[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 12:50:31 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037371] tsc: Fast TSC calibration using PIT [ 0.037373] tsc: Detected 3101.096 MHz processor [ 0.037375] tsc: Detected 3101.144 MHz TSC [ 0.037582] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037586] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037593] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037598] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037600] MTRRs set to read-only [ 0.037604] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062440] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.062467] ACPI: Early table checksum verification disabled [ 0.063949] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.063963] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064009] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064073] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.064087] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064098] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064109] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064120] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064132] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064143] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064155] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064166] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064177] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064187] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064198] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064208] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064219] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064230] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064235] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064237] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064239] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064240] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064241] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064243] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064244] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064245] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064246] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064248] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064249] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064250] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064251] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064252] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064253] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064391] APIC: Switched APIC routing to: Xen PV [ 0.066625] Zone ranges: [ 0.066627] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.066630] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.066632] Normal empty [ 0.066633] Movable zone start for each node [ 0.066635] Early memory node ranges [ 0.066636] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.066638] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.066641] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.066655] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.066778] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072539] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072561] p2m virtual area at (____ptrval____), size is 40000000 [ 0.279947] Remapped 106 page(s) [ 0.280471] ACPI: PM-Timer IO Port: 0x808 [ 0.280507] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280541] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280546] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280572] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280580] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280594] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280601] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280627] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280631] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280646] CPU topo: Max. logical packages: 1 [ 0.280648] CPU topo: Max. logical dies: 1 [ 0.280649] CPU topo: Max. dies per package: 1 [ 0.280657] CPU topo: Max. threads per core: 1 [ 0.280659] CPU topo: Num. cores per package: 6 [ 0.280659] CPU topo: Num. threads per package: 6 [ 0.280660] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280661] CPU topo: Rejected CPUs 2 [ 0.280682] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.280685] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.280689] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.280695] Booting kernel on Xen [ 0.280697] Xen version: 4.19-unstable (preserve-AD) [ 0.280702] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.287024] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288375] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u262144 [ 0.288385] pcpu-alloc: s194344 r8192 d30936 u262144 alloc=1*2097152 [ 0.288391] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288493] xen: PV spinlocks enabled [ 0.288498] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288503] Kernel command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.288597] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.288666] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.288817] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.289080] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.289085] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.289089] software IO TLB: area num 8. [ 0.428790] Memory: 388040K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135992K reserved, 0K cma-reserved) [ 0.428942] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.432075] Dynamic Preempt: voluntary [ 0.432228] rcu: Preemptible hierarchical RCU implementation. [ 0.432230] rcu: RCU event tracing is enabled. [ 0.432231] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.432233] Trampoline variant of Tasks RCU enabled. [ 0.432235] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.432237] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.432258] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.439048] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.439229] xen:events: Using FIFO-based ABI [ 0.439267] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.439273] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.439286] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.439291] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.439297] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.439302] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.439307] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.439313] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.439318] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.439323] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.439328] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.439334] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.439339] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.439344] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.439349] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.439364] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.445361] Console: colour VGA+ 80x25 [ 0.445367] printk: legacy console [tty0] enabled [ 0.458784] printk: legacy console [hvc0] enabled [ 0.459432] ACPI: Core revision 20230628 [ 0.465212] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.465369] Xen: using vcpuop timer interface [ 0.465375] installing Xen timer for CPU 0 [ 0.465631] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb38081cf2, max_idle_ns: 440795365428 ns [ 0.465801] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.28 BogoMIPS (lpj=3101144) [ 0.465998] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.466211] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.466322] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.466438] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.466812] Spectre V2 : Mitigation: Retpolines [ 0.466914] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.467056] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.467166] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.467276] RETBleed: Mitigation: untrained return thunk [ 0.467383] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.467541] Speculative Store Bypass: Vulnerable [ 0.467672] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.467803] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.467912] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.468022] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.468131] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.495276] Freeing SMP alternatives memory: 40K [ 0.495431] pid_max: default: 32768 minimum: 301 [ 0.495594] LSM: initializing lsm=capability,selinux [ 0.495714] SELinux: Initializing. [ 0.495869] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.496015] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.496942] cpu 0 spinlock event irq 57 [ 0.497055] VPMU disabled by hypervisor. [ 0.497521] Performance Events: PMU not available due to virtualization, using software events only. [ 0.497681] signal: max sigframe size: 1776 [ 0.497837] rcu: Hierarchical SRCU implementation. [ 0.498801] rcu: Max phase no-delay instances is 400. [ 0.504870] smp: Bringing up secondary CPUs ... [ 0.505202] installing Xen timer for CPU 1 [ 0.505689] installing Xen timer for CPU 2 [ 0.506109] installing Xen timer for CPU 3 [ 0.506521] installing Xen timer for CPU 4 [ 0.506911] installing Xen timer for CPU 5 [ 0.027426] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.507152] cpu 1 spinlock event irq 87 [ 0.027426] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.507896] cpu 2 spinlock event irq 88 [ 0.027426] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.509017] cpu 3 spinlock event irq 89 [ 0.027426] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0014 [ 0.509849] cpu 4 spinlock event irq 90 [ 0.027426] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0015 [ 0.511063] cpu 5 spinlock event irq 91 [ 0.512012] smp: Brought up 1 node, 6 CPUs [ 0.513644] devtmpfs: initialized [ 0.513644] x86/mm: Memory block size: 128MB [ 0.514919] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.515649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.515860] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.517113] PM: RTC time: 13:58:00, date: 2024-04-24 [ 0.518544] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.519997] xen:grant_table: Grant tables using version 1 layout [ 0.520643] Grant table initialized [ 0.523555] audit: initializing netlink subsys (disabled) [ 0.523970] audit: type=2000 audit(1713967080.891:1): state=initialized audit_enabled=0 res=1 [ 0.525284] thermal_sys: Registered thermal governor 'step_wise' [ 0.525299] thermal_sys: Registered thermal governor 'user_space' [ 0.528948] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.529774] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 1.102184] PCI: Using configuration type 1 for base access [ 1.102880] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.104872] ACPI: Added _OSI(Module Device) [ 1.104980] ACPI: Added _OSI(Processor Device) [ 1.105084] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.105193] ACPI: Added _OSI(Processor Aggregator Device) [ 1.125496] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.126153] xen: registering gsi 9 triggering 0 polarity 1 [ 1.138553] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 1.138871] ACPI: Interpreter enabled [ 1.138998] ACPI: PM: (supports S0 S1 S4 S5) [ 1.139102] ACPI: Using IOAPIC for interrupt routing [ 1.139285] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.139433] PCI: Using E820 reservations for host bridge windows [ 1.139709] ACPI: Enabled 4 GPEs in block 00 to 1F [ 1.189670] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.190846] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.191314] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 1.191660] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 1.191829] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 1.194942] PCI host bridge to bus 0000:00 [ 1.195314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.195681] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.195834] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.196241] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 1.196635] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 1.197858] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.198607] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 1.200319] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 1.200825] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 1.201043] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.201164] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.201280] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.201439] pci 0000:00:09.0: enabling Extended Tags [ 1.201671] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.202046] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 1.202255] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.202373] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.202488] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.202646] pci 0000:00:0a.0: enabling Extended Tags [ 1.202863] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.204101] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 1.204825] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 1.205317] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 1.205796] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 1.206311] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 1.206797] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 1.207346] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 1.209553] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.210117] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 1.213487] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.214105] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 1.216621] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.216849] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 1.217194] pci 0000:00:12.2: supports D1 D2 [ 1.217297] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.217613] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.217810] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 1.218180] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.218366] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 1.218767] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.218842] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 1.219164] pci 0000:00:13.2: supports D1 D2 [ 1.219274] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.219578] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 1.220092] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 1.220277] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 1.220406] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 1.220533] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 1.220660] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 1.220785] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 1.220854] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 1.220965] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 1.221076] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 1.221205] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 1.221534] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 1.222054] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 1.222282] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.222416] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.222568] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.222887] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 1.223073] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 1.223479] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 1.223913] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 1.224227] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 1.224560] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 1.224931] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 1.225328] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 1.225795] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.225995] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 1.226157] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 1.226291] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 1.226662] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.229882] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.231058] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.231250] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 1.231411] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 1.231544] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 1.231917] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.234855] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.235067] pci_bus 0000:03: extended config space not accessible [ 1.235247] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 1.235440] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 1.235578] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 1.235711] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 1.236940] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.237380] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.237518] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.237663] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.237801] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.237948] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 1.238102] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 1.238317] pci_bus 0000:00: on NUMA node 0 [ 1.238969] xen: registering gsi 13 triggering 1 polarity 0 [ 1.239491] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.239686] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 1.239880] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 1.240073] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 1.240266] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 1.240457] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.240646] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.240834] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 1.241141] xen:balloon: Initialising balloon driver [ 1.242024] iommu: Default domain type: Translated [ 1.242024] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.242051] SCSI subsystem initialized [ 1.242885] libata version 3.00 loaded. [ 1.242885] ACPI: bus type USB registered [ 1.243026] usbcore: registered new interface driver usbfs [ 1.243143] usbcore: registered new interface driver hub [ 1.243143] usbcore: registered new device driver usb [ 1.243143] pps_core: LinuxPPS API ver. 1 registered [ 1.243143] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.243200] PTP clock support registered [ 1.243867] Advanced Linux Sound Architecture Driver Initialized. [ 1.244121] NetLabel: Initializing [ 1.244221] NetLabel: domain hash size = 128 [ 1.244322] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.244449] NetLabel: unlabeled traffic allowed by default [ 1.245043] PCI: Using ACPI for IRQ routing [ 1.269024] PCI: pci_cache_line_size set to 64 bytes [ 1.269200] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 1.269205] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 1.269889] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 1.269950] pci 0000:03:04.0: vgaarb: bridge control possible [ 1.270065] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.270211] vgaarb: loaded [ 1.272397] clocksource: Switched to clocksource tsc-early [ 1.273035] VFS: Disk quotas dquot_6.6.0 [ 1.273287] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.273670] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.273983] pnp: PnP ACPI init [ 1.274435] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 1.274692] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 1.275220] xen: registering gsi 8 triggering 1 polarity 0 [ 1.275467] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 1.275810] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.275928] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.276443] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 1.276554] system 00:05: [io 0x0550-0x0551] has been reserved [ 1.276664] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 1.276774] system 00:05: [io 0x040b] has been reserved [ 1.276894] system 00:05: [io 0x04d6] has been reserved [ 1.277002] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 1.277111] system 00:05: [io 0x0c14] has been reserved [ 1.277223] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 1.277333] system 00:05: [io 0x0c52] has been reserved [ 1.277438] system 00:05: [io 0x0c6c] has been reserved [ 1.277544] system 00:05: [io 0x0c6f] has been reserved [ 1.277650] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 1.277758] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 1.277878] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 1.277990] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 1.278099] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 1.278207] system 00:05: [io 0x0800-0x089f] has been reserved [ 1.278316] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 1.278424] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 1.278533] system 00:05: [io 0x0900-0x090f] has been reserved [ 1.278663] system 00:05: [io 0x0910-0x091f] has been reserved [ 1.278772] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 1.278893] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.279004] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.279117] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 1.279509] xen: registering gsi 4 triggering 1 polarity 0 [ 1.279513] Already setup the GSI :4 [ 1.279613] pnp 00:06: [dma 0 disabled] [ 1.279996] xen: registering gsi 3 triggering 1 polarity 0 [ 1.280003] pnp 00:07: [dma 0 disabled] [ 1.280171] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 1.280588] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 1.280778] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.280906] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.281019] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.281133] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.281453] pnp: PnP ACPI: found 10 devices [ 1.303831] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.304092] NET: Registered PF_INET protocol family [ 1.304317] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.304889] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.305056] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.305256] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.305443] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.305659] TCP: Hash tables configured (established 4096 bind 4096) [ 1.305841] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.305969] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.306144] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.306909] RPC: Registered named UNIX socket transport module. [ 1.307027] RPC: Registered udp transport module. [ 1.307135] RPC: Registered tcp transport module. [ 1.307243] RPC: Registered tcp-with-tls transport module. [ 1.307360] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.308142] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.308294] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.308414] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.308542] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.308649] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.308766] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.309022] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.309422] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.309819] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.309983] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.310094] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.310204] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.310316] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.310436] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.310550] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.310656] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.310765] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.310878] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 1.310989] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 1.311100] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 1.311212] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 1.311322] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 1.311430] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.311542] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.311654] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.312024] xen: registering gsi 16 triggering 0 polarity 1 [ 1.312108] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.962113] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 634991 usecs [ 1.962368] xen: registering gsi 16 triggering 0 polarity 1 [ 1.962381] Already setup the GSI :16 [ 1.987083] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24192 usecs [ 1.987343] xen: registering gsi 17 triggering 0 polarity 1 [ 1.987421] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.987604] xen: registering gsi 18 triggering 0 polarity 1 [ 1.987622] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.013028] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 24881 usecs [ 2.013267] xen: registering gsi 18 triggering 0 polarity 1 [ 2.013283] Already setup the GSI :18 [ 2.038037] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24244 usecs [ 2.038278] xen: registering gsi 19 triggering 0 polarity 1 [ 2.038408] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.038680] xen: registering gsi 18 triggering 0 polarity 1 [ 2.038685] Already setup the GSI :18 [ 2.064100] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 24892 usecs [ 2.064329] PCI: CLS 64 bytes, default 64 [ 2.064469] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.064581] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 2.064636] Unpacking initramfs... [ 2.064879] kvm_intel: VMX not supported by CPU 3 [ 2.065006] kvm_amd: SVM not supported by CPU 3 [ 2.065110] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb38081cf2, max_idle_ns: 440795365428 ns [ 2.065360] clocksource: Switched to clocksource tsc [ 2.074885] Initialise system trusted keyrings [ 2.075617] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 2.076258] NFS: Registering the id_resolver key type [ 2.076535] Key type id_resolver registered [ 2.076923] Key type id_legacy registered [ 2.077943] 9p: Installing v9fs 9p2000 file system support [ 2.109773] Key type asymmetric registered [ 2.110230] Asymmetric key parser 'x509' registered [ 2.110951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.111615] io scheduler mq-deadline registered [ 2.112004] io scheduler kyber registered [ 2.114779] xen: registering gsi 53 triggering 0 polarity 1 [ 2.115016] xen: --> pirq=53 -> irq=53 (gsi=53) [ 2.117595] xen: registering gsi 54 triggering 0 polarity 1 [ 2.117783] xen: --> pirq=54 -> irq=54 (gsi=54) [ 2.121136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.122078] ACPI: button: Power Button [PWRB] [ 2.122942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.124148] ACPI: button: Power Button [PWRF] [ 2.128025] ACPI: \_PR_.P001: Found 2 idle states [ 2.128696] ACPI: \_PR_.P002: Found 2 idle states [ 2.129196] ACPI: \_PR_.P003: Found 2 idle states [ 2.131788] ACPI: \_PR_.P004: Found 2 idle states [ 2.132727] ACPI: \_PR_.P005: Found 2 idle states [ 2.133758] ACPI: \_PR_.P006: Found 2 idle states [ 2.136811] xen:xen_evtchn: Event-channel device installed [ 2.137180] xen_pciback: backend is vpci [ 2.140097] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.140625] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.141673] hpet_acpi_add: no address or irqs in _CRS [ 2.141871] Non-volatile memory driver v1.3 [ 2.148308] loop: module loaded [ 2.159658] ahci 0000:00:11.0: version 3.0 [ 2.159849] xen: registering gsi 22 triggering 0 polarity 1 [ 2.159906] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.160116] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 2.160305] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.160445] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.162277] scsi host0: ahci [ 2.162768] scsi host1: ahci [ 2.163122] scsi host2: ahci [ 2.163552] scsi host3: ahci [ 2.163722] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 2.163871] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 2.164033] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 2.164186] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 2.164821] tun: Universal TUN/TAP device driver, 1.6 [ 2.165367] e100: Intel(R) PRO/100 Network Driver [ 2.165835] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.166420] sky2: driver version 1.30 [ 2.167692] xen_netfront: Initialising Xen virtual ethernet driver [ 2.169819] xen: registering gsi 17 triggering 0 polarity 1 [ 2.169833] Already setup the GSI :17 [ 2.169864] xen: registering gsi 16 triggering 0 polarity 1 [ 2.169952] Already setup the GSI :16 [ 2.169964] xen: registering gsi 19 triggering 0 polarity 1 [ 2.170037] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.170210] Already setup the GSI :19 [ 2.170282] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.170493] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.170669] ehci-pci 0000:00:12.2: debug port 1 [ 2.170955] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 2.177522] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.177827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 2.177975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.178116] usb usb1: Product: EHCI Host Controller [ 2.178221] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 2.178329] usb usb1: SerialNumber: 0000:00:12.2 [ 2.178748] hub 1-0:1.0: USB hub found [ 2.178861] hub 1-0:1.0: 6 ports detected [ 2.179322] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.179659] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 2.179922] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 2.235926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.236114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.236256] usb usb2: Product: OHCI PCI host controller [ 2.236369] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.236504] usb usb2: SerialNumber: 0000:00:12.0 [ 2.237054] hub 2-0:1.0: USB hub found [ 2.237264] hub 2-0:1.0: 3 ports detected [ 2.237794] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.237931] xen: registering gsi 16 triggering 0 polarity 1 [ 2.237946] Already setup the GSI :16 [ 2.238080] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.238236] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.238406] ehci-pci 0000:00:13.2: debug port 1 [ 2.238668] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 2.245521] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.245862] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 2.246044] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.246191] usb usb3: Product: EHCI Host Controller [ 2.246307] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 2.246463] usb usb3: SerialNumber: 0000:00:13.2 [ 2.247529] hub 3-0:1.0: USB hub found [ 2.247672] hub 3-0:1.0: 6 ports detected [ 2.248097] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.248550] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.248799] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.304869] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.305099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.305241] usb usb4: Product: OHCI PCI host controller [ 2.305347] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.305476] usb usb4: SerialNumber: 0000:00:12.1 [ 2.305958] hub 4-0:1.0: USB hub found [ 2.306133] hub 4-0:1.0: 3 ports detected [ 2.306910] xen: registering gsi 18 triggering 0 polarity 1 [ 2.306923] Already setup the GSI :18 [ 2.307150] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.307457] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.307737] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.363778] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.363960] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.364101] usb usb5: Product: OHCI PCI host controller [ 2.364207] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.364320] usb usb5: SerialNumber: 0000:00:13.0 [ 2.364870] hub 5-0:1.0: USB hub found [ 2.365051] hub 5-0:1.0: 3 ports detected [ 2.365683] xen: registering gsi 18 triggering 0 polarity 1 [ 2.365695] Already setup the GSI :18 [ 2.365877] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.366090] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.366299] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.403034] Freeing initrd memory: 20188K [ 2.421783] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.421970] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.422111] usb usb6: Product: OHCI PCI host controller [ 2.422220] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.422328] usb usb6: SerialNumber: 0000:00:13.1 [ 2.422826] hub 6-0:1.0: USB hub found [ 2.422992] hub 6-0:1.0: 3 ports detected [ 2.423579] xen: registering gsi 18 triggering 0 polarity 1 [ 2.423591] Already setup the GSI :18 [ 2.423761] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.424040] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.424255] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.471548] ata4: SATA link down (SStatus 0 SControl 300) [ 2.472472] ata3: SATA link down (SStatus 0 SControl 300) [ 2.479739] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.479929] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.480069] usb usb7: Product: OHCI PCI host controller [ 2.480182] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.480305] usb usb7: SerialNumber: 0000:00:14.5 [ 2.480921] hub 7-0:1.0: USB hub found [ 2.481087] hub 7-0:1.0: 2 ports detected [ 2.481635] usbcore: registered new interface driver usblp [ 2.481767] usbcore: registered new interface driver usb-storage [ 2.481926] i8042: PNP: No PS/2 controller found. [ 2.482037] i8042: Probing ports directly. [ 2.485196] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.485308] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.485747] rtc_cmos 00:02: RTC can wake from S4 [ 2.486356] rtc_cmos 00:02: registered as rtc0 [ 2.486545] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.486745] device-mapper: uevent: version 1.0.3 [ 2.486987] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.487145] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.487307] hid: raw HID events driver (C) Jiri Kosina [ 2.487648] usbcore: registered new interface driver usbhid [ 2.487755] usbhid: USB HID core driver [ 2.488485] Initializing XFRM netlink socket [ 2.488609] NET: Registered PF_INET6 protocol family [ 2.489170] Segment Routing with IPv6 [ 2.489284] In-situ OAM (IOAM) with IPv6 [ 2.489437] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.489746] NET: Registered PF_PACKET protocol family [ 2.489898] 9pnet: Installing 9P2000 support [ 2.490055] Key type dns_resolver registered [ 2.490201] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.491317] IPI shorthand broadcast: enabled [ 2.495854] sched_clock: Marking stable (2469004540, 26426550)->(2527706748, -32275658) [ 2.496480] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.497457] registered taskstats version 1 [ 2.497564] Loading compiled-in X.509 certificates [ 2.499902] PM: Magic number: 4:612:989 [ 2.500055] machinecheck machinecheck2: hash matches [ 2.500345] printk: legacy console [netcon0] enabled [ 2.500471] netconsole: network logging started [ 2.502311] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.512176] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.512563] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.513312] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.513500] ALSA device list: [ 2.513595] No soundcards found. [ 2.625502] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.625638] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.627206] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.627654] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.628810] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.629447] ata1.00: configured for UDMA/133 [ 2.629732] ata2.00: configured for UDMA/100 [ 2.629795] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.630697] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.630775] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.631042] sd 0:0:0:0: [sda] Write Protect is off [ 2.631150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.631209] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.631525] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.631711] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.660111] sda: sda1 sda2 < sda5 > [ 2.660584] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.674464] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.674615] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.689882] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.689964] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.691729] Freeing unused kernel image (initmem) memory: 2664K [ 2.691844] Write protecting the kernel read-only data: 22528k [ 2.700948] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.729478] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.805379] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.805499] Run /init as init process [ 2.805594] with arguments: [ 2.805596] /init [ 2.805597] placeholder [ 2.805599] with environment: [ 2.805600] HOME=/ [ 2.805601] TERM=linux [ 2.892520] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.892676] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.892788] usb 6-2: Product: Hermon USB hidmouse Device [ 2.892914] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.898972] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.899379] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.902940] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.954826] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 3.058557] e1000e: Intel(R) PRO/1000 Network Driver [ 3.058678] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.058914] xen: registering gsi 48 triggering 0 polarity 1 [ 3.058958] xen: --> pirq=48 -> irq=48 (gsi=48) [ 3.059217] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.104271] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 3.151115] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2e [ 3.151266] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.151492] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.151705] xen: registering gsi 47 triggering 0 polarity 1 [ 3.151732] xen: --> pirq=47 -> irq=47 (gsi=47) [ 3.151910] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.198519] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 3.248267] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2f [ 3.248448] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.248636] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.250580] e1000e 0000:02:00.0 enx0cc47a0a492f: renamed from eth1 [ 3.250937] e1000e 0000:01:00.0 enx0cc47a0a492e: renamed from eth0 [ 3.363466] random: crng init done [ 3.943712] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.953982] EXT4-fs (dm-0): mounted filesystem 255ef608-580f-4287-b5f2-0eeda0c45c1d ro with ordered data mode. Quota mode: none. [ 7.953324] EXT4-fs (dm-0): re-mounted 255ef608-580f-4287-b5f2-0eeda0c45c1d r/w. Quota mode: none. [ 9.184834] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.208207] EXT4-fs (sda1): mounted filesystem 5ab0b933-1d79-4b75-b02a-9a87fdbb5501 r/w with ordered data mode. Quota mode: none. [ 9.284580] Adding 1949692k swap on /dev/mapper/rimava0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.848278] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 10.848503] xenbr0: port 1(enx0cc47a0a492e) entered disabled state [ 10.848630] e1000e 0000:01:00.0 enx0cc47a0a492e: entered allmulticast mode [ 10.848787] e1000e 0000:01:00.0 enx0cc47a0a492e: entered promiscuous mode [ 14.184489] e1000e 0000:01:00.0 enx0cc47a0a492e: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.185044] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 14.185160] xenbr0: port 1(enx0cc47a0a492e) entered forwarding state