[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 12:50:31 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000014] Xen PV: Detected 6 vCPUS [ 0.037589] tsc: Fast TSC calibration using PIT [ 0.037591] tsc: Detected 3101.135 MHz processor [ 0.037592] tsc: Detected 3101.144 MHz TSC [ 0.037805] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037810] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037817] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037822] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037824] MTRRs set to read-only [ 0.037828] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062733] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.062762] ACPI: Early table checksum verification disabled [ 0.064212] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064224] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064271] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064335] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.064347] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064358] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064369] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064380] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064393] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064403] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064415] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064426] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064437] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064448] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064459] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064470] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064481] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064491] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064496] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064498] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064500] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064501] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064502] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064504] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064505] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064506] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064507] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064509] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064510] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064511] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064512] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064514] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064515] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064652] APIC: Switched APIC routing to: Xen PV [ 0.067013] Zone ranges: [ 0.067015] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.067018] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.067020] Normal empty [ 0.067022] Movable zone start for each node [ 0.067023] Early memory node ranges [ 0.067023] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.067026] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.067029] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.067043] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067183] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072847] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072868] p2m virtual area at (____ptrval____), size is 40000000 [ 0.328286] Remapped 106 page(s) [ 0.328833] ACPI: PM-Timer IO Port: 0x808 [ 0.328870] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.328903] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.328909] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.328936] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.328946] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.328960] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.328966] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.328993] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.328997] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.329012] CPU topo: Max. logical packages: 1 [ 0.329014] CPU topo: Max. logical dies: 1 [ 0.329015] CPU topo: Max. dies per package: 1 [ 0.329022] CPU topo: Max. threads per core: 1 [ 0.329025] CPU topo: Num. cores per package: 6 [ 0.329026] CPU topo: Num. threads per package: 6 [ 0.329027] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.329028] CPU topo: Rejected CPUs 2 [ 0.329049] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.329053] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.329056] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.329072] Booting kernel on Xen [ 0.329073] Xen version: 4.19-unstable (preserve-AD) [ 0.329080] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.335394] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.336741] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u262144 [ 0.336751] pcpu-alloc: s194344 r8192 d30936 u262144 alloc=1*2097152 [ 0.336757] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.336860] xen: PV spinlocks enabled [ 0.336866] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.336870] Kernel command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.336972] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.337042] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.337181] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.337454] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.337459] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.337464] software IO TLB: area num 8. [ 0.477537] Memory: 388040K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135992K reserved, 0K cma-reserved) [ 0.477695] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.480863] Dynamic Preempt: voluntary [ 0.481017] rcu: Preemptible hierarchical RCU implementation. [ 0.481018] rcu: RCU event tracing is enabled. [ 0.481019] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.481022] Trampoline variant of Tasks RCU enabled. [ 0.481023] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.481025] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.481044] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.488002] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.488196] xen:events: Using FIFO-based ABI [ 0.488248] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.488254] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.488260] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.488266] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.488271] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.488280] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.488286] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.488293] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.488298] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.488304] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.488310] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.488315] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.488321] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.488327] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.488333] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.488347] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.494355] Console: colour VGA+ 80x25 [ 0.494361] printk: legacy console [tty0] enabled [ 0.507829] printk: legacy console [hvc0] enabled [ 0.508489] ACPI: Core revision 20230628 [ 0.514244] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.514403] Xen: using vcpuop timer interface [ 0.514410] installing Xen timer for CPU 0 [ 0.514672] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb38081cf2, max_idle_ns: 440795365428 ns [ 0.514839] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.28 BogoMIPS (lpj=3101144) [ 0.515048] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.515267] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.515377] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.515492] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.515853] Spectre V2 : Mitigation: Retpolines [ 0.515957] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.516099] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.516209] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.516320] RETBleed: Mitigation: untrained return thunk [ 0.516428] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.516589] Speculative Store Bypass: Vulnerable [ 0.516722] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.516842] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.516950] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.517060] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.517170] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.577093] Freeing SMP alternatives memory: 40K [ 0.577493] pid_max: default: 32768 minimum: 301 [ 0.577976] LSM: initializing lsm=capability,selinux [ 0.578352] SELinux: Initializing. [ 0.578825] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.579218] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.581126] cpu 0 spinlock event irq 57 [ 0.581371] VPMU disabled by hypervisor. [ 0.583441] Performance Events: PMU not available due to virtualization, using software events only. [ 0.583875] signal: max sigframe size: 1776 [ 0.584620] rcu: Hierarchical SRCU implementation. [ 0.584872] rcu: Max phase no-delay instances is 400. [ 0.608271] smp: Bringing up secondary CPUs ... [ 0.609993] installing Xen timer for CPU 1 [ 0.612206] installing Xen timer for CPU 2 [ 0.614403] installing Xen timer for CPU 3 [ 0.616579] installing Xen timer for CPU 4 [ 0.618783] installing Xen timer for CPU 5 [ 0.027481] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.619556] cpu 1 spinlock event irq 87 [ 0.027481] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.619911] cpu 2 spinlock event irq 88 [ 0.027481] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.621085] cpu 3 spinlock event irq 89 [ 0.027481] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0014 [ 0.621891] cpu 4 spinlock event irq 90 [ 0.027481] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0015 [ 0.623856] cpu 5 spinlock event irq 91 [ 0.624998] smp: Brought up 1 node, 6 CPUs [ 0.625513] devtmpfs: initialized [ 0.625858] x86/mm: Memory block size: 128MB [ 0.626584] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.626892] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.627051] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.627355] PM: RTC time: 13:11:54, date: 2024-04-24 [ 0.627712] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.627871] xen:grant_table: Grant tables using version 1 layout [ 0.628057] Grant table initialized [ 0.628463] audit: initializing netlink subsys (disabled) [ 0.628824] audit: type=2000 audit(1713964315.139:1): state=initialized audit_enabled=0 res=1 [ 0.629048] thermal_sys: Registered thermal governor 'step_wise' [ 0.629048] thermal_sys: Registered thermal governor 'user_space' [ 0.630086] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.630349] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.703960] PCI: Using configuration type 1 for base access [ 0.704162] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.706041] ACPI: Added _OSI(Module Device) [ 0.706452] ACPI: Added _OSI(Processor Device) [ 0.706781] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.706880] ACPI: Added _OSI(Processor Aggregator Device) [ 0.734914] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.739346] xen: registering gsi 9 triggering 0 polarity 1 [ 0.741008] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.741404] ACPI: Interpreter enabled [ 0.741868] ACPI: PM: (supports S0 S1 S4 S5) [ 0.741974] ACPI: Using IOAPIC for interrupt routing [ 0.742138] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.742295] PCI: Using E820 reservations for host bridge windows [ 0.742611] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.754744] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.754846] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.755004] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.755117] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.755261] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.755732] PCI host bridge to bus 0000:00 [ 0.755835] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.755951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.756065] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.756231] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.756373] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.756516] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.756676] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.757259] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.757780] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.757912] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.758031] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.758146] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.758308] pci 0000:00:09.0: enabling Extended Tags [ 0.758533] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.758831] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.759046] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.759166] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.759282] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.759445] pci 0000:00:0a.0: enabling Extended Tags [ 0.759672] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.759984] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.760180] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.760314] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.760443] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.760573] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.760704] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.760832] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.761192] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.761386] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.761810] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.761883] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.762288] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.762476] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.762850] pci 0000:00:12.2: supports D1 D2 [ 0.762953] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.763226] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.763423] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.763830] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.764025] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.764490] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.764683] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.765032] pci 0000:00:13.2: supports D1 D2 [ 0.765137] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.765430] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.765997] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.766191] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.766320] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.766456] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.766585] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.766712] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.766882] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.766995] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.767105] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.767216] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.767520] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.768021] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.768262] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.768391] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.768518] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.768799] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.768883] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.769288] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.769692] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.770007] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.770327] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.770687] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.771060] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.771543] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.771737] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.771896] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.772033] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.772447] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.774938] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.775260] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.775456] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.775627] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.775760] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.776114] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.778905] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.779087] pci_bus 0000:03: extended config space not accessible [ 0.779272] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.779466] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.779609] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.779745] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.779985] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.780428] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.780563] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.780709] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.780840] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.780988] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.781136] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.781344] pci_bus 0000:00: on NUMA node 0 [ 0.782050] xen: registering gsi 13 triggering 1 polarity 0 [ 0.782577] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.782772] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.782962] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.783154] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.783345] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.783537] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.783727] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.783922] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.784210] xen:balloon: Initialising balloon driver [ 0.784382] iommu: Default domain type: Translated [ 0.784846] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.785126] SCSI subsystem initialized [ 0.785249] libata version 3.00 loaded. [ 0.785249] ACPI: bus type USB registered [ 0.785249] usbcore: registered new interface driver usbfs [ 0.785249] usbcore: registered new interface driver hub [ 0.785856] usbcore: registered new device driver usb [ 0.785996] pps_core: LinuxPPS API ver. 1 registered [ 0.786106] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.786256] PTP clock support registered [ 0.786386] Advanced Linux Sound Architecture Driver Initialized. [ 0.787191] NetLabel: Initializing [ 0.787293] NetLabel: domain hash size = 128 [ 0.787396] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.787535] NetLabel: unlabeled traffic allowed by default [ 0.787688] PCI: Using ACPI for IRQ routing [ 0.825342] PCI: pci_cache_line_size set to 64 bytes [ 0.825600] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.825628] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.825935] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.826072] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.826180] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.826337] vgaarb: loaded [ 0.829236] clocksource: Switched to clocksource tsc-early [ 0.829823] VFS: Disk quotas dquot_6.6.0 [ 0.829823] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.829823] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.830130] pnp: PnP ACPI init [ 0.831144] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.831416] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.832002] xen: registering gsi 8 triggering 1 polarity 0 [ 0.832311] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.832640] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.832756] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.833338] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.833452] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.833563] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.833711] system 00:05: [io 0x040b] has been reserved [ 0.833820] system 00:05: [io 0x04d6] has been reserved [ 0.833980] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.834092] system 00:05: [io 0x0c14] has been reserved [ 0.834201] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.834310] system 00:05: [io 0x0c52] has been reserved [ 0.834418] system 00:05: [io 0x0c6c] has been reserved [ 0.834525] system 00:05: [io 0x0c6f] has been reserved [ 0.834632] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.834742] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.834897] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.835201] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.835677] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.835985] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.836095] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.836201] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.836309] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.836419] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.836546] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.836658] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.836769] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.836898] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.837342] xen: registering gsi 4 triggering 1 polarity 0 [ 0.837348] Already setup the GSI :4 [ 0.837449] pnp 00:06: [dma 0 disabled] [ 0.837788] xen: registering gsi 3 triggering 1 polarity 0 [ 0.837799] pnp 00:07: [dma 0 disabled] [ 0.838061] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.838499] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.838691] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.838806] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.838966] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.839082] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.839380] pnp: PnP ACPI: found 10 devices [ 0.867810] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.868613] NET: Registered PF_INET protocol family [ 0.869057] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.869542] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.869733] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.869927] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.870119] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.870330] TCP: Hash tables configured (established 4096 bind 4096) [ 0.870515] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.870633] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.870812] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.872006] RPC: Registered named UNIX socket transport module. [ 0.872436] RPC: Registered udp transport module. [ 0.872766] RPC: Registered tcp transport module. [ 0.872993] RPC: Registered tcp-with-tls transport module. [ 0.873102] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.873946] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.874065] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.874203] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.874337] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.874447] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.874568] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.874700] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.874818] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.874975] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.875149] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.875264] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.875377] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.875491] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.875608] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.875735] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.875862] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.876144] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.876745] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.876969] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.877079] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.877188] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.877298] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.877407] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.877520] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.877633] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.878098] xen: registering gsi 16 triggering 0 polarity 1 [ 0.878166] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.528755] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635555 usecs [ 1.529163] xen: registering gsi 16 triggering 0 polarity 1 [ 1.529178] Already setup the GSI :16 [ 1.554129] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24442 usecs [ 1.554397] xen: registering gsi 17 triggering 0 polarity 1 [ 1.554478] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.554655] xen: registering gsi 18 triggering 0 polarity 1 [ 1.554681] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.579166] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23986 usecs [ 1.579431] xen: registering gsi 18 triggering 0 polarity 1 [ 1.579447] Already setup the GSI :18 [ 1.604666] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24695 usecs [ 1.605073] xen: registering gsi 19 triggering 0 polarity 1 [ 1.605136] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.605348] xen: registering gsi 18 triggering 0 polarity 1 [ 1.605353] Already setup the GSI :18 [ 1.630572] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 24682 usecs [ 1.631036] PCI: CLS 64 bytes, default 64 [ 1.631157] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.631495] Unpacking initramfs... [ 1.631510] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.632177] kvm_intel: VMX not supported by CPU 0 [ 1.632293] kvm_amd: SVM not supported by CPU 0 [ 1.632408] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb38081cf2, max_idle_ns: 440795365428 ns [ 1.633144] clocksource: Switched to clocksource tsc [ 1.642903] Initialise system trusted keyrings [ 1.643338] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.643887] NFS: Registering the id_resolver key type [ 1.644008] Key type id_resolver registered [ 1.644110] Key type id_legacy registered [ 1.644319] 9p: Installing v9fs 9p2000 file system support [ 1.665723] Key type asymmetric registered [ 1.665879] Asymmetric key parser 'x509' registered [ 1.666036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.666202] io scheduler mq-deadline registered [ 1.666308] io scheduler kyber registered [ 1.667222] xen: registering gsi 53 triggering 0 polarity 1 [ 1.667321] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.667724] xen: registering gsi 54 triggering 0 polarity 1 [ 1.667743] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.668236] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.668428] ACPI: button: Power Button [PWRB] [ 1.668591] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.668819] ACPI: button: Power Button [PWRF] [ 1.671587] ACPI: \_PR_.P001: Found 2 idle states [ 1.671828] ACPI: \_PR_.P002: Found 2 idle states [ 1.671983] ACPI: \_PR_.P003: Found 2 idle states [ 1.673637] ACPI: \_PR_.P004: Found 2 idle states [ 1.673831] ACPI: \_PR_.P005: Found 2 idle states [ 1.674022] ACPI: \_PR_.P006: Found 2 idle states [ 1.675144] xen:xen_evtchn: Event-channel device installed [ 1.675412] xen_pciback: backend is vpci [ 1.676568] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.677089] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.678020] hpet_acpi_add: no address or irqs in _CRS [ 1.678195] Non-volatile memory driver v1.3 [ 1.689338] loop: module loaded [ 1.720078] ahci 0000:00:11.0: version 3.0 [ 1.720915] xen: registering gsi 22 triggering 0 polarity 1 [ 1.721109] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.721733] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.722233] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.722790] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.732257] scsi host0: ahci [ 1.734125] scsi host1: ahci [ 1.735357] scsi host2: ahci [ 1.736365] scsi host3: ahci [ 1.736580] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.736740] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.736904] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.737096] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.737925] tun: Universal TUN/TAP device driver, 1.6 [ 1.738278] e100: Intel(R) PRO/100 Network Driver [ 1.738397] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.738534] sky2: driver version 1.30 [ 1.738690] xen_netfront: Initialising Xen virtual ethernet driver [ 1.739365] xen: registering gsi 17 triggering 0 polarity 1 [ 1.739371] xen: registering gsi 16 triggering 0 polarity 1 [ 1.739387] Already setup the GSI :16 [ 1.739387] Already setup the GSI :17 [ 1.739472] xen: registering gsi 19 triggering 0 polarity 1 [ 1.739543] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.739809] Already setup the GSI :19 [ 1.740054] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.740456] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.740683] ehci-pci 0000:00:12.2: debug port 1 [ 1.740930] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.747583] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.747932] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.748111] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.748256] usb usb1: Product: EHCI Host Controller [ 1.748364] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.748474] usb usb1: SerialNumber: 0000:00:12.2 [ 1.749826] hub 1-0:1.0: USB hub found [ 1.750361] hub 1-0:1.0: 6 ports detected [ 1.751009] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.751274] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 1.751559] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.807786] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.807987] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.808129] usb usb2: Product: OHCI PCI host controller [ 1.808235] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.808343] usb usb2: SerialNumber: 0000:00:12.0 [ 1.808856] hub 2-0:1.0: USB hub found [ 1.808971] hub 2-0:1.0: 3 ports detected [ 1.809404] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.809582] xen: registering gsi 16 triggering 0 polarity 1 [ 1.809617] Already setup the GSI :16 [ 1.809795] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.809952] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.810126] ehci-pci 0000:00:13.2: debug port 1 [ 1.810377] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.817622] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.818130] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.818321] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.818464] usb usb3: Product: EHCI Host Controller [ 1.818590] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.818699] usb usb3: SerialNumber: 0000:00:13.2 [ 1.819201] hub 3-0:1.0: USB hub found [ 1.819342] hub 3-0:1.0: 6 ports detected [ 1.819900] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.820317] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.820587] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.877065] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.877265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.877410] usb usb4: Product: OHCI PCI host controller [ 1.877532] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.877646] usb usb4: SerialNumber: 0000:00:12.1 [ 1.878104] hub 4-0:1.0: USB hub found [ 1.878221] hub 4-0:1.0: 3 ports detected [ 1.878719] xen: registering gsi 18 triggering 0 polarity 1 [ 1.878736] Already setup the GSI :18 [ 1.878940] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.879385] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.879924] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.906524] Freeing initrd memory: 20188K [ 1.936994] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.937218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.937360] usb usb5: Product: OHCI PCI host controller [ 1.937467] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.937645] usb usb5: SerialNumber: 0000:00:13.0 [ 1.938197] hub 5-0:1.0: USB hub found [ 1.938366] hub 5-0:1.0: 3 ports detected [ 1.938986] xen: registering gsi 18 triggering 0 polarity 1 [ 1.939000] Already setup the GSI :18 [ 1.939178] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.939710] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.940316] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.996689] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.996887] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.997028] usb usb6: Product: OHCI PCI host controller [ 1.997134] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.997242] usb usb6: SerialNumber: 0000:00:13.1 [ 1.997768] hub 6-0:1.0: USB hub found [ 1.997945] hub 6-0:1.0: 3 ports detected [ 1.998522] xen: registering gsi 18 triggering 0 polarity 1 [ 1.998534] Already setup the GSI :18 [ 1.998717] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.998943] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.999157] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.049268] ata3: SATA link down (SStatus 0 SControl 300) [ 2.050012] ata4: SATA link down (SStatus 0 SControl 300) [ 2.055208] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.055381] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.055538] usb usb7: Product: OHCI PCI host controller [ 2.055647] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.055756] usb usb7: SerialNumber: 0000:00:14.5 [ 2.056438] hub 7-0:1.0: USB hub found [ 2.056640] hub 7-0:1.0: 2 ports detected [ 2.057361] usbcore: registered new interface driver usblp [ 2.057564] usbcore: registered new interface driver usb-storage [ 2.057721] i8042: PNP: No PS/2 controller found. [ 2.057825] i8042: Probing ports directly. [ 2.060905] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.061017] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.061746] rtc_cmos 00:02: RTC can wake from S4 [ 2.062346] rtc_cmos 00:02: registered as rtc0 [ 2.062516] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.062674] device-mapper: uevent: version 1.0.3 [ 2.063138] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.063349] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.063551] hid: raw HID events driver (C) Jiri Kosina [ 2.063898] usbcore: registered new interface driver usbhid [ 2.064013] usbhid: USB HID core driver [ 2.064998] Initializing XFRM netlink socket [ 2.065127] NET: Registered PF_INET6 protocol family [ 2.065796] Segment Routing with IPv6 [ 2.065910] In-situ OAM (IOAM) with IPv6 [ 2.066048] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.066412] NET: Registered PF_PACKET protocol family [ 2.066569] 9pnet: Installing 9P2000 support [ 2.066687] Key type dns_resolver registered [ 2.066808] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.068331] IPI shorthand broadcast: enabled [ 2.072978] sched_clock: Marking stable (2046004042, 26481694)->(2092176074, -19690338) [ 2.073669] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.074198] registered taskstats version 1 [ 2.074303] Loading compiled-in X.509 certificates [ 2.076609] PM: Magic number: 4:785:180 [ 2.076923] printk: legacy console [netcon0] enabled [ 2.077033] netconsole: network logging started [ 2.077312] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.119104] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.119563] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.119750] ALSA device list: [ 2.119850] No soundcards found. [ 2.120715] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.202661] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.205110] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.205574] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.207425] ata1.00: configured for UDMA/133 [ 2.207901] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.208689] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.208826] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.208859] sd 0:0:0:0: [sda] Write Protect is off [ 2.209055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.209081] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.209592] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.210613] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.213835] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.214743] ata2.00: configured for UDMA/100 [ 2.216725] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.236717] sda: sda1 sda2 < sda5 > [ 2.237389] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.246978] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.247158] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.262821] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.263098] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.271064] Freeing unused kernel image (initmem) memory: 2664K [ 2.271239] Write protecting the kernel read-only data: 22528k [ 2.306681] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.314828] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.419403] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.419575] Run /init as init process [ 2.419676] with arguments: [ 2.419678] /init [ 2.419679] placeholder [ 2.419682] with environment: [ 2.419683] HOME=/ [ 2.419684] TERM=linux [ 2.469605] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.470079] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.470577] usb 6-2: Product: Hermon USB hidmouse Device [ 2.470696] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.477160] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.477831] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.481901] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.534808] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.724913] e1000e: Intel(R) PRO/1000 Network Driver [ 2.725047] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.725295] xen: registering gsi 48 triggering 0 polarity 1 [ 2.726659] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.726915] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.770385] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.817268] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2e [ 2.817421] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.817624] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.817830] xen: registering gsi 47 triggering 0 polarity 1 [ 2.817858] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.818044] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.863526] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.913219] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2f [ 2.913367] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.913556] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.915596] e1000e 0000:01:00.0 enx0cc47a0a492e: renamed from eth0 [ 2.915949] e1000e 0000:02:00.0 enx0cc47a0a492f: renamed from eth1 [ 3.080529] random: crng init done [ 3.650757] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.663593] EXT4-fs (dm-0): mounted filesystem 35145b15-7764-4ad5-816c-ba811161ebc3 ro with ordered data mode. Quota mode: none. [ 7.597120] EXT4-fs (dm-0): re-mounted 35145b15-7764-4ad5-816c-ba811161ebc3 r/w. Quota mode: none. [ 9.057848] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.075550] EXT4-fs (sda1): mounted filesystem b921a77f-1e40-4ca0-970b-dc038b58db21 r/w with ordered data mode. Quota mode: none. [ 9.168688] Adding 1949692k swap on /dev/mapper/rimava0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.724027] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 10.724168] xenbr0: port 1(enx0cc47a0a492e) entered disabled state [ 10.724296] e1000e 0000:01:00.0 enx0cc47a0a492e: entered allmulticast mode [ 10.724455] e1000e 0000:01:00.0 enx0cc47a0a492e: entered promiscuous mode [ 13.986515] e1000e 0000:01:00.0 enx0cc47a0a492e: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.987055] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 13.987172] xenbr0: port 1(enx0cc47a0a492e) entered forwarding state