[ 0.000000] Linux version 6.1.87+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Apr 25 04:47:36 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000468] tsc: Detected 3092.838 MHz processor [ 0.000830] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000835] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000840] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000842] Disabled [ 0.000844] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000849] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000894] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021722] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.021736] ACPI: Early table checksum verification disabled [ 0.023429] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.023442] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.023505] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023584] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023600] ACPI: FACS 0x0000000095FBD000 000040 [ 0.023615] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023630] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023645] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.023660] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.023674] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023688] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023702] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023717] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.023731] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023747] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023762] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023776] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023791] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023843] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023858] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023873] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023887] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023901] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023916] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023931] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023944] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023958] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023972] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023978] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.023980] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.023981] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.023981] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.023982] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.023983] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.023984] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.023984] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.023985] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.023986] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.023987] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.023988] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.023988] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.023989] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.023990] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.023991] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.023991] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.023992] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.023993] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.023993] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.023994] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.023995] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.023995] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.023996] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.023997] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.023998] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.024057] Setting APIC routing to Xen PV. [ 0.027255] Zone ranges: [ 0.027257] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.027259] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.027261] Normal empty [ 0.027262] Movable zone start for each node [ 0.027262] Early memory node ranges [ 0.027263] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.027265] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.027267] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.027275] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.027353] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.030847] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.030852] p2m virtual area at (____ptrval____), size is 40000000 [ 0.171019] Remapped 97 page(s) [ 0.171637] ACPI: PM-Timer IO Port: 0x1808 [ 0.171700] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.171740] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.171755] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.171761] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.171789] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.171795] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.171805] ACPI: SPCR: SPCR table version 1 [ 0.171808] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.171862] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.171882] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.171885] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.171887] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.171901] Booting kernel on Xen [ 0.171902] Xen version: 4.19-unstable (preserve-AD) [ 0.171907] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.177438] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.177934] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.177942] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.177945] pcpu-alloc: [0] 0 1 2 3 [ 0.178023] xen: PV spinlocks enabled [ 0.178028] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.178034] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.178036] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.178084] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.178122] random: crng init done [ 0.178203] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.178244] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.178805] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.178808] software IO TLB: area num 4. [ 0.255012] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.255146] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.257496] Dynamic Preempt: voluntary [ 0.257566] rcu: Preemptible hierarchical RCU implementation. [ 0.257567] rcu: RCU event tracing is enabled. [ 0.257568] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.257569] Trampoline variant of Tasks RCU enabled. [ 0.257571] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.257571] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.265258] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.265375] xen:events: Using FIFO-based ABI [ 0.265414] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.265421] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.265426] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.265432] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.265437] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.265442] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.265448] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.265453] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.265459] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.265464] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.265472] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.265478] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.265483] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.265489] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.265494] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.265505] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.275301] Console: colour VGA+ 80x25 [ 0.294994] printk: console [tty0] enabled [ 0.296076] printk: console [hvc0] enabled [ 0.296229] ACPI: Core revision 20220331 [ 0.316969] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.317214] Xen: using vcpuop timer interface [ 0.317226] installing Xen timer for CPU 0 [ 0.317423] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.317620] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092838) [ 0.317952] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.318098] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.318250] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.318629] Spectre V2 : Mitigation: Retpolines [ 0.318873] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.319047] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.319194] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.319347] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.319525] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.319622] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.320621] MDS: Mitigation: Clear CPU buffers [ 0.320764] MMIO Stale Data: Unknown: No mitigations [ 0.320907] SRBDS: Unknown: Dependent on hypervisor status [ 0.321076] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.321257] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.321400] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.321548] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.321620] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.339741] Freeing SMP alternatives memory: 40K [ 0.339907] pid_max: default: 32768 minimum: 301 [ 0.340080] LSM: Security Framework initializing [ 0.340232] SELinux: Initializing. [ 0.340421] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.340622] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.341736] cpu 0 spinlock event irq 25 [ 0.341882] VPMU disabled by hypervisor. [ 0.342285] cblist_init_generic: Setting adjustable number of callback queues. [ 0.342464] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.342646] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.342832] signal: max sigframe size: 1776 [ 0.343012] rcu: Hierarchical SRCU implementation. [ 0.343193] rcu: Max phase no-delay instances is 400. [ 0.343667] smp: Bringing up secondary CPUs ... [ 0.343986] installing Xen timer for CPU 1 [ 0.344406] cpu 1 spinlock event irq 35 [ 0.344735] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.345114] installing Xen timer for CPU 2 [ 0.345900] cpu 2 spinlock event irq 41 [ 0.345900] installing Xen timer for CPU 3 [ 0.346704] cpu 3 spinlock event irq 47 [ 0.346802] smp: Brought up 1 node, 4 CPUs [ 0.346889] smpboot: Max logical packages: 1 [ 0.347623] devtmpfs: initialized [ 0.347821] x86/mm: Memory block size: 128MB [ 0.348141] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.348141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.348628] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.348936] PM: RTC time: 05:19:24, date: 2024-04-25 [ 0.349255] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.349444] xen:grant_table: Grant tables using version 1 layout [ 0.349625] Grant table initialized [ 0.349909] audit: initializing netlink subsys (disabled) [ 0.350091] audit: type=2000 audit(1714022365.487:1): state=initialized audit_enabled=0 res=1 [ 0.350091] thermal_sys: Registered thermal governor 'step_wise' [ 0.350091] thermal_sys: Registered thermal governor 'user_space' [ 0.350668] Simple Boot Flag at 0x44 set to 0x1 [ 0.350982] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.351299] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.351488] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.397407] PCI: Using configuration type 1 for base access [ 0.397623] PCI: Dell System detected, enabling pci=bfsort. [ 0.399782] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.399858] ACPI: Added _OSI(Module Device) [ 0.399858] ACPI: Added _OSI(Processor Device) [ 0.399946] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.400622] ACPI: Added _OSI(Processor Aggregator Device) [ 0.411302] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.412080] xen: registering gsi 9 triggering 0 polarity 0 [ 0.412545] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.415066] ACPI: Dynamic OEM Table Load: [ 0.415069] ACPI: SSDT 0xFFFF888003C68400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.415528] ACPI: Dynamic OEM Table Load: [ 0.415630] ACPI: SSDT 0xFFFF888003D89800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.416429] ACPI: Dynamic OEM Table Load: [ 0.416579] ACPI: SSDT 0xFFFF888003655400 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.417730] ACPI: Interpreter enabled [ 0.417885] ACPI: PM: (supports S0 S4 S5) [ 0.418029] ACPI: Using IOAPIC for interrupt routing [ 0.418201] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.418379] PCI: Using E820 reservations for host bridge windows [ 0.418776] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.424711] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.433629] ACPI: PM: Power Resource [FN00] [ 0.433810] ACPI: PM: Power Resource [FN01] [ 0.433992] ACPI: PM: Power Resource [FN02] [ 0.434169] ACPI: PM: Power Resource [FN03] [ 0.434346] ACPI: PM: Power Resource [FN04] [ 0.435195] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.435349] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.436368] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.436517] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.437109] PCI host bridge to bus 0000:00 [ 0.437250] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.437395] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.437546] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.437621] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.437799] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.437973] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.438536] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.438707] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.439147] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.439538] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.439682] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.440165] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.440489] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.441001] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.441216] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.441367] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.441845] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.442427] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.442660] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.442808] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.443336] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.443545] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.443965] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.444295] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.444956] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.445166] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.445337] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.445516] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.445655] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.445832] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.446002] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.446334] pci 0000:00:1f.2: PME# supported from D3hot [ 0.446638] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.446857] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.447093] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.447674] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.447976] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.448264] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.448560] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.448716] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.449293] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.450070] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.450373] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.450658] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.450962] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.451220] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.451857] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.452766] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.452941] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.453649] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.456712] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.458286] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.458454] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.458614] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.460062] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.463527] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.465330] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.468945] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.472283] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.472620] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.472893] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.474402] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.479105] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.479460] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.479730] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.480948] pci_bus 0000:05: extended config space not accessible [ 0.481334] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.481959] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.494884] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.495301] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.496774] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.500153] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.500514] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.500774] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.502552] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.503129] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.503540] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.505932] pci 0000:06:00.0: PME# supported from D3hot [ 0.506777] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.507143] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.508424] pci_bus 0000:00: on NUMA node 0 [ 0.508629] xen: registering gsi 13 triggering 1 polarity 0 [ 0.509646] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.509862] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.510076] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.510294] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.510507] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.510620] ACPI: PCI: Interrupt link LNKE disabled [ 0.510838] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.511002] ACPI: PCI: Interrupt link LNKF disabled [ 0.511219] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.511366] ACPI: PCI: Interrupt link LNKG disabled [ 0.511584] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.513194] xen:balloon: Initialising balloon driver [ 0.513670] iommu: Default domain type: Translated [ 0.513813] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.513821] SCSI subsystem initialized [ 0.513965] libata version 3.00 loaded. [ 0.513965] ACPI: bus type USB registered [ 0.513965] usbcore: registered new interface driver usbfs [ 0.513968] usbcore: registered new interface driver hub [ 0.514111] usbcore: registered new device driver usb [ 0.514646] pps_core: LinuxPPS API ver. 1 registered [ 0.514789] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.514999] PTP clock support registered [ 0.515154] Advanced Linux Sound Architecture Driver Initialized. [ 0.515154] NetLabel: Initializing [ 0.515625] NetLabel: domain hash size = 128 [ 0.515763] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.515916] NetLabel: unlabeled traffic allowed by default [ 0.516075] PCI: Using ACPI for IRQ routing [ 0.533444] PCI: pci_cache_line_size set to 64 bytes [ 0.534070] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.534072] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.534092] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.534092] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.534092] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.534621] vgaarb: loaded [ 0.535919] clocksource: Switched to clocksource tsc-early [ 0.536118] VFS: Disk quotas dquot_6.6.0 [ 0.536262] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.536432] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.536613] pnp: PnP ACPI init [ 0.536613] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.536722] system 00:00: [io 0xffff] has been reserved [ 0.536864] system 00:00: [io 0xffff] has been reserved [ 0.537010] system 00:00: [io 0xffff] has been reserved [ 0.537144] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.537286] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.537327] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.537643] xen: registering gsi 8 triggering 1 polarity 0 [ 0.537701] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.538143] xen: registering gsi 3 triggering 1 polarity 0 [ 0.538406] xen: registering gsi 4 triggering 1 polarity 0 [ 0.538409] Already setup the GSI :4 [ 0.538743] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.538894] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.539037] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.539182] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.539324] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.539470] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.539633] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.539777] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.539927] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.540067] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.540213] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.541251] pnp: PnP ACPI: found 7 devices [ 0.561222] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.561433] NET: Registered PF_INET protocol family [ 0.561606] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.561952] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.562133] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.562312] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.562493] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.562700] TCP: Hash tables configured (established 4096 bind 4096) [ 0.562883] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.563053] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.563231] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.563569] RPC: Registered named UNIX socket transport module. [ 0.563731] RPC: Registered udp transport module. [ 0.563873] RPC: Registered tcp transport module. [ 0.564016] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.564421] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.564611] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.564769] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.564941] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.565120] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.565279] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.565433] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.565651] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.565946] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.566205] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.566581] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.566964] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.567205] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.567581] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.567886] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.568386] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.568680] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.568910] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.569328] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.569481] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.569652] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.569849] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.570001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.570150] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.570303] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.570452] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.570606] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.570789] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.570932] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.571108] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.571256] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.571433] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.571585] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.571765] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.571905] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.572082] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.572356] xen: registering gsi 16 triggering 0 polarity 1 [ 0.572376] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.573831] xen: registering gsi 16 triggering 0 polarity 1 [ 0.573835] Already setup the GSI :16 [ 0.586746] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 12661 usecs [ 0.587001] xen: registering gsi 23 triggering 0 polarity 1 [ 0.587015] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.598728] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 11502 usecs [ 0.599222] PCI: CLS 64 bytes, default 64 [ 0.599364] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.599409] Unpacking initramfs... [ 0.599511] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.599917] kvm: no hardware support for 'kvm_intel' [ 0.600067] has_svm: not amd or hygon [ 0.600199] kvm: no hardware support for 'kvm_amd' [ 0.600346] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d9afcf4, max_idle_ns: 440795231738 ns [ 0.600573] clocksource: Switched to clocksource tsc [ 0.603869] Initialise system trusted keyrings [ 0.604086] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.605166] NFS: Registering the id_resolver key type [ 0.605318] Key type id_resolver registered [ 0.605463] Key type id_legacy registered [ 0.605641] 9p: Installing v9fs 9p2000 file system support [ 0.615800] Key type asymmetric registered [ 0.615951] Asymmetric key parser 'x509' registered [ 0.616118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.616310] io scheduler mq-deadline registered [ 0.616451] io scheduler kyber registered [ 0.616931] xen: registering gsi 16 triggering 0 polarity 1 [ 0.616939] Already setup the GSI :16 [ 0.617303] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.617682] xen: registering gsi 18 triggering 0 polarity 1 [ 0.617695] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.617865] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.622257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.622565] ACPI: button: Power Button [PWRF] [ 0.623206] Monitor-Mwait will be used to enter C-1 state [ 0.623231] Monitor-Mwait will be used to enter C-2 state [ 0.623244] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.623726] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.636637] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.636937] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.637493] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.637638] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.638008] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.638184] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.638572] xen:xen_evtchn: Event-channel device installed [ 0.638776] xen_pciback: backend is vpci [ 0.639347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.639591] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.640238] hpet_acpi_add: no address or irqs in _CRS [ 0.640432] Non-volatile memory driver v1.3 [ 0.640570] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.642191] loop: module loaded [ 0.645734] ahci 0000:00:1f.2: version 3.0 [ 0.645830] xen: registering gsi 19 triggering 0 polarity 1 [ 0.645851] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.646016] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.646210] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.646392] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.652580] scsi host0: ahci [ 0.652911] scsi host1: ahci [ 0.653231] scsi host2: ahci [ 0.653507] scsi host3: ahci [ 0.653776] scsi host4: ahci [ 0.654042] scsi host5: ahci [ 0.654219] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.654404] ata2: DUMMY [ 0.654537] ata3: DUMMY [ 0.654671] ata4: DUMMY [ 0.654805] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.654989] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.655347] tun: Universal TUN/TAP device driver, 1.6 [ 0.655672] xen: registering gsi 16 triggering 0 polarity 1 [ 0.655678] Already setup the GSI :16 [ 0.673896] Freeing initrd memory: 19884K [ 0.689160] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.689355] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.689539] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.689717] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.690348] xen: registering gsi 17 triggering 0 polarity 1 [ 0.690371] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.739239] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.739434] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.739622] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.739796] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.740306] e100: Intel(R) PRO/100 Network Driver [ 0.740451] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.740602] sky2: driver version 1.30 [ 0.740765] xen_netfront: Initialising Xen virtual ethernet driver [ 0.741079] xen: registering gsi 16 triggering 0 polarity 1 [ 0.741083] Already setup the GSI :16 [ 0.741290] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.741502] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.741701] ehci-pci 0000:00:1a.0: debug port 2 [ 0.745820] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.752132] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.752397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.752576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.752771] usb usb1: Product: EHCI Host Controller [ 0.752912] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.753057] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.753347] hub 1-0:1.0: USB hub found [ 0.753500] hub 1-0:1.0: 2 ports detected [ 0.753858] xen: registering gsi 23 triggering 0 polarity 1 [ 0.753862] Already setup the GSI :23 [ 0.754056] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.754299] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.754510] ehci-pci 0000:00:1d.0: debug port 2 [ 0.758632] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.765166] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.765383] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.765562] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.765737] usb usb2: Product: EHCI Host Controller [ 0.765881] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.766126] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.766443] hub 2-0:1.0: USB hub found [ 0.766595] hub 2-0:1.0: 2 ports detected [ 0.766976] xen: registering gsi 16 triggering 0 polarity 1 [ 0.766980] Already setup the GSI :16 [ 0.767197] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.767457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.768721] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.769202] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.769446] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.769637] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.769850] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.770035] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.770218] usb usb3: Product: xHCI Host Controller [ 0.770360] usb usb3: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.770501] usb usb3: SerialNumber: 0000:00:14.0 [ 0.770789] hub 3-0:1.0: USB hub found [ 0.770953] hub 3-0:1.0: 10 ports detected [ 0.774369] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.774550] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.774727] usb usb4: Product: xHCI Host Controller [ 0.774871] usb usb4: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.775013] usb usb4: SerialNumber: 0000:00:14.0 [ 0.775332] hub 4-0:1.0: USB hub found [ 0.775491] hub 4-0:1.0: 2 ports detected [ 0.776054] usbcore: registered new interface driver usblp [ 0.776226] usbcore: registered new interface driver usb-storage [ 0.776411] i8042: PNP: No PS/2 controller found. [ 0.776667] rtc_cmos 00:02: RTC can wake from S4 [ 0.777303] rtc_cmos 00:02: registered as rtc0 [ 0.777482] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.777676] device-mapper: uevent: version 1.0.3 [ 0.777748] xen: registering gsi 18 triggering 0 polarity 1 [ 0.777829] Already setup the GSI :18 [ 0.777890] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.778097] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.778176] intel_pstate: CPU model not supported [ 0.778467] hid: raw HID events driver (C) Jiri Kosina [ 0.778701] usbcore: registered new interface driver usbhid [ 0.778843] usbhid: USB HID core driver [ 0.779262] Initializing XFRM netlink socket [ 0.779485] NET: Registered PF_INET6 protocol family [ 0.779927] Segment Routing with IPv6 [ 0.780072] In-situ OAM (IOAM) with IPv6 [ 0.780242] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.780476] NET: Registered PF_PACKET protocol family [ 0.780661] 9pnet: Installing 9P2000 support [ 0.780816] Key type dns_resolver registered [ 0.781159] IPI shorthand broadcast: enabled [ 0.781333] sched_clock: Marking stable (729201217, 52108567)->(789399280, -8089496) [ 0.781745] registered taskstats version 1 [ 0.781884] Loading compiled-in X.509 certificates [ 0.783040] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.783513] PM: Magic number: 4:665:315 [ 0.783687] tty tty40: hash matches [ 0.783865] printk: console [netcon0] enabled [ 0.783866] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.783871] netconsole: network logging started [ 0.784080] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.792528] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.792834] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.793128] ALSA device list: [ 0.793282] No soundcards found. [ 0.793402] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.964295] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.992168] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.008177] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.008201] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.009054] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.010229] ata1.00: configured for UDMA/100 [ 1.010497] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.011246] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.011318] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.011576] sd 0:0:0:0: [sda] Write Protect is off [ 1.011718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.011787] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.012053] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.016161] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 1.120560] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.120735] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.121234] hub 1-1:1.0: USB hub found [ 1.133271] hub 1-1:1.0: 4 ports detected [ 1.146104] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.146289] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.146429] usb 3-9: Product: Gadget USB HUB [ 1.146558] usb 3-9: Manufacturer: no manufacturer [ 1.146689] usb 3-9: SerialNumber: 0123456789 [ 1.147541] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.147713] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.148000] hub 3-9:1.0: USB hub found [ 1.148273] hub 3-9:1.0: 6 ports detected [ 1.148444] hub 2-1:1.0: USB hub found [ 1.148663] hub 2-1:1.0: 6 ports detected [ 1.199250] sda: sda1 sda2 < sda5 > [ 1.199701] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.316335] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.319261] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.323994] ata5.00: configured for UDMA/100 [ 1.327831] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.368720] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.368904] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.388592] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.388669] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.440172] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.527329] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.527512] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.527687] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.527831] usb 3-9.1: Manufacturer: Avocent [ 1.527974] usb 3-9.1: SerialNumber: 20120917 [ 1.534976] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.587414] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.588500] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.588874] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.589850] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.590162] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.700430] ata6: SATA link down (SStatus 0 SControl 300) [ 1.701380] Freeing unused kernel image (initmem) memory: 1580K [ 1.701536] Write protecting the kernel read-only data: 22528k [ 1.714352] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.715266] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.910101] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.910264] Run /init as init process [ 1.910405] with arguments: [ 1.910406] /init [ 1.910407] placeholder [ 1.910407] with environment: [ 1.910408] HOME=/ [ 1.910409] TERM=linux [ 2.136878] tg3 0000:01:00.0 enx549f3505fd58: renamed from eth0 [ 2.140505] tg3 0000:01:00.1 enx549f3505fd5a: renamed from eth1 [ 2.798824] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.803427] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.414997] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.538821] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.548656] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.614554] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.098051] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 9.098248] xenbr0: port 1(enx549f3505fd58) entered disabled state [ 9.098438] device enx549f3505fd58 entered promiscuous mode [ 12.767502] tg3 0000:01:00.0 enx549f3505fd58: Link is up at 1000 Mbps, full duplex [ 12.767717] tg3 0000:01:00.0 enx549f3505fd58: Flow control is off for TX and off for RX [ 12.767898] tg3 0000:01:00.0 enx549f3505fd58: EEE is disabled [ 12.768119] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd58: link becomes ready [ 12.768342] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 12.768492] xenbr0: port 1(enx549f3505fd58) entered forwarding state [ 12.768656] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready