[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 12:50:31 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000481] tsc: Detected 3092.974 MHz processor [ 0.000888] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000891] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000898] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000900] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000901] MTRRs set to read-only [ 0.000905] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000938] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024076] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.024084] ACPI: Early table checksum verification disabled [ 0.033599] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033609] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033642] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033682] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.033697] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.033712] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033728] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033743] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033759] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033774] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033790] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033805] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033821] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.033836] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.033851] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033867] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033882] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.033897] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033913] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033928] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033943] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033958] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033974] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033982] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.033983] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.033984] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.033985] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.033986] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.033987] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.033987] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.033988] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.033989] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.033990] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.033990] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.033991] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.033992] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.033993] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.033993] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.033994] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.033995] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.033996] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.033997] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.033997] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.033998] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034089] APIC: Switched APIC routing to: Xen PV [ 0.038702] Zone ranges: [ 0.038704] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.038706] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.038707] Normal empty [ 0.038708] Movable zone start for each node [ 0.038709] Early memory node ranges [ 0.038709] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.038710] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.038712] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.038717] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.038758] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040382] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040388] p2m virtual area at (____ptrval____), size is 40000000 [ 0.176327] Remapped 101 page(s) [ 0.176994] ACPI: PM-Timer IO Port: 0x408 [ 0.177149] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177193] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177219] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177223] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.177275] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.177280] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.177289] ACPI: SPCR: SPCR table version 1 [ 0.177291] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.177300] CPU topo: Max. logical packages: 1 [ 0.177301] CPU topo: Max. logical dies: 1 [ 0.177302] CPU topo: Max. dies per package: 1 [ 0.177307] CPU topo: Max. threads per core: 1 [ 0.177308] CPU topo: Num. cores per package: 4 [ 0.177308] CPU topo: Num. threads per package: 4 [ 0.177309] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.177324] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.177326] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.177327] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.177328] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.177332] Booting kernel on Xen [ 0.177333] Xen version: 4.19-unstable (preserve-AD) [ 0.177336] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.182725] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183163] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u524288 [ 0.183168] pcpu-alloc: s194344 r8192 d30936 u524288 alloc=1*2097152 [ 0.183171] pcpu-alloc: [0] 0 1 2 3 [ 0.183219] xen: PV spinlocks enabled [ 0.183222] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.183224] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.183260] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.183350] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183394] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184055] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.184059] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.184061] software IO TLB: area num 4. [ 0.246445] Memory: 388564K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135468K reserved, 0K cma-reserved) [ 0.246621] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.248747] Dynamic Preempt: voluntary [ 0.248914] rcu: Preemptible hierarchical RCU implementation. [ 0.248915] rcu: RCU event tracing is enabled. [ 0.248916] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.248918] Trampoline variant of Tasks RCU enabled. [ 0.248918] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.248919] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.248932] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.260848] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.261001] xen:events: Using FIFO-based ABI [ 0.261025] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.261034] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.261043] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.261051] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.261059] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.261067] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.261075] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.261083] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.261091] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.261100] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.261108] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.261116] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.261126] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.261134] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.261143] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.261152] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.266324] Console: colour VGA+ 80x25 [ 0.266327] printk: legacy console [tty0] enabled [ 0.282364] printk: legacy console [hvc0] enabled [ 0.283644] ACPI: Core revision 20230628 [ 0.288061] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.288217] Xen: using vcpuop timer interface [ 0.288223] installing Xen timer for CPU 0 [ 0.288373] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns [ 0.288529] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092974) [ 0.288832] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.288948] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.289073] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.289220] Spectre V2 : Mitigation: Retpolines [ 0.289332] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.289537] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.289656] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.289777] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.289924] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.290071] MDS: Mitigation: Clear CPU buffers [ 0.290534] MMIO Stale Data: Unknown: No mitigations [ 0.290667] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.290810] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.290926] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.291046] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.291164] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.308612] Freeing SMP alternatives memory: 40K [ 0.308737] pid_max: default: 32768 minimum: 301 [ 0.308868] LSM: initializing lsm=capability,selinux [ 0.308985] SELinux: Initializing. [ 0.309113] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.309257] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.309718] cpu 0 spinlock event irq 25 [ 0.309838] VPMU disabled by hypervisor. [ 0.310450] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.310535] signal: max sigframe size: 1776 [ 0.310721] rcu: Hierarchical SRCU implementation. [ 0.310836] rcu: Max phase no-delay instances is 400. [ 0.311402] smp: Bringing up secondary CPUs ... [ 0.311804] installing Xen timer for CPU 1 [ 0.312299] installing Xen timer for CPU 2 [ 0.312789] installing Xen timer for CPU 3 [ 0.028372] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0002 [ 0.313008] cpu 1 spinlock event irq 45 [ 0.028372] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0004 [ 0.313577] cpu 2 spinlock event irq 46 [ 0.028372] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0006 [ 0.313837] cpu 3 spinlock event irq 47 [ 0.314731] smp: Brought up 1 node, 4 CPUs [ 0.314969] devtmpfs: initialized [ 0.314969] x86/mm: Memory block size: 128MB [ 0.315809] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.318017] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.318225] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.318376] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.318639] PM: RTC time: 13:29:04, date: 2024-04-24 [ 0.318903] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.319044] xen:grant_table: Grant tables using version 1 layout [ 0.319180] Grant table initialized [ 0.319409] audit: initializing netlink subsys (disabled) [ 0.319575] audit: type=2000 audit(1713965344.886:1): state=initialized audit_enabled=0 res=1 [ 0.319611] thermal_sys: Registered thermal governor 'step_wise' [ 0.319611] thermal_sys: Registered thermal governor 'user_space' [ 0.319726] Simple Boot Flag at 0x4f set to 0x1 [ 0.319972] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.320587] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.320738] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.356757] PCI: Using configuration type 1 for base access [ 0.356928] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.356928] ACPI: Added _OSI(Module Device) [ 0.356928] ACPI: Added _OSI(Processor Device) [ 0.357535] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.357649] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364038] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.364764] xen: registering gsi 9 triggering 0 polarity 0 [ 0.364906] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.366974] ACPI: Dynamic OEM Table Load: [ 0.367095] ACPI: SSDT 0xFFFF88800352C000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.367822] ACPI: Dynamic OEM Table Load: [ 0.367939] ACPI: SSDT 0xFFFF888003597000 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.368524] ACPI: Dynamic OEM Table Load: [ 0.368646] ACPI: SSDT 0xFFFF888003565800 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.369571] ACPI: _OSC evaluated successfully for all CPUs [ 0.369827] ACPI: Interpreter enabled [ 0.369958] ACPI: PM: (supports S0 S1 S3 S5) [ 0.370072] ACPI: Using IOAPIC for interrupt routing [ 0.370212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.370360] PCI: Using E820 reservations for host bridge windows [ 0.370711] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.378851] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.381434] ACPI: \_TZ_.FN00: New power resource [ 0.381597] ACPI: \_TZ_.FN01: New power resource [ 0.381781] ACPI: \_TZ_.FN02: New power resource [ 0.381953] ACPI: \_TZ_.FN03: New power resource [ 0.382123] ACPI: \_TZ_.FN04: New power resource [ 0.382953] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.383107] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.383672] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.384339] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.384483] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.385027] PCI host bridge to bus 0000:00 [ 0.385141] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.385261] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.385380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.385523] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.385668] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.385811] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.385954] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.386110] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.386777] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.386993] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.387176] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.387331] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.387778] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.388117] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.388335] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.388862] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.389201] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.389500] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.389551] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.389682] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.389852] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.390272] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.390481] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.390539] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.390853] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.391156] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.391288] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.391417] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.391860] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.392064] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.392184] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.392504] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.392607] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.393130] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.393454] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.393679] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.393827] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.394280] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.395051] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.395271] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.395423] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.395573] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.395727] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.395881] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.396034] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.396387] pci 0000:00:1f.2: PME# supported from D3hot [ 0.396690] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.396931] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.397165] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.397651] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.398080] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.398318] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.398541] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.398707] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.399315] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.399852] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.400103] pci_bus 0000:03: extended config space not accessible [ 0.400279] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.400498] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.400803] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.401055] pci 0000:03:02.0: supports D1 D2 [ 0.401780] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.401946] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.402092] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.402239] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.402386] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.402533] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.402682] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.402914] pci_bus 0000:00: on NUMA node 0 [ 0.403077] xen: registering gsi 13 triggering 1 polarity 0 [ 0.403601] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.403789] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.403975] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.404094] ACPI: PCI: Interrupt link LNKC disabled [ 0.404275] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.404461] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.404602] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.404788] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.404973] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.405090] ACPI: PCI: Interrupt link LNKH disabled [ 0.405523] xen:balloon: Initialising balloon driver [ 0.405655] iommu: Default domain type: Translated [ 0.405709] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.405873] SCSI subsystem initialized [ 0.406000] libata version 3.00 loaded. [ 0.406000] ACPI: bus type USB registered [ 0.406000] usbcore: registered new interface driver usbfs [ 0.406541] usbcore: registered new interface driver hub [ 0.406662] usbcore: registered new device driver usb [ 0.406790] pps_core: LinuxPPS API ver. 1 registered [ 0.406905] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.407055] PTP clock support registered [ 0.407185] Advanced Linux Sound Architecture Driver Initialized. [ 0.407699] NetLabel: Initializing [ 0.407810] NetLabel: domain hash size = 128 [ 0.407923] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.408052] NetLabel: unlabeled traffic allowed by default [ 0.408192] PCI: Using ACPI for IRQ routing [ 0.418607] PCI: pci_cache_line_size set to 64 bytes [ 0.418749] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.418751] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.418773] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.418773] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.418793] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.418939] vgaarb: loaded [ 0.420389] clocksource: Switched to clocksource tsc-early [ 0.420510] VFS: Disk quotas dquot_6.6.0 [ 0.420510] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.420510] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.420510] pnp: PnP ACPI init [ 0.420510] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.420510] system 00:00: [io 0xffff] has been reserved [ 0.420571] system 00:00: [io 0xffff] has been reserved [ 0.420682] system 00:00: [io 0xffff] has been reserved [ 0.420682] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.420682] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.420682] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.420682] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.420682] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.420682] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.420682] xen: registering gsi 8 triggering 1 polarity 0 [ 0.421627] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.422029] xen: registering gsi 4 triggering 1 polarity 0 [ 0.422033] Already setup the GSI :4 [ 0.422527] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.422664] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.422782] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.422902] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.423020] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.423139] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.423258] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.423378] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.423497] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.423627] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.423749] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.424128] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.424298] pnp: PnP ACPI: found 6 devices [ 0.449655] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.449826] NET: Registered PF_INET protocol family [ 0.449974] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.450281] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.450431] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.450618] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.450797] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.450961] TCP: Hash tables configured (established 4096 bind 4096) [ 0.451097] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.451219] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.451364] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.451714] RPC: Registered named UNIX socket transport module. [ 0.451834] RPC: Registered udp transport module. [ 0.451947] RPC: Registered tcp transport module. [ 0.452061] RPC: Registered tcp-with-tls transport module. [ 0.452176] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.452621] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.452745] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.452881] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.453011] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.453177] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.453297] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.453432] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.453597] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.453728] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.453881] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.453998] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.454116] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.454236] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.454355] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.454475] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.454603] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.454718] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.454836] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.454978] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.455093] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.455211] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.455330] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.455447] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.455575] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.455695] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.455815] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.455935] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.456168] xen: registering gsi 22 triggering 0 polarity 1 [ 0.456192] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.477646] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21027 usecs [ 0.477869] xen: registering gsi 20 triggering 0 polarity 1 [ 0.477893] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.499645] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21310 usecs [ 0.499848] PCI: CLS 64 bytes, default 64 [ 0.499967] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.500085] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.500119] Unpacking initramfs... [ 0.500283] kvm_intel: VMX not supported by CPU 0 [ 0.500456] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.500584] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns [ 0.501036] clocksource: Switched to clocksource tsc [ 0.512187] Initialise system trusted keyrings [ 0.512490] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.512815] NFS: Registering the id_resolver key type [ 0.512940] Key type id_resolver registered [ 0.513051] Key type id_legacy registered [ 0.513216] 9p: Installing v9fs 9p2000 file system support [ 0.526354] Key type asymmetric registered [ 0.526492] Asymmetric key parser 'x509' registered [ 0.526635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.526790] io scheduler mq-deadline registered [ 0.526910] io scheduler kyber registered [ 0.527472] xen: registering gsi 16 triggering 0 polarity 1 [ 0.527503] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.527727] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.528090] xen: registering gsi 16 triggering 0 polarity 1 [ 0.528095] Already setup the GSI :16 [ 0.528405] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.528840] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.529039] ACPI: button: Sleep Button [SLPB] [ 0.529184] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.529399] ACPI: button: Power Button [PWRF] [ 0.529882] Monitor-Mwait will be used to enter C-1 state [ 0.529897] Monitor-Mwait will be used to enter C-3 state [ 0.529906] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.530234] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.530610] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.531108] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.531850] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.531970] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.532283] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.532418] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.532821] xen:xen_evtchn: Event-channel device installed [ 0.533029] xen_pciback: backend is vpci [ 0.533832] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.534702] hpet_acpi_add: no address or irqs in _CRS [ 0.534886] Non-volatile memory driver v1.3 [ 0.536597] loop: module loaded [ 0.541570] ahci 0000:00:1f.2: version 3.0 [ 0.541671] xen: registering gsi 21 triggering 0 polarity 1 [ 0.541703] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.552072] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.552230] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.552349] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.570091] scsi host0: ahci [ 0.570571] scsi host1: ahci [ 0.571060] scsi host2: ahci [ 0.571440] scsi host3: ahci [ 0.571768] scsi host4: ahci [ 0.572076] scsi host5: ahci [ 0.572220] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.572369] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.572536] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.572683] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.572830] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.572976] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.573324] tun: Universal TUN/TAP device driver, 1.6 [ 0.573547] e100: Intel(R) PRO/100 Network Driver [ 0.573663] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.573785] sky2: driver version 1.30 [ 0.573918] xen_netfront: Initialising Xen virtual ethernet driver [ 0.574235] usbcore: registered new interface driver usblp [ 0.574359] usbcore: registered new interface driver usb-storage [ 0.574399] xen: registering gsi 22 triggering 0 polarity 1 [ 0.574505] Already setup the GSI :22 [ 0.574532] i8042: PNP: No PS/2 controller found. [ 0.574705] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.574893] rtc_cmos 00:01: RTC can wake from S4 [ 0.574894] xen: registering gsi 20 triggering 0 polarity 1 [ 0.575010] Already setup the GSI :20 [ 0.575441] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.575462] rtc_cmos 00:01: registered as rtc0 [ 0.575618] ehci-pci 0000:00:1a.0: debug port 2 [ 0.575750] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.575971] device-mapper: uevent: version 1.0.3 [ 0.576094] xen: registering gsi 22 triggering 0 polarity 1 [ 0.576102] Already setup the GSI :22 [ 0.576153] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.576353] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.576399] intel_pstate: CPU model not supported [ 0.576660] hid: raw HID events driver (C) Jiri Kosina [ 0.576893] usbcore: registered new interface driver usbhid [ 0.577087] usbhid: USB HID core driver [ 0.577504] Initializing XFRM netlink socket [ 0.577665] NET: Registered PF_INET6 protocol family [ 0.578107] Segment Routing with IPv6 [ 0.578243] In-situ OAM (IOAM) with IPv6 [ 0.578423] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.578438] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.578672] NET: Registered PF_PACKET protocol family [ 0.578836] 9pnet: Installing 9P2000 support [ 0.578978] Key type dns_resolver registered [ 0.579780] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.580276] IPI shorthand broadcast: enabled [ 0.582572] sched_clock: Marking stable (555006122, 27372942)->(587561699, -5182635) [ 0.583019] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.583431] registered taskstats version 1 [ 0.583545] Loading compiled-in X.509 certificates [ 0.584764] PM: Magic number: 4:97:484 [ 0.584944] printk: legacy console [netcon0] enabled [ 0.585060] netconsole: network logging started [ 0.585389] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.586404] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.586648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.586797] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.586941] usb usb1: Product: EHCI Host Controller [ 0.587056] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.587174] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.587444] hub 1-0:1.0: USB hub found [ 0.587574] hub 1-0:1.0: 2 ports detected [ 0.587858] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.588105] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.588284] ehci-pci 0000:00:1d.0: debug port 2 [ 0.592499] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.593428] Freeing initrd memory: 20116K [ 0.599465] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.599716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 0.599871] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.600014] usb usb2: Product: EHCI Host Controller [ 0.600129] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 0.600247] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.600584] hub 2-0:1.0: USB hub found [ 0.600717] hub 2-0:1.0: 2 ports detected [ 0.604988] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.605297] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.605470] ALSA device list: [ 0.606029] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.606219] No soundcards found. [ 0.826486] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.842476] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.879177] ata2: SATA link down (SStatus 0 SControl 300) [ 0.879318] ata6: SATA link down (SStatus 0 SControl 300) [ 0.879469] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.879611] ata4: SATA link down (SStatus 0 SControl 300) [ 0.879749] ata5: SATA link down (SStatus 0 SControl 300) [ 0.879882] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.880910] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.881544] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.883003] ata1.00: configured for UDMA/133 [ 0.883295] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.883560] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.884442] ata3.00: configured for UDMA/100 [ 0.884445] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.884468] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.884856] sd 0:0:0:0: [sda] Write Protect is off [ 0.884971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.885006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.885266] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.886626] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.915292] sda: sda1 sda2 < sda5 > [ 0.915863] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 0.938244] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.938419] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.954900] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.955053] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.955564] hub 1-1:1.0: USB hub found [ 0.955950] hub 1-1:1.0: 6 ports detected [ 0.958559] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.958657] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.960444] Freeing unused kernel image (initmem) memory: 2664K [ 0.960568] Write protecting the kernel read-only data: 22528k [ 0.971828] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.971978] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.972355] hub 2-1:1.0: USB hub found [ 0.972576] hub 2-1:1.0: 6 ports detected [ 0.979093] Freeing unused kernel image (rodata/data gap) memory: 100K [ 1.150313] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.150446] Run /init as init process [ 1.150557] with arguments: [ 1.150558] /init [ 1.150559] placeholder [ 1.150559] with environment: [ 1.150560] HOME=/ [ 1.150561] TERM=linux [ 1.496091] e1000e: Intel(R) PRO/1000 Network Driver [ 1.496220] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.497019] xen: registering gsi 19 triggering 0 polarity 1 [ 1.497049] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.497455] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.612847] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.723593] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.723745] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.723898] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.724137] xen: registering gsi 16 triggering 0 polarity 1 [ 1.724144] Already setup the GSI :16 [ 1.724596] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.768354] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.817306] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.817467] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.817673] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.819806] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.820194] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.844403] random: crng init done [ 2.570270] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.575414] EXT4-fs (dm-0): mounted filesystem de7002da-a603-45b7-a7f8-5216b904b981 ro with ordered data mode. Quota mode: none. [ 5.909080] EXT4-fs (dm-0): re-mounted de7002da-a603-45b7-a7f8-5216b904b981 r/w. Quota mode: none. [ 7.629259] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.650611] EXT4-fs (sda1): mounted filesystem 31f50519-32f2-4592-aac3-6e467f93ec6b r/w with ordered data mode. Quota mode: none. [ 7.735116] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.572811] xenbr0: port 1(enx001e6796a416) entered blocking state [ 9.574605] xenbr0: port 1(enx001e6796a416) entered disabled state [ 9.574759] e1000e 0000:02:00.0 enx001e6796a416: entered allmulticast mode [ 9.574916] e1000e 0000:02:00.0 enx001e6796a416: entered promiscuous mode [ 11.991545] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.993059] xenbr0: port 1(enx001e6796a416) entered blocking state [ 11.993203] xenbr0: port 1(enx001e6796a416) entered forwarding state