[ 0.000000] Linux version 6.1.87+ (osstest@debina1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Apr 25 07:10:10 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000462] tsc: Detected 2199.996 MHz processor [ 0.000904] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000908] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000915] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000916] Disabled [ 0.000917] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000921] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000960] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027676] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027684] ACPI: Early table checksum verification disabled [ 0.028285] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028297] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028334] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028382] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028398] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028414] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028430] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028446] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028462] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028478] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028494] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028510] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028526] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028542] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028558] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028578] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028594] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028610] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028626] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028641] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028657] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028674] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028682] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028684] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028685] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028686] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028687] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028688] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028689] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028690] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028691] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028692] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028693] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028694] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028695] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028696] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028697] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028698] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028699] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028700] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028701] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028701] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028749] Setting APIC routing to Xen PV. [ 0.032686] Zone ranges: [ 0.032687] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032689] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032691] Normal empty [ 0.032692] Movable zone start for each node [ 0.032693] Early memory node ranges [ 0.032693] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032695] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032697] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032702] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032739] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034284] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034289] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221782] Remapped 102 page(s) [ 0.223135] ACPI: PM-Timer IO Port: 0x408 [ 0.223188] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223191] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223193] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223194] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223196] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223197] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223199] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223200] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223229] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223242] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223245] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223272] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223276] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223346] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223361] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223364] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223365] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223367] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223371] Booting kernel on Xen [ 0.223372] Xen version: 4.19-unstable (preserve-AD) [ 0.223375] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229610] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229894] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229900] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229904] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229985] xen: PV spinlocks enabled [ 0.229988] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229993] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.229995] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230031] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230056] random: crng init done [ 0.230105] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230130] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231450] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231453] software IO TLB: area num 8. [ 0.290904] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291071] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293560] Dynamic Preempt: voluntary [ 0.293658] rcu: Preemptible hierarchical RCU implementation. [ 0.293659] rcu: RCU event tracing is enabled. [ 0.293660] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293662] Trampoline variant of Tasks RCU enabled. [ 0.293663] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293664] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304208] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304332] xen:events: Using FIFO-based ABI [ 0.304357] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304366] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304373] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304380] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304387] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304395] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304402] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304409] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304416] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304423] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304431] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304438] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304445] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304452] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304459] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304470] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309805] Console: colour VGA+ 80x25 [ 0.324397] printk: console [tty0] enabled [ 0.325728] printk: console [hvc0] enabled [ 0.325865] ACPI: Core revision 20220331 [ 0.341330] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341494] Xen: using vcpuop timer interface [ 0.341501] installing Xen timer for CPU 0 [ 0.341651] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.341808] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342134] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342250] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342376] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342522] Spectre V2 : Mitigation: Retpolines [ 0.342634] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.342955] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343073] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343193] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343339] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343455] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343605] MDS: Mitigation: Clear CPU buffers [ 0.343717] TAA: Mitigation: Clear CPU buffers [ 0.343812] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.343975] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344119] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344244] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344362] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344480] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362160] Freeing SMP alternatives memory: 40K [ 0.362286] pid_max: default: 32768 minimum: 301 [ 0.362831] LSM: Security Framework initializing [ 0.362951] SELinux: Initializing. [ 0.363088] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363239] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363899] cpu 0 spinlock event irq 25 [ 0.364017] VPMU disabled by hypervisor. [ 0.364450] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364594] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364749] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364813] signal: max sigframe size: 1776 [ 0.364975] rcu: Hierarchical SRCU implementation. [ 0.365117] rcu: Max phase no-delay instances is 400. [ 0.365604] smp: Bringing up secondary CPUs ... [ 0.365935] installing Xen timer for CPU 1 [ 0.366402] cpu 1 spinlock event irq 35 [ 0.366949] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367116] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367302] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368031] installing Xen timer for CPU 2 [ 0.368499] cpu 2 spinlock event irq 41 [ 0.368899] installing Xen timer for CPU 3 [ 0.369346] cpu 3 spinlock event irq 47 [ 0.369346] installing Xen timer for CPU 4 [ 0.370148] cpu 4 spinlock event irq 53 [ 0.370148] installing Xen timer for CPU 5 [ 0.370985] cpu 5 spinlock event irq 59 [ 0.371014] installing Xen timer for CPU 6 [ 0.371864] cpu 6 spinlock event irq 65 [ 0.372068] installing Xen timer for CPU 7 [ 0.372523] cpu 7 spinlock event irq 71 [ 0.373074] smp: Brought up 1 node, 8 CPUs [ 0.373191] smpboot: Max logical packages: 1 [ 0.373409] devtmpfs: initialized [ 0.373409] x86/mm: Memory block size: 128MB [ 0.374152] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374152] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374255] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374909] PM: RTC time: 08:43:29, date: 2024-04-25 [ 0.375172] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375314] xen:grant_table: Grant tables using version 1 layout [ 0.375449] Grant table initialized [ 0.375751] audit: initializing netlink subsys (disabled) [ 0.375857] audit: type=2000 audit(1714034609.803:1): state=initialized audit_enabled=0 res=1 [ 0.375881] thermal_sys: Registered thermal governor 'step_wise' [ 0.375881] thermal_sys: Registered thermal governor 'user_space' [ 0.376034] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376465] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376820] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505761] PCI: Using configuration type 1 for base access [ 0.508349] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.508872] ACPI: Added _OSI(Module Device) [ 0.508987] ACPI: Added _OSI(Processor Device) [ 0.509099] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509211] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539767] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541690] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544300] ACPI: Dynamic OEM Table Load: [ 0.552724] ACPI: Interpreter enabled [ 0.552831] ACPI: PM: (supports S0 S4 S5) [ 0.552943] ACPI: Using IOAPIC for interrupt routing [ 0.553088] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553237] PCI: Using E820 reservations for host bridge windows [ 0.553806] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.586305] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.586458] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.586693] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.586956] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.587077] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.587250] PCI host bridge to bus 0000:ff [ 0.587361] pci_bus 0000:ff: root bus resource [bus ff] [ 0.587552] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.588019] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.588439] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.588861] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.589323] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.589738] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.590110] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.590552] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.590995] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.591424] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.591860] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.592277] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.592696] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.593110] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.593573] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.593993] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.594412] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.594866] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.595116] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.595569] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.596064] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.596524] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.596986] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.597472] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.597936] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.598387] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.598836] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.599263] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.599722] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.600181] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.600641] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.601094] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.601539] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.601959] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.602376] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.602804] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.603263] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.603722] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.604180] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.604689] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.605107] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.605549] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.605975] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.606220] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.606650] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.607103] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.607523] pci_bus 0000:ff: on NUMA node 0 [ 0.610849] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.610975] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.611248] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.611594] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.611713] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.612141] PCI host bridge to bus 0000:00 [ 0.612254] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.612374] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.612493] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.612635] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.612806] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.612874] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.613503] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.614043] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.614407] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.614920] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.615303] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.615838] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.616188] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.616696] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.617064] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.617581] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.617945] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.618487] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.618852] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.619422] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.620078] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.620736] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.620908] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.621365] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.621704] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.621908] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.622393] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.622696] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.622908] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.623365] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.623752] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.623888] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.624416] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.624728] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.625233] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.625431] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.625552] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.632980] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.633527] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.633720] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.633819] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.634140] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.634687] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.634881] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.635002] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.635284] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.635871] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.636063] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.636184] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.636503] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.636726] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.637222] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.637538] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.638307] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.638499] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.638655] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.638818] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.638974] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.639130] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.639285] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.639626] pci 0000:00:1f.2: PME# supported from D3hot [ 0.639907] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.640122] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.640364] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.640737] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.640909] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.641615] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.641912] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.642268] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.642478] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.643220] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.643435] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.644164] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.644374] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.645090] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.645300] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.645989] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.646122] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.646481] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.646690] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.646950] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.647132] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.647477] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.647721] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.647811] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.648013] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.648132] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.648700] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.648932] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.649213] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.649395] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.649738] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.649893] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.650013] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.650239] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.650359] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.650913] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.651046] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.651182] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.651474] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.651793] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.652056] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.652174] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.652378] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.652592] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.652756] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.653218] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.653675] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.653799] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.653929] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.654304] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.654423] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.654627] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.654839] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.655003] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.655553] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.656014] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.656139] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.656265] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.656599] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.657017] pci 0000:09:00.0: enabling Extended Tags [ 0.657354] pci 0000:09:00.0: supports D1 D2 [ 0.657466] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.657818] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.657943] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.658069] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.658394] pci_bus 0000:0a: extended config space not accessible [ 0.658563] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.658766] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.658858] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.659023] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.659373] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.659685] pci 0000:0a:00.0: supports D1 D2 [ 0.659797] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.660127] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.660264] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.660392] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.660774] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.660895] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.661102] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.661261] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.661771] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.661926] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662100] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.662316] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662458] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.663018] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.663218] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.663448] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.663611] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.664117] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.664344] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.664487] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.664702] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.664811] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.665328] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.665527] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.665734] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.665856] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.666389] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.666616] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666759] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666874] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667016] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667548] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.667747] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.667900] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.668060] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.668564] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.668826] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668969] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.669183] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669326] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669899] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.670024] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.670189] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.670327] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.670793] pci_bus 0000:00: on NUMA node 0 [ 0.670892] xen: registering gsi 13 triggering 1 polarity 0 [ 0.671866] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.672058] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.672245] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.672432] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.672619] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.672735] ACPI: PCI: Interrupt link LNKE disabled [ 0.672882] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.672999] ACPI: PCI: Interrupt link LNKF disabled [ 0.673180] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.673297] ACPI: PCI: Interrupt link LNKG disabled [ 0.673478] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.673594] ACPI: PCI: Interrupt link LNKH disabled [ 0.673860] xen:balloon: Initialising balloon driver [ 0.673997] iommu: Default domain type: Translated [ 0.681813] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.681997] SCSI subsystem initialized [ 0.682122] libata version 3.00 loaded. [ 0.682122] ACPI: bus type USB registered [ 0.682122] usbcore: registered new interface driver usbfs [ 0.682134] usbcore: registered new interface driver hub [ 0.682253] usbcore: registered new device driver usb [ 0.682825] pps_core: LinuxPPS API ver. 1 registered [ 0.682939] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.683087] PTP clock support registered [ 0.683221] Advanced Linux Sound Architecture Driver Initialized. [ 0.683221] NetLabel: Initializing [ 0.683262] NetLabel: domain hash size = 128 [ 0.683923] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.684055] NetLabel: unlabeled traffic allowed by default [ 0.684192] PCI: Using ACPI for IRQ routing [ 0.718704] PCI: pci_cache_line_size set to 64 bytes [ 0.718806] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.718806] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.719848] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.719968] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.720086] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.720813] vgaarb: loaded [ 0.721810] clocksource: Switched to clocksource tsc-early [ 0.721840] VFS: Disk quotas dquot_6.6.0 [ 0.721840] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.721840] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.721840] pnp: PnP ACPI init [ 0.721840] xen: registering gsi 8 triggering 1 polarity 0 [ 0.723087] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.723210] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.723327] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.723445] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.723562] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.723678] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.723797] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.723935] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.724056] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.724175] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.724293] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.724440] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.724559] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.724993] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.725116] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.725233] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.725350] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.725467] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.725924] xen: registering gsi 4 triggering 1 polarity 0 [ 0.725929] Already setup the GSI :4 [ 0.726041] pnp 00:03: [dma 0 disabled] [ 0.726352] xen: registering gsi 3 triggering 1 polarity 0 [ 0.726365] pnp 00:04: [dma 0 disabled] [ 0.726969] pnp: PnP ACPI: found 5 devices [ 0.757111] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.757303] NET: Registered PF_INET protocol family [ 0.757463] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.757903] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.758056] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.758201] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.758350] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.758518] TCP: Hash tables configured (established 4096 bind 4096) [ 0.758659] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.758780] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.758985] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.759449] RPC: Registered named UNIX socket transport module. [ 0.759573] RPC: Registered udp transport module. [ 0.759686] RPC: Registered tcp transport module. [ 0.759797] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.760364] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.760538] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.760701] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.760877] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.761038] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.761211] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.761383] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.761515] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.761677] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.761799] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.761972] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.762116] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.762260] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.762381] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.762523] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.762665] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.762822] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.762955] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763100] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763250] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763394] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763514] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763657] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763799] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763966] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.764102] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.764234] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.764403] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.764573] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.764751] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.764886] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.765024] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.765184] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.765302] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.765439] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.765599] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.765718] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.765876] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.766057] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.766176] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.766313] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.766490] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.766645] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.766797] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.766969] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.767122] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.767273] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.767431] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.767582] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.767734] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.767875] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.768024] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.768156] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.768327] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.768475] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.768593] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.768710] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.768847] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.768971] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.769089] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.769206] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.769349] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.769464] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.769582] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.769700] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.769826] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.769953] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.770073] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.770193] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.770310] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.770425] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.770542] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.771109] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.771330] xen: registering gsi 19 triggering 0 polarity 1 [ 0.771358] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.780161] xen: registering gsi 18 triggering 0 polarity 1 [ 0.780182] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.797218] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16707 usecs [ 0.797469] xen: registering gsi 18 triggering 0 polarity 1 [ 0.797474] Already setup the GSI :18 [ 0.814043] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16239 usecs [ 0.814256] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.814435] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.814512] Unpacking initramfs... [ 0.814553] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.814908] kvm: no hardware support for 'kvm_intel' [ 0.822786] has_svm: not amd or hygon [ 0.822926] kvm: no hardware support for 'kvm_amd' [ 0.823047] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.823586] clocksource: Switched to clocksource tsc [ 0.826036] Initialise system trusted keyrings [ 0.826357] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.827833] NFS: Registering the id_resolver key type [ 0.827955] Key type id_resolver registered [ 0.828066] Key type id_legacy registered [ 0.828278] 9p: Installing v9fs 9p2000 file system support [ 0.842422] Key type asymmetric registered [ 0.842547] Asymmetric key parser 'x509' registered [ 0.842684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.842839] io scheduler mq-deadline registered [ 0.842951] io scheduler kyber registered [ 0.843888] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843919] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.844517] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844523] Already setup the GSI :16 [ 0.845106] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845111] Already setup the GSI :16 [ 0.845448] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845453] Already setup the GSI :16 [ 0.845768] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845772] Already setup the GSI :16 [ 0.846355] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846360] Already setup the GSI :16 [ 0.846924] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846929] Already setup the GSI :16 [ 0.847373] xen: registering gsi 17 triggering 0 polarity 1 [ 0.847390] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.847728] xen: registering gsi 19 triggering 0 polarity 1 [ 0.847732] Already setup the GSI :19 [ 0.848164] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848168] Already setup the GSI :16 [ 0.848849] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.849023] ACPI: button: Power Button [PWRB] [ 0.849168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.849432] ACPI: button: Power Button [PWRF] [ 0.849721] Monitor-Mwait will be used to enter C-1 state [ 0.849758] Monitor-Mwait will be used to enter C-2 state [ 0.849774] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.850150] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.850597] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.850899] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.851415] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.851946] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.852388] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.852788] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.853626] xen:xen_evtchn: Event-channel device installed [ 0.853825] xen_pciback: backend is vpci [ 0.854595] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.854899] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.855628] hpet_acpi_add: no address or irqs in _CRS [ 0.855846] Non-volatile memory driver v1.3 [ 0.855966] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.858588] loop: module loaded [ 0.866082] ahci 0000:00:1f.2: version 3.0 [ 0.866184] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866193] Already setup the GSI :16 [ 0.866529] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.866678] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.881970] scsi host0: ahci [ 0.882425] scsi host1: ahci [ 0.882788] scsi host2: ahci [ 0.883143] scsi host3: ahci [ 0.883487] scsi host4: ahci [ 0.883805] scsi host5: ahci [ 0.883947] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.884092] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.884234] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.884391] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.884534] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.884677] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.885113] tun: Universal TUN/TAP device driver, 1.6 [ 0.885372] e100: Intel(R) PRO/100 Network Driver [ 0.885526] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.885681] sky2: driver version 1.30 [ 0.885867] xen_netfront: Initialising Xen virtual ethernet driver [ 0.886228] xen: registering gsi 18 triggering 0 polarity 1 [ 0.886237] Already setup the GSI :18 [ 0.886460] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.886650] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.886824] ehci-pci 0000:00:1a.0: debug port 2 [ 0.890963] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.897390] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.897610] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.897757] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.897899] usb usb1: Product: EHCI Host Controller [ 0.898012] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.898126] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.898413] hub 1-0:1.0: USB hub found [ 0.898536] hub 1-0:1.0: 2 ports detected [ 0.898902] xen: registering gsi 18 triggering 0 polarity 1 [ 0.898911] Already setup the GSI :18 [ 0.899109] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.899311] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.899498] ehci-pci 0000:00:1d.0: debug port 2 [ 0.903581] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.910394] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.910611] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.910757] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.910899] usb usb2: Product: EHCI Host Controller [ 0.911012] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.911127] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.911401] hub 2-0:1.0: USB hub found [ 0.911531] hub 2-0:1.0: 2 ports detected [ 0.911960] xen: registering gsi 19 triggering 0 polarity 1 [ 0.911969] Already setup the GSI :19 [ 0.912176] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.912443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.913667] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.914150] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.914338] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.914494] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.914701] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.914847] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.914989] usb usb3: Product: xHCI Host Controller [ 0.915102] usb usb3: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.915216] usb usb3: SerialNumber: 0000:00:14.0 [ 0.915514] hub 3-0:1.0: USB hub found [ 0.915652] hub 3-0:1.0: 8 ports detected [ 0.916791] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.916941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.917115] usb usb4: Product: xHCI Host Controller [ 0.917228] usb usb4: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.917354] usb usb4: SerialNumber: 0000:00:14.0 [ 0.917633] hub 4-0:1.0: USB hub found [ 0.917764] hub 4-0:1.0: 6 ports detected [ 0.918988] usbcore: registered new interface driver usblp [ 0.919130] usbcore: registered new interface driver usb-storage [ 0.919278] i8042: PNP: No PS/2 controller found. [ 0.919666] rtc_cmos 00:00: RTC can wake from S4 [ 0.920030] Freeing initrd memory: 19884K [ 0.920347] rtc_cmos 00:00: registered as rtc0 [ 0.920517] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.920725] device-mapper: uevent: version 1.0.3 [ 0.920834] xen: registering gsi 18 triggering 0 polarity 1 [ 0.920846] Already setup the GSI :18 [ 0.920935] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.920994] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.921110] intel_pstate: CPU model not supported [ 0.921169] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.921270] hid: raw HID events driver (C) Jiri Kosina [ 0.921738] usbcore: registered new interface driver usbhid [ 0.921824] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.921856] usbhid: USB HID core driver [ 0.922299] Initializing XFRM netlink socket [ 0.922537] NET: Registered PF_INET6 protocol family [ 0.923031] Segment Routing with IPv6 [ 0.923148] In-situ OAM (IOAM) with IPv6 [ 0.923288] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.923538] NET: Registered PF_PACKET protocol family [ 0.923689] 9pnet: Installing 9P2000 support [ 0.923813] Key type dns_resolver registered [ 0.924560] IPI shorthand broadcast: enabled [ 0.924698] sched_clock: Marking stable (887187645, 37333838)->(1774035212, -849513729) [ 0.925277] registered taskstats version 1 [ 0.925405] Loading compiled-in X.509 certificates [ 0.928085] PM: Magic number: 4:398:726 [ 0.928223] block loop6: hash matches [ 0.928422] acpi LNXCPU:59: hash matches [ 0.928539] acpi LNXCPU:2c: hash matches [ 0.928663] printk: console [netcon0] enabled [ 0.928776] netconsole: network logging started [ 0.929110] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.941138] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.941521] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.942181] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.943128] ALSA device list: [ 0.950094] No soundcards found. [ 1.135452] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151379] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159444] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196299] ata1: SATA link down (SStatus 0 SControl 300) [ 1.196547] ata4: SATA link down (SStatus 0 SControl 300) [ 1.196697] ata2: SATA link down (SStatus 0 SControl 300) [ 1.196835] ata5: SATA link down (SStatus 0 SControl 300) [ 1.196972] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.197133] ata6: SATA link down (SStatus 0 SControl 300) [ 1.198157] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.263900] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.264052] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264450] hub 1-1:1.0: USB hub found [ 1.264647] hub 1-1:1.0: 4 ports detected [ 1.279950] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280224] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280696] hub 2-1:1.0: USB hub found [ 1.280901] hub 2-1:1.0: 4 ports detected [ 1.281523] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.281663] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.286800] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.286950] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287072] usb 3-3: Product: USB2.0 Hub [ 1.287866] hub 3-3:1.0: USB hub found [ 1.288272] hub 3-3:1.0: 4 ports detected [ 1.309371] ata3.00: configured for UDMA/133 [ 1.309814] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.310765] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.310864] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.311089] sd 2:0:0:0: [sda] Write Protect is off [ 1.311212] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.311275] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.311577] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.330720] sda: sda1 sda2 < sda5 > [ 1.331080] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.332301] Freeing unused kernel image (initmem) memory: 1580K [ 1.332443] Write protecting the kernel read-only data: 22528k [ 1.350223] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.351529] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.404394] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.530646] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.530799] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.531467] hub 3-4:1.0: USB hub found [ 1.531673] hub 3-4:1.0: 4 ports detected [ 1.594424] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.671713] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.671867] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.672010] usb 3-3.2: Product: USB2.0 Hub [ 1.672666] hub 3-3.2:1.0: USB hub found [ 1.673109] hub 3-3.2:1.0: 4 ports detected [ 1.809365] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.809490] Run /init as init process [ 1.809600] with arguments: [ 1.809601] /init [ 1.809602] placeholder [ 1.809603] with environment: [ 1.809604] HOME=/ [ 1.809605] TERM=linux [ 1.825407] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.929834] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.929994] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.935988] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.987769] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.990596] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.990944] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.255866] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.256037] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.256505] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.256807] xen: registering gsi 16 triggering 0 polarity 1 [ 2.256820] Already setup the GSI :16 [ 2.260602] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.260753] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.260964] xen: registering gsi 16 triggering 0 polarity 1 [ 2.260973] Already setup the GSI :16 [ 2.286936] pps pps0: new PPS source ptp0 [ 2.287152] igb 0000:07:00.0: added PHC on eth0 [ 2.287284] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.287432] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.287599] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.287713] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.287954] xen: registering gsi 17 triggering 0 polarity 1 [ 2.287963] Already setup the GSI :17 [ 2.317573] pps pps1: new PPS source ptp1 [ 2.317752] igb 0000:08:00.0: added PHC on eth1 [ 2.317884] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.318004] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.318168] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.318282] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.318522] xen: registering gsi 16 triggering 0 polarity 1 [ 2.318529] Already setup the GSI :16 [ 2.376451] igb 0000:0b:00.0: added PHC on eth2 [ 2.376589] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.376709] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.376911] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.377026] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.377255] xen: registering gsi 17 triggering 0 polarity 1 [ 2.377263] Already setup the GSI :17 [ 2.435262] igb 0000:0b:00.1: added PHC on eth3 [ 2.435418] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.435540] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.435763] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.435878] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.436118] xen: registering gsi 18 triggering 0 polarity 1 [ 2.436127] Already setup the GSI :18 [ 2.493369] igb 0000:0b:00.2: added PHC on eth4 [ 2.493511] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.493637] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.493839] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.493954] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.494189] xen: registering gsi 19 triggering 0 polarity 1 [ 2.494198] Already setup the GSI :19 [ 2.552159] igb 0000:0b:00.3: added PHC on eth5 [ 2.552297] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.552435] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.552638] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.552752] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.555794] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.565502] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.575991] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.585547] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.596682] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.608645] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.991781] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.127663] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.127831] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.419396] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.419938] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.420155] xen: registering gsi 17 triggering 0 polarity 1 [ 3.420166] Already setup the GSI :17 [ 4.160407] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.292293] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.292610] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.587316] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.589668] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.598860] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.014971] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.023246] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.715471] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.867912] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.900885] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.987626] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.542936] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.543136] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.543316] device enx0cc47a9f87be entered promiscuous mode [ 15.054941] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.157758] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.158009] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.158130] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.158423] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready