[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-20-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.936 MHz processor [ 0.000894] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001050] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001697] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001706] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018729] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018754] Using GB pages for direct mapping [ 0.019119] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019127] ACPI: Early table checksum verification disabled [ 0.019131] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019137] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019146] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019154] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019160] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019164] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019169] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019174] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019179] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019184] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019189] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019195] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019200] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019205] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019210] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019215] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019220] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019224] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019226] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019228] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019229] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019231] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019232] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019234] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019235] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019236] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019238] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019239] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019240] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019242] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019243] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019244] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019313] No NUMA configuration found [ 0.019315] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019331] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019865] Zone ranges: [ 0.019866] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019869] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019872] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019874] Device empty [ 0.019876] Movable zone start for each node [ 0.019880] Early memory node ranges [ 0.019881] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019883] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019885] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019889] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019896] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019952] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028075] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028370] ACPI: PM-Timer IO Port: 0x408 [ 0.028383] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028385] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028387] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028388] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028400] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028406] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028410] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028413] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028420] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028422] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028428] TSC deadline timer available [ 0.028430] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028452] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028455] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028456] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028458] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028459] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028461] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028462] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028464] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028465] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028466] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028467] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028469] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028470] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028471] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028472] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028474] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028476] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028478] Booting paravirtualized kernel on bare hardware [ 0.028482] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035835] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036231] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036240] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036244] pcpu-alloc: [0] 0 1 2 3 [ 0.036285] Fallback order for Node 0: 0 [ 0.036290] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036292] Policy zone: Normal [ 0.036294] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036363] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64", will be passed to user space. [ 0.036393] random: crng init done [ 0.037445] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038017] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038105] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038118] software IO TLB: area num 4. [ 0.079346] Memory: 2033856K/8353556K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2800K init, 17404K bss, 304412K reserved, 0K cma-reserved) [ 0.079561] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079583] Kernel/User page tables isolation: enabled [ 0.079636] ftrace: allocating 40211 entries in 158 pages [ 0.090007] ftrace: allocated 158 pages with 5 groups [ 0.090952] Dynamic Preempt: voluntary [ 0.090995] rcu: Preemptible hierarchical RCU implementation. [ 0.090996] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090998] Trampoline variant of Tasks RCU enabled. [ 0.090999] Rude variant of Tasks RCU enabled. [ 0.091000] Tracing variant of Tasks RCU enabled. [ 0.091001] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091002] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098377] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098576] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103104] Console: colour VGA+ 80x25 [ 1.027510] printk: console [ttyS0] enabled [ 1.031718] ACPI: Core revision 20220331 [ 1.036367] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045506] APIC: Switch to symmetric I/O mode setup [ 1.050487] DMAR: Host address width 46 [ 1.054336] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059663] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067586] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073852] DMAR: ATSR flags: 0x0 [ 1.077163] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083432] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089792] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096153] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101560] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110686] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116087] x2apic enabled [ 1.118808] Switched APIC routing to cluster x2apic. [ 1.124323] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149510] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f1ed2d0db, max_idle_ns: 440795275845 ns [ 1.160027] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.87 BogoMIPS (lpj=7199744) [ 1.164057] CPU0: Thermal monitoring enabled (TM1) [ 1.168109] process: using mwait in idle threads [ 1.172027] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176024] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180027] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184026] Spectre V2 : Mitigation: Retpolines [ 1.188024] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192024] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196024] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200026] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204025] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208025] MDS: Mitigation: Clear CPU buffers [ 1.212024] MMIO Stale Data: Unknown: No mitigations [ 1.216030] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220024] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224024] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228025] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232024] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260586] Freeing SMP alternatives memory: 36K [ 1.264025] pid_max: default: 32768 minimum: 301 [ 1.268058] LSM: Security Framework initializing [ 1.272043] landlock: Up and running. [ 1.276024] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280057] AppArmor: AppArmor initialized [ 1.284026] TOMOYO Linux initialized [ 1.288031] LSM support for eBPF active [ 1.292071] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296040] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.304571] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308215] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312025] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316056] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320025] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324047] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328025] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332046] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336026] ... version: 3 [ 1.340024] ... bit width: 48 [ 1.344024] ... generic registers: 8 [ 1.348024] ... value mask: 0000ffffffffffff [ 1.352024] ... max period: 00007fffffffffff [ 1.356024] ... fixed-purpose events: 3 [ 1.360024] ... event mask: 00000007000000ff [ 1.364258] signal: max sigframe size: 1776 [ 1.368049] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372057] rcu: Hierarchical SRCU implementation. [ 1.376025] rcu: Max phase no-delay instances is 1000. [ 1.380699] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384121] smp: Bringing up secondary CPUs ... [ 1.388172] x86: Booting SMP configuration: [ 1.392030] .... node #0, CPUs: #1 #2 #3 [ 1.407240] smp: Brought up 1 node, 4 CPUs [ 1.412025] smpboot: Max logical packages: 1 [ 1.416025] smpboot: Total of 4 processors activated (14399.48 BogoMIPS) [ 1.441176] node 0 deferred pages initialised in 20ms [ 1.444468] devtmpfs: initialized [ 1.448105] x86/mm: Memory block size: 128MB [ 1.453076] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456076] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464037] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468087] pinctrl core: initialized pinctrl subsystem [ 1.472909] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476308] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480185] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484185] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488035] audit: initializing netlink subsys (disabled) [ 1.492040] audit: type=2000 audit(1714019737.404:1): state=initialized audit_enabled=0 res=1 [ 1.492177] thermal_sys: Registered thermal governor 'fair_share' [ 1.496028] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500025] thermal_sys: Registered thermal governor 'step_wise' [ 1.504024] thermal_sys: Registered thermal governor 'user_space' [ 1.508024] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512042] cpuidle: using governor ladder [ 1.520029] cpuidle: using governor menu [ 1.524000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524026] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528128] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532027] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536034] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.540484] PCI: Using configuration type 1 for base access [ 1.544123] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.549360] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552089] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556027] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564025] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572024] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.578726] ACPI: Added _OSI(Module Device) [ 1.580028] ACPI: Added _OSI(Processor Device) [ 1.584025] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592026] ACPI: Added _OSI(Processor Aggregator Device) [ 1.720421] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.749622] ACPI: Interpreter enabled [ 1.752047] ACPI: PM: (supports S0 S1 S4 S5) [ 1.756025] ACPI: Using IOAPIC for interrupt routing [ 1.764132] HEST: Table parsing has been initialized. [ 1.768151] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.772029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.784025] PCI: Using E820 reservations for host bridge windows [ 1.788573] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.796135] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.800028] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.804033] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.804134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.808023] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.820122] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.828185] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.836025] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.844390] PCI host bridge to bus 0000:00 [ 1.848027] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.856025] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.864025] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.868025] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.876025] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.884025] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.892025] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.900025] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.908025] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.912055] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.916108] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.924149] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.932124] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.936192] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.944123] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.948192] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.956063] pci 0000:00:03.0: enabling Extended Tags [ 1.960089] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.968178] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.972042] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.980171] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.984041] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.992160] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 2.000041] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 2.004159] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.012041] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.016161] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.024041] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.032159] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.036041] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.044161] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.048044] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.056160] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.064041] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.068158] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.076154] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.080148] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.088036] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.096174] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.100145] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.108167] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.112043] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.120093] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.124114] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.132043] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.140093] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.144127] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.152041] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.156115] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.164130] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.168124] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.176054] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.180026] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.188129] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.192124] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.200055] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.204026] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.212147] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.216041] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.224116] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.228130] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.236171] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.240241] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.248038] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.252031] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.260031] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.264031] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.272031] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.276031] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.280069] pci 0000:00:1f.2: PME# supported from D3hot [ 2.288115] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.292042] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.300048] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.304100] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.312045] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.320187] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.324076] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.328075] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.332109] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.340048] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.348039] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.356034] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.360051] pci 0000:04:00.0: enabling Extended Tags [ 2.364131] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.372025] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.384280] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.388028] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.392033] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.400122] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.408060] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.412062] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.420043] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.424213] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.432246] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.436028] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.444027] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.452125] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.456060] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.464062] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.468043] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.476209] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.480238] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.484028] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.492027] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.500047] pci_bus 0000:07: extended config space not accessible [ 2.504050] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.512041] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.516033] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.524033] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.532071] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.540136] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.544029] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.552031] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.560025] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.568025] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.576025] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.584025] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.596025] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.604025] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.612025] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.620025] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.632824] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.636029] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.648044] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.656025] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.664093] PCI host bridge to bus 0000:ff [ 2.668026] pci_bus 0000:ff: root bus resource [bus ff] [ 2.672038] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.680104] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.684094] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.692085] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.696084] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.704086] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.708091] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.716082] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.724083] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.728083] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.736086] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.740082] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.748085] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.752088] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.760101] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.764113] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.772107] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.776107] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.784106] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.788106] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.796109] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.800112] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.808115] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.812108] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.820107] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.824107] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.832109] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.836108] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.844106] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.848084] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.856089] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.860085] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.868087] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.876084] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.880082] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.888245] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.892079] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.900077] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.904076] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.912095] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.916077] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.924077] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.928077] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.937710] iommu: Default domain type: Translated [ 2.940025] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.948123] pps_core: LinuxPPS API ver. 1 registered [ 2.952025] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.960028] PTP clock support registered [ 2.963963] EDAC MC: Ver: 3.0.0 [ 2.968288] NetLabel: Initializing [ 2.971691] NetLabel: domain hash size = 128 [ 2.976027] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.984047] NetLabel: unlabeled traffic allowed by default [ 2.988025] PCI: Using ACPI for IRQ routing [ 2.998985] PCI: pci_cache_line_size set to 64 bytes [ 2.999110] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.999113] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 3.000062] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 3.004023] pci 0000:07:01.0: vgaarb: bridge control possible [ 3.004023] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.020032] vgaarb: loaded [ 3.024561] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.032025] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.038086] clocksource: Switched to clocksource tsc-early [ 3.041730] VFS: Disk quotas dquot_6.6.0 [ 3.045672] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.052735] AppArmor: AppArmor Filesystem Enabled [ 3.057466] pnp: PnP ACPI init [ 3.060673] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.067290] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.073908] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.080519] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.087265] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.094366] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.100292] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.107573] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.113699] pnp 00:07: [dma 0 disabled] [ 3.113942] pnp 00:08: [dma 0 disabled] [ 3.114227] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.120147] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.126063] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.131983] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.137905] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.144516] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.151478] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.158199] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.164405] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.171656] pnp: PnP ACPI: found 12 devices [ 3.182372] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.191340] NET: Registered PF_INET protocol family [ 3.196409] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.206748] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.215320] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.223143] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.231444] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.239242] TCP: Hash tables configured (established 65536 bind 65536) [ 3.245871] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.253429] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.260261] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.267553] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.273222] NET: Registered PF_XDP protocol family [ 3.278034] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.283014] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.287988] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.292965] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.297931] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.304028] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.311778] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.316750] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.322841] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.329631] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.334601] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.340694] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.347485] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.352455] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.359240] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.366983] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.373167] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.379346] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.385526] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.391706] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.398577] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.405451] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.412409] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.419370] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.424942] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.432163] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.437737] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.444002] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.449575] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.455842] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.462105] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.469327] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.475506] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.481684] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.487865] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.494043] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.500917] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.507789] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.514749] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.521804] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.549531] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20175 usecs [ 3.577517] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 20088 usecs [ 3.585029] PCI: CLS 64 bytes, default 64 [ 3.589077] DMAR: No SATC found [ 3.589111] Trying to unpack rootfs image as initramfs... [ 3.592226] DMAR: dmar0: Using Queued invalidation [ 3.592304] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607533] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612614] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617701] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622785] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627863] pci 0000:00:04.1: Adding to iommu group 5 [ 3.632945] pci 0000:00:04.2: Adding to iommu group 6 [ 3.638025] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643109] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648188] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653269] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658438] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663605] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668773] pci 0000:00:05.2: Adding to iommu group 13 [ 3.673940] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679111] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684300] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689468] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694642] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699815] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.704987] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710157] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715326] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720539] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725704] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730871] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.736035] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741212] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746378] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751540] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756689] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761874] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767050] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772263] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777433] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782604] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787777] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.792970] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798141] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803334] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808502] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813696] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818869] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824062] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829236] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834408] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839577] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844744] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.849913] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855075] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860243] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865411] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870584] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875760] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880933] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886104] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891272] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896443] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901609] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906817] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.911992] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917164] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922339] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927542] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932713] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.937888] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.946930] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953381] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959823] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968322] Initialise system trusted keyrings [ 3.972788] Key type blacklist registered [ 3.976882] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985190] zbud: loaded [ 3.988051] integrity: Platform Keyring initialized [ 3.992943] integrity: Machine keyring initialized [ 3.997737] Key type asymmetric registered [ 4.001841] Asymmetric key parser 'x509' registered [ 4.033519] Freeing initrd memory: 39592K [ 4.044815] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.050606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.058046] io scheduler mq-deadline registered [ 4.065016] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.071832] Monitor-Mwait will be used to enter C-1 state [ 4.071846] Monitor-Mwait will be used to enter C-2 state [ 4.071853] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.082032] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.089522] pstore: Registered erst as persistent store backend [ 4.095605] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.102042] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.110171] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.118413] Linux agpgart interface v0.103 [ 4.122638] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.131777] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.138660] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.148520] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.153495] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.158738] mousedev: PS/2 mouse device common for all mice [ 4.164352] rtc_cmos 00:02: RTC can wake from S4 [ 4.169272] rtc_cmos 00:02: registered as rtc0 [ 4.173759] rtc_cmos 00:02: setting system clock to 2024-04-25T04:35:42 UTC (1714019742) [ 4.181892] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.189722] intel_pstate: Intel P-state driver initializing [ 4.195616] ledtrig-cpu: registered to indicate activity on CPUs [ 4.219430] NET: Registered PF_INET6 protocol family [ 4.232398] Segment Routing with IPv6 [ 4.236084] In-situ OAM (IOAM) with IPv6 [ 4.240044] mip6: Mobile IPv6 [ 4.243019] NET: Registered PF_PACKET protocol family [ 4.248169] mpls_gso: MPLS GSO support [ 4.252433] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.257977] microcode: Microcode Update Driver: v2.2. [ 4.257985] IPI shorthand broadcast: enabled [ 4.267348] sched_clock: Marking stable (3277892987, 989414370)->(4639154029, -371846672) [ 4.275780] registered taskstats version 1 [ 4.279903] Loading compiled-in X.509 certificates [ 4.324707] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.333438] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.344096] zswap: loaded using pool lzo/zbud [ 4.348679] Key type .fscrypt registered [ 4.352612] Key type fscrypt-provisioning registered [ 4.357873] pstore: Using crash dump compression: deflate [ 4.371429] Key type encrypted registered [ 4.375466] AppArmor: AppArmor sha1 policy hashing enabled [ 4.380961] ima: No TPM chip found, activating TPM-bypass! [ 4.386445] ima: Allocated hash algorithm: sha256 [ 4.391164] ima: No architecture policies found [ 4.395702] evm: Initialising EVM extended attributes: [ 4.400838] evm: security.selinux [ 4.404157] evm: security.SMACK64 (disabled) [ 4.408431] evm: security.SMACK64EXEC (disabled) [ 4.413050] evm: security.SMACK64TRANSMUTE (disabled) [ 4.418102] evm: security.SMACK64MMAP (disabled) [ 4.422721] evm: security.apparmor [ 4.426128] evm: security.ima [ 4.429098] evm: security.capability [ 4.432673] evm: HMAC attrs: 0x1 [ 4.618988] Freeing unused decrypted memory: 2036K [ 4.624477] Freeing unused kernel image (initmem) memory: 2800K [ 4.630476] Write protecting the kernel read-only data: 26624k [ 4.637100] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.644057] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 4.736671] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.743116] x86/mm: Checking user space page tables [ 4.822408] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.828852] Run /init as init process [ 4.832514] with arguments: [ 4.832516] /init [ 4.832517] with environment: [ 4.832518] HOME=/ [ 4.832520] TERM=linux [ 4.832521] BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 [ 4.993445] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999639] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.009648] clocksource: Switched to clocksource tsc [ 5.051076] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.057071] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.062742] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.091518] e1000e: Intel(R) PRO/1000 Network Driver [ 5.096495] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.103013] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.112719] ACPI: bus type USB registered [ 5.116784] usbcore: registered new interface driver usbfs [ 5.122314] usbcore: registered new interface driver hub [ 5.127659] usbcore: registered new device driver usb [ 5.133091] SCSI subsystem initialized [ 5.148277] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.153516] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.160924] ehci-pci 0000:00:1a.0: debug port 2 [ 5.169410] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.176333] libata version 3.00 loaded. [ 5.178054] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.189438] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.195281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.195525] ahci 0000:00:1f.2: version 3.0 [ 5.203560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.210790] usb usb1: Product: EHCI Host Controller [ 5.213886] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.215674] usb usb1: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.223847] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.229936] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.242816] hub 1-0:1.0: USB hub found [ 5.246011] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.246580] hub 1-0:1.0: 2 ports detected [ 5.254493] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.258843] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.265456] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.270601] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.277559] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.284739] ehci-pci 0000:00:1d.0: debug port 2 [ 5.299077] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.302462] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.305540] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.310062] scsi host0: ahci [ 5.310244] scsi host1: ahci [ 5.310391] scsi host2: ahci [ 5.310865] scsi host3: ahci [ 5.311174] scsi host4: ahci [ 5.311319] scsi host5: ahci [ 5.329498] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.329805] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.332922] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.335734] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.335738] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.335766] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.335769] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.341511] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.347728] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.347786] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.348903] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.350548] scsi host6: isci [ 5.357165] usb usb2: Product: EHCI Host Controller [ 5.363169] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.363171] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.370733] usb usb2: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.370735] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.398946] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.400539] hub 2-0:1.0: USB hub found [ 5.408830] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.408917] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.416235] hub 2-0:1.0: 2 ports detected [ 5.537479] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.692486] ata2: SATA link down (SStatus 0 SControl 300) [ 5.697920] ata6: SATA link down (SStatus 0 SControl 300) [ 5.703348] ata4: SATA link down (SStatus 0 SControl 300) [ 5.708783] ata5: SATA link down (SStatus 0 SControl 300) [ 5.709131] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.714228] ata3: SATA link down (SStatus 0 SControl 300) [ 5.722375] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.722703] hub 1-1:1.0: USB hub found [ 5.727820] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.737450] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.739447] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.758266] hub 1-1:1.0: 6 ports detected [ 5.758584] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.770118] ata1.00: configured for UDMA/133 [ 5.777682] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.789111] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.812930] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.820723] sd 0:0:0:0: [sda] Write Protect is off [ 5.821873] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.825523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.829475] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.840792] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.867962] sda: sda1 sda2 < sda5 > [ 5.871876] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.902004] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.910204] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.918056] hub 2-1:1.0: USB hub found [ 5.921920] hub 2-1:1.0: 8 ports detected [ 6.061460] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.174998] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.175170] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.183359] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.183363] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.183365] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.195582] device-mapper: uevent: version 1.0.3 [ 6.218796] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.228132] hid: raw HID events driver (C) Jiri Kosina [ 6.238809] usbcore: registered new interface driver usbhid [ 6.244395] usbhid: USB HID core driver [ 6.250787] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.265565] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.280506] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.353719] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.781628] PM: Image not found (code -22) [ 7.138030] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.149714] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.351504] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.098024] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.121608] ACPI: button: Power Button [PWRB] [ 9.126112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.133601] ACPI: button: Power Button [PWRF] [ 9.147643] dca service started, version 1.12.1 [ 9.274126] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.303618] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.339193] IPMI message handler: version 39.2 [ 9.353215] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.361499] iTCO_vendor_support: vendor-support=0 [ 9.372786] ipmi device interface [ 9.464254] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.513116] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.540700] ipmi_si: IPMI System Interface driver [ 9.545493] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.551864] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.559094] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.565149] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.571281] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.615117] ACPI: bus type drm_connector registered [ 9.620364] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.629092] ipmi_si: Adding ACPI-specified kcs state machine [ 9.634834] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.661096] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.669024] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.674773] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.680431] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.712171] cryptd: max_cpu_qlen set to 1000 [ 9.814978] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.831522] AVX version of gcm_enc/dec engaged. [ 9.831568] AES CTR mode by8 optimization enabled [ 9.835445] Console: switching to colour dummy device 80x25 [ 9.856114] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.865312] fbcon: mgag200drmfb (fb0) is primary device [ 9.885613] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.896954] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.935017] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.971106] ipmi_ssif: IPMI SSIF Interface driver [ 10.236635] Console: switching to colour frame buffer device 128x48 [ 10.344569] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.863398] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.863426] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.863433] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.863441] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.863449] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.863452] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.863460] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.863464] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.863471] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.863475] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.863483] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.863486] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.863494] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.863497] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.863505] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.863508] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.863515] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.863522] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.863530] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.863537] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.863544] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.863551] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.863558] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.863565] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.863574] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.863576] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.863585] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.863587] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.863596] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.863726] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.874778] EDAC sbridge: Ver: 1.1.2 [ 10.968367] intel_rapl_common: Found RAPL domain package [ 10.973704] intel_rapl_common: Found RAPL domain core [ 10.978760] intel_rapl_common: Found RAPL domain dram [ 12.043792] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.485313] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.501478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.549906] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.083247] audit: type=1400 audit(1714019752.260:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1068 comm="apparmor_parser" [ 14.099022] audit: type=1400 audit(1714019752.260:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1067 comm="apparmor_parser" [ 14.114055] audit: type=1400 audit(1714019752.264:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1068 comm="apparmor_parser" [ 14.143890] audit: type=1400 audit(1714019752.320:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1070 comm="apparmor_parser" [ 14.159062] audit: type=1400 audit(1714019752.320:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1070 comm="apparmor_parser" [ 14.174001] audit: type=1400 audit(1714019752.324:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1070 comm="apparmor_parser" [ 14.316427] audit: type=1400 audit(1714019752.492:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1079 comm="apparmor_parser" [ 14.341302] audit: type=1400 audit(1714019752.516:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1069 comm="apparmor_parser" [ 14.359284] audit: type=1400 audit(1714019752.520:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1069 comm="apparmor_parser" [ 14.376739] audit: type=1400 audit(1714019752.520:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1069 comm="apparmor_parser" [ 17.454518] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.464433] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready