[ 0.000000] Linux version 6.1.87+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 02:13:14 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000462] tsc: Detected 3092.974 MHz processor [ 0.000928] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000931] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000937] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000939] Disabled [ 0.000939] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000943] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000977] Kernel/User page tables isolation: disabled on XEN PV. [ 0.025637] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.025643] ACPI: Early table checksum verification disabled [ 0.035299] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.035309] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035341] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035381] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.035396] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.035411] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035427] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035442] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035458] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035473] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035489] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035504] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035520] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.035535] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.035550] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035566] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035581] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.035596] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035612] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035627] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035642] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035658] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035673] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035681] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.035682] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.035683] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.035684] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.035685] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.035686] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.035686] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.035687] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.035688] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.035689] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.035690] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.035690] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.035691] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.035692] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.035693] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.035694] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.035694] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.035695] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.035696] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.035697] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.035698] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.035747] Setting APIC routing to Xen PV. [ 0.040112] Zone ranges: [ 0.040113] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.040115] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.040117] Normal empty [ 0.040117] Movable zone start for each node [ 0.040118] Early memory node ranges [ 0.040118] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.040120] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.040121] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.040125] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.040159] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.041813] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.041818] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221594] Remapped 101 page(s) [ 0.222255] ACPI: PM-Timer IO Port: 0x408 [ 0.222396] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.222441] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.222467] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.222470] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.222523] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.222528] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.222537] ACPI: SPCR: SPCR table version 1 [ 0.222539] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.222601] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.222618] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.222620] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.222621] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.222622] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.222626] Booting kernel on Xen [ 0.222627] Xen version: 4.19-unstable (preserve-AD) [ 0.222630] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.227273] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.227497] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.227503] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.227505] pcpu-alloc: [0] 0 1 2 3 [ 0.227562] xen: PV spinlocks enabled [ 0.227565] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.227568] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.227570] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.227605] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.227647] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.227666] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.228342] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.228345] software IO TLB: area num 4. [ 0.284378] Memory: 390892K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 133140K reserved, 0K cma-reserved) [ 0.284550] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.286743] Dynamic Preempt: voluntary [ 0.286825] rcu: Preemptible hierarchical RCU implementation. [ 0.286826] rcu: RCU event tracing is enabled. [ 0.286827] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.286828] Trampoline variant of Tasks RCU enabled. [ 0.286829] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.286830] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.297446] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.297563] xen:events: Using FIFO-based ABI [ 0.297586] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.297595] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.297603] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.297611] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.297619] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.297627] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.297635] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.297642] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.297650] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.297658] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.297666] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.297674] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.297683] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.297691] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.297699] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.297709] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.303005] Console: colour VGA+ 80x25 [ 0.317928] printk: console [tty0] enabled [ 0.319151] printk: console [hvc0] enabled [ 0.319265] ACPI: Core revision 20220331 [ 0.323885] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.324041] Xen: using vcpuop timer interface [ 0.324046] installing Xen timer for CPU 0 [ 0.324188] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns [ 0.324343] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092974) [ 0.324644] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.324759] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.324885] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.325084] Spectre V2 : Mitigation: Retpolines [ 0.325349] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.325494] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.325613] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.325733] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.325879] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.325996] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.326142] MDS: Mitigation: Clear CPU buffers [ 0.326254] MMIO Stale Data: Unknown: No mitigations [ 0.326367] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.326548] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.326666] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.326783] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.326900] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.341458] Freeing SMP alternatives memory: 40K [ 0.342348] pid_max: default: 32768 minimum: 301 [ 0.342474] LSM: Security Framework initializing [ 0.342592] SELinux: Initializing. [ 0.342726] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.342869] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.343338] cpu 0 spinlock event irq 25 [ 0.343501] VPMU disabled by hypervisor. [ 0.343986] cblist_init_generic: Setting adjustable number of callback queues. [ 0.344129] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.344292] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.344348] signal: max sigframe size: 1776 [ 0.344516] rcu: Hierarchical SRCU implementation. [ 0.344630] rcu: Max phase no-delay instances is 400. [ 0.345112] smp: Bringing up secondary CPUs ... [ 0.345482] installing Xen timer for CPU 1 [ 0.345935] cpu 1 spinlock event irq 35 [ 0.346564] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.347379] installing Xen timer for CPU 2 [ 0.347908] cpu 2 spinlock event irq 41 [ 0.348370] installing Xen timer for CPU 3 [ 0.348911] cpu 3 spinlock event irq 47 [ 0.348911] smp: Brought up 1 node, 4 CPUs [ 0.349348] smpboot: Max logical packages: 1 [ 0.349537] devtmpfs: initialized [ 0.349537] x86/mm: Memory block size: 128MB [ 0.349819] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.352714] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.352965] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.353116] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.353346] PM: RTC time: 03:16:48, date: 2024-04-24 [ 0.353604] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.353746] xen:grant_table: Grant tables using version 1 layout [ 0.353885] Grant table initialized [ 0.354092] audit: initializing netlink subsys (disabled) [ 0.354358] audit: type=2000 audit(1713928609.182:1): state=initialized audit_enabled=0 res=1 [ 0.354419] thermal_sys: Registered thermal governor 'step_wise' [ 0.354419] thermal_sys: Registered thermal governor 'user_space' [ 0.354533] Simple Boot Flag at 0x4f set to 0x1 [ 0.354779] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.355050] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.355351] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.390496] PCI: Using configuration type 1 for base access [ 0.392499] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.392641] ACPI: Added _OSI(Module Device) [ 0.392641] ACPI: Added _OSI(Processor Device) [ 0.392641] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.393349] ACPI: Added _OSI(Processor Aggregator Device) [ 0.400005] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.400710] xen: registering gsi 9 triggering 0 polarity 0 [ 0.401121] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.402899] ACPI: Dynamic OEM Table Load: [ 0.403019] ACPI: SSDT 0xFFFF88800351B000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.403809] ACPI: Dynamic OEM Table Load: [ 0.403924] ACPI: SSDT 0xFFFF888003589C00 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.404507] ACPI: Dynamic OEM Table Load: [ 0.404622] ACPI: SSDT 0xFFFF88800354FC00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.405795] ACPI: Interpreter enabled [ 0.405924] ACPI: PM: (supports S0 S1 S3 S5) [ 0.406037] ACPI: Using IOAPIC for interrupt routing [ 0.406175] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.406323] PCI: Using E820 reservations for host bridge windows [ 0.406583] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.412815] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.415175] ACPI: PM: Power Resource [FN00] [ 0.415349] ACPI: PM: Power Resource [FN01] [ 0.415517] ACPI: PM: Power Resource [FN02] [ 0.415683] ACPI: PM: Power Resource [FN03] [ 0.415848] ACPI: PM: Power Resource [FN04] [ 0.416713] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.416837] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.417457] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.418122] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.418243] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.418893] PCI host bridge to bus 0000:00 [ 0.419006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.419127] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.419247] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.419348] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.419491] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.419634] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.419777] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.419988] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 0.420622] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.420812] pci 0000:00:19.0: reg 0x10: [mem 0xc1b00000-0xc1b1ffff] [ 0.420969] pci 0000:00:19.0: reg 0x14: [mem 0xc1b70000-0xc1b70fff] [ 0.421126] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] [ 0.421604] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.421937] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.422133] pci 0000:00:1a.0: reg 0x10: [mem 0xc1b60000-0xc1b603ff] [ 0.422655] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.423035] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.423598] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.423803] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.423923] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.424273] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.424790] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.424992] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.425110] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.425477] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.425668] pci 0000:00:1d.0: reg 0x10: [mem 0xc1b50000-0xc1b503ff] [ 0.426190] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.426510] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.427136] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 [ 0.427872] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.428063] pci 0000:00:1f.2: reg 0x10: [io 0x4090-0x4097] [ 0.428255] pci 0000:00:1f.2: reg 0x14: [io 0x4080-0x4083] [ 0.428387] pci 0000:00:1f.2: reg 0x18: [io 0x4070-0x4077] [ 0.428540] pci 0000:00:1f.2: reg 0x1c: [io 0x4060-0x4063] [ 0.428694] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f] [ 0.428848] pci 0000:00:1f.2: reg 0x24: [mem 0xc1b40000-0xc1b407ff] [ 0.429199] pci 0000:00:1f.2: PME# supported from D3hot [ 0.429540] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.429751] pci 0000:00:1f.3: reg 0x10: [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.429984] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f] [ 0.430462] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.430588] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.430717] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.430904] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.431293] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 0.431442] pci 0000:02:00.0: reg 0x10: [mem 0xc1a00000-0xc1a1ffff] [ 0.431664] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] [ 0.431831] pci 0000:02:00.0: reg 0x1c: [mem 0xc1a20000-0xc1a23fff] [ 0.432482] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.433008] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.433134] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.433262] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.433458] pci_bus 0000:03: extended config space not accessible [ 0.433686] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 [ 0.433875] pci 0000:03:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 0.434261] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.434454] pci 0000:03:02.0: supports D1 D2 [ 0.434811] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.435008] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.435149] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.435296] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.435347] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.435496] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.435644] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.435790] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.436022] pci_bus 0000:00: on NUMA node 0 [ 0.436241] xen: registering gsi 13 triggering 1 polarity 0 [ 0.436738] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.436928] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.437113] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.437231] ACPI: PCI: Interrupt link LNKC disabled [ 0.437416] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.437658] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.437843] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.438028] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.438212] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.438330] ACPI: PCI: Interrupt link LNKH disabled [ 0.438654] xen:balloon: Initialising balloon driver [ 0.438834] iommu: Default domain type: Translated [ 0.439348] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.439512] SCSI subsystem initialized [ 0.439637] libata version 3.00 loaded. [ 0.439637] ACPI: bus type USB registered [ 0.439637] usbcore: registered new interface driver usbfs [ 0.439637] usbcore: registered new interface driver hub [ 0.439746] usbcore: registered new device driver usb [ 0.439873] pps_core: LinuxPPS API ver. 1 registered [ 0.440348] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.440497] PTP clock support registered [ 0.440628] Advanced Linux Sound Architecture Driver Initialized. [ 0.440628] NetLabel: Initializing [ 0.440725] NetLabel: domain hash size = 128 [ 0.440837] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.441363] NetLabel: unlabeled traffic allowed by default [ 0.441499] PCI: Using ACPI for IRQ routing [ 0.452291] PCI: pci_cache_line_size set to 64 bytes [ 0.452431] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.452433] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.452454] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.452530] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.452646] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.452793] vgaarb: loaded [ 0.455308] clocksource: Switched to clocksource tsc-early [ 0.455308] VFS: Disk quotas dquot_6.6.0 [ 0.455308] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.455308] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.455308] pnp: PnP ACPI init [ 0.455308] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.455339] system 00:00: [io 0xffff] has been reserved [ 0.455454] system 00:00: [io 0xffff] has been reserved [ 0.455529] system 00:00: [io 0xffff] has been reserved [ 0.455529] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.455529] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.455529] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.455529] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.455529] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.455529] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.456509] xen: registering gsi 8 triggering 1 polarity 0 [ 0.456589] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.456993] xen: registering gsi 4 triggering 1 polarity 0 [ 0.456997] Already setup the GSI :4 [ 0.457512] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.457635] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.457754] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.457874] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.457994] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.458115] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.458233] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.458365] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.458485] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.458605] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.458725] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.459104] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.459271] pnp: PnP ACPI: found 6 devices [ 0.486626] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.486797] NET: Registered PF_INET protocol family [ 0.486955] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.487276] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.487436] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.487601] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.487830] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.487989] TCP: Hash tables configured (established 4096 bind 4096) [ 0.488125] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.488246] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.488402] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.488736] RPC: Registered named UNIX socket transport module. [ 0.488860] RPC: Registered udp transport module. [ 0.488974] RPC: Registered tcp transport module. [ 0.489086] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.489486] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.489609] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.489745] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.489876] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.490042] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.490161] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.490296] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.490458] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.490640] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.490793] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.490912] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.491029] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.491150] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.491269] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.491398] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.491519] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.491633] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.491751] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.491943] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.492058] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.492176] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.492295] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.492420] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.492538] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.492657] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.492776] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.492895] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.493129] xen: registering gsi 22 triggering 0 polarity 1 [ 0.493150] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.515439] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 21840 usecs [ 0.515659] xen: registering gsi 20 triggering 0 polarity 1 [ 0.515675] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.537483] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 21356 usecs [ 0.537686] PCI: CLS 64 bytes, default 64 [ 0.537805] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.537872] Unpacking initramfs... [ 0.537922] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.538277] kvm: no hardware support for 'kvm_intel' [ 0.538462] has_svm: not amd or hygon [ 0.538572] kvm: no hardware support for 'kvm_amd' [ 0.538691] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns [ 0.538912] clocksource: Switched to clocksource tsc [ 0.540269] Initialise system trusted keyrings [ 0.540506] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.541660] NFS: Registering the id_resolver key type [ 0.541784] Key type id_resolver registered [ 0.541895] Key type id_legacy registered [ 0.542065] 9p: Installing v9fs 9p2000 file system support [ 0.552212] Key type asymmetric registered [ 0.552337] Asymmetric key parser 'x509' registered [ 0.552479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.552644] io scheduler mq-deadline registered [ 0.552759] io scheduler kyber registered [ 0.553556] xen: registering gsi 16 triggering 0 polarity 1 [ 0.553582] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.553826] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.554189] xen: registering gsi 16 triggering 0 polarity 1 [ 0.554193] Already setup the GSI :16 [ 0.554485] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.554914] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.555265] ACPI: button: Sleep Button [SLPB] [ 0.555408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.555616] ACPI: button: Power Button [PWRF] [ 0.556100] Monitor-Mwait will be used to enter C-1 state [ 0.556140] Monitor-Mwait will be used to enter C-3 state [ 0.556159] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.556468] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.556800] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.557331] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.557930] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.558050] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.558357] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.558476] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.558863] xen:xen_evtchn: Event-channel device installed [ 0.559050] xen_pciback: backend is vpci [ 0.559790] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.560486] hpet_acpi_add: no address or irqs in _CRS [ 0.560676] Non-volatile memory driver v1.3 [ 0.560788] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.562619] loop: module loaded [ 0.567408] ahci 0000:00:1f.2: version 3.0 [ 0.567500] xen: registering gsi 21 triggering 0 polarity 1 [ 0.567525] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.577841] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.577997] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.593334] scsi host0: ahci [ 0.593849] scsi host1: ahci [ 0.594255] scsi host2: ahci [ 0.594618] scsi host3: ahci [ 0.594958] scsi host4: ahci [ 0.595288] scsi host5: ahci [ 0.595438] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 [ 0.595584] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 [ 0.595745] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 [ 0.595890] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 [ 0.596035] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 [ 0.596178] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 [ 0.596516] tun: Universal TUN/TAP device driver, 1.6 [ 0.596717] e100: Intel(R) PRO/100 Network Driver [ 0.596832] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.596955] sky2: driver version 1.30 [ 0.597092] xen_netfront: Initialising Xen virtual ethernet driver [ 0.606041] xen: registering gsi 22 triggering 0 polarity 1 [ 0.606048] Already setup the GSI :22 [ 0.606227] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.606445] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.606623] ehci-pci 0000:00:1a.0: debug port 2 [ 0.610785] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.618662] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.618886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.619033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.619176] usb usb1: Product: EHCI Host Controller [ 0.619291] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.619406] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.619754] hub 1-0:1.0: USB hub found [ 0.619887] hub 1-0:1.0: 2 ports detected [ 0.620295] xen: registering gsi 20 triggering 0 polarity 1 [ 0.620306] Already setup the GSI :20 [ 0.620486] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.620714] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.620893] ehci-pci 0000:00:1d.0: debug port 2 [ 0.621751] Freeing initrd memory: 19884K [ 0.625062] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.631679] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.631900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.632047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632189] usb usb2: Product: EHCI Host Controller [ 0.632303] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.632418] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.632753] hub 2-0:1.0: USB hub found [ 0.632882] hub 2-0:1.0: 2 ports detected [ 0.633199] usbcore: registered new interface driver usblp [ 0.633328] usbcore: registered new interface driver usb-storage [ 0.633474] i8042: PNP: No PS/2 controller found. [ 0.633912] rtc_cmos 00:01: RTC can wake from S4 [ 0.634608] rtc_cmos 00:01: registered as rtc0 [ 0.634794] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.634969] device-mapper: uevent: version 1.0.3 [ 0.635029] xen: registering gsi 22 triggering 0 polarity 1 [ 0.635087] Already setup the GSI :22 [ 0.635179] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.635262] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.635351] intel_pstate: CPU model not supported [ 0.635589] hid: raw HID events driver (C) Jiri Kosina [ 0.635820] usbcore: registered new interface driver usbhid [ 0.635939] usbhid: USB HID core driver [ 0.636361] Initializing XFRM netlink socket [ 0.636564] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.636583] NET: Registered PF_INET6 protocol family [ 0.637187] Segment Routing with IPv6 [ 0.637284] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.637310] In-situ OAM (IOAM) with IPv6 [ 0.637559] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.637798] NET: Registered PF_PACKET protocol family [ 0.637947] 9pnet: Installing 9P2000 support [ 0.638081] Key type dns_resolver registered [ 0.638508] IPI shorthand broadcast: enabled [ 0.638658] sched_clock: Marking stable (612005818, 26630376)->(657572375, -18936181) [ 0.639085] registered taskstats version 1 [ 0.639197] Loading compiled-in X.509 certificates [ 0.641433] PM: Magic number: 4:825:260 [ 0.641605] printk: console [netcon0] enabled [ 0.641731] netconsole: network logging started [ 0.642053] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.653555] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.653932] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.654521] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.654655] ALSA device list: [ 0.654791] No soundcards found. [ 0.862706] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.870702] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.907398] ata2: SATA link down (SStatus 0 SControl 300) [ 0.907548] ata5: SATA link down (SStatus 0 SControl 300) [ 0.907704] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.907845] ata6: SATA link down (SStatus 0 SControl 300) [ 0.907984] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.908118] ata4: SATA link down (SStatus 0 SControl 300) [ 0.909303] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.909901] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.911429] ata1.00: configured for UDMA/133 [ 0.911618] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.911767] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.912572] ata3.00: configured for UDMA/100 [ 0.912972] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.913040] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.913255] sd 0:0:0:0: [sda] Write Protect is off [ 0.913371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.913404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.913600] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.925765] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.938566] sda: sda1 sda2 < sda5 > [ 0.939157] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.976318] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.976523] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.991450] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.991601] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.992073] hub 1-1:1.0: USB hub found [ 0.992436] hub 1-1:1.0: 6 ports detected [ 0.999442] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.999593] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.000029] hub 2-1:1.0: USB hub found [ 1.000235] hub 2-1:1.0: 6 ports detected [ 1.003898] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.003983] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.005246] Freeing unused kernel image (initmem) memory: 1580K [ 1.005367] Write protecting the kernel read-only data: 22528k [ 1.024913] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.026091] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.192038] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.192161] Run /init as init process [ 1.192270] with arguments: [ 1.192271] /init [ 1.192272] placeholder [ 1.192273] with environment: [ 1.192273] HOME=/ [ 1.192274] TERM=linux [ 1.535220] e1000e: Intel(R) PRO/1000 Network Driver [ 1.535346] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.535561] xen: registering gsi 19 triggering 0 polarity 1 [ 1.535590] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.535896] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.643123] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.740190] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.740343] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.740512] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.740760] xen: registering gsi 16 triggering 0 polarity 1 [ 1.740767] Already setup the GSI :16 [ 1.741182] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.784674] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.831179] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.831331] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.831535] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.833801] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.853055] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.971642] random: crng init done [ 2.876475] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.881680] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.315596] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 8.085818] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.098314] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 8.183268] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.979045] xenbr0: port 1(enx001e6796a416) entered blocking state [ 9.979244] xenbr0: port 1(enx001e6796a416) entered disabled state [ 9.979400] device enx001e6796a416 entered promiscuous mode [ 12.491787] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.492352] IPv6: ADDRCONF(NETDEV_CHANGE): enx001e6796a416: link becomes ready [ 12.492514] xenbr0: port 1(enx001e6796a416) entered blocking state [ 12.492645] xenbr0: port 1(enx001e6796a416) entered forwarding state [ 12.492876] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready