[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-20-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.071 MHz processor [ 0.000894] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000909] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001051] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001700] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001710] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018731] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018757] Using GB pages for direct mapping [ 0.019162] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019170] ACPI: Early table checksum verification disabled [ 0.019174] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019180] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019189] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019197] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019203] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019207] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019212] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019217] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019222] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019227] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019232] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019238] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019243] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019248] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019253] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019258] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019263] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019267] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019269] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019271] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019272] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019274] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019275] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019277] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019278] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019280] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019281] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019282] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019284] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019285] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019286] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019288] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019358] No NUMA configuration found [ 0.019359] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019375] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019908] Zone ranges: [ 0.019909] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019912] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019914] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019917] Device empty [ 0.019918] Movable zone start for each node [ 0.019922] Early memory node ranges [ 0.019923] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019925] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019927] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019931] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019938] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019995] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028126] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028421] ACPI: PM-Timer IO Port: 0x408 [ 0.028433] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028436] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028437] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028439] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028450] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028457] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028460] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028463] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028470] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028472] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028479] TSC deadline timer available [ 0.028481] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028501] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028504] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028506] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028507] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028508] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028511] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028512] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028513] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028515] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028516] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028517] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028518] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028519] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028521] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028522] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028523] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028526] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028528] Booting paravirtualized kernel on bare hardware [ 0.028531] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035885] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036282] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036291] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036295] pcpu-alloc: [0] 0 1 2 3 [ 0.036335] Fallback order for Node 0: 0 [ 0.036339] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036341] Policy zone: Normal [ 0.036343] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036413] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64", will be passed to user space. [ 0.036444] random: crng init done [ 0.037493] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038062] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038149] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038162] software IO TLB: area num 4. [ 0.080116] Memory: 2087172K/8353556K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2800K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080331] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080352] Kernel/User page tables isolation: enabled [ 0.080407] ftrace: allocating 40211 entries in 158 pages [ 0.090781] ftrace: allocated 158 pages with 5 groups [ 0.091724] Dynamic Preempt: voluntary [ 0.091768] rcu: Preemptible hierarchical RCU implementation. [ 0.091770] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091772] Trampoline variant of Tasks RCU enabled. [ 0.091773] Rude variant of Tasks RCU enabled. [ 0.091773] Tracing variant of Tasks RCU enabled. [ 0.091775] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091776] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.099189] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099395] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103842] Console: colour VGA+ 80x25 [ 1.028177] printk: console [ttyS0] enabled [ 1.032383] ACPI: Core revision 20220331 [ 1.037033] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046172] APIC: Switch to symmetric I/O mode setup [ 1.051152] DMAR: Host address width 46 [ 1.055002] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060327] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068251] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074525] DMAR: ATSR flags: 0x0 [ 1.077845] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.084119] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090479] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096840] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102247] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111369] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116765] x2apic enabled [ 1.119491] Switched APIC routing to cluster x2apic. [ 1.125002] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150167] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f26cb700b, max_idle_ns: 440795286383 ns [ 1.160684] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.14 BogoMIPS (lpj=7200284) [ 1.164714] CPU0: Thermal monitoring enabled (TM1) [ 1.168767] process: using mwait in idle threads [ 1.172684] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176681] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180684] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184683] Spectre V2 : Mitigation: Retpolines [ 1.188681] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192681] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196681] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200683] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204682] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208682] MDS: Mitigation: Clear CPU buffers [ 1.212681] MMIO Stale Data: Unknown: No mitigations [ 1.216687] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220681] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224681] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228682] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232681] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261258] Freeing SMP alternatives memory: 36K [ 1.264682] pid_max: default: 32768 minimum: 301 [ 1.268716] LSM: Security Framework initializing [ 1.272700] landlock: Up and running. [ 1.276681] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280712] AppArmor: AppArmor initialized [ 1.284683] TOMOYO Linux initialized [ 1.288688] LSM support for eBPF active [ 1.292728] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296697] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.305251] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.308870] cblist_init_generic: Setting adjustable number of callback queues. [ 1.312682] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.316712] cblist_init_generic: Setting adjustable number of callback queues. [ 1.320682] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.324704] cblist_init_generic: Setting adjustable number of callback queues. [ 1.328682] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.332702] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.336683] ... version: 3 [ 1.340681] ... bit width: 48 [ 1.344681] ... generic registers: 8 [ 1.348681] ... value mask: 0000ffffffffffff [ 1.352681] ... max period: 00007fffffffffff [ 1.356681] ... fixed-purpose events: 3 [ 1.360681] ... event mask: 00000007000000ff [ 1.364918] signal: max sigframe size: 1776 [ 1.368706] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.372714] rcu: Hierarchical SRCU implementation. [ 1.376682] rcu: Max phase no-delay instances is 1000. [ 1.381358] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.384774] smp: Bringing up secondary CPUs ... [ 1.388831] x86: Booting SMP configuration: [ 1.392687] .... node #0, CPUs: #1 #2 #3 [ 1.407899] smp: Brought up 1 node, 4 CPUs [ 1.412683] smpboot: Max logical packages: 1 [ 1.416682] smpboot: Total of 4 processors activated (14400.56 BogoMIPS) [ 1.441513] node 0 deferred pages initialised in 20ms [ 1.445121] devtmpfs: initialized [ 1.448762] x86/mm: Memory block size: 128MB [ 1.453736] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.456733] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.460838] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.464694] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.468743] pinctrl core: initialized pinctrl subsystem [ 1.473574] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.476960] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.480834] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.484835] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.488692] audit: initializing netlink subsys (disabled) [ 1.492697] audit: type=2000 audit(1714118350.404:1): state=initialized audit_enabled=0 res=1 [ 1.492834] thermal_sys: Registered thermal governor 'fair_share' [ 1.496685] thermal_sys: Registered thermal governor 'bang_bang' [ 1.500682] thermal_sys: Registered thermal governor 'step_wise' [ 1.504681] thermal_sys: Registered thermal governor 'user_space' [ 1.508681] thermal_sys: Registered thermal governor 'power_allocator' [ 1.512699] cpuidle: using governor ladder [ 1.520686] cpuidle: using governor menu [ 1.524655] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.524683] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.528781] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.532684] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.536691] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.541145] PCI: Using configuration type 1 for base access [ 1.544780] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.550016] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.552741] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.556684] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.564685] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.572682] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.577304] ACPI: Added _OSI(Module Device) [ 1.580685] ACPI: Added _OSI(Processor Device) [ 1.584682] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.592683] ACPI: Added _OSI(Processor Aggregator Device) [ 1.721151] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.750284] ACPI: Interpreter enabled [ 1.752704] ACPI: PM: (supports S0 S1 S4 S5) [ 1.756682] ACPI: Using IOAPIC for interrupt routing [ 1.764789] HEST: Table parsing has been initialized. [ 1.768810] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.772686] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.784682] PCI: Using E820 reservations for host bridge windows [ 1.789235] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.796794] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.800686] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.804690] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.804861] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.808680] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.820779] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.828842] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.836682] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.845047] PCI host bridge to bus 0000:00 [ 1.848684] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.856682] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.864682] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.868682] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.876682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.884682] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.892682] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.900682] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.908682] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.912713] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.916765] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.924807] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.932781] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.936850] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.944780] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.948849] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.956720] pci 0000:00:03.0: enabling Extended Tags [ 1.960746] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.968836] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.972699] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.980828] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.984698] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.992818] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 2.000698] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 2.004816] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.012698] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.016818] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.024698] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.032816] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.036698] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.044818] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.048701] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.056817] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.064698] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.068815] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.076812] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.080807] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.088694] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.096832] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.100802] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.108825] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.112702] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.120757] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.124773] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.132701] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.140756] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.144785] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.152698] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.156772] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.164788] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.168781] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.176712] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.180683] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.188786] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.192782] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.200706] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.204683] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.212810] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.216698] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.224773] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.228786] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.236827] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.240898] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.248695] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.252688] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.260688] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.264688] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.272688] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.276688] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.280726] pci 0000:00:1f.2: PME# supported from D3hot [ 2.288773] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.292700] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.300705] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.304758] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.312703] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.320844] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.324733] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.328732] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.332765] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.340705] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.348696] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.356691] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.360708] pci 0000:04:00.0: enabling Extended Tags [ 2.364788] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.372682] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.384938] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.388685] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.392690] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.400779] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.408717] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.412719] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.420700] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.424871] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.432905] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.436685] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.444684] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.452783] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.456717] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.464719] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.468700] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.476868] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.480896] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.484685] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.492684] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.500704] pci_bus 0000:07: extended config space not accessible [ 2.504707] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.512698] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.516690] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.524690] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.532729] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.540794] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.544686] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.552688] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.560682] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.568682] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.576682] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.584682] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.596682] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.604682] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.612682] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.620682] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.633487] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.636686] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.648701] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.656682] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.664750] PCI host bridge to bus 0000:ff [ 2.668683] pci_bus 0000:ff: root bus resource [bus ff] [ 2.672695] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.680762] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.684751] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.692746] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.696742] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.704744] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.708748] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.716740] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.724741] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.728742] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.736743] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.740740] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.748743] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.752746] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.760758] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.764771] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.772765] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.776765] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.784764] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.788764] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.796767] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.800765] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.808777] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.812766] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.820764] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.824766] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.832766] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.836765] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.844763] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.848742] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.856747] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.860743] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.868745] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.876741] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.880740] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.888903] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.892737] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.900734] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.904734] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.912752] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.916734] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.924734] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.928733] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.938369] iommu: Default domain type: Translated [ 2.940683] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.948781] pps_core: LinuxPPS API ver. 1 registered [ 2.952682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.960685] PTP clock support registered [ 2.964622] EDAC MC: Ver: 3.0.0 [ 2.968941] NetLabel: Initializing [ 2.972345] NetLabel: domain hash size = 128 [ 2.976684] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.984704] NetLabel: unlabeled traffic allowed by default [ 2.988682] PCI: Using ACPI for IRQ routing [ 2.999659] PCI: pci_cache_line_size set to 64 bytes [ 2.999784] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.999787] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 3.000720] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 3.004680] pci 0000:07:01.0: vgaarb: bridge control possible [ 3.004680] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.020689] vgaarb: loaded [ 3.025229] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.032682] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.038741] clocksource: Switched to clocksource tsc-early [ 3.042384] VFS: Disk quotas dquot_6.6.0 [ 3.046328] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.053400] AppArmor: AppArmor Filesystem Enabled [ 3.058132] pnp: PnP ACPI init [ 3.061348] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.067968] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.074578] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.081189] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.087934] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.095036] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.100961] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.108248] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.114370] pnp 00:07: [dma 0 disabled] [ 3.114616] pnp 00:08: [dma 0 disabled] [ 3.114902] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.120825] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.126741] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.132658] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.138579] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.145191] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.152150] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.158868] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.165072] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.172312] pnp: PnP ACPI: found 12 devices [ 3.183027] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.191994] NET: Registered PF_INET protocol family [ 3.197061] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.207395] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.215962] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.223786] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.232084] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.239881] TCP: Hash tables configured (established 65536 bind 65536) [ 3.246506] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.254056] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.260885] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.268180] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.273852] NET: Registered PF_XDP protocol family [ 3.278662] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.283635] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.288607] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.293583] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.298551] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.304649] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.312397] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.317367] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.323459] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.330248] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.335216] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.341310] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.348103] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.353072] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.359855] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.367597] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.373779] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.379958] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.386137] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.392316] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.399189] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.406062] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.413022] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.419981] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.425553] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.432771] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.438344] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.444611] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.450182] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.456448] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.462712] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.469933] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.476112] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.482290] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.488469] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.494648] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.501522] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.508392] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.515353] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.522405] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.553368] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23334 usecs [ 3.585356] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23998 usecs [ 3.592863] PCI: CLS 64 bytes, default 64 [ 3.596910] DMAR: No SATC found [ 3.596943] Trying to unpack rootfs image as initramfs... [ 3.600057] DMAR: dmar0: Using Queued invalidation [ 3.600136] pci 0000:00:00.0: Adding to iommu group 0 [ 3.615361] pci 0000:00:01.0: Adding to iommu group 1 [ 3.620442] pci 0000:00:01.1: Adding to iommu group 2 [ 3.625525] pci 0000:00:03.0: Adding to iommu group 3 [ 3.630610] pci 0000:00:04.0: Adding to iommu group 4 [ 3.635693] pci 0000:00:04.1: Adding to iommu group 5 [ 3.640776] pci 0000:00:04.2: Adding to iommu group 6 [ 3.645852] pci 0000:00:04.3: Adding to iommu group 7 [ 3.650929] pci 0000:00:04.4: Adding to iommu group 8 [ 3.656009] pci 0000:00:04.5: Adding to iommu group 9 [ 3.661088] pci 0000:00:04.6: Adding to iommu group 10 [ 3.666250] pci 0000:00:04.7: Adding to iommu group 11 [ 3.671417] pci 0000:00:05.0: Adding to iommu group 12 [ 3.676584] pci 0000:00:05.2: Adding to iommu group 13 [ 3.681760] pci 0000:00:05.4: Adding to iommu group 14 [ 3.686928] pci 0000:00:11.0: Adding to iommu group 15 [ 3.692118] pci 0000:00:16.0: Adding to iommu group 16 [ 3.697289] pci 0000:00:16.1: Adding to iommu group 16 [ 3.702467] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.707640] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.712811] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.717980] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.723149] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.728364] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.733530] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.738695] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.743857] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.749036] pci 0000:04:00.0: Adding to iommu group 23 [ 3.754207] pci 0000:05:00.0: Adding to iommu group 24 [ 3.759373] pci 0000:06:00.0: Adding to iommu group 25 [ 3.764528] pci 0000:07:01.0: Adding to iommu group 21 [ 3.769713] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.774895] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.780112] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.785285] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.790460] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.795636] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.800831] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.806000] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.811192] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.816363] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.821565] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.826737] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.831933] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.837106] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.842276] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.847448] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.852611] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.857780] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.862951] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.868114] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.873285] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.878458] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.883630] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.888796] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.893972] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.899146] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.904318] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.909503] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.914715] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.919890] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.925059] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.930235] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.935439] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.940615] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.945792] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.954823] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.961277] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.967717] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.976204] Initialise system trusted keyrings [ 3.980671] Key type blacklist registered [ 3.984770] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.993073] zbud: loaded [ 3.995935] integrity: Platform Keyring initialized [ 4.000825] integrity: Machine keyring initialized [ 4.005618] Key type asymmetric registered [ 4.009722] Asymmetric key parser 'x509' registered [ 4.040503] Freeing initrd memory: 39592K [ 4.051958] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.057747] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.065188] io scheduler mq-deadline registered [ 4.072158] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.078980] Monitor-Mwait will be used to enter C-1 state [ 4.078994] Monitor-Mwait will be used to enter C-2 state [ 4.079001] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.089172] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.096668] pstore: Registered erst as persistent store backend [ 4.102750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.109188] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.117319] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.125562] Linux agpgart interface v0.103 [ 4.129792] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.138960] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.145837] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.155422] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.160400] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.165621] mousedev: PS/2 mouse device common for all mice [ 4.171233] rtc_cmos 00:02: RTC can wake from S4 [ 4.176133] rtc_cmos 00:02: registered as rtc0 [ 4.180613] rtc_cmos 00:02: setting system clock to 2024-04-26T07:59:15 UTC (1714118355) [ 4.188737] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.196567] intel_pstate: Intel P-state driver initializing [ 4.202474] ledtrig-cpu: registered to indicate activity on CPUs [ 4.226312] NET: Registered PF_INET6 protocol family [ 4.240041] Segment Routing with IPv6 [ 4.243734] In-situ OAM (IOAM) with IPv6 [ 4.247697] mip6: Mobile IPv6 [ 4.250676] NET: Registered PF_PACKET protocol family [ 4.255822] mpls_gso: MPLS GSO support [ 4.260085] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.265632] microcode: Microcode Update Driver: v2.2. [ 4.265640] IPI shorthand broadcast: enabled [ 4.274993] sched_clock: Marking stable (3285707393, 989252350)->(4647478073, -372518330) [ 4.283420] registered taskstats version 1 [ 4.287535] Loading compiled-in X.509 certificates [ 4.331975] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.340700] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.351329] zswap: loaded using pool lzo/zbud [ 4.355918] Key type .fscrypt registered [ 4.359853] Key type fscrypt-provisioning registered [ 4.365184] pstore: Using crash dump compression: deflate [ 4.377815] Key type encrypted registered [ 4.381853] AppArmor: AppArmor sha1 policy hashing enabled [ 4.387348] ima: No TPM chip found, activating TPM-bypass! [ 4.392832] ima: Allocated hash algorithm: sha256 [ 4.397552] ima: No architecture policies found [ 4.402099] evm: Initialising EVM extended attributes: [ 4.407233] evm: security.selinux [ 4.410554] evm: security.SMACK64 (disabled) [ 4.414825] evm: security.SMACK64EXEC (disabled) [ 4.419444] evm: security.SMACK64TRANSMUTE (disabled) [ 4.424497] evm: security.SMACK64MMAP (disabled) [ 4.429116] evm: security.apparmor [ 4.432522] evm: security.ima [ 4.435496] evm: security.capability [ 4.439073] evm: HMAC attrs: 0x1 [ 4.621648] Freeing unused decrypted memory: 2036K [ 4.627123] Freeing unused kernel image (initmem) memory: 2800K [ 4.633119] Write protecting the kernel read-only data: 26624k [ 4.639671] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.646628] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 4.739226] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.745666] x86/mm: Checking user space page tables [ 4.824924] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.831367] Run /init as init process [ 4.835028] with arguments: [ 4.835030] /init [ 4.835032] with environment: [ 4.835033] HOME=/ [ 4.835034] TERM=linux [ 4.835035] BOOT_IMAGE=/vmlinuz-6.1.0-20-amd64 [ 4.993283] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999481] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.009792] clocksource: Switched to clocksource tsc [ 5.057132] e1000e: Intel(R) PRO/1000 Network Driver [ 5.062139] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.062508] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.068321] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.085704] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.091391] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.101096] SCSI subsystem initialized [ 5.101294] ACPI: bus type USB registered [ 5.109339] usbcore: registered new interface driver usbfs [ 5.115129] usbcore: registered new interface driver hub [ 5.120739] usbcore: registered new device driver usb [ 5.138119] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.138575] libata version 3.00 loaded. [ 5.143491] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.150947] ehci-pci 0000:00:1a.0: debug port 2 [ 5.153897] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.159449] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.173434] ahci 0000:00:1f.2: version 3.0 [ 5.181275] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.183745] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.187108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.195226] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.203479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.217741] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.218698] usb usb1: Product: EHCI Host Controller [ 5.226616] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.231487] usb usb1: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.231490] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.238444] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.244645] hub 1-0:1.0: USB hub found [ 5.249485] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.255781] hub 1-0:1.0: 2 ports detected [ 5.273194] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.273359] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.273898] scsi host0: ahci [ 5.274088] scsi host1: ahci [ 5.274237] scsi host2: ahci [ 5.274573] scsi host3: ahci [ 5.274875] scsi host4: ahci [ 5.275176] scsi host5: ahci [ 5.275240] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.275244] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.275246] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.275249] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.275251] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.275254] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.278433] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.284886] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.287767] ehci-pci 0000:00:1d.0: debug port 2 [ 5.308943] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.314378] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.315651] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.317782] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.337282] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.347514] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.354823] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.363823] scsi host6: isci [ 5.365551] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.365554] usb usb2: Product: EHCI Host Controller [ 5.366805] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.366810] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.366890] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.451331] usb usb2: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd [ 5.457425] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.462289] hub 2-0:1.0: USB hub found [ 5.466058] hub 2-0:1.0: 2 ports detected [ 5.588298] ata6: SATA link down (SStatus 0 SControl 300) [ 5.593743] ata2: SATA link down (SStatus 0 SControl 300) [ 5.597265] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.599191] ata5: SATA link down (SStatus 0 SControl 300) [ 5.611097] ata4: SATA link down (SStatus 0 SControl 300) [ 5.616528] ata3: SATA link down (SStatus 0 SControl 300) [ 5.622009] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.629016] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.636229] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.644150] ata1.00: configured for UDMA/133 [ 5.648495] scsi: waiting for bus probes to complete ... [ 5.725308] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.761631] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.769823] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.777343] hub 1-1:1.0: USB hub found [ 5.781300] hub 1-1:1.0: 6 ports detected [ 5.793495] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.803954] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.830262] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.837954] sd 0:0:0:0: [sda] Write Protect is off [ 5.838442] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.842749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.842770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.858009] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.890341] sda: sda1 sda2 < sda5 > [ 5.894125] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.899230] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.907419] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.914937] hub 2-1:1.0: USB hub found [ 5.918800] hub 2-1:1.0: 8 ports detected [ 6.073312] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.190788] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.199156] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.206468] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.211960] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.221178] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.233405] device-mapper: uevent: version 1.0.3 [ 6.234137] hid: raw HID events driver (C) Jiri Kosina [ 6.238144] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.257137] usbcore: registered new interface driver usbhid [ 6.262720] usbhid: USB HID core driver [ 6.268995] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.283846] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.298741] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.373533] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 7.111428] PM: Image not found (code -22) [ 7.483311] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.494968] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.646642] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.537070] dca service started, version 1.12.1 [ 9.561266] IPMI message handler: version 39.2 [ 9.602017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.610813] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.625353] ACPI: button: Power Button [PWRB] [ 9.632169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.640842] ACPI: button: Power Button [PWRF] [ 9.651490] ipmi device interface [ 9.673471] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.713360] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.779825] ipmi_si: IPMI System Interface driver [ 9.784576] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.790931] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.798152] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.804042] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.810085] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.858529] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.867244] ipmi_si: Adding ACPI-specified kcs state machine [ 9.872985] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.926835] ACPI: bus type drm_connector registered [ 9.940888] iTCO_vendor_support: vendor-support=0 [ 9.950401] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.960779] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.968706] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.974454] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.980113] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.999550] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.011115] cryptd: max_cpu_qlen set to 1000 [ 10.069980] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.080936] Console: switching to colour dummy device 80x25 [ 10.092317] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.101597] fbcon: mgag200drmfb (fb0) is primary device [ 10.121177] AVX version of gcm_enc/dec engaged. [ 10.121274] AES CTR mode by8 optimization enabled [ 10.157273] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.231675] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.272528] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.365682] ipmi_ssif: IPMI SSIF Interface driver [ 10.474131] Console: switching to colour frame buffer device 128x48 [ 10.591982] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.092194] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.092223] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.092231] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.092240] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.092248] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.092252] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.092261] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.092265] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.092274] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.092277] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.092286] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.092289] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.092298] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.092302] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.092310] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.092314] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.092321] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.092329] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.092337] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.092345] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.092353] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.092361] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.092369] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.092376] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.092386] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.092388] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.092398] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.092400] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.092410] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.092549] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.103627] EDAC sbridge: Ver: 1.1.2 [ 11.216878] intel_rapl_common: Found RAPL domain package [ 11.222210] intel_rapl_common: Found RAPL domain core [ 11.227264] intel_rapl_common: Found RAPL domain dram [ 12.357821] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.584188] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.615430] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.663956] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.274668] audit: type=1400 audit(1714118365.524:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 14.291125] audit: type=1400 audit(1714118365.524:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 14.307043] audit: type=1400 audit(1714118365.524:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 14.331867] audit: type=1400 audit(1714118365.580:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 14.347166] audit: type=1400 audit(1714118365.580:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 14.362130] audit: type=1400 audit(1714118365.580:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 14.523973] audit: type=1400 audit(1714118365.772:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1077 comm="apparmor_parser" [ 14.539277] audit: type=1400 audit(1714118365.784:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.557250] audit: type=1400 audit(1714118365.788:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.574733] audit: type=1400 audit(1714118365.788:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.806360] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.816283] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready