[ 0.000000] Linux version 6.1.90+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu May 9 14:54:14 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000471] tsc: Detected 3092.840 MHz processor [ 0.000838] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000842] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000848] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000850] Disabled [ 0.000851] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000856] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000902] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021613] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.021628] ACPI: Early table checksum verification disabled [ 0.023332] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.023345] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.023404] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023479] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023493] ACPI: FACS 0x0000000095FBD000 000040 [ 0.023508] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023523] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023536] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.023551] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.023564] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023579] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023592] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023607] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.023620] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023634] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023649] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023663] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023676] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023690] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023705] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023719] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023732] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023746] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023801] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023816] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023829] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023843] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023856] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023864] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.023865] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.023867] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.023868] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.023868] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.023869] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.023870] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.023871] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.023871] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.023872] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.023873] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.023874] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.023875] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.023875] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.023876] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.023877] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.023878] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.023879] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.023879] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.023880] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.023881] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.023882] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.023882] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.023883] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.023884] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.023884] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.023944] Setting APIC routing to Xen PV. [ 0.027011] Zone ranges: [ 0.027014] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.027016] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.027018] Normal empty [ 0.027019] Movable zone start for each node [ 0.027019] Early memory node ranges [ 0.027020] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.027022] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.027023] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.027031] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.027112] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.030598] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.030603] p2m virtual area at (____ptrval____), size is 40000000 [ 0.170563] Remapped 97 page(s) [ 0.171303] ACPI: PM-Timer IO Port: 0x1808 [ 0.171360] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.171400] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.171416] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.171422] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.171447] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.171453] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.171463] ACPI: SPCR: SPCR table version 1 [ 0.171466] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.171519] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.171540] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.171542] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.171544] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.171550] Booting kernel on Xen [ 0.171551] Xen version: 4.19-unstable (preserve-AD) [ 0.171556] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.177070] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.177614] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.177622] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.177625] pcpu-alloc: [0] 0 1 2 3 [ 0.177705] xen: PV spinlocks enabled [ 0.177711] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.177719] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.177721] Kernel command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.177788] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.177809] random: crng init done [ 0.177887] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.177929] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.178545] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.178551] software IO TLB: area num 4. [ 0.255072] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.255207] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.257537] Dynamic Preempt: voluntary [ 0.257610] rcu: Preemptible hierarchical RCU implementation. [ 0.257611] rcu: RCU event tracing is enabled. [ 0.257612] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.257613] Trampoline variant of Tasks RCU enabled. [ 0.257615] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.257616] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.265266] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.265383] xen:events: Using FIFO-based ABI [ 0.265411] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.265417] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.265422] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.265427] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.265433] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.265438] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.265444] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.265449] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.265454] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.265461] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.265467] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.265472] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.265477] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.265483] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.265488] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.265499] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.274582] Console: colour VGA+ 80x25 [ 0.293718] printk: console [tty0] enabled [ 0.294788] printk: console [hvc0] enabled [ 0.294935] ACPI: Core revision 20220331 [ 0.315747] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.315953] Xen: using vcpuop timer interface [ 0.315964] installing Xen timer for CPU 0 [ 0.316153] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94dc1ce7d, max_idle_ns: 440795323863 ns [ 0.316336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.68 BogoMIPS (lpj=3092840) [ 0.316667] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.316811] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.316964] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.317346] Spectre V2 : Mitigation: Retpolines [ 0.317521] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.317695] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.317839] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.317986] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.318162] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.318306] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.318340] MDS: Mitigation: Clear CPU buffers [ 0.318578] MMIO Stale Data: Unknown: No mitigations [ 0.318719] SRBDS: Unknown: Dependent on hypervisor status [ 0.318881] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.319052] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.319195] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.319334] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.319481] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.337626] Freeing SMP alternatives memory: 40K [ 0.337791] pid_max: default: 32768 minimum: 301 [ 0.337954] LSM: Security Framework initializing [ 0.338100] SELinux: Initializing. [ 0.338277] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.338340] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.339456] cpu 0 spinlock event irq 25 [ 0.339601] VPMU disabled by hypervisor. [ 0.340005] cblist_init_generic: Setting adjustable number of callback queues. [ 0.340178] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.340356] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.340532] signal: max sigframe size: 1776 [ 0.340709] rcu: Hierarchical SRCU implementation. [ 0.340885] rcu: Max phase no-delay instances is 400. [ 0.341349] smp: Bringing up secondary CPUs ... [ 0.341657] installing Xen timer for CPU 1 [ 0.342119] cpu 1 spinlock event irq 35 [ 0.342498] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.343346] installing Xen timer for CPU 2 [ 0.343748] cpu 2 spinlock event irq 41 [ 0.343748] installing Xen timer for CPU 3 [ 0.344523] cpu 3 spinlock event irq 47 [ 0.344523] smp: Brought up 1 node, 4 CPUs [ 0.344590] smpboot: Max logical packages: 1 [ 0.345343] devtmpfs: initialized [ 0.345609] x86/mm: Memory block size: 128MB [ 0.345907] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.345907] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.346343] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.346609] PM: RTC time: 16:08:01, date: 2024-05-09 [ 0.346881] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.347049] xen:grant_table: Grant tables using version 1 layout [ 0.347207] Grant table initialized [ 0.347446] audit: initializing netlink subsys (disabled) [ 0.347600] audit: type=2000 audit(1715270881.959:1): state=initialized audit_enabled=0 res=1 [ 0.347600] thermal_sys: Registered thermal governor 'step_wise' [ 0.347600] thermal_sys: Registered thermal governor 'user_space' [ 0.347600] Simple Boot Flag at 0x44 set to 0x1 [ 0.348365] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.348666] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.348853] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.394008] PCI: Using configuration type 1 for base access [ 0.394211] PCI: Dell System detected, enabling pci=bfsort. [ 0.396380] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.396399] ACPI: Added _OSI(Module Device) [ 0.396507] ACPI: Added _OSI(Processor Device) [ 0.396642] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.396780] ACPI: Added _OSI(Processor Aggregator Device) [ 0.407852] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.408624] xen: registering gsi 9 triggering 0 polarity 0 [ 0.409094] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.410766] ACPI: Dynamic OEM Table Load: [ 0.410915] ACPI: SSDT 0xFFFF888003589C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.411847] ACPI: Dynamic OEM Table Load: [ 0.411992] ACPI: SSDT 0xFFFF8880036F5800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.412801] ACPI: Dynamic OEM Table Load: [ 0.412979] ACPI: SSDT 0xFFFF88800354F800 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.414266] ACPI: Interpreter enabled [ 0.414356] ACPI: PM: (supports S0 S4 S5) [ 0.414494] ACPI: Using IOAPIC for interrupt routing [ 0.414655] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.414833] PCI: Using E820 reservations for host bridge windows [ 0.415221] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.421252] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.429125] ACPI: PM: Power Resource [FN00] [ 0.429298] ACPI: PM: Power Resource [FN01] [ 0.429374] ACPI: PM: Power Resource [FN02] [ 0.429575] ACPI: PM: Power Resource [FN03] [ 0.429742] ACPI: PM: Power Resource [FN04] [ 0.430605] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.430755] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.431798] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.431944] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.432630] PCI host bridge to bus 0000:00 [ 0.432767] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.432912] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.433057] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.433230] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.433338] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.433509] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.434054] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.434305] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.434610] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.434977] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.435170] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.435661] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.435978] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.436467] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.436689] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.436836] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.437351] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.437845] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.438062] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.438206] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.438737] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.438932] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.439397] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.439718] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.440402] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.440595] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.440764] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.440934] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.441102] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.441268] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.441371] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.441717] pci 0000:00:1f.2: PME# supported from D3hot [ 0.441998] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.442212] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.442424] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.442985] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.443312] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.443461] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.443771] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.444032] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.444710] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.445484] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.445782] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.446148] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.446510] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.446771] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.447438] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.448264] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.448378] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.449118] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.452273] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.453813] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.453968] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.454131] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.455641] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.459218] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.461095] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.464853] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.468498] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.468864] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.469131] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.470663] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.475457] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.475815] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.476097] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.477380] pci_bus 0000:05: extended config space not accessible [ 0.477757] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.478418] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.479628] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.480029] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.481527] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.485003] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.485337] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.485662] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.487457] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.488097] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.488535] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.490976] pci 0000:06:00.0: PME# supported from D3hot [ 0.491978] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.492337] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.493672] pci_bus 0000:00: on NUMA node 0 [ 0.493872] xen: registering gsi 13 triggering 1 polarity 0 [ 0.494933] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.495145] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.495366] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.495585] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.495804] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.495941] ACPI: PCI: Interrupt link LNKE disabled [ 0.496192] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.496337] ACPI: PCI: Interrupt link LNKF disabled [ 0.496544] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.496683] ACPI: PCI: Interrupt link LNKG disabled [ 0.496891] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.498640] xen:balloon: Initialising balloon driver [ 0.498795] iommu: Default domain type: Translated [ 0.498795] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.498795] SCSI subsystem initialized [ 0.499367] libata version 3.00 loaded. [ 0.499367] ACPI: bus type USB registered [ 0.499511] usbcore: registered new interface driver usbfs [ 0.499657] usbcore: registered new interface driver hub [ 0.499800] usbcore: registered new device driver usb [ 0.499946] pps_core: LinuxPPS API ver. 1 registered [ 0.500085] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.500341] PTP clock support registered [ 0.500492] Advanced Linux Sound Architecture Driver Initialized. [ 0.500636] NetLabel: Initializing [ 0.500773] NetLabel: domain hash size = 128 [ 0.500905] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.501058] NetLabel: unlabeled traffic allowed by default [ 0.501361] PCI: Using ACPI for IRQ routing [ 0.517820] PCI: pci_cache_line_size set to 64 bytes [ 0.518431] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.518433] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.518494] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.518639] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.518780] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.518989] vgaarb: loaded [ 0.520496] clocksource: Switched to clocksource tsc-early [ 0.520722] VFS: Disk quotas dquot_6.6.0 [ 0.520867] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.521027] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.521206] pnp: PnP ACPI init [ 0.521320] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.521468] system 00:00: [io 0xffff] has been reserved [ 0.521608] system 00:00: [io 0xffff] has been reserved [ 0.521744] system 00:00: [io 0xffff] has been reserved [ 0.521884] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.522064] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.522191] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.522416] xen: registering gsi 8 triggering 1 polarity 0 [ 0.522467] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.522909] xen: registering gsi 3 triggering 1 polarity 0 [ 0.523173] xen: registering gsi 4 triggering 1 polarity 0 [ 0.523176] Already setup the GSI :4 [ 0.523530] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.523671] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.523817] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.523956] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.524105] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.524250] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.524400] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.524545] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.524691] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.524834] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.524979] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.526027] pnp: PnP ACPI: found 7 devices [ 0.546495] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.546688] NET: Registered PF_INET protocol family [ 0.546891] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.547217] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.547403] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.547586] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.547781] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.547966] TCP: Hash tables configured (established 4096 bind 4096) [ 0.548125] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.548306] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.548478] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.548794] RPC: Registered named UNIX socket transport module. [ 0.548939] RPC: Registered udp transport module. [ 0.549076] RPC: Registered tcp transport module. [ 0.549212] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.549618] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.549799] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.549984] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.550156] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.550322] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.550485] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.550633] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.550816] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.551092] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.551332] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.551742] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.552024] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.552260] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.552642] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.552960] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.553473] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.553745] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.553971] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.554393] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.554577] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.554729] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.554919] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.555062] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.555201] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.555357] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.555498] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.555639] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.555810] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.555953] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.556157] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.556294] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.556471] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.556608] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.556781] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.556921] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.557094] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.557378] xen: registering gsi 16 triggering 0 polarity 1 [ 0.557397] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.558882] xen: registering gsi 16 triggering 0 polarity 1 [ 0.558886] Already setup the GSI :16 [ 0.570459] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 11358 usecs [ 0.570702] xen: registering gsi 23 triggering 0 polarity 1 [ 0.570716] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.582461] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 11527 usecs [ 0.582941] PCI: CLS 64 bytes, default 64 [ 0.583083] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.583133] Unpacking initramfs... [ 0.583229] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.583659] kvm: no hardware support for 'kvm_intel' [ 0.583801] has_svm: not amd or hygon [ 0.583930] kvm: no hardware support for 'kvm_amd' [ 0.584072] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94dc1ce7d, max_idle_ns: 440795323863 ns [ 0.584297] clocksource: Switched to clocksource tsc [ 0.585299] Initialise system trusted keyrings [ 0.585508] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.586609] NFS: Registering the id_resolver key type [ 0.586758] Key type id_resolver registered [ 0.586906] Key type id_legacy registered [ 0.587088] 9p: Installing v9fs 9p2000 file system support [ 0.597011] Key type asymmetric registered [ 0.597155] Asymmetric key parser 'x509' registered [ 0.597310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.597494] io scheduler mq-deadline registered [ 0.597632] io scheduler kyber registered [ 0.599078] xen: registering gsi 16 triggering 0 polarity 1 [ 0.599084] Already setup the GSI :16 [ 0.599434] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.599802] xen: registering gsi 18 triggering 0 polarity 1 [ 0.599818] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.600011] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.604437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.604677] ACPI: button: Power Button [PWRF] [ 0.605232] Monitor-Mwait will be used to enter C-1 state [ 0.605254] Monitor-Mwait will be used to enter C-2 state [ 0.605267] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.605553] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.617486] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.617988] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.627488] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.627640] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.628018] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.628164] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.628549] xen:xen_evtchn: Event-channel device installed [ 0.628743] xen_pciback: backend is vpci [ 0.629284] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.629526] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.630168] hpet_acpi_add: no address or irqs in _CRS [ 0.630420] Non-volatile memory driver v1.3 [ 0.630559] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.632313] loop: module loaded [ 0.635877] ahci 0000:00:1f.2: version 3.0 [ 0.635976] xen: registering gsi 19 triggering 0 polarity 1 [ 0.635998] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.636156] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.636374] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.636549] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.643341] scsi host0: ahci [ 0.643681] scsi host1: ahci [ 0.644023] scsi host2: ahci [ 0.644278] scsi host3: ahci [ 0.644538] scsi host4: ahci [ 0.644797] scsi host5: ahci [ 0.644974] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.645148] ata2: DUMMY [ 0.645276] ata3: DUMMY [ 0.645406] ata4: DUMMY [ 0.645569] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.645742] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.646096] tun: Universal TUN/TAP device driver, 1.6 [ 0.646412] xen: registering gsi 16 triggering 0 polarity 1 [ 0.646418] Already setup the GSI :16 [ 0.654385] Freeing initrd memory: 19884K [ 0.681417] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:88 [ 0.681604] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.681786] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.681973] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.682521] xen: registering gsi 17 triggering 0 polarity 1 [ 0.682543] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.732878] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:8a [ 0.733066] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.733246] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.733420] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.734005] e100: Intel(R) PRO/100 Network Driver [ 0.734145] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.734295] sky2: driver version 1.30 [ 0.734456] xen_netfront: Initialising Xen virtual ethernet driver [ 0.734753] xen: registering gsi 16 triggering 0 polarity 1 [ 0.734757] Already setup the GSI :16 [ 0.734965] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.735166] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.735369] ehci-pci 0000:00:1a.0: debug port 2 [ 0.739533] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.745891] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.746102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.746272] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.746481] usb usb1: Product: EHCI Host Controller [ 0.746621] usb usb1: Manufacturer: Linux 6.1.90+ ehci_hcd [ 0.746762] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.747079] hub 1-0:1.0: USB hub found [ 0.747225] hub 1-0:1.0: 2 ports detected [ 0.747571] xen: registering gsi 23 triggering 0 polarity 1 [ 0.747575] Already setup the GSI :23 [ 0.747760] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.748033] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.748236] ehci-pci 0000:00:1d.0: debug port 2 [ 0.752373] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.758861] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.759066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.759235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.759407] usb usb2: Product: EHCI Host Controller [ 0.759546] usb usb2: Manufacturer: Linux 6.1.90+ ehci_hcd [ 0.759681] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.759952] hub 2-0:1.0: USB hub found [ 0.760099] hub 2-0:1.0: 2 ports detected [ 0.760505] xen: registering gsi 16 triggering 0 polarity 1 [ 0.760508] Already setup the GSI :16 [ 0.760707] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.760914] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.762161] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.762599] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.762808] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.762994] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.763200] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.763412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.763583] usb usb3: Product: xHCI Host Controller [ 0.763724] usb usb3: Manufacturer: Linux 6.1.90+ xhci-hcd [ 0.763872] usb usb3: SerialNumber: 0000:00:14.0 [ 0.764150] hub 3-0:1.0: USB hub found [ 0.764307] hub 3-0:1.0: 10 ports detected [ 0.767718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.767905] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.768112] usb usb4: Product: xHCI Host Controller [ 0.768252] usb usb4: Manufacturer: Linux 6.1.90+ xhci-hcd [ 0.768393] usb usb4: SerialNumber: 0000:00:14.0 [ 0.768689] hub 4-0:1.0: USB hub found [ 0.768857] hub 4-0:1.0: 2 ports detected [ 0.769392] usbcore: registered new interface driver usblp [ 0.769546] usbcore: registered new interface driver usb-storage [ 0.769746] i8042: PNP: No PS/2 controller found. [ 0.769979] rtc_cmos 00:02: RTC can wake from S4 [ 0.770538] rtc_cmos 00:02: registered as rtc0 [ 0.770713] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.770913] device-mapper: uevent: version 1.0.3 [ 0.770985] xen: registering gsi 18 triggering 0 polarity 1 [ 0.771053] Already setup the GSI :18 [ 0.771103] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.771303] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.771366] intel_pstate: CPU model not supported [ 0.771648] hid: raw HID events driver (C) Jiri Kosina [ 0.771887] usbcore: registered new interface driver usbhid [ 0.772028] usbhid: USB HID core driver [ 0.772425] Initializing XFRM netlink socket [ 0.772627] NET: Registered PF_INET6 protocol family [ 0.773162] Segment Routing with IPv6 [ 0.773298] In-situ OAM (IOAM) with IPv6 [ 0.773454] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.773676] NET: Registered PF_PACKET protocol family [ 0.773856] 9pnet: Installing 9P2000 support [ 0.774006] Key type dns_resolver registered [ 0.774401] IPI shorthand broadcast: enabled [ 0.774549] sched_clock: Marking stable (723540317, 50831919)->(791875530, -17503294) [ 0.775001] registered taskstats version 1 [ 0.775138] Loading compiled-in X.509 certificates [ 0.776072] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.776755] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.777042] PM: Magic number: 8:431:135 [ 0.777194] block nbd14: hash matches [ 0.777381] printk: console [netcon0] enabled [ 0.777519] netconsole: network logging started [ 0.777858] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.786280] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.786585] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.786855] ALSA device list: [ 0.787000] No soundcards found. [ 0.787146] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.954186] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.989893] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.997848] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.003809] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.004684] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.005847] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 1.005910] ata1.00: configured for UDMA/100 [ 1.006296] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.007199] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.007232] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.007537] sd 0:0:0:0: [sda] Write Protect is off [ 1.007672] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.007711] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.007943] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.118299] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.118465] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.118911] hub 1-1:1.0: USB hub found [ 1.130384] hub 1-1:1.0: 4 ports detected [ 1.130627] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.130793] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.131151] hub 2-1:1.0: USB hub found [ 1.131491] hub 2-1:1.0: 6 ports detected [ 1.142648] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.142925] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.143064] usb 3-9: Product: Gadget USB HUB [ 1.143193] usb 3-9: Manufacturer: no manufacturer [ 1.143324] usb 3-9: SerialNumber: 0123456789 [ 1.144337] hub 3-9:1.0: USB hub found [ 1.144572] hub 3-9:1.0: 6 ports detected [ 1.195659] sda: sda1 sda2 < sda5 > [ 1.196107] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.314118] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.317051] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.321765] ata5.00: configured for UDMA/100 [ 1.326891] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.367416] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.367598] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.387318] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.387421] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.437869] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.524762] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.524950] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.525124] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.525266] usb 3-9.1: Manufacturer: Avocent [ 1.525436] usb 3-9.1: SerialNumber: 20120917 [ 1.532352] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.584105] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.585092] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.585417] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.586258] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.586563] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.698199] ata6: SATA link down (SStatus 0 SControl 300) [ 1.699105] Freeing unused kernel image (initmem) memory: 1580K [ 1.699257] Write protecting the kernel read-only data: 22528k [ 1.711812] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.712719] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.906029] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.906175] Run /init as init process [ 1.906311] with arguments: [ 1.906312] /init [ 1.906312] placeholder [ 1.906313] with environment: [ 1.906314] HOME=/ [ 1.906315] TERM=linux [ 2.132446] tg3 0000:01:00.0 enx549f3505fd88: renamed from eth0 [ 2.138296] tg3 0000:01:00.1 enx549f3505fd8a: renamed from eth1 [ 2.886717] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.120724] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.434862] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.208522] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.223722] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.287998] Adding 1949692k swap on /dev/mapper/godello1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.783335] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 8.783522] xenbr0: port 1(enx549f3505fd88) entered disabled state [ 8.783703] device enx549f3505fd88 entered promiscuous mode [ 12.379871] tg3 0000:01:00.0 enx549f3505fd88: Link is up at 1000 Mbps, full duplex [ 12.380085] tg3 0000:01:00.0 enx549f3505fd88: Flow control is off for TX and off for RX [ 12.380261] tg3 0000:01:00.0 enx549f3505fd88: EEE is disabled [ 12.380477] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd88: link becomes ready [ 12.380671] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 12.380817] xenbr0: port 1(enx549f3505fd88) entered forwarding state [ 12.380996] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready