[ 0.000000] Linux version 6.1.87+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 02:13:14 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000464] tsc: Detected 3092.976 MHz processor [ 0.000873] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000876] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000883] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000884] Disabled [ 0.000885] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000889] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000923] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024958] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.024964] ACPI: Early table checksum verification disabled [ 0.034685] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.034696] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034728] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034768] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.034783] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.034798] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034813] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034829] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034844] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034859] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034875] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034890] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034906] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034921] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034937] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034952] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034967] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034982] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034998] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035013] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035029] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035044] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035060] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035068] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.035069] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.035070] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.035071] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.035072] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.035073] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.035074] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.035074] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.035075] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.035076] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.035077] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.035077] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.035078] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.035079] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.035080] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.035081] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.035081] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.035082] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.035083] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.035084] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.035085] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.035134] Setting APIC routing to Xen PV. [ 0.039494] Zone ranges: [ 0.039495] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039497] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039498] Normal empty [ 0.039499] Movable zone start for each node [ 0.039499] Early memory node ranges [ 0.039500] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039501] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039503] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039507] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039541] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.041183] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.041186] p2m virtual area at (____ptrval____), size is 40000000 [ 0.220965] Remapped 101 page(s) [ 0.221638] ACPI: PM-Timer IO Port: 0x408 [ 0.221779] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.221824] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.221850] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.221853] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.221906] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.221911] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.221921] ACPI: SPCR: SPCR table version 1 [ 0.221923] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.221985] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.222002] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.222004] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.222004] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.222006] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.222010] Booting kernel on Xen [ 0.222011] Xen version: 4.19-unstable (preserve-AD) [ 0.222014] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.226649] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.226875] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.226880] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.226883] pcpu-alloc: [0] 0 1 2 3 [ 0.226939] xen: PV spinlocks enabled [ 0.226941] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.226945] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.226947] Kernel command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.226981] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.227023] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.227042] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.227718] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.227720] software IO TLB: area num 4. [ 0.283786] Memory: 390892K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 133140K reserved, 0K cma-reserved) [ 0.284107] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.286154] Dynamic Preempt: voluntary [ 0.286237] rcu: Preemptible hierarchical RCU implementation. [ 0.286238] rcu: RCU event tracing is enabled. [ 0.286238] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.286240] Trampoline variant of Tasks RCU enabled. [ 0.286241] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.286241] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.296852] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.296968] xen:events: Using FIFO-based ABI [ 0.296991] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.297000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.297009] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.297016] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.297024] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.297032] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.297040] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.297048] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.297056] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.297063] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.297071] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.297079] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.297089] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.297097] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.297105] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.297115] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.302408] Console: colour VGA+ 80x25 [ 0.317382] printk: console [tty0] enabled [ 0.318581] printk: console [hvc0] enabled [ 0.318697] ACPI: Core revision 20220331 [ 0.323111] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.323266] Xen: using vcpuop timer interface [ 0.323271] installing Xen timer for CPU 0 [ 0.323413] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.323569] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.95 BogoMIPS (lpj=3092976) [ 0.323869] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.323985] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.324111] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.324257] Spectre V2 : Mitigation: Retpolines [ 0.324369] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.324575] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.324730] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.324850] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.324996] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.325114] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.325259] MDS: Mitigation: Clear CPU buffers [ 0.325372] MMIO Stale Data: Unknown: No mitigations [ 0.325504] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.325574] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.325692] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.325811] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.325931] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.339951] Freeing SMP alternatives memory: 40K [ 0.340574] pid_max: default: 32768 minimum: 301 [ 0.340700] LSM: Security Framework initializing [ 0.340818] SELinux: Initializing. [ 0.340950] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.341097] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.341578] cpu 0 spinlock event irq 25 [ 0.341694] VPMU disabled by hypervisor. [ 0.342180] cblist_init_generic: Setting adjustable number of callback queues. [ 0.342325] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.342489] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.342573] signal: max sigframe size: 1776 [ 0.342746] rcu: Hierarchical SRCU implementation. [ 0.342860] rcu: Max phase no-delay instances is 400. [ 0.343286] smp: Bringing up secondary CPUs ... [ 0.343657] installing Xen timer for CPU 1 [ 0.344099] cpu 1 spinlock event irq 35 [ 0.344720] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.345135] installing Xen timer for CPU 2 [ 0.345935] cpu 2 spinlock event irq 41 [ 0.345935] installing Xen timer for CPU 3 [ 0.346800] cpu 3 spinlock event irq 47 [ 0.346800] smp: Brought up 1 node, 4 CPUs [ 0.346867] smpboot: Max logical packages: 1 [ 0.347610] devtmpfs: initialized [ 0.347730] x86/mm: Memory block size: 128MB [ 0.348024] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.350672] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.350877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.351029] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.351268] PM: RTC time: 03:28:57, date: 2024-04-24 [ 0.351523] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.351594] xen:grant_table: Grant tables using version 1 layout [ 0.351729] Grant table initialized [ 0.351936] audit: initializing netlink subsys (disabled) [ 0.352067] audit: type=2000 audit(1713929338.193:1): state=initialized audit_enabled=0 res=1 [ 0.352067] thermal_sys: Registered thermal governor 'step_wise' [ 0.352067] thermal_sys: Registered thermal governor 'user_space' [ 0.352067] Simple Boot Flag at 0x4f set to 0x1 [ 0.352705] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.352977] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.353129] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.387182] PCI: Using configuration type 1 for base access [ 0.389190] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.389628] ACPI: Added _OSI(Module Device) [ 0.389727] ACPI: Added _OSI(Processor Device) [ 0.389841] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.389954] ACPI: Added _OSI(Processor Aggregator Device) [ 0.396740] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.397449] xen: registering gsi 9 triggering 0 polarity 0 [ 0.397865] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.399273] ACPI: Dynamic OEM Table Load: [ 0.399394] ACPI: SSDT 0xFFFF88800351B000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.400301] ACPI: Dynamic OEM Table Load: [ 0.400418] ACPI: SSDT 0xFFFF888003589C00 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.401001] ACPI: Dynamic OEM Table Load: [ 0.401117] ACPI: SSDT 0xFFFF88800354F800 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.402232] ACPI: Interpreter enabled [ 0.402361] ACPI: PM: (supports S0 S1 S3 S5) [ 0.402475] ACPI: Using IOAPIC for interrupt routing [ 0.402603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.402753] PCI: Using E820 reservations for host bridge windows [ 0.403107] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.409133] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.411406] ACPI: PM: Power Resource [FN00] [ 0.411582] ACPI: PM: Power Resource [FN01] [ 0.411750] ACPI: PM: Power Resource [FN02] [ 0.411915] ACPI: PM: Power Resource [FN03] [ 0.412080] ACPI: PM: Power Resource [FN04] [ 0.412900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.413026] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.413596] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.414263] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.414384] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.415024] PCI host bridge to bus 0000:00 [ 0.415137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.415260] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.415380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.415523] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.415573] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.415717] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.415860] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.416015] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 0.416640] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.416832] pci 0000:00:19.0: reg 0x10: [mem 0xc1b00000-0xc1b1ffff] [ 0.416990] pci 0000:00:19.0: reg 0x14: [mem 0xc1b70000-0xc1b70fff] [ 0.417148] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] [ 0.417590] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.417936] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.418128] pci 0000:00:1a.0: reg 0x10: [mem 0xc1b60000-0xc1b603ff] [ 0.418650] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.418983] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.419540] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.419661] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.419786] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.420085] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.420650] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.420853] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.420974] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.421291] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.421481] pci 0000:00:1d.0: reg 0x10: [mem 0xc1b50000-0xc1b503ff] [ 0.421978] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.422297] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.422874] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 [ 0.423616] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.423807] pci 0000:00:1f.2: reg 0x10: [io 0x4090-0x4097] [ 0.423963] pci 0000:00:1f.2: reg 0x14: [io 0x4080-0x4083] [ 0.424117] pci 0000:00:1f.2: reg 0x18: [io 0x4070-0x4077] [ 0.424271] pci 0000:00:1f.2: reg 0x1c: [io 0x4060-0x4063] [ 0.424425] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f] [ 0.424578] pci 0000:00:1f.2: reg 0x24: [mem 0xc1b40000-0xc1b407ff] [ 0.424952] pci 0000:00:1f.2: PME# supported from D3hot [ 0.425248] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.425461] pci 0000:00:1f.3: reg 0x10: [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.425689] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f] [ 0.426163] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.426290] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.426418] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.426560] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.426952] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 0.427168] pci 0000:02:00.0: reg 0x10: [mem 0xc1a00000-0xc1a1ffff] [ 0.427391] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] [ 0.427559] pci 0000:02:00.0: reg 0x1c: [mem 0xc1a20000-0xc1a23fff] [ 0.428049] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.428574] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.428738] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.428867] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.429098] pci_bus 0000:03: extended config space not accessible [ 0.429273] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 [ 0.429463] pci 0000:03:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 0.429820] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.430072] pci 0000:03:02.0: supports D1 D2 [ 0.430431] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.430578] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.430721] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.430868] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.431015] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.431163] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.431311] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.431477] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.431657] pci_bus 0000:00: on NUMA node 0 [ 0.431813] xen: registering gsi 13 triggering 1 polarity 0 [ 0.432308] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.432498] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.432642] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.432761] ACPI: PCI: Interrupt link LNKC disabled [ 0.432941] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.433127] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.433312] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.433497] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.433642] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.433760] ACPI: PCI: Interrupt link LNKH disabled [ 0.434187] xen:balloon: Initialising balloon driver [ 0.434319] iommu: Default domain type: Translated [ 0.434574] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.434738] SCSI subsystem initialized [ 0.434863] libata version 3.00 loaded. [ 0.434863] ACPI: bus type USB registered [ 0.434863] usbcore: registered new interface driver usbfs [ 0.434884] usbcore: registered new interface driver hub [ 0.435004] usbcore: registered new device driver usb [ 0.435129] pps_core: LinuxPPS API ver. 1 registered [ 0.435574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.435725] PTP clock support registered [ 0.435856] Advanced Linux Sound Architecture Driver Initialized. [ 0.435856] NetLabel: Initializing [ 0.435952] NetLabel: domain hash size = 128 [ 0.436065] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.436589] NetLabel: unlabeled traffic allowed by default [ 0.436725] PCI: Using ACPI for IRQ routing [ 0.447203] PCI: pci_cache_line_size set to 64 bytes [ 0.447342] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.447345] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.447367] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.447367] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.447367] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.447573] vgaarb: loaded [ 0.449040] clocksource: Switched to clocksource tsc-early [ 0.449224] VFS: Disk quotas dquot_6.6.0 [ 0.449345] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.449483] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.449483] pnp: PnP ACPI init [ 0.449483] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.449606] system 00:00: [io 0xffff] has been reserved [ 0.449721] system 00:00: [io 0xffff] has been reserved [ 0.449836] system 00:00: [io 0xffff] has been reserved [ 0.449950] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.450072] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.450167] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.450167] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.450167] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.450167] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.450688] xen: registering gsi 8 triggering 1 polarity 0 [ 0.450747] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.451146] xen: registering gsi 4 triggering 1 polarity 0 [ 0.451150] Already setup the GSI :4 [ 0.451655] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.451779] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.451899] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.452019] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.452138] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.452258] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.452378] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.452498] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.452628] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.452749] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.452869] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.453248] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.453417] pnp: PnP ACPI: found 6 devices [ 0.479926] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.480097] NET: Registered PF_INET protocol family [ 0.480256] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.480617] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.480773] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.480939] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.481088] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.481248] TCP: Hash tables configured (established 4096 bind 4096) [ 0.481382] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.481503] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.481659] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.481988] RPC: Registered named UNIX socket transport module. [ 0.482107] RPC: Registered udp transport module. [ 0.482219] RPC: Registered tcp transport module. [ 0.482331] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.482727] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.482877] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.483012] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.483144] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.483310] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.483430] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.483563] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.483730] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.483860] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.484013] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.484133] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.484263] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.484383] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.484502] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.484629] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.484749] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.484864] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.484981] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.485123] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.485239] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.485357] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.485476] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.485606] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.485724] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.485843] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.485962] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.486081] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.486322] xen: registering gsi 22 triggering 0 polarity 1 [ 0.486344] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.508686] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 21896 usecs [ 0.508909] xen: registering gsi 20 triggering 0 polarity 1 [ 0.508927] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.530687] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 21313 usecs [ 0.530889] PCI: CLS 64 bytes, default 64 [ 0.531009] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.531061] Unpacking initramfs... [ 0.531127] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.531477] kvm: no hardware support for 'kvm_intel' [ 0.531608] has_svm: not amd or hygon [ 0.531719] kvm: no hardware support for 'kvm_amd' [ 0.531838] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.532053] clocksource: Switched to clocksource tsc [ 0.535390] Initialise system trusted keyrings [ 0.535635] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.536784] NFS: Registering the id_resolver key type [ 0.536906] Key type id_resolver registered [ 0.537017] Key type id_legacy registered [ 0.537189] 9p: Installing v9fs 9p2000 file system support [ 0.547342] Key type asymmetric registered [ 0.547476] Asymmetric key parser 'x509' registered [ 0.547618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.547771] io scheduler mq-deadline registered [ 0.547886] io scheduler kyber registered [ 0.548537] xen: registering gsi 16 triggering 0 polarity 1 [ 0.548563] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.548780] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.549143] xen: registering gsi 16 triggering 0 polarity 1 [ 0.549147] Already setup the GSI :16 [ 0.549439] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.549872] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.550218] ACPI: button: Sleep Button [SLPB] [ 0.550361] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.550634] ACPI: button: Power Button [PWRF] [ 0.551230] Monitor-Mwait will be used to enter C-1 state [ 0.551269] Monitor-Mwait will be used to enter C-3 state [ 0.551290] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.551707] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.552084] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.552379] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.552893] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.553015] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.553320] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.553439] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.553840] xen:xen_evtchn: Event-channel device installed [ 0.554075] xen_pciback: backend is vpci [ 0.554822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.555538] hpet_acpi_add: no address or irqs in _CRS [ 0.555721] Non-volatile memory driver v1.3 [ 0.555834] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.557752] loop: module loaded [ 0.562616] ahci 0000:00:1f.2: version 3.0 [ 0.562713] xen: registering gsi 21 triggering 0 polarity 1 [ 0.562741] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.573032] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.573192] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.589151] scsi host0: ahci [ 0.589523] scsi host1: ahci [ 0.589908] scsi host2: ahci [ 0.590271] scsi host3: ahci [ 0.590607] scsi host4: ahci [ 0.590949] scsi host5: ahci [ 0.591092] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 [ 0.591238] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 [ 0.591383] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 [ 0.591544] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 [ 0.591690] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 [ 0.591834] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 [ 0.592163] tun: Universal TUN/TAP device driver, 1.6 [ 0.592372] e100: Intel(R) PRO/100 Network Driver [ 0.592501] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.592627] sky2: driver version 1.30 [ 0.592767] xen_netfront: Initialising Xen virtual ethernet driver [ 0.601800] xen: registering gsi 22 triggering 0 polarity 1 [ 0.601808] Already setup the GSI :22 [ 0.601986] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.602203] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.602440] ehci-pci 0000:00:1a.0: debug port 2 [ 0.606618] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.613537] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.613772] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.613921] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.614067] usb usb1: Product: EHCI Host Controller [ 0.614183] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.614300] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.614668] hub 1-0:1.0: USB hub found [ 0.614731] Freeing initrd memory: 19884K [ 0.614798] hub 1-0:1.0: 2 ports detected [ 0.615247] xen: registering gsi 20 triggering 0 polarity 1 [ 0.615254] Already setup the GSI :20 [ 0.615423] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.615636] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.615814] ehci-pci 0000:00:1d.0: debug port 2 [ 0.619985] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.626491] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.626759] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.626906] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.627049] usb usb2: Product: EHCI Host Controller [ 0.627163] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.627278] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.627626] hub 2-0:1.0: USB hub found [ 0.627754] hub 2-0:1.0: 2 ports detected [ 0.628062] usbcore: registered new interface driver usblp [ 0.628192] usbcore: registered new interface driver usb-storage [ 0.628339] i8042: PNP: No PS/2 controller found. [ 0.628791] rtc_cmos 00:01: RTC can wake from S4 [ 0.629424] rtc_cmos 00:01: registered as rtc0 [ 0.629600] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.629772] device-mapper: uevent: version 1.0.3 [ 0.629868] xen: registering gsi 22 triggering 0 polarity 1 [ 0.629891] Already setup the GSI :22 [ 0.630005] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.630070] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.630213] intel_pstate: CPU model not supported [ 0.630466] hid: raw HID events driver (C) Jiri Kosina [ 0.630680] usbcore: registered new interface driver usbhid [ 0.630799] usbhid: USB HID core driver [ 0.631283] Initializing XFRM netlink socket [ 0.631371] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.631587] NET: Registered PF_INET6 protocol family [ 0.632130] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.632214] Segment Routing with IPv6 [ 0.632375] In-situ OAM (IOAM) with IPv6 [ 0.632540] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.632766] NET: Registered PF_PACKET protocol family [ 0.632915] 9pnet: Installing 9P2000 support [ 0.633044] Key type dns_resolver registered [ 0.633545] IPI shorthand broadcast: enabled [ 0.633683] sched_clock: Marking stable (607005135, 26450607)->(652723688, -19267946) [ 0.634124] registered taskstats version 1 [ 0.634238] Loading compiled-in X.509 certificates [ 0.636550] PM: Magic number: 4:34:463 [ 0.636725] printk: console [netcon0] enabled [ 0.636840] netconsole: network logging started [ 0.637122] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.648557] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.648859] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.649466] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.649477] ALSA device list: [ 0.649735] No soundcards found. [ 0.853521] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.869537] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.898048] ata5: SATA link down (SStatus 0 SControl 300) [ 0.898200] ata4: SATA link down (SStatus 0 SControl 300) [ 0.898340] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.898498] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.898639] ata2: SATA link down (SStatus 0 SControl 300) [ 0.900256] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.900900] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.902310] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.903832] ata1.00: configured for UDMA/133 [ 0.904137] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.905038] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.905098] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.905322] sd 0:0:0:0: [sda] Write Protect is off [ 0.905439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.905497] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.905696] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.908766] ata3.00: configured for UDMA/100 [ 0.913994] ata6: SATA link down (SStatus 0 SControl 300) [ 0.921671] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.940490] sda: sda1 sda2 < sda5 > [ 0.941068] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.981332] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.981507] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.982263] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.982417] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.982887] hub 1-1:1.0: USB hub found [ 0.983232] hub 1-1:1.0: 6 ports detected [ 0.998070] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.998222] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.998568] hub 2-1:1.0: USB hub found [ 0.998811] hub 2-1:1.0: 6 ports detected [ 1.008196] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.008351] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.009804] Freeing unused kernel image (initmem) memory: 1580K [ 1.009928] Write protecting the kernel read-only data: 22528k [ 1.029957] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.031162] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.201896] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.202078] Run /init as init process [ 1.202194] with arguments: [ 1.202195] /init [ 1.202196] placeholder [ 1.202197] with environment: [ 1.202197] HOME=/ [ 1.202198] TERM=linux [ 1.544832] e1000e: Intel(R) PRO/1000 Network Driver [ 1.544958] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.545201] xen: registering gsi 19 triggering 0 polarity 1 [ 1.545229] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.545500] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.653827] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.750913] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3d [ 1.751067] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.751234] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.751478] xen: registering gsi 16 triggering 0 polarity 1 [ 1.751485] Already setup the GSI :16 [ 1.751901] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.795401] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.841955] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3c [ 1.842107] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.842312] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.844349] e1000e 0000:00:19.0 enx001e6796a53d: renamed from eth0 [ 1.853843] e1000e 0000:02:00.0 enx001e6796a53c: renamed from eth1 [ 1.930462] random: crng init done [ 2.535738] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.540806] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 5.940489] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.523490] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.540135] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.631643] Adding 1949692k swap on /dev/mapper/italia1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.402093] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 9.402239] xenbr0: port 1(enx001e6796a53c) entered disabled state [ 9.402397] device enx001e6796a53c entered promiscuous mode [ 11.958602] e1000e 0000:02:00.0 enx001e6796a53c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.959166] IPv6: ADDRCONF(NETDEV_CHANGE): enx001e6796a53c: link becomes ready [ 11.959330] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 11.959461] xenbr0: port 1(enx001e6796a53c) entered forwarding state [ 11.959689] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready