[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 12:50:31 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.040591] tsc: Fast TSC calibration using PIT [ 0.040593] tsc: Detected 3101.360 MHz processor [ 0.040595] tsc: Detected 3101.130 MHz TSC [ 0.040800] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.040804] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.040811] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.040816] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.040818] MTRRs set to read-only [ 0.040822] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065716] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.065742] ACPI: Early table checksum verification disabled [ 0.067183] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.067196] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.067240] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.067303] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.067315] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.067327] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.067337] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.067348] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.067359] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.067371] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.067383] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.067393] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.067404] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.067415] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.067426] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.067438] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.067449] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.067460] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.067465] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.067468] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.067469] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067471] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.067472] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.067473] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.067474] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.067475] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.067477] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.067478] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.067479] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.067480] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.067481] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.067482] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.067484] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.067620] APIC: Switched APIC routing to: Xen PV [ 0.069854] Zone ranges: [ 0.069856] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069859] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.069861] Normal empty [ 0.069863] Movable zone start for each node [ 0.069864] Early memory node ranges [ 0.069865] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.069867] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.069870] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.069886] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.070009] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.075753] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.075775] p2m virtual area at (____ptrval____), size is 40000000 [ 0.283095] Remapped 106 page(s) [ 0.283617] ACPI: PM-Timer IO Port: 0x808 [ 0.283654] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.283689] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.283694] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.283719] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.283728] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.283741] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.283748] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.283774] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.283779] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.283794] CPU topo: Max. logical packages: 1 [ 0.283795] CPU topo: Max. logical dies: 1 [ 0.283796] CPU topo: Max. dies per package: 1 [ 0.283804] CPU topo: Max. threads per core: 1 [ 0.283806] CPU topo: Num. cores per package: 6 [ 0.283807] CPU topo: Num. threads per package: 6 [ 0.283808] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.283809] CPU topo: Rejected CPUs 2 [ 0.283832] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.283835] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.283838] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.283844] Booting kernel on Xen [ 0.283845] Xen version: 4.19-unstable (preserve-AD) [ 0.283850] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.290173] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.291526] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u262144 [ 0.291537] pcpu-alloc: s194344 r8192 d30936 u262144 alloc=1*2097152 [ 0.291542] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.291645] xen: PV spinlocks enabled [ 0.291650] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.291655] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.291753] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.291821] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.291955] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.292223] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.292229] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.292234] software IO TLB: area num 8. [ 0.431894] Memory: 388040K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135992K reserved, 0K cma-reserved) [ 0.432047] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.435185] Dynamic Preempt: voluntary [ 0.435340] rcu: Preemptible hierarchical RCU implementation. [ 0.435342] rcu: RCU event tracing is enabled. [ 0.435343] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.435345] Trampoline variant of Tasks RCU enabled. [ 0.435347] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.435349] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.435369] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.442114] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.442294] xen:events: Using FIFO-based ABI [ 0.442335] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.442342] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.442355] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.442361] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.442367] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.442372] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.442377] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.442383] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.442388] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.442392] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.442398] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.442403] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.442408] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.442413] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.442418] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.442432] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.448480] Console: colour VGA+ 80x25 [ 0.448486] printk: legacy console [tty0] enabled [ 0.461887] printk: legacy console [hvc0] enabled [ 0.462527] ACPI: Core revision 20230628 [ 0.468308] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.468467] Xen: using vcpuop timer interface [ 0.468474] installing Xen timer for CPU 0 [ 0.468730] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb37355de9, max_idle_ns: 440795306045 ns [ 0.468890] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.26 BogoMIPS (lpj=3101130) [ 0.469095] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.469311] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.469421] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.469535] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.469904] Spectre V2 : Mitigation: Retpolines [ 0.470006] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.470149] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.470260] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.470371] RETBleed: Mitigation: untrained return thunk [ 0.470478] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.470639] Speculative Store Bypass: Vulnerable [ 0.470770] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.470894] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.471003] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.471113] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.471223] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.498299] Freeing SMP alternatives memory: 40K [ 0.498458] pid_max: default: 32768 minimum: 301 [ 0.498619] LSM: initializing lsm=capability,selinux [ 0.498742] SELinux: Initializing. [ 0.498912] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.499060] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.500035] cpu 0 spinlock event irq 57 [ 0.500149] VPMU disabled by hypervisor. [ 0.500609] Performance Events: PMU not available due to virtualization, using software events only. [ 0.500769] signal: max sigframe size: 1776 [ 0.500924] rcu: Hierarchical SRCU implementation. [ 0.501891] rcu: Max phase no-delay instances is 400. [ 0.507953] smp: Bringing up secondary CPUs ... [ 0.508281] installing Xen timer for CPU 1 [ 0.508765] installing Xen timer for CPU 2 [ 0.509198] installing Xen timer for CPU 3 [ 0.509580] installing Xen timer for CPU 4 [ 0.511065] installing Xen timer for CPU 5 [ 0.027449] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.511998] cpu 1 spinlock event irq 87 [ 0.027449] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.512206] cpu 2 spinlock event irq 88 [ 0.027449] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.514149] cpu 3 spinlock event irq 89 [ 0.027449] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0014 [ 0.514941] cpu 4 spinlock event irq 90 [ 0.027449] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0015 [ 0.516202] cpu 5 spinlock event irq 91 [ 0.517255] smp: Brought up 1 node, 6 CPUs [ 0.519303] devtmpfs: initialized [ 0.520190] x86/mm: Memory block size: 128MB [ 0.525435] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.526015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.526173] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.526478] PM: RTC time: 13:12:01, date: 2024-04-24 [ 0.526870] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.526939] xen:grant_table: Grant tables using version 1 layout [ 0.527120] Grant table initialized [ 0.527533] audit: initializing netlink subsys (disabled) [ 0.527653] audit: type=2000 audit(1713964321.401:1): state=initialized audit_enabled=0 res=1 [ 0.529124] thermal_sys: Registered thermal governor 'step_wise' [ 0.529146] thermal_sys: Registered thermal governor 'user_space' [ 0.532788] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.533366] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 1.348929] PCI: Using configuration type 1 for base access [ 1.350159] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.352228] ACPI: Added _OSI(Module Device) [ 1.352619] ACPI: Added _OSI(Processor Device) [ 1.352924] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.353292] ACPI: Added _OSI(Processor Aggregator Device) [ 1.375293] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.380441] xen: registering gsi 9 triggering 0 polarity 1 [ 1.393052] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 1.395826] ACPI: Interpreter enabled [ 1.396022] ACPI: PM: (supports S0 S1 S4 S5) [ 1.396371] ACPI: Using IOAPIC for interrupt routing [ 1.397067] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.397490] PCI: Using E820 reservations for host bridge windows [ 1.399289] ACPI: Enabled 4 GPEs in block 00 to 1F [ 1.437973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.438192] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.438351] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 1.438463] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 1.438608] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 1.439151] PCI host bridge to bus 0000:00 [ 1.439257] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.439369] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.439482] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.439664] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 1.439804] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 1.439892] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.440097] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 1.440669] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 1.441217] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 1.441426] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.441544] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.441662] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.441822] pci 0000:00:09.0: enabling Extended Tags [ 1.442012] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.443186] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 1.443398] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.443520] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.443647] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.443807] pci 0000:00:0a.0: enabling Extended Tags [ 1.444006] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.444330] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 1.444519] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 1.444649] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 1.444777] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 1.444908] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 1.445036] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 1.445170] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 1.445528] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.445715] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 1.446094] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.446326] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 1.446742] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.446933] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 1.447257] pci 0000:00:12.2: supports D1 D2 [ 1.447366] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.447667] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.447853] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 1.448159] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.448351] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 1.448748] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.448933] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 1.449258] pci 0000:00:13.2: supports D1 D2 [ 1.449394] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.449691] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 1.450195] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 1.450428] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 1.450556] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 1.450683] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 1.450809] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 1.450913] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 1.451071] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 1.451187] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 1.451296] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 1.451412] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 1.451755] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 1.452252] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 1.452487] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.452616] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.452736] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.453058] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 1.453245] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 1.453669] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 1.454054] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 1.454385] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 1.454739] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 1.455094] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 1.455456] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 1.455924] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.456116] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 1.456279] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 1.456417] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 1.456778] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.459948] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.460265] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.460462] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 1.460631] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 1.460766] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 1.461181] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.463943] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.464116] pci_bus 0000:03: extended config space not accessible [ 1.464302] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 1.464495] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 1.464633] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 1.464776] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 1.465039] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.465474] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.465607] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.465753] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.465893] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.466040] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 1.466189] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 1.466409] pci_bus 0000:00: on NUMA node 0 [ 1.467029] xen: registering gsi 13 triggering 1 polarity 0 [ 1.467547] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.467739] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 1.467939] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 1.468130] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 1.468321] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 1.468509] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.468700] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.468894] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 1.469235] xen:balloon: Initialising balloon driver [ 1.469366] iommu: Default domain type: Translated [ 1.469894] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.470145] SCSI subsystem initialized [ 1.470265] libata version 3.00 loaded. [ 1.470265] ACPI: bus type USB registered [ 1.470265] usbcore: registered new interface driver usbfs [ 1.470265] usbcore: registered new interface driver hub [ 1.470904] usbcore: registered new device driver usb [ 1.471038] pps_core: LinuxPPS API ver. 1 registered [ 1.471152] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.471303] PTP clock support registered [ 1.471892] Advanced Linux Sound Architecture Driver Initialized. [ 1.472349] NetLabel: Initializing [ 1.472448] NetLabel: domain hash size = 128 [ 1.472552] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.472690] NetLabel: unlabeled traffic allowed by default [ 1.472917] PCI: Using ACPI for IRQ routing [ 1.498157] PCI: pci_cache_line_size set to 64 bytes [ 1.498346] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 1.498350] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 1.498376] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 1.498376] pci 0000:03:04.0: vgaarb: bridge control possible [ 1.498376] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.498892] vgaarb: loaded [ 1.501302] clocksource: Switched to clocksource tsc-early [ 1.501672] VFS: Disk quotas dquot_6.6.0 [ 1.501791] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.501791] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.501791] pnp: PnP ACPI init [ 1.502207] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 1.502557] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 1.503124] xen: registering gsi 8 triggering 1 polarity 0 [ 1.503393] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 1.503861] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.503982] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.504540] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 1.504658] system 00:05: [io 0x0550-0x0551] has been reserved [ 1.504775] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 1.504891] system 00:05: [io 0x040b] has been reserved [ 1.505003] system 00:05: [io 0x04d6] has been reserved [ 1.505116] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 1.505230] system 00:05: [io 0x0c14] has been reserved [ 1.505343] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 1.505466] system 00:05: [io 0x0c52] has been reserved [ 1.505580] system 00:05: [io 0x0c6c] has been reserved [ 1.505693] system 00:05: [io 0x0c6f] has been reserved [ 1.505814] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 1.505932] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 1.506048] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 1.506165] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 1.506281] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 1.506398] system 00:05: [io 0x0800-0x089f] has been reserved [ 1.506523] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 1.506641] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 1.506757] system 00:05: [io 0x0900-0x090f] has been reserved [ 1.506874] system 00:05: [io 0x0910-0x091f] has been reserved [ 1.506993] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 1.507111] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.507233] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.507366] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 1.507807] xen: registering gsi 4 triggering 1 polarity 0 [ 1.507812] Already setup the GSI :4 [ 1.507919] pnp 00:06: [dma 0 disabled] [ 1.508307] xen: registering gsi 3 triggering 1 polarity 0 [ 1.508314] pnp 00:07: [dma 0 disabled] [ 1.508515] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 1.508959] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 1.509156] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.509275] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.509393] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.509519] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.509824] pnp: PnP ACPI: found 10 devices [ 1.529363] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.529588] NET: Registered PF_INET protocol family [ 1.529775] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.530215] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.530374] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.530552] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.530744] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.530946] TCP: Hash tables configured (established 4096 bind 4096) [ 1.531125] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.531240] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.531410] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.531984] RPC: Registered named UNIX socket transport module. [ 1.532101] RPC: Registered udp transport module. [ 1.532218] RPC: Registered tcp transport module. [ 1.532320] RPC: Registered tcp-with-tls transport module. [ 1.532426] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.536993] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.537149] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.537270] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.537398] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.537530] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.537685] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.537814] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.537928] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.538046] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.538204] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.538315] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.538424] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.538542] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.538655] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.538766] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.538873] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.539022] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.539128] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 1.539238] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 1.539347] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 1.539465] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 1.539574] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 1.539682] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.539794] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.539905] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.540256] xen: registering gsi 16 triggering 0 polarity 1 [ 1.540328] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.190698] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635321 usecs [ 2.190952] xen: registering gsi 16 triggering 0 polarity 1 [ 2.190968] Already setup the GSI :16 [ 2.215690] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24213 usecs [ 2.215954] xen: registering gsi 17 triggering 0 polarity 1 [ 2.216038] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.216220] xen: registering gsi 18 triggering 0 polarity 1 [ 2.216239] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.240694] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23950 usecs [ 2.240952] xen: registering gsi 18 triggering 0 polarity 1 [ 2.240966] Already setup the GSI :18 [ 2.266689] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 25190 usecs [ 2.267831] xen: registering gsi 19 triggering 0 polarity 1 [ 2.268023] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.269418] xen: registering gsi 18 triggering 0 polarity 1 [ 2.269446] Already setup the GSI :18 [ 2.295309] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 25715 usecs [ 2.296131] PCI: CLS 64 bytes, default 64 [ 2.296604] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.296737] Unpacking initramfs... [ 2.296968] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 2.297951] kvm_intel: VMX not supported by CPU 0 [ 2.298626] kvm_amd: SVM not supported by CPU 0 [ 2.299211] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb37355de9, max_idle_ns: 440795306045 ns [ 2.300209] clocksource: Switched to clocksource tsc [ 2.308826] Initialise system trusted keyrings [ 2.309449] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 2.310133] NFS: Registering the id_resolver key type [ 2.310287] Key type id_resolver registered [ 2.310388] Key type id_legacy registered [ 2.310792] 9p: Installing v9fs 9p2000 file system support [ 2.331747] Key type asymmetric registered [ 2.331916] Asymmetric key parser 'x509' registered [ 2.332083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.332243] io scheduler mq-deadline registered [ 2.332371] io scheduler kyber registered [ 2.333753] xen: registering gsi 53 triggering 0 polarity 1 [ 2.333828] xen: --> pirq=53 -> irq=53 (gsi=53) [ 2.334165] xen: registering gsi 54 triggering 0 polarity 1 [ 2.334183] xen: --> pirq=54 -> irq=54 (gsi=54) [ 2.335623] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.336417] ACPI: button: Power Button [PWRB] [ 2.337278] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.338365] ACPI: button: Power Button [PWRF] [ 2.342423] ACPI: \_PR_.P001: Found 2 idle states [ 2.343043] ACPI: \_PR_.P002: Found 2 idle states [ 2.343579] ACPI: \_PR_.P003: Found 2 idle states [ 2.346152] ACPI: \_PR_.P004: Found 2 idle states [ 2.347171] ACPI: \_PR_.P005: Found 2 idle states [ 2.348229] ACPI: \_PR_.P006: Found 2 idle states [ 2.351434] xen:xen_evtchn: Event-channel device installed [ 2.352560] xen_pciback: backend is vpci [ 2.354965] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.355572] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.357209] hpet_acpi_add: no address or irqs in _CRS [ 2.357634] Non-volatile memory driver v1.3 [ 2.377582] loop: module loaded [ 2.399449] ahci 0000:00:11.0: version 3.0 [ 2.399657] xen: registering gsi 22 triggering 0 polarity 1 [ 2.399710] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.399915] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 2.400101] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.400222] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.402022] scsi host0: ahci [ 2.402621] scsi host1: ahci [ 2.403172] scsi host2: ahci [ 2.403670] scsi host3: ahci [ 2.403844] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 2.403990] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 2.404141] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 2.404294] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 2.404944] tun: Universal TUN/TAP device driver, 1.6 [ 2.405189] e100: Intel(R) PRO/100 Network Driver [ 2.405293] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.405416] sky2: driver version 1.30 [ 2.405583] xen_netfront: Initialising Xen virtual ethernet driver [ 2.406028] xen: registering gsi 16 triggering 0 polarity 1 [ 2.406038] Already setup the GSI :16 [ 2.406216] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.406469] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 2.406609] xen: registering gsi 17 triggering 0 polarity 1 [ 2.406779] xen: registering gsi 19 triggering 0 polarity 1 [ 2.406795] Already setup the GSI :19 [ 2.407017] Already setup the GSI :17 [ 2.407227] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 2.463669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.463833] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.464009] usb usb1: Product: OHCI PCI host controller [ 2.464111] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.464216] usb usb1: SerialNumber: 0000:00:12.0 [ 2.464632] hub 1-0:1.0: USB hub found [ 2.464782] hub 1-0:1.0: 3 ports detected [ 2.465224] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.465289] xen: registering gsi 16 triggering 0 polarity 1 [ 2.465337] Already setup the GSI :16 [ 2.465541] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.465687] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.465850] ehci-pci 0000:00:13.2: debug port 1 [ 2.466044] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 2.472542] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.472873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 2.473024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.473161] usb usb2: Product: EHCI Host Controller [ 2.473262] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 2.473366] usb usb2: SerialNumber: 0000:00:13.2 [ 2.473745] hub 2-0:1.0: USB hub found [ 2.473875] hub 2-0:1.0: 6 ports detected [ 2.493951] Freeing initrd memory: 20188K [ 2.532800] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.533084] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 2.533268] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.533431] ehci-pci 0000:00:12.2: debug port 1 [ 2.533651] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 2.540479] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.540760] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 2.540910] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.541047] usb usb3: Product: EHCI Host Controller [ 2.541147] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 2.541251] usb usb3: SerialNumber: 0000:00:12.2 [ 2.541581] hub 3-0:1.0: USB hub found [ 2.541707] hub 3-0:1.0: 6 ports detected [ 2.593543] hub 1-0:1.0: USB hub found [ 2.593656] hub 1-0:1.0: 3 ports detected [ 2.594013] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.594249] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.594425] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.650692] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.650867] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.651005] usb usb4: Product: OHCI PCI host controller [ 2.651107] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.651213] usb usb4: SerialNumber: 0000:00:12.1 [ 2.651574] hub 4-0:1.0: USB hub found [ 2.651737] hub 4-0:1.0: 3 ports detected [ 2.652230] xen: registering gsi 18 triggering 0 polarity 1 [ 2.652240] Already setup the GSI :18 [ 2.652381] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.652591] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.652779] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.708641] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.708829] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.708967] usb usb5: Product: OHCI PCI host controller [ 2.709069] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.709173] usb usb5: SerialNumber: 0000:00:13.0 [ 2.709503] hub 5-0:1.0: USB hub found [ 2.709665] hub 5-0:1.0: 3 ports detected [ 2.710080] xen: registering gsi 18 triggering 0 polarity 1 [ 2.710087] Already setup the GSI :18 [ 2.710223] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.710426] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.710623] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.714539] ata4: SATA link down (SStatus 0 SControl 300) [ 2.714682] ata3: SATA link down (SStatus 0 SControl 300) [ 2.766692] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.766838] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.766990] usb usb6: Product: OHCI PCI host controller [ 2.767093] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.767198] usb usb6: SerialNumber: 0000:00:13.1 [ 2.767546] hub 6-0:1.0: USB hub found [ 2.767714] hub 6-0:1.0: 3 ports detected [ 2.768129] xen: registering gsi 18 triggering 0 polarity 1 [ 2.768135] Already setup the GSI :18 [ 2.768307] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.768542] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.768710] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.824709] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.824855] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.825031] usb usb7: Product: OHCI PCI host controller [ 2.825134] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.825237] usb usb7: SerialNumber: 0000:00:14.5 [ 2.825528] hub 7-0:1.0: USB hub found [ 2.825691] hub 7-0:1.0: 2 ports detected [ 2.826088] usbcore: registered new interface driver usblp [ 2.826214] usbcore: registered new interface driver usb-storage [ 2.826355] i8042: PNP: No PS/2 controller found. [ 2.826482] i8042: Probing ports directly. [ 2.829306] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.829412] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.829760] rtc_cmos 00:02: RTC can wake from S4 [ 2.830260] rtc_cmos 00:02: registered as rtc0 [ 2.830401] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.830566] device-mapper: uevent: version 1.0.3 [ 2.830734] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.830885] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.831038] hid: raw HID events driver (C) Jiri Kosina [ 2.831343] usbcore: registered new interface driver usbhid [ 2.831448] usbhid: USB HID core driver [ 2.831950] Initializing XFRM netlink socket [ 2.832064] NET: Registered PF_INET6 protocol family [ 2.832676] Segment Routing with IPv6 [ 2.832791] In-situ OAM (IOAM) with IPv6 [ 2.832931] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.833221] NET: Registered PF_PACKET protocol family [ 2.833352] 9pnet: Installing 9P2000 support [ 2.833479] Key type dns_resolver registered [ 2.833592] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.834270] IPI shorthand broadcast: enabled [ 2.838650] sched_clock: Marking stable (2812003384, 26449720)->(2899676928, -61223824) [ 2.839211] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.839549] registered taskstats version 1 [ 2.839649] Loading compiled-in X.509 certificates [ 2.841676] PM: Magic number: 4:338:231 [ 2.841843] printk: legacy console [netcon0] enabled [ 2.843490] netconsole: network logging started [ 2.843700] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.853583] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.853953] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.854113] ALSA device list: [ 2.854208] No soundcards found. [ 2.855002] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.869508] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.869645] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.871096] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.871600] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.872659] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.873180] ata1.00: configured for UDMA/133 [ 2.873600] ata2.00: configured for UDMA/100 [ 2.873630] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.874526] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.874557] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.874864] sd 0:0:0:0: [sda] Write Protect is off [ 2.874972] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.875027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.875260] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.875519] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.902932] sda: sda1 sda2 < sda5 > [ 2.903290] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.913523] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.913687] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.920153] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.920303] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.922146] Freeing unused kernel image (initmem) memory: 2664K [ 2.922262] Write protecting the kernel read-only data: 22528k [ 2.931468] Freeing unused kernel image (rodata/data gap) memory: 100K [ 3.036115] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.036257] Run /init as init process [ 3.036363] with arguments: [ 3.036365] /init [ 3.036367] placeholder [ 3.036368] with environment: [ 3.036369] HOME=/ [ 3.036370] TERM=linux [ 3.088553] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 3.251391] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 3.251560] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.251671] usb 6-2: Product: Hermon USB hidmouse Device [ 3.251774] usb 6-2: Manufacturer: Winbond Electronics Corp [ 3.257836] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 3.258224] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 3.261793] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 3.282700] e1000e: Intel(R) PRO/1000 Network Driver [ 3.282843] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.283100] xen: registering gsi 48 triggering 0 polarity 1 [ 3.283149] xen: --> pirq=48 -> irq=48 (gsi=48) [ 3.283385] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.313854] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 3.327371] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 3.374381] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 3.374565] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.374754] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.374957] xen: registering gsi 47 triggering 0 polarity 1 [ 3.374983] xen: --> pirq=47 -> irq=47 (gsi=47) [ 3.375163] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.421486] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 3.471250] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 3.471398] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.471596] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.473339] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 3.474027] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.533506] random: crng init done [ 4.135776] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.140964] EXT4-fs (dm-0): mounted filesystem 1c46d41c-0638-41eb-9d9d-bc5b0021f692 ro with ordered data mode. Quota mode: none. [ 8.374125] EXT4-fs (dm-0): re-mounted 1c46d41c-0638-41eb-9d9d-bc5b0021f692 r/w. Quota mode: none. [ 9.742961] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.761858] EXT4-fs (sda1): mounted filesystem 8832a66e-ab7e-45ec-8508-647d50aa324c r/w with ordered data mode. Quota mode: none. [ 9.829204] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.361016] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 11.361192] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 11.361307] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 11.361488] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 14.585511] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.586107] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 14.586223] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state