[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Apr 25 02:09:13 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 4 vCPUS [ 0.038872] tsc: Fast TSC calibration using PIT [ 0.038874] tsc: Detected 2800.139 MHz processor [ 0.038876] tsc: Detected 2800.000 MHz TSC [ 0.039092] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039097] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039104] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.039108] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039110] MTRRs set to read-only [ 0.039113] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.065617] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.065638] ACPI: Early table checksum verification disabled [ 0.066751] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.066762] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.066795] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.066845] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.066856] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.066867] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066876] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.066887] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.066898] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.066909] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.066920] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.066930] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.066941] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.066951] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.066961] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.066971] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.066982] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.066988] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.066990] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.066992] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066993] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.066995] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.066996] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.066997] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.066998] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.067000] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.067001] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.067002] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.067003] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.067005] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.067006] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.067127] APIC: Switched APIC routing to: Xen PV [ 0.069620] Zone ranges: [ 0.069622] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069625] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.069627] Normal empty [ 0.069629] Movable zone start for each node [ 0.069630] Early memory node ranges [ 0.069631] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.069633] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.069636] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.069647] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069722] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.073788] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.073801] p2m virtual area at (____ptrval____), size is 40000000 [ 0.294260] Remapped 102 page(s) [ 0.294840] ACPI: PM-Timer IO Port: 0x808 [ 0.294869] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.294899] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.294903] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.294928] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.294937] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.294949] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.294954] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.294977] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.294981] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.294994] CPU topo: Max. logical packages: 1 [ 0.294996] CPU topo: Max. logical dies: 1 [ 0.294997] CPU topo: Max. dies per package: 1 [ 0.295004] CPU topo: Max. threads per core: 1 [ 0.295005] CPU topo: Num. cores per package: 4 [ 0.295006] CPU topo: Num. threads per package: 4 [ 0.295007] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.295008] CPU topo: Rejected CPUs 4 [ 0.295026] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.295029] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.295031] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.295033] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.295046] Booting kernel on Xen [ 0.295047] Xen version: 4.19-unstable (preserve-AD) [ 0.295051] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.301448] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.302349] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u524288 [ 0.302359] pcpu-alloc: s194344 r8192 d30936 u524288 alloc=1*2097152 [ 0.302363] pcpu-alloc: [0] 0 1 2 3 [ 0.302441] xen: PV spinlocks enabled [ 0.302445] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.302449] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.302526] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.302731] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.302833] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.303051] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.303056] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.303060] software IO TLB: area num 4. [ 0.408073] Memory: 388496K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135536K reserved, 0K cma-reserved) [ 0.408202] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.411033] Dynamic Preempt: voluntary [ 0.411149] rcu: Preemptible hierarchical RCU implementation. [ 0.411150] rcu: RCU event tracing is enabled. [ 0.411151] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.411153] Trampoline variant of Tasks RCU enabled. [ 0.411155] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.411156] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.411170] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.418276] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.418433] xen:events: Using FIFO-based ABI [ 0.418472] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.418479] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.418485] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.418497] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.418503] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.418509] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.418515] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.418521] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.418527] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.418533] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.418540] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.418546] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.418552] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.418558] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.418564] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.418575] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.424696] Console: colour VGA+ 80x25 [ 0.424701] printk: legacy console [tty0] enabled [ 0.438364] printk: legacy console [hvc0] enabled [ 0.439065] ACPI: Core revision 20230628 [ 0.443000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.443156] Xen: using vcpuop timer interface [ 0.443162] installing Xen timer for CPU 0 [ 0.443412] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 0.443572] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.00 BogoMIPS (lpj=2800000) [ 0.443764] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.443981] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.444108] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.444224] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.444581] Spectre V2 : Mitigation: Retpolines [ 0.444684] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.444826] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.444937] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.445047] RETBleed: Mitigation: untrained return thunk [ 0.445154] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.445326] Speculative Store Bypass: Vulnerable [ 0.445451] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.445573] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.445688] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.445798] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.445907] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.470254] Freeing SMP alternatives memory: 40K [ 0.470435] pid_max: default: 32768 minimum: 301 [ 0.470585] LSM: initializing lsm=capability,selinux [ 0.470698] SELinux: Initializing. [ 0.470875] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.471021] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.471707] cpu 0 spinlock event irq 57 [ 0.471821] VPMU disabled by hypervisor. [ 0.472289] Performance Events: PMU not available due to virtualization, using software events only. [ 0.472450] signal: max sigframe size: 1776 [ 0.472611] rcu: Hierarchical SRCU implementation. [ 0.473573] rcu: Max phase no-delay instances is 400. [ 0.479498] smp: Bringing up secondary CPUs ... [ 0.479780] installing Xen timer for CPU 1 [ 0.480204] installing Xen timer for CPU 2 [ 0.481330] installing Xen timer for CPU 3 [ 0.025989] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.482061] cpu 1 spinlock event irq 77 [ 0.025989] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.482758] cpu 2 spinlock event irq 78 [ 0.025989] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.483741] cpu 3 spinlock event irq 79 [ 0.484826] smp: Brought up 1 node, 4 CPUs [ 0.486731] devtmpfs: initialized [ 0.486759] x86/mm: Memory block size: 128MB [ 0.487759] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.487759] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.487759] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.488059] PM: RTC time: 02:28:06, date: 2024-04-25 [ 0.488392] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.488539] xen:grant_table: Grant tables using version 1 layout [ 0.488601] Grant table initialized [ 0.488939] audit: initializing netlink subsys (disabled) [ 0.489704] audit: type=2000 audit(1714012086.188:1): state=initialized audit_enabled=0 res=1 [ 0.489731] thermal_sys: Registered thermal governor 'step_wise' [ 0.489731] thermal_sys: Registered thermal governor 'user_space' [ 0.491406] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.491949] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.653890] PCI: Using configuration type 1 for base access [ 0.654638] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.655713] ACPI: Added _OSI(Module Device) [ 0.655756] ACPI: Added _OSI(Processor Device) [ 0.655866] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.655976] ACPI: Added _OSI(Processor Aggregator Device) [ 0.662610] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.663219] xen: registering gsi 9 triggering 0 polarity 1 [ 0.667739] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.668178] ACPI: Interpreter enabled [ 0.668329] ACPI: PM: (supports S0 S1 S4 S5) [ 0.668575] ACPI: Using IOAPIC for interrupt routing [ 0.668738] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.668918] PCI: Using E820 reservations for host bridge windows [ 0.669233] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.681221] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.681372] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.681556] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.681574] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.681726] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.682210] PCI host bridge to bus 0000:00 [ 0.682357] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.682502] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.682574] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.682717] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.682886] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.683029] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.683226] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.683892] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.684513] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.684651] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.684772] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.684888] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.685121] pci 0000:00:09.0: enabling Extended Tags [ 0.685387] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.685726] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.685948] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.686067] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.686182] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.686446] pci 0000:00:0a.0: enabling Extended Tags [ 0.686705] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.687040] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.687260] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.687402] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.687563] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.687746] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.687877] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.688007] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.688176] pci 0000:00:11.0: set SATA to AHCI mode [ 0.688545] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.688621] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.689068] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.689292] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.689722] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.689929] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.690325] pci 0000:00:12.2: supports D1 D2 [ 0.690430] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.690745] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.690964] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.691401] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.691627] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.692059] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.692273] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.692672] pci 0000:00:13.2: supports D1 D2 [ 0.692778] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.693120] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.693722] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.693916] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.694046] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.694177] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.694349] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.694511] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.694634] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.694749] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.694858] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.694969] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.695288] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.695902] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.696141] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.696270] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.696397] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.696707] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.696965] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.697415] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.697806] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.698132] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.698543] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.698802] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.699130] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.699710] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.699911] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.700079] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.700215] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.700658] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.703668] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.704030] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.704229] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.704396] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.704556] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.704862] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.707668] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.707850] pci_bus 0000:03: extended config space not accessible [ 0.708037] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.708233] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.708372] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.708541] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.708720] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.709199] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.709333] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.709510] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.709609] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.709970] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.710319] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.710741] pci_bus 0000:00: on NUMA node 0 [ 0.713060] xen: registering gsi 13 triggering 1 polarity 0 [ 0.714717] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.714914] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.715126] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.715352] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.715536] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.715650] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.715834] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.716017] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.716296] xen:balloon: Initialising balloon driver [ 0.717100] iommu: Default domain type: Translated [ 0.717433] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.718013] SCSI subsystem initialized [ 0.718667] libata version 3.00 loaded. [ 0.718849] ACPI: bus type USB registered [ 0.719272] usbcore: registered new interface driver usbfs [ 0.719496] usbcore: registered new interface driver hub [ 0.719641] usbcore: registered new device driver usb [ 0.720030] pps_core: LinuxPPS API ver. 1 registered [ 0.720310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.720595] PTP clock support registered [ 0.721754] Advanced Linux Sound Architecture Driver Initialized. [ 0.723461] NetLabel: Initializing [ 0.723592] NetLabel: domain hash size = 128 [ 0.723877] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.724214] NetLabel: unlabeled traffic allowed by default [ 0.724791] PCI: Using ACPI for IRQ routing [ 0.795556] PCI: pci_cache_line_size set to 64 bytes [ 0.796406] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.796423] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.796742] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.797061] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.797345] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.797598] vgaarb: loaded [ 0.801270] clocksource: Switched to clocksource tsc-early [ 0.801400] VFS: Disk quotas dquot_6.6.0 [ 0.801447] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.801806] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.801887] pnp: PnP ACPI init [ 0.803761] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.804744] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.806459] xen: registering gsi 8 triggering 1 polarity 0 [ 0.807487] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.808616] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.808939] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.810547] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.810841] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.811163] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.811482] system 00:05: [io 0x040b] has been reserved [ 0.811755] system 00:05: [io 0x04d6] has been reserved [ 0.812049] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.812341] system 00:05: [io 0x0c14] has been reserved [ 0.812617] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.812897] system 00:05: [io 0x0c52] has been reserved [ 0.813178] system 00:05: [io 0x0c6c] has been reserved [ 0.813490] system 00:05: [io 0x0c6f] has been reserved [ 0.813702] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.814012] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.814306] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.814593] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.814866] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.815153] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.815472] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.815723] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.816013] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.816315] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.816596] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.816820] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.817116] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.817429] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.818786] xen: registering gsi 4 triggering 1 polarity 0 [ 0.818812] Already setup the GSI :4 [ 0.819097] pnp 00:06: [dma 0 disabled] [ 0.820445] xen: registering gsi 3 triggering 1 polarity 0 [ 0.820494] pnp 00:07: [dma 0 disabled] [ 0.821262] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.822588] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.823119] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.823428] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.823742] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.824049] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.824969] pnp: PnP ACPI: found 10 devices [ 0.917209] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.917437] NET: Registered PF_INET protocol family [ 0.917748] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.918708] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.918882] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.919027] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.919227] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.919417] TCP: Hash tables configured (established 4096 bind 4096) [ 0.919744] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.920199] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.920822] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.921777] RPC: Registered named UNIX socket transport module. [ 0.922070] RPC: Registered udp transport module. [ 0.922347] RPC: Registered tcp transport module. [ 0.922705] RPC: Registered tcp-with-tls transport module. [ 0.923007] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.924144] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.924271] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.924392] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.924522] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.924694] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.925081] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.925625] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.925750] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.925869] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.926027] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.926203] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.926313] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.926425] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.926537] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.926698] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.926808] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.926920] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.927027] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.927138] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.927248] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.927385] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.927495] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.927655] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.927775] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.927889] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.928216] xen: registering gsi 16 triggering 0 polarity 1 [ 0.928272] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.591859] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 648189 usecs [ 1.592109] xen: registering gsi 16 triggering 0 polarity 1 [ 1.592120] Already setup the GSI :16 [ 1.616826] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24195 usecs [ 1.617121] xen: registering gsi 17 triggering 0 polarity 1 [ 1.617184] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.617372] xen: registering gsi 18 triggering 0 polarity 1 [ 1.617391] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.641776] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23885 usecs [ 1.642039] xen: registering gsi 18 triggering 0 polarity 1 [ 1.642051] Already setup the GSI :18 [ 1.667110] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24533 usecs [ 1.667699] xen: registering gsi 19 triggering 0 polarity 1 [ 1.667753] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.667954] xen: registering gsi 18 triggering 0 polarity 1 [ 1.667958] Already setup the GSI :18 [ 1.692273] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23795 usecs [ 1.692710] PCI: CLS 64 bytes, default 64 [ 1.692830] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.693044] Unpacking initramfs... [ 1.693106] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.693903] kvm_intel: VMX not supported by CPU 0 [ 1.694308] kvm_amd: SVM not supported by CPU 0 [ 1.694640] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 1.694842] clocksource: Switched to clocksource tsc [ 1.701012] Initialise system trusted keyrings [ 1.701802] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.702750] NFS: Registering the id_resolver key type [ 1.702871] Key type id_resolver registered [ 1.703011] Key type id_legacy registered [ 1.703206] 9p: Installing v9fs 9p2000 file system support [ 1.738518] Key type asymmetric registered [ 1.738943] Asymmetric key parser 'x509' registered [ 1.739446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.739899] io scheduler mq-deadline registered [ 1.740343] io scheduler kyber registered [ 1.741948] xen: registering gsi 53 triggering 0 polarity 1 [ 1.742241] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.744212] xen: registering gsi 54 triggering 0 polarity 1 [ 1.744362] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.746738] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.747413] ACPI: button: Power Button [PWRB] [ 1.748065] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.748823] ACPI: button: Power Button [PWRF] [ 1.751913] ACPI: \_PR_.P001: Found 2 idle states [ 1.752525] ACPI: \_PR_.P002: Found 2 idle states [ 1.753101] ACPI: \_PR_.P003: Found 2 idle states [ 1.753565] ACPI: \_PR_.P004: Found 2 idle states [ 1.756063] xen:xen_evtchn: Event-channel device installed [ 1.756310] xen_pciback: backend is vpci [ 1.758571] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.760449] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.764405] hpet_acpi_add: no address or irqs in _CRS [ 1.766774] Non-volatile memory driver v1.3 [ 1.780200] loop: module loaded [ 1.791841] ahci 0000:00:11.0: version 3.0 [ 1.792018] xen: registering gsi 22 triggering 0 polarity 1 [ 1.792067] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.792289] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.792458] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.792584] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.794302] scsi host0: ahci [ 1.794876] scsi host1: ahci [ 1.795424] scsi host2: ahci [ 1.795946] scsi host3: ahci [ 1.796124] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.796288] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.796443] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.796596] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.797263] tun: Universal TUN/TAP device driver, 1.6 [ 1.797585] e100: Intel(R) PRO/100 Network Driver [ 1.797700] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.797836] sky2: driver version 1.30 [ 1.798026] xen_netfront: Initialising Xen virtual ethernet driver [ 1.798486] xen: registering gsi 16 triggering 0 polarity 1 [ 1.798501] Already setup the GSI :16 [ 1.798685] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.798943] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.799011] xen: registering gsi 17 triggering 0 polarity 1 [ 1.799122] Already setup the GSI :17 [ 1.799215] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.800436] xen: registering gsi 19 triggering 0 polarity 1 [ 1.800462] Already setup the GSI :19 [ 1.855187] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.855364] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.855506] usb usb1: Product: OHCI PCI host controller [ 1.855612] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.855775] usb usb1: SerialNumber: 0000:00:12.0 [ 1.856211] hub 1-0:1.0: USB hub found [ 1.856327] hub 1-0:1.0: 3 ports detected [ 1.857167] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.857408] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.857572] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.857745] xen: registering gsi 16 triggering 0 polarity 1 [ 1.857772] ehci-pci 0000:00:12.2: debug port 1 [ 1.857778] Already setup the GSI :16 [ 1.858035] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.865039] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.865763] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.866075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.866447] usb usb2: Product: EHCI Host Controller [ 1.866846] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.867083] usb usb2: SerialNumber: 0000:00:12.2 [ 1.868364] hub 2-0:1.0: USB hub found [ 1.868755] hub 2-0:1.0: 6 ports detected [ 1.922145] hub 1-0:1.0: USB hub found [ 1.922336] hub 1-0:1.0: 3 ports detected [ 1.922699] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.923093] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.923261] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.923455] ehci-pci 0000:00:13.2: debug port 1 [ 1.923736] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.930087] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.930384] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.930534] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.930714] usb usb3: Product: EHCI Host Controller [ 1.930819] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.930926] usb usb3: SerialNumber: 0000:00:13.2 [ 1.931338] hub 3-0:1.0: USB hub found [ 1.931476] hub 3-0:1.0: 6 ports detected [ 1.931853] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.932267] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.932865] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.942921] Freeing initrd memory: 20188K [ 1.989490] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.989665] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.989807] usb usb4: Product: OHCI PCI host controller [ 1.989914] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.990044] usb usb4: SerialNumber: 0000:00:12.1 [ 1.990681] hub 4-0:1.0: USB hub found [ 1.990797] hub 4-0:1.0: 3 ports detected [ 1.991244] xen: registering gsi 18 triggering 0 polarity 1 [ 1.991254] Already setup the GSI :18 [ 1.991443] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.991838] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.992086] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.048213] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.048376] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.048556] usb usb5: Product: OHCI PCI host controller [ 2.048661] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.048794] usb usb5: SerialNumber: 0000:00:13.0 [ 2.049116] hub 5-0:1.0: USB hub found [ 2.049245] hub 5-0:1.0: 3 ports detected [ 2.049615] xen: registering gsi 18 triggering 0 polarity 1 [ 2.049623] Already setup the GSI :18 [ 2.049770] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.050053] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.050234] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.105000] ata3: SATA link down (SStatus 0 SControl 300) [ 2.105194] ata4: SATA link down (SStatus 0 SControl 300) [ 2.106150] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.106297] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.106442] usb usb6: Product: OHCI PCI host controller [ 2.106546] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.106657] usb usb6: SerialNumber: 0000:00:13.1 [ 2.106959] hub 6-0:1.0: USB hub found [ 2.107083] hub 6-0:1.0: 3 ports detected [ 2.107414] xen: registering gsi 18 triggering 0 polarity 1 [ 2.107419] Already setup the GSI :18 [ 2.107557] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.107738] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.107912] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.164136] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.164287] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.164427] usb usb7: Product: OHCI PCI host controller [ 2.164530] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.164636] usb usb7: SerialNumber: 0000:00:14.5 [ 2.164981] hub 7-0:1.0: USB hub found [ 2.165106] hub 7-0:1.0: 2 ports detected [ 2.165404] usbcore: registered new interface driver usblp [ 2.165532] usbcore: registered new interface driver usb-storage [ 2.165678] i8042: PNP: No PS/2 controller found. [ 2.165781] i8042: Probing ports directly. [ 2.168976] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.169094] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.169502] rtc_cmos 00:02: RTC can wake from S4 [ 2.170094] rtc_cmos 00:02: registered as rtc0 [ 2.170241] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.170396] device-mapper: uevent: version 1.0.3 [ 2.170576] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.170729] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.170909] hid: raw HID events driver (C) Jiri Kosina [ 2.171245] usbcore: registered new interface driver usbhid [ 2.171350] usbhid: USB HID core driver [ 2.171847] Initializing XFRM netlink socket [ 2.171972] NET: Registered PF_INET6 protocol family [ 2.172572] Segment Routing with IPv6 [ 2.172692] In-situ OAM (IOAM) with IPv6 [ 2.172835] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.173161] NET: Registered PF_PACKET protocol family [ 2.173362] 9pnet: Installing 9P2000 support [ 2.173488] Key type dns_resolver registered [ 2.173605] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.174192] IPI shorthand broadcast: enabled [ 2.178842] sched_clock: Marking stable (2153003500, 24989137)->(2196634856, -18642219) [ 2.179320] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.179641] registered taskstats version 1 [ 2.179742] Loading compiled-in X.509 certificates [ 2.181947] PM: Magic number: 4:3:461 [ 2.182137] printk: legacy console [netcon0] enabled [ 2.182243] netconsole: network logging started [ 2.182453] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.193109] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.193500] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.193662] ALSA device list: [ 2.193759] No soundcards found. [ 2.194600] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.259078] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.259223] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.259878] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.260433] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.260717] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.261141] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.261409] ata2.00: configured for UDMA/133 [ 2.262806] ata1.00: configured for UDMA/133 [ 2.263103] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.263703] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.263733] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.263983] sd 0:0:0:0: [sda] Write Protect is off [ 2.264113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.264162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.264198] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.264353] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.265143] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.265154] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.265407] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.265527] sd 1:0:0:0: [sdb] Write Protect is off [ 2.265632] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.265654] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.265896] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.284986] sda: sda1 sda2 < sda5 > [ 2.285442] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.293392] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.295067] Freeing unused kernel image (initmem) memory: 2664K [ 2.295184] Write protecting the kernel read-only data: 22528k [ 2.305448] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.416710] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.416828] Run /init as init process [ 2.416927] with arguments: [ 2.416928] /init [ 2.416929] placeholder [ 2.416931] with environment: [ 2.416932] HOME=/ [ 2.416933] TERM=linux [ 2.419029] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.586078] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.586267] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.586382] usb 6-2: Product: Hermon USB hidmouse Device [ 2.586487] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.592623] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.593195] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.596642] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.648404] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.686214] e1000e: Intel(R) PRO/1000 Network Driver [ 2.686343] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.686632] xen: registering gsi 48 triggering 0 polarity 1 [ 2.686672] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.686912] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.733059] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.779692] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.779846] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.780050] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.780270] xen: registering gsi 47 triggering 0 polarity 1 [ 2.780296] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.780514] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.827106] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.874733] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.874893] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.875145] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.876011] random: crng init done [ 2.877275] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.878534] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 3.566736] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.577974] EXT4-fs (dm-0): mounted filesystem ee582b18-3383-476d-b2cd-4f000c676396 ro with ordered data mode. Quota mode: none. [ 7.838647] EXT4-fs (dm-0): re-mounted ee582b18-3383-476d-b2cd-4f000c676396 r/w. Quota mode: none. [ 9.384300] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.421394] EXT4-fs (sda1): mounted filesystem 0f076f8e-3238-4549-8f96-dff223ce58cd r/w with ordered data mode. Quota mode: none. [ 9.545059] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.123814] xenbr0: port 1(enx002590aee92a) entered blocking state [ 11.123956] xenbr0: port 1(enx002590aee92a) entered disabled state [ 11.124132] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 11.124292] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 14.511061] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.511750] xenbr0: port 1(enx002590aee92a) entered blocking state [ 14.511870] xenbr0: port 1(enx002590aee92a) entered forwarding state