[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-20-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.939 MHz processor [ 0.000894] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001051] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001700] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001710] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018733] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018759] Using GB pages for direct mapping [ 0.019039] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019047] ACPI: Early table checksum verification disabled [ 0.019051] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019057] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019066] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019074] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019079] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019084] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019089] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019094] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019099] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019104] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019109] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019114] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019120] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019125] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019130] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019135] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019140] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019144] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019146] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019148] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019149] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019150] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019152] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019153] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019154] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019156] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019157] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019159] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019160] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019161] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019163] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019164] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019234] No NUMA configuration found [ 0.019235] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019251] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019785] Zone ranges: [ 0.019786] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019789] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019792] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019794] Device empty [ 0.019795] Movable zone start for each node [ 0.019800] Early memory node ranges [ 0.019800] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019803] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019805] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019808] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019816] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019872] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028003] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028298] ACPI: PM-Timer IO Port: 0x408 [ 0.028311] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028313] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028314] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028316] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028328] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028334] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028338] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028341] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028348] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028349] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028356] TSC deadline timer available [ 0.028358] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028378] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028381] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028383] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028384] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028385] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028387] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028389] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028390] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028391] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028392] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028394] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028395] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028396] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028397] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028398] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028400] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028402] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028404] Booting paravirtualized kernel on bare hardware [ 0.028408] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035761] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036158] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036166] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036170] pcpu-alloc: [0] 0 1 2 3 [ 0.036210] Fallback order for Node 0: 0 [ 0.036215] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036217] Policy zone: Normal [ 0.036219] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036288] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64", will be passed to user space. [ 0.036318] random: crng init done [ 0.037363] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037934] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038022] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038034] software IO TLB: area num 4. [ 0.080039] Memory: 2087172K/8353556K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2800K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080254] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080276] Kernel/User page tables isolation: enabled [ 0.080328] ftrace: allocating 40211 entries in 158 pages [ 0.090699] ftrace: allocated 158 pages with 5 groups [ 0.091642] Dynamic Preempt: voluntary [ 0.091687] rcu: Preemptible hierarchical RCU implementation. [ 0.091688] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091690] Trampoline variant of Tasks RCU enabled. [ 0.091691] Rude variant of Tasks RCU enabled. [ 0.091692] Tracing variant of Tasks RCU enabled. [ 0.091693] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091694] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.099018] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099226] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103807] Console: colour VGA+ 80x25 [ 1.028225] printk: console [ttyS0] enabled [ 1.032432] ACPI: Core revision 20220331 [ 1.037082] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046222] APIC: Switch to symmetric I/O mode setup [ 1.051203] DMAR: Host address width 46 [ 1.055052] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060378] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068300] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074569] DMAR: ATSR flags: 0x0 [ 1.077888] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.084162] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090524] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096885] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102292] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111424] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116819] x2apic enabled [ 1.119549] Switched APIC routing to cluster x2apic. [ 1.125058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150225] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f1eff8454, max_idle_ns: 440795203083 ns [ 1.160741] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.87 BogoMIPS (lpj=7199756) [ 1.164771] CPU0: Thermal monitoring enabled (TM1) [ 1.168824] process: using mwait in idle threads [ 1.172741] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176738] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180741] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184740] Spectre V2 : Mitigation: Retpolines [ 1.188738] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192738] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196738] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200740] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204739] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208739] MDS: Mitigation: Clear CPU buffers [ 1.212738] MMIO Stale Data: Unknown: No mitigations [ 1.216743] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220738] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224738] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228739] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232738] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261314] Freeing SMP alternatives memory: 36K [ 1.264739] pid_max: default: 32768 minimum: 301 [ 1.268772] LSM: Security Framework initializing [ 1.272756] landlock: Up and running. [ 1.276738] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280769] AppArmor: AppArmor initialized [ 1.284740] TOMOYO Linux initialized [ 1.288745] LSM support for eBPF active [ 1.292784] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296754] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.305303] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308928] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312739] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316770] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320739] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324761] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328738] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332760] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336740] ... version: 3 [ 1.340738] ... bit width: 48 [ 1.344738] ... generic registers: 8 [ 1.348738] ... value mask: 0000ffffffffffff [ 1.352738] ... max period: 00007fffffffffff [ 1.356738] ... fixed-purpose events: 3 [ 1.360738] ... event mask: 00000007000000ff [ 1.364972] signal: max sigframe size: 1776 [ 1.368763] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372772] rcu: Hierarchical SRCU implementation. [ 1.376739] rcu: Max phase no-delay instances is 1000. [ 1.381414] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384832] smp: Bringing up secondary CPUs ... [ 1.388888] x86: Booting SMP configuration: [ 1.392743] .... node #0, CPUs: #1 #2 #3 [ 1.407887] smp: Brought up 1 node, 4 CPUs [ 1.412740] smpboot: Max logical packages: 1 [ 1.416739] smpboot: Total of 4 processors activated (14399.51 BogoMIPS) [ 1.441228] node 0 deferred pages initialised in 20ms [ 1.445183] devtmpfs: initialized [ 1.448819] x86/mm: Memory block size: 128MB [ 1.453791] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456790] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464751] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468799] pinctrl core: initialized pinctrl subsystem [ 1.473636] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.477017] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480891] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484891] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488748] audit: initializing netlink subsys (disabled) [ 1.492754] audit: type=2000 audit(1713936978.404:1): state=initialized audit_enabled=0 res=1 [ 1.492888] thermal_sys: Registered thermal governor 'fair_share' [ 1.496742] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500739] thermal_sys: Registered thermal governor 'step_wise' [ 1.504738] thermal_sys: Registered thermal governor 'user_space' [ 1.508738] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512756] cpuidle: using governor ladder [ 1.520743] cpuidle: using governor menu [ 1.524713] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524740] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528842] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532741] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536748] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.541198] PCI: Using configuration type 1 for base access [ 1.544837] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.550075] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552800] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556741] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564741] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572739] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.577053] ACPI: Added _OSI(Module Device) [ 1.580741] ACPI: Added _OSI(Processor Device) [ 1.584739] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592739] ACPI: Added _OSI(Processor Aggregator Device) [ 1.721412] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.750341] ACPI: Interpreter enabled [ 1.752760] ACPI: PM: (supports S0 S1 S4 S5) [ 1.756739] ACPI: Using IOAPIC for interrupt routing [ 1.764846] HEST: Table parsing has been initialized. [ 1.768866] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.772743] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.784738] PCI: Using E820 reservations for host bridge windows [ 1.789294] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.796850] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.800742] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.804747] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.804894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.808737] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.820836] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.828898] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.836739] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.845103] PCI host bridge to bus 0000:00 [ 1.848741] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.856739] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.864739] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.868739] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.876739] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.884739] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.892739] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.900739] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.908739] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.912769] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.916823] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.924864] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.932839] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.936907] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.944837] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.948906] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.956777] pci 0000:00:03.0: enabling Extended Tags [ 1.960804] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.968894] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.972756] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.980885] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.984755] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.992875] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 2.000755] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 2.004874] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.012755] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.016876] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.024755] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.032873] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.036755] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.044876] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.048758] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.056875] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.064755] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.068873] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.076869] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.080865] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.088750] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.096889] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.100859] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.108883] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.112759] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.120814] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.124831] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.132758] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.140813] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.144842] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.152755] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.156830] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.164845] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.168838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.176768] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.180740] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.188844] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.192839] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.200763] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.204740] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.212867] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.216755] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.224830] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.228843] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.236885] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.240956] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.248752] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.252745] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.260745] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.264745] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.272745] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.276745] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.284783] pci 0000:00:1f.2: PME# supported from D3hot [ 2.288829] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.292756] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.300762] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.304815] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.312759] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.320901] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.324790] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.328789] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.332822] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.340761] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.348753] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.356748] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.360765] pci 0000:04:00.0: enabling Extended Tags [ 2.364845] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.372739] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.384995] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.388742] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.392747] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.400836] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.408774] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.416776] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.420757] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.424928] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.432962] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.436742] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.444741] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.452839] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.456774] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.464776] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.468757] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.476924] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.480954] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.484742] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.492741] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.500761] pci_bus 0000:07: extended config space not accessible [ 2.504764] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.512755] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.516747] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.524747] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.532785] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.540851] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.544743] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.552745] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.560739] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.568739] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.576739] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.584739] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.596739] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.604739] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.612739] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.620739] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.633542] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.636743] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.648758] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.656739] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.664807] PCI host bridge to bus 0000:ff [ 2.668740] pci_bus 0000:ff: root bus resource [bus ff] [ 2.672752] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.680819] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.684808] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.692803] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.696798] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.704800] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.712805] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.716796] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.724797] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.728798] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.736800] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.740796] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.748800] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.752802] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.760815] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.764827] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.772822] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.776822] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.784822] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.788820] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.796823] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.800822] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.808834] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.812823] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.820821] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.824823] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.832823] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.836821] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.844820] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.848799] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.856804] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.864800] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.868802] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.876799] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.880797] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.888959] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.892794] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.900792] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.904791] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.912828] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.916791] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.924791] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.928791] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.938424] iommu: Default domain type: Translated [ 2.940739] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.948840] pps_core: LinuxPPS API ver. 1 registered [ 2.952739] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.960741] PTP clock support registered [ 2.964680] EDAC MC: Ver: 3.0.0 [ 2.968998] NetLabel: Initializing [ 2.972403] NetLabel: domain hash size = 128 [ 2.976741] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.984761] NetLabel: unlabeled traffic allowed by default [ 2.988739] PCI: Using ACPI for IRQ routing [ 2.999738] PCI: pci_cache_line_size set to 64 bytes [ 2.999863] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.999866] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 3.000776] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 3.004737] pci 0000:07:01.0: vgaarb: bridge control possible [ 3.004737] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.020746] vgaarb: loaded [ 3.025276] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.032739] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.040737] clocksource: Switched to clocksource tsc-early [ 3.046435] VFS: Disk quotas dquot_6.6.0 [ 3.050385] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.057453] AppArmor: AppArmor Filesystem Enabled [ 3.062193] pnp: PnP ACPI init [ 3.065403] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.072020] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.078630] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.085242] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.091985] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.099087] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.105014] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.112299] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.118423] pnp 00:07: [dma 0 disabled] [ 3.118666] pnp 00:08: [dma 0 disabled] [ 3.118953] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.124880] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.130797] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.136716] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.142637] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.149247] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.156209] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.162930] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.169138] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.176384] pnp: PnP ACPI: found 12 devices [ 3.187097] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.196062] NET: Registered PF_INET protocol family [ 3.201123] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.211462] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.220036] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.227868] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.236168] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.243964] TCP: Hash tables configured (established 65536 bind 65536) [ 3.250588] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.258141] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.264970] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.272266] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.277937] NET: Registered PF_XDP protocol family [ 3.282749] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.287721] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.292695] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.297670] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.302638] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.308735] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.316487] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.321454] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.327550] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.334339] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.339308] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.345404] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.352196] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.357164] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.363949] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.371691] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.377875] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.384054] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.390235] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.396413] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.403286] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.410160] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.417120] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.424079] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.429651] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.436871] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.442446] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.448711] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.454284] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.460550] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.466816] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.474036] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.480214] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.486395] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.492573] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.498754] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.505625] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.512500] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.519460] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.526514] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.557596] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23453 usecs [ 3.589582] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23995 usecs [ 3.597089] PCI: CLS 64 bytes, default 64 [ 3.601140] DMAR: No SATC found [ 3.601197] Trying to unpack rootfs image as initramfs... [ 3.604284] DMAR: dmar0: Using Queued invalidation [ 3.604363] pci 0000:00:00.0: Adding to iommu group 0 [ 3.619599] pci 0000:00:01.0: Adding to iommu group 1 [ 3.624676] pci 0000:00:01.1: Adding to iommu group 2 [ 3.629763] pci 0000:00:03.0: Adding to iommu group 3 [ 3.634847] pci 0000:00:04.0: Adding to iommu group 4 [ 3.639921] pci 0000:00:04.1: Adding to iommu group 5 [ 3.645004] pci 0000:00:04.2: Adding to iommu group 6 [ 3.650084] pci 0000:00:04.3: Adding to iommu group 7 [ 3.655170] pci 0000:00:04.4: Adding to iommu group 8 [ 3.660247] pci 0000:00:04.5: Adding to iommu group 9 [ 3.665327] pci 0000:00:04.6: Adding to iommu group 10 [ 3.670492] pci 0000:00:04.7: Adding to iommu group 11 [ 3.675658] pci 0000:00:05.0: Adding to iommu group 12 [ 3.680825] pci 0000:00:05.2: Adding to iommu group 13 [ 3.685990] pci 0000:00:05.4: Adding to iommu group 14 [ 3.691154] pci 0000:00:11.0: Adding to iommu group 15 [ 3.696342] pci 0000:00:16.0: Adding to iommu group 16 [ 3.701511] pci 0000:00:16.1: Adding to iommu group 16 [ 3.706688] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.711856] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.717030] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.722198] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.727365] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.732575] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.737739] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.742906] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.748069] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.753247] pci 0000:04:00.0: Adding to iommu group 23 [ 3.758410] pci 0000:05:00.0: Adding to iommu group 24 [ 3.763575] pci 0000:06:00.0: Adding to iommu group 25 [ 3.768723] pci 0000:07:01.0: Adding to iommu group 21 [ 3.773909] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.779092] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.784305] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.789485] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.794658] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.799827] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.805024] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.810193] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.815383] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.820557] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.825757] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.830928] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.836118] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.841291] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.846463] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.851633] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.856799] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.861968] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.867140] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.872302] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.877474] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.882647] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.887819] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.892985] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.898149] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.903330] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.908500] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.913663] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.918873] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.924048] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.929219] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.934393] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.939598] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.944775] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.949952] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.958995] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.965448] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.971888] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.980372] Initialise system trusted keyrings [ 3.984835] Key type blacklist registered [ 3.988933] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.997239] zbud: loaded [ 4.000096] integrity: Platform Keyring initialized [ 4.004989] integrity: Machine keyring initialized [ 4.009781] Key type asymmetric registered [ 4.013880] Asymmetric key parser 'x509' registered [ 4.044683] Freeing initrd memory: 39592K [ 4.056152] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.061944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.069383] io scheduler mq-deadline registered [ 4.076355] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.083177] Monitor-Mwait will be used to enter C-1 state [ 4.083191] Monitor-Mwait will be used to enter C-2 state [ 4.083197] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.093347] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.100831] pstore: Registered erst as persistent store backend [ 4.106901] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.113335] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.121446] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.129688] Linux agpgart interface v0.103 [ 4.133912] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.143080] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.149962] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.159546] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.164519] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.169768] mousedev: PS/2 mouse device common for all mice [ 4.175387] rtc_cmos 00:02: RTC can wake from S4 [ 4.180310] rtc_cmos 00:02: registered as rtc0 [ 4.184794] rtc_cmos 00:02: setting system clock to 2024-04-24T05:36:22 UTC (1713936982) [ 4.192926] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.200753] intel_pstate: Intel P-state driver initializing [ 4.206654] ledtrig-cpu: registered to indicate activity on CPUs [ 4.230471] NET: Registered PF_INET6 protocol family [ 4.243133] Segment Routing with IPv6 [ 4.246827] In-situ OAM (IOAM) with IPv6 [ 4.250792] mip6: Mobile IPv6 [ 4.253768] NET: Registered PF_PACKET protocol family [ 4.258910] mpls_gso: MPLS GSO support [ 4.263190] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.268737] microcode: Microcode Update Driver: v2.2. [ 4.268746] IPI shorthand broadcast: enabled [ 4.278105] sched_clock: Marking stable (3288594523, 989477985)->(4646645416, -368572908) [ 4.286552] registered taskstats version 1 [ 4.290666] Loading compiled-in X.509 certificates [ 4.334847] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.343576] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.354247] zswap: loaded using pool lzo/zbud [ 4.358840] Key type .fscrypt registered [ 4.362773] Key type fscrypt-provisioning registered [ 4.368046] pstore: Using crash dump compression: deflate [ 4.379870] Key type encrypted registered [ 4.383905] AppArmor: AppArmor sha1 policy hashing enabled [ 4.389408] ima: No TPM chip found, activating TPM-bypass! [ 4.394890] ima: Allocated hash algorithm: sha256 [ 4.399607] ima: No architecture policies found [ 4.404149] evm: Initialising EVM extended attributes: [ 4.409284] evm: security.selinux [ 4.412603] evm: security.SMACK64 (disabled) [ 4.416877] evm: security.SMACK64EXEC (disabled) [ 4.421494] evm: security.SMACK64TRANSMUTE (disabled) [ 4.426548] evm: security.SMACK64MMAP (disabled) [ 4.431167] evm: security.apparmor [ 4.434574] evm: security.ima [ 4.437547] evm: security.capability [ 4.441123] evm: HMAC attrs: 0x1 [ 4.622973] Freeing unused decrypted memory: 2036K [ 4.628454] Freeing unused kernel image (initmem) memory: 2800K [ 4.634453] Write protecting the kernel read-only data: 26624k [ 4.641037] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.647987] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 4.740699] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.747143] x86/mm: Checking user space page tables [ 4.826417] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.832864] Run /init as init process [ 4.836526] with arguments: [ 4.836528] /init [ 4.836530] with environment: [ 4.836531] HOME=/ [ 4.836532] TERM=linux [ 4.836533] BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 [ 4.993502] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999696] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.010086] clocksource: Switched to clocksource tsc [ 5.057710] SCSI subsystem initialized [ 5.062712] e1000e: Intel(R) PRO/1000 Network Driver [ 5.067724] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.073899] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.089882] ACPI: bus type USB registered [ 5.090890] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.093945] usbcore: registered new interface driver usbfs [ 5.101845] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.109541] usbcore: registered new interface driver hub [ 5.110905] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.116302] usbcore: registered new device driver usb [ 5.145202] libata version 3.00 loaded. [ 5.145587] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.158149] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.163456] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.163696] ahci 0000:00:1f.2: version 3.0 [ 5.170871] ehci-pci 0000:00:1a.0: debug port 2 [ 5.174848] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.185728] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.193502] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.193914] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.199727] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.205827] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.205832] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.205915] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.206170] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.246694] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.253915] usb usb1: Product: EHCI Host Controller [ 5.258801] usb usb1: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.259819] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.264894] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.277367] hub 1-0:1.0: USB hub found [ 5.277377] scsi host0: ahci [ 5.277599] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.277619] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.281286] hub 1-0:1.0: 2 ports detected [ 5.284619] scsi host1: ahci [ 5.292295] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.296055] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.296059] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.297879] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.297903] scsi host3: ahci [ 5.298354] scsi host4: ahci [ 5.298641] scsi host5: ahci [ 5.298921] scsi host6: ahci [ 5.298982] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.298987] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.298989] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.298992] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.298994] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.298997] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.301770] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.307419] scsi host2: isci [ 5.309889] ehci-pci 0000:00:1d.0: debug port 2 [ 5.331022] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.335945] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.337744] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.337826] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.353501] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.435604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.443873] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.451091] usb usb2: Product: EHCI Host Controller [ 5.455968] usb usb2: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.462060] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.466858] hub 2-0:1.0: USB hub found [ 5.470627] hub 2-0:1.0: 2 ports detected [ 5.561543] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.612400] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.618633] ata2: SATA link down (SStatus 0 SControl 300) [ 5.624069] ata5: SATA link down (SStatus 0 SControl 300) [ 5.629493] ata4: SATA link down (SStatus 0 SControl 300) [ 5.634936] ata3: SATA link down (SStatus 0 SControl 300) [ 5.640403] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.647230] ata6: SATA link down (SStatus 0 SControl 300) [ 5.652906] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.661698] ata1.00: configured for UDMA/133 [ 5.666045] scsi: waiting for bus probes to complete ... [ 5.722268] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.729522] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.730464] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.744842] hub 1-1:1.0: USB hub found [ 5.745684] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.756765] hub 1-1:1.0: 6 ports detected [ 5.762639] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.781827] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.788718] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.796403] sd 0:0:0:0: [sda] Write Protect is off [ 5.801209] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.801230] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.810302] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.838220] sda: sda1 sda2 < sda5 > [ 5.842064] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.890253] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.898448] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.906033] hub 2-1:1.0: USB hub found [ 5.909913] hub 2-1:1.0: 8 ports detected [ 6.057524] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.164029] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.171029] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.176263] device-mapper: uevent: version 1.0.3 [ 6.184555] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.189311] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.196479] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.196482] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.216980] hid: raw HID events driver (C) Jiri Kosina [ 6.228190] usbcore: registered new interface driver usbhid [ 6.233820] usbhid: USB HID core driver [ 6.240006] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.254914] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.269791] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.341786] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.877221] PM: Image not found (code -22) [ 7.296254] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.307783] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.474415] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.246415] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.269548] ACPI: button: Power Button [PWRB] [ 9.274008] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.282336] ACPI: button: Power Button [PWRF] [ 9.441248] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.454839] IPMI message handler: version 39.2 [ 9.462741] ipmi device interface [ 9.561792] dca service started, version 1.12.1 [ 9.598774] ipmi_si: IPMI System Interface driver [ 9.603518] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.609876] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.617104] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.623024] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.629069] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.638008] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.645100] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.659421] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.668133] ipmi_si: Adding ACPI-specified kcs state machine [ 9.673977] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.697857] iTCO_vendor_support: vendor-support=0 [ 9.702843] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.710774] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.716530] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.722196] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.767190] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.806958] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.834598] cryptd: max_cpu_qlen set to 1000 [ 9.838919] ACPI: bus type drm_connector registered [ 9.906292] AVX version of gcm_enc/dec engaged. [ 9.910892] AES CTR mode by8 optimization enabled [ 9.985516] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.997733] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.008713] Console: switching to colour dummy device 80x25 [ 10.020151] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.029331] fbcon: mgag200drmfb (fb0) is primary device [ 10.037328] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.144346] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.209304] ipmi_ssif: IPMI SSIF Interface driver [ 10.402663] Console: switching to colour frame buffer device 128x48 [ 10.510574] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.754750] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.754777] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.754785] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.754793] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.754802] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.754806] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.754814] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.754818] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.754827] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.754830] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.754839] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.754842] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.754851] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.754855] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.754863] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.754867] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.754874] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.754882] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.754890] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.754898] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.754905] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.754913] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.754920] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.754928] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.754938] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.754940] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.754950] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.754952] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.754962] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.755103] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.766165] EDAC sbridge: Ver: 1.1.2 [ 10.842149] intel_rapl_common: Found RAPL domain package [ 10.847486] intel_rapl_common: Found RAPL domain core [ 10.852549] intel_rapl_common: Found RAPL domain dram [ 12.143095] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.550740] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.593889] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.657616] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.237844] audit: type=1400 audit(1713936992.808:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 14.252901] audit: type=1400 audit(1713936992.808:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 14.268293] audit: type=1400 audit(1713936992.808:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 14.295224] audit: type=1400 audit(1713936992.864:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 14.310398] audit: type=1400 audit(1713936992.864:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 14.325349] audit: type=1400 audit(1713936992.864:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 14.510609] audit: type=1400 audit(1713936993.080:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1072 comm="apparmor_parser" [ 14.525917] audit: type=1400 audit(1713936993.084:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.543913] audit: type=1400 audit(1713936993.088:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.561375] audit: type=1400 audit(1713936993.088:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.594585] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.604504] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready