961] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.463079] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.463198] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.463318] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.463438] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.463672] xen: registering gsi 22 triggering 0 polarity 1 [ 0.463696] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.486067] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21923 usecs [ 0.486293] xen: registering gsi 20 triggering 0 polarity 1 [ 0.486316] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.508070] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21311 usecs [ 0.508274] PCI: CLS 64 bytes, default 64 [ 0.508394] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.508513] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.508657] Unpacking initramfs... [ 0.508712] kvm_intel: VMX not supported by CPU 0 [ 0.508888] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.509012] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.509363] clocksource: Switched to clocksource tsc [ 0.515233] Initialise system trusted keyrings [ 0.515477] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.515785] NFS: Registering the id_resolver key type [ 0.515912] Key type id_resolver registered [ 0.516025] Key type id_legacy registered [ 0.516201] 9p: Installing v9fs 9p2000 file system support [ 0.529311] Key type asymmetric registered [ 0.529450] Asymmetric key parser 'x509' registered [ 0.529593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.529749] io scheduler mq-deadline registered [ 0.529863] io scheduler kyber registered [ 0.530302] xen: registering gsi 16 triggering 0 polarity 1 [ 0.530357] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.530591] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.530960] xen: registering gsi 16 triggering 0 polarity 1 [ 0.530966] Already setup the GSI :16 [ 0.531267] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.531740] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.532001] ACPI: button: Sleep Button [SLPB] [ 0.532146] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.532422] ACPI: button: Power Button [PWRF] [ 0.532924] Monitor-Mwait will be used to enter C-1 state [ 0.532968] Monitor-Mwait will be used to enter C-3 state [ 0.532987] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.533293] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.533663] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.534184] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.534839] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.534960] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.535270] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.535410] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.535829] xen:xen_evtchn: Event-channel device installed [ 0.536029] xen_pciback: backend is vpci [ 0.536799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.537625] hpet_acpi_add: no address or irqs in _CRS [ 0.537813] Non-volatile memory driver v1.3 [ 0.539671] loop: module loaded [ 0.544475] ahci 0000:00:1f.2: version 3.0 [ 0.544572] xen: registering gsi 21 triggering 0 polarity 1 [ 0.544601] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.554934] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.555094] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.555213] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.572124] scsi host0: ahci [ 0.572517] scsi host1: ahci [ 0.572913] scsi host2: ahci [ 0.573230] scsi host3: ahci [ 0.573562] scsi host4: ahci [ 0.573893] scsi host5: ahci [ 0.574047] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.574196] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.574355] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.574503] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.574650] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.574796] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.575132] tun: Universal TUN/TAP device driver, 1.6 [ 0.575354] e100: Intel(R) PRO/100 Network Driver [ 0.575483] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.575647] sky2: driver version 1.30 [ 0.575781] xen_netfront: Initialising Xen virtual ethernet driver [ 0.576059] usbcore: registered new interface driver usblp [ 0.576183] usbcore: registered new interface driver usb-storage [ 0.576212] xen: registering gsi 22 triggering 0 polarity 1 [ 0.576310] Already setup the GSI :22 [ 0.576348] i8042: PNP: No PS/2 controller found. [ 0.576515] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.576699] xen: registering gsi 20 triggering 0 polarity 1 [ 0.576706] Already setup the GSI :20 [ 0.576913] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.576951] rtc_cmos 00:01: RTC can wake from S4 [ 0.577095] ehci-pci 0000:00:1a.0: debug port 2 [ 0.577749] rtc_cmos 00:01: registered as rtc0 [ 0.577931] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.578096] device-mapper: uevent: version 1.0.3 [ 0.578282] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.578470] intel_pstate: CPU model not supported [ 0.578609] hid: raw HID events driver (C) Jiri Kosina [ 0.578838] usbcore: registered new interface driver usbhid [ 0.578967] usbhid: USB HID core driver [ 0.579379] Initializing XFRM netlink socket [ 0.579561] NET: Registered PF_INET6 protocol family [ 0.579980] xen: registering gsi 22 triggering 0 polarity 1 [ 0.579986] Already setup the GSI :22 [ 0.580206] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.581287] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.581366] Segment Routing with IPv6 [ 0.581539] In-situ OAM (IOAM) with IPv6 [ 0.581687] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.581937] NET: Registered PF_PACKET protocol family [ 0.582079] 9pnet: Installing 9P2000 support [ 0.582175] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.582213] Key type dns_resolver registered [ 0.582778] IPI shorthand broadcast: enabled [ 0.585137] sched_clock: Marking stable (557006203, 27313719)->(589144131, -4824209) [ 0.585685] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.586131] registered taskstats version 1 [ 0.586245] Loading compiled-in X.509 certificates [ 0.587501] PM: Magic number: 4:337:964 [ 0.587679] printk: legacy console [netcon0] enabled [ 0.587795] netconsole: network logging started [ 0.588151] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.588340] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.588695] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.588845] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.588988] usb usb1: Product: EHCI Host Controller [ 0.589103] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.589220] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.589519] hub 1-0:1.0: USB hub found [ 0.589665] hub 1-0:1.0: 2 ports detected [ 0.590008] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.590187] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.590379] ehci-pci 0000:00:1d.0: debug port 2 [ 0.594499] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.601359] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.601623] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.601772] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.601803] Freeing initrd memory: 20116K [ 0.601916] usb usb2: Product: EHCI Host Controller [ 0.602145] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.602269] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.602561] hub 2-0:1.0: USB hub found [ 0.602694] hub 2-0:1.0: 2 ports detected [ 0.613916] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.614229] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.614404] ALSA device list: [ 0.614552] No soundcards found. [ 0.615162] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.835407] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.843424] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.887852] ata6: SATA link down (SStatus 0 SControl 300) [ 0.887995] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.888156] ata5: SATA link down (SStatus 0 SControl 300) [ 0.888298] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.888452] ata2: SATA link down (SStatus 0 SControl 300) [ 0.888583] ata4: SATA link down (SStatus 0 SControl 300) [ 0.889912] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.890577] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.892722] ata1.00: configured for UDMA/133 [ 0.892996] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.893431] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.893693] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.893739] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.893860] sd 0:0:0:0: [sda] Write Protect is off [ 0.894072] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.894107] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.894310] ata3.00: configured for UDMA/100 [ 0.894337] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.912148] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.929495] sda: sda1 sda2 < sda5 > [ 0.930005] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 0.947271] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.947441] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.964054] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.964204] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.964712] hub 1-1:1.0: USB hub found [ 0.965056] hub 1-1:1.0: 6 ports detected [ 0.967549] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.967673] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.969582] Freeing unused kernel image (initmem) memory: 2664K [ 0.969704] Write protecting the kernel read-only data: 22528k [ 0.971727] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.971873] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.972255] hub 2-1:1.0: USB hub found [ 0.972477] hub 2-1:1.0: 6 ports detected [ 0.988933] Freeing unused kernel image (rodata/data gap) memory: 100K [ 1.159855] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.160039] Run /init as init process [ 1.160182] with arguments: [ 1.160184] /init [ 1.160184] placeholder [ 1.160185] with environment: [ 1.160186] HOME=/ [ 1.160187] TERM=linux [ 1.506996] e1000e: Intel(R) PRO/1000 Network Driver [ 1.507126] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.507664] xen: registering gsi 19 triggering 0 polarity 1 [ 1.507695] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.507956] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.624291] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.738556] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3d [ 1.738710] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.738876] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.739111] xen: registering gsi 16 triggering 0 polarity 1 [ 1.739120] Already setup the GSI :16 [ 1.739573] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.783363] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.832244] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3c [ 1.832408] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.832614] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.834682] e1000e 0000:00:19.0 enx001e6796a53d: renamed from eth0 [ 1.835247] e1000e 0000:02:00.0 enx001e6796a53c: renamed from eth1 [ 1.913348] random: crng init done [ 2.525977] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.530936] EXT4-fs (dm-0): mounted filesystem a78c7884-c3ac-4404-a57f-0793579949aa ro with ordered data mode. Quota mode: none. [ 5.961015] EXT4-fs (dm-0): re-mounted a78c7884-c3ac-4404-a57f-0793579949aa r/w. Quota mode: none. [ 7.685890] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.703767] EXT4-fs (sda1): mounted filesystem 6251e3d5-55c6-4c5d-bd2c-909796357e61 r/w with ordered data mode. Quota mode: none. [ 7.787255] Adding 1949692k swap on /dev/mapper/italia1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.595138] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 9.596943] xenbr0: port 1(enx001e6796a53c) entered disabled state [ 9.597069] e1000e 0000:02:00.0 enx001e6796a53c: entered allmulticast mode [ 9.597224] e1000e 0000:02:00.0 enx001e6796a53c: entered promiscuous mode [ 12.023501] e1000e 0000:02:00.0 enx001e6796a53c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.024092] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 12.024223] xenbr0: port 1(enx001e6796a53c) entered forwarding state