[ 0.000000] Linux version 6.9.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Apr 25 13:57:03 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037370] tsc: Fast TSC calibration using PIT [ 0.037372] tsc: Detected 3101.124 MHz processor [ 0.037374] tsc: Detected 3101.158 MHz TSC [ 0.037582] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037587] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037594] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037598] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037600] MTRRs set to read-only [ 0.037604] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062388] RAMDISK: [mem 0x04000000-0x053b6fff] [ 0.062415] ACPI: Early table checksum verification disabled [ 0.063890] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.063903] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.063949] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064013] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20230628/tbfadt-564) [ 0.064026] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064037] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064048] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064059] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064070] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064082] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064093] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064104] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064115] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064126] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064136] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064147] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064157] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064168] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064173] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064175] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064176] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064177] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064179] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064181] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064182] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064183] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064184] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064185] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064187] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064188] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064189] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064190] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064191] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064329] APIC: Switched APIC routing to: Xen PV [ 0.066585] Zone ranges: [ 0.066587] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.066589] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.066592] Normal empty [ 0.066593] Movable zone start for each node [ 0.066594] Early memory node ranges [ 0.066595] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.066598] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.066601] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.066616] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.066740] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072486] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072507] p2m virtual area at (____ptrval____), size is 40000000 [ 0.279869] Remapped 106 page(s) [ 0.280391] ACPI: PM-Timer IO Port: 0x808 [ 0.280427] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280458] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280464] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280490] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280498] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280512] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280519] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280546] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280550] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280565] CPU topo: Max. logical packages: 1 [ 0.280567] CPU topo: Max. logical dies: 1 [ 0.280568] CPU topo: Max. dies per package: 1 [ 0.280576] CPU topo: Max. threads per core: 1 [ 0.280578] CPU topo: Num. cores per package: 6 [ 0.280579] CPU topo: Num. threads per package: 6 [ 0.280580] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280581] CPU topo: Rejected CPUs 2 [ 0.280601] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.280604] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.280608] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.280613] Booting kernel on Xen [ 0.280614] Xen version: 4.19-unstable (preserve-AD) [ 0.280620] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.286945] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288269] percpu: Embedded 57 pages/cpu s194344 r8192 d30936 u262144 [ 0.288281] pcpu-alloc: s194344 r8192 d30936 u262144 alloc=1*2097152 [ 0.288287] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288389] xen: PV spinlocks enabled [ 0.288395] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288399] Kernel command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.288499] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.288568] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.288714] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.288976] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.288981] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.288986] software IO TLB: area num 8. [ 0.428558] Memory: 388040K/524284K available (16384K kernel code, 2741K rwdata, 6044K rodata, 2664K init, 1908K bss, 135992K reserved, 0K cma-reserved) [ 0.428711] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.431836] Dynamic Preempt: voluntary [ 0.431985] rcu: Preemptible hierarchical RCU implementation. [ 0.431986] rcu: RCU event tracing is enabled. [ 0.431987] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.431990] Trampoline variant of Tasks RCU enabled. [ 0.431991] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.431993] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.432014] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.438851] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.439029] xen:events: Using FIFO-based ABI [ 0.439067] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.439073] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.439087] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.439093] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.439099] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.439104] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.439109] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.439114] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.439119] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.439124] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.439130] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.439135] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.439140] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.439145] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.439150] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.439165] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.445208] Console: colour VGA+ 80x25 [ 0.445215] printk: legacy console [tty0] enabled [ 0.458609] printk: legacy console [hvc0] enabled [ 0.459262] ACPI: Core revision 20230628 [ 0.464979] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.465138] Xen: using vcpuop timer interface [ 0.465146] installing Xen timer for CPU 0 [ 0.465399] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb38dadc77, max_idle_ns: 440795241714 ns [ 0.465560] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.31 BogoMIPS (lpj=3101158) [ 0.465767] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.465988] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.466097] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.466214] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.466573] Spectre V2 : Mitigation: Retpolines [ 0.466675] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.466818] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.466927] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.467036] RETBleed: Mitigation: untrained return thunk [ 0.467148] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.467327] Speculative Store Bypass: Vulnerable [ 0.467456] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.467563] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.467672] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.467782] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.467891] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.495032] Freeing SMP alternatives memory: 40K [ 0.495187] pid_max: default: 32768 minimum: 301 [ 0.495350] LSM: initializing lsm=capability,selinux [ 0.495473] SELinux: Initializing. [ 0.495627] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.495774] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.496700] cpu 0 spinlock event irq 57 [ 0.496816] VPMU disabled by hypervisor. [ 0.497281] Performance Events: PMU not available due to virtualization, using software events only. [ 0.497440] signal: max sigframe size: 1776 [ 0.497596] rcu: Hierarchical SRCU implementation. [ 0.498561] rcu: Max phase no-delay instances is 400. [ 0.504631] smp: Bringing up secondary CPUs ... [ 0.504964] installing Xen timer for CPU 1 [ 0.505451] installing Xen timer for CPU 2 [ 0.505876] installing Xen timer for CPU 3 [ 0.506283] installing Xen timer for CPU 4 [ 0.506673] installing Xen timer for CPU 5 [ 0.027385] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0011 [ 0.506913] cpu 1 spinlock event irq 87 [ 0.027385] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0012 [ 0.507671] cpu 2 spinlock event irq 88 [ 0.027385] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0013 [ 0.508777] cpu 3 spinlock event irq 89 [ 0.027385] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0014 [ 0.509607] cpu 4 spinlock event irq 90 [ 0.027385] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0015 [ 0.510858] cpu 5 spinlock event irq 91 [ 0.511776] smp: Brought up 1 node, 6 CPUs [ 0.512810] devtmpfs: initialized [ 0.512810] x86/mm: Memory block size: 128MB [ 0.513995] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.513995] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.513995] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.514834] PM: RTC time: 14:17:41, date: 2024-04-25 [ 0.515235] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.515380] xen:grant_table: Grant tables using version 1 layout [ 0.515550] Grant table initialized [ 0.515876] audit: initializing netlink subsys (disabled) [ 0.516042] audit: type=2000 audit(1714054662.040:1): state=initialized audit_enabled=0 res=1 [ 0.516613] thermal_sys: Registered thermal governor 'step_wise' [ 0.516617] thermal_sys: Registered thermal governor 'user_space' [ 0.519823] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.520600] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 1.191643] PCI: Using configuration type 1 for base access [ 1.192782] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.193742] ACPI: Added _OSI(Module Device) [ 1.194562] ACPI: Added _OSI(Processor Device) [ 1.194666] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.194770] ACPI: Added _OSI(Processor Aggregator Device) [ 1.219494] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.220283] xen: registering gsi 9 triggering 0 polarity 1 [ 1.234595] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 1.235008] ACPI: Interpreter enabled [ 1.235148] ACPI: PM: (supports S0 S1 S4 S5) [ 1.235254] ACPI: Using IOAPIC for interrupt routing [ 1.235431] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.235560] PCI: Using E820 reservations for host bridge windows [ 1.235837] ACPI: Enabled 4 GPEs in block 00 to 1F [ 1.296095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.296238] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.296397] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 1.296509] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 1.296560] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 1.297081] PCI host bridge to bus 0000:00 [ 1.297184] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.297301] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.297418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.297560] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 1.297703] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 1.297846] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.298016] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 1.300363] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 1.300893] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 1.301104] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.301224] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.301340] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.301510] pci 0000:00:09.0: enabling Extended Tags [ 1.301679] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.301982] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 1.302197] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.302317] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.302486] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.302610] pci 0000:00:0a.0: enabling Extended Tags [ 1.302828] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.303142] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 1.303329] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 1.303623] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 1.304305] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 1.304585] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 1.304752] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 1.304878] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 1.305261] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.305448] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 1.305871] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.306102] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 1.306504] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.306603] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 1.306928] pci 0000:00:12.2: supports D1 D2 [ 1.307031] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.307299] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 1.307515] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 1.307827] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 1.308014] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 1.308410] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 1.308601] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 1.308935] pci 0000:00:13.2: supports D1 D2 [ 1.309038] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.309321] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 1.309824] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 1.310019] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 1.310150] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 1.310278] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 1.310404] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 1.310532] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 1.310613] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 1.310723] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 1.310832] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 1.310942] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 1.311242] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 1.311747] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 1.311975] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.312103] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.312224] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.312504] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 1.312607] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 1.313032] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 1.313410] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 1.313723] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 1.314030] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 1.314380] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 1.314739] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 1.315204] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.315434] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 1.315594] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 1.315725] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 1.316083] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.318614] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.318959] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 1.319154] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 1.319317] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 1.319460] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 1.319833] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.322607] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.322779] pci_bus 0000:03: extended config space not accessible [ 1.322987] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 1.323181] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 1.323316] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 1.323455] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 1.323704] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.324141] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 1.324275] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.324419] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.324560] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.324746] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 1.324894] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 1.325099] pci_bus 0000:00: on NUMA node 0 [ 1.325753] xen: registering gsi 13 triggering 1 polarity 0 [ 1.326306] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.326550] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 1.327277] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 1.327619] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 1.327805] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 1.327998] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.328189] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.328380] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 1.329170] xen:balloon: Initialising balloon driver [ 1.329706] iommu: Default domain type: Translated [ 1.329830] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.330074] SCSI subsystem initialized [ 1.330625] libata version 3.00 loaded. [ 1.330639] ACPI: bus type USB registered [ 1.330771] usbcore: registered new interface driver usbfs [ 1.330886] usbcore: registered new interface driver hub [ 1.331004] usbcore: registered new device driver usb [ 1.331169] pps_core: LinuxPPS API ver. 1 registered [ 1.331597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.332157] PTP clock support registered [ 1.332650] Advanced Linux Sound Architecture Driver Initialized. [ 1.333076] NetLabel: Initializing [ 1.333174] NetLabel: domain hash size = 128 [ 1.333560] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.333728] NetLabel: unlabeled traffic allowed by default [ 1.333866] PCI: Using ACPI for IRQ routing [ 1.369260] PCI: pci_cache_line_size set to 64 bytes [ 1.369465] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 1.369476] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 1.369660] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 1.369745] pci 0000:03:04.0: vgaarb: bridge control possible [ 1.369853] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.370006] vgaarb: loaded [ 1.371287] clocksource: Switched to clocksource tsc-early [ 1.371554] VFS: Disk quotas dquot_6.6.0 [ 1.371554] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.371554] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.371554] pnp: PnP ACPI init [ 1.371779] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 1.371851] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 1.372603] xen: registering gsi 8 triggering 1 polarity 0 [ 1.372870] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 1.373209] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.373325] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.374632] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 1.374752] system 00:05: [io 0x0550-0x0551] has been reserved [ 1.374863] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 1.375015] system 00:05: [io 0x040b] has been reserved [ 1.375125] system 00:05: [io 0x04d6] has been reserved [ 1.375245] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 1.375354] system 00:05: [io 0x0c14] has been reserved [ 1.375459] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 1.375581] system 00:05: [io 0x0c52] has been reserved [ 1.375688] system 00:05: [io 0x0c6c] has been reserved [ 1.375794] system 00:05: [io 0x0c6f] has been reserved [ 1.375900] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 1.376009] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 1.376118] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 1.376226] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 1.376373] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 1.376482] system 00:05: [io 0x0800-0x089f] has been reserved [ 1.376605] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 1.376713] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 1.376821] system 00:05: [io 0x0900-0x090f] has been reserved [ 1.376930] system 00:05: [io 0x0910-0x091f] has been reserved [ 1.377039] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 1.377149] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 1.377260] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 1.377370] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 1.377841] xen: registering gsi 4 triggering 1 polarity 0 [ 1.377849] Already setup the GSI :4 [ 1.377951] pnp 00:06: [dma 0 disabled] [ 1.378281] xen: registering gsi 3 triggering 1 polarity 0 [ 1.378291] pnp 00:07: [dma 0 disabled] [ 1.378471] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 1.378918] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 1.379108] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.379221] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.379335] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 1.379449] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.379753] pnp: PnP ACPI: found 10 devices [ 1.402107] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.402676] NET: Registered PF_INET protocol family [ 1.402905] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.403389] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.403543] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.403748] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.403950] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.404174] TCP: Hash tables configured (established 4096 bind 4096) [ 1.404352] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.404471] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.404675] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.405147] RPC: Registered named UNIX socket transport module. [ 1.405262] RPC: Registered udp transport module. [ 1.405405] RPC: Registered tcp transport module. [ 1.405507] RPC: Registered tcp-with-tls transport module. [ 1.405634] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.406286] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.406401] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.406521] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 1.406687] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 1.406835] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 1.406952] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.407080] pci 0000:00:14.4: PCI bridge to [bus 03] [ 1.407195] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 1.407314] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 1.407471] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.407595] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.407706] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.407819] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.407932] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.408044] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.408188] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 1.408297] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.408404] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 1.408514] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 1.408633] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 1.408745] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 1.408855] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 1.408963] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.409074] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 1.409185] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.409568] xen: registering gsi 16 triggering 0 polarity 1 [ 1.409714] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.060124] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 635473 usecs [ 2.060702] xen: registering gsi 16 triggering 0 polarity 1 [ 2.060715] Already setup the GSI :16 [ 2.084863] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23651 usecs [ 2.085121] xen: registering gsi 17 triggering 0 polarity 1 [ 2.085219] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.085413] xen: registering gsi 18 triggering 0 polarity 1 [ 2.085433] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.109771] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23841 usecs [ 2.110004] xen: registering gsi 18 triggering 0 polarity 1 [ 2.110018] Already setup the GSI :18 [ 2.134788] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24260 usecs [ 2.135032] xen: registering gsi 19 triggering 0 polarity 1 [ 2.135170] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.135449] xen: registering gsi 18 triggering 0 polarity 1 [ 2.135452] Already setup the GSI :18 [ 2.160294] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 24313 usecs [ 2.160772] PCI: CLS 64 bytes, default 64 [ 2.160893] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.161003] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 2.161258] kvm_intel: VMX not supported by CPU 0 [ 2.161300] Unpacking initramfs... [ 2.161364] kvm_amd: SVM not supported by CPU 0 [ 2.161375] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb38dadc77, max_idle_ns: 440795241714 ns [ 2.161867] clocksource: Switched to clocksource tsc [ 2.168798] Initialise system trusted keyrings [ 2.169259] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 2.169828] NFS: Registering the id_resolver key type [ 2.169947] Key type id_resolver registered [ 2.170048] Key type id_legacy registered [ 2.170229] 9p: Installing v9fs 9p2000 file system support [ 2.190134] Key type asymmetric registered [ 2.190285] Asymmetric key parser 'x509' registered [ 2.190494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.190677] io scheduler mq-deadline registered [ 2.190782] io scheduler kyber registered [ 2.191732] xen: registering gsi 53 triggering 0 polarity 1 [ 2.191795] xen: --> pirq=53 -> irq=53 (gsi=53) [ 2.192126] xen: registering gsi 54 triggering 0 polarity 1 [ 2.192143] xen: --> pirq=54 -> irq=54 (gsi=54) [ 2.192636] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.192828] ACPI: button: Power Button [PWRB] [ 2.192974] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.193205] ACPI: button: Power Button [PWRF] [ 2.195989] ACPI: \_PR_.P001: Found 2 idle states [ 2.196229] ACPI: \_PR_.P002: Found 2 idle states [ 2.196383] ACPI: \_PR_.P003: Found 2 idle states [ 2.198040] ACPI: \_PR_.P004: Found 2 idle states [ 2.198243] ACPI: \_PR_.P005: Found 2 idle states [ 2.198422] ACPI: \_PR_.P006: Found 2 idle states [ 2.199556] xen:xen_evtchn: Event-channel device installed [ 2.199814] xen_pciback: backend is vpci [ 2.200932] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.201376] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.202283] hpet_acpi_add: no address or irqs in _CRS [ 2.202477] Non-volatile memory driver v1.3 [ 2.206601] loop: module loaded [ 2.232757] ahci 0000:00:11.0: version 3.0 [ 2.232962] xen: registering gsi 22 triggering 0 polarity 1 [ 2.233023] xen: --> pirq=22 -> irq=22 (gsi=22) [ 2.233258] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 2.233434] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.233548] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.235766] scsi host0: ahci [ 2.237511] scsi host1: ahci [ 2.238191] scsi host2: ahci [ 2.239227] scsi host3: ahci [ 2.239430] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 2.239578] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 2.239725] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 2.239873] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 2.240747] tun: Universal TUN/TAP device driver, 1.6 [ 2.241301] e100: Intel(R) PRO/100 Network Driver [ 2.241423] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.241917] sky2: driver version 1.30 [ 2.243114] xen_netfront: Initialising Xen virtual ethernet driver [ 2.245185] xen: registering gsi 17 triggering 0 polarity 1 [ 2.245201] Already setup the GSI :17 [ 2.245402] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.245672] xen: registering gsi 16 triggering 0 polarity 1 [ 2.245691] Already setup the GSI :16 [ 2.245702] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.245719] xen: registering gsi 19 triggering 0 polarity 1 [ 2.245731] Already setup the GSI :19 [ 2.246689] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.247326] ehci-pci 0000:00:12.2: debug port 1 [ 2.248335] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 2.255447] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.255936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 2.256125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.256267] usb usb1: Product: EHCI Host Controller [ 2.256377] usb usb1: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 2.256503] usb usb1: SerialNumber: 0000:00:12.2 [ 2.256987] hub 1-0:1.0: USB hub found [ 2.257127] hub 1-0:1.0: 6 ports detected [ 2.257680] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.257983] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 2.258235] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 2.314560] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.314749] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.314896] usb usb2: Product: OHCI PCI host controller [ 2.315008] usb usb2: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.315118] usb usb2: SerialNumber: 0000:00:12.0 [ 2.315596] hub 2-0:1.0: USB hub found [ 2.315711] hub 2-0:1.0: 3 ports detected [ 2.316065] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.316216] xen: registering gsi 16 triggering 0 polarity 1 [ 2.316225] Already setup the GSI :16 [ 2.316392] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.316566] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.316739] ehci-pci 0000:00:13.2: debug port 1 [ 2.317007] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 2.323439] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.323738] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 2.323918] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.324059] usb usb3: Product: EHCI Host Controller [ 2.324169] usb usb3: Manufacturer: Linux 6.9.0-rc5+ ehci_hcd [ 2.324277] usb usb3: SerialNumber: 0000:00:13.2 [ 2.324698] hub 3-0:1.0: USB hub found [ 2.324811] hub 3-0:1.0: 6 ports detected [ 2.325205] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 2.325540] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.325779] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 2.381646] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.381841] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.381988] usb usb4: Product: OHCI PCI host controller [ 2.382094] usb usb4: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.382203] usb usb4: SerialNumber: 0000:00:12.1 [ 2.382819] hub 4-0:1.0: USB hub found [ 2.382991] hub 4-0:1.0: 3 ports detected [ 2.383602] xen: registering gsi 18 triggering 0 polarity 1 [ 2.383618] Already setup the GSI :18 [ 2.383798] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.384074] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.384321] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 2.440704] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.440892] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.441032] usb usb5: Product: OHCI PCI host controller [ 2.441143] usb usb5: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.441253] usb usb5: SerialNumber: 0000:00:13.0 [ 2.441808] hub 5-0:1.0: USB hub found [ 2.441976] hub 5-0:1.0: 3 ports detected [ 2.442619] xen: registering gsi 18 triggering 0 polarity 1 [ 2.442633] Already setup the GSI :18 [ 2.442811] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.443103] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.443313] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.498170] Freeing initrd memory: 20188K [ 2.499652] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.499802] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.499940] usb usb6: Product: OHCI PCI host controller [ 2.500042] usb usb6: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.500153] usb usb6: SerialNumber: 0000:00:13.1 [ 2.500571] hub 6-0:1.0: USB hub found [ 2.500703] hub 6-0:1.0: 3 ports detected [ 2.501171] xen: registering gsi 18 triggering 0 polarity 1 [ 2.501179] Already setup the GSI :18 [ 2.501324] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.501525] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.501711] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.552348] ata3: SATA link down (SStatus 0 SControl 300) [ 2.552501] ata4: SATA link down (SStatus 0 SControl 300) [ 2.557650] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09 [ 2.557800] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.557937] usb usb7: Product: OHCI PCI host controller [ 2.558040] usb usb7: Manufacturer: Linux 6.9.0-rc5+ ohci_hcd [ 2.558146] usb usb7: SerialNumber: 0000:00:14.5 [ 2.558477] hub 7-0:1.0: USB hub found [ 2.558609] hub 7-0:1.0: 2 ports detected [ 2.558964] usbcore: registered new interface driver usblp [ 2.559090] usbcore: registered new interface driver usb-storage [ 2.559233] i8042: PNP: No PS/2 controller found. [ 2.559334] i8042: Probing ports directly. [ 2.562555] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.562666] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.563068] rtc_cmos 00:02: RTC can wake from S4 [ 2.563583] rtc_cmos 00:02: registered as rtc0 [ 2.563726] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.563880] device-mapper: uevent: version 1.0.3 [ 2.564064] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.564214] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.564367] hid: raw HID events driver (C) Jiri Kosina [ 2.564686] usbcore: registered new interface driver usbhid [ 2.564790] usbhid: USB HID core driver [ 2.565269] Initializing XFRM netlink socket [ 2.565399] NET: Registered PF_INET6 protocol family [ 2.566026] Segment Routing with IPv6 [ 2.566142] In-situ OAM (IOAM) with IPv6 [ 2.566281] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.566557] NET: Registered PF_PACKET protocol family [ 2.566704] 9pnet: Installing 9P2000 support [ 2.566820] Key type dns_resolver registered [ 2.566934] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.567635] IPI shorthand broadcast: enabled [ 2.571978] sched_clock: Marking stable (2545003422, 26385725)->(2624665331, -53276184) [ 2.572557] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.572937] registered taskstats version 1 [ 2.573037] Loading compiled-in X.509 certificates [ 2.575082] PM: Magic number: 4:72:284 [ 2.575246] printk: legacy console [netcon0] enabled [ 2.575350] netconsole: network logging started [ 2.575627] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.587006] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.587409] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.588161] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.588333] ALSA device list: [ 2.588438] No soundcards found. [ 2.706507] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.706650] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.708371] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.708846] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.710661] ata1.00: configured for UDMA/133 [ 2.710925] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.711401] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.711513] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.711554] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.711887] sd 0:0:0:0: [sda] Write Protect is off [ 2.711993] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.712018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.712205] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.712427] ata2.00: configured for UDMA/100 [ 2.719432] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.740093] sda: sda1 sda2 < sda5 > [ 2.740524] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.745847] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.745999] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.763881] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.764016] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.765826] Freeing unused kernel image (initmem) memory: 2664K [ 2.765943] Write protecting the kernel read-only data: 22528k [ 2.775169] Freeing unused kernel image (rodata/data gap) memory: 100K [ 2.810427] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.879471] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.879586] Run /init as init process [ 2.879683] with arguments: [ 2.879684] /init [ 2.879686] placeholder [ 2.879687] with environment: [ 2.879688] HOME=/ [ 2.879689] TERM=linux [ 2.973441] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.973597] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.973708] usb 6-2: Product: Hermon USB hidmouse Device [ 2.973811] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.979860] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.980238] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.983844] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 3.036728] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 3.133338] e1000e: Intel(R) PRO/1000 Network Driver [ 3.133473] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.133716] xen: registering gsi 48 triggering 0 polarity 1 [ 3.133811] xen: --> pirq=48 -> irq=48 (gsi=48) [ 3.134074] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.177259] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 3.224141] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2e [ 3.224293] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.224526] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.224769] xen: registering gsi 47 triggering 0 polarity 1 [ 3.224796] xen: --> pirq=47 -> irq=47 (gsi=47) [ 3.225020] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.272531] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 3.322138] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2f [ 3.322288] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.322489] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.324395] e1000e 0000:01:00.0 enx0cc47a0a492e: renamed from eth0 [ 3.324793] e1000e 0000:02:00.0 enx0cc47a0a492f: renamed from eth1 [ 3.441425] random: crng init done [ 3.997639] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.009045] EXT4-fs (dm-0): mounted filesystem 51a861f9-1084-49b1-8a6e-c2145ccc073e ro with ordered data mode. Quota mode: none. [ 7.560184] EXT4-fs (dm-0): re-mounted 51a861f9-1084-49b1-8a6e-c2145ccc073e r/w. Quota mode: none. [ 8.933855] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.955420] EXT4-fs (sda1): mounted filesystem 1272a74c-fdbd-4f40-b0b1-83e8ce4ecfe5 r/w with ordered data mode. Quota mode: none. [ 9.032045] Adding 1949692k swap on /dev/mapper/rimava0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.554910] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 10.555046] xenbr0: port 1(enx0cc47a0a492e) entered disabled state [ 10.555174] e1000e 0000:01:00.0 enx0cc47a0a492e: entered allmulticast mode [ 10.555329] e1000e 0000:01:00.0 enx0cc47a0a492e: entered promiscuous mode [ 13.710424] e1000e 0000:01:00.0 enx0cc47a0a492e: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.710979] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 13.711096] xenbr0: port 1(enx0cc47a0a492e) entered forwarding state