[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Apr 25 13:57:03 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000014] Xen PV: Detected 6 vCPUS [ 0.037370] tsc: Fast TSC calibration using PIT [ 0.037372] tsc: Detected 3101.065 MHz processor [ 0.037374] tsc: Detected 3101.136 MHz TSC [ 0.037580] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037584] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037591] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037596] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037598] MTRRs set to read-only [ 0.037602] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062457] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.062485] ACPI: Early table checksum verification disabled [ 0.063908] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.063921] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.063968] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064031] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.064042] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064053] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064063] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064075] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064085] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064096] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064107] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064117] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064128] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064138] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064148] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064159] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064170] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064181] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064187] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064189] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064190] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064191] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064193] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064194] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064195] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064196] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064198] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064199] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064200] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064201] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064202] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064204] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064205] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064340] APIC: Switched APIC routing to: Xen PV [ 0.066587] Zone ranges: [ 0.066589] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.066591] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.066594] Normal empty [ 0.066595] Movable zone start for each node [ 0.066596] Early memory node ranges [ 0.066597] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.066600] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.066603] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.066618] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.066757] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072467] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072486] p2m virtual area at (____ptrval____), size is 40000000 [ 0.279915] Remapped 106 page(s) [ 0.280436] ACPI: PM-Timer IO Port: 0x808 [ 0.280472] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280505] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280511] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280536] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280546] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280559] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280566] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280592] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280597] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280612] CPU topo: Max. logical packages: 1 [ 0.280614] CPU topo: Max. logical dies: 1 [ 0.280615] CPU topo: Max. dies per package: 1 [ 0.280624] CPU topo: Max. threads per core: 1 [ 0.280626] CPU topo: Num. cores per package: 6 [ 0.280626] CPU topo: Num. threads per package: 6 [ 0.280627] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280628] CPU topo: Rejected CPUs 2 [ 0.280650] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.280653] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.280657] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.280663] Booting kernel on Xen [ 0.280664] Xen version: 4.19-unstable (preserve-AD) [ 0.280670] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.287001] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288338] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u262144 [ 0.288350] pcpu-alloc: s194344 r8192 d30936 u262144 alloc=1*2097152 [ 0.288355] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288459] xen: PV spinlocks enabled [ 0.288463] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288468] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.288569] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.288637] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.288770] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.289034] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.289041] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.289045] software IO TLB: area num 8. [ 0.428385] Memory: 388040K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135992K reserved, 0K cma-reserved) [ 0.428537] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.431670] Dynamic Preempt: voluntary [ 0.431821] rcu: Preemptible hierarchical RCU implementation. [ 0.431822] rcu: RCU event tracing is enabled. [ 0.431823] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.431826] Trampoline variant of Tasks RCU enabled. [ 0.431828] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.431829] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.431847] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.438666] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.438845] xen:events: Using FIFO-based ABI [ 0.438883] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.438890] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.438902] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.438908] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.438913] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.438919] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.438924] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.438929] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.438934] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.438939] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.438944] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.438949] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.438954] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.438959] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.438964] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.438980] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.445043] Console: colour VGA+ 80x25 [ 0.445049] printk: legacy console [tty0] enabled [ 0.458442] printk: legacy console [hvc0] enabled [ 0.459079] ACPI: Core revision 20230628 [ 0.464799] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.464960] Xen: using vcpuop timer interface [ 0.464967] installing Xen timer for CPU 0 [ 0.465222] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb378b39e7, max_idle_ns: 440795289550 ns [ 0.465382] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.27 BogoMIPS (lpj=3101136) [ 0.465617] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.465835] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.465944] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.466058] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.466393] Spectre V2 : Mitigation: Retpolines [ 0.466495] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.466637] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.466747] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.466856] RETBleed: Mitigation: untrained return thunk [ 0.466962] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.467131] Speculative Store Bypass: Vulnerable [ 0.467261] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.467384] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.467493] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.467604] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.467713] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.494989] Freeing SMP alternatives memory: 40K [ 0.495145] pid_max: default: 32768 minimum: 301 [ 0.495308] LSM: initializing lsm=capability,selinux [ 0.495394] SELinux: Initializing. [ 0.495566] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.495714] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.496528] cpu 0 spinlock event irq 57 [ 0.496642] VPMU disabled by hypervisor. [ 0.497105] Performance Events: PMU not available due to virtualization, using software events only. [ 0.497265] signal: max sigframe size: 1776 [ 0.497421] rcu: Hierarchical SRCU implementation. [ 0.498382] rcu: Max phase no-delay instances is 400. [ 0.504414] smp: Bringing up secondary CPUs ... [ 0.504754] installing Xen timer for CPU 1 [ 0.505201] installing Xen timer for CPU 2 [ 0.506836] installing Xen timer for CPU 3 [ 0.508924] installing Xen timer for CPU 4 [ 0.511171] installing Xen timer for CPU 5 [ 0.027390] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.512096] cpu 1 spinlock event irq 87 [ 0.027390] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.512476] cpu 2 spinlock event irq 88 [ 0.027390] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.513611] cpu 3 spinlock event irq 89 [ 0.027390] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0014 [ 0.514434] cpu 4 spinlock event irq 90 [ 0.027390] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0015 [ 0.516393] cpu 5 spinlock event irq 91 [ 0.516611] smp: Brought up 1 node, 6 CPUs [ 0.517729] devtmpfs: initialized [ 0.517729] x86/mm: Memory block size: 128MB [ 0.518897] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.518897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.519389] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.519690] PM: RTC time: 14:18:23, date: 2024-04-25 [ 0.520078] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.520217] xen:grant_table: Grant tables using version 1 layout [ 0.520378] Grant table initialized [ 0.520801] audit: initializing netlink subsys (disabled) [ 0.520995] audit: type=2000 audit(1714054703.378:1): state=initialized audit_enabled=0 res=1 [ 0.521446] thermal_sys: Registered thermal governor 'step_wise' [ 0.521449] thermal_sys: Registered thermal governor 'user_space' [ 0.522440] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.522713] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.596969] PCI: Using configuration type 1 for base access [ 0.597180] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.598475] ACPI: Added _OSI(Module Device) [ 0.598620] ACPI: Added _OSI(Processor Device) [ 0.598723] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.598826] ACPI: Added _OSI(Processor Aggregator Device) [ 0.606314] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.606850] xen: registering gsi 9 triggering 0 polarity 1 [ 0.607724] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.608415] ACPI: Interpreter enabled [ 0.608569] ACPI: PM: (supports S0 S1 S4 S5) [ 0.608679] ACPI: Using IOAPIC for interrupt routing [ 0.608839] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.608988] PCI: Using E820 reservations for host bridge windows [ 0.609296] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.621272] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.621386] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.621544] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.621658] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.621806] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.622309] PCI host bridge to bus 0000:00 [ 0.622382] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.622495] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.622607] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.622752] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.622907] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.623048] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.623212] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.623766] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.624275] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.624450] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.624568] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.624682] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.624842] pci 0000:00:09.0: enabling Extended Tags [ 0.625062] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.625356] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.625450] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.625567] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.625682] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.625843] pci 0000:00:0a.0: enabling Extended Tags [ 0.626058] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.626357] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.626423] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.626591] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.626732] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.626873] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.627014] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.627176] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.627537] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.627723] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.628141] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.628329] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.628668] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.628856] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.629224] pci 0000:00:12.2: supports D1 D2 [ 0.629327] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.629537] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.629725] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.630136] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.630327] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.630711] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.630900] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.631237] pci 0000:00:13.2: supports D1 D2 [ 0.631341] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.631555] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.632069] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.632256] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.632381] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.632508] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.632637] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.632762] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.632920] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.633041] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.633158] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.633296] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.633575] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.634059] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.634291] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.634398] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.634528] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.634804] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.634990] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.635401] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.635778] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.636097] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.636420] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.636768] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.637124] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.637635] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.637828] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.637990] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.638123] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.638522] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.641430] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.641734] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.641929] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.642092] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.642224] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.642593] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.645432] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.645603] pci_bus 0000:03: extended config space not accessible [ 0.645788] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.645979] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.646114] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.646246] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.646522] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.646988] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.647124] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.647269] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.647382] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.647530] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.647676] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.647891] pci_bus 0000:00: on NUMA node 0 [ 0.648615] xen: registering gsi 13 triggering 1 polarity 0 [ 0.649141] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.649367] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.649466] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.649655] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.649844] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.650040] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.650229] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.650420] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.650739] xen:balloon: Initialising balloon driver [ 0.650873] iommu: Default domain type: Translated [ 0.651384] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.651618] SCSI subsystem initialized [ 0.651743] libata version 3.00 loaded. [ 0.651743] ACPI: bus type USB registered [ 0.651743] usbcore: registered new interface driver usbfs [ 0.651743] usbcore: registered new interface driver hub [ 0.652383] usbcore: registered new device driver usb [ 0.652525] pps_core: LinuxPPS API ver. 1 registered [ 0.652639] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.652788] PTP clock support registered [ 0.652924] Advanced Linux Sound Architecture Driver Initialized. [ 0.653595] NetLabel: Initializing [ 0.653695] NetLabel: domain hash size = 128 [ 0.653797] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.653924] NetLabel: unlabeled traffic allowed by default [ 0.654055] PCI: Using ACPI for IRQ routing [ 0.678992] PCI: pci_cache_line_size set to 64 bytes [ 0.679175] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.679181] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.679211] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.679211] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.679211] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.679382] vgaarb: loaded [ 0.683672] clocksource: Switched to clocksource tsc-early [ 0.683913] VFS: Disk quotas dquot_6.6.0 [ 0.684029] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.684188] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.684355] pnp: PnP ACPI init [ 0.684611] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.684884] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.685428] xen: registering gsi 8 triggering 1 polarity 0 [ 0.685706] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.686061] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.686182] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.686726] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.686843] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.686958] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.687108] system 00:05: [io 0x040b] has been reserved [ 0.687220] system 00:05: [io 0x04d6] has been reserved [ 0.687333] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.687454] system 00:05: [io 0x0c14] has been reserved [ 0.687567] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.687680] system 00:05: [io 0x0c52] has been reserved [ 0.687793] system 00:05: [io 0x0c6c] has been reserved [ 0.687905] system 00:05: [io 0x0c6f] has been reserved [ 0.688016] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.688130] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.688245] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.688408] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.688522] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.688637] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.688752] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.688866] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.688980] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.689094] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.689208] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.689323] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.689446] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.689563] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.689979] xen: registering gsi 4 triggering 1 polarity 0 [ 0.689983] Already setup the GSI :4 [ 0.690088] pnp 00:06: [dma 0 disabled] [ 0.690447] xen: registering gsi 3 triggering 1 polarity 0 [ 0.690455] pnp 00:07: [dma 0 disabled] [ 0.690644] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.691083] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.691281] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.691413] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.691532] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.691651] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.691951] pnp: PnP ACPI: found 10 devices [ 0.717821] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.718082] NET: Registered PF_INET protocol family [ 0.718324] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.718820] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.718991] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.719134] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.719298] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.719522] TCP: Hash tables configured (established 4096 bind 4096) [ 0.719756] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.719882] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.720092] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.720781] RPC: Registered named UNIX socket transport module. [ 0.721149] RPC: Registered udp transport module. [ 0.721416] RPC: Registered tcp transport module. [ 0.721695] RPC: Registered tcp-with-tls transport module. [ 0.722025] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722890] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.723045] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.723168] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.723298] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.723425] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.723544] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.723676] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.723793] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.723911] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.724071] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.724183] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.724306] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.724467] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.724583] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.724694] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.724801] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.724910] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.725017] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.725127] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.725235] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.725345] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.725462] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.725573] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.725685] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.725834] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.726173] xen: registering gsi 16 triggering 0 polarity 1 [ 0.726238] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.376698] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635399 usecs [ 1.376981] xen: registering gsi 16 triggering 0 polarity 1 [ 1.376998] Already setup the GSI :16 [ 1.401731] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24233 usecs [ 1.402021] xen: registering gsi 17 triggering 0 polarity 1 [ 1.402113] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.402324] xen: registering gsi 18 triggering 0 polarity 1 [ 1.402344] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.426592] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23758 usecs [ 1.426844] xen: registering gsi 18 triggering 0 polarity 1 [ 1.426862] Already setup the GSI :18 [ 1.451571] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24205 usecs [ 1.451831] xen: registering gsi 19 triggering 0 polarity 1 [ 1.451921] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.452150] xen: registering gsi 18 triggering 0 polarity 1 [ 1.452155] Already setup the GSI :18 [ 1.476630] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23961 usecs [ 1.476878] PCI: CLS 64 bytes, default 64 [ 1.477017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.477133] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.477318] Unpacking initramfs... [ 1.477374] kvm_intel: VMX not supported by CPU 0 [ 1.477590] kvm_amd: SVM not supported by CPU 0 [ 1.477707] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb378b39e7, max_idle_ns: 440795289550 ns [ 1.478071] clocksource: Switched to clocksource tsc [ 1.530299] Initialise system trusted keyrings [ 1.531054] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.532957] NFS: Registering the id_resolver key type [ 1.533547] Key type id_resolver registered [ 1.533934] Key type id_legacy registered [ 1.534757] 9p: Installing v9fs 9p2000 file system support [ 1.555865] Key type asymmetric registered [ 1.556027] Asymmetric key parser 'x509' registered [ 1.556190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.556355] io scheduler mq-deadline registered [ 1.556486] io scheduler kyber registered [ 1.557439] xen: registering gsi 53 triggering 0 polarity 1 [ 1.557479] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.557831] xen: registering gsi 54 triggering 0 polarity 1 [ 1.557852] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.558264] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.558479] ACPI: button: Power Button [PWRB] [ 1.558630] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.558912] ACPI: button: Power Button [PWRF] [ 1.561941] ACPI: \_PR_.P001: Found 2 idle states [ 1.562233] ACPI: \_PR_.P002: Found 2 idle states [ 1.562379] ACPI: \_PR_.P003: Found 2 idle states [ 1.564133] ACPI: \_PR_.P004: Found 2 idle states [ 1.564293] ACPI: \_PR_.P005: Found 2 idle states [ 1.564554] ACPI: \_PR_.P006: Found 2 idle states [ 1.566547] xen:xen_evtchn: Event-channel device installed [ 1.566945] xen_pciback: backend is vpci [ 1.569563] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.570167] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.571276] hpet_acpi_add: no address or irqs in _CRS [ 1.571471] Non-volatile memory driver v1.3 [ 1.576938] loop: module loaded [ 1.611783] ahci 0000:00:11.0: version 3.0 [ 1.611962] xen: registering gsi 22 triggering 0 polarity 1 [ 1.612009] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.612195] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.612353] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.612473] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.614681] scsi host0: ahci [ 1.615289] scsi host1: ahci [ 1.615853] scsi host2: ahci [ 1.616370] scsi host3: ahci [ 1.616558] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.616705] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.616850] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.617007] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.619862] tun: Universal TUN/TAP device driver, 1.6 [ 1.621113] e100: Intel(R) PRO/100 Network Driver [ 1.621694] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.622230] sky2: driver version 1.30 [ 1.623280] xen_netfront: Initialising Xen virtual ethernet driver [ 1.625362] xen: registering gsi 17 triggering 0 polarity 1 [ 1.625378] Already setup the GSI :17 [ 1.625602] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.625712] xen: registering gsi 19 triggering 0 polarity 1 [ 1.625727] Already setup the GSI :19 [ 1.625721] xen: registering gsi 16 triggering 0 polarity 1 [ 1.625867] Already setup the GSI :16 [ 1.625915] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.626155] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.626322] ehci-pci 0000:00:12.2: debug port 1 [ 1.626969] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.634479] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.635262] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.635429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.635570] usb usb1: Product: EHCI Host Controller [ 1.635675] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.635786] usb usb1: SerialNumber: 0000:00:12.2 [ 1.636893] hub 1-0:1.0: USB hub found [ 1.637420] hub 1-0:1.0: 6 ports detected [ 1.639405] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.639971] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.640122] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.640296] ehci-pci 0000:00:13.2: debug port 1 [ 1.640868] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.648488] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.648763] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 1.648911] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.649056] usb usb2: Product: EHCI Host Controller [ 1.649170] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 1.649279] usb usb2: SerialNumber: 0000:00:13.2 [ 1.649778] hub 2-0:1.0: USB hub found [ 1.649926] hub 2-0:1.0: 6 ports detected [ 1.650357] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.650620] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.650863] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.705724] Freeing initrd memory: 20188K [ 1.706612] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.706786] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.706926] usb usb3: Product: OHCI PCI host controller [ 1.707033] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.707151] usb usb3: SerialNumber: 0000:00:12.0 [ 1.707979] hub 3-0:1.0: USB hub found [ 1.708095] hub 3-0:1.0: 3 ports detected [ 1.708675] xen: registering gsi 16 triggering 0 polarity 1 [ 1.708691] Already setup the GSI :16 [ 1.708881] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.709216] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.709452] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.765637] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.765813] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.765954] usb usb4: Product: OHCI PCI host controller [ 1.766059] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.766165] usb usb4: SerialNumber: 0000:00:12.1 [ 1.766806] hub 4-0:1.0: USB hub found [ 1.766921] hub 4-0:1.0: 3 ports detected [ 1.767370] xen: registering gsi 18 triggering 0 polarity 1 [ 1.767383] Already setup the GSI :18 [ 1.767582] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.767923] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.768194] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.823633] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.823811] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.823951] usb usb5: Product: OHCI PCI host controller [ 1.824055] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.824162] usb usb5: SerialNumber: 0000:00:13.0 [ 1.824951] hub 5-0:1.0: USB hub found [ 1.825600] hub 5-0:1.0: 3 ports detected [ 1.828182] xen: registering gsi 18 triggering 0 polarity 1 [ 1.828221] Already setup the GSI :18 [ 1.828879] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.829744] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.829956] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.885651] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.885842] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.885983] usb usb6: Product: OHCI PCI host controller [ 1.886097] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.886206] usb usb6: SerialNumber: 0000:00:13.1 [ 1.886944] hub 6-0:1.0: USB hub found [ 1.887059] hub 6-0:1.0: 3 ports detected [ 1.887573] xen: registering gsi 18 triggering 0 polarity 1 [ 1.887591] Already setup the GSI :18 [ 1.887771] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.888139] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.888361] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.927067] ata4: SATA link down (SStatus 0 SControl 300) [ 1.927979] ata3: SATA link down (SStatus 0 SControl 300) [ 1.944644] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 1.944827] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.944973] usb usb7: Product: OHCI PCI host controller [ 1.945107] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 1.945213] usb usb7: SerialNumber: 0000:00:14.5 [ 1.945726] hub 7-0:1.0: USB hub found [ 1.945842] hub 7-0:1.0: 2 ports detected [ 1.946206] usbcore: registered new interface driver usblp [ 1.946332] usbcore: registered new interface driver usb-storage [ 1.946513] i8042: PNP: No PS/2 controller found. [ 1.946618] i8042: Probing ports directly. [ 1.949801] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.949912] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.950290] rtc_cmos 00:02: RTC can wake from S4 [ 1.950907] rtc_cmos 00:02: registered as rtc0 [ 1.951091] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.951316] device-mapper: uevent: version 1.0.3 [ 1.951591] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.951749] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.951905] hid: raw HID events driver (C) Jiri Kosina [ 1.952261] usbcore: registered new interface driver usbhid [ 1.952381] usbhid: USB HID core driver [ 1.953068] Initializing XFRM netlink socket [ 1.953194] NET: Registered PF_INET6 protocol family [ 1.954094] Segment Routing with IPv6 [ 1.954220] In-situ OAM (IOAM) with IPv6 [ 1.954368] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.954718] NET: Registered PF_PACKET protocol family [ 1.954866] 9pnet: Installing 9P2000 support [ 1.954997] Key type dns_resolver registered [ 1.955138] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.956097] IPI shorthand broadcast: enabled [ 1.987779] sched_clock: Marking stable (1961040870, 26390828)->(1995441539, -8009841) [ 1.989571] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.990910] registered taskstats version 1 [ 1.991264] Loading compiled-in X.509 certificates [ 1.995586] PM: Magic number: 4:622:334 [ 1.995797] tty tty55: hash matches [ 1.995922] ohci-pci 0000:00:13.0: hash matches [ 1.996139] printk: legacy console [netcon0] enabled [ 1.997733] netconsole: network logging started [ 1.998028] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.039861] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.040290] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.040471] ALSA device list: [ 2.040569] No soundcards found. [ 2.041377] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.080561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.083913] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.085001] ata2.00: configured for UDMA/100 [ 2.088488] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.090173] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.090741] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.092541] ata1.00: configured for UDMA/133 [ 2.093613] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.094969] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.095317] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.095490] sd 0:0:0:0: [sda] Write Protect is off [ 2.095598] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.095622] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.095816] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.096444] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.128828] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.129307] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.129514] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.134856] sda: sda1 sda2 < sda5 > [ 2.135444] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.141431] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.141650] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.144383] Freeing unused kernel image (initmem) memory: 2664K [ 2.144516] Write protecting the kernel read-only data: 22528k [ 2.184721] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.289649] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.289816] Run /init as init process [ 2.289917] with arguments: [ 2.289918] /init [ 2.289919] placeholder [ 2.289921] with environment: [ 2.289922] HOME=/ [ 2.289924] TERM=linux [ 2.292731] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.293269] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.293568] usb 6-2: Product: Hermon USB hidmouse Device [ 2.293675] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.299062] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.299567] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.302919] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.354926] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.708961] e1000e: Intel(R) PRO/1000 Network Driver [ 2.709087] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.709330] xen: registering gsi 48 triggering 0 polarity 1 [ 2.709482] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.709747] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.756267] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.803413] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.803593] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.803782] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.804041] xen: registering gsi 47 triggering 0 polarity 1 [ 2.804068] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.804245] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.851499] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.901195] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.901344] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.901543] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.903470] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.903778] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.082430] random: crng init done [ 3.681902] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.687160] EXT4-fs (dm-0): mounted filesystem 74c8e1d0-16d2-43cd-ba6f-6115c719dafd ro with ordered data mode. Quota mode: none. [ 7.913667] EXT4-fs (dm-0): re-mounted 74c8e1d0-16d2-43cd-ba6f-6115c719dafd r/w. Quota mode: none. [ 9.248077] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.276223] EXT4-fs (sda1): mounted filesystem 9c34a59b-1ee1-4e8f-b147-72ab67ba2d13 r/w with ordered data mode. Quota mode: none. [ 9.343743] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.989363] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 10.989556] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 10.989675] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 10.989830] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 14.100437] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.101131] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 14.101260] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state