[ 0.000000] Linux version 5.4.274 (osstest@himrod2) (gcc version 12.2.0 (Debian 12.2.0-14)) #1 SMP Wed Apr 24 04:24:41 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/huxelrebe1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020062fff] usable [ 0.000000] Xen: [mem 0x00000000ca2b6000-0x00000000ca2bcfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000ca70a000-0x00000000cab93fff] reserved [ 0.000000] Xen: [mem 0x00000000da6f3000-0x00000000da784fff] reserved [ 0.000000] Xen: [mem 0x00000000da785000-0x00000000da7a8fff] ACPI data [ 0.000000] Xen: [mem 0x00000000da7a9000-0x00000000db4bbfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000db4bc000-0x00000000dbffefff] reserved [ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO ThinkServer RS140/ThinkServer RS140, BIOS FBKT75CUS 03/24/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.047874] tsc: Fast TSC calibration using PIT [ 0.047875] tsc: Detected 3192.384 MHz processor [ 0.047875] tsc: Detected 3192.606 MHz TSC [ 0.053794] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.053795] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.053798] last_pfn = 0x20063 max_arch_pfn = 0x400000000 [ 0.053799] Disabled [ 0.053800] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.053802] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.053832] check: Scanning 1 areas for low memory corruption [ 0.053840] Kernel/User page tables isolation: disabled on XEN PV. [ 0.159542] RAMDISK: [mem 0x04000000-0x05c08fff] [ 0.159545] ACPI: Early table checksum verification disabled [ 0.162229] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO) [ 0.162236] ACPI: XSDT 0x00000000DA78C098 0000B4 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.162261] ACPI: FACP 0x00000000DA7A3758 00010C (v05 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.162295] ACPI: DSDT 0x00000000DA78C1E0 017573 (v02 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.162305] ACPI: FACS 0x00000000DB4BA080 000040 [ 0.162315] ACPI: APIC 0x00000000DA7A3868 000072 (v03 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.162324] ACPI: FPDT 0x00000000DA7A38E0 000044 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.162334] ACPI: TCPA 0x00000000DA7A3928 000032 (v02 LENOVO TC-FB 000014B0 MSFT 01000013) [ 0.162343] ACPI: LPIT 0x00000000DA7A3960 00005C (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.162353] ACPI: SSDT 0x00000000DA7A39C0 000539 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.162363] ACPI: SSDT 0x00000000DA7A3F00 000AD8 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.162373] ACPI: MCFG 0x00000000DA7A49D8 00003C (v01 LENOVO TC-FB 000014B0 MSFT 00000097) [ 0.162382] ACPI: HPET 0x00000000DA7A4A18 000038 (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.162392] ACPI: SSDT 0x00000000DA7A4A50 00036D (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.162402] ACPI: SSDT 0x00000000DA7A4DC0 0034E1 (v01 LENOVO TC-FB 000014B0 INTL 20091112) [ 0.162411] ACPI: ASF! 0x00000000DA7A82A8 0000A5 (v32 LENOVO TC-FB 000014B0 TFSM 000F4240) [ 0.162421] ACPI: RMAD 0x00000000DA7A8350 0000B8 (v01 LENOVO TC-FB 000014B0 INTL 00000001) [ 0.162431] ACPI: EINJ 0x00000000DA7A8408 000130 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.162440] ACPI: ERST 0x00000000DA7A8538 000230 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.162450] ACPI: HEST 0x00000000DA7A8768 0000A8 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.162460] ACPI: BERT 0x00000000DA7A8810 000030 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.162469] ACPI: BGRT 0x00000000DA7A8840 000038 (v00 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.162475] ACPI: Reserving FACP table memory at [mem 0xda7a3758-0xda7a3863] [ 0.162475] ACPI: Reserving DSDT table memory at [mem 0xda78c1e0-0xda7a3752] [ 0.162476] ACPI: Reserving FACS table memory at [mem 0xdb4ba080-0xdb4ba0bf] [ 0.162477] ACPI: Reserving APIC table memory at [mem 0xda7a3868-0xda7a38d9] [ 0.162477] ACPI: Reserving FPDT table memory at [mem 0xda7a38e0-0xda7a3923] [ 0.162478] ACPI: Reserving TCPA table memory at [mem 0xda7a3928-0xda7a3959] [ 0.162479] ACPI: Reserving LPIT table memory at [mem 0xda7a3960-0xda7a39bb] [ 0.162479] ACPI: Reserving SSDT table memory at [mem 0xda7a39c0-0xda7a3ef8] [ 0.162480] ACPI: Reserving SSDT table memory at [mem 0xda7a3f00-0xda7a49d7] [ 0.162480] ACPI: Reserving MCFG table memory at [mem 0xda7a49d8-0xda7a4a13] [ 0.162481] ACPI: Reserving HPET table memory at [mem 0xda7a4a18-0xda7a4a4f] [ 0.162482] ACPI: Reserving SSDT table memory at [mem 0xda7a4a50-0xda7a4dbc] [ 0.162482] ACPI: Reserving SSDT table memory at [mem 0xda7a4dc0-0xda7a82a0] [ 0.162483] ACPI: Reserving ASF! table memory at [mem 0xda7a82a8-0xda7a834c] [ 0.162483] ACPI: Reserving RMAD table memory at [mem 0xda7a8350-0xda7a8407] [ 0.162484] ACPI: Reserving EINJ table memory at [mem 0xda7a8408-0xda7a8537] [ 0.162485] ACPI: Reserving ERST table memory at [mem 0xda7a8538-0xda7a8767] [ 0.162485] ACPI: Reserving HEST table memory at [mem 0xda7a8768-0xda7a880f] [ 0.162486] ACPI: Reserving BERT table memory at [mem 0xda7a8810-0xda7a883f] [ 0.162487] ACPI: Reserving BGRT table memory at [mem 0xda7a8840-0xda7a8877] [ 0.162514] ACPI: Local APIC address 0xfee00000 [ 0.162515] Setting APIC routing to Xen PV. [ 0.162610] Zone ranges: [ 0.162611] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.162612] DMA32 [mem 0x0000000001000000-0x0000000020062fff] [ 0.162613] Normal empty [ 0.162613] Movable zone start for each node [ 0.162614] Early memory node ranges [ 0.162614] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.162615] node 0: [mem 0x0000000000100000-0x0000000020062fff] [ 0.162848] Zeroed struct page in unavailable ranges: 32769 pages [ 0.162849] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020062fff] [ 0.162850] On node 0 totalpages: 131071 [ 0.162851] DMA zone: 64 pages used for memmap [ 0.162851] DMA zone: 21 pages reserved [ 0.162852] DMA zone: 3996 pages, LIFO batch:0 [ 0.162889] DMA32 zone: 1986 pages used for memmap [ 0.162890] DMA32 zone: 127075 pages, LIFO batch:31 [ 0.163973] p2m virtual area at (____ptrval____), size is 40000000 [ 0.278786] Remapped 99 page(s) [ 0.279129] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ 0.279462] ACPI: PM-Timer IO Port: 0x1808 [ 0.279467] ACPI: Local APIC address 0xfee00000 [ 0.279492] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.279515] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.279523] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.279525] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.279528] ACPI: IRQ0 used by override. [ 0.279528] ACPI: IRQ9 used by override. [ 0.279534] Using ACPI (MADT) for SMP configuration information [ 0.279538] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.279547] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.279559] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.279560] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.279561] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.279562] [mem 0x20063000-0xca2b5fff] available for PCI devices [ 0.279565] Booting paravirtualized kernel on Xen [ 0.279566] Xen version: 4.19-unstable (preserve-AD) [ 0.279568] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.343118] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.343278] percpu: Embedded 56 pages/cpu s192088 r8192 d29096 u524288 [ 0.343282] pcpu-alloc: s192088 r8192 d29096 u524288 alloc=1*2097152 [ 0.343283] pcpu-alloc: [0] 0 1 2 3 [ 0.343325] xen: PV spinlocks enabled [ 0.343328] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.343330] Built 1 zonelists, mobility grouping on. Total pages: 129000 [ 0.343331] Kernel command line: placeholder root=/dev/mapper/huxelrebe1--vg-root ro console=hvc0 [ 0.343379] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.343390] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.343835] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.370629] software IO TLB: mapped [mem 0x1b180000-0x1f180000] (64MB) [ 0.371770] Memory: 386788K/524284K available (14341K kernel code, 1299K rwdata, 2920K rodata, 1452K init, 1224K bss, 137496K reserved, 0K cma-reserved) [ 0.371898] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.372869] rcu: Hierarchical RCU implementation. [ 0.372870] rcu: RCU event tracing is enabled. [ 0.372871] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.372872] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.372873] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.373991] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.374072] xen:events: Using FIFO-based ABI [ 0.374090] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.374094] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.374099] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.374103] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.374107] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.374111] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.374115] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.374119] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.374123] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.374128] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.374132] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.374136] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.374140] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.374144] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.374148] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.374167] random: crng init done [ 0.375722] Console: colour VGA+ 80x25 [ 0.382495] printk: console [tty0] enabled [ 0.383259] printk: console [hvc0] enabled [ 0.383322] ACPI: Core revision 20190816 [ 0.392935] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x92, should be 0x45 (20190816/tbprint-173) [ 0.393066] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.393148] Xen: using vcpuop timer interface [ 0.393153] installing Xen timer for CPU 0 [ 0.393227] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 0.393310] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.21 BogoMIPS (lpj=3192606) [ 0.393485] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.393543] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.393605] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.393682] Spectre V2 : Mitigation: Retpolines [ 0.393803] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.393879] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.393936] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.393996] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.394072] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.394132] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.394213] MDS: Mitigation: Clear CPU buffers [ 0.394313] MMIO Stale Data: Unknown: No mitigations [ 0.394369] SRBDS: Unknown: Dependent on hypervisor status [ 0.394444] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.394518] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.394575] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.394633] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.394690] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.394925] Freeing SMP alternatives memory: 36K [ 0.396165] pid_max: default: 32768 minimum: 301 [ 0.396233] LSM: Security Framework initializing [ 0.396292] SELinux: Initializing. [ 0.396324] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.396399] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.397389] cpu 0 spinlock event irq 25 [ 0.397445] VPMU disabled by hypervisor. [ 0.398415] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.398543] rcu: Hierarchical SRCU implementation. [ 0.398702] smp: Bringing up secondary CPUs ... [ 0.398831] installing Xen timer for CPU 1 [ 0.399118] cpu 1 spinlock event irq 35 [ 0.399444] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.399622] installing Xen timer for CPU 2 [ 0.399925] cpu 2 spinlock event irq 41 [ 0.400391] installing Xen timer for CPU 3 [ 0.400682] cpu 3 spinlock event irq 47 [ 0.400682] smp: Brought up 1 node, 4 CPUs [ 0.400682] smpboot: Max logical packages: 1 [ 0.401313] devtmpfs: initialized [ 0.401395] x86/mm: Memory block size: 128MB [ 0.401562] PM: Registering ACPI NVS region [mem 0xca2b6000-0xca2bcfff] (28672 bytes) [ 0.401562] PM: Registering ACPI NVS region [mem 0xda7a9000-0xdb4bbfff] (13709312 bytes) [ 0.401616] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.401698] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.401914] PM: RTC time: 05:55:55, date: 2024-04-24 [ 0.402389] NET: Registered protocol family 16 [ 0.402467] xen:grant_table: Grant tables using version 1 layout [ 0.402533] Grant table initialized [ 0.402668] audit: initializing netlink subsys (disabled) [ 0.402750] audit: type=2000 audit(1713938156.231:1): state=initialized audit_enabled=0 res=1 [ 0.402750] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.402750] ACPI: bus type PCI registered [ 0.402750] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.403314] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.423603] PCI: Using configuration type 1 for base access [ 0.426341] ACPI: Added _OSI(Module Device) [ 0.426469] ACPI: Added _OSI(Processor Device) [ 0.426525] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.426581] ACPI: Added _OSI(Processor Aggregator Device) [ 0.426639] ACPI: Added _OSI(Linux-Dell-Video) [ 0.426694] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.426752] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.441677] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.442401] xen: registering gsi 9 triggering 0 polarity 0 [ 0.442889] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.444070] ACPI: Dynamic OEM Table Load: [ 0.444127] ACPI: SSDT 0xFFFF88801A47C800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.444924] ACPI: Dynamic OEM Table Load: [ 0.445000] ACPI: SSDT 0xFFFF88801A482000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.445654] ACPI: Dynamic OEM Table Load: [ 0.445756] ACPI: SSDT 0xFFFF88801AE0E200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.447439] ACPI: Interpreter enabled [ 0.447508] ACPI: (supports S0 S5) [ 0.447560] ACPI: Using IOAPIC for interrupt routing [ 0.447633] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.448186] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.455722] ACPI: Power Resource [FN00] (off) [ 0.455822] ACPI: Power Resource [FN01] (off) [ 0.455918] ACPI: Power Resource [FN02] (off) [ 0.456015] ACPI: Power Resource [FN03] (off) [ 0.456110] ACPI: Power Resource [FN04] (off) [ 0.456930] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.456992] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.457735] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] [ 0.457811] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.458199] PCI host bridge to bus 0000:00 [ 0.458253] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.458313] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.458372] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.458446] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.458521] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.458595] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.458669] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.458744] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.458818] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.458893] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.458969] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.459265] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.459545] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.459764] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400 [ 0.460043] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.460256] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400 [ 0.460533] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.460756] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 [ 0.460896] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.460983] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.461075] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.461358] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.461464] pci 0000:00:03.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit] [ 0.461862] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.462002] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit] [ 0.462336] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.462525] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.462662] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3c000-0xf7e3c00f 64bit] [ 0.462958] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.463135] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.463256] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.463339] pci 0000:00:16.3: reg 0x14: [mem 0xf7e3a000-0xf7e3afff] [ 0.463764] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.463890] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff] [ 0.463973] pci 0000:00:19.0: reg 0x14: [mem 0xf7e39000-0xf7e39fff] [ 0.464057] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.464339] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.464529] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.464654] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e38000-0xf7e383ff] [ 0.464998] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.465227] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.465601] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.465714] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.465772] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.465985] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.466373] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.466499] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.466557] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.466778] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.466904] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e37000-0xf7e373ff] [ 0.467237] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.467428] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 [ 0.467896] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.468022] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.468102] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.468184] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.468265] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.468339] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.468421] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e36000-0xf7e367ff] [ 0.468628] pci 0000:00:1f.2: PME# supported from D3hot [ 0.468800] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.468926] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e35000-0xf7e350ff 64bit] [ 0.469064] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 0.469398] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.469586] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 [ 0.469712] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff] [ 0.469832] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.469925] pci 0000:02:00.0: reg 0x1c: [mem 0xf7d80000-0xf7d83fff] [ 0.470272] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.470605] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.470666] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.470732] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.470912] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 [ 0.471026] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c7ffff] [ 0.471133] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.471214] pci 0000:03:00.0: reg 0x1c: [mem 0xf7c80000-0xf7c83fff] [ 0.471536] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.471765] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.471846] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.471932] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.472103] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.472343] pci 0000:05:00.0: [1283:8893] type 01 class 0x060401 [ 0.472868] pci 0000:05:00.0: supports D1 D2 [ 0.472922] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.473133] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.473341] pci_bus 0000:06: extended config space not accessible [ 0.473577] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.473788] pci_bus 0000:00: on NUMA node 0 [ 0.473925] xen: registering gsi 13 triggering 1 polarity 0 [ 0.474619] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.474737] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.474845] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.474953] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.475061] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.475168] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.475293] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.475362] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.475713] xen:balloon: Initialising balloon driver [ 0.477378] iommu: Default domain type: Translated [ 0.477443] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.477443] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.477478] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.477534] vgaarb: loaded [ 0.477622] SCSI subsystem initialized [ 0.477680] libata version 3.00 loaded. [ 0.477680] ACPI: bus type USB registered [ 0.477680] usbcore: registered new interface driver usbfs [ 0.477680] usbcore: registered new interface driver hub [ 0.477680] usbcore: registered new device driver usb [ 0.477680] pps_core: LinuxPPS API ver. 1 registered [ 0.478314] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.478393] PTP clock support registered [ 0.478454] EDAC MC: Ver: 3.0.0 [ 0.478623] Advanced Linux Sound Architecture Driver Initialized. [ 0.478623] PCI: Using ACPI for IRQ routing [ 0.485198] PCI: pci_cache_line_size set to 64 bytes [ 0.485373] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.485374] e820: reserve RAM buffer [mem 0x20063000-0x23ffffff] [ 0.485440] NetLabel: Initializing [ 0.485493] NetLabel: domain hash size = 128 [ 0.485546] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.485611] NetLabel: unlabeled traffic allowed by default [ 0.487340] clocksource: Switched to clocksource tsc-early [ 0.555919] VFS: Disk quotas dquot_6.6.0 [ 0.556034] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.556106] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.556187] pnp: PnP ACPI init [ 0.556461] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.556521] system 00:00: [io 0xffff] has been reserved [ 0.556576] system 00:00: [io 0xffff] has been reserved [ 0.556631] system 00:00: [io 0xffff] has been reserved [ 0.556686] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.556744] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.556801] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.556858] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.556915] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.556972] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.557031] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.557038] xen: registering gsi 8 triggering 1 polarity 0 [ 0.557054] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.557085] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.557146] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.557263] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.557407] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.557465] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.557523] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.557566] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.557626] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.557800] xen: registering gsi 4 triggering 1 polarity 0 [ 0.557801] Already setup the GSI :4 [ 0.557854] pnp 00:05: [dma 0 disabled] [ 0.557877] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.558112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.558613] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.558673] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.558786] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.558844] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.558903] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.558961] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.559020] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.559079] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.559137] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.559196] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.559254] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.559330] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.559401] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.559651] pnp: PnP ACPI: found 8 devices [ 0.561590] thermal_sys: Registered thermal governor 'step_wise' [ 0.561591] thermal_sys: Registered thermal governor 'user_space' [ 0.577330] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.577471] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.577551] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.577609] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.577674] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.577749] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.577806] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.577871] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.577946] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.578035] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.578136] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.578266] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.578340] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.578419] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.578478] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.578536] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.578595] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.578654] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window] [ 0.578712] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window] [ 0.578771] pci_bus 0000:00: resource 12 [mem 0xdf200000-0xfeafffff window] [ 0.578830] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.578886] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.578944] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.578999] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.579115] NET: Registered protocol family 2 [ 0.579186] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.579397] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.579476] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.579605] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.579671] TCP: Hash tables configured (established 4096 bind 4096) [ 0.579739] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.579799] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.579874] NET: Registered protocol family 1 [ 0.580164] RPC: Registered named UNIX socket transport module. [ 0.580222] RPC: Registered udp transport module. [ 0.580276] RPC: Registered tcp transport module. [ 0.580362] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.580541] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.580688] xen: registering gsi 16 triggering 0 polarity 1 [ 0.580705] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.580927] xen: registering gsi 17 triggering 0 polarity 1 [ 0.580938] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.597433] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x690 took 16156 usecs [ 0.597565] xen: registering gsi 23 triggering 0 polarity 1 [ 0.597575] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.623963] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x690 took 25818 usecs [ 0.624167] PCI: CLS 64 bytes, default 64 [ 0.624241] Unpacking initramfs... [ 0.858014] Freeing initrd memory: 28708K [ 0.858150] kvm: no hardware support [ 0.858202] has_svm: not amd or hygon [ 0.858254] kvm: no hardware support [ 0.859119] check: Scanning for low memory corruption every 60 seconds [ 0.859392] Initialise system trusted keyrings [ 0.859511] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.860555] NFS: Registering the id_resolver key type [ 0.860618] Key type id_resolver registered [ 0.860673] Key type id_legacy registered [ 0.864522] Key type asymmetric registered [ 0.864577] Asymmetric key parser 'x509' registered [ 0.864637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.864711] io scheduler mq-deadline registered [ 0.864765] io scheduler kyber registered [ 0.865034] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865038] Already setup the GSI :16 [ 0.865206] pcieport 0000:00:01.0: PME: Signaling with IRQ 50 [ 0.865468] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865470] Already setup the GSI :16 [ 0.865616] pcieport 0000:00:01.1: PME: Signaling with IRQ 51 [ 0.865812] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865813] Already setup the GSI :16 [ 0.865955] pcieport 0000:00:01.2: PME: Signaling with IRQ 52 [ 0.866153] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866155] Already setup the GSI :16 [ 0.866357] pcieport 0000:00:1c.0: PME: Signaling with IRQ 53 [ 0.866597] xen: registering gsi 19 triggering 0 polarity 1 [ 0.866607] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.866784] pcieport 0000:00:1c.3: PME: Signaling with IRQ 54 [ 0.867070] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.867173] ACPI: Power Button [PWRB] [ 0.867245] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.867380] ACPI: Power Button [PWRF] [ 0.867692] Monitor-Mwait will be used to enter C-1 state [ 0.867695] Monitor-Mwait will be used to enter C-2 state [ 0.868429] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.868492] ACPI: Thermal Zone [TZ00] (28 C) [ 0.868745] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.868806] ACPI: Thermal Zone [TZ01] (30 C) [ 0.869004] xen:xen_evtchn: Event-channel device installed [ 0.869106] xen_pciback: backend is vpci [ 0.869524] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.869863] xen: registering gsi 19 triggering 0 polarity 1 [ 0.869866] Already setup the GSI :19 [ 0.891009] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.891266] hpet_acpi_add: no address or irqs in _CRS [ 0.891414] Non-volatile memory driver v1.3 [ 0.891502] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 0.891560] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 0.892869] loop: module loaded [ 0.895145] ahci 0000:00:1f.2: version 3.0 [ 0.895198] xen: registering gsi 19 triggering 0 polarity 1 [ 0.895201] Already setup the GSI :19 [ 0.895426] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x1f impl SATA mode [ 0.895503] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.908796] scsi host0: ahci [ 0.908980] scsi host1: ahci [ 0.909163] scsi host2: ahci [ 0.909328] scsi host3: ahci [ 0.909481] scsi host4: ahci [ 0.909571] ata1: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36100 irq 56 [ 0.909714] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 56 [ 0.909792] ata3: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36200 irq 56 [ 0.909870] ata4: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36280 irq 56 [ 0.909948] ata5: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36300 irq 56 [ 0.910100] tun: Universal TUN/TAP device driver, 1.6 [ 0.910202] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.910264] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.910336] sky2: driver version 1.30 [ 0.910413] xen_netfront: Initialising Xen virtual ethernet driver [ 0.910529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.910590] ehci-pci: EHCI PCI platform driver [ 0.912290] xen: registering gsi 17 triggering 0 polarity 1 [ 0.912292] Already setup the GSI :17 [ 0.912481] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.912580] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.912679] ehci-pci 0000:00:1a.0: debug port 2 [ 0.916699] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.916789] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7e38000 [ 0.923354] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.923490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.923637] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.923711] usb usb1: Product: EHCI Host Controller [ 0.923765] usb usb1: Manufacturer: Linux 5.4.274 ehci_hcd [ 0.923820] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.923990] hub 1-0:1.0: USB hub found [ 0.924048] hub 1-0:1.0: 3 ports detected [ 0.924243] xen: registering gsi 23 triggering 0 polarity 1 [ 0.924245] Already setup the GSI :23 [ 0.924358] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.924515] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.924626] ehci-pci 0000:00:1d.0: debug port 2 [ 0.928633] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.928721] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e37000 [ 0.936354] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.936472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.936560] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.936634] usb usb2: Product: EHCI Host Controller [ 0.936688] usb usb2: Manufacturer: Linux 5.4.274 ehci_hcd [ 0.936743] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.936929] hub 2-0:1.0: USB hub found [ 0.936987] hub 2-0:1.0: 3 ports detected [ 0.937136] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.937196] ohci-pci: OHCI PCI platform driver [ 0.937255] uhci_hcd: USB Universal Host Controller Interface driver [ 0.937489] xen: registering gsi 16 triggering 0 polarity 1 [ 0.937491] Already setup the GSI :16 [ 0.937595] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.937706] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.938855] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.938949] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.939187] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.939284] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.939401] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.939488] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.939564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.939638] usb usb3: Product: xHCI Host Controller [ 0.939692] usb usb3: Manufacturer: Linux 5.4.274 xhci-hcd [ 0.939747] usb usb3: SerialNumber: 0000:00:14.0 [ 0.939874] hub 3-0:1.0: USB hub found [ 0.939943] hub 3-0:1.0: 15 ports detected [ 0.942886] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.943035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.943109] usb usb4: Product: xHCI Host Controller [ 0.943163] usb usb4: Manufacturer: Linux 5.4.274 xhci-hcd [ 0.943219] usb usb4: SerialNumber: 0000:00:14.0 [ 0.943382] hub 4-0:1.0: USB hub found [ 0.943447] hub 4-0:1.0: 6 ports detected [ 0.944134] usbcore: registered new interface driver usblp [ 0.944200] usbcore: registered new interface driver usb-storage [ 0.944275] i8042: PNP: No PS/2 controller found. [ 0.944583] rtc_cmos 00:01: RTC can wake from S4 [ 0.944916] rtc_cmos 00:01: registered as rtc0 [ 0.944980] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.945096] xen: registering gsi 18 triggering 0 polarity 1 [ 0.945108] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.945180] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.945965] device-mapper: uevent: version 1.0.3 [ 0.946077] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 0.946156] intel_pstate: CPU model not supported [ 0.946216] hidraw: raw HID events driver (C) Jiri Kosina [ 0.946382] usbcore: registered new interface driver usbhid [ 0.946438] usbhid: USB HID core driver [ 0.946645] xen: registering gsi 16 triggering 0 polarity 1 [ 0.946647] Already setup the GSI :16 [ 0.946707] snd_hda_intel 0000:00:03.0: Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915 [ 0.947332] Initializing XFRM netlink socket [ 0.947454] NET: Registered protocol family 10 [ 0.947630] Segment Routing with IPv6 [ 0.947833] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.947966] NET: Registered protocol family 17 [ 0.948029] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.948127] Key type dns_resolver registered [ 0.948323] IPI shorthand broadcast: enabled [ 0.948392] sched_clock: Marking stable (929156340, 19156053)->(951329135, -3016742) [ 0.948669] registered taskstats version 1 [ 0.948726] Loading compiled-in X.509 certificates [ 0.949059] PM: Magic number: 4:211:922 [ 0.949166] printk: console [netcon0] enabled [ 0.949223] netconsole: network logging started [ 0.949459] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.950727] hdaudio hdaudioC0D0: Unable to bind the codec [ 0.957066] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.957275] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.957388] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 0.957470] cfg80211: failed to load regulatory.db [ 0.957534] ALSA device list: [ 0.957587] No soundcards found. [ 1.163354] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.179352] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.222362] ata3: SATA link down (SStatus 0 SControl 300) [ 1.222465] ata4: SATA link down (SStatus 0 SControl 300) [ 1.223362] ata2: SATA link down (SStatus 0 SControl 300) [ 1.223458] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.223551] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.225435] ata1.00: ATA-8: WD1003FBYX-88 LEN, WB33, max UDMA/133 [ 1.225578] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.228253] ata1.00: configured for UDMA/133 [ 1.228440] scsi 0:0:0:0: Direct-Access ATA WD1003FBYX-88 WB33 PQ: 0 ANSI: 5 [ 1.228741] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.228860] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.228954] sd 0:0:0:0: [sda] Write Protect is off [ 1.229014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.229039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.232643] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.232644] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.232722] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.239223] ata5.00: ATAPI: PLDS DVD-RW DU8A5SH, BL61, max UDMA/100 [ 1.243852] sda: sda1 sda2 < sda5 > [ 1.244475] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.245796] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.245798] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.245878] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.251548] ata5.00: configured for UDMA/100 [ 1.253795] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DU8A5SH BL61 PQ: 0 ANSI: 5 [ 1.293838] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 1.293917] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.294164] hub 1-1:1.0: USB hub found [ 1.294263] hub 1-1:1.0: 6 ports detected [ 1.300107] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.300200] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.300463] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.300529] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.301271] Freeing unused kernel image memory: 1452K [ 1.301450] Write protecting the kernel read-only data: 20480k [ 1.311734] Freeing unused kernel image memory: 2024K [ 1.312409] Freeing unused kernel image memory: 1176K [ 1.312466] Run /init as init process [ 1.312671] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 1.312758] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.313032] hub 2-1:1.0: USB hub found [ 1.313140] hub 2-1:1.0: 8 ports detected [ 1.508313] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 1.508383] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.508528] xen: registering gsi 17 triggering 0 polarity 1 [ 1.508533] Already setup the GSI :17 [ 1.511307] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.511370] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.511568] xen: registering gsi 20 triggering 0 polarity 1 [ 1.511582] xen: --> pirq=20 -> irq=20 (gsi=20) [ 1.511739] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.540169] pps pps0: new PPS source ptp0 [ 1.540291] igb 0000:02:00.0: added PHC on eth0 [ 1.540382] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.540452] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:5f [ 1.540571] igb 0000:02:00.0: eth0: PBA No: 000300-000 [ 1.540701] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.540855] xen: registering gsi 18 triggering 0 polarity 1 [ 1.540859] Already setup the GSI :18 [ 1.569480] pps pps1: new PPS source ptp1 [ 1.569598] igb 0000:03:00.0: added PHC on eth1 [ 1.569676] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.571412] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:60 [ 1.571503] igb 0000:03:00.0: eth1: PBA No: 000300-000 [ 1.571569] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.573240] igb 0000:02:00.0 enx4439c46d205f: renamed from eth0 [ 1.584067] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.586459] igb 0000:03:00.0 enx4439c46d2060: renamed from eth1 [ 1.646814] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:39:c4:39:a1:19 [ 1.646894] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.646996] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.648252] e1000e 0000:00:19.0 enx4439c439a119: renamed from eth0 [ 1.897187] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 1.897322] clocksource: Switched to clocksource tsc [ 1.984514] PM: Image not found (code -22) [ 2.211677] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.215343] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 5.349006] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 6.063409] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 6.089151] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.161198] Adding 1949692k swap on /dev/mapper/huxelrebe1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 7.725993] xenbr0: port 1(enx4439c46d2060) entered blocking state [ 7.726085] xenbr0: port 1(enx4439c46d2060) entered disabled state [ 7.726254] device enx4439c46d2060 entered promiscuous mode [ 10.700665] igb 0000:03:00.0 enx4439c46d2060: igb: enx4439c46d2060 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 10.809416] IPv6: ADDRCONF(NETDEV_CHANGE): enx4439c46d2060: link becomes ready [ 10.809543] xenbr0: port 1(enx4439c46d2060) entered blocking state [ 10.809661] xenbr0: port 1(enx4439c46d2060) entered forwarding state [ 10.809819] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready