[ 0.000000] Linux version 6.1.87+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 13:31:15 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2199.998 MHz processor [ 0.000899] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000903] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000911] Disabled [ 0.000912] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000916] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000955] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027689] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027698] ACPI: Early table checksum verification disabled [ 0.028298] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028310] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028347] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028395] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028411] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028427] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028443] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028459] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028475] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028491] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028507] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028523] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028539] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028555] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028576] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028592] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028608] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028624] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028640] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028656] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028674] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028690] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028698] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028700] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028701] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028702] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028703] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028704] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028705] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028706] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028707] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028708] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028709] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028710] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028711] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028712] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028713] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028714] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028715] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028716] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028717] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028718] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028763] Setting APIC routing to Xen PV. [ 0.032706] Zone ranges: [ 0.032708] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032710] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032712] Normal empty [ 0.032713] Movable zone start for each node [ 0.032714] Early memory node ranges [ 0.032714] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032716] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032718] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032723] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032760] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034306] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034311] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221789] Remapped 102 page(s) [ 0.223140] ACPI: PM-Timer IO Port: 0x408 [ 0.223194] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223197] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223199] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223200] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223201] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223203] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223204] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223206] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223234] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223247] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223251] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223277] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223281] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223351] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223366] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223368] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223369] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223371] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223376] Booting kernel on Xen [ 0.223376] Xen version: 4.19-unstable (preserve-AD) [ 0.223379] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229617] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229900] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229906] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229910] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229990] xen: PV spinlocks enabled [ 0.229994] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229999] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230001] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230038] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230062] random: crng init done [ 0.230111] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230135] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231455] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231458] software IO TLB: area num 8. [ 0.290961] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291129] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293612] Dynamic Preempt: voluntary [ 0.293712] rcu: Preemptible hierarchical RCU implementation. [ 0.293713] rcu: RCU event tracing is enabled. [ 0.293714] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293716] Trampoline variant of Tasks RCU enabled. [ 0.293717] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293718] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304268] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304392] xen:events: Using FIFO-based ABI [ 0.304417] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304425] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304433] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304440] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304447] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304454] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304461] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304468] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304476] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304483] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304490] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304497] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304505] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304512] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304519] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304530] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309899] Console: colour VGA+ 80x25 [ 0.324611] printk: console [tty0] enabled [ 0.325942] printk: console [hvc0] enabled [ 0.326081] ACPI: Core revision 20220331 [ 0.341573] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341739] Xen: using vcpuop timer interface [ 0.341747] installing Xen timer for CPU 0 [ 0.341897] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342055] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342383] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342499] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342626] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342774] Spectre V2 : Mitigation: Retpolines [ 0.343062] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343218] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343337] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343457] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343608] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343726] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343877] MDS: Mitigation: Clear CPU buffers [ 0.343989] TAA: Mitigation: Clear CPU buffers [ 0.344059] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344224] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344370] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344520] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344639] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344758] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362421] Freeing SMP alternatives memory: 40K [ 0.362546] pid_max: default: 32768 minimum: 301 [ 0.363077] LSM: Security Framework initializing [ 0.363198] SELinux: Initializing. [ 0.363337] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363488] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364147] cpu 0 spinlock event irq 25 [ 0.364266] VPMU disabled by hypervisor. [ 0.364699] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364845] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365001] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365060] signal: max sigframe size: 1776 [ 0.365222] rcu: Hierarchical SRCU implementation. [ 0.365351] rcu: Max phase no-delay instances is 400. [ 0.365836] smp: Bringing up secondary CPUs ... [ 0.366170] installing Xen timer for CPU 1 [ 0.366640] cpu 1 spinlock event irq 35 [ 0.367197] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367365] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367553] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368277] installing Xen timer for CPU 2 [ 0.368734] cpu 2 spinlock event irq 41 [ 0.369130] installing Xen timer for CPU 3 [ 0.369608] cpu 3 spinlock event irq 47 [ 0.369608] installing Xen timer for CPU 4 [ 0.370397] cpu 4 spinlock event irq 53 [ 0.370397] installing Xen timer for CPU 5 [ 0.371259] cpu 5 spinlock event irq 59 [ 0.371263] installing Xen timer for CPU 6 [ 0.372106] cpu 6 spinlock event irq 65 [ 0.372317] installing Xen timer for CPU 7 [ 0.372771] cpu 7 spinlock event irq 71 [ 0.373294] smp: Brought up 1 node, 8 CPUs [ 0.373439] smpboot: Max logical packages: 1 [ 0.373657] devtmpfs: initialized [ 0.373657] x86/mm: Memory block size: 128MB [ 0.374400] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374400] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374513] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375166] PM: RTC time: 15:01:40, date: 2024-04-24 [ 0.375420] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375566] xen:grant_table: Grant tables using version 1 layout [ 0.375703] Grant table initialized [ 0.376014] audit: initializing netlink subsys (disabled) [ 0.376103] audit: type=2000 audit(1713970901.183:1): state=initialized audit_enabled=0 res=1 [ 0.376143] thermal_sys: Registered thermal governor 'step_wise' [ 0.376143] thermal_sys: Registered thermal governor 'user_space' [ 0.376276] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377108] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377263] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505999] PCI: Using configuration type 1 for base access [ 0.508593] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509118] ACPI: Added _OSI(Module Device) [ 0.509228] ACPI: Added _OSI(Processor Device) [ 0.509341] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509455] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539389] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541378] xen: registering gsi 9 triggering 0 polarity 0 [ 0.543961] ACPI: Dynamic OEM Table Load: [ 0.553311] ACPI: Interpreter enabled [ 0.553444] ACPI: PM: (supports S0 S4 S5) [ 0.553556] ACPI: Using IOAPIC for interrupt routing [ 0.553701] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553851] PCI: Using E820 reservations for host bridge windows [ 0.554507] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.589837] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.589967] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.590147] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.590412] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.590532] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.590706] PCI host bridge to bus 0000:ff [ 0.590818] pci_bus 0000:ff: root bus resource [bus ff] [ 0.591017] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.591382] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.591803] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.592224] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.592657] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.593076] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.593493] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.593917] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.594361] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.594791] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.595211] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.595627] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.596046] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.596466] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596895] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.597312] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597728] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.598151] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.598402] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598854] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.599328] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599787] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.600251] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.600713] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.601175] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.601626] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.602043] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.602366] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.602826] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.603290] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.603751] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.604207] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.604628] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.605046] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.605467] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.605894] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.605894] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605894] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606053] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.606053] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607206] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.607640] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.608058] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608306] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.608737] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609161] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.609581] pci_bus 0000:ff: on NUMA node 0 [ 0.613855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613982] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.614184] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.614522] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614642] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.615125] PCI host bridge to bus 0000:00 [ 0.615238] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.615359] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.615479] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615623] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615770] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615970] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.616569] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.617085] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.617455] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.617973] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.618326] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.618838] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.619193] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.619701] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.620077] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.620594] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.620958] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.621451] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.621819] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.622388] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.623007] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623597] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.623812] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.624277] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.624617] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.624833] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.625292] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.625594] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.625810] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.626267] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.626623] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.626829] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.627358] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.627675] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.628219] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628417] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628539] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.636229] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.636776] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.636970] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.637066] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.637358] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.637911] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.638107] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.638228] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.638511] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.639064] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.639257] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.639378] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.639699] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.639895] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.640429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.640747] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.641496] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.641695] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.641853] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.642012] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.642099] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.642255] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.642412] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.642720] pci 0000:00:1f.2: PME# supported from D3hot [ 0.643007] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.643154] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.643397] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.643772] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.643989] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.644645] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.644937] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.645267] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.645478] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.646222] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.646433] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.647098] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.647310] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.648007] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.648150] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.648837] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.648971] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.649274] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.649485] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.649768] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.649951] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.650285] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.650504] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.650625] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.650828] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.650949] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.651475] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.651687] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.651970] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.652098] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.652455] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.652656] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.652776] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.652979] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.653058] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.653609] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.653743] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.653880] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.654161] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.654450] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.654814] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.654933] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.655138] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.655353] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.655518] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.656042] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.656406] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.656532] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.656663] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.657013] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.657058] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.657264] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.657484] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.657648] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.658174] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.658630] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.658762] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.658890] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.659226] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.659616] pci 0000:09:00.0: enabling Extended Tags [ 0.659952] pci 0000:09:00.0: supports D1 D2 [ 0.660058] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.660416] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.660542] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.660670] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.660968] pci_bus 0000:0a: extended config space not accessible [ 0.661109] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.661313] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.661483] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.661651] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.662001] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.662198] pci 0000:0a:00.0: supports D1 D2 [ 0.662311] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662745] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.662895] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.663024] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.663321] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.663520] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.663727] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.663888] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.664399] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.664632] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.664777] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.664994] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665058] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.665618] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.665817] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.666025] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.666103] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.666610] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.666854] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666998] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.667121] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667265] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667782] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.667986] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.668147] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.668307] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.668812] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.669038] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669058] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669278] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669422] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669940] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.670138] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.670346] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.670511] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.671016] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.671166] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671310] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671527] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671671] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672259] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.672384] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.672512] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.672651] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.673113] pci_bus 0000:00: on NUMA node 0 [ 0.673208] xen: registering gsi 13 triggering 1 polarity 0 [ 0.674167] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.674360] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.674549] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.674735] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.674922] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.675040] ACPI: PCI: Interrupt link LNKE disabled [ 0.675129] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.675247] ACPI: PCI: Interrupt link LNKF disabled [ 0.675429] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.675552] ACPI: PCI: Interrupt link LNKG disabled [ 0.675735] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.675860] ACPI: PCI: Interrupt link LNKH disabled [ 0.676121] xen:balloon: Initialising balloon driver [ 0.677157] iommu: Default domain type: Translated [ 0.684061] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.684248] SCSI subsystem initialized [ 0.684375] libata version 3.00 loaded. [ 0.684375] ACPI: bus type USB registered [ 0.684375] usbcore: registered new interface driver usbfs [ 0.684375] usbcore: registered new interface driver hub [ 0.684477] usbcore: registered new device driver usb [ 0.684603] pps_core: LinuxPPS API ver. 1 registered [ 0.685059] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.685216] PTP clock support registered [ 0.686109] Advanced Linux Sound Architecture Driver Initialized. [ 0.686364] NetLabel: Initializing [ 0.686475] NetLabel: domain hash size = 128 [ 0.686587] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.686587] NetLabel: unlabeled traffic allowed by default [ 0.686587] PCI: Using ACPI for IRQ routing [ 0.720986] PCI: pci_cache_line_size set to 64 bytes [ 0.721752] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.721755] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.721777] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.721777] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.721777] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.722059] vgaarb: loaded [ 0.724056] clocksource: Switched to clocksource tsc-early [ 0.724310] VFS: Disk quotas dquot_6.6.0 [ 0.724434] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.724580] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.724737] pnp: PnP ACPI init [ 0.725221] xen: registering gsi 8 triggering 1 polarity 0 [ 0.725418] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.725544] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.725663] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.725781] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.725899] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.726016] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.726160] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.726283] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.726403] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.726523] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.726642] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.726762] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.726889] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.727311] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.727433] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.727551] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.727669] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.727787] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.728232] xen: registering gsi 4 triggering 1 polarity 0 [ 0.728238] Already setup the GSI :4 [ 0.728350] pnp 00:03: [dma 0 disabled] [ 0.728661] xen: registering gsi 3 triggering 1 polarity 0 [ 0.728673] pnp 00:04: [dma 0 disabled] [ 0.729278] pnp: PnP ACPI: found 5 devices [ 0.758748] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.758941] NET: Registered PF_INET protocol family [ 0.759129] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.759507] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.759658] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.759804] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.759955] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.760152] TCP: Hash tables configured (established 4096 bind 4096) [ 0.760317] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760464] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.760617] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.761011] RPC: Registered named UNIX socket transport module. [ 0.761154] RPC: Registered udp transport module. [ 0.761268] RPC: Registered tcp transport module. [ 0.761381] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.761935] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.762132] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.762296] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.762458] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.762605] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.762779] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.762958] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.763101] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.763262] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763384] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763529] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763672] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763817] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763939] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.764090] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764257] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764406] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.764528] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.764672] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.764815] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.764960] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.765096] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.765256] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.765402] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.765547] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.765687] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.765819] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.765990] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.766191] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.766367] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.766486] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.766625] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.766785] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.766903] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.767048] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.767226] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.767345] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.767486] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.767650] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.767770] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.767908] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.768079] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.768251] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.768413] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.768566] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.768718] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.768870] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.769022] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.769200] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.769356] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.769475] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.769613] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.769746] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.769924] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.770084] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.770206] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.770324] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.770445] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.770565] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.770684] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.770802] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770946] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.771069] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.771203] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.771321] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.771440] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.771555] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771674] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.771790] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.771908] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.772024] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.772168] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.772705] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.772924] xen: registering gsi 19 triggering 0 polarity 1 [ 0.772952] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.781803] xen: registering gsi 18 triggering 0 polarity 1 [ 0.781825] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.798287] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16149 usecs [ 0.798532] xen: registering gsi 18 triggering 0 polarity 1 [ 0.798538] Already setup the GSI :18 [ 0.815428] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16553 usecs [ 0.815639] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.815780] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.815855] Unpacking initramfs... [ 0.815899] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.816262] kvm: no hardware support for 'kvm_intel' [ 0.824102] has_svm: not amd or hygon [ 0.824231] kvm: no hardware support for 'kvm_amd' [ 0.824352] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.824597] clocksource: Switched to clocksource tsc [ 0.827478] Initialise system trusted keyrings [ 0.827743] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.829232] NFS: Registering the id_resolver key type [ 0.829358] Key type id_resolver registered [ 0.829470] Key type id_legacy registered [ 0.829670] 9p: Installing v9fs 9p2000 file system support [ 0.843691] Key type asymmetric registered [ 0.843821] Asymmetric key parser 'x509' registered [ 0.843958] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.844112] io scheduler mq-deadline registered [ 0.844225] io scheduler kyber registered [ 0.845095] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845128] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.845713] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845720] Already setup the GSI :16 [ 0.846319] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846324] Already setup the GSI :16 [ 0.846669] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846673] Already setup the GSI :16 [ 0.846989] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846993] Already setup the GSI :16 [ 0.847584] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847588] Already setup the GSI :16 [ 0.848155] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848159] Already setup the GSI :16 [ 0.848605] xen: registering gsi 17 triggering 0 polarity 1 [ 0.848623] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.848958] xen: registering gsi 19 triggering 0 polarity 1 [ 0.848962] Already setup the GSI :19 [ 0.849400] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849404] Already setup the GSI :16 [ 0.850094] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.850268] ACPI: button: Power Button [PWRB] [ 0.850410] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.850685] ACPI: button: Power Button [PWRF] [ 0.851018] Monitor-Mwait will be used to enter C-1 state [ 0.851057] Monitor-Mwait will be used to enter C-2 state [ 0.851074] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.851457] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.851778] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.852286] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.852768] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.853431] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.853843] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.854344] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.855229] xen:xen_evtchn: Event-channel device installed [ 0.855425] xen_pciback: backend is vpci [ 0.856136] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.856447] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.857141] hpet_acpi_add: no address or irqs in _CRS [ 0.857372] Non-volatile memory driver v1.3 [ 0.857486] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.860032] loop: module loaded [ 0.866466] ahci 0000:00:1f.2: version 3.0 [ 0.866606] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866616] Already setup the GSI :16 [ 0.866941] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.867092] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.882213] scsi host0: ahci [ 0.882640] scsi host1: ahci [ 0.882952] scsi host2: ahci [ 0.883257] scsi host3: ahci [ 0.883591] scsi host4: ahci [ 0.883965] scsi host5: ahci [ 0.884138] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.884284] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.884428] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.884588] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.884733] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.884877] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.885312] tun: Universal TUN/TAP device driver, 1.6 [ 0.885577] e100: Intel(R) PRO/100 Network Driver [ 0.885711] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.885869] sky2: driver version 1.30 [ 0.886057] xen_netfront: Initialising Xen virtual ethernet driver [ 0.886441] xen: registering gsi 18 triggering 0 polarity 1 [ 0.886450] Already setup the GSI :18 [ 0.886672] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.886873] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.887049] ehci-pci 0000:00:1a.0: debug port 2 [ 0.891195] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.897593] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.897874] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.898023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.898167] usb usb1: Product: EHCI Host Controller [ 0.898283] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.898398] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.898708] hub 1-0:1.0: USB hub found [ 0.898833] hub 1-0:1.0: 2 ports detected [ 0.899201] xen: registering gsi 18 triggering 0 polarity 1 [ 0.899210] Already setup the GSI :18 [ 0.899433] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.899630] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.899805] ehci-pci 0000:00:1d.0: debug port 2 [ 0.903909] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.910595] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.910844] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.910993] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.911137] usb usb2: Product: EHCI Host Controller [ 0.911252] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.911367] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.911687] hub 2-0:1.0: USB hub found [ 0.911819] hub 2-0:1.0: 2 ports detected [ 0.912262] xen: registering gsi 19 triggering 0 polarity 1 [ 0.912271] Already setup the GSI :19 [ 0.912480] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.912687] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.913902] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.914372] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.914630] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.914785] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.914992] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.915140] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915283] usb usb3: Product: xHCI Host Controller [ 0.915397] usb usb3: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.915513] usb usb3: SerialNumber: 0000:00:14.0 [ 0.915820] hub 3-0:1.0: USB hub found [ 0.915959] hub 3-0:1.0: 8 ports detected [ 0.917073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.917224] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.917372] usb usb4: Product: xHCI Host Controller [ 0.917486] usb usb4: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.917616] usb usb4: SerialNumber: 0000:00:14.0 [ 0.917871] hub 4-0:1.0: USB hub found [ 0.918002] hub 4-0:1.0: 6 ports detected [ 0.919118] usbcore: registered new interface driver usblp [ 0.919254] usbcore: registered new interface driver usb-storage [ 0.919398] i8042: PNP: No PS/2 controller found. [ 0.919724] rtc_cmos 00:00: RTC can wake from S4 [ 0.920382] rtc_cmos 00:00: registered as rtc0 [ 0.920558] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.920852] device-mapper: uevent: version 1.0.3 [ 0.921096] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.921197] xen: registering gsi 18 triggering 0 polarity 1 [ 0.921256] intel_pstate: CPU model not supported [ 0.921261] Already setup the GSI :18 [ 0.921278] hid: raw HID events driver (C) Jiri Kosina [ 0.921412] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.921665] usbcore: registered new interface driver usbhid [ 0.921775] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.921862] usbhid: USB HID core driver [ 0.922335] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.922558] Freeing initrd memory: 19884K [ 0.922770] Initializing XFRM netlink socket [ 0.923035] NET: Registered PF_INET6 protocol family [ 0.923593] Segment Routing with IPv6 [ 0.923711] In-situ OAM (IOAM) with IPv6 [ 0.923851] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.924088] NET: Registered PF_PACKET protocol family [ 0.924242] 9pnet: Installing 9P2000 support [ 0.924368] Key type dns_resolver registered [ 0.925051] IPI shorthand broadcast: enabled [ 0.925189] sched_clock: Marking stable (887489819, 37521140)->(1773234071, -848223112) [ 0.925797] registered taskstats version 1 [ 0.925913] Loading compiled-in X.509 certificates [ 0.928498] PM: Magic number: 4:344:33 [ 0.928761] printk: console [netcon0] enabled [ 0.928877] netconsole: network logging started [ 0.929222] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.941436] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.941794] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.942451] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.942638] ALSA device list: [ 0.942759] No soundcards found. [ 1.135662] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151626] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159580] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196332] ata4: SATA link down (SStatus 0 SControl 300) [ 1.196519] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.196671] ata6: SATA link down (SStatus 0 SControl 300) [ 1.196826] ata5: SATA link down (SStatus 0 SControl 300) [ 1.196965] ata2: SATA link down (SStatus 0 SControl 300) [ 1.197118] ata1: SATA link down (SStatus 0 SControl 300) [ 1.197745] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272023] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272176] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272527] hub 1-1:1.0: USB hub found [ 1.272750] hub 1-1:1.0: 4 ports detected [ 1.280003] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280527] hub 2-1:1.0: USB hub found [ 1.280754] hub 2-1:1.0: 4 ports detected [ 1.286430] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.286658] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.287263] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287418] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287566] usb 3-3: Product: USB2.0 Hub [ 1.288365] hub 3-3:1.0: USB hub found [ 1.288866] hub 3-3:1.0: 4 ports detected [ 1.314461] ata3.00: configured for UDMA/133 [ 1.314748] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.315330] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.315391] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.315654] sd 2:0:0:0: [sda] Write Protect is off [ 1.315777] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.315838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.316067] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.335460] sda: sda1 sda2 < sda5 > [ 1.335826] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.337012] Freeing unused kernel image (initmem) memory: 1580K [ 1.337139] Write protecting the kernel read-only data: 22528k [ 1.354859] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.356107] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.814860] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.815035] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.815053] Run /init as init process [ 1.815278] with arguments: [ 1.815279] /init [ 1.815280] placeholder [ 1.815281] with environment: [ 1.815282] HOME=/ [ 1.815283] TERM=linux [ 1.941897] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.942083] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.942905] hub 3-4:1.0: USB hub found [ 1.943141] hub 3-4:1.0: 4 ports detected [ 2.006584] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 2.084991] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.085149] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.085294] usb 3-3.2: Product: USB2.0 Hub [ 2.086106] hub 3-3.2:1.0: USB hub found [ 2.086616] hub 3-3.2:1.0: 4 ports detected [ 2.233561] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 2.240671] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.240831] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.241320] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.241679] xen: registering gsi 16 triggering 0 polarity 1 [ 2.241692] Already setup the GSI :16 [ 2.245534] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.245657] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.245887] xen: registering gsi 16 triggering 0 polarity 1 [ 2.245894] Already setup the GSI :16 [ 2.272769] pps pps0: new PPS source ptp0 [ 2.272955] igb 0000:07:00.0: added PHC on eth0 [ 2.273088] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.273209] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.273374] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.273496] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.273758] xen: registering gsi 17 triggering 0 polarity 1 [ 2.273766] Already setup the GSI :17 [ 2.303225] pps pps1: new PPS source ptp1 [ 2.303420] igb 0000:08:00.0: added PHC on eth1 [ 2.303574] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.303695] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.303860] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.303983] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.304214] xen: registering gsi 16 triggering 0 polarity 1 [ 2.304221] Already setup the GSI :16 [ 2.338030] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 2.338186] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.344066] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.361774] igb 0000:0b:00.0: added PHC on eth2 [ 2.361910] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.362031] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.362266] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.362381] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.362621] xen: registering gsi 17 triggering 0 polarity 1 [ 2.362629] Already setup the GSI :17 [ 2.395803] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.398902] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.399226] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.420443] igb 0000:0b:00.1: added PHC on eth3 [ 2.420593] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.420714] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.420918] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.421033] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.421271] xen: registering gsi 18 triggering 0 polarity 1 [ 2.421280] Already setup the GSI :18 [ 2.477678] igb 0000:0b:00.2: added PHC on eth4 [ 2.477819] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.477940] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.478143] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.478259] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.478498] xen: registering gsi 19 triggering 0 polarity 1 [ 2.478507] Already setup the GSI :19 [ 2.536625] igb 0000:0b:00.3: added PHC on eth5 [ 2.536766] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.536894] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.537102] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.537217] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.539496] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.549132] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.558797] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.571841] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.581789] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.595143] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.980944] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.110503] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.110653] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.403636] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.404018] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.404238] xen: registering gsi 17 triggering 0 polarity 1 [ 3.404249] Already setup the GSI :17 [ 4.144708] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.274336] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.274496] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.563402] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.565864] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.578107] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.984794] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.992996] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.580013] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.698050] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.722312] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.817436] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.375570] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.375752] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.375928] device enx0cc47a9f87be entered promiscuous mode [ 14.868170] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.077811] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.078033] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.078156] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.078426] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready