[ 0.000000] Linux version 6.1.87+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Apr 25 20:36:27 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2199.998 MHz processor [ 0.000900] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000904] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000911] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000912] Disabled [ 0.000913] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000917] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000957] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027754] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027763] ACPI: Early table checksum verification disabled [ 0.028362] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028374] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028410] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028459] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028475] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028490] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028506] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028522] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028538] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028554] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028570] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028586] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028602] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028618] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028639] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028654] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028670] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028686] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028702] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028718] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028734] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028750] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028758] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028760] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028762] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028763] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028764] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028765] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028765] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028766] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028767] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028768] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028769] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028770] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028771] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028772] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028773] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028774] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028775] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028776] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028777] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028778] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028825] Setting APIC routing to Xen PV. [ 0.032762] Zone ranges: [ 0.032764] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032766] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032768] Normal empty [ 0.032769] Movable zone start for each node [ 0.032770] Early memory node ranges [ 0.032770] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032772] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032774] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032779] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032815] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034360] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034366] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221839] Remapped 102 page(s) [ 0.223190] ACPI: PM-Timer IO Port: 0x408 [ 0.223244] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223246] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223248] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223250] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223251] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223253] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223254] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223255] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223284] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223297] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223301] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223327] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223331] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223401] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223416] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223418] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223419] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223421] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223426] Booting kernel on Xen [ 0.223427] Xen version: 4.19-unstable (preserve-AD) [ 0.223430] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229660] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229942] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229948] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229951] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230033] xen: PV spinlocks enabled [ 0.230036] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230041] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230043] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230080] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230104] random: crng init done [ 0.230153] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230178] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231498] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231500] software IO TLB: area num 8. [ 0.290922] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291089] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293564] Dynamic Preempt: voluntary [ 0.293663] rcu: Preemptible hierarchical RCU implementation. [ 0.293664] rcu: RCU event tracing is enabled. [ 0.293665] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293667] Trampoline variant of Tasks RCU enabled. [ 0.293667] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293668] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304301] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304423] xen:events: Using FIFO-based ABI [ 0.304449] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304457] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304465] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304472] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304479] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304486] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304494] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304501] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304508] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304515] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304522] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304530] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304537] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304544] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304551] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304562] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309908] Console: colour VGA+ 80x25 [ 0.324614] printk: console [tty0] enabled [ 0.325941] printk: console [hvc0] enabled [ 0.326079] ACPI: Core revision 20220331 [ 0.341576] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341742] Xen: using vcpuop timer interface [ 0.341749] installing Xen timer for CPU 0 [ 0.341899] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342058] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342385] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342502] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342629] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342777] Spectre V2 : Mitigation: Retpolines [ 0.343064] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343218] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343337] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343458] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343605] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343723] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343874] MDS: Mitigation: Clear CPU buffers [ 0.343987] TAA: Mitigation: Clear CPU buffers [ 0.344061] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344226] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344371] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344523] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344641] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344760] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362420] Freeing SMP alternatives memory: 40K [ 0.362545] pid_max: default: 32768 minimum: 301 [ 0.363079] LSM: Security Framework initializing [ 0.363201] SELinux: Initializing. [ 0.363340] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363490] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364148] cpu 0 spinlock event irq 25 [ 0.364268] VPMU disabled by hypervisor. [ 0.364702] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364848] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365005] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365063] signal: max sigframe size: 1776 [ 0.365225] rcu: Hierarchical SRCU implementation. [ 0.365358] rcu: Max phase no-delay instances is 400. [ 0.365840] smp: Bringing up secondary CPUs ... [ 0.366177] installing Xen timer for CPU 1 [ 0.366647] cpu 1 spinlock event irq 35 [ 0.367199] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367367] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367555] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368281] installing Xen timer for CPU 2 [ 0.368764] cpu 2 spinlock event irq 41 [ 0.369135] installing Xen timer for CPU 3 [ 0.369582] cpu 3 spinlock event irq 47 [ 0.369582] installing Xen timer for CPU 4 [ 0.370399] cpu 4 spinlock event irq 53 [ 0.370399] installing Xen timer for CPU 5 [ 0.371233] cpu 5 spinlock event irq 59 [ 0.371265] installing Xen timer for CPU 6 [ 0.372110] cpu 6 spinlock event irq 65 [ 0.372320] installing Xen timer for CPU 7 [ 0.372750] cpu 7 spinlock event irq 71 [ 0.373321] smp: Brought up 1 node, 8 CPUs [ 0.373439] smpboot: Max logical packages: 1 [ 0.373657] devtmpfs: initialized [ 0.374073] x86/mm: Memory block size: 128MB [ 0.374421] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374421] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374509] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375178] PM: RTC time: 21:28:07, date: 2024-04-25 [ 0.375444] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375590] xen:grant_table: Grant tables using version 1 layout [ 0.375727] Grant table initialized [ 0.376030] audit: initializing netlink subsys (disabled) [ 0.376107] audit: type=2000 audit(1714080487.865:1): state=initialized audit_enabled=0 res=1 [ 0.376147] thermal_sys: Registered thermal governor 'step_wise' [ 0.376147] thermal_sys: Registered thermal governor 'user_space' [ 0.376286] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377094] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377249] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506019] PCI: Using configuration type 1 for base access [ 0.508609] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509119] ACPI: Added _OSI(Module Device) [ 0.509225] ACPI: Added _OSI(Processor Device) [ 0.509338] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509451] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539618] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541618] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544382] ACPI: Dynamic OEM Table Load: [ 0.553655] ACPI: Interpreter enabled [ 0.553788] ACPI: PM: (supports S0 S4 S5) [ 0.553899] ACPI: Using IOAPIC for interrupt routing [ 0.554044] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.554210] PCI: Using E820 reservations for host bridge windows [ 0.554834] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.587266] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.587397] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.587634] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.587931] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.588051] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.588225] PCI host bridge to bus 0000:ff [ 0.588338] pci_bus 0000:ff: root bus resource [bus ff] [ 0.588530] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.588975] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.589366] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.589785] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.590223] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.590641] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.591061] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.591479] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.591923] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.592357] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.592774] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.593195] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.593616] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.594033] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.594373] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.594796] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.595220] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.595643] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.595895] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.596353] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.596820] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.597283] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.597744] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.598207] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.598673] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.599127] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.599546] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.599974] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.600404] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.600865] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.601327] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.601780] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.602202] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.602621] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.603065] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.603494] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.603956] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.604404] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.604865] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.605361] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.605780] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.606201] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.606624] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.606877] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.607310] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.607735] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.608159] pci_bus 0000:ff: on NUMA node 0 [ 0.612463] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.612590] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.612867] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.613215] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.613336] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.613811] PCI host bridge to bus 0000:00 [ 0.613924] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.614046] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.614061] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.614205] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.614349] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.614527] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.615168] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.615683] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.616046] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.616564] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.616949] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.617451] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.617802] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.618311] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.618683] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.619204] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.619568] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.620083] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.620479] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.621046] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.621560] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.622232] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.622447] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.622903] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.623251] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.623467] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.623924] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.623924] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.623924] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.623924] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.624056] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.624056] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.624056] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.625256] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.625796] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.625994] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.626070] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.634228] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.634778] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.634973] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.635069] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.635359] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.635906] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.636109] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.636231] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.636515] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.637061] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.637255] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.637382] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.637706] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.637901] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.638429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.638750] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.639500] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.639693] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.639850] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.640006] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.640102] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.640258] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.640415] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.640723] pci 0000:00:1f.2: PME# supported from D3hot [ 0.641007] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.641157] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.641404] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.641780] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.641997] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.642645] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.642943] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.643274] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.643485] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.644234] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.644446] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.645150] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.645361] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.646067] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.646278] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.646967] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.647079] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.647415] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.647626] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.647908] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.648088] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.648443] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.648662] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.648783] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.648987] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.649060] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.649633] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.649844] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.650128] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.650311] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.650656] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.650857] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651010] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.651110] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.651231] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.651782] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.651916] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.652054] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.652344] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.652632] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.652991] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.653060] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.653270] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.653490] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.653654] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.654182] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.654642] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.654767] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.654902] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.655255] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.655374] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.655579] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.655794] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.655958] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.656468] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.656924] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.657049] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.657179] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.657515] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.657910] pci 0000:09:00.0: enabling Extended Tags [ 0.658248] pci 0000:09:00.0: supports D1 D2 [ 0.658362] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.658716] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.658842] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.658972] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.659240] pci_bus 0000:0a: extended config space not accessible [ 0.659411] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.659614] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.659780] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.659946] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.660297] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.660598] pci 0000:0a:00.0: supports D1 D2 [ 0.660711] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.661144] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.661282] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.661412] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.661797] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.661995] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.662148] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.662309] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.662818] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.663060] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663206] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.663423] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.663567] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.664130] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.664329] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.664544] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.664704] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.665210] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.665438] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665582] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.665804] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665948] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666424] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.666624] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.666831] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.666991] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.667448] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.667676] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667820] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668036] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668060] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.668596] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.668795] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.669002] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.669105] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.669620] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.669850] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669994] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670124] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670268] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670848] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.670978] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.671070] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.671209] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.671673] pci_bus 0000:00: on NUMA node 0 [ 0.671767] xen: registering gsi 13 triggering 1 polarity 0 [ 0.672748] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.672944] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.673136] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.673326] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.673517] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.673643] ACPI: PCI: Interrupt link LNKE disabled [ 0.673827] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.673945] ACPI: PCI: Interrupt link LNKF disabled [ 0.674134] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.674252] ACPI: PCI: Interrupt link LNKG disabled [ 0.674438] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.674556] ACPI: PCI: Interrupt link LNKH disabled [ 0.674822] xen:balloon: Initialising balloon driver [ 0.675154] iommu: Default domain type: Translated [ 0.682061] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.682245] SCSI subsystem initialized [ 0.683083] libata version 3.00 loaded. [ 0.683099] ACPI: bus type USB registered [ 0.683226] usbcore: registered new interface driver usbfs [ 0.683348] usbcore: registered new interface driver hub [ 0.683469] usbcore: registered new device driver usb [ 0.683469] pps_core: LinuxPPS API ver. 1 registered [ 0.683469] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.683469] PTP clock support registered [ 0.684135] Advanced Linux Sound Architecture Driver Initialized. [ 0.684398] NetLabel: Initializing [ 0.684510] NetLabel: domain hash size = 128 [ 0.684510] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.684510] NetLabel: unlabeled traffic allowed by default [ 0.684510] PCI: Using ACPI for IRQ routing [ 0.719220] PCI: pci_cache_line_size set to 64 bytes [ 0.719985] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.719988] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.720087] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.720208] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.720325] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.720473] vgaarb: loaded [ 0.722418] clocksource: Switched to clocksource tsc-early [ 0.722633] VFS: Disk quotas dquot_6.6.0 [ 0.722766] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722909] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.722909] pnp: PnP ACPI init [ 0.723205] xen: registering gsi 8 triggering 1 polarity 0 [ 0.723403] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.723528] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.723648] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.723719] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.723719] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.723719] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.724143] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.724264] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.724384] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.724504] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.724623] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.724743] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.724862] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.725296] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.725421] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.725539] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.725656] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.725774] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.726218] xen: registering gsi 4 triggering 1 polarity 0 [ 0.726224] Already setup the GSI :4 [ 0.726336] pnp 00:03: [dma 0 disabled] [ 0.726646] xen: registering gsi 3 triggering 1 polarity 0 [ 0.726660] pnp 00:04: [dma 0 disabled] [ 0.727268] pnp: PnP ACPI: found 5 devices [ 0.756688] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.756881] NET: Registered PF_INET protocol family [ 0.757044] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.757442] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.757594] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.757740] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.757891] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.758077] TCP: Hash tables configured (established 4096 bind 4096) [ 0.758254] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.758411] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.758563] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.758990] RPC: Registered named UNIX socket transport module. [ 0.759144] RPC: Registered udp transport module. [ 0.759259] RPC: Registered tcp transport module. [ 0.759372] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.759919] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.760118] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.760285] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.760447] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.760593] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.760767] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.760939] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.761084] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.761263] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.761388] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.761533] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.761676] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.761825] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.761947] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.762113] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.762268] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.762413] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.762536] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.762706] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.762851] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.762995] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.763140] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.763290] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.763433] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.763578] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.763712] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.763845] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.764022] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.764210] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.764383] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.764503] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.764641] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.764801] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.764919] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.765066] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.765238] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.765366] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.765507] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.765671] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.765790] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.765928] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.766142] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.766308] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.766462] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.766614] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.766773] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.766925] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.767094] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.767277] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.767433] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.767553] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.767692] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.767825] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.767998] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.768170] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.768292] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.768410] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.768530] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.768651] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.768769] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.768888] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.769032] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.769173] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.769294] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.769410] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.769534] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.769650] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.769768] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.769884] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.770002] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.770139] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.770262] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.770799] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.771028] xen: registering gsi 19 triggering 0 polarity 1 [ 0.771075] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.779856] xen: registering gsi 18 triggering 0 polarity 1 [ 0.779880] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.796396] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16203 usecs [ 0.796643] xen: registering gsi 18 triggering 0 polarity 1 [ 0.796648] Already setup the GSI :18 [ 0.813271] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16292 usecs [ 0.813483] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.813623] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.813709] Unpacking initramfs... [ 0.813784] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.814152] kvm: no hardware support for 'kvm_intel' [ 0.822005] has_svm: not amd or hygon [ 0.822181] kvm: no hardware support for 'kvm_amd' [ 0.822299] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.822857] clocksource: Switched to clocksource tsc [ 0.825552] Initialise system trusted keyrings [ 0.825805] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.827345] NFS: Registering the id_resolver key type [ 0.827470] Key type id_resolver registered [ 0.827632] Key type id_legacy registered [ 0.827816] 9p: Installing v9fs 9p2000 file system support [ 0.842084] Key type asymmetric registered [ 0.842211] Asymmetric key parser 'x509' registered [ 0.842349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.842516] io scheduler mq-deadline registered [ 0.842629] io scheduler kyber registered [ 0.843595] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843626] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.844150] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844156] Already setup the GSI :16 [ 0.844818] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844824] Already setup the GSI :16 [ 0.845144] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845148] Already setup the GSI :16 [ 0.845464] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845468] Already setup the GSI :16 [ 0.846092] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846097] Already setup the GSI :16 [ 0.846673] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846677] Already setup the GSI :16 [ 0.847150] xen: registering gsi 17 triggering 0 polarity 1 [ 0.847166] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.847511] xen: registering gsi 19 triggering 0 polarity 1 [ 0.847515] Already setup the GSI :19 [ 0.847952] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847957] Already setup the GSI :16 [ 0.848670] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.848844] ACPI: button: Power Button [PWRB] [ 0.848985] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.849229] ACPI: button: Power Button [PWRF] [ 0.849486] Monitor-Mwait will be used to enter C-1 state [ 0.849529] Monitor-Mwait will be used to enter C-2 state [ 0.849546] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.850031] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.850432] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.850759] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.851234] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.851590] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.852088] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.852610] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.853436] xen:xen_evtchn: Event-channel device installed [ 0.853645] xen_pciback: backend is vpci [ 0.854388] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.854734] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.855436] hpet_acpi_add: no address or irqs in _CRS [ 0.855652] Non-volatile memory driver v1.3 [ 0.855766] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.858373] loop: module loaded [ 0.864535] ahci 0000:00:1f.2: version 3.0 [ 0.864634] xen: registering gsi 16 triggering 0 polarity 1 [ 0.864644] Already setup the GSI :16 [ 0.864970] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.865125] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.880139] scsi host0: ahci [ 0.880521] scsi host1: ahci [ 0.880838] scsi host2: ahci [ 0.881153] scsi host3: ahci [ 0.881464] scsi host4: ahci [ 0.881882] scsi host5: ahci [ 0.882043] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.882190] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.882334] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.882477] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.882642] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.882786] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.883219] tun: Universal TUN/TAP device driver, 1.6 [ 0.883480] e100: Intel(R) PRO/100 Network Driver [ 0.883609] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.883747] sky2: driver version 1.30 [ 0.883932] xen_netfront: Initialising Xen virtual ethernet driver [ 0.884292] xen: registering gsi 18 triggering 0 polarity 1 [ 0.884302] Already setup the GSI :18 [ 0.884523] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.884706] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.884881] ehci-pci 0000:00:1a.0: debug port 2 [ 0.889019] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.895552] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.895775] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.895925] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.896070] usb usb1: Product: EHCI Host Controller [ 0.896184] usb usb1: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.896300] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.896597] hub 1-0:1.0: USB hub found [ 0.896722] hub 1-0:1.0: 2 ports detected [ 0.897089] xen: registering gsi 18 triggering 0 polarity 1 [ 0.897099] Already setup the GSI :18 [ 0.897291] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.897517] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.897693] ehci-pci 0000:00:1d.0: debug port 2 [ 0.901790] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.908560] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.908784] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.908931] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.909075] usb usb2: Product: EHCI Host Controller [ 0.909189] usb usb2: Manufacturer: Linux 6.1.87+ ehci_hcd [ 0.909304] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.909599] hub 2-0:1.0: USB hub found [ 0.909723] hub 2-0:1.0: 2 ports detected [ 0.910153] xen: registering gsi 19 triggering 0 polarity 1 [ 0.910163] Already setup the GSI :19 [ 0.910366] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.910637] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.911869] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.912342] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.912576] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.912724] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.912930] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.913077] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.913221] usb usb3: Product: xHCI Host Controller [ 0.913335] usb usb3: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.913450] usb usb3: SerialNumber: 0000:00:14.0 [ 0.913752] hub 3-0:1.0: USB hub found [ 0.913885] hub 3-0:1.0: 8 ports detected [ 0.915010] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.915173] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915320] usb usb4: Product: xHCI Host Controller [ 0.915433] usb usb4: Manufacturer: Linux 6.1.87+ xhci-hcd [ 0.915559] usb usb4: SerialNumber: 0000:00:14.0 [ 0.915817] hub 4-0:1.0: USB hub found [ 0.915948] hub 4-0:1.0: 6 ports detected [ 0.917067] usbcore: registered new interface driver usblp [ 0.917205] usbcore: registered new interface driver usb-storage [ 0.917354] i8042: PNP: No PS/2 controller found. [ 0.917695] rtc_cmos 00:00: RTC can wake from S4 [ 0.918383] rtc_cmos 00:00: registered as rtc0 [ 0.918563] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.918798] device-mapper: uevent: version 1.0.3 [ 0.919009] xen: registering gsi 18 triggering 0 polarity 1 [ 0.919021] Already setup the GSI :18 [ 0.919036] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.919180] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.919295] intel_pstate: CPU model not supported [ 0.919330] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.919430] hid: raw HID events driver (C) Jiri Kosina [ 0.919530] Freeing initrd memory: 19884K [ 0.919979] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.920014] usbcore: registered new interface driver usbhid [ 0.920215] usbhid: USB HID core driver [ 0.920788] Initializing XFRM netlink socket [ 0.921026] NET: Registered PF_INET6 protocol family [ 0.921547] Segment Routing with IPv6 [ 0.921666] In-situ OAM (IOAM) with IPv6 [ 0.921807] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.922051] NET: Registered PF_PACKET protocol family [ 0.922202] 9pnet: Installing 9P2000 support [ 0.922327] Key type dns_resolver registered [ 0.923009] IPI shorthand broadcast: enabled [ 0.923148] sched_clock: Marking stable (885477788, 37491633)->(1771803092, -848833671) [ 0.923745] registered taskstats version 1 [ 0.923860] Loading compiled-in X.509 certificates [ 0.926425] PM: Magic number: 4:23:501 [ 0.926682] printk: console [netcon0] enabled [ 0.926798] netconsole: network logging started [ 0.927137] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.939229] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.939607] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.940277] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.940452] ALSA device list: [ 0.940609] No soundcards found. [ 1.135642] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151667] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.151871] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.188494] ata1: SATA link down (SStatus 0 SControl 300) [ 1.188649] ata2: SATA link down (SStatus 0 SControl 300) [ 1.188804] ata4: SATA link down (SStatus 0 SControl 300) [ 1.188941] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.190250] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.196402] ata6: SATA link down (SStatus 0 SControl 300) [ 1.196715] ata5: SATA link down (SStatus 0 SControl 300) [ 1.272082] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272237] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272628] hub 1-1:1.0: USB hub found [ 1.272830] hub 1-1:1.0: 4 ports detected [ 1.274436] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.274623] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.279152] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.279307] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.279430] usb 3-3: Product: USB2.0 Hub [ 1.280083] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280235] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280457] hub 3-3:1.0: USB hub found [ 1.280751] hub 2-1:1.0: USB hub found [ 1.280883] hub 3-3:1.0: 4 ports detected [ 1.281017] hub 2-1:1.0: 4 ports detected [ 1.302173] ata3.00: configured for UDMA/133 [ 1.302537] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.303398] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.303512] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.303704] sd 2:0:0:0: [sda] Write Protect is off [ 1.303827] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.303886] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.304113] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.323359] sda: sda1 sda2 < sda5 > [ 1.323730] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.324899] Freeing unused kernel image (initmem) memory: 1580K [ 1.325027] Write protecting the kernel read-only data: 22528k [ 1.342754] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.344006] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.397568] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.523852] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.524006] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.524698] hub 3-4:1.0: USB hub found [ 1.524911] hub 3-4:1.0: 4 ports detected [ 1.587539] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.665008] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.665202] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.665347] usb 3-3.2: Product: USB2.0 Hub [ 1.666023] hub 3-3.2:1.0: USB hub found [ 1.666486] hub 3-3.2:1.0: 4 ports detected [ 1.801968] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.802094] Run /init as init process [ 1.802204] with arguments: [ 1.802205] /init [ 1.802206] placeholder [ 1.802207] with environment: [ 1.802208] HOME=/ [ 1.802209] TERM=linux [ 1.818549] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.924982] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.925143] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.931392] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.984815] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.987774] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.988078] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.245663] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.245826] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.246270] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.246486] xen: registering gsi 16 triggering 0 polarity 1 [ 2.247234] Already setup the GSI :16 [ 2.248808] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.248940] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.249152] xen: registering gsi 16 triggering 0 polarity 1 [ 2.249160] Already setup the GSI :16 [ 2.275129] pps pps0: new PPS source ptp0 [ 2.275343] igb 0000:07:00.0: added PHC on eth0 [ 2.275477] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.275609] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.275774] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.275889] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.276125] xen: registering gsi 17 triggering 0 polarity 1 [ 2.276134] Already setup the GSI :17 [ 2.305810] pps pps1: new PPS source ptp1 [ 2.306008] igb 0000:08:00.0: added PHC on eth1 [ 2.306141] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.306262] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.306427] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.306556] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.306785] xen: registering gsi 16 triggering 0 polarity 1 [ 2.306793] Already setup the GSI :16 [ 2.364498] igb 0000:0b:00.0: added PHC on eth2 [ 2.364651] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.364772] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.364975] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.365090] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.365318] xen: registering gsi 17 triggering 0 polarity 1 [ 2.365326] Already setup the GSI :17 [ 2.423461] igb 0000:0b:00.1: added PHC on eth3 [ 2.423625] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.423773] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.423976] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.424092] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.424354] xen: registering gsi 18 triggering 0 polarity 1 [ 2.424364] Already setup the GSI :18 [ 2.481964] igb 0000:0b:00.2: added PHC on eth4 [ 2.482106] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.482235] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.482455] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.482594] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.482836] xen: registering gsi 19 triggering 0 polarity 1 [ 2.482845] Already setup the GSI :19 [ 2.540333] igb 0000:0b:00.3: added PHC on eth5 [ 2.540471] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.540607] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.540810] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.540925] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.543728] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.555147] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.564002] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.572774] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.580847] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.589287] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.984461] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.114205] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.114455] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.403527] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.403847] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.404075] xen: registering gsi 17 triggering 0 polarity 1 [ 3.404086] Already setup the GSI :17 [ 4.152834] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.282440] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.282748] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.571511] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.573998] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.586020] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.991612] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.999465] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.483140] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.510278] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.526868] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.613662] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.161165] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.161331] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.161525] device enx0cc47a9f87be entered promiscuous mode [ 14.708122] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.813905] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.814194] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.814317] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.814610] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready