[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 12:50:31 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037586] tsc: Fast TSC calibration using PIT [ 0.037587] tsc: Detected 3100.995 MHz processor [ 0.037589] tsc: Detected 3101.150 MHz TSC [ 0.037795] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037800] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037807] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037811] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037813] MTRRs set to read-only [ 0.037817] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062716] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.062744] ACPI: Early table checksum verification disabled [ 0.064175] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064189] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064235] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064299] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.064312] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064323] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064332] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064344] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064355] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064366] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064376] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064387] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064398] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064409] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064420] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064431] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064442] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064453] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064458] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064461] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064462] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064463] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064465] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064466] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064467] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064468] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064469] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064471] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064472] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064473] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064474] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064476] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064477] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064609] APIC: Switched APIC routing to: Xen PV [ 0.066926] Zone ranges: [ 0.066928] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.066931] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.066933] Normal empty [ 0.066935] Movable zone start for each node [ 0.066936] Early memory node ranges [ 0.066937] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.066940] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.066943] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.066958] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.067099] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072820] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072839] p2m virtual area at (____ptrval____), size is 40000000 [ 0.280191] Remapped 106 page(s) [ 0.280714] ACPI: PM-Timer IO Port: 0x808 [ 0.280750] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280786] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280791] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280816] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280824] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280839] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280846] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280873] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280877] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280891] CPU topo: Max. logical packages: 1 [ 0.280892] CPU topo: Max. logical dies: 1 [ 0.280893] CPU topo: Max. dies per package: 1 [ 0.280900] CPU topo: Max. threads per core: 1 [ 0.280902] CPU topo: Num. cores per package: 6 [ 0.280903] CPU topo: Num. threads per package: 6 [ 0.280904] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280905] CPU topo: Rejected CPUs 2 [ 0.280925] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.280928] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.280931] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.280937] Booting kernel on Xen [ 0.280938] Xen version: 4.19-unstable (preserve-AD) [ 0.280944] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.287278] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288617] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u262144 [ 0.288627] pcpu-alloc: s194344 r8192 d30936 u262144 alloc=1*2097152 [ 0.288632] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288737] xen: PV spinlocks enabled [ 0.288741] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288745] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.288842] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.288910] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.289057] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.289320] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.289325] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.289329] software IO TLB: area num 8. [ 0.428949] Memory: 388040K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135992K reserved, 0K cma-reserved) [ 0.429100] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.432224] Dynamic Preempt: voluntary [ 0.432373] rcu: Preemptible hierarchical RCU implementation. [ 0.432375] rcu: RCU event tracing is enabled. [ 0.432376] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.432379] Trampoline variant of Tasks RCU enabled. [ 0.432381] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.432382] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.432402] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.439183] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.439362] xen:events: Using FIFO-based ABI [ 0.439402] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.439408] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.439422] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.439428] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.439434] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.439439] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.439445] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.439450] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.439455] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.439460] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.439466] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.439471] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.439476] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.439481] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.439486] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.439501] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.445567] Console: colour VGA+ 80x25 [ 0.445573] printk: legacy console [tty0] enabled [ 0.458980] printk: legacy console [hvc0] enabled [ 0.459637] ACPI: Core revision 20230628 [ 0.465420] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.465578] Xen: using vcpuop timer interface [ 0.465585] installing Xen timer for CPU 0 [ 0.465837] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb3865c756, max_idle_ns: 440795330788 ns [ 0.466004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.30 BogoMIPS (lpj=3101150) [ 0.466199] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.466415] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.466526] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.466641] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.467015] Spectre V2 : Mitigation: Retpolines [ 0.467118] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.467260] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.467369] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.467479] RETBleed: Mitigation: untrained return thunk [ 0.467587] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.467748] Speculative Store Bypass: Vulnerable [ 0.467878] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.468005] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.468114] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.468224] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.468333] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.495524] Freeing SMP alternatives memory: 40K [ 0.495678] pid_max: default: 32768 minimum: 301 [ 0.495843] LSM: initializing lsm=capability,selinux [ 0.495965] SELinux: Initializing. [ 0.496075] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.496224] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.497142] cpu 0 spinlock event irq 57 [ 0.497257] VPMU disabled by hypervisor. [ 0.497719] Performance Events: PMU not available due to virtualization, using software events only. [ 0.497879] signal: max sigframe size: 1776 [ 0.498034] rcu: Hierarchical SRCU implementation. [ 0.499005] rcu: Max phase no-delay instances is 400. [ 0.505009] smp: Bringing up secondary CPUs ... [ 0.505344] installing Xen timer for CPU 1 [ 0.505828] installing Xen timer for CPU 2 [ 0.506218] installing Xen timer for CPU 3 [ 0.506628] installing Xen timer for CPU 4 [ 0.507015] installing Xen timer for CPU 5 [ 0.027493] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.507257] cpu 1 spinlock event irq 87 [ 0.027493] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.508116] cpu 2 spinlock event irq 88 [ 0.027493] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.509238] cpu 3 spinlock event irq 89 [ 0.027493] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0014 [ 0.510051] cpu 4 spinlock event irq 90 [ 0.027493] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0015 [ 0.511416] cpu 5 spinlock event irq 91 [ 0.512267] smp: Brought up 1 node, 6 CPUs [ 0.513380] devtmpfs: initialized [ 0.513380] x86/mm: Memory block size: 128MB [ 0.514461] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.514461] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.515009] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.515286] PM: RTC time: 14:38:21, date: 2024-04-24 [ 0.515662] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.515798] xen:grant_table: Grant tables using version 1 layout [ 0.515962] Grant table initialized [ 0.516331] audit: initializing netlink subsys (disabled) [ 0.517108] audit: type=2000 audit(1713969502.134:1): state=initialized audit_enabled=0 res=1 [ 0.517370] thermal_sys: Registered thermal governor 'step_wise' [ 0.517370] thermal_sys: Registered thermal governor 'user_space' [ 0.518314] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.518591] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.588459] PCI: Using configuration type 1 for base access [ 0.588670] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.591115] ACPI: Added _OSI(Module Device) [ 0.591233] ACPI: Added _OSI(Processor Device) [ 0.591376] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.591479] ACPI: Added _OSI(Processor Aggregator Device) [ 0.602524] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.603195] xen: registering gsi 9 triggering 0 polarity 1 [ 0.607430] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.607430] ACPI: Interpreter enabled [ 0.607430] ACPI: PM: (supports S0 S1 S4 S5) [ 0.607430] ACPI: Using IOAPIC for interrupt routing [ 0.607480] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.607629] PCI: Using E820 reservations for host bridge windows [ 0.607909] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.619661] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.619784] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.619937] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.620005] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.620147] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.620621] PCI host bridge to bus 0000:00 [ 0.620723] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.620881] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.620998] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.621138] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.621279] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.621421] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.621582] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.622135] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.622639] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.622847] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.622970] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.623010] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.623170] pci 0000:00:09.0: enabling Extended Tags [ 0.623389] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.623687] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.623896] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.624016] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.624132] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.624292] pci 0000:00:0a.0: enabling Extended Tags [ 0.624509] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.624813] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.625007] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.625135] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.625263] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.625390] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.625518] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.625645] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.625988] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.626045] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.626428] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.626615] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.627017] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.627205] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.627567] pci 0000:00:12.2: supports D1 D2 [ 0.627669] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.627933] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.628046] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.628418] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.628604] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.629040] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.629227] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.629549] pci 0000:00:13.2: supports D1 D2 [ 0.629651] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.629928] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.630399] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.630585] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.630712] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.630840] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.630967] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.631026] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.631185] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.631298] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.631446] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.631558] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.631851] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.632335] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.632563] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.632690] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.632818] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.633108] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.633295] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.633692] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.634077] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.634394] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.634703] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.635053] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.635420] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.635885] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.636054] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.636217] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.636349] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.636708] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.640070] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.640416] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.640610] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.640772] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.640946] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.641278] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.645082] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.645286] pci_bus 0000:03: extended config space not accessible [ 0.645488] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.645680] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.645817] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.645949] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.647158] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.647597] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.647731] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.647878] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.648004] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.648152] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.648301] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.648545] pci_bus 0000:00: on NUMA node 0 [ 0.649207] xen: registering gsi 13 triggering 1 polarity 0 [ 0.649731] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.649966] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.650090] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.650280] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.650473] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.650659] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.650847] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.651039] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.651383] xen:balloon: Initialising balloon driver [ 0.652142] iommu: Default domain type: Translated [ 0.652146] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.652390] SCSI subsystem initialized [ 0.653091] libata version 3.00 loaded. [ 0.653091] ACPI: bus type USB registered [ 0.653219] usbcore: registered new interface driver usbfs [ 0.653219] usbcore: registered new interface driver hub [ 0.653219] usbcore: registered new device driver usb [ 0.653263] pps_core: LinuxPPS API ver. 1 registered [ 0.653368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.653529] PTP clock support registered [ 0.654301] Advanced Linux Sound Architecture Driver Initialized. [ 0.655177] NetLabel: Initializing [ 0.655276] NetLabel: domain hash size = 128 [ 0.655377] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.655506] NetLabel: unlabeled traffic allowed by default [ 0.656186] PCI: Using ACPI for IRQ routing [ 0.681911] PCI: pci_cache_line_size set to 64 bytes [ 0.682111] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.682119] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.682210] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.682225] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.682334] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.682483] vgaarb: loaded [ 0.684537] clocksource: Switched to clocksource tsc-early [ 0.831353] VFS: Disk quotas dquot_6.6.0 [ 0.832071] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.832246] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.832436] pnp: PnP ACPI init [ 0.832990] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.833300] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.833823] xen: registering gsi 8 triggering 1 polarity 0 [ 0.834207] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.834563] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.834679] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.835247] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.835362] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.835471] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.835585] system 00:05: [io 0x040b] has been reserved [ 0.835705] system 00:05: [io 0x04d6] has been reserved [ 0.835811] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.835920] system 00:05: [io 0x0c14] has been reserved [ 0.836064] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.836181] system 00:05: [io 0x0c52] has been reserved [ 0.836288] system 00:05: [io 0x0c6c] has been reserved [ 0.836394] system 00:05: [io 0x0c6f] has been reserved [ 0.836500] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.836611] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.836720] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.836829] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.836942] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.837067] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.837346] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.837840] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.838112] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.838218] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.838327] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.838449] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.838561] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.838673] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.839145] xen: registering gsi 4 triggering 1 polarity 0 [ 0.839150] Already setup the GSI :4 [ 0.839252] pnp 00:06: [dma 0 disabled] [ 0.839607] xen: registering gsi 3 triggering 1 polarity 0 [ 0.839615] pnp 00:07: [dma 0 disabled] [ 0.839787] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.840206] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.840393] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.840511] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.840638] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.840766] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.841126] pnp: PnP ACPI: found 10 devices [ 0.863162] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.863408] NET: Registered PF_INET protocol family [ 0.863726] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.864214] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.864363] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.864507] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.864740] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.865034] TCP: Hash tables configured (established 4096 bind 4096) [ 0.865270] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.865388] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.865630] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.866067] RPC: Registered named UNIX socket transport module. [ 0.866181] RPC: Registered udp transport module. [ 0.866285] RPC: Registered tcp transport module. [ 0.866387] RPC: Registered tcp-with-tls transport module. [ 0.866493] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.867151] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.867299] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.867461] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.867598] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.867720] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.867851] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.867989] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.868156] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.868276] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.868434] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.868547] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.868656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.868774] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.868895] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.869017] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.869158] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.869268] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.869373] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.869484] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.869607] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.869732] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.869854] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.869970] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.870132] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.870244] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.870567] xen: registering gsi 16 triggering 0 polarity 1 [ 0.870701] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.520732] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635037 usecs [ 1.521291] xen: registering gsi 16 triggering 0 polarity 1 [ 1.521305] Already setup the GSI :16 [ 1.547287] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 25474 usecs [ 1.547545] xen: registering gsi 17 triggering 0 polarity 1 [ 1.547647] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.547844] xen: registering gsi 18 triggering 0 polarity 1 [ 1.547863] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.572335] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23969 usecs [ 1.572607] xen: registering gsi 18 triggering 0 polarity 1 [ 1.572621] Already setup the GSI :18 [ 1.597933] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24783 usecs [ 1.598931] xen: registering gsi 19 triggering 0 polarity 1 [ 1.599065] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.599295] xen: registering gsi 18 triggering 0 polarity 1 [ 1.599301] Already setup the GSI :18 [ 1.623636] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23810 usecs [ 1.624234] PCI: CLS 64 bytes, default 64 [ 1.624355] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.624467] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.624488] Unpacking initramfs... [ 1.624717] kvm_intel: VMX not supported by CPU 3 [ 1.624883] kvm_amd: SVM not supported by CPU 3 [ 1.624995] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb3865c756, max_idle_ns: 440795330788 ns [ 1.625309] clocksource: Switched to clocksource tsc [ 1.633969] Initialise system trusted keyrings [ 1.634778] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.635666] NFS: Registering the id_resolver key type [ 1.635848] Key type id_resolver registered [ 1.635950] Key type id_legacy registered [ 1.636150] 9p: Installing v9fs 9p2000 file system support [ 1.668945] Key type asymmetric registered [ 1.669415] Asymmetric key parser 'x509' registered [ 1.670067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.670719] io scheduler mq-deadline registered [ 1.671136] io scheduler kyber registered [ 1.673805] xen: registering gsi 53 triggering 0 polarity 1 [ 1.674044] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.676638] xen: registering gsi 54 triggering 0 polarity 1 [ 1.676830] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.680129] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.681018] ACPI: button: Power Button [PWRB] [ 1.681884] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.683012] ACPI: button: Power Button [PWRF] [ 1.686015] ACPI: \_PR_.P001: Found 2 idle states [ 1.686706] ACPI: \_PR_.P002: Found 2 idle states [ 1.687222] ACPI: \_PR_.P003: Found 2 idle states [ 1.689780] ACPI: \_PR_.P004: Found 2 idle states [ 1.690818] ACPI: \_PR_.P005: Found 2 idle states [ 1.691822] ACPI: \_PR_.P006: Found 2 idle states [ 1.694380] xen:xen_evtchn: Event-channel device installed [ 1.694714] xen_pciback: backend is vpci [ 1.695800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.696316] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.697267] hpet_acpi_add: no address or irqs in _CRS [ 1.697446] Non-volatile memory driver v1.3 [ 1.703261] loop: module loaded [ 1.730205] ahci 0000:00:11.0: version 3.0 [ 1.730392] xen: registering gsi 22 triggering 0 polarity 1 [ 1.730442] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.730668] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.730836] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.730949] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.733192] scsi host0: ahci [ 1.734939] scsi host1: ahci [ 1.735987] scsi host2: ahci [ 1.737036] scsi host3: ahci [ 1.737268] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.737419] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.737612] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.737764] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.738552] tun: Universal TUN/TAP device driver, 1.6 [ 1.738861] e100: Intel(R) PRO/100 Network Driver [ 1.738968] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.739090] sky2: driver version 1.30 [ 1.739249] xen_netfront: Initialising Xen virtual ethernet driver [ 1.739835] xen: registering gsi 16 triggering 0 polarity 1 [ 1.739852] Already setup the GSI :16 [ 1.740018] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.740298] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.740551] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.740699] xen: registering gsi 19 triggering 0 polarity 1 [ 1.740710] xen: registering gsi 17 triggering 0 polarity 1 [ 1.740715] Already setup the GSI :19 [ 1.740716] Already setup the GSI :17 [ 1.797447] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.797813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.798400] usb usb1: Product: OHCI PCI host controller [ 1.798883] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.799361] usb usb1: SerialNumber: 0000:00:12.0 [ 1.800843] hub 1-0:1.0: USB hub found [ 1.801003] hub 1-0:1.0: 3 ports detected [ 1.801765] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.801987] xen: registering gsi 16 triggering 0 polarity 1 [ 1.802014] Already setup the GSI :16 [ 1.802040] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.802569] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.802739] ehci-pci 0000:00:12.2: debug port 1 [ 1.803014] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.809589] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.810075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.810261] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.810443] usb usb2: Product: EHCI Host Controller [ 1.810566] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.810675] usb usb2: SerialNumber: 0000:00:12.2 [ 1.811148] hub 2-0:1.0: USB hub found [ 1.811289] hub 2-0:1.0: 6 ports detected [ 1.857937] Freeing initrd memory: 20188K [ 1.863894] hub 1-0:1.0: USB hub found [ 1.864108] hub 1-0:1.0: 3 ports detected [ 1.864911] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.866001] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.866446] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.867089] ehci-pci 0000:00:13.2: debug port 1 [ 1.868028] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.874720] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.875754] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.875932] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.876071] usb usb3: Product: EHCI Host Controller [ 1.876176] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.876289] usb usb3: SerialNumber: 0000:00:13.2 [ 1.877084] hub 3-0:1.0: USB hub found [ 1.877229] hub 3-0:1.0: 6 ports detected [ 1.877853] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.878159] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.878408] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.935520] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.935707] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.935848] usb usb4: Product: OHCI PCI host controller [ 1.935957] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.936066] usb usb4: SerialNumber: 0000:00:12.1 [ 1.937019] hub 4-0:1.0: USB hub found [ 1.937187] hub 4-0:1.0: 3 ports detected [ 1.937875] xen: registering gsi 18 triggering 0 polarity 1 [ 1.937891] Already setup the GSI :18 [ 1.938097] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.938465] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.938726] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.994892] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.995078] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.995219] usb usb5: Product: OHCI PCI host controller [ 1.995330] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.995439] usb usb5: SerialNumber: 0000:00:13.0 [ 1.996012] hub 5-0:1.0: USB hub found [ 1.996179] hub 5-0:1.0: 3 ports detected [ 1.996797] xen: registering gsi 18 triggering 0 polarity 1 [ 1.996809] Already setup the GSI :18 [ 1.996979] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.997194] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.997399] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.048163] ata4: SATA link down (SStatus 0 SControl 300) [ 2.049224] ata3: SATA link down (SStatus 0 SControl 300) [ 2.053778] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.053955] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.054097] usb usb6: Product: OHCI PCI host controller [ 2.054203] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.054310] usb usb6: SerialNumber: 0000:00:13.1 [ 2.054740] hub 6-0:1.0: USB hub found [ 2.054853] hub 6-0:1.0: 3 ports detected [ 2.055385] xen: registering gsi 18 triggering 0 polarity 1 [ 2.055397] Already setup the GSI :18 [ 2.055599] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.055814] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.056020] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.111871] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.112092] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.112233] usb usb7: Product: OHCI PCI host controller [ 2.112339] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.112452] usb usb7: SerialNumber: 0000:00:14.5 [ 2.113319] hub 7-0:1.0: USB hub found [ 2.113464] hub 7-0:1.0: 2 ports detected [ 2.114073] usbcore: registered new interface driver usblp [ 2.114210] usbcore: registered new interface driver usb-storage [ 2.114375] i8042: PNP: No PS/2 controller found. [ 2.114478] i8042: Probing ports directly. [ 2.117465] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.117594] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.118253] rtc_cmos 00:02: RTC can wake from S4 [ 2.118871] rtc_cmos 00:02: registered as rtc0 [ 2.119030] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.119188] device-mapper: uevent: version 1.0.3 [ 2.119729] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.119889] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.120052] hid: raw HID events driver (C) Jiri Kosina [ 2.120370] usbcore: registered new interface driver usbhid [ 2.120477] usbhid: USB HID core driver [ 2.121283] Initializing XFRM netlink socket [ 2.121406] NET: Registered PF_INET6 protocol family [ 2.122761] Segment Routing with IPv6 [ 2.122913] In-situ OAM (IOAM) with IPv6 [ 2.123098] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.123444] NET: Registered PF_PACKET protocol family [ 2.123606] 9pnet: Installing 9P2000 support [ 2.123737] Key type dns_resolver registered [ 2.123860] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.125605] IPI shorthand broadcast: enabled [ 2.165200] sched_clock: Marking stable (2138037243, 26493244)->(2176643302, -12112815) [ 2.167853] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.169181] registered taskstats version 1 [ 2.169676] Loading compiled-in X.509 certificates [ 2.193489] PM: Magic number: 4:856:637 [ 2.193989] hub 6-0:1.0: hash matches [ 2.196116] printk: legacy console [netcon0] enabled [ 2.196480] netconsole: network logging started [ 2.197951] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.209550] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.210593] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.211246] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.211285] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.211672] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.212433] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.212552] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.212649] ALSA device list: [ 2.212851] No soundcards found. [ 2.213743] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.214704] ata2.00: configured for UDMA/100 [ 2.215144] ata1.00: configured for UDMA/133 [ 2.216165] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.217541] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.217683] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.217921] sd 0:0:0:0: [sda] Write Protect is off [ 2.218174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.218276] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.218543] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.218981] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.245184] sda: sda1 sda2 < sda5 > [ 2.246145] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.254786] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.254980] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.267578] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.268002] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.271269] Freeing unused kernel image (initmem) memory: 2664K [ 2.271410] Write protecting the kernel read-only data: 22528k [ 2.281356] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.361720] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.406672] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.407082] Run /init as init process [ 2.407415] with arguments: [ 2.407429] /init [ 2.407438] placeholder [ 2.407450] with environment: [ 2.407461] HOME=/ [ 2.407472] TERM=linux [ 2.524655] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.524814] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.524926] usb 6-2: Product: Hermon USB hidmouse Device [ 2.525034] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.531012] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.531390] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.535028] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.586844] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.728286] e1000e: Intel(R) PRO/1000 Network Driver [ 2.728438] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.728683] xen: registering gsi 48 triggering 0 polarity 1 [ 2.731129] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.731350] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.776337] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.823145] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.823296] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.823486] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.823707] xen: registering gsi 47 triggering 0 polarity 1 [ 2.823735] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.823917] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.871559] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.921265] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.921413] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.921623] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.923396] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.923722] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.018539] random: crng init done [ 3.677106] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.682343] EXT4-fs (dm-0): mounted filesystem de708a2a-1556-49f1-bb0b-4fdf8baeac1a ro with ordered data mode. Quota mode: none. [ 7.899123] EXT4-fs (dm-0): re-mounted de708a2a-1556-49f1-bb0b-4fdf8baeac1a r/w. Quota mode: none. [ 9.560220] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.569254] EXT4-fs (sda1): mounted filesystem 1d3d6440-82c5-4b64-b493-e40161fd667e r/w with ordered data mode. Quota mode: none. [ 9.653363] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.202776] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 11.202915] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 11.203044] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 11.203198] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 14.292562] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.293117] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 14.293234] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state